From: Daniel Lezcano <daniel.lezcano@linaro.org>
Date: Mon, 6 Jun 2016 15:58:43 +0000 (+0200)
Subject: clocksource/drivers/qcom: Convert init function to return error
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ab51189ca48520debe92ed7738a49c185b0f57d5;p=openwrt%2Fstaging%2Fblogic.git

clocksource/drivers/qcom: Convert init function to return error

The init functions do not return any error. They behave as the following:

  - panic, thus leading to a kernel crash while another timer may work and
       make the system boot up correctly

  or

  - print an error and let the caller unaware if the state of the system

Change that by converting the init functions to return an error conforming
to the CLOCKSOURCE_OF_RET prototype.

Proper error handling (rollback, errno value) will be changed later case
by case, thus this change just return back an error or success in the init
function.

Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
---

diff --git a/drivers/clocksource/qcom-timer.c b/drivers/clocksource/qcom-timer.c
index f8e09f923651..79f73bddc5f4 100644
--- a/drivers/clocksource/qcom-timer.c
+++ b/drivers/clocksource/qcom-timer.c
@@ -178,7 +178,7 @@ static struct delay_timer msm_delay_timer = {
 	.read_current_timer = msm_read_current_timer,
 };
 
-static void __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
+static int __init msm_timer_init(u32 dgt_hz, int sched_bits, int irq,
 				  bool percpu)
 {
 	struct clocksource *cs = &msm_clocksource;
@@ -218,12 +218,14 @@ err:
 	sched_clock_register(msm_sched_clock_read, sched_bits, dgt_hz);
 	msm_delay_timer.freq = dgt_hz;
 	register_current_timer_delay(&msm_delay_timer);
+
+	return res;
 }
 
-static void __init msm_dt_timer_init(struct device_node *np)
+static int __init msm_dt_timer_init(struct device_node *np)
 {
 	u32 freq;
-	int irq;
+	int irq, ret;
 	struct resource res;
 	u32 percpu_offset;
 	void __iomem *base;
@@ -232,34 +234,35 @@ static void __init msm_dt_timer_init(struct device_node *np)
 	base = of_iomap(np, 0);
 	if (!base) {
 		pr_err("Failed to map event base\n");
-		return;
+		return -ENXIO;
 	}
 
 	/* We use GPT0 for the clockevent */
 	irq = irq_of_parse_and_map(np, 1);
 	if (irq <= 0) {
 		pr_err("Can't get irq\n");
-		return;
+		return -EINVAL;
 	}
 
 	/* We use CPU0's DGT for the clocksource */
 	if (of_property_read_u32(np, "cpu-offset", &percpu_offset))
 		percpu_offset = 0;
 
-	if (of_address_to_resource(np, 0, &res)) {
+	ret = of_address_to_resource(np, 0, &res);
+	if (ret) {
 		pr_err("Failed to parse DGT resource\n");
-		return;
+		return ret;
 	}
 
 	cpu0_base = ioremap(res.start + percpu_offset, resource_size(&res));
 	if (!cpu0_base) {
 		pr_err("Failed to map source base\n");
-		return;
+		return -EINVAL;
 	}
 
 	if (of_property_read_u32(np, "clock-frequency", &freq)) {
 		pr_err("Unknown frequency\n");
-		return;
+		return -EINVAL;
 	}
 
 	event_base = base + 0x4;
@@ -268,7 +271,7 @@ static void __init msm_dt_timer_init(struct device_node *np)
 	freq /= 4;
 	writel_relaxed(DGT_CLK_CTL_DIV_4, source_base + DGT_CLK_CTL);
 
-	msm_timer_init(freq, 32, irq, !!percpu_offset);
+	return msm_timer_init(freq, 32, irq, !!percpu_offset);
 }
-CLOCKSOURCE_OF_DECLARE(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
-CLOCKSOURCE_OF_DECLARE(scss_timer, "qcom,scss-timer", msm_dt_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(kpss_timer, "qcom,kpss-timer", msm_dt_timer_init);
+CLOCKSOURCE_OF_DECLARE_RET(scss_timer, "qcom,scss-timer", msm_dt_timer_init);