From: Christian Marangi Date: Mon, 25 Sep 2023 15:38:00 +0000 (+0200) Subject: ipq40xx: drop patches/files/config for kernel 5.15 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=ab015abd4a03b8e9ef83d1b01cc2038d9ced9dec;p=openwrt%2Fstaging%2Fthess.git ipq40xx: drop patches/files/config for kernel 5.15 Drop patches/files/config for kernel 5.15 now that they are not used anymore. Signed-off-by: Christian Marangi --- diff --git a/target/linux/ipq40xx/config-5.15 b/target/linux/ipq40xx/config-5.15 deleted file mode 100644 index f1fc501010..0000000000 --- a/target/linux/ipq40xx/config-5.15 +++ /dev/null @@ -1,509 +0,0 @@ -CONFIG_ALIGNMENT_TRAP=y -# CONFIG_APQ_GCC_8084 is not set -# CONFIG_APQ_MMCC_8084 is not set -CONFIG_ARCH_32BIT_OFF_T=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_IPQ40XX=y -CONFIG_ARCH_KEEP_MEMBLOCK=y -# CONFIG_ARCH_MDM9615 is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -# CONFIG_ARCH_MSM8960 is not set -# CONFIG_ARCH_MSM8974 is not set -# CONFIG_ARCH_MSM8X60 is not set -CONFIG_ARCH_MULTIPLATFORM=y -CONFIG_ARCH_MULTI_V6_V7=y -CONFIG_ARCH_MULTI_V7=y -CONFIG_ARCH_NR_GPIO=0 -CONFIG_ARCH_OPTIONAL_KERNEL_RWX=y -CONFIG_ARCH_OPTIONAL_KERNEL_RWX_DEFAULT=y -CONFIG_ARCH_QCOM=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARM=y -CONFIG_ARM_AMBA=y -CONFIG_ARM_APPENDED_DTB=y -CONFIG_ARM_ARCH_TIMER=y -CONFIG_ARM_ARCH_TIMER_EVTSTREAM=y -# CONFIG_ARM_ATAG_DTB_COMPAT is not set -CONFIG_ARM_CPUIDLE=y -# CONFIG_ARM_CPU_TOPOLOGY is not set -CONFIG_ARM_CRYPTO=y -CONFIG_ARM_GIC=y -CONFIG_ARM_HAS_SG_CHAIN=y -CONFIG_ARM_L1_CACHE_SHIFT=6 -CONFIG_ARM_L1_CACHE_SHIFT_6=y -CONFIG_ARM_PATCH_IDIV=y -CONFIG_ARM_PATCH_PHYS_VIRT=y -# CONFIG_ARM_QCOM_CPUFREQ_HW is not set -# CONFIG_ARM_QCOM_CPUFREQ_NVMEM is not set -# CONFIG_ARM_QCOM_SPM_CPUIDLE is not set -# CONFIG_ARM_SMMU is not set -CONFIG_ARM_THUMB=y -CONFIG_ARM_UNWIND=y -CONFIG_ARM_VIRT_EXT=y -CONFIG_AT803X_PHY=y -CONFIG_AUTO_ZRELADDR=y -CONFIG_BCH=y -CONFIG_BINFMT_FLAT_ARGVP_ENVP_ON_STACK=y -CONFIG_BLK_DEV_LOOP=y -CONFIG_BLK_MQ_PCI=y -CONFIG_BOUNCE=y -# CONFIG_CACHE_L2X0 is not set -CONFIG_CLKSRC_QCOM=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_CMDLINE_PARTITION=y -CONFIG_COMMON_CLK=y -CONFIG_COMMON_CLK_QCOM=y -CONFIG_COMPAT_32BIT_TIME=y -CONFIG_CPUFREQ_DT=y -CONFIG_CPUFREQ_DT_PLATDEV=y -CONFIG_CPU_32v6K=y -CONFIG_CPU_32v7=y -CONFIG_CPU_ABRT_EV7=y -CONFIG_CPU_CACHE_V7=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -CONFIG_CPU_FREQ_GOV_ATTR_SET=y -CONFIG_CPU_FREQ_GOV_COMMON=y -# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_STAT=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -CONFIG_CPU_IDLE_MULTIPLE_DRIVERS=y -CONFIG_CPU_PABRT_V7=y -CONFIG_CPU_PM=y -CONFIG_CPU_RMAP=y -CONFIG_CPU_SPECTRE=y -CONFIG_CPU_THERMAL=y -CONFIG_CPU_THUMB_CAPABLE=y -CONFIG_CPU_TLB_V7=y -CONFIG_CPU_V7=y -CONFIG_CRC16=y -# CONFIG_CRC32_SARWATE is not set -CONFIG_CRC32_SLICEBY8=y -CONFIG_CRC8=y -CONFIG_CRYPTO_AES_ARM=y -CONFIG_CRYPTO_AES_ARM_BS=y -CONFIG_CRYPTO_BLAKE2S_ARM=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_DEV_QCE=y -# CONFIG_CRYPTO_DEV_QCE_ENABLE_AEAD is not set -# CONFIG_CRYPTO_DEV_QCE_ENABLE_ALL is not set -# CONFIG_CRYPTO_DEV_QCE_ENABLE_SHA is not set -CONFIG_CRYPTO_DEV_QCE_ENABLE_SKCIPHER=y -CONFIG_CRYPTO_DEV_QCE_SKCIPHER=y -CONFIG_CRYPTO_DEV_QCE_SW_MAX_LEN=512 -CONFIG_CRYPTO_DEV_QCOM_RNG=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=y -CONFIG_CRYPTO_LIB_DES=y -CONFIG_CRYPTO_LIB_SHA256=y -CONFIG_CRYPTO_LZO=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA256_ARM=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_SIMD=y -CONFIG_CRYPTO_XTS=y -CONFIG_CRYPTO_ZSTD=y -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_DEBUG_LL_INCLUDE="mach/debug-macro.S" -CONFIG_DEBUG_MISC=y -CONFIG_DMADEVICES=y -CONFIG_DMA_ENGINE=y -CONFIG_DMA_OF=y -CONFIG_DMA_OPS=y -CONFIG_DMA_REMAP=y -CONFIG_DMA_SHARED_BUFFER=y -CONFIG_DMA_VIRTUAL_CHANNELS=y -CONFIG_DTC=y -CONFIG_DT_IDLE_STATES=y -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EEPROM_AT24=y -CONFIG_EXTCON=y -CONFIG_FIXED_PHY=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_FWNODE_MDIO=y -CONFIG_FW_LOADER_PAGED_BUF=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_GENERIC_GETTIMEOFDAY=y -CONFIG_GENERIC_IDLE_POLL_SETUP=y -CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y -CONFIG_GENERIC_IRQ_MULTI_HANDLER=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_IRQ_SHOW_LEVEL=y -CONFIG_GENERIC_LIB_DEVMEM_IS_ALLOWED=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_PHY=y -CONFIG_GENERIC_PINCONF=y -CONFIG_GENERIC_PINCTRL_GROUPS=y -CONFIG_GENERIC_PINMUX_FUNCTIONS=y -CONFIG_GENERIC_SCHED_CLOCK=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_VDSO_32=y -CONFIG_GPIOLIB_IRQCHIP=y -CONFIG_GPIO_74X164=y -CONFIG_GPIO_CDEV=y -CONFIG_GPIO_WATCHDOG=y -CONFIG_GPIO_WATCHDOG_ARCH_INITCALL=y -CONFIG_GRO_CELLS=y -CONFIG_HANDLE_DOMAIN_IRQ=y -CONFIG_HARDEN_BRANCH_PREDICTOR=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_HAS_DMA=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAVE_SMP=y -CONFIG_HIGHMEM=y -# CONFIG_HIGHPTE is not set -CONFIG_HWSPINLOCK=y -CONFIG_HWSPINLOCK_QCOM=y -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_OPTEE=y -CONFIG_HZ_FIXED=0 -CONFIG_I2C=y -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_CHARDEV=y -CONFIG_I2C_HELPER_AUTO=y -# CONFIG_I2C_QCOM_CCI is not set -CONFIG_I2C_QUP=y -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_IOMMU_DEBUGFS is not set -# CONFIG_IOMMU_IO_PGTABLE_ARMV7S is not set -# CONFIG_IOMMU_IO_PGTABLE_LPAE is not set -CONFIG_IOMMU_SUPPORT=y -# CONFIG_IPQ_APSS_PLL is not set -CONFIG_IPQ_GCC_4019=y -# CONFIG_IPQ_GCC_6018 is not set -# CONFIG_IPQ_GCC_806X is not set -# CONFIG_IPQ_GCC_8074 is not set -# CONFIG_IPQ_LCC_806X is not set -CONFIG_IRQCHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_IRQ_FASTEOI_HIERARCHY_HANDLERS=y -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_IRQ_WORK=y -CONFIG_KMAP_LOCAL=y -CONFIG_KMAP_LOCAL_NON_LINEAR_PTE_ARRAY=y -# CONFIG_KPSS_XCC is not set -# CONFIG_KRAITCC is not set -CONFIG_LEDS_LP5523=y -CONFIG_LEDS_LP5562=y -CONFIG_LEDS_LP55XX_COMMON=y -CONFIG_LEDS_TLC591XX=y -CONFIG_LIBFDT=y -CONFIG_LOCK_DEBUGGING_SUPPORT=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_MDIO_BITBANG=y -CONFIG_MDIO_BUS=y -CONFIG_MDIO_DEVICE=y -CONFIG_MDIO_DEVRES=y -CONFIG_MDIO_GPIO=y -CONFIG_MDIO_IPQ4019=y -# CONFIG_MDM_GCC_9615 is not set -# CONFIG_MDM_LCC_9615 is not set -CONFIG_MEMFD_CREATE=y -# CONFIG_MFD_HI6421_SPMI is not set -# CONFIG_MFD_QCOM_RPM is not set -# CONFIG_MFD_SPMI_PMIC is not set -CONFIG_MFD_SYSCON=y -CONFIG_MIGHT_HAVE_CACHE_L2X0=y -CONFIG_MIGRATION=y -CONFIG_MMC=y -CONFIG_MMC_BLOCK=y -CONFIG_MMC_CQHCI=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_IO_ACCESSORS=y -CONFIG_MMC_SDHCI_MSM=y -# CONFIG_MMC_SDHCI_PCI is not set -CONFIG_MMC_SDHCI_PLTFM=y -CONFIG_MODULES_USE_ELF_REL=y -# CONFIG_MSM_GCC_8660 is not set -# CONFIG_MSM_GCC_8916 is not set -# CONFIG_MSM_GCC_8939 is not set -# CONFIG_MSM_GCC_8960 is not set -# CONFIG_MSM_GCC_8974 is not set -# CONFIG_MSM_GCC_8994 is not set -# CONFIG_MSM_GCC_8996 is not set -# CONFIG_MSM_GCC_8998 is not set -# CONFIG_MSM_GPUCC_8998 is not set -# CONFIG_MSM_LCC_8960 is not set -# CONFIG_MSM_MMCC_8960 is not set -# CONFIG_MSM_MMCC_8974 is not set -# CONFIG_MSM_MMCC_8996 is not set -# CONFIG_MSM_MMCC_8998 is not set -CONFIG_MTD_CMDLINE_PARTS=y -CONFIG_MTD_NAND_CORE=y -CONFIG_MTD_NAND_ECC=y -CONFIG_MTD_NAND_ECC_SW_BCH=y -CONFIG_MTD_NAND_ECC_SW_HAMMING=y -CONFIG_MTD_NAND_QCOM=y -# CONFIG_MTD_QCOMSMEM_PARTS is not set -CONFIG_MTD_RAW_NAND=y -CONFIG_MTD_SPI_NAND=y -CONFIG_MTD_SPI_NOR=y -CONFIG_MTD_SPLIT_FIRMWARE=y -CONFIG_MTD_SPLIT_FIT_FW=y -CONFIG_MTD_SPLIT_WRGG_FW=y -CONFIG_MTD_UBI=y -CONFIG_MTD_UBI_BEB_LIMIT=20 -CONFIG_MTD_UBI_BLOCK=y -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEON=y -CONFIG_NET_DEVLINK=y -CONFIG_NET_DSA=y -CONFIG_NET_DSA_QCA8K_IPQ4019=y -CONFIG_NET_DSA_TAG_IPQ4019=y -CONFIG_NET_FLOW_LIMIT=y -CONFIG_NET_PTP_CLASSIFY=y -CONFIG_NET_SELFTESTS=y -CONFIG_NET_SWITCHDEV=y -CONFIG_NLS=y -CONFIG_NO_HZ=y -CONFIG_NO_HZ_COMMON=y -CONFIG_NO_HZ_IDLE=y -CONFIG_NR_CPUS=4 -CONFIG_NVMEM=y -CONFIG_NVMEM_QCOM_QFPROM=y -# CONFIG_NVMEM_QCOM_SEC_QFPROM is not set -# CONFIG_NVMEM_SPMI_SDAM is not set -CONFIG_NVMEM_SYSFS=y -CONFIG_OF=y -CONFIG_OF_ADDRESS=y -CONFIG_OF_EARLY_FLATTREE=y -CONFIG_OF_FLATTREE=y -CONFIG_OF_GPIO=y -CONFIG_OF_IRQ=y -CONFIG_OF_KOBJ=y -CONFIG_OF_MDIO=y -CONFIG_OLD_SIGACTION=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OPTEE=y -CONFIG_OPTEE_SHM_NUM_PRIV_PAGES=1 -CONFIG_PADATA=y -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_PCI=y -CONFIG_PCIEAER=y -CONFIG_PCIEPORTBUS=y -CONFIG_PCIE_DW=y -CONFIG_PCIE_DW_HOST=y -CONFIG_PCIE_QCOM=y -CONFIG_PCI_DISABLE_COMMON_QUIRKS=y -CONFIG_PCI_DOMAINS=y -CONFIG_PCI_DOMAINS_GENERIC=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -CONFIG_PERF_USE_VMALLOC=y -CONFIG_PGTABLE_LEVELS=2 -CONFIG_PHYLIB=y -CONFIG_PHYLINK=y -# CONFIG_PHY_QCOM_APQ8064_SATA is not set -CONFIG_PHY_QCOM_IPQ4019_USB=y -# CONFIG_PHY_QCOM_IPQ806X_SATA is not set -# CONFIG_PHY_QCOM_IPQ806X_USB is not set -# CONFIG_PHY_QCOM_PCIE2 is not set -# CONFIG_PHY_QCOM_QMP is not set -# CONFIG_PHY_QCOM_QUSB2 is not set -# CONFIG_PHY_QCOM_USB_HS_28NM is not set -# CONFIG_PHY_QCOM_USB_SNPS_FEMTO_V2 is not set -# CONFIG_PHY_QCOM_USB_SS is not set -CONFIG_PINCTRL=y -# CONFIG_PINCTRL_APQ8064 is not set -# CONFIG_PINCTRL_APQ8084 is not set -CONFIG_PINCTRL_IPQ4019=y -# CONFIG_PINCTRL_IPQ6018 is not set -# CONFIG_PINCTRL_IPQ8064 is not set -# CONFIG_PINCTRL_IPQ8074 is not set -# CONFIG_PINCTRL_MDM9615 is not set -CONFIG_PINCTRL_MSM=y -# CONFIG_PINCTRL_MSM8226 is not set -# CONFIG_PINCTRL_MSM8660 is not set -# CONFIG_PINCTRL_MSM8916 is not set -# CONFIG_PINCTRL_MSM8960 is not set -# CONFIG_PINCTRL_MSM8976 is not set -# CONFIG_PINCTRL_MSM8994 is not set -# CONFIG_PINCTRL_MSM8996 is not set -# CONFIG_PINCTRL_MSM8998 is not set -# CONFIG_PINCTRL_QCOM_SPMI_PMIC is not set -# CONFIG_PINCTRL_QCOM_SSBI_PMIC is not set -# CONFIG_PINCTRL_QCS404 is not set -# CONFIG_PINCTRL_SC7180 is not set -# CONFIG_PINCTRL_SDM660 is not set -# CONFIG_PINCTRL_SDM845 is not set -# CONFIG_PINCTRL_SM8150 is not set -# CONFIG_PINCTRL_SM8250 is not set -CONFIG_PM_OPP=y -CONFIG_POWER_RESET=y -CONFIG_POWER_RESET_GPIO_RESTART=y -CONFIG_POWER_RESET_MSM=y -CONFIG_POWER_SUPPLY=y -CONFIG_PPS=y -CONFIG_PRINTK_TIME=y -CONFIG_PTP_1588_CLOCK=y -CONFIG_PTP_1588_CLOCK_OPTIONAL=y -CONFIG_QCA807X_PHY=y -CONFIG_QCOM_A53PLL=y -# CONFIG_QCOM_ADM is not set -CONFIG_QCOM_BAM_DMA=y -# CONFIG_QCOM_COMMAND_DB is not set -# CONFIG_QCOM_CPR is not set -# CONFIG_QCOM_EBI2 is not set -# CONFIG_QCOM_GENI_SE is not set -# CONFIG_QCOM_GSBI is not set -# CONFIG_QCOM_HFPLL is not set -# CONFIG_QCOM_IOMMU is not set -CONFIG_QCOM_IPQ4019_ESS_EDMA=y -# CONFIG_QCOM_LLCC is not set -# CONFIG_QCOM_OCMEM is not set -# CONFIG_QCOM_PDC is not set -# CONFIG_QCOM_RMTFS_MEM is not set -# CONFIG_QCOM_RPMH is not set -CONFIG_QCOM_SCM=y -# CONFIG_QCOM_SCM_DOWNLOAD_MODE_DEFAULT is not set -CONFIG_QCOM_SMEM=y -# CONFIG_QCOM_SMSM is not set -# CONFIG_QCOM_SOCINFO is not set -CONFIG_QCOM_TCSR=y -# CONFIG_QCOM_TSENS is not set -CONFIG_QCOM_WDT=y -# CONFIG_QCS_GCC_404 is not set -# CONFIG_QCS_Q6SSTOP_404 is not set -# CONFIG_QCS_TURING_404 is not set -CONFIG_RAS=y -CONFIG_RATIONAL=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=y -CONFIG_REGMAP_MMIO=y -CONFIG_REGULATOR=y -CONFIG_REGULATOR_FIXED_VOLTAGE=y -# CONFIG_REGULATOR_QCOM_LABIBB is not set -# CONFIG_REGULATOR_QCOM_SPMI is not set -# CONFIG_REGULATOR_QCOM_USB_VBUS is not set -CONFIG_REGULATOR_VCTRL=y -CONFIG_REGULATOR_VQMMC_IPQ4019=y -CONFIG_RESET_CONTROLLER=y -# CONFIG_RESET_QCOM_AOSS is not set -# CONFIG_RESET_QCOM_PDC is not set -CONFIG_RFS_ACCEL=y -CONFIG_RPS=y -CONFIG_RTC_CLASS=y -CONFIG_RTC_I2C_AND_SPI=y -CONFIG_RTC_MC146818_LIB=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -# CONFIG_SC_DISPCC_7180 is not set -# CONFIG_SC_GCC_7180 is not set -# CONFIG_SC_GPUCC_7180 is not set -# CONFIG_SC_LPASS_CORECC_7180 is not set -# CONFIG_SC_MSS_7180 is not set -# CONFIG_SC_VIDEOCC_7180 is not set -# CONFIG_SDM_CAMCC_845 is not set -# CONFIG_SDM_DISPCC_845 is not set -# CONFIG_SDM_GCC_660 is not set -# CONFIG_SDM_GCC_845 is not set -# CONFIG_SDM_GPUCC_845 is not set -# CONFIG_SDM_LPASSCC_845 is not set -# CONFIG_SDM_VIDEOCC_845 is not set -CONFIG_SERIAL_8250_FSL=y -CONFIG_SERIAL_MCTRL_GPIO=y -CONFIG_SERIAL_MSM=y -CONFIG_SERIAL_MSM_CONSOLE=y -CONFIG_SGL_ALLOC=y -CONFIG_SMP=y -CONFIG_SMP_ON_UP=y -# CONFIG_SM_GCC_8150 is not set -# CONFIG_SM_GCC_8250 is not set -# CONFIG_SM_GPUCC_8150 is not set -# CONFIG_SM_GPUCC_8250 is not set -# CONFIG_SM_VIDEOCC_8150 is not set -# CONFIG_SM_VIDEOCC_8250 is not set -CONFIG_SOCK_RX_QUEUE_MAPPING=y -CONFIG_SPARSE_IRQ=y -CONFIG_SPI=y -CONFIG_SPI_BITBANG=y -CONFIG_SPI_GPIO=y -CONFIG_SPI_MASTER=y -CONFIG_SPI_MEM=y -CONFIG_SPI_QUP=y -CONFIG_SPMI=y -# CONFIG_SPMI_HISI3670 is not set -CONFIG_SPMI_MSM_PMIC_ARB=y -# CONFIG_SPMI_PMIC_CLKDIV is not set -CONFIG_SRCU=y -CONFIG_SWPHY=y -CONFIG_SWP_EMULATE=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_TEE=y -CONFIG_THERMAL=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_OF=y -CONFIG_TICK_CPU_ACCOUNTING=y -CONFIG_TIMER_OF=y -CONFIG_TIMER_PROBE=y -CONFIG_TREE_RCU=y -CONFIG_TREE_SRCU=y -CONFIG_UBIFS_FS=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_UNCOMPRESS_INCLUDE="debug/uncompress.h" -CONFIG_UNWINDER_ARM=y -CONFIG_USB=y -CONFIG_USB_COMMON=y -CONFIG_USB_SUPPORT=y -CONFIG_USE_OF=y -CONFIG_VFP=y -CONFIG_VFPv3=y -CONFIG_WATCHDOG_CORE=y -CONFIG_XPS=y -CONFIG_XXHASH=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_BCJ=y -CONFIG_ZBOOT_ROM_BSS=0 -CONFIG_ZBOOT_ROM_TEXT=0 -CONFIG_ZLIB_DEFLATE=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZSTD_COMPRESS=y -CONFIG_ZSTD_DECOMPRESS=y diff --git a/target/linux/ipq40xx/files-5.15/drivers/net/dsa/qca/qca8k-ipq4019.c b/target/linux/ipq40xx/files-5.15/drivers/net/dsa/qca/qca8k-ipq4019.c deleted file mode 100644 index 0526445d65..0000000000 --- a/target/linux/ipq40xx/files-5.15/drivers/net/dsa/qca/qca8k-ipq4019.c +++ /dev/null @@ -1,1687 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0 -/* - * Copyright (C) 2009 Felix Fietkau - * Copyright (C) 2011-2012, 2020-2021 Gabor Juhos - * Copyright (c) 2015, 2019, The Linux Foundation. All rights reserved. - * Copyright (c) 2016 John Crispin - * Copyright (c) 2021 Robert Marko - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "qca8k-ipq4019.h" - -#define MIB_DESC(_s, _o, _n) \ - { \ - .size = (_s), \ - .offset = (_o), \ - .name = (_n), \ - } - -static const struct qca8k_mib_desc ar8327_mib[] = { - MIB_DESC(1, 0x00, "RxBroad"), - MIB_DESC(1, 0x04, "RxPause"), - MIB_DESC(1, 0x08, "RxMulti"), - MIB_DESC(1, 0x0c, "RxFcsErr"), - MIB_DESC(1, 0x10, "RxAlignErr"), - MIB_DESC(1, 0x14, "RxRunt"), - MIB_DESC(1, 0x18, "RxFragment"), - MIB_DESC(1, 0x1c, "Rx64Byte"), - MIB_DESC(1, 0x20, "Rx128Byte"), - MIB_DESC(1, 0x24, "Rx256Byte"), - MIB_DESC(1, 0x28, "Rx512Byte"), - MIB_DESC(1, 0x2c, "Rx1024Byte"), - MIB_DESC(1, 0x30, "Rx1518Byte"), - MIB_DESC(1, 0x34, "RxMaxByte"), - MIB_DESC(1, 0x38, "RxTooLong"), - MIB_DESC(2, 0x3c, "RxGoodByte"), - MIB_DESC(2, 0x44, "RxBadByte"), - MIB_DESC(1, 0x4c, "RxOverFlow"), - MIB_DESC(1, 0x50, "Filtered"), - MIB_DESC(1, 0x54, "TxBroad"), - MIB_DESC(1, 0x58, "TxPause"), - MIB_DESC(1, 0x5c, "TxMulti"), - MIB_DESC(1, 0x60, "TxUnderRun"), - MIB_DESC(1, 0x64, "Tx64Byte"), - MIB_DESC(1, 0x68, "Tx128Byte"), - MIB_DESC(1, 0x6c, "Tx256Byte"), - MIB_DESC(1, 0x70, "Tx512Byte"), - MIB_DESC(1, 0x74, "Tx1024Byte"), - MIB_DESC(1, 0x78, "Tx1518Byte"), - MIB_DESC(1, 0x7c, "TxMaxByte"), - MIB_DESC(1, 0x80, "TxOverSize"), - MIB_DESC(2, 0x84, "TxByte"), - MIB_DESC(1, 0x8c, "TxCollision"), - MIB_DESC(1, 0x90, "TxAbortCol"), - MIB_DESC(1, 0x94, "TxMultiCol"), - MIB_DESC(1, 0x98, "TxSingleCol"), - MIB_DESC(1, 0x9c, "TxExcDefer"), - MIB_DESC(1, 0xa0, "TxDefer"), - MIB_DESC(1, 0xa4, "TxLateCol"), - MIB_DESC(1, 0xa8, "RXUnicast"), - MIB_DESC(1, 0xac, "TXunicast"), -}; - -static int -qca8k_read(struct qca8k_priv *priv, u32 reg, u32 *val) -{ - return regmap_read(priv->regmap, reg, val); -} - -static int -qca8k_write(struct qca8k_priv *priv, u32 reg, u32 val) -{ - return regmap_write(priv->regmap, reg, val); -} - -static int -qca8k_rmw(struct qca8k_priv *priv, u32 reg, u32 mask, u32 write_val) -{ - return regmap_update_bits(priv->regmap, reg, mask, write_val); -} - -static int -qca8k_reg_set(struct qca8k_priv *priv, u32 reg, u32 val) -{ - return regmap_set_bits(priv->regmap, reg, val); -} - -static int -qca8k_reg_clear(struct qca8k_priv *priv, u32 reg, u32 val) -{ - return regmap_clear_bits(priv->regmap, reg, val); -} - -static const struct regmap_range qca8k_readable_ranges[] = { - regmap_reg_range(0x0000, 0x00e4), /* Global control */ - regmap_reg_range(0x0100, 0x0168), /* EEE control */ - regmap_reg_range(0x0200, 0x0270), /* Parser control */ - regmap_reg_range(0x0400, 0x0454), /* ACL */ - regmap_reg_range(0x0600, 0x0718), /* Lookup */ - regmap_reg_range(0x0800, 0x0b70), /* QM */ - regmap_reg_range(0x0c00, 0x0c80), /* PKT */ - regmap_reg_range(0x0e00, 0x0e98), /* L3 */ - regmap_reg_range(0x1000, 0x10ac), /* MIB - Port0 */ - regmap_reg_range(0x1100, 0x11ac), /* MIB - Port1 */ - regmap_reg_range(0x1200, 0x12ac), /* MIB - Port2 */ - regmap_reg_range(0x1300, 0x13ac), /* MIB - Port3 */ - regmap_reg_range(0x1400, 0x14ac), /* MIB - Port4 */ - regmap_reg_range(0x1500, 0x15ac), /* MIB - Port5 */ - regmap_reg_range(0x1600, 0x16ac), /* MIB - Port6 */ - -}; - -static const struct regmap_access_table qca8k_readable_table = { - .yes_ranges = qca8k_readable_ranges, - .n_yes_ranges = ARRAY_SIZE(qca8k_readable_ranges), -}; - -static struct regmap_config qca8k_ipq4019_regmap_config = { - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, - .max_register = 0x16ac, /* end MIB - Port6 range */ - .rd_table = &qca8k_readable_table, -}; - -static struct regmap_config qca8k_ipq4019_psgmii_phy_regmap_config = { - .name = "psgmii-phy", - .reg_bits = 32, - .val_bits = 32, - .reg_stride = 4, - .max_register = 0x7fc, -}; - -static int -qca8k_busy_wait(struct qca8k_priv *priv, u32 reg, u32 mask) -{ - u32 val; - - return regmap_read_poll_timeout(priv->regmap, reg, val, - !(val & mask), - 0, - QCA8K_BUSY_WAIT_TIMEOUT); -} - -static int -qca8k_fdb_read(struct qca8k_priv *priv, struct qca8k_fdb *fdb) -{ - u32 reg[4], val; - int i, ret; - - /* load the ARL table into an array */ - for (i = 0; i < 4; i++) { - ret = qca8k_read(priv, QCA8K_REG_ATU_DATA0 + (i * 4), &val); - if (ret < 0) - return ret; - - reg[i] = val; - } - - /* vid - 83:72 */ - fdb->vid = (reg[2] >> QCA8K_ATU_VID_S) & QCA8K_ATU_VID_M; - /* aging - 67:64 */ - fdb->aging = reg[2] & QCA8K_ATU_STATUS_M; - /* portmask - 54:48 */ - fdb->port_mask = (reg[1] >> QCA8K_ATU_PORT_S) & QCA8K_ATU_PORT_M; - /* mac - 47:0 */ - fdb->mac[0] = (reg[1] >> QCA8K_ATU_ADDR0_S) & 0xff; - fdb->mac[1] = reg[1] & 0xff; - fdb->mac[2] = (reg[0] >> QCA8K_ATU_ADDR2_S) & 0xff; - fdb->mac[3] = (reg[0] >> QCA8K_ATU_ADDR3_S) & 0xff; - fdb->mac[4] = (reg[0] >> QCA8K_ATU_ADDR4_S) & 0xff; - fdb->mac[5] = reg[0] & 0xff; - - return 0; -} - -static void -qca8k_fdb_write(struct qca8k_priv *priv, u16 vid, u8 port_mask, const u8 *mac, - u8 aging) -{ - u32 reg[3] = { 0 }; - int i; - - /* vid - 83:72 */ - reg[2] = (vid & QCA8K_ATU_VID_M) << QCA8K_ATU_VID_S; - /* aging - 67:64 */ - reg[2] |= aging & QCA8K_ATU_STATUS_M; - /* portmask - 54:48 */ - reg[1] = (port_mask & QCA8K_ATU_PORT_M) << QCA8K_ATU_PORT_S; - /* mac - 47:0 */ - reg[1] |= mac[0] << QCA8K_ATU_ADDR0_S; - reg[1] |= mac[1]; - reg[0] |= mac[2] << QCA8K_ATU_ADDR2_S; - reg[0] |= mac[3] << QCA8K_ATU_ADDR3_S; - reg[0] |= mac[4] << QCA8K_ATU_ADDR4_S; - reg[0] |= mac[5]; - - /* load the array into the ARL table */ - for (i = 0; i < 3; i++) - qca8k_write(priv, QCA8K_REG_ATU_DATA0 + (i * 4), reg[i]); -} - -static int -qca8k_fdb_access(struct qca8k_priv *priv, enum qca8k_fdb_cmd cmd, int port) -{ - u32 reg; - int ret; - - /* Set the command and FDB index */ - reg = QCA8K_ATU_FUNC_BUSY; - reg |= cmd; - if (port >= 0) { - reg |= QCA8K_ATU_FUNC_PORT_EN; - reg |= (port & QCA8K_ATU_FUNC_PORT_M) << QCA8K_ATU_FUNC_PORT_S; - } - - /* Write the function register triggering the table access */ - ret = qca8k_write(priv, QCA8K_REG_ATU_FUNC, reg); - if (ret) - return ret; - - /* wait for completion */ - ret = qca8k_busy_wait(priv, QCA8K_REG_ATU_FUNC, QCA8K_ATU_FUNC_BUSY); - if (ret) - return ret; - - /* Check for table full violation when adding an entry */ - if (cmd == QCA8K_FDB_LOAD) { - ret = qca8k_read(priv, QCA8K_REG_ATU_FUNC, ®); - if (ret < 0) - return ret; - if (reg & QCA8K_ATU_FUNC_FULL) - return -1; - } - - return 0; -} - -static int -qca8k_fdb_next(struct qca8k_priv *priv, struct qca8k_fdb *fdb, int port) -{ - int ret; - - qca8k_fdb_write(priv, fdb->vid, fdb->port_mask, fdb->mac, fdb->aging); - ret = qca8k_fdb_access(priv, QCA8K_FDB_NEXT, port); - if (ret < 0) - return ret; - - return qca8k_fdb_read(priv, fdb); -} - -static int -qca8k_fdb_add(struct qca8k_priv *priv, const u8 *mac, u16 port_mask, - u16 vid, u8 aging) -{ - int ret; - - mutex_lock(&priv->reg_mutex); - qca8k_fdb_write(priv, vid, port_mask, mac, aging); - ret = qca8k_fdb_access(priv, QCA8K_FDB_LOAD, -1); - mutex_unlock(&priv->reg_mutex); - - return ret; -} - -static int -qca8k_fdb_del(struct qca8k_priv *priv, const u8 *mac, u16 port_mask, u16 vid) -{ - int ret; - - mutex_lock(&priv->reg_mutex); - qca8k_fdb_write(priv, vid, port_mask, mac, 0); - ret = qca8k_fdb_access(priv, QCA8K_FDB_PURGE, -1); - mutex_unlock(&priv->reg_mutex); - - return ret; -} - -static void -qca8k_fdb_flush(struct qca8k_priv *priv) -{ - mutex_lock(&priv->reg_mutex); - qca8k_fdb_access(priv, QCA8K_FDB_FLUSH, -1); - mutex_unlock(&priv->reg_mutex); -} - -static int -qca8k_vlan_access(struct qca8k_priv *priv, enum qca8k_vlan_cmd cmd, u16 vid) -{ - u32 reg; - int ret; - - /* Set the command and VLAN index */ - reg = QCA8K_VTU_FUNC1_BUSY; - reg |= cmd; - reg |= vid << QCA8K_VTU_FUNC1_VID_S; - - /* Write the function register triggering the table access */ - ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC1, reg); - if (ret) - return ret; - - /* wait for completion */ - ret = qca8k_busy_wait(priv, QCA8K_REG_VTU_FUNC1, QCA8K_VTU_FUNC1_BUSY); - if (ret) - return ret; - - /* Check for table full violation when adding an entry */ - if (cmd == QCA8K_VLAN_LOAD) { - ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC1, ®); - if (ret < 0) - return ret; - if (reg & QCA8K_VTU_FUNC1_FULL) - return -ENOMEM; - } - - return 0; -} - -static int -qca8k_vlan_add(struct qca8k_priv *priv, u8 port, u16 vid, bool untagged) -{ - u32 reg; - int ret; - - /* - We do the right thing with VLAN 0 and treat it as untagged while - preserving the tag on egress. - */ - if (vid == 0) - return 0; - - mutex_lock(&priv->reg_mutex); - ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid); - if (ret < 0) - goto out; - - ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, ®); - if (ret < 0) - goto out; - reg |= QCA8K_VTU_FUNC0_VALID | QCA8K_VTU_FUNC0_IVL_EN; - reg &= ~(QCA8K_VTU_FUNC0_EG_MODE_MASK << QCA8K_VTU_FUNC0_EG_MODE_S(port)); - if (untagged) - reg |= QCA8K_VTU_FUNC0_EG_MODE_UNTAG << - QCA8K_VTU_FUNC0_EG_MODE_S(port); - else - reg |= QCA8K_VTU_FUNC0_EG_MODE_TAG << - QCA8K_VTU_FUNC0_EG_MODE_S(port); - - ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg); - if (ret) - goto out; - ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid); - -out: - mutex_unlock(&priv->reg_mutex); - - return ret; -} - -static int -qca8k_vlan_del(struct qca8k_priv *priv, u8 port, u16 vid) -{ - u32 reg, mask; - int ret, i; - bool del; - - mutex_lock(&priv->reg_mutex); - ret = qca8k_vlan_access(priv, QCA8K_VLAN_READ, vid); - if (ret < 0) - goto out; - - ret = qca8k_read(priv, QCA8K_REG_VTU_FUNC0, ®); - if (ret < 0) - goto out; - reg &= ~(3 << QCA8K_VTU_FUNC0_EG_MODE_S(port)); - reg |= QCA8K_VTU_FUNC0_EG_MODE_NOT << - QCA8K_VTU_FUNC0_EG_MODE_S(port); - - /* Check if we're the last member to be removed */ - del = true; - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - mask = QCA8K_VTU_FUNC0_EG_MODE_NOT; - mask <<= QCA8K_VTU_FUNC0_EG_MODE_S(i); - - if ((reg & mask) != mask) { - del = false; - break; - } - } - - if (del) { - ret = qca8k_vlan_access(priv, QCA8K_VLAN_PURGE, vid); - } else { - ret = qca8k_write(priv, QCA8K_REG_VTU_FUNC0, reg); - if (ret) - goto out; - ret = qca8k_vlan_access(priv, QCA8K_VLAN_LOAD, vid); - } - -out: - mutex_unlock(&priv->reg_mutex); - - return ret; -} - -static int -qca8k_mib_init(struct qca8k_priv *priv) -{ - int ret; - - mutex_lock(&priv->reg_mutex); - ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_FLUSH | QCA8K_MIB_BUSY); - if (ret) - goto exit; - - ret = qca8k_busy_wait(priv, QCA8K_REG_MIB, QCA8K_MIB_BUSY); - if (ret) - goto exit; - - ret = qca8k_reg_set(priv, QCA8K_REG_MIB, QCA8K_MIB_CPU_KEEP); - if (ret) - goto exit; - - ret = qca8k_write(priv, QCA8K_REG_MODULE_EN, QCA8K_MODULE_EN_MIB); - -exit: - mutex_unlock(&priv->reg_mutex); - return ret; -} - -static void -qca8k_port_set_status(struct qca8k_priv *priv, int port, int enable) -{ - u32 mask = QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC; - - /* Port 0 is internally connected to the CPU - * TODO: Probably check for RGMII as well if it doesnt work - * in RGMII mode. - */ - if (port > QCA8K_CPU_PORT) - mask |= QCA8K_PORT_STATUS_LINK_AUTO; - - if (enable) - qca8k_reg_set(priv, QCA8K_REG_PORT_STATUS(port), mask); - else - qca8k_reg_clear(priv, QCA8K_REG_PORT_STATUS(port), mask); -} - -static int -qca8k_setup_port(struct dsa_switch *ds, int port) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - int ret; - - /* CPU port gets connected to all user ports of the switch */ - if (dsa_is_cpu_port(ds, port)) { - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT), - QCA8K_PORT_LOOKUP_MEMBER, dsa_user_ports(ds)); - if (ret) - return ret; - - /* Disable CPU ARP Auto-learning by default */ - ret = qca8k_reg_clear(priv, QCA8K_PORT_LOOKUP_CTRL(QCA8K_CPU_PORT), - QCA8K_PORT_LOOKUP_LEARN); - if (ret) - return ret; - } - - /* Individual user ports get connected to CPU port only */ - if (dsa_is_user_port(ds, port)) { - int shift = 16 * (port % 2); - - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_MEMBER, - BIT(QCA8K_CPU_PORT)); - if (ret) - return ret; - - /* Enable ARP Auto-learning by default */ - ret = qca8k_reg_set(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_LEARN); - if (ret) - return ret; - - /* For port based vlans to work we need to set the - * default egress vid - */ - ret = qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port), - 0xfff << shift, - QCA8K_PORT_VID_DEF << shift); - if (ret) - return ret; - - ret = qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port), - QCA8K_PORT_VLAN_CVID(QCA8K_PORT_VID_DEF) | - QCA8K_PORT_VLAN_SVID(QCA8K_PORT_VID_DEF)); - if (ret) - return ret; - } - - return 0; -} - -static int -qca8k_setup(struct dsa_switch *ds) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - int ret, i; - - /* Make sure that port 0 is the cpu port */ - if (!dsa_is_cpu_port(ds, 0)) { - dev_err(priv->dev, "port 0 is not the CPU port"); - return -EINVAL; - } - - /* Enable CPU Port */ - ret = qca8k_reg_set(priv, QCA8K_REG_GLOBAL_FW_CTRL0, - QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN); - if (ret) { - dev_err(priv->dev, "failed enabling CPU port"); - return ret; - } - - /* Enable MIB counters */ - ret = qca8k_mib_init(priv); - if (ret) - dev_warn(priv->dev, "MIB init failed"); - - /* Enable QCA header mode on the cpu port */ - ret = qca8k_write(priv, QCA8K_REG_PORT_HDR_CTRL(QCA8K_CPU_PORT), - QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_TX_S | - QCA8K_PORT_HDR_CTRL_ALL << QCA8K_PORT_HDR_CTRL_RX_S); - if (ret) { - dev_err(priv->dev, "failed enabling QCA header mode"); - return ret; - } - - /* Disable forwarding by default on all ports */ - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(i), - QCA8K_PORT_LOOKUP_MEMBER, 0); - if (ret) - return ret; - } - - /* Disable MAC by default on all ports */ - for (i = 1; i < QCA8K_NUM_PORTS; i++) - qca8k_port_set_status(priv, i, 0); - - /* Forward all unknown frames to CPU port for Linux processing */ - ret = qca8k_write(priv, QCA8K_REG_GLOBAL_FW_CTRL1, - BIT(QCA8K_CPU_PORT) << QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S | - BIT(QCA8K_CPU_PORT) << QCA8K_GLOBAL_FW_CTRL1_BC_DP_S | - BIT(QCA8K_CPU_PORT) << QCA8K_GLOBAL_FW_CTRL1_MC_DP_S | - BIT(QCA8K_CPU_PORT) << QCA8K_GLOBAL_FW_CTRL1_UC_DP_S); - if (ret) - return ret; - - /* Setup connection between CPU port & user ports */ - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - ret = qca8k_setup_port(ds, i); - if (ret) - return ret; - } - - /* Setup our port MTUs to match power on defaults */ - for (i = 0; i < QCA8K_NUM_PORTS; i++) - /* Set per port MTU to 1500 as the MTU change function - * will add the overhead and if its set to 1518 then it - * will apply the overhead again and we will end up with - * MTU of 1536 instead of 1518 - */ - priv->port_mtu[i] = ETH_DATA_LEN; - ret = qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, ETH_FRAME_LEN + ETH_FCS_LEN); - if (ret) - dev_warn(priv->dev, "failed setting MTU settings"); - - /* Flush the FDB table */ - qca8k_fdb_flush(priv); - - /* We don't have interrupts for link changes, so we need to poll */ - ds->pcs_poll = true; - - /* CPU port HW learning doesnt work correctly, so let DSA handle it */ - ds->assisted_learning_on_cpu_port = true; - - return 0; -} - -static int psgmii_vco_calibrate(struct qca8k_priv *priv) -{ - int val, ret; - - if (!priv->psgmii_ethphy) { - dev_err(priv->dev, "PSGMII eth PHY missing, calibration failed!\n"); - return -ENODEV; - } - - /* Fix PSGMII RX 20bit */ - ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5b); - /* Reset PHY PSGMII */ - ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x1b); - /* Release PHY PSGMII reset */ - ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5b); - - /* Poll for VCO PLL calibration finish - Malibu(QCA8075) */ - ret = phy_read_mmd_poll_timeout(priv->psgmii_ethphy, - MDIO_MMD_PMAPMD, - 0x28, val, - (val & BIT(0)), - 10000, 1000000, - false); - if (ret) { - dev_err(priv->dev, "QCA807x PSGMII VCO calibration PLL not ready\n"); - return ret; - } - mdelay(50); - - /* Freeze PSGMII RX CDR */ - ret = phy_write(priv->psgmii_ethphy, MII_RESV2, 0x2230); - - /* Start PSGMIIPHY VCO PLL calibration */ - ret = regmap_set_bits(priv->psgmii, - PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_1, - PSGMIIPHY_REG_PLL_VCO_CALIB_RESTART); - - /* Poll for PSGMIIPHY PLL calibration finish - Dakota(IPQ40xx) */ - ret = regmap_read_poll_timeout(priv->psgmii, - PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_2, - val, val & PSGMIIPHY_REG_PLL_VCO_CALIB_READY, - 10000, 1000000); - if (ret) { - dev_err(priv->dev, "IPQ PSGMIIPHY VCO calibration PLL not ready\n"); - return ret; - } - mdelay(50); - - /* Release PSGMII RX CDR */ - ret = phy_write(priv->psgmii_ethphy, MII_RESV2, 0x3230); - /* Release PSGMII RX 20bit */ - ret = phy_write(priv->psgmii_ethphy, MII_BMCR, 0x5f); - mdelay(200); - - return ret; -} - -static void -qca8k_switch_port_loopback_on_off(struct qca8k_priv *priv, int port, int on) -{ - u32 val = QCA8K_PORT_LOOKUP_LOOPBACK; - - if (on == 0) - val = 0; - - qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_LOOPBACK, val); -} - -static int -qca8k_wait_for_phy_link_state(struct phy_device *phy, int need_status) -{ - int a; - u16 status; - - for (a = 0; a < 100; a++) { - status = phy_read(phy, MII_QCA8075_SSTATUS); - status &= QCA8075_PHY_SPEC_STATUS_LINK; - status = !!status; - if (status == need_status) - return 0; - mdelay(8); - } - - return -1; -} - -static void -qca8k_phy_loopback_on_off(struct qca8k_priv *priv, struct phy_device *phy, - int sw_port, int on) -{ - if (on) { - phy_write(phy, MII_BMCR, BMCR_ANENABLE | BMCR_RESET); - phy_modify(phy, MII_BMCR, BMCR_PDOWN, BMCR_PDOWN); - qca8k_wait_for_phy_link_state(phy, 0); - qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), 0); - phy_write(phy, MII_BMCR, - BMCR_SPEED1000 | - BMCR_FULLDPLX | - BMCR_LOOPBACK); - qca8k_wait_for_phy_link_state(phy, 1); - qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), - QCA8K_PORT_STATUS_SPEED_1000 | - QCA8K_PORT_STATUS_TXMAC | - QCA8K_PORT_STATUS_RXMAC | - QCA8K_PORT_STATUS_DUPLEX); - qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(sw_port), - QCA8K_PORT_LOOKUP_STATE_FORWARD, - QCA8K_PORT_LOOKUP_STATE_FORWARD); - } else { /* off */ - qca8k_write(priv, QCA8K_REG_PORT_STATUS(sw_port), 0); - qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(sw_port), - QCA8K_PORT_LOOKUP_STATE_DISABLED, - QCA8K_PORT_LOOKUP_STATE_DISABLED); - phy_write(phy, MII_BMCR, BMCR_SPEED1000 | BMCR_ANENABLE | BMCR_RESET); - /* turn off the power of the phys - so that unused - ports do not raise links */ - phy_modify(phy, MII_BMCR, BMCR_PDOWN, BMCR_PDOWN); - } -} - -static void -qca8k_phy_pkt_gen_prep(struct qca8k_priv *priv, struct phy_device *phy, - int pkts_num, int on) -{ - if (on) { - /* enable CRC checker and packets counters */ - phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT, 0); - phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT, - QCA8075_MMD7_CNT_FRAME_CHK_EN | QCA8075_MMD7_CNT_SELFCLR); - qca8k_wait_for_phy_link_state(phy, 1); - /* packet number */ - phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_NUMB, pkts_num); - /* pkt size - 1504 bytes + 20 bytes */ - phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_SIZE, 1504); - } else { /* off */ - /* packet number */ - phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_PKT_NUMB, 0); - /* disable CRC checker and packet counter */ - phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_CRC_AND_PKTS_COUNT, 0); - /* disable traffic gen */ - phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL, 0); - } -} - -static void -qca8k_wait_for_phy_pkt_gen_fin(struct qca8k_priv *priv, struct phy_device *phy) -{ - int val; - /* wait for all traffic end: 4096(pkt num)*1524(size)*8ns(125MHz)=49938us */ - phy_read_mmd_poll_timeout(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL, - val, !(val & QCA8075_MMD7_PKT_GEN_INPROGR), - 50000, 1000000, true); -} - -static void -qca8k_start_phy_pkt_gen(struct phy_device *phy) -{ - /* start traffic gen */ - phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_PKT_GEN_CTRL, - QCA8075_MMD7_PKT_GEN_START | QCA8075_MMD7_PKT_GEN_INPROGR); -} - -static int -qca8k_start_all_phys_pkt_gens(struct qca8k_priv *priv) -{ - struct phy_device *phy; - phy = phy_device_create(priv->bus, QCA8075_MDIO_BRDCST_PHY_ADDR, - 0, 0, NULL); - if (!phy) { - dev_err(priv->dev, "unable to create mdio broadcast PHY(0x%x)\n", - QCA8075_MDIO_BRDCST_PHY_ADDR); - return -ENODEV; - } - - qca8k_start_phy_pkt_gen(phy); - - phy_device_free(phy); - return 0; -} - -static int -qca8k_get_phy_pkt_gen_test_result(struct phy_device *phy, int pkts_num) -{ - u32 tx_ok, tx_error; - u32 rx_ok, rx_error; - u32 tx_ok_high16; - u32 rx_ok_high16; - u32 tx_all_ok, rx_all_ok; - - /* check counters */ - tx_ok = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_RECV_CNT_LO); - tx_ok_high16 = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_RECV_CNT_HI); - tx_error = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_EG_FRAME_ERR_CNT); - rx_ok = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_RECV_CNT_LO); - rx_ok_high16 = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_RECV_CNT_HI); - rx_error = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_IG_FRAME_ERR_CNT); - tx_all_ok = tx_ok + (tx_ok_high16 << 16); - rx_all_ok = rx_ok + (rx_ok_high16 << 16); - - if (tx_all_ok < pkts_num) - return -1; - if(rx_all_ok < pkts_num) - return -2; - if(tx_error) - return -3; - if(rx_error) - return -4; - return 0; /* test is ok */ -} - -static -void qca8k_phy_broadcast_write_on_off(struct qca8k_priv *priv, - struct phy_device *phy, int on) -{ - u32 val; - - val = phy_read_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_MDIO_BRDCST_WRITE); - - if (on == 0) - val &= ~QCA8075_MMD7_MDIO_BRDCST_WRITE_EN; - else - val |= QCA8075_MMD7_MDIO_BRDCST_WRITE_EN; - - phy_write_mmd(phy, MDIO_MMD_AN, QCA8075_MMD7_MDIO_BRDCST_WRITE, val); -} - -static int -qca8k_test_dsa_port_for_errors(struct qca8k_priv *priv, struct phy_device *phy, - int port, int test_phase) -{ - int res = 0; - const int test_pkts_num = QCA8075_PKT_GEN_PKTS_COUNT; - - if (test_phase == 1) { /* start test preps */ - qca8k_phy_loopback_on_off(priv, phy, port, 1); - qca8k_switch_port_loopback_on_off(priv, port, 1); - qca8k_phy_broadcast_write_on_off(priv, phy, 1); - qca8k_phy_pkt_gen_prep(priv, phy, test_pkts_num, 1); - } else if (test_phase == 2) { - /* wait for test results, collect it and cleanup */ - qca8k_wait_for_phy_pkt_gen_fin(priv, phy); - res = qca8k_get_phy_pkt_gen_test_result(phy, test_pkts_num); - qca8k_phy_pkt_gen_prep(priv, phy, test_pkts_num, 0); - qca8k_phy_broadcast_write_on_off(priv, phy, 0); - qca8k_switch_port_loopback_on_off(priv, port, 0); - qca8k_phy_loopback_on_off(priv, phy, port, 0); - } - - return res; -} - -static int -qca8k_do_dsa_sw_ports_self_test(struct qca8k_priv *priv, int parallel_test) -{ - struct device_node *dn = priv->dev->of_node; - struct device_node *ports, *port; - struct device_node *phy_dn; - struct phy_device *phy; - int reg, err = 0, test_phase; - u32 tests_result = 0; - - ports = of_get_child_by_name(dn, "ports"); - if (!ports) { - dev_err(priv->dev, "no ports child node found\n"); - return -EINVAL; - } - - for (test_phase = 1; test_phase <= 2; test_phase++) { - if (parallel_test && test_phase == 2) { - err = qca8k_start_all_phys_pkt_gens(priv); - if (err) - goto error; - } - for_each_available_child_of_node(ports, port) { - err = of_property_read_u32(port, "reg", ®); - if (err) - goto error; - if (reg >= QCA8K_NUM_PORTS) { - err = -EINVAL; - goto error; - } - phy_dn = of_parse_phandle(port, "phy-handle", 0); - if (phy_dn) { - phy = of_phy_find_device(phy_dn); - of_node_put(phy_dn); - if (phy) { - int result; - result = qca8k_test_dsa_port_for_errors(priv, - phy, reg, test_phase); - if (!parallel_test && test_phase == 1) - qca8k_start_phy_pkt_gen(phy); - put_device(&phy->mdio.dev); - if (test_phase == 2) { - tests_result <<= 1; - if (result) - tests_result |= 1; - } - } - } - } - } - -end: - of_node_put(ports); - qca8k_fdb_flush(priv); - return tests_result; -error: - tests_result |= 0xf000; - goto end; -} - -static int -psgmii_vco_calibrate_and_test(struct dsa_switch *ds) -{ - int ret, a, test_result; - struct qca8k_priv *priv = ds->priv; - - for (a = 0; a <= QCA8K_PSGMII_CALB_NUM; a++) { - ret = psgmii_vco_calibrate(priv); - if (ret) - return ret; - /* first we run serial test */ - test_result = qca8k_do_dsa_sw_ports_self_test(priv, 0); - /* and if it is ok then we run the test in parallel */ - if (!test_result) - test_result = qca8k_do_dsa_sw_ports_self_test(priv, 1); - if (!test_result) { - if (a > 0) { - dev_warn(priv->dev, "PSGMII work was stabilized after %d " - "calibration retries !\n", a); - } - return 0; - } else { - schedule(); - if (a > 0 && a % 10 == 0) { - dev_err(priv->dev, "PSGMII work is unstable !!! " - "Let's try to wait a bit ... %d\n", a); - set_current_state(TASK_INTERRUPTIBLE); - schedule_timeout(msecs_to_jiffies(a * 100)); - } - } - } - - panic("PSGMII work is unstable !!! " - "Repeated recalibration attempts did not help(0x%x) !\n", - test_result); - - return -EFAULT; -} - -static int -ipq4019_psgmii_configure(struct dsa_switch *ds) -{ - struct qca8k_priv *priv = ds->priv; - int ret; - - if (!priv->psgmii_calibrated) { - ret = psgmii_vco_calibrate_and_test(ds); - - ret = regmap_clear_bits(priv->psgmii, PSGMIIPHY_MODE_CONTROL, - PSGMIIPHY_MODE_ATHR_CSCO_MODE_25M); - ret = regmap_write(priv->psgmii, PSGMIIPHY_TX_CONTROL, - PSGMIIPHY_TX_CONTROL_MAGIC_VALUE); - - priv->psgmii_calibrated = true; - - return ret; - } - - return 0; -} - -static void -qca8k_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, - const struct phylink_link_state *state) -{ - struct qca8k_priv *priv = ds->priv; - - switch (port) { - case 0: - /* CPU port, no configuration needed */ - return; - case 1: - case 2: - case 3: - if (state->interface == PHY_INTERFACE_MODE_PSGMII) - if (ipq4019_psgmii_configure(ds)) - dev_err(ds->dev, "PSGMII configuration failed!\n"); - return; - case 4: - case 5: - if (state->interface == PHY_INTERFACE_MODE_RGMII || - state->interface == PHY_INTERFACE_MODE_RGMII_ID || - state->interface == PHY_INTERFACE_MODE_RGMII_RXID || - state->interface == PHY_INTERFACE_MODE_RGMII_TXID) { - qca8k_reg_set(priv, QCA8K_REG_RGMII_CTRL, QCA8K_RGMII_CTRL_CLK); - } - - if (state->interface == PHY_INTERFACE_MODE_PSGMII) - if (ipq4019_psgmii_configure(ds)) - dev_err(ds->dev, "PSGMII configuration failed!\n"); - return; - default: - dev_err(ds->dev, "%s: unsupported port: %i\n", __func__, port); - return; - } -} - -static void -qca8k_phylink_validate(struct dsa_switch *ds, int port, - unsigned long *supported, - struct phylink_link_state *state) -{ - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - - switch (port) { - case 0: /* CPU port */ - if (state->interface != PHY_INTERFACE_MODE_INTERNAL) - goto unsupported; - break; - case 1: - case 2: - case 3: - /* Only PSGMII mode is supported */ - if (state->interface != PHY_INTERFACE_MODE_PSGMII) - goto unsupported; - break; - case 4: - case 5: - /* PSGMII and RGMII modes are supported */ - if (state->interface != PHY_INTERFACE_MODE_PSGMII && - state->interface != PHY_INTERFACE_MODE_RGMII && - state->interface != PHY_INTERFACE_MODE_RGMII_ID && - state->interface != PHY_INTERFACE_MODE_RGMII_RXID && - state->interface != PHY_INTERFACE_MODE_RGMII_TXID) - goto unsupported; - break; - default: -unsupported: - dev_warn(ds->dev, "interface '%s' (%d) on port %d is not supported\n", - phy_modes(state->interface), state->interface, port); - linkmode_zero(supported); - return; - } - - if (port == 0) { - phylink_set_port_modes(mask); - - phylink_set(mask, 1000baseT_Full); - - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); - } else { - /* Simply copy what PHYs tell us */ - linkmode_copy(state->advertising, supported); - } -} - -static int -qca8k_phylink_mac_link_state(struct dsa_switch *ds, int port, - struct phylink_link_state *state) -{ - struct qca8k_priv *priv = ds->priv; - u32 reg; - int ret; - - ret = qca8k_read(priv, QCA8K_REG_PORT_STATUS(port), ®); - if (ret < 0) - return ret; - - state->link = !!(reg & QCA8K_PORT_STATUS_LINK_UP); - state->an_complete = state->link; - state->an_enabled = !!(reg & QCA8K_PORT_STATUS_LINK_AUTO); - state->duplex = (reg & QCA8K_PORT_STATUS_DUPLEX) ? DUPLEX_FULL : - DUPLEX_HALF; - - switch (reg & QCA8K_PORT_STATUS_SPEED) { - case QCA8K_PORT_STATUS_SPEED_10: - state->speed = SPEED_10; - break; - case QCA8K_PORT_STATUS_SPEED_100: - state->speed = SPEED_100; - break; - case QCA8K_PORT_STATUS_SPEED_1000: - state->speed = SPEED_1000; - break; - default: - state->speed = SPEED_UNKNOWN; - break; - } - - state->pause = MLO_PAUSE_NONE; - if (reg & QCA8K_PORT_STATUS_RXFLOW) - state->pause |= MLO_PAUSE_RX; - if (reg & QCA8K_PORT_STATUS_TXFLOW) - state->pause |= MLO_PAUSE_TX; - - return 1; -} - -static void -qca8k_phylink_mac_link_down(struct dsa_switch *ds, int port, unsigned int mode, - phy_interface_t interface) -{ - struct qca8k_priv *priv = ds->priv; - - qca8k_port_set_status(priv, port, 0); -} - -static void -qca8k_phylink_mac_link_up(struct dsa_switch *ds, int port, unsigned int mode, - phy_interface_t interface, struct phy_device *phydev, - int speed, int duplex, bool tx_pause, bool rx_pause) -{ - struct qca8k_priv *priv = ds->priv; - u32 reg; - - if (phylink_autoneg_inband(mode)) { - reg = QCA8K_PORT_STATUS_LINK_AUTO; - } else { - switch (speed) { - case SPEED_10: - reg = QCA8K_PORT_STATUS_SPEED_10; - break; - case SPEED_100: - reg = QCA8K_PORT_STATUS_SPEED_100; - break; - case SPEED_1000: - reg = QCA8K_PORT_STATUS_SPEED_1000; - break; - default: - reg = QCA8K_PORT_STATUS_LINK_AUTO; - break; - } - - if (duplex == DUPLEX_FULL) - reg |= QCA8K_PORT_STATUS_DUPLEX; - - if (rx_pause || dsa_is_cpu_port(ds, port)) - reg |= QCA8K_PORT_STATUS_RXFLOW; - - if (tx_pause || dsa_is_cpu_port(ds, port)) - reg |= QCA8K_PORT_STATUS_TXFLOW; - } - - reg |= QCA8K_PORT_STATUS_TXMAC | QCA8K_PORT_STATUS_RXMAC; - - qca8k_write(priv, QCA8K_REG_PORT_STATUS(port), reg); -} - -static void -qca8k_get_strings(struct dsa_switch *ds, int port, u32 stringset, uint8_t *data) -{ - int i; - - if (stringset != ETH_SS_STATS) - return; - - for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) - strncpy(data + i * ETH_GSTRING_LEN, ar8327_mib[i].name, - ETH_GSTRING_LEN); -} - -static void -qca8k_get_ethtool_stats(struct dsa_switch *ds, int port, - uint64_t *data) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - const struct qca8k_mib_desc *mib; - u32 reg, i, val; - u32 hi = 0; - int ret; - - for (i = 0; i < ARRAY_SIZE(ar8327_mib); i++) { - mib = &ar8327_mib[i]; - reg = QCA8K_PORT_MIB_COUNTER(port) + mib->offset; - - ret = qca8k_read(priv, reg, &val); - if (ret < 0) - continue; - - if (mib->size == 2) { - ret = qca8k_read(priv, reg + 4, &hi); - if (ret < 0) - continue; - } - - data[i] = val; - if (mib->size == 2) - data[i] |= (u64)hi << 32; - } -} - -static int -qca8k_get_sset_count(struct dsa_switch *ds, int port, int sset) -{ - if (sset != ETH_SS_STATS) - return 0; - - return ARRAY_SIZE(ar8327_mib); -} - -static int -qca8k_set_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *eee) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - u32 lpi_en = QCA8K_REG_EEE_CTRL_LPI_EN(port); - u32 reg; - int ret; - - mutex_lock(&priv->reg_mutex); - ret = qca8k_read(priv, QCA8K_REG_EEE_CTRL, ®); - if (ret < 0) - goto exit; - - if (eee->eee_enabled) - reg |= lpi_en; - else - reg &= ~lpi_en; - ret = qca8k_write(priv, QCA8K_REG_EEE_CTRL, reg); - -exit: - mutex_unlock(&priv->reg_mutex); - return ret; -} - -static int -qca8k_get_mac_eee(struct dsa_switch *ds, int port, struct ethtool_eee *e) -{ - /* Nothing to do on the port's MAC */ - return 0; -} - -static void -qca8k_port_stp_state_set(struct dsa_switch *ds, int port, u8 state) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - u32 stp_state; - - switch (state) { - case BR_STATE_DISABLED: - stp_state = QCA8K_PORT_LOOKUP_STATE_DISABLED; - break; - case BR_STATE_BLOCKING: - stp_state = QCA8K_PORT_LOOKUP_STATE_BLOCKING; - break; - case BR_STATE_LISTENING: - stp_state = QCA8K_PORT_LOOKUP_STATE_LISTENING; - break; - case BR_STATE_LEARNING: - stp_state = QCA8K_PORT_LOOKUP_STATE_LEARNING; - break; - case BR_STATE_FORWARDING: - default: - stp_state = QCA8K_PORT_LOOKUP_STATE_FORWARD; - break; - } - - qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_STATE_MASK, stp_state); -} - -static int -qca8k_port_bridge_join(struct dsa_switch *ds, int port, struct net_device *br) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - int port_mask, cpu_port; - int i, ret; - - cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - port_mask = BIT(cpu_port); - - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - if (dsa_is_cpu_port(ds, i)) - continue; - if (dsa_to_port(ds, i)->bridge_dev != br) - continue; - /* Add this port to the portvlan mask of the other ports - * in the bridge - */ - ret = qca8k_reg_set(priv, - QCA8K_PORT_LOOKUP_CTRL(i), - BIT(port)); - if (ret) - return ret; - if (i != port) - port_mask |= BIT(i); - } - - /* Add all other ports to this ports portvlan mask */ - ret = qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_MEMBER, port_mask); - - return ret; -} - -static void -qca8k_port_bridge_leave(struct dsa_switch *ds, int port, struct net_device *br) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - int cpu_port, i; - - cpu_port = dsa_to_port(ds, port)->cpu_dp->index; - - for (i = 0; i < QCA8K_NUM_PORTS; i++) { - if (dsa_is_cpu_port(ds, i)) - continue; - if (dsa_to_port(ds, i)->bridge_dev != br) - continue; - /* Remove this port to the portvlan mask of the other ports - * in the bridge - */ - qca8k_reg_clear(priv, - QCA8K_PORT_LOOKUP_CTRL(i), - BIT(port)); - } - - /* Set the cpu port to be the only one in the portvlan mask of - * this port - */ - qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_MEMBER, BIT(cpu_port)); -} - -void qca8k_port_fast_age(struct dsa_switch *ds, int port) -{ - struct qca8k_priv *priv = ds->priv; - - mutex_lock(&priv->reg_mutex); - qca8k_fdb_access(priv, QCA8K_FDB_FLUSH_PORT, port); - mutex_unlock(&priv->reg_mutex); -} - -int qca8k_set_ageing_time(struct dsa_switch *ds, unsigned int msecs) -{ - struct qca8k_priv *priv = ds->priv; - unsigned int secs = msecs / 1000; - u32 val; - - /* AGE_TIME reg is set in 7s step */ - val = secs / 7; - - /* Handle case with 0 as val to NOT disable - * learning - */ - if (!val) - val = 1; - - return qca8k_rmw(priv, QCA8K_REG_ATU_CTRL, - QCA8K_ATU_AGE_TIME_MASK, - QCA8K_ATU_AGE_TIME(val)); -} - -static int -qca8k_port_enable(struct dsa_switch *ds, int port, - struct phy_device *phy) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - - qca8k_port_set_status(priv, port, 1); - priv->port_sts[port].enabled = 1; - - if (dsa_is_user_port(ds, port)) - phy_support_asym_pause(phy); - - return 0; -} - -static void -qca8k_port_disable(struct dsa_switch *ds, int port) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - - qca8k_port_set_status(priv, port, 0); - priv->port_sts[port].enabled = 0; -} - -static int -qca8k_port_change_mtu(struct dsa_switch *ds, int port, int new_mtu) -{ - struct qca8k_priv *priv = ds->priv; - int i, mtu = 0; - - priv->port_mtu[port] = new_mtu; - - for (i = 0; i < QCA8K_NUM_PORTS; i++) - if (priv->port_mtu[i] > mtu) - mtu = priv->port_mtu[i]; - - /* Include L2 header / FCS length */ - return qca8k_write(priv, QCA8K_MAX_FRAME_SIZE, mtu + ETH_HLEN + ETH_FCS_LEN); -} - -static int -qca8k_port_max_mtu(struct dsa_switch *ds, int port) -{ - return QCA8K_MAX_MTU; -} - -static int -qca8k_port_fdb_insert(struct qca8k_priv *priv, const u8 *addr, - u16 port_mask, u16 vid) -{ - /* Set the vid to the port vlan id if no vid is set */ - if (!vid) - vid = QCA8K_PORT_VID_DEF; - - return qca8k_fdb_add(priv, addr, port_mask, vid, - QCA8K_ATU_STATUS_STATIC); -} - -static int -qca8k_port_fdb_add(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - u16 port_mask = BIT(port); - - return qca8k_port_fdb_insert(priv, addr, port_mask, vid); -} - -static int -qca8k_port_fdb_del(struct dsa_switch *ds, int port, - const unsigned char *addr, u16 vid) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - u16 port_mask = BIT(port); - - if (!vid) - vid = QCA8K_PORT_VID_DEF; - - return qca8k_fdb_del(priv, addr, port_mask, vid); -} - -static int -qca8k_port_fdb_dump(struct dsa_switch *ds, int port, - dsa_fdb_dump_cb_t *cb, void *data) -{ - struct qca8k_priv *priv = (struct qca8k_priv *)ds->priv; - struct qca8k_fdb _fdb = { 0 }; - int cnt = QCA8K_NUM_FDB_RECORDS; - bool is_static; - int ret = 0; - - mutex_lock(&priv->reg_mutex); - while (cnt-- && !qca8k_fdb_next(priv, &_fdb, port)) { - if (!_fdb.aging) - break; - is_static = (_fdb.aging == QCA8K_ATU_STATUS_STATIC); - ret = cb(_fdb.mac, _fdb.vid, is_static, data); - if (ret) - break; - } - mutex_unlock(&priv->reg_mutex); - - return 0; -} - -static int -qca8k_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, - struct netlink_ext_ack *extack) -{ - struct qca8k_priv *priv = ds->priv; - - if (vlan_filtering) { - qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_VLAN_MODE, - QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE); - } else { - qca8k_rmw(priv, QCA8K_PORT_LOOKUP_CTRL(port), - QCA8K_PORT_LOOKUP_VLAN_MODE, - QCA8K_PORT_LOOKUP_VLAN_MODE_NONE); - } - - return 0; -} - -static int -qca8k_port_vlan_add(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan, - struct netlink_ext_ack *extack) -{ - bool untagged = vlan->flags & BRIDGE_VLAN_INFO_UNTAGGED; - bool pvid = vlan->flags & BRIDGE_VLAN_INFO_PVID; - struct qca8k_priv *priv = ds->priv; - int ret = 0; - - ret = qca8k_vlan_add(priv, port, vlan->vid, untagged); - if (ret) { - dev_err(priv->dev, "Failed to add VLAN to port %d (%d)", port, ret); - return ret; - } - - if (pvid) { - int shift = 16 * (port % 2); - - qca8k_rmw(priv, QCA8K_EGRESS_VLAN(port), - 0xfff << shift, vlan->vid << shift); - qca8k_write(priv, QCA8K_REG_PORT_VLAN_CTRL0(port), - QCA8K_PORT_VLAN_CVID(vlan->vid) | - QCA8K_PORT_VLAN_SVID(vlan->vid)); - } - return 0; -} - -static int -qca8k_port_vlan_del(struct dsa_switch *ds, int port, - const struct switchdev_obj_port_vlan *vlan) -{ - struct qca8k_priv *priv = ds->priv; - int ret = 0; - - ret = qca8k_vlan_del(priv, port, vlan->vid); - if (ret) - dev_err(priv->dev, "Failed to delete VLAN from port %d (%d)", port, ret); - - return ret; -} - -static enum dsa_tag_protocol -qca8k_get_tag_protocol(struct dsa_switch *ds, int port, - enum dsa_tag_protocol mp) -{ - return DSA_TAG_PROTO_IPQ4019; -} - -static const struct dsa_switch_ops qca8k_switch_ops = { - .get_tag_protocol = qca8k_get_tag_protocol, - .setup = qca8k_setup, - .get_strings = qca8k_get_strings, - .get_ethtool_stats = qca8k_get_ethtool_stats, - .get_sset_count = qca8k_get_sset_count, - .set_ageing_time = qca8k_set_ageing_time, - .get_mac_eee = qca8k_get_mac_eee, - .set_mac_eee = qca8k_set_mac_eee, - .port_enable = qca8k_port_enable, - .port_disable = qca8k_port_disable, - .port_change_mtu = qca8k_port_change_mtu, - .port_max_mtu = qca8k_port_max_mtu, - .port_stp_state_set = qca8k_port_stp_state_set, - .port_bridge_join = qca8k_port_bridge_join, - .port_bridge_leave = qca8k_port_bridge_leave, - .port_fast_age = qca8k_port_fast_age, - .port_fdb_add = qca8k_port_fdb_add, - .port_fdb_del = qca8k_port_fdb_del, - .port_fdb_dump = qca8k_port_fdb_dump, - .port_vlan_filtering = qca8k_port_vlan_filtering, - .port_vlan_add = qca8k_port_vlan_add, - .port_vlan_del = qca8k_port_vlan_del, - .phylink_validate = qca8k_phylink_validate, - .phylink_mac_link_state = qca8k_phylink_mac_link_state, - .phylink_mac_config = qca8k_phylink_mac_config, - .phylink_mac_link_down = qca8k_phylink_mac_link_down, - .phylink_mac_link_up = qca8k_phylink_mac_link_up, -}; - -static int -qca8k_ipq4019_probe(struct platform_device *pdev) -{ - struct qca8k_priv *priv; - void __iomem *base, *psgmii; - struct device_node *np = pdev->dev.of_node, *mdio_np, *psgmii_ethphy_np; - int ret; - - priv = devm_kzalloc(&pdev->dev, sizeof(*priv), GFP_KERNEL); - if (!priv) - return -ENOMEM; - - priv->dev = &pdev->dev; - - base = devm_platform_ioremap_resource_byname(pdev, "base"); - if (IS_ERR(base)) - return PTR_ERR(base); - - priv->regmap = devm_regmap_init_mmio(priv->dev, base, - &qca8k_ipq4019_regmap_config); - if (IS_ERR(priv->regmap)) { - ret = PTR_ERR(priv->regmap); - dev_err(priv->dev, "base regmap initialization failed, %d\n", ret); - return ret; - } - - psgmii = devm_platform_ioremap_resource_byname(pdev, "psgmii_phy"); - if (IS_ERR(psgmii)) - return PTR_ERR(psgmii); - - priv->psgmii = devm_regmap_init_mmio(priv->dev, psgmii, - &qca8k_ipq4019_psgmii_phy_regmap_config); - if (IS_ERR(priv->psgmii)) { - ret = PTR_ERR(priv->psgmii); - dev_err(priv->dev, "PSGMII regmap initialization failed, %d\n", ret); - return ret; - } - - mdio_np = of_parse_phandle(np, "mdio", 0); - if (!mdio_np) { - dev_err(&pdev->dev, "unable to get MDIO bus phandle\n"); - of_node_put(mdio_np); - return -EINVAL; - } - - priv->bus = of_mdio_find_bus(mdio_np); - of_node_put(mdio_np); - if (!priv->bus) { - dev_err(&pdev->dev, "unable to find MDIO bus\n"); - return -EPROBE_DEFER; - } - - psgmii_ethphy_np = of_parse_phandle(np, "psgmii-ethphy", 0); - if (!psgmii_ethphy_np) { - dev_dbg(&pdev->dev, "unable to get PSGMII eth PHY phandle\n"); - of_node_put(psgmii_ethphy_np); - } - - if (psgmii_ethphy_np) { - priv->psgmii_ethphy = of_phy_find_device(psgmii_ethphy_np); - of_node_put(psgmii_ethphy_np); - if (!priv->psgmii_ethphy) { - dev_err(&pdev->dev, "unable to get PSGMII eth PHY\n"); - return -ENODEV; - } - } - - priv->ds = devm_kzalloc(priv->dev, sizeof(*priv->ds), GFP_KERNEL); - if (!priv->ds) - return -ENOMEM; - - priv->ds->dev = priv->dev; - priv->ds->num_ports = QCA8K_NUM_PORTS; - priv->ds->priv = priv; - priv->ops = qca8k_switch_ops; - priv->ds->ops = &priv->ops; - - mutex_init(&priv->reg_mutex); - platform_set_drvdata(pdev, priv); - - return dsa_register_switch(priv->ds); -} - -static int -qca8k_ipq4019_remove(struct platform_device *pdev) -{ - struct qca8k_priv *priv = dev_get_drvdata(&pdev->dev); - int i; - - if (!priv) - return 0; - - for (i = 0; i < QCA8K_NUM_PORTS; i++) - qca8k_port_set_status(priv, i, 0); - - dsa_unregister_switch(priv->ds); - - dev_set_drvdata(&pdev->dev, NULL); - - return 0; -} - -static const struct of_device_id qca8k_ipq4019_of_match[] = { - { .compatible = "qca,ipq4019-qca8337n" }, - { /* sentinel */ }, -}; - -static struct platform_driver qca8k_ipq4019_driver = { - .probe = qca8k_ipq4019_probe, - .remove = qca8k_ipq4019_remove, - .driver = { - .name = "qca8k-ipq4019", - .of_match_table = qca8k_ipq4019_of_match, - }, -}; - -module_platform_driver(qca8k_ipq4019_driver); - -MODULE_AUTHOR("Mathieu Olivari, John Crispin "); -MODULE_AUTHOR("Gabor Juhos , Robert Marko "); -MODULE_DESCRIPTION("Qualcomm IPQ4019 built-in switch driver"); -MODULE_LICENSE("GPL v2"); diff --git a/target/linux/ipq40xx/files-5.15/drivers/net/dsa/qca/qca8k-ipq4019.h b/target/linux/ipq40xx/files-5.15/drivers/net/dsa/qca/qca8k-ipq4019.h deleted file mode 100644 index 1e1f45a443..0000000000 --- a/target/linux/ipq40xx/files-5.15/drivers/net/dsa/qca/qca8k-ipq4019.h +++ /dev/null @@ -1,293 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0-only */ -/* - * Copyright (C) 2009 Felix Fietkau - * Copyright (C) 2011-2012 Gabor Juhos - * Copyright (c) 2015, The Linux Foundation. All rights reserved. - */ - -#ifndef __QCA8K_H -#define __QCA8K_H - -#include - -#define QCA8K_NUM_PORTS 6 -#define QCA8K_CPU_PORT 0 -#define QCA8K_MAX_MTU 9000 - -#define QCA8K_BUSY_WAIT_TIMEOUT 2000 - -#define QCA8K_NUM_FDB_RECORDS 2048 - -#define QCA8K_PORT_VID_DEF 1 - -/* Global control registers */ -#define QCA8K_REG_MASK_CTRL 0x000 -#define QCA8K_MASK_CTRL_REV_ID_MASK GENMASK(7, 0) -#define QCA8K_MASK_CTRL_REV_ID(x) ((x) >> 0) -#define QCA8K_MASK_CTRL_DEVICE_ID_MASK GENMASK(15, 8) -#define QCA8K_MASK_CTRL_DEVICE_ID(x) ((x) >> 8) -#define QCA8K_REG_RGMII_CTRL 0x004 -#define QCA8K_RGMII_CTRL_RGMII_RXC GENMASK(1, 0) -#define QCA8K_RGMII_CTRL_RGMII_TXC GENMASK(9, 8) -/* Some kind of CLK selection - * 0: gcc_ess_dly2ns - * 1: gcc_ess_clk - */ -#define QCA8K_RGMII_CTRL_CLK BIT(10) -#define QCA8K_RGMII_CTRL_DELAY_RMII0 GENMASK(17, 16) -#define QCA8K_RGMII_CTRL_INVERT_RMII0_REF_CLK BIT(18) -#define QCA8K_RGMII_CTRL_DELAY_RMII1 GENMASK(20, 19) -#define QCA8K_RGMII_CTRL_INVERT_RMII1_REF_CLK BIT(21) -#define QCA8K_RGMII_CTRL_INVERT_RMII0_MASTER_EN BIT(24) -#define QCA8K_RGMII_CTRL_INVERT_RMII1_MASTER_EN BIT(25) -#define QCA8K_REG_MODULE_EN 0x030 -#define QCA8K_MODULE_EN_MIB BIT(0) -#define QCA8K_REG_MIB 0x034 -#define QCA8K_MIB_FLUSH BIT(24) -#define QCA8K_MIB_CPU_KEEP BIT(20) -#define QCA8K_MIB_BUSY BIT(17) -#define QCA8K_GOL_MAC_ADDR0 0x60 -#define QCA8K_GOL_MAC_ADDR1 0x64 -#define QCA8K_MAX_FRAME_SIZE 0x78 -#define QCA8K_REG_PORT_STATUS(_i) (0x07c + (_i) * 4) -#define QCA8K_PORT_STATUS_SPEED GENMASK(1, 0) -#define QCA8K_PORT_STATUS_SPEED_10 0 -#define QCA8K_PORT_STATUS_SPEED_100 0x1 -#define QCA8K_PORT_STATUS_SPEED_1000 0x2 -#define QCA8K_PORT_STATUS_TXMAC BIT(2) -#define QCA8K_PORT_STATUS_RXMAC BIT(3) -#define QCA8K_PORT_STATUS_TXFLOW BIT(4) -#define QCA8K_PORT_STATUS_RXFLOW BIT(5) -#define QCA8K_PORT_STATUS_DUPLEX BIT(6) -#define QCA8K_PORT_STATUS_LINK_UP BIT(8) -#define QCA8K_PORT_STATUS_LINK_AUTO BIT(9) -#define QCA8K_PORT_STATUS_LINK_PAUSE BIT(10) -#define QCA8K_PORT_STATUS_FLOW_AUTO BIT(12) -#define QCA8K_REG_PORT_HDR_CTRL(_i) (0x9c + (_i * 4)) -#define QCA8K_PORT_HDR_CTRL_RX_MASK GENMASK(3, 2) -#define QCA8K_PORT_HDR_CTRL_RX_S 2 -#define QCA8K_PORT_HDR_CTRL_TX_MASK GENMASK(1, 0) -#define QCA8K_PORT_HDR_CTRL_TX_S 0 -#define QCA8K_PORT_HDR_CTRL_ALL 2 -#define QCA8K_PORT_HDR_CTRL_MGMT 1 -#define QCA8K_PORT_HDR_CTRL_NONE 0 -#define QCA8K_REG_SGMII_CTRL 0x0e0 -#define QCA8K_SGMII_EN_PLL BIT(1) -#define QCA8K_SGMII_EN_RX BIT(2) -#define QCA8K_SGMII_EN_TX BIT(3) -#define QCA8K_SGMII_EN_SD BIT(4) -#define QCA8K_SGMII_CLK125M_DELAY BIT(7) -#define QCA8K_SGMII_MODE_CTRL_MASK (BIT(22) | BIT(23)) -#define QCA8K_SGMII_MODE_CTRL_BASEX (0 << 22) -#define QCA8K_SGMII_MODE_CTRL_PHY (1 << 22) -#define QCA8K_SGMII_MODE_CTRL_MAC (2 << 22) - -/* EEE control registers */ -#define QCA8K_REG_EEE_CTRL 0x100 -#define QCA8K_REG_EEE_CTRL_LPI_EN(_i) ((_i + 1) * 2) - -/* ACL registers */ -#define QCA8K_REG_PORT_VLAN_CTRL0(_i) (0x420 + (_i * 8)) -#define QCA8K_PORT_VLAN_CVID(x) (x << 16) -#define QCA8K_PORT_VLAN_SVID(x) x -#define QCA8K_REG_PORT_VLAN_CTRL1(_i) (0x424 + (_i * 8)) -#define QCA8K_REG_IPV4_PRI_BASE_ADDR 0x470 -#define QCA8K_REG_IPV4_PRI_ADDR_MASK 0x474 - -/* Lookup registers */ -#define QCA8K_REG_ATU_DATA0 0x600 -#define QCA8K_ATU_ADDR2_S 24 -#define QCA8K_ATU_ADDR3_S 16 -#define QCA8K_ATU_ADDR4_S 8 -#define QCA8K_REG_ATU_DATA1 0x604 -#define QCA8K_ATU_PORT_M 0x7f -#define QCA8K_ATU_PORT_S 16 -#define QCA8K_ATU_ADDR0_S 8 -#define QCA8K_REG_ATU_DATA2 0x608 -#define QCA8K_ATU_VID_M 0xfff -#define QCA8K_ATU_VID_S 8 -#define QCA8K_ATU_STATUS_M 0xf -#define QCA8K_ATU_STATUS_STATIC 0xf -#define QCA8K_REG_ATU_FUNC 0x60c -#define QCA8K_ATU_FUNC_BUSY BIT(31) -#define QCA8K_ATU_FUNC_PORT_EN BIT(14) -#define QCA8K_ATU_FUNC_MULTI_EN BIT(13) -#define QCA8K_ATU_FUNC_FULL BIT(12) -#define QCA8K_ATU_FUNC_PORT_M 0xf -#define QCA8K_ATU_FUNC_PORT_S 8 -#define QCA8K_REG_VTU_FUNC0 0x610 -#define QCA8K_VTU_FUNC0_VALID BIT(20) -#define QCA8K_VTU_FUNC0_IVL_EN BIT(19) -#define QCA8K_VTU_FUNC0_EG_MODE_S(_i) (4 + (_i) * 2) -#define QCA8K_VTU_FUNC0_EG_MODE_MASK 3 -#define QCA8K_VTU_FUNC0_EG_MODE_UNMOD 0 -#define QCA8K_VTU_FUNC0_EG_MODE_UNTAG 1 -#define QCA8K_VTU_FUNC0_EG_MODE_TAG 2 -#define QCA8K_VTU_FUNC0_EG_MODE_NOT 3 -#define QCA8K_REG_VTU_FUNC1 0x614 -#define QCA8K_VTU_FUNC1_BUSY BIT(31) -#define QCA8K_VTU_FUNC1_VID_S 16 -#define QCA8K_VTU_FUNC1_FULL BIT(4) -#define QCA8K_REG_ATU_CTRL 0x618 -#define QCA8K_ATU_AGE_TIME_MASK GENMASK(15, 0) -#define QCA8K_ATU_AGE_TIME(x) FIELD_PREP(QCA8K_ATU_AGE_TIME_MASK, (x)) -#define QCA8K_REG_GLOBAL_FW_CTRL0 0x620 -#define QCA8K_GLOBAL_FW_CTRL0_CPU_PORT_EN BIT(10) -#define QCA8K_REG_GLOBAL_FW_CTRL1 0x624 -#define QCA8K_GLOBAL_FW_CTRL1_IGMP_DP_S 24 -#define QCA8K_GLOBAL_FW_CTRL1_BC_DP_S 16 -#define QCA8K_GLOBAL_FW_CTRL1_MC_DP_S 8 -#define QCA8K_GLOBAL_FW_CTRL1_UC_DP_S 0 -#define QCA8K_PORT_LOOKUP_CTRL(_i) (0x660 + (_i) * 0xc) -#define QCA8K_PORT_LOOKUP_MEMBER GENMASK(6, 0) -#define QCA8K_PORT_LOOKUP_VLAN_MODE GENMASK(9, 8) -#define QCA8K_PORT_LOOKUP_VLAN_MODE_NONE (0 << 8) -#define QCA8K_PORT_LOOKUP_VLAN_MODE_FALLBACK (1 << 8) -#define QCA8K_PORT_LOOKUP_VLAN_MODE_CHECK (2 << 8) -#define QCA8K_PORT_LOOKUP_VLAN_MODE_SECURE (3 << 8) -#define QCA8K_PORT_LOOKUP_STATE_MASK GENMASK(18, 16) -#define QCA8K_PORT_LOOKUP_STATE_DISABLED (0 << 16) -#define QCA8K_PORT_LOOKUP_STATE_BLOCKING (1 << 16) -#define QCA8K_PORT_LOOKUP_STATE_LISTENING (2 << 16) -#define QCA8K_PORT_LOOKUP_STATE_LEARNING (3 << 16) -#define QCA8K_PORT_LOOKUP_STATE_FORWARD (4 << 16) -#define QCA8K_PORT_LOOKUP_STATE GENMASK(18, 16) -#define QCA8K_PORT_LOOKUP_LEARN BIT(20) -#define QCA8K_PORT_LOOKUP_LOOPBACK BIT(21) - -#define QCA8K_REG_GLOBAL_FC_THRESH 0x800 -#define QCA8K_GLOBAL_FC_GOL_XON_THRES(x) ((x) << 16) -#define QCA8K_GLOBAL_FC_GOL_XON_THRES_S GENMASK(24, 16) -#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES(x) ((x) << 0) -#define QCA8K_GLOBAL_FC_GOL_XOFF_THRES_S GENMASK(8, 0) - -#define QCA8K_REG_PORT_HOL_CTRL0(_i) (0x970 + (_i) * 0x8) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI0_BUF GENMASK(3, 0) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI0(x) ((x) << 0) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI1_BUF GENMASK(7, 4) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI1(x) ((x) << 4) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI2_BUF GENMASK(11, 8) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI2(x) ((x) << 8) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI3_BUF GENMASK(15, 12) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI3(x) ((x) << 12) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI4_BUF GENMASK(19, 16) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI4(x) ((x) << 16) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI5_BUF GENMASK(23, 20) -#define QCA8K_PORT_HOL_CTRL0_EG_PRI5(x) ((x) << 20) -#define QCA8K_PORT_HOL_CTRL0_EG_PORT_BUF GENMASK(29, 24) -#define QCA8K_PORT_HOL_CTRL0_EG_PORT(x) ((x) << 24) - -#define QCA8K_REG_PORT_HOL_CTRL1(_i) (0x974 + (_i) * 0x8) -#define QCA8K_PORT_HOL_CTRL1_ING_BUF GENMASK(3, 0) -#define QCA8K_PORT_HOL_CTRL1_ING(x) ((x) << 0) -#define QCA8K_PORT_HOL_CTRL1_EG_PRI_BUF_EN BIT(6) -#define QCA8K_PORT_HOL_CTRL1_EG_PORT_BUF_EN BIT(7) -#define QCA8K_PORT_HOL_CTRL1_WRED_EN BIT(8) -#define QCA8K_PORT_HOL_CTRL1_EG_MIRROR_EN BIT(16) - -/* Pkt edit registers */ -#define QCA8K_EGRESS_VLAN(x) (0x0c70 + (4 * (x / 2))) - -/* L3 registers */ -#define QCA8K_HROUTER_CONTROL 0xe00 -#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_M GENMASK(17, 16) -#define QCA8K_HROUTER_CONTROL_GLB_LOCKTIME_S 16 -#define QCA8K_HROUTER_CONTROL_ARP_AGE_MODE 1 -#define QCA8K_HROUTER_PBASED_CONTROL1 0xe08 -#define QCA8K_HROUTER_PBASED_CONTROL2 0xe0c -#define QCA8K_HNAT_CONTROL 0xe38 - -/* MIB registers */ -#define QCA8K_PORT_MIB_COUNTER(_i) (0x1000 + (_i) * 0x100) - -/* IPQ4019 PSGMII PHY registers */ -#define PSGMIIPHY_MODE_CONTROL 0x1b4 -#define PSGMIIPHY_MODE_ATHR_CSCO_MODE_25M BIT(0) -#define PSGMIIPHY_TX_CONTROL 0x288 -#define PSGMIIPHY_TX_CONTROL_MAGIC_VALUE 0x8380 -#define PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_1 0x9c -#define PSGMIIPHY_REG_PLL_VCO_CALIB_RESTART BIT(14) -#define PSGMIIPHY_VCO_CALIBRATION_CONTROL_REGISTER_2 0xa0 -#define PSGMIIPHY_REG_PLL_VCO_CALIB_READY BIT(0) - -#define QCA8K_PSGMII_CALB_NUM 100 -#define MII_QCA8075_SSTATUS 0x11 -#define QCA8075_PHY_SPEC_STATUS_LINK BIT(10) -#define QCA8075_MMD7_CRC_AND_PKTS_COUNT 0x8029 -#define QCA8075_MMD7_PKT_GEN_PKT_NUMB 0x8021 -#define QCA8075_MMD7_PKT_GEN_PKT_SIZE 0x8062 -#define QCA8075_MMD7_PKT_GEN_CTRL 0x8020 -#define QCA8075_MMD7_CNT_SELFCLR BIT(1) -#define QCA8075_MMD7_CNT_FRAME_CHK_EN BIT(0) -#define QCA8075_MMD7_PKT_GEN_START BIT(13) -#define QCA8075_MMD7_PKT_GEN_INPROGR BIT(15) -#define QCA8075_MMD7_IG_FRAME_RECV_CNT_HI 0x802a -#define QCA8075_MMD7_IG_FRAME_RECV_CNT_LO 0x802b -#define QCA8075_MMD7_IG_FRAME_ERR_CNT 0x802c -#define QCA8075_MMD7_EG_FRAME_RECV_CNT_HI 0x802d -#define QCA8075_MMD7_EG_FRAME_RECV_CNT_LO 0x802e -#define QCA8075_MMD7_EG_FRAME_ERR_CNT 0x802f -#define QCA8075_MMD7_MDIO_BRDCST_WRITE 0x8028 -#define QCA8075_MMD7_MDIO_BRDCST_WRITE_EN BIT(15) -#define QCA8075_MDIO_BRDCST_PHY_ADDR 0x1f -#define QCA8075_PKT_GEN_PKTS_COUNT 4096 - -enum { - QCA8K_PORT_SPEED_10M = 0, - QCA8K_PORT_SPEED_100M = 1, - QCA8K_PORT_SPEED_1000M = 2, - QCA8K_PORT_SPEED_ERR = 3, -}; - -enum qca8k_fdb_cmd { - QCA8K_FDB_FLUSH = 1, - QCA8K_FDB_LOAD = 2, - QCA8K_FDB_PURGE = 3, - QCA8K_FDB_FLUSH_PORT = 5, - QCA8K_FDB_NEXT = 6, - QCA8K_FDB_SEARCH = 7, -}; - -enum qca8k_vlan_cmd { - QCA8K_VLAN_FLUSH = 1, - QCA8K_VLAN_LOAD = 2, - QCA8K_VLAN_PURGE = 3, - QCA8K_VLAN_REMOVE_PORT = 4, - QCA8K_VLAN_NEXT = 5, - QCA8K_VLAN_READ = 6, -}; - -struct ar8xxx_port_status { - int enabled; -}; - -struct qca8k_priv { - struct regmap *regmap; - struct mii_bus *bus; - struct ar8xxx_port_status port_sts[QCA8K_NUM_PORTS]; - struct dsa_switch *ds; - struct mutex reg_mutex; - struct device *dev; - struct dsa_switch_ops ops; - unsigned int port_mtu[QCA8K_NUM_PORTS]; - - /* IPQ4019 specific */ - struct regmap *psgmii; - bool psgmii_calibrated; - struct phy_device *psgmii_ethphy; -}; - -struct qca8k_mib_desc { - unsigned int size; - unsigned int offset; - const char *name; -}; - -struct qca8k_fdb { - u16 vid; - u8 port_mask; - u8 aging; - u8 mac[6]; -}; - -#endif /* __QCA8K_H */ diff --git a/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/Makefile b/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/Makefile deleted file mode 100644 index 4f2db7283e..0000000000 --- a/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/Makefile +++ /dev/null @@ -1,8 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0-only -# -# Makefile for the IPQ ESS driver -# - -obj-$(CONFIG_QCOM_IPQ4019_ESS_EDMA) += ipq_ess.o - -ipq_ess-objs := ipqess.o ipqess_ethtool.o diff --git a/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/ipqess.c b/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/ipqess.c deleted file mode 100644 index ee33bb0166..0000000000 --- a/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/ipqess.c +++ /dev/null @@ -1,1336 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR ISC) -/* Copyright (c) 2014 - 2017, The Linux Foundation. All rights reserved. - * Copyright (c) 2017 - 2018, John Crispin - * Copyright (c) 2018 - 2019, Christian Lamparter - * Copyright (c) 2020 - 2021, Gabor Juhos - * - * Permission to use, copy, modify, and/or distribute this software for - * any purpose with or without fee is hereby granted, provided that the - * above copyright notice and this permission notice appear in all copies. - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT - * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -#include "ipqess.h" - -#define IPQESS_RRD_SIZE 16 -#define IPQESS_NEXT_IDX(X, Y) (((X) + 1) & ((Y) - 1)) -#define IPQESS_TX_DMA_BUF_LEN 0x3fff - -static void ipqess_w32(struct ipqess *ess, u32 reg, u32 val) -{ - writel(val, ess->hw_addr + reg); -} - -static u32 ipqess_r32(struct ipqess *ess, u16 reg) -{ - return readl(ess->hw_addr + reg); -} - -static void ipqess_m32(struct ipqess *ess, u32 mask, u32 val, u16 reg) -{ - u32 _val = ipqess_r32(ess, reg); - _val &= ~mask; - _val |= val; - ipqess_w32(ess, reg, _val); -} - -void ipqess_update_hw_stats(struct ipqess *ess) -{ - uint32_t *p; - u32 stat; - int i; - - lockdep_assert_held(&ess->stats_lock); - - p = (uint32_t *)&(ess->ipqessstats); - for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) { - stat = ipqess_r32(ess, IPQESS_REG_TX_STAT_PKT_Q(i)); - *p += stat; - p++; - } - - for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) { - stat = ipqess_r32(ess, IPQESS_REG_TX_STAT_BYTE_Q(i)); - *p += stat; - p++; - } - - for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) { - stat = ipqess_r32(ess, IPQESS_REG_RX_STAT_PKT_Q(i)); - *p += stat; - p++; - } - - for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) { - stat = ipqess_r32(ess, IPQESS_REG_RX_STAT_BYTE_Q(i)); - *p += stat; - p++; - } -} - -static int ipqess_tx_ring_alloc(struct ipqess *ess) -{ - struct device *dev = &ess->pdev->dev; - int i; - - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { - struct ipqess_tx_ring *tx_ring = &ess->tx_ring[i]; - size_t size; - u32 idx; - - tx_ring->ess = ess; - tx_ring->ring_id = i; - tx_ring->idx = i * 4; - tx_ring->count = IPQESS_TX_RING_SIZE; - tx_ring->nq = netdev_get_tx_queue(ess->netdev, i); - - size = sizeof(struct ipqess_buf) * IPQESS_TX_RING_SIZE; - tx_ring->buf = devm_kzalloc(dev, size, GFP_KERNEL); - if (!tx_ring->buf) { - netdev_err(ess->netdev, "buffer alloc of tx ring failed"); - return -ENOMEM; - } - - size = sizeof(struct ipqess_tx_desc) * IPQESS_TX_RING_SIZE; - tx_ring->hw_desc = dmam_alloc_coherent(dev, size, &tx_ring->dma, - GFP_KERNEL | __GFP_ZERO); - if (!tx_ring->hw_desc) { - netdev_err(ess->netdev, "descriptor allocation for tx ring failed"); - return -ENOMEM; - } - - ipqess_w32(ess, IPQESS_REG_TPD_BASE_ADDR_Q(tx_ring->idx), - (u32)tx_ring->dma); - - idx = ipqess_r32(ess, IPQESS_REG_TPD_IDX_Q(tx_ring->idx)); - idx >>= IPQESS_TPD_CONS_IDX_SHIFT; /* need u32 here */ - idx &= 0xffff; - tx_ring->head = tx_ring->tail = idx; - - ipqess_m32(ess, IPQESS_TPD_PROD_IDX_MASK << IPQESS_TPD_PROD_IDX_SHIFT, - idx, IPQESS_REG_TPD_IDX_Q(tx_ring->idx)); - ipqess_w32(ess, IPQESS_REG_TX_SW_CONS_IDX_Q(tx_ring->idx), idx); - ipqess_w32(ess, IPQESS_REG_TPD_RING_SIZE, IPQESS_TX_RING_SIZE); - } - - return 0; -} - -static int ipqess_tx_unmap_and_free(struct device *dev, struct ipqess_buf *buf) -{ - int len = 0; - - if (buf->flags & IPQESS_DESC_SINGLE) - dma_unmap_single(dev, buf->dma, buf->length, DMA_TO_DEVICE); - else if (buf->flags & IPQESS_DESC_PAGE) - dma_unmap_page(dev, buf->dma, buf->length, DMA_TO_DEVICE); - - if (buf->flags & IPQESS_DESC_LAST) { - len = buf->skb->len; - dev_kfree_skb_any(buf->skb); - } - - buf->flags = 0; - - return len; -} - -static void ipqess_tx_ring_free(struct ipqess *ess) -{ - int i; - - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { - int j; - - if (ess->tx_ring[i].hw_desc) - continue; - - for (j = 0; j < IPQESS_TX_RING_SIZE; j++) { - struct ipqess_buf *buf = &ess->tx_ring[i].buf[j]; - - ipqess_tx_unmap_and_free(&ess->pdev->dev, buf); - } - - ess->tx_ring[i].buf = NULL; - } -} - -static int ipqess_rx_buf_prepare(struct ipqess_buf *buf, - struct ipqess_rx_ring *rx_ring) -{ - /* Clean the HW DESC header, otherwise we might end up - * with a spurious desc because of random garbage */ - memset(buf->skb->data, 0, sizeof(struct ipqess_rx_desc)); - - buf->dma = dma_map_single(rx_ring->ppdev, buf->skb->data, - IPQESS_RX_HEAD_BUFF_SIZE, DMA_FROM_DEVICE); - if (dma_mapping_error(rx_ring->ppdev, buf->dma)) { - dev_err_once(rx_ring->ppdev, - "IPQESS DMA mapping failed for linear address %x", - buf->dma); - dev_kfree_skb_any(buf->skb); - buf->skb = NULL; - return -EFAULT; - } - - buf->length = IPQESS_RX_HEAD_BUFF_SIZE; - rx_ring->hw_desc[rx_ring->head] = (struct ipqess_rx_desc *)buf->dma; - rx_ring->head = (rx_ring->head + 1) % IPQESS_RX_RING_SIZE; - - ipqess_m32(rx_ring->ess, IPQESS_RFD_PROD_IDX_BITS, - (rx_ring->head + IPQESS_RX_RING_SIZE - 1) % IPQESS_RX_RING_SIZE, - IPQESS_REG_RFD_IDX_Q(rx_ring->idx)); - - return 0; -} - -/* locking is handled by the caller */ -static int ipqess_rx_buf_alloc_napi(struct ipqess_rx_ring *rx_ring) -{ - struct ipqess_buf *buf = &rx_ring->buf[rx_ring->head]; - - buf->skb = napi_alloc_skb(&rx_ring->napi_rx, - IPQESS_RX_HEAD_BUFF_SIZE); - if (!buf->skb) - return -ENOMEM; - - return ipqess_rx_buf_prepare(buf, rx_ring); -} - -static int ipqess_rx_buf_alloc(struct ipqess_rx_ring *rx_ring) -{ - struct ipqess_buf *buf = &rx_ring->buf[rx_ring->head]; - - buf->skb = netdev_alloc_skb_ip_align(rx_ring->ess->netdev, - IPQESS_RX_HEAD_BUFF_SIZE); - if (!buf->skb) - return -ENOMEM; - - return ipqess_rx_buf_prepare(buf, rx_ring); -} - -static void ipqess_refill_work(struct work_struct *work) -{ - struct ipqess_rx_ring_refill *rx_refill = container_of(work, - struct ipqess_rx_ring_refill, refill_work); - struct ipqess_rx_ring *rx_ring = rx_refill->rx_ring; - int refill = 0; - - /* don't let this loop by accident. */ - while (atomic_dec_and_test(&rx_ring->refill_count)) { - napi_disable(&rx_ring->napi_rx); - if (ipqess_rx_buf_alloc(rx_ring)) { - refill++; - dev_dbg(rx_ring->ppdev, - "Not all buffers were reallocated"); - } - napi_enable(&rx_ring->napi_rx); - } - - if (atomic_add_return(refill, &rx_ring->refill_count)) - schedule_work(&rx_refill->refill_work); -} - - -static int ipqess_rx_ring_alloc(struct ipqess *ess) -{ - int i; - - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { - int j; - - ess->rx_ring[i].ess = ess; - ess->rx_ring[i].ppdev = &ess->pdev->dev; - ess->rx_ring[i].ring_id = i; - ess->rx_ring[i].idx = i * 2; - - ess->rx_ring[i].buf = devm_kzalloc(&ess->pdev->dev, - sizeof(struct ipqess_buf) * IPQESS_RX_RING_SIZE, - GFP_KERNEL); - if (!ess->rx_ring[i].buf) - return -ENOMEM; - - ess->rx_ring[i].hw_desc = dmam_alloc_coherent(&ess->pdev->dev, - sizeof(struct ipqess_rx_desc) * IPQESS_RX_RING_SIZE, - &ess->rx_ring[i].dma, GFP_KERNEL); - if (!ess->rx_ring[i].hw_desc) - return -ENOMEM; - - for (j = 0; j < IPQESS_RX_RING_SIZE; j++) - if (ipqess_rx_buf_alloc(&ess->rx_ring[i]) < 0) - return -ENOMEM; - - ess->rx_refill[i].rx_ring = &ess->rx_ring[i]; - INIT_WORK(&ess->rx_refill[i].refill_work, ipqess_refill_work); - - ipqess_w32(ess, IPQESS_REG_RFD_BASE_ADDR_Q(ess->rx_ring[i].idx), - (u32)(ess->rx_ring[i].dma)); - } - - ipqess_w32(ess, IPQESS_REG_RX_DESC0, - (IPQESS_RX_HEAD_BUFF_SIZE << IPQESS_RX_BUF_SIZE_SHIFT) | - (IPQESS_RX_RING_SIZE << IPQESS_RFD_RING_SIZE_SHIFT)); - - return 0; -} - -static void ipqess_rx_ring_free(struct ipqess *ess) -{ - int i; - - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { - int j; - - atomic_set(&ess->rx_ring[i].refill_count, 0); - cancel_work_sync(&ess->rx_refill[i].refill_work); - - for (j = 0; j < IPQESS_RX_RING_SIZE; j++) { - dma_unmap_single(&ess->pdev->dev, - ess->rx_ring[i].buf[j].dma, - ess->rx_ring[i].buf[j].length, - DMA_FROM_DEVICE); - dev_kfree_skb_any(ess->rx_ring[i].buf[j].skb); - } - } -} - -static struct net_device_stats *ipqess_get_stats(struct net_device *netdev) -{ - struct ipqess *ess = netdev_priv(netdev); - - spin_lock(&ess->stats_lock); - ipqess_update_hw_stats(ess); - spin_unlock(&ess->stats_lock); - - return &ess->stats; -} - -static int ipqess_rx_poll(struct ipqess_rx_ring *rx_ring, int budget) -{ - u32 length = 0, num_desc, tail, rx_ring_tail; - int done = 0; - - rx_ring_tail = rx_ring->tail; - - tail = ipqess_r32(rx_ring->ess, IPQESS_REG_RFD_IDX_Q(rx_ring->idx)); - tail >>= IPQESS_RFD_CONS_IDX_SHIFT; - tail &= IPQESS_RFD_CONS_IDX_MASK; - - while (done < budget) { - struct sk_buff *skb; - struct ipqess_rx_desc *rd; - - if (rx_ring_tail == tail) - break; - - dma_unmap_single(rx_ring->ppdev, - rx_ring->buf[rx_ring_tail].dma, - rx_ring->buf[rx_ring_tail].length, - DMA_FROM_DEVICE); - - skb = xchg(&rx_ring->buf[rx_ring_tail].skb, NULL); - rd = (struct ipqess_rx_desc *)skb->data; - rx_ring_tail = IPQESS_NEXT_IDX(rx_ring_tail, IPQESS_RX_RING_SIZE); - - /* Check if RRD is valid */ - if (!(rd->rrd7 & IPQESS_RRD_DESC_VALID)) { - num_desc = 1; - dev_kfree_skb_any(skb); - goto skip; - } - - num_desc = rd->rrd1 & IPQESS_RRD_NUM_RFD_MASK; - length = rd->rrd6 & IPQESS_RRD_PKT_SIZE_MASK; - - skb_reserve(skb, IPQESS_RRD_SIZE); - if (num_desc > 1) { - /* can we use build_skb here ? */ - struct sk_buff *skb_prev = NULL; - int size_remaining; - int i; - - skb->data_len = 0; - skb->tail += (IPQESS_RX_HEAD_BUFF_SIZE - IPQESS_RRD_SIZE); - skb->len = skb->truesize = length; - size_remaining = length - (IPQESS_RX_HEAD_BUFF_SIZE - IPQESS_RRD_SIZE); - - for (i = 1; i < num_desc; i++) { - /* TODO: use build_skb ? */ - struct sk_buff *skb_temp = rx_ring->buf[rx_ring_tail].skb; - - dma_unmap_single(rx_ring->ppdev, - rx_ring->buf[rx_ring_tail].dma, - rx_ring->buf[rx_ring_tail].length, - DMA_FROM_DEVICE); - - skb_put(skb_temp, min(size_remaining, IPQESS_RX_HEAD_BUFF_SIZE)); - if (skb_prev) - skb_prev->next = rx_ring->buf[rx_ring_tail].skb; - else - skb_shinfo(skb)->frag_list = rx_ring->buf[rx_ring_tail].skb; - skb_prev = rx_ring->buf[rx_ring_tail].skb; - rx_ring->buf[rx_ring_tail].skb->next = NULL; - - skb->data_len += rx_ring->buf[rx_ring_tail].skb->len; - size_remaining -= rx_ring->buf[rx_ring_tail].skb->len; - - rx_ring_tail = IPQESS_NEXT_IDX(rx_ring_tail, IPQESS_RX_RING_SIZE); - } - - } else { - skb_put(skb, length); - } - - skb->dev = rx_ring->ess->netdev; - skb->protocol = eth_type_trans(skb, rx_ring->ess->netdev); - skb_record_rx_queue(skb, rx_ring->ring_id); - - if (rd->rrd6 & IPQESS_RRD_CSUM_FAIL_MASK) - skb_checksum_none_assert(skb); - else - skb->ip_summed = CHECKSUM_UNNECESSARY; - - if (rd->rrd7 & IPQESS_RRD_CVLAN) { - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021Q), rd->rrd4); - } else if (rd->rrd1 & IPQESS_RRD_SVLAN) { - __vlan_hwaccel_put_tag(skb, htons(ETH_P_8021AD), rd->rrd4); - } - napi_gro_receive(&rx_ring->napi_rx, skb); - - /* TODO: do we need to have these here ? */ - rx_ring->ess->stats.rx_packets++; - rx_ring->ess->stats.rx_bytes += length; - - done++; -skip: - - num_desc += atomic_xchg(&rx_ring->refill_count, 0); - while (num_desc) { - if (ipqess_rx_buf_alloc_napi(rx_ring)) { - num_desc = atomic_add_return(num_desc, - &rx_ring->refill_count); - if (num_desc >= ((4 * IPQESS_RX_RING_SIZE + 6) / 7)) - schedule_work(&rx_ring->ess->rx_refill[rx_ring->ring_id].refill_work); - break; - } - num_desc--; - } - } - - ipqess_w32(rx_ring->ess, IPQESS_REG_RX_SW_CONS_IDX_Q(rx_ring->idx), - rx_ring_tail); - rx_ring->tail = rx_ring_tail; - - return done; -} - -static int ipqess_tx_complete(struct ipqess_tx_ring *tx_ring, int budget) -{ - u32 tail; - int done = 0; - int total = 0, ret; - - tail = ipqess_r32(tx_ring->ess, IPQESS_REG_TPD_IDX_Q(tx_ring->idx)); - tail >>= IPQESS_TPD_CONS_IDX_SHIFT; - tail &= IPQESS_TPD_CONS_IDX_MASK; - - while ((tx_ring->tail != tail) && (done < budget)) { - //pr_info("freeing txq:%d tail:%d tailbuf:%p\n", tx_ring->idx, tx_ring->tail, &tx_ring->buf[tx_ring->tail]); - ret = ipqess_tx_unmap_and_free(&tx_ring->ess->pdev->dev, - &tx_ring->buf[tx_ring->tail]); - tx_ring->tail = IPQESS_NEXT_IDX(tx_ring->tail, tx_ring->count); - if (ret) { - total += ret; - done++; - } - } - - ipqess_w32(tx_ring->ess, - IPQESS_REG_TX_SW_CONS_IDX_Q(tx_ring->idx), - tx_ring->tail); - - if (netif_tx_queue_stopped(tx_ring->nq)) { - netdev_dbg(tx_ring->ess->netdev, "waking up tx queue %d\n", - tx_ring->idx); - netif_tx_wake_queue(tx_ring->nq); - } - - netdev_tx_completed_queue(tx_ring->nq, done, total); - - return done; -} - -static int ipqess_tx_napi(struct napi_struct *napi, int budget) -{ - struct ipqess_tx_ring *tx_ring = container_of(napi, struct ipqess_tx_ring, - napi_tx); - u32 tx_status; - int work_done = 0; - - tx_status = ipqess_r32(tx_ring->ess, IPQESS_REG_TX_ISR); - tx_status &= BIT(tx_ring->idx); - - work_done = ipqess_tx_complete(tx_ring, budget); - - ipqess_w32(tx_ring->ess, IPQESS_REG_TX_ISR, tx_status); - - if (likely(work_done < budget)) { - if (napi_complete_done(napi, work_done)) - ipqess_w32(tx_ring->ess, - IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx), 0x1); - } - - return work_done; -} - -static int ipqess_rx_napi(struct napi_struct *napi, int budget) -{ - struct ipqess_rx_ring *rx_ring = container_of(napi, struct ipqess_rx_ring, - napi_rx); - struct ipqess *ess = rx_ring->ess; - int remain_budget = budget; - int rx_done; - u32 rx_mask = BIT(rx_ring->idx); - u32 status; - -poll_again: - ipqess_w32(ess, IPQESS_REG_RX_ISR, rx_mask); - rx_done = ipqess_rx_poll(rx_ring, remain_budget); - - if (rx_done == remain_budget) - return budget; - - status = ipqess_r32(ess, IPQESS_REG_RX_ISR); - if (status & rx_mask) { - remain_budget -= rx_done; - goto poll_again; - } - - if (napi_complete_done(napi, rx_done + budget - remain_budget)) - ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(rx_ring->idx), 0x1); - - return rx_done + budget - remain_budget; -} - -static irqreturn_t ipqess_interrupt_tx(int irq, void *priv) -{ - struct ipqess_tx_ring *tx_ring = (struct ipqess_tx_ring *) priv; - - if (likely(napi_schedule_prep(&tx_ring->napi_tx))) { - ipqess_w32(tx_ring->ess, - IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx), - 0x0); - __napi_schedule(&tx_ring->napi_tx); - } - - return IRQ_HANDLED; -} - -static irqreturn_t ipqess_interrupt_rx(int irq, void *priv) -{ - struct ipqess_rx_ring *rx_ring = (struct ipqess_rx_ring *) priv; - - if (likely(napi_schedule_prep(&rx_ring->napi_rx))) { - ipqess_w32(rx_ring->ess, - IPQESS_REG_RX_INT_MASK_Q(rx_ring->idx), - 0x0); - __napi_schedule(&rx_ring->napi_rx); - } - - return IRQ_HANDLED; -} - -static void ipqess_irq_enable(struct ipqess *ess) -{ - int i; - - ipqess_w32(ess, IPQESS_REG_RX_ISR, 0xff); - ipqess_w32(ess, IPQESS_REG_TX_ISR, 0xffff); - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { - ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(ess->rx_ring[i].idx), 1); - ipqess_w32(ess, IPQESS_REG_TX_INT_MASK_Q(ess->tx_ring[i].idx), 1); - } -} - -static void ipqess_irq_disable(struct ipqess *ess) -{ - int i; - - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { - ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(ess->rx_ring[i].idx), 0); - ipqess_w32(ess, IPQESS_REG_TX_INT_MASK_Q(ess->tx_ring[i].idx), 0); - } -} - -static int __init ipqess_init(struct net_device *netdev) -{ - struct ipqess *ess = netdev_priv(netdev); - struct device_node *of_node = ess->pdev->dev.of_node; - return phylink_of_phy_connect(ess->phylink, of_node, 0); -} - -static void ipqess_uninit(struct net_device *netdev) -{ - struct ipqess *ess = netdev_priv(netdev); - - phylink_disconnect_phy(ess->phylink); -} - -static int ipqess_open(struct net_device *netdev) -{ - struct ipqess *ess = netdev_priv(netdev); - int i; - - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { - napi_enable(&ess->tx_ring[i].napi_tx); - napi_enable(&ess->rx_ring[i].napi_rx); - } - ipqess_irq_enable(ess); - phylink_start(ess->phylink); - netif_tx_start_all_queues(netdev); - - return 0; -} - -static int ipqess_stop(struct net_device *netdev) -{ - struct ipqess *ess = netdev_priv(netdev); - int i; - - netif_tx_stop_all_queues(netdev); - phylink_stop(ess->phylink); - ipqess_irq_disable(ess); - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { - napi_disable(&ess->tx_ring[i].napi_tx); - napi_disable(&ess->rx_ring[i].napi_rx); - } - - return 0; -} - -static int ipqess_do_ioctl(struct net_device *netdev, struct ifreq *ifr, int cmd) -{ - struct ipqess *ess = netdev_priv(netdev); - - switch (cmd) { - case SIOCGMIIPHY: - case SIOCGMIIREG: - case SIOCSMIIREG: - return phylink_mii_ioctl(ess->phylink, ifr, cmd); - default: - break; - } - - return -EOPNOTSUPP; -} - - -static inline u16 ipqess_tx_desc_available(struct ipqess_tx_ring *tx_ring) -{ - u16 count = 0; - - if (tx_ring->tail <= tx_ring->head) - count = IPQESS_TX_RING_SIZE; - - count += tx_ring->tail - tx_ring->head - 1; - - return count; -} - -static inline int ipqess_cal_txd_req(struct sk_buff *skb) -{ - int tpds; - - /* one TPD for the header, and one for each fragments */ - tpds = 1 + skb_shinfo(skb)->nr_frags; - if (skb_is_gso(skb) && skb_is_gso_v6(skb)) { - /* for LSOv2 one extra TPD is needed */ - tpds++; - } - - return tpds; -} - -static struct ipqess_buf *ipqess_get_tx_buffer(struct ipqess_tx_ring *tx_ring, - struct ipqess_tx_desc *desc) -{ - return &tx_ring->buf[desc - tx_ring->hw_desc]; -} - -static struct ipqess_tx_desc *ipqess_tx_desc_next(struct ipqess_tx_ring *tx_ring) -{ - struct ipqess_tx_desc *desc; - - desc = &tx_ring->hw_desc[tx_ring->head]; - tx_ring->head = IPQESS_NEXT_IDX(tx_ring->head, tx_ring->count); - - return desc; -} - -static void ipqess_rollback_tx(struct ipqess *eth, - struct ipqess_tx_desc *first_desc, int ring_id) -{ - struct ipqess_tx_ring *tx_ring = ð->tx_ring[ring_id]; - struct ipqess_buf *buf; - struct ipqess_tx_desc *desc = NULL; - u16 start_index, index; - - start_index = first_desc - tx_ring->hw_desc; - - index = start_index; - while (index != tx_ring->head) { - desc = &tx_ring->hw_desc[index]; - buf = &tx_ring->buf[index]; - ipqess_tx_unmap_and_free(ð->pdev->dev, buf); - memset(desc, 0, sizeof(struct ipqess_tx_desc)); - if (++index == tx_ring->count) - index = 0; - } - tx_ring->head = start_index; -} - -static bool ipqess_process_dsa_tag_sh(struct sk_buff *skb, u32 *word3) -{ - struct skb_shared_info *shinfo = skb_shinfo(skb); - struct ipq40xx_dsa_tag_data *tag_data; - - if (shinfo->dsa_tag_proto != DSA_TAG_PROTO_IPQ4019) - return false; - - tag_data = (struct ipq40xx_dsa_tag_data *)shinfo->dsa_tag_data; - - pr_debug("SH tag @ %08x, dp:%02x from_cpu:%u\n", - (u32)tag_data, tag_data->dp, tag_data->from_cpu); - - *word3 |= tag_data->dp << IPQESS_TPD_PORT_BITMAP_SHIFT; - if (tag_data->from_cpu) - *word3 |= BIT(IPQESS_TPD_FROM_CPU_SHIFT); - - return true; -} - -static void ipqess_get_dp_info(struct ipqess *ess, struct sk_buff *skb, - u32 *word3) -{ - if (netdev_uses_dsa(ess->netdev)) { - - if (ipqess_process_dsa_tag_sh(skb, word3)) - return; - } - - *word3 |= 0x3e << IPQESS_TPD_PORT_BITMAP_SHIFT; -} - -static int ipqess_tx_map_and_fill(struct ipqess_tx_ring *tx_ring, struct sk_buff *skb) -{ - struct ipqess_buf *buf = NULL; - struct platform_device *pdev = tx_ring->ess->pdev; - struct ipqess_tx_desc *desc = NULL, *first_desc = NULL; - u32 word1 = 0, word3 = 0, lso_word1 = 0, svlan_tag = 0; - u16 len; - int i; - - ipqess_get_dp_info(tx_ring->ess, skb, &word3); - - if (skb_is_gso(skb)) { - if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV4) { - lso_word1 |= IPQESS_TPD_IPV4_EN; - ip_hdr(skb)->check = 0; - tcp_hdr(skb)->check = ~csum_tcpudp_magic(ip_hdr(skb)->saddr, - ip_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); - } else if (skb_shinfo(skb)->gso_type & SKB_GSO_TCPV6) { - lso_word1 |= IPQESS_TPD_LSO_V2_EN; - ipv6_hdr(skb)->payload_len = 0; - tcp_hdr(skb)->check = ~csum_ipv6_magic(&ipv6_hdr(skb)->saddr, - &ipv6_hdr(skb)->daddr, 0, IPPROTO_TCP, 0); - } - - lso_word1 |= IPQESS_TPD_LSO_EN | - ((skb_shinfo(skb)->gso_size & IPQESS_TPD_MSS_MASK) << IPQESS_TPD_MSS_SHIFT) | - (skb_transport_offset(skb) << IPQESS_TPD_HDR_SHIFT); - } else if (likely(skb->ip_summed == CHECKSUM_PARTIAL)) { - u8 css, cso; - cso = skb_checksum_start_offset(skb); - css = cso + skb->csum_offset; - - word1 |= (IPQESS_TPD_CUSTOM_CSUM_EN); - word1 |= (cso >> 1) << IPQESS_TPD_HDR_SHIFT; - word1 |= ((css >> 1) << IPQESS_TPD_CUSTOM_CSUM_SHIFT); - } - - if (skb_vlan_tag_present(skb)) { - switch (skb->vlan_proto) { - case htons(ETH_P_8021Q): - word3 |= BIT(IPQESS_TX_INS_CVLAN); - word3 |= skb_vlan_tag_get(skb) << IPQESS_TX_CVLAN_TAG_SHIFT; - break; - case htons(ETH_P_8021AD): - word1 |= BIT(IPQESS_TX_INS_SVLAN); - svlan_tag = skb_vlan_tag_get(skb); - break; - default: - dev_err(&pdev->dev, "no ctag or stag present\n"); - goto vlan_tag_error; - } - } - - if (eth_type_vlan(skb->protocol)) - word1 |= IPQESS_TPD_VLAN_TAGGED; - - if (skb->protocol == htons(ETH_P_PPP_SES)) - word1 |= IPQESS_TPD_PPPOE_EN; - - len = skb_headlen(skb); - - first_desc = desc = ipqess_tx_desc_next(tx_ring); - if (lso_word1 & IPQESS_TPD_LSO_V2_EN) { - desc->addr = cpu_to_le16(skb->len); - desc->word1 = word1 | lso_word1; - desc->svlan_tag = svlan_tag; - desc->word3 = word3; - desc = ipqess_tx_desc_next(tx_ring); - } - - buf = ipqess_get_tx_buffer(tx_ring, desc); - buf->length = len; - buf->dma = dma_map_single(&pdev->dev, - skb->data, len, DMA_TO_DEVICE); - if (dma_mapping_error(&pdev->dev, buf->dma)) - goto dma_error; - - desc->addr = cpu_to_le32(buf->dma); - desc->len = cpu_to_le16(len); - - buf->flags |= IPQESS_DESC_SINGLE; - desc->word1 = word1 | lso_word1; - desc->svlan_tag = svlan_tag; - desc->word3 = word3; - - for (i = 0; i < skb_shinfo(skb)->nr_frags; i++) { - skb_frag_t *frag = &skb_shinfo(skb)->frags[i]; - len = skb_frag_size(frag); - desc = ipqess_tx_desc_next(tx_ring); - buf = ipqess_get_tx_buffer(tx_ring, desc); - buf->length = len; - buf->flags |= IPQESS_DESC_PAGE; - buf->dma = skb_frag_dma_map(&pdev->dev, frag, 0, len, DMA_TO_DEVICE); - if (dma_mapping_error(&pdev->dev, buf->dma)) - goto dma_error; - - desc->addr = cpu_to_le32(buf->dma); - desc->len = cpu_to_le16(len); - desc->svlan_tag = svlan_tag; - desc->word1 = word1 | lso_word1; - desc->word3 = word3; - } - desc->word1 |= 1 << IPQESS_TPD_EOP_SHIFT; - buf->skb = skb; - buf->flags |= IPQESS_DESC_LAST; - - return 0; - -dma_error: - ipqess_rollback_tx(tx_ring->ess, first_desc, tx_ring->ring_id); - dev_err(&pdev->dev, "TX DMA map failed\n"); - -vlan_tag_error: - return -ENOMEM; -} - -static inline void ipqess_kick_tx(struct ipqess_tx_ring *tx_ring) -{ - /* Ensure that all TPDs has been written completely */ - dma_wmb(); - - /* update software producer index */ - ipqess_w32(tx_ring->ess, IPQESS_REG_TPD_IDX_Q(tx_ring->idx), - tx_ring->head); -} - -static netdev_tx_t ipqess_xmit(struct sk_buff *skb, - struct net_device *netdev) -{ - struct ipqess *ess = netdev_priv(netdev); - struct ipqess_tx_ring *tx_ring; - int avail; - int tx_num; - int ret; - - tx_ring = &ess->tx_ring[skb_get_queue_mapping(skb)]; - tx_num = ipqess_cal_txd_req(skb); - avail = ipqess_tx_desc_available(tx_ring); - if (avail < tx_num) { - netdev_dbg(netdev, - "stopping tx queue %d, avail=%d req=%d im=%x\n", - tx_ring->idx, avail, tx_num, - ipqess_r32(tx_ring->ess, - IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx))); - netif_tx_stop_queue(tx_ring->nq); - ipqess_w32(tx_ring->ess, IPQESS_REG_TX_INT_MASK_Q(tx_ring->idx), 0x1); - ipqess_kick_tx(tx_ring); - return NETDEV_TX_BUSY; - } - - ret = ipqess_tx_map_and_fill(tx_ring, skb); - if (ret) { - dev_kfree_skb_any(skb); - ess->stats.tx_errors++; - goto err_out; - } - - ess->stats.tx_packets++; - ess->stats.tx_bytes += skb->len; - netdev_tx_sent_queue(tx_ring->nq, skb->len); - - if (!netdev_xmit_more() || netif_xmit_stopped(tx_ring->nq)) - ipqess_kick_tx(tx_ring); - -err_out: - return NETDEV_TX_OK; -} - -static int ipqess_set_mac_address(struct net_device *netdev, void *p) -{ - int ret = eth_mac_addr(netdev, p); - struct ipqess *ess = netdev_priv(netdev); - const char *macaddr = netdev->dev_addr; - - if (ret) - return ret; - -// spin_lock_bh(&mac->hw->page_lock); - ipqess_w32(ess, IPQESS_REG_MAC_CTRL1, - (macaddr[0] << 8) | macaddr[1]); - ipqess_w32(ess, IPQESS_REG_MAC_CTRL0, - (macaddr[2] << 24) | (macaddr[3] << 16) | - (macaddr[4] << 8) | macaddr[5]); -// spin_unlock_bh(&mac->hw->page_lock); - - return 0; -} - -static void ipqess_tx_timeout(struct net_device *netdev, unsigned int txq_id) -{ - struct ipqess *ess = netdev_priv(netdev); - struct ipqess_tx_ring *tr = &ess->tx_ring[txq_id]; - - netdev_warn(netdev, "hardware queue %d is in stuck?\n", - tr->idx); - - /* TODO: dump hardware queue */ -} - -static const struct net_device_ops ipqess_axi_netdev_ops = { - .ndo_init = ipqess_init, - .ndo_uninit = ipqess_uninit, - .ndo_open = ipqess_open, - .ndo_stop = ipqess_stop, - .ndo_do_ioctl = ipqess_do_ioctl, - .ndo_start_xmit = ipqess_xmit, - .ndo_get_stats = ipqess_get_stats, - .ndo_set_mac_address = ipqess_set_mac_address, - .ndo_tx_timeout = ipqess_tx_timeout, -}; - -static void ipqess_hw_stop(struct ipqess *ess) -{ - int i; - - /* disable all RX queue IRQs */ - for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) - ipqess_w32(ess, IPQESS_REG_RX_INT_MASK_Q(i), 0); - - /* disable all TX queue IRQs */ - for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) - ipqess_w32(ess, IPQESS_REG_TX_INT_MASK_Q(i), 0); - - /* disable all other IRQs */ - ipqess_w32(ess, IPQESS_REG_MISC_IMR, 0); - ipqess_w32(ess, IPQESS_REG_WOL_IMR, 0); - - /* clear the IRQ status registers */ - ipqess_w32(ess, IPQESS_REG_RX_ISR, 0xff); - ipqess_w32(ess, IPQESS_REG_TX_ISR, 0xffff); - ipqess_w32(ess, IPQESS_REG_MISC_ISR, 0x1fff); - ipqess_w32(ess, IPQESS_REG_WOL_ISR, 0x1); - ipqess_w32(ess, IPQESS_REG_WOL_CTRL, 0); - - /* disable RX and TX queues */ - ipqess_m32(ess, IPQESS_RXQ_CTRL_EN_MASK, 0, IPQESS_REG_RXQ_CTRL); - ipqess_m32(ess, IPQESS_TXQ_CTRL_TXQ_EN, 0, IPQESS_REG_TXQ_CTRL); -} - -static int ipqess_hw_init(struct ipqess *ess) -{ - u32 tmp; - int i, err; - - ipqess_hw_stop(ess); - - ipqess_m32(ess, BIT(IPQESS_INTR_SW_IDX_W_TYP_SHIFT), - IPQESS_INTR_SW_IDX_W_TYPE << IPQESS_INTR_SW_IDX_W_TYP_SHIFT, - IPQESS_REG_INTR_CTRL); - - /* enable IRQ delay slot */ - ipqess_w32(ess, IPQESS_REG_IRQ_MODRT_TIMER_INIT, - (IPQESS_TX_IMT << IPQESS_IRQ_MODRT_TX_TIMER_SHIFT) | - (IPQESS_RX_IMT << IPQESS_IRQ_MODRT_RX_TIMER_SHIFT)); - - /* Set Customer and Service VLAN TPIDs */ - ipqess_w32(ess, IPQESS_REG_VLAN_CFG, - (ETH_P_8021Q << IPQESS_VLAN_CFG_CVLAN_TPID_SHIFT) | - (ETH_P_8021AD << IPQESS_VLAN_CFG_SVLAN_TPID_SHIFT)); - - /* Configure the TX Queue bursting */ - ipqess_w32(ess, IPQESS_REG_TXQ_CTRL, - (IPQESS_TPD_BURST << IPQESS_TXQ_NUM_TPD_BURST_SHIFT) | - (IPQESS_TXF_BURST << IPQESS_TXQ_TXF_BURST_NUM_SHIFT) | - IPQESS_TXQ_CTRL_TPD_BURST_EN); - - /* Set RSS type */ - ipqess_w32(ess, IPQESS_REG_RSS_TYPE, - IPQESS_RSS_TYPE_IPV4TCP | IPQESS_RSS_TYPE_IPV6_TCP | - IPQESS_RSS_TYPE_IPV4_UDP | IPQESS_RSS_TYPE_IPV6UDP | - IPQESS_RSS_TYPE_IPV4 | IPQESS_RSS_TYPE_IPV6); - - /* Set RFD ring burst and threshold */ - ipqess_w32(ess, IPQESS_REG_RX_DESC1, - (IPQESS_RFD_BURST << IPQESS_RXQ_RFD_BURST_NUM_SHIFT) | - (IPQESS_RFD_THR << IPQESS_RXQ_RFD_PF_THRESH_SHIFT) | - (IPQESS_RFD_LTHR << IPQESS_RXQ_RFD_LOW_THRESH_SHIFT)); - - /* Set Rx FIFO - * - threshold to start to DMA data to host - */ - ipqess_w32(ess, IPQESS_REG_RXQ_CTRL, - IPQESS_FIFO_THRESH_128_BYTE | IPQESS_RXQ_CTRL_RMV_VLAN); - - err = ipqess_rx_ring_alloc(ess); - if (err) - return err; - - err = ipqess_tx_ring_alloc(ess); - if (err) - return err; - - /* Load all of ring base addresses above into the dma engine */ - ipqess_m32(ess, 0, BIT(IPQESS_LOAD_PTR_SHIFT), - IPQESS_REG_TX_SRAM_PART); - - /* Disable TX FIFO low watermark and high watermark */ - ipqess_w32(ess, IPQESS_REG_TXF_WATER_MARK, 0); - - /* Configure RSS indirection table. - * 128 hash will be configured in the following - * pattern: hash{0,1,2,3} = {Q0,Q2,Q4,Q6} respectively - * and so on - */ - for (i = 0; i < IPQESS_NUM_IDT; i++) - ipqess_w32(ess, IPQESS_REG_RSS_IDT(i), IPQESS_RSS_IDT_VALUE); - - /* Configure load balance mapping table. - * 4 table entry will be configured according to the - * following pattern: load_balance{0,1,2,3} = {Q0,Q1,Q3,Q4} - * respectively. - */ - ipqess_w32(ess, IPQESS_REG_LB_RING, IPQESS_LB_REG_VALUE); - - /* Configure Virtual queue for Tx rings */ - ipqess_w32(ess, IPQESS_REG_VQ_CTRL0, IPQESS_VQ_REG_VALUE); - ipqess_w32(ess, IPQESS_REG_VQ_CTRL1, IPQESS_VQ_REG_VALUE); - - /* Configure Max AXI Burst write size to 128 bytes*/ - ipqess_w32(ess, IPQESS_REG_AXIW_CTRL_MAXWRSIZE, - IPQESS_AXIW_MAXWRSIZE_VALUE); - - /* Enable TX queues */ - ipqess_m32(ess, 0, IPQESS_TXQ_CTRL_TXQ_EN, IPQESS_REG_TXQ_CTRL); - - /* Enable RX queues */ - tmp = 0; - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) - tmp |= IPQESS_RXQ_CTRL_EN(ess->rx_ring[i].idx); - - ipqess_m32(ess, IPQESS_RXQ_CTRL_EN_MASK, tmp, IPQESS_REG_RXQ_CTRL); - - return 0; -} - -static void ipqess_validate(struct phylink_config *config, - unsigned long *supported, - struct phylink_link_state *state) -{ - struct ipqess *ess = container_of(config, struct ipqess, phylink_config); - __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; - - if (state->interface != PHY_INTERFACE_MODE_INTERNAL) { - dev_err(&ess->pdev->dev, "unsupported interface mode: %d\n", - state->interface); - linkmode_zero(supported); - return; - } - - phylink_set_port_modes(mask); - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, Pause); - phylink_set(mask, Asym_Pause); - - linkmode_and(supported, supported, mask); - linkmode_and(state->advertising, state->advertising, mask); -} - -static void ipqess_mac_config(struct phylink_config *config, unsigned int mode, - const struct phylink_link_state *state) -{ - /* TODO */ -} - -static void ipqess_mac_link_down(struct phylink_config *config, - unsigned int mode, - phy_interface_t interface) -{ - /* TODO */ -} - -static void ipqess_mac_link_up(struct phylink_config *config, - struct phy_device *phy, unsigned int mode, - phy_interface_t interface, - int speed, int duplex, - bool tx_pause, bool rx_pause) -{ - /* TODO */ -} - -static struct phylink_mac_ops ipqess_phylink_mac_ops = { - .validate = ipqess_validate, - .mac_config = ipqess_mac_config, - .mac_link_up = ipqess_mac_link_up, - .mac_link_down = ipqess_mac_link_down, -}; - -static void ipqess_cleanup(struct ipqess *ess) -{ - ipqess_hw_stop(ess); - unregister_netdev(ess->netdev); - - ipqess_tx_ring_free(ess); - ipqess_rx_ring_free(ess); - - if (!IS_ERR_OR_NULL(ess->phylink)) - phylink_destroy(ess->phylink); -} - -static void ess_reset(struct ipqess *ess) -{ - reset_control_assert(ess->ess_rst); - - mdelay(10); - - reset_control_deassert(ess->ess_rst); - - /* Waiting for all inner tables to be flushed and reinitialized. - * This takes between 5 and 10ms. - */ - mdelay(10); -} - -static int ipqess_axi_probe(struct platform_device *pdev) -{ - struct device_node *np = pdev->dev.of_node; - struct ipqess *ess; - struct net_device *netdev; - struct resource *res; - int i, err = 0; - - netdev = devm_alloc_etherdev_mqs(&pdev->dev, sizeof(struct ipqess), - IPQESS_NETDEV_QUEUES, - IPQESS_NETDEV_QUEUES); - if (!netdev) - return -ENOMEM; - - ess = netdev_priv(netdev); - ess->netdev = netdev; - ess->pdev = pdev; - spin_lock_init(&ess->stats_lock); - SET_NETDEV_DEV(netdev, &pdev->dev); - platform_set_drvdata(pdev, netdev); - - err = of_get_mac_address(np, netdev->dev_addr); - if (err == -EPROBE_DEFER) - return -EPROBE_DEFER; - - if (err) { - - random_ether_addr(netdev->dev_addr); - dev_info(&ess->pdev->dev, "generated random MAC address %pM\n", - netdev->dev_addr); - netdev->addr_assign_type = NET_ADDR_RANDOM; - } - - res = platform_get_resource(pdev, IORESOURCE_MEM, 0); - ess->hw_addr = devm_ioremap_resource(&pdev->dev, res); - if (IS_ERR(ess->hw_addr)) { - err = PTR_ERR(ess->hw_addr); - goto err_out; - } - - ess->ess_clk = of_clk_get_by_name(np, "ess_clk"); - if (IS_ERR(ess->ess_clk)) { - dev_err(&pdev->dev, "Failed to get ess_clk\n"); - return PTR_ERR(ess->ess_clk); - } - - ess->ess_rst = devm_reset_control_get(&pdev->dev, "ess_rst"); - if (IS_ERR(ess->ess_rst)) { - dev_err(&pdev->dev, "Failed to get ess_rst control!\n"); - return PTR_ERR(ess->ess_rst); - } - - clk_prepare_enable(ess->ess_clk); - - ess_reset(ess); - - ess->phylink_config.dev = &netdev->dev; - ess->phylink_config.type = PHYLINK_NETDEV; - ess->phylink_config.pcs_poll = true; - - ess->phylink = phylink_create(&ess->phylink_config, - of_fwnode_handle(np), - PHY_INTERFACE_MODE_INTERNAL, - &ipqess_phylink_mac_ops); - if (IS_ERR(ess->phylink)) { - err = PTR_ERR(ess->phylink); - goto err_out; - } - - for (i = 0; i < IPQESS_MAX_TX_QUEUE; i++) { - ess->tx_irq[i] = platform_get_irq(pdev, i); - scnprintf(ess->tx_irq_names[i], sizeof(ess->tx_irq_names[i]), - "%s:txq%d", pdev->name, i); - } - - for (i = 0; i < IPQESS_MAX_RX_QUEUE; i++) { - ess->rx_irq[i] = platform_get_irq(pdev, i + IPQESS_MAX_TX_QUEUE); - scnprintf(ess->rx_irq_names[i], sizeof(ess->rx_irq_names[i]), - "%s:rxq%d", pdev->name, i); - } - -#undef NETIF_F_TSO6 -#define NETIF_F_TSO6 0 - - netdev->netdev_ops = &ipqess_axi_netdev_ops; - netdev->features = NETIF_F_HW_CSUM | NETIF_F_RXCSUM | - NETIF_F_HW_VLAN_CTAG_RX | - NETIF_F_HW_VLAN_CTAG_TX | - NETIF_F_TSO | NETIF_F_TSO6 | - NETIF_F_GRO | NETIF_F_SG; - /* feature change is not supported yet */ - netdev->hw_features = 0; - netdev->vlan_features = NETIF_F_HW_CSUM | NETIF_F_SG | NETIF_F_RXCSUM | - NETIF_F_TSO | NETIF_F_TSO6 | - NETIF_F_GRO; - netdev->watchdog_timeo = 5 * HZ; - netdev->base_addr = (u32) ess->hw_addr; - netdev->max_mtu = 9000; - netdev->gso_max_segs = IPQESS_TX_RING_SIZE / 2; - - ipqess_set_ethtool_ops(netdev); - - err = register_netdev(netdev); - if (err) - goto err_out; - - err = ipqess_hw_init(ess); - if (err) - goto err_out; - - dev_set_threaded(netdev, true); - - for (i = 0; i < IPQESS_NETDEV_QUEUES; i++) { - int qid; - - netif_tx_napi_add(netdev, &ess->tx_ring[i].napi_tx, - ipqess_tx_napi, 64); - netif_napi_add(netdev, - &ess->rx_ring[i].napi_rx, - ipqess_rx_napi, 64); - - qid = ess->tx_ring[i].idx; - err = devm_request_irq(&ess->netdev->dev, ess->tx_irq[qid], - ipqess_interrupt_tx, 0, ess->tx_irq_names[qid], - &ess->tx_ring[i]); - if (err) - goto err_out; - - qid = ess->rx_ring[i].idx; - err = devm_request_irq(&ess->netdev->dev, ess->rx_irq[qid], - ipqess_interrupt_rx, 0, ess->rx_irq_names[qid], - &ess->rx_ring[i]); - if (err) - goto err_out; - } - - return 0; - -err_out: - ipqess_cleanup(ess); - return err; -} - -static int ipqess_axi_remove(struct platform_device *pdev) -{ - const struct net_device *netdev = platform_get_drvdata(pdev); - struct ipqess *ess = netdev_priv(netdev); - - ipqess_cleanup(ess); - - return 0; -} - -static const struct of_device_id ipqess_of_mtable[] = { - {.compatible = "qcom,ipq4019-ess-edma" }, - {} -}; -MODULE_DEVICE_TABLE(of, ipqess_of_mtable); - -static struct platform_driver ipqess_axi_driver = { - .driver = { - .name = "ipqess-edma", - .of_match_table = ipqess_of_mtable, - }, - .probe = ipqess_axi_probe, - .remove = ipqess_axi_remove, -}; - -module_platform_driver(ipqess_axi_driver); - -MODULE_AUTHOR("Qualcomm Atheros Inc"); -MODULE_AUTHOR("John Crispin "); -MODULE_AUTHOR("Christian Lamparter "); -MODULE_AUTHOR("Gabor Juhos "); -MODULE_LICENSE("GPL"); diff --git a/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/ipqess.h b/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/ipqess.h deleted file mode 100644 index ca4cb7b2d4..0000000000 --- a/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/ipqess.h +++ /dev/null @@ -1,530 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR ISC) -/* Copyright (c) 2014 - 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2017 - 2018, John Crispin - * Copyright (c) 2018 - 2019, Christian Lamparter - * Copyright (c) 2020 - 2021, Gabor Juhos - * - * Permission to use, copy, modify, and/or distribute this software for - * any purpose with or without fee is hereby granted, provided that the - * above copyright notice and this permission notice appear in all copies. - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT - * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#ifndef _IPQESS_H_ -#define _IPQESS_H_ - -#define IPQESS_NETDEV_QUEUES 4 - -#define IPQESS_TPD_EOP_SHIFT 31 - -#define IPQESS_PORT_ID_SHIFT 12 -#define IPQESS_PORT_ID_MASK 0x7 - -/* tpd word 3 bit 18-28 */ -#define IPQESS_TPD_PORT_BITMAP_SHIFT 18 - -#define IPQESS_TPD_FROM_CPU_SHIFT 25 - -#define IPQESS_RX_RING_SIZE 128 -#define IPQESS_RX_HEAD_BUFF_SIZE 1540 -#define IPQESS_TX_RING_SIZE 128 -#define IPQESS_MAX_RX_QUEUE 8 -#define IPQESS_MAX_TX_QUEUE 16 - - -/* Configurations */ -#define IPQESS_INTR_CLEAR_TYPE 0 -#define IPQESS_INTR_SW_IDX_W_TYPE 0 -#define IPQESS_FIFO_THRESH_TYPE 0 -#define IPQESS_RSS_TYPE 0 -#define IPQESS_RX_IMT 0x0020 -#define IPQESS_TX_IMT 0x0050 -#define IPQESS_TPD_BURST 5 -#define IPQESS_TXF_BURST 0x100 -#define IPQESS_RFD_BURST 8 -#define IPQESS_RFD_THR 16 -#define IPQESS_RFD_LTHR 0 - -/* Flags used in transmit direction */ -#define IPQESS_DESC_LAST 0x1 -#define IPQESS_DESC_SINGLE 0x2 -#define IPQESS_DESC_PAGE 0x4 - -struct ipqesstool_statistics { - u32 tx_q0_pkt; - u32 tx_q1_pkt; - u32 tx_q2_pkt; - u32 tx_q3_pkt; - u32 tx_q4_pkt; - u32 tx_q5_pkt; - u32 tx_q6_pkt; - u32 tx_q7_pkt; - u32 tx_q8_pkt; - u32 tx_q9_pkt; - u32 tx_q10_pkt; - u32 tx_q11_pkt; - u32 tx_q12_pkt; - u32 tx_q13_pkt; - u32 tx_q14_pkt; - u32 tx_q15_pkt; - u32 tx_q0_byte; - u32 tx_q1_byte; - u32 tx_q2_byte; - u32 tx_q3_byte; - u32 tx_q4_byte; - u32 tx_q5_byte; - u32 tx_q6_byte; - u32 tx_q7_byte; - u32 tx_q8_byte; - u32 tx_q9_byte; - u32 tx_q10_byte; - u32 tx_q11_byte; - u32 tx_q12_byte; - u32 tx_q13_byte; - u32 tx_q14_byte; - u32 tx_q15_byte; - u32 rx_q0_pkt; - u32 rx_q1_pkt; - u32 rx_q2_pkt; - u32 rx_q3_pkt; - u32 rx_q4_pkt; - u32 rx_q5_pkt; - u32 rx_q6_pkt; - u32 rx_q7_pkt; - u32 rx_q0_byte; - u32 rx_q1_byte; - u32 rx_q2_byte; - u32 rx_q3_byte; - u32 rx_q4_byte; - u32 rx_q5_byte; - u32 rx_q6_byte; - u32 rx_q7_byte; - u32 tx_desc_error; -}; - -struct ipqess_tx_desc { - __le16 len; - __le16 svlan_tag; - __le32 word1; - __le32 addr; - __le32 word3; -} __aligned(16) __packed; - -struct ipqess_rx_desc { - u16 rrd0; - u16 rrd1; - u16 rrd2; - u16 rrd3; - u16 rrd4; - u16 rrd5; - u16 rrd6; - u16 rrd7; -} __aligned(16) __packed; - -struct ipqess_buf { - struct sk_buff *skb; - dma_addr_t dma; - u32 flags; - u16 length; -}; - -struct ipqess_tx_ring { - struct napi_struct napi_tx; - u32 idx; - int ring_id; - struct ipqess *ess; - struct netdev_queue *nq; - struct ipqess_tx_desc *hw_desc; - struct ipqess_buf *buf; - dma_addr_t dma; - u16 count; - u16 head; - u16 tail; -}; - -struct ipqess_rx_ring { - struct napi_struct napi_rx; - u32 idx; - int ring_id; - struct ipqess *ess; - struct device *ppdev; - struct ipqess_rx_desc **hw_desc; - struct ipqess_buf *buf; - dma_addr_t dma; - u16 head; - u16 tail; - atomic_t refill_count; -}; - -struct ipqess_rx_ring_refill { - struct ipqess_rx_ring *rx_ring; - struct work_struct refill_work; -}; - -#define IPQESS_IRQ_NAME_LEN 32 - -struct ipqess { - struct net_device *netdev; - void __iomem *hw_addr; - struct clk *ess_clk; - struct reset_control *ess_rst; - - struct ipqess_rx_ring rx_ring[IPQESS_NETDEV_QUEUES]; - - struct platform_device *pdev; - struct phylink *phylink; - struct phylink_config phylink_config; - struct ipqess_tx_ring tx_ring[IPQESS_NETDEV_QUEUES]; - - struct ipqesstool_statistics ipqessstats; - spinlock_t stats_lock; - struct net_device_stats stats; - - struct ipqess_rx_ring_refill rx_refill[IPQESS_NETDEV_QUEUES]; - u32 tx_irq[IPQESS_MAX_TX_QUEUE]; - char tx_irq_names[IPQESS_MAX_TX_QUEUE][IPQESS_IRQ_NAME_LEN]; - u32 rx_irq[IPQESS_MAX_RX_QUEUE]; - char rx_irq_names[IPQESS_MAX_TX_QUEUE][IPQESS_IRQ_NAME_LEN]; -}; - -static inline void build_test(void) -{ - struct ipqess *ess; - BUILD_BUG_ON(ARRAY_SIZE(ess->rx_ring) != ARRAY_SIZE(ess->rx_refill)); -} - -void ipqess_set_ethtool_ops(struct net_device *netdev); -void ipqess_update_hw_stats(struct ipqess *ess); - -/* register definition */ -#define IPQESS_REG_MAS_CTRL 0x0 -#define IPQESS_REG_TIMEOUT_CTRL 0x004 -#define IPQESS_REG_DBG0 0x008 -#define IPQESS_REG_DBG1 0x00C -#define IPQESS_REG_SW_CTRL0 0x100 -#define IPQESS_REG_SW_CTRL1 0x104 - -/* Interrupt Status Register */ -#define IPQESS_REG_RX_ISR 0x200 -#define IPQESS_REG_TX_ISR 0x208 -#define IPQESS_REG_MISC_ISR 0x210 -#define IPQESS_REG_WOL_ISR 0x218 - -#define IPQESS_MISC_ISR_RX_URG_Q(x) (1 << x) - -#define IPQESS_MISC_ISR_AXIR_TIMEOUT 0x00000100 -#define IPQESS_MISC_ISR_AXIR_ERR 0x00000200 -#define IPQESS_MISC_ISR_TXF_DEAD 0x00000400 -#define IPQESS_MISC_ISR_AXIW_ERR 0x00000800 -#define IPQESS_MISC_ISR_AXIW_TIMEOUT 0x00001000 - -#define IPQESS_WOL_ISR 0x00000001 - -/* Interrupt Mask Register */ -#define IPQESS_REG_MISC_IMR 0x214 -#define IPQESS_REG_WOL_IMR 0x218 - -#define IPQESS_RX_IMR_NORMAL_MASK 0x1 -#define IPQESS_TX_IMR_NORMAL_MASK 0x1 -#define IPQESS_MISC_IMR_NORMAL_MASK 0x80001FFF -#define IPQESS_WOL_IMR_NORMAL_MASK 0x1 - -/* Edma receive consumer index */ -#define IPQESS_REG_RX_SW_CONS_IDX_Q(x) (0x220 + ((x) << 2)) /* x is the queue id */ - -/* Edma transmit consumer index */ -#define IPQESS_REG_TX_SW_CONS_IDX_Q(x) (0x240 + ((x) << 2)) /* x is the queue id */ - -/* IRQ Moderator Initial Timer Register */ -#define IPQESS_REG_IRQ_MODRT_TIMER_INIT 0x280 -#define IPQESS_IRQ_MODRT_TIMER_MASK 0xFFFF -#define IPQESS_IRQ_MODRT_RX_TIMER_SHIFT 0 -#define IPQESS_IRQ_MODRT_TX_TIMER_SHIFT 16 - -/* Interrupt Control Register */ -#define IPQESS_REG_INTR_CTRL 0x284 -#define IPQESS_INTR_CLR_TYP_SHIFT 0 -#define IPQESS_INTR_SW_IDX_W_TYP_SHIFT 1 -#define IPQESS_INTR_CLEAR_TYPE_W1 0 -#define IPQESS_INTR_CLEAR_TYPE_R 1 - -/* RX Interrupt Mask Register */ -#define IPQESS_REG_RX_INT_MASK_Q(x) (0x300 + ((x) << 2)) /* x = queue id */ - -/* TX Interrupt mask register */ -#define IPQESS_REG_TX_INT_MASK_Q(x) (0x340 + ((x) << 2)) /* x = queue id */ - -/* Load Ptr Register - * Software sets this bit after the initialization of the head and tail - */ -#define IPQESS_REG_TX_SRAM_PART 0x400 -#define IPQESS_LOAD_PTR_SHIFT 16 - -/* TXQ Control Register */ -#define IPQESS_REG_TXQ_CTRL 0x404 -#define IPQESS_TXQ_CTRL_IP_OPTION_EN 0x10 -#define IPQESS_TXQ_CTRL_TXQ_EN 0x20 -#define IPQESS_TXQ_CTRL_ENH_MODE 0x40 -#define IPQESS_TXQ_CTRL_LS_8023_EN 0x80 -#define IPQESS_TXQ_CTRL_TPD_BURST_EN 0x100 -#define IPQESS_TXQ_CTRL_LSO_BREAK_EN 0x200 -#define IPQESS_TXQ_NUM_TPD_BURST_MASK 0xF -#define IPQESS_TXQ_TXF_BURST_NUM_MASK 0xFFFF -#define IPQESS_TXQ_NUM_TPD_BURST_SHIFT 0 -#define IPQESS_TXQ_TXF_BURST_NUM_SHIFT 16 - -#define IPQESS_REG_TXF_WATER_MARK 0x408 /* In 8-bytes */ -#define IPQESS_TXF_WATER_MARK_MASK 0x0FFF -#define IPQESS_TXF_LOW_WATER_MARK_SHIFT 0 -#define IPQESS_TXF_HIGH_WATER_MARK_SHIFT 16 -#define IPQESS_TXQ_CTRL_BURST_MODE_EN 0x80000000 - -/* WRR Control Register */ -#define IPQESS_REG_WRR_CTRL_Q0_Q3 0x40c -#define IPQESS_REG_WRR_CTRL_Q4_Q7 0x410 -#define IPQESS_REG_WRR_CTRL_Q8_Q11 0x414 -#define IPQESS_REG_WRR_CTRL_Q12_Q15 0x418 - -/* Weight round robin(WRR), it takes queue as input, and computes - * starting bits where we need to write the weight for a particular - * queue - */ -#define IPQESS_WRR_SHIFT(x) (((x) * 5) % 20) - -/* Tx Descriptor Control Register */ -#define IPQESS_REG_TPD_RING_SIZE 0x41C -#define IPQESS_TPD_RING_SIZE_SHIFT 0 -#define IPQESS_TPD_RING_SIZE_MASK 0xFFFF - -/* Transmit descriptor base address */ -#define IPQESS_REG_TPD_BASE_ADDR_Q(x) (0x420 + ((x) << 2)) /* x = queue id */ - -/* TPD Index Register */ -#define IPQESS_REG_TPD_IDX_Q(x) (0x460 + ((x) << 2)) /* x = queue id */ - -#define IPQESS_TPD_PROD_IDX_BITS 0x0000FFFF -#define IPQESS_TPD_CONS_IDX_BITS 0xFFFF0000 -#define IPQESS_TPD_PROD_IDX_MASK 0xFFFF -#define IPQESS_TPD_CONS_IDX_MASK 0xFFFF -#define IPQESS_TPD_PROD_IDX_SHIFT 0 -#define IPQESS_TPD_CONS_IDX_SHIFT 16 - -/* TX Virtual Queue Mapping Control Register */ -#define IPQESS_REG_VQ_CTRL0 0x4A0 -#define IPQESS_REG_VQ_CTRL1 0x4A4 - -/* Virtual QID shift, it takes queue as input, and computes - * Virtual QID position in virtual qid control register - */ -#define IPQESS_VQ_ID_SHIFT(i) (((i) * 3) % 24) - -/* Virtual Queue Default Value */ -#define IPQESS_VQ_REG_VALUE 0x240240 - -/* Tx side Port Interface Control Register */ -#define IPQESS_REG_PORT_CTRL 0x4A8 -#define IPQESS_PAD_EN_SHIFT 15 - -/* Tx side VLAN Configuration Register */ -#define IPQESS_REG_VLAN_CFG 0x4AC - -#define IPQESS_VLAN_CFG_SVLAN_TPID_SHIFT 0 -#define IPQESS_VLAN_CFG_SVLAN_TPID_MASK 0xffff -#define IPQESS_VLAN_CFG_CVLAN_TPID_SHIFT 16 -#define IPQESS_VLAN_CFG_CVLAN_TPID_MASK 0xffff - -#define IPQESS_TX_CVLAN 16 -#define IPQESS_TX_INS_CVLAN 17 -#define IPQESS_TX_CVLAN_TAG_SHIFT 0 - -#define IPQESS_TX_SVLAN 14 -#define IPQESS_TX_INS_SVLAN 15 -#define IPQESS_TX_SVLAN_TAG_SHIFT 16 - -/* Tx Queue Packet Statistic Register */ -#define IPQESS_REG_TX_STAT_PKT_Q(x) (0x700 + ((x) << 3)) /* x = queue id */ - -#define IPQESS_TX_STAT_PKT_MASK 0xFFFFFF - -/* Tx Queue Byte Statistic Register */ -#define IPQESS_REG_TX_STAT_BYTE_Q(x) (0x704 + ((x) << 3)) /* x = queue id */ - -/* Load Balance Based Ring Offset Register */ -#define IPQESS_REG_LB_RING 0x800 -#define IPQESS_LB_RING_ENTRY_MASK 0xff -#define IPQESS_LB_RING_ID_MASK 0x7 -#define IPQESS_LB_RING_PROFILE_ID_MASK 0x3 -#define IPQESS_LB_RING_ENTRY_BIT_OFFSET 8 -#define IPQESS_LB_RING_ID_OFFSET 0 -#define IPQESS_LB_RING_PROFILE_ID_OFFSET 3 -#define IPQESS_LB_REG_VALUE 0x6040200 - -/* Load Balance Priority Mapping Register */ -#define IPQESS_REG_LB_PRI_START 0x804 -#define IPQESS_REG_LB_PRI_END 0x810 -#define IPQESS_LB_PRI_REG_INC 4 -#define IPQESS_LB_PRI_ENTRY_BIT_OFFSET 4 -#define IPQESS_LB_PRI_ENTRY_MASK 0xf - -/* RSS Priority Mapping Register */ -#define IPQESS_REG_RSS_PRI 0x820 -#define IPQESS_RSS_PRI_ENTRY_MASK 0xf -#define IPQESS_RSS_RING_ID_MASK 0x7 -#define IPQESS_RSS_PRI_ENTRY_BIT_OFFSET 4 - -/* RSS Indirection Register */ -#define IPQESS_REG_RSS_IDT(x) (0x840 + ((x) << 2)) /* x = No. of indirection table */ -#define IPQESS_NUM_IDT 16 -#define IPQESS_RSS_IDT_VALUE 0x64206420 - -/* Default RSS Ring Register */ -#define IPQESS_REG_DEF_RSS 0x890 -#define IPQESS_DEF_RSS_MASK 0x7 - -/* RSS Hash Function Type Register */ -#define IPQESS_REG_RSS_TYPE 0x894 -#define IPQESS_RSS_TYPE_NONE 0x01 -#define IPQESS_RSS_TYPE_IPV4TCP 0x02 -#define IPQESS_RSS_TYPE_IPV6_TCP 0x04 -#define IPQESS_RSS_TYPE_IPV4_UDP 0x08 -#define IPQESS_RSS_TYPE_IPV6UDP 0x10 -#define IPQESS_RSS_TYPE_IPV4 0x20 -#define IPQESS_RSS_TYPE_IPV6 0x40 -#define IPQESS_RSS_HASH_MODE_MASK 0x7f - -#define IPQESS_REG_RSS_HASH_VALUE 0x8C0 - -#define IPQESS_REG_RSS_TYPE_RESULT 0x8C4 - -#define IPQESS_HASH_TYPE_START 0 -#define IPQESS_HASH_TYPE_END 5 -#define IPQESS_HASH_TYPE_SHIFT 12 - -#define IPQESS_RFS_FLOW_ENTRIES 1024 -#define IPQESS_RFS_FLOW_ENTRIES_MASK (IPQESS_RFS_FLOW_ENTRIES - 1) -#define IPQESS_RFS_EXPIRE_COUNT_PER_CALL 128 - -/* RFD Base Address Register */ -#define IPQESS_REG_RFD_BASE_ADDR_Q(x) (0x950 + ((x) << 2)) /* x = queue id */ - -/* RFD Index Register */ -#define IPQESS_REG_RFD_IDX_Q(x) (0x9B0 + ((x) << 2)) /* x = queue id */ - -#define IPQESS_RFD_PROD_IDX_BITS 0x00000FFF -#define IPQESS_RFD_CONS_IDX_BITS 0x0FFF0000 -#define IPQESS_RFD_PROD_IDX_MASK 0xFFF -#define IPQESS_RFD_CONS_IDX_MASK 0xFFF -#define IPQESS_RFD_PROD_IDX_SHIFT 0 -#define IPQESS_RFD_CONS_IDX_SHIFT 16 - -/* Rx Descriptor Control Register */ -#define IPQESS_REG_RX_DESC0 0xA10 -#define IPQESS_RFD_RING_SIZE_MASK 0xFFF -#define IPQESS_RX_BUF_SIZE_MASK 0xFFFF -#define IPQESS_RFD_RING_SIZE_SHIFT 0 -#define IPQESS_RX_BUF_SIZE_SHIFT 16 - -#define IPQESS_REG_RX_DESC1 0xA14 -#define IPQESS_RXQ_RFD_BURST_NUM_MASK 0x3F -#define IPQESS_RXQ_RFD_PF_THRESH_MASK 0x1F -#define IPQESS_RXQ_RFD_LOW_THRESH_MASK 0xFFF -#define IPQESS_RXQ_RFD_BURST_NUM_SHIFT 0 -#define IPQESS_RXQ_RFD_PF_THRESH_SHIFT 8 -#define IPQESS_RXQ_RFD_LOW_THRESH_SHIFT 16 - -/* RXQ Control Register */ -#define IPQESS_REG_RXQ_CTRL 0xA18 -#define IPQESS_FIFO_THRESH_TYPE_SHIF 0 -#define IPQESS_FIFO_THRESH_128_BYTE 0x0 -#define IPQESS_FIFO_THRESH_64_BYTE 0x1 -#define IPQESS_RXQ_CTRL_RMV_VLAN 0x00000002 -#define IPQESS_RXQ_CTRL_EN_MASK GENMASK(15, 8) -#define IPQESS_RXQ_CTRL_EN(__qid) BIT(8 + (__qid)) - -/* AXI Burst Size Config */ -#define IPQESS_REG_AXIW_CTRL_MAXWRSIZE 0xA1C -#define IPQESS_AXIW_MAXWRSIZE_VALUE 0x0 - -/* Rx Statistics Register */ -#define IPQESS_REG_RX_STAT_BYTE_Q(x) (0xA30 + ((x) << 2)) /* x = queue id */ -#define IPQESS_REG_RX_STAT_PKT_Q(x) (0xA50 + ((x) << 2)) /* x = queue id */ - -/* WoL Pattern Length Register */ -#define IPQESS_REG_WOL_PATTERN_LEN0 0xC00 -#define IPQESS_WOL_PT_LEN_MASK 0xFF -#define IPQESS_WOL_PT0_LEN_SHIFT 0 -#define IPQESS_WOL_PT1_LEN_SHIFT 8 -#define IPQESS_WOL_PT2_LEN_SHIFT 16 -#define IPQESS_WOL_PT3_LEN_SHIFT 24 - -#define IPQESS_REG_WOL_PATTERN_LEN1 0xC04 -#define IPQESS_WOL_PT4_LEN_SHIFT 0 -#define IPQESS_WOL_PT5_LEN_SHIFT 8 -#define IPQESS_WOL_PT6_LEN_SHIFT 16 - -/* WoL Control Register */ -#define IPQESS_REG_WOL_CTRL 0xC08 -#define IPQESS_WOL_WK_EN 0x00000001 -#define IPQESS_WOL_MG_EN 0x00000002 -#define IPQESS_WOL_PT0_EN 0x00000004 -#define IPQESS_WOL_PT1_EN 0x00000008 -#define IPQESS_WOL_PT2_EN 0x00000010 -#define IPQESS_WOL_PT3_EN 0x00000020 -#define IPQESS_WOL_PT4_EN 0x00000040 -#define IPQESS_WOL_PT5_EN 0x00000080 -#define IPQESS_WOL_PT6_EN 0x00000100 - -/* MAC Control Register */ -#define IPQESS_REG_MAC_CTRL0 0xC20 -#define IPQESS_REG_MAC_CTRL1 0xC24 - -/* WoL Pattern Register */ -#define IPQESS_REG_WOL_PATTERN_START 0x5000 -#define IPQESS_PATTERN_PART_REG_OFFSET 0x40 - - -/* TX descriptor fields */ -#define IPQESS_TPD_HDR_SHIFT 0 -#define IPQESS_TPD_PPPOE_EN 0x00000100 -#define IPQESS_TPD_IP_CSUM_EN 0x00000200 -#define IPQESS_TPD_TCP_CSUM_EN 0x0000400 -#define IPQESS_TPD_UDP_CSUM_EN 0x00000800 -#define IPQESS_TPD_CUSTOM_CSUM_EN 0x00000C00 -#define IPQESS_TPD_LSO_EN 0x00001000 -#define IPQESS_TPD_LSO_V2_EN 0x00002000 -/* The VLAN_TAGGED bit is not used in the publicly available - * drivers. The definition has been stolen from the Atheros - * 'alx' driver (drivers/net/ethernet/atheros/alx/hw.h). It - * seems that it has the same meaning in regard to the EDMA - * hardware. - */ -#define IPQESS_TPD_VLAN_TAGGED 0x00004000 -#define IPQESS_TPD_IPV4_EN 0x00010000 -#define IPQESS_TPD_MSS_MASK 0x1FFF -#define IPQESS_TPD_MSS_SHIFT 18 -#define IPQESS_TPD_CUSTOM_CSUM_SHIFT 18 - -/* RRD descriptor fields */ -#define IPQESS_RRD_NUM_RFD_MASK 0x000F -#define IPQESS_RRD_PKT_SIZE_MASK 0x3FFF -#define IPQESS_RRD_SRC_PORT_NUM_MASK 0x4000 -#define IPQESS_RRD_SVLAN 0x8000 -#define IPQESS_RRD_FLOW_COOKIE_MASK 0x07FF; - -#define IPQESS_RRD_PKT_SIZE_MASK 0x3FFF -#define IPQESS_RRD_CSUM_FAIL_MASK 0xC000 -#define IPQESS_RRD_CVLAN 0x0001 -#define IPQESS_RRD_DESC_VALID 0x8000 - -#define IPQESS_RRD_PRIORITY_SHIFT 4 -#define IPQESS_RRD_PRIORITY_MASK 0x7 -#define IPQESS_RRD_PORT_TYPE_SHIFT 7 -#define IPQESS_RRD_PORT_TYPE_MASK 0x1F - -#endif diff --git a/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/ipqess_ethtool.c b/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/ipqess_ethtool.c deleted file mode 100644 index da5fb4deed..0000000000 --- a/target/linux/ipq40xx/files-5.15/drivers/net/ethernet/qualcomm/ipqess/ipqess_ethtool.c +++ /dev/null @@ -1,175 +0,0 @@ -// SPDX-License-Identifier: (GPL-2.0 OR ISC) -/* Copyright (c) 2015 - 2016, The Linux Foundation. All rights reserved. - * Copyright (c) 2017 - 2018, John Crispin - * - * Permission to use, copy, modify, and/or distribute this software for - * any purpose with or without fee is hereby granted, provided that the - * above copyright notice and this permission notice appear in all copies. - * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES - * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR - * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES - * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN - * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT - * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. - */ - -#include -#include -#include -#include - -#include "ipqess.h" - -struct ipqesstool_stats { - uint8_t string[ETH_GSTRING_LEN]; - uint32_t offset; -}; - -#define IPQESS_STAT(m) offsetof(struct ipqesstool_statistics, m) -#define DRVINFO_LEN 32 - -static const struct ipqesstool_stats ipqess_stats[] = { - {"tx_q0_pkt", IPQESS_STAT(tx_q0_pkt)}, - {"tx_q1_pkt", IPQESS_STAT(tx_q1_pkt)}, - {"tx_q2_pkt", IPQESS_STAT(tx_q2_pkt)}, - {"tx_q3_pkt", IPQESS_STAT(tx_q3_pkt)}, - {"tx_q4_pkt", IPQESS_STAT(tx_q4_pkt)}, - {"tx_q5_pkt", IPQESS_STAT(tx_q5_pkt)}, - {"tx_q6_pkt", IPQESS_STAT(tx_q6_pkt)}, - {"tx_q7_pkt", IPQESS_STAT(tx_q7_pkt)}, - {"tx_q8_pkt", IPQESS_STAT(tx_q8_pkt)}, - {"tx_q9_pkt", IPQESS_STAT(tx_q9_pkt)}, - {"tx_q10_pkt", IPQESS_STAT(tx_q10_pkt)}, - {"tx_q11_pkt", IPQESS_STAT(tx_q11_pkt)}, - {"tx_q12_pkt", IPQESS_STAT(tx_q12_pkt)}, - {"tx_q13_pkt", IPQESS_STAT(tx_q13_pkt)}, - {"tx_q14_pkt", IPQESS_STAT(tx_q14_pkt)}, - {"tx_q15_pkt", IPQESS_STAT(tx_q15_pkt)}, - {"tx_q0_byte", IPQESS_STAT(tx_q0_byte)}, - {"tx_q1_byte", IPQESS_STAT(tx_q1_byte)}, - {"tx_q2_byte", IPQESS_STAT(tx_q2_byte)}, - {"tx_q3_byte", IPQESS_STAT(tx_q3_byte)}, - {"tx_q4_byte", IPQESS_STAT(tx_q4_byte)}, - {"tx_q5_byte", IPQESS_STAT(tx_q5_byte)}, - {"tx_q6_byte", IPQESS_STAT(tx_q6_byte)}, - {"tx_q7_byte", IPQESS_STAT(tx_q7_byte)}, - {"tx_q8_byte", IPQESS_STAT(tx_q8_byte)}, - {"tx_q9_byte", IPQESS_STAT(tx_q9_byte)}, - {"tx_q10_byte", IPQESS_STAT(tx_q10_byte)}, - {"tx_q11_byte", IPQESS_STAT(tx_q11_byte)}, - {"tx_q12_byte", IPQESS_STAT(tx_q12_byte)}, - {"tx_q13_byte", IPQESS_STAT(tx_q13_byte)}, - {"tx_q14_byte", IPQESS_STAT(tx_q14_byte)}, - {"tx_q15_byte", IPQESS_STAT(tx_q15_byte)}, - {"rx_q0_pkt", IPQESS_STAT(rx_q0_pkt)}, - {"rx_q1_pkt", IPQESS_STAT(rx_q1_pkt)}, - {"rx_q2_pkt", IPQESS_STAT(rx_q2_pkt)}, - {"rx_q3_pkt", IPQESS_STAT(rx_q3_pkt)}, - {"rx_q4_pkt", IPQESS_STAT(rx_q4_pkt)}, - {"rx_q5_pkt", IPQESS_STAT(rx_q5_pkt)}, - {"rx_q6_pkt", IPQESS_STAT(rx_q6_pkt)}, - {"rx_q7_pkt", IPQESS_STAT(rx_q7_pkt)}, - {"rx_q0_byte", IPQESS_STAT(rx_q0_byte)}, - {"rx_q1_byte", IPQESS_STAT(rx_q1_byte)}, - {"rx_q2_byte", IPQESS_STAT(rx_q2_byte)}, - {"rx_q3_byte", IPQESS_STAT(rx_q3_byte)}, - {"rx_q4_byte", IPQESS_STAT(rx_q4_byte)}, - {"rx_q5_byte", IPQESS_STAT(rx_q5_byte)}, - {"rx_q6_byte", IPQESS_STAT(rx_q6_byte)}, - {"rx_q7_byte", IPQESS_STAT(rx_q7_byte)}, - {"tx_desc_error", IPQESS_STAT(tx_desc_error)}, -}; - -static int ipqess_get_strset_count(struct net_device *netdev, int sset) -{ - switch (sset) { - case ETH_SS_STATS: - return ARRAY_SIZE(ipqess_stats); - default: - netdev_dbg(netdev, "%s: Invalid string set", __func__); - return -EOPNOTSUPP; - } -} - -static void ipqess_get_strings(struct net_device *netdev, uint32_t stringset, - uint8_t *data) -{ - uint8_t *p = data; - uint32_t i; - - switch (stringset) { - case ETH_SS_STATS: - for (i = 0; i < ARRAY_SIZE(ipqess_stats); i++) { - memcpy(p, ipqess_stats[i].string, - min((size_t)ETH_GSTRING_LEN, - strlen(ipqess_stats[i].string) + 1)); - p += ETH_GSTRING_LEN; - } - break; - } -} - -static void ipqess_get_ethtool_stats(struct net_device *netdev, - struct ethtool_stats *stats, - uint64_t *data) -{ - struct ipqess *ess = netdev_priv(netdev); - u32 *essstats = (u32 *)&ess->ipqessstats; - int i; - - spin_lock(&ess->stats_lock); - - ipqess_update_hw_stats(ess); - - for (i = 0; i < ARRAY_SIZE(ipqess_stats); i++) - data[i] = *(u32 *)(essstats + (ipqess_stats[i].offset / sizeof(u32))); - - spin_unlock(&ess->stats_lock); -} - -static void ipqess_get_drvinfo(struct net_device *dev, - struct ethtool_drvinfo *info) -{ - strlcpy(info->driver, "qca_ipqess", DRVINFO_LEN); - strlcpy(info->bus_info, "axi", ETHTOOL_BUSINFO_LEN); -} - -static int ipqess_get_settings(struct net_device *netdev, - struct ethtool_link_ksettings *cmd) -{ - struct ipqess *ess = netdev_priv(netdev); - - return phylink_ethtool_ksettings_get(ess->phylink, cmd); -} - -static int ipqess_set_settings(struct net_device *netdev, - const struct ethtool_link_ksettings *cmd) -{ - struct ipqess *ess = netdev_priv(netdev); - - return phylink_ethtool_ksettings_set(ess->phylink, cmd); -} - -static void ipqess_get_ringparam(struct net_device *netdev, - struct ethtool_ringparam *ring) -{ - ring->tx_max_pending = IPQESS_TX_RING_SIZE; - ring->rx_max_pending = IPQESS_RX_RING_SIZE; -} - -static const struct ethtool_ops ipqesstool_ops = { - .get_drvinfo = &ipqess_get_drvinfo, - .get_link = ðtool_op_get_link, - .get_link_ksettings = &ipqess_get_settings, - .set_link_ksettings = &ipqess_set_settings, - .get_strings = &ipqess_get_strings, - .get_sset_count = &ipqess_get_strset_count, - .get_ethtool_stats = &ipqess_get_ethtool_stats, - .get_ringparam = ipqess_get_ringparam, -}; - -void ipqess_set_ethtool_ops(struct net_device *netdev) -{ - netdev->ethtool_ops = &ipqesstool_ops; -} diff --git a/target/linux/ipq40xx/patches-5.15/100-dt-bindings-clock-qcom-ipq4019-add-missing-networkin.patch b/target/linux/ipq40xx/patches-5.15/100-dt-bindings-clock-qcom-ipq4019-add-missing-networkin.patch deleted file mode 100644 index ae59005bba..0000000000 --- a/target/linux/ipq40xx/patches-5.15/100-dt-bindings-clock-qcom-ipq4019-add-missing-networkin.patch +++ /dev/null @@ -1,27 +0,0 @@ -From 53cac0823f86c39eb4b00e2c9a7b2483a4182008 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 14 Aug 2023 12:37:58 +0200 -Subject: [PATCH 1/2] dt-bindings: clock: qcom: ipq4019: add missing networking - resets - -Add bindings for the missing networking resets found in IPQ4019 GCC. - -Signed-off-by: Robert Marko ---- - include/dt-bindings/clock/qcom,gcc-ipq4019.h | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/include/dt-bindings/clock/qcom,gcc-ipq4019.h -+++ b/include/dt-bindings/clock/qcom,gcc-ipq4019.h -@@ -165,5 +165,11 @@ - #define GCC_QDSS_BCR 69 - #define GCC_MPM_BCR 70 - #define GCC_SPDM_BCR 71 -+#define ESS_MAC1_ARES 72 -+#define ESS_MAC2_ARES 73 -+#define ESS_MAC3_ARES 74 -+#define ESS_MAC4_ARES 75 -+#define ESS_MAC5_ARES 76 -+#define ESS_PSGMII_ARES 77 - - #endif diff --git a/target/linux/ipq40xx/patches-5.15/101-clk-qcom-gcc-ipq4019-add-missing-networking-resets.patch b/target/linux/ipq40xx/patches-5.15/101-clk-qcom-gcc-ipq4019-add-missing-networking-resets.patch deleted file mode 100644 index 42a2f341be..0000000000 --- a/target/linux/ipq40xx/patches-5.15/101-clk-qcom-gcc-ipq4019-add-missing-networking-resets.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 6038ba75e2aa8e57d4eaf20a90c8061c43b1117f Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 14 Aug 2023 12:39:04 +0200 -Subject: [PATCH 2/2] clk: qcom: gcc-ipq4019: add missing networking resets - -IPQ4019 has more networking related resets that will be required for future -wired networking support, so lets add them. - -Signed-off-by: Robert Marko ---- - drivers/clk/qcom/gcc-ipq4019.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1707,6 +1707,12 @@ static const struct qcom_reset_map gcc_i - [GCC_TCSR_BCR] = {0x22000, 0}, - [GCC_MPM_BCR] = {0x24000, 0}, - [GCC_SPDM_BCR] = {0x25000, 0}, -+ [ESS_MAC1_ARES] = {0x1200C, 0}, -+ [ESS_MAC2_ARES] = {0x1200C, 1}, -+ [ESS_MAC3_ARES] = {0x1200C, 2}, -+ [ESS_MAC4_ARES] = {0x1200C, 3}, -+ [ESS_MAC5_ARES] = {0x1200C, 4}, -+ [ESS_PSGMII_ARES] = {0x1200C, 5}, - }; - - static const struct regmap_config gcc_ipq4019_regmap_config = { diff --git a/target/linux/ipq40xx/patches-5.15/104-clk-fix-apss-cpu-overclocking.patch b/target/linux/ipq40xx/patches-5.15/104-clk-fix-apss-cpu-overclocking.patch deleted file mode 100644 index 2de03f7ae0..0000000000 --- a/target/linux/ipq40xx/patches-5.15/104-clk-fix-apss-cpu-overclocking.patch +++ /dev/null @@ -1,115 +0,0 @@ -From f2b87dc1028b710ec8ce25808b9d21f92b376184 Mon Sep 17 00:00:00 2001 -From: Christian Lamparter -Date: Sun, 11 Mar 2018 14:41:31 +0100 -Subject: [PATCH 2/2] clk: fix apss cpu overclocking - -There's an interaction issue between the clk changes:" -clk: qcom: ipq4019: Add the apss cpu pll divider clock node -clk: qcom: ipq4019: remove fixed clocks and add pll clocks -" and the cpufreq-dt. - -cpufreq-dt is now spamming the kernel-log with the following: - -[ 1099.190658] cpu cpu0: dev_pm_opp_set_rate: failed to find current OPP -for freq 761142857 (-34) - -This only happens on certain devices like the Compex WPJ428 -and AVM FritzBox!4040. However, other devices like the Asus -RT-AC58U and Meraki MR33 work just fine. - -The issue stem from the fact that all higher CPU-Clocks -are achieved by switching the clock-parent to the P_DDRPLLAPSS -(ddrpllapss). Which is set by Qualcomm's proprietary bootcode -as part of the DDR calibration. - -For example, the FB4040 uses 256 MiB Nanya NT5CC128M16IP clocked -at round 533 MHz (ddrpllsdcc = 190285714 Hz). - -whereas the 128 MiB Nanya NT5CC64M16GP-DI in the ASUS RT-AC58U is -clocked at a slightly higher 537 MHz ( ddrpllsdcc = 192000000 Hz). - -This patch attempts to fix the issue by modifying -clk_cpu_div_round_rate(), clk_cpu_div_set_rate(), clk_cpu_div_recalc_rate() -to use a new qcom_find_freq_close() function, which returns the closest -matching frequency, instead of the next higher. This way, the SoC in -the FB4040 (with its max clock speed of 710.4 MHz) will no longer -try to overclock to 761 MHz. - -Fixes: d83dcacea18 ("clk: qcom: ipq4019: Add the apss cpu pll divider clock node") -Signed-off-by: Christian Lamparter -Signed-off-by: John Crispin ---- - drivers/clk/qcom/gcc-ipq4019.c | 34 +++++++++++++++++++++++++++++++--- - 1 file changed, 31 insertions(+), 3 deletions(-) - ---- a/drivers/clk/qcom/gcc-ipq4019.c -+++ b/drivers/clk/qcom/gcc-ipq4019.c -@@ -1243,6 +1243,29 @@ static const struct clk_fepll_vco gcc_fe - .reg = 0x2f020, - }; - -+ -+const struct freq_tbl *qcom_find_freq_close(const struct freq_tbl *f, -+ unsigned long rate) -+{ -+ const struct freq_tbl *last = NULL; -+ -+ for ( ; f->freq; f++) { -+ if (rate == f->freq) -+ return f; -+ -+ if (f->freq > rate) { -+ if (!last || -+ (f->freq - rate) < (rate - last->freq)) -+ return f; -+ else -+ return last; -+ } -+ last = f; -+ } -+ -+ return last; -+} -+ - /* - * Round rate function for APSS CPU PLL Clock divider. - * It looks up the frequency table and returns the next higher frequency -@@ -1255,7 +1278,7 @@ static long clk_cpu_div_round_rate(struc - struct clk_hw *p_hw; - const struct freq_tbl *f; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1277,7 +1300,7 @@ static int clk_cpu_div_set_rate(struct c - const struct freq_tbl *f; - u32 mask; - -- f = qcom_find_freq(pll->freq_tbl, rate); -+ f = qcom_find_freq_close(pll->freq_tbl, rate); - if (!f) - return -EINVAL; - -@@ -1304,6 +1327,7 @@ static unsigned long - clk_cpu_div_recalc_rate(struct clk_hw *hw, - unsigned long parent_rate) - { -+ const struct freq_tbl *f; - struct clk_fepll *pll = to_clk_fepll(hw); - u32 cdiv, pre_div; - u64 rate; -@@ -1324,7 +1348,11 @@ clk_cpu_div_recalc_rate(struct clk_hw *h - rate = clk_fepll_vco_calc_rate(pll, parent_rate) * 2; - do_div(rate, pre_div); - -- return rate; -+ f = qcom_find_freq_close(pll->freq_tbl, rate); -+ if (!f) -+ return rate; -+ -+ return f->freq; - }; - - static const struct clk_ops clk_regmap_cpu_div_ops = { diff --git a/target/linux/ipq40xx/patches-5.15/301-arm-compressed-add-appended-DTB-section.patch b/target/linux/ipq40xx/patches-5.15/301-arm-compressed-add-appended-DTB-section.patch deleted file mode 100644 index 0448574e7e..0000000000 --- a/target/linux/ipq40xx/patches-5.15/301-arm-compressed-add-appended-DTB-section.patch +++ /dev/null @@ -1,48 +0,0 @@ -From 0843a61d6913bdac8889eb048ed89f7903059787 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 30 Oct 2020 13:36:31 +0100 -Subject: [PATCH] arm: compressed: add appended DTB section - -This adds a appended_dtb section to the ARM decompressor -linker script. - -This allows using the existing ARM zImage appended DTB support for -appending a DTB to the raw ELF kernel. - -Its size is set to 1MB max to match the zImage appended DTB size limit. - -To use it to pass the DTB to the kernel, objcopy is used: - -objcopy --set-section-flags=.appended_dtb=alloc,contents \ - --update-section=.appended_dtb=.dtb vmlinux - -This is based off the following patch: -https://github.com/openwrt/openwrt/commit/c063e27e02a9dcac0e7f5877fb154e58fa3e1a69 - -Signed-off-by: Robert Marko ---- - arch/arm/boot/compressed/vmlinux.lds.S | 9 ++++++++- - 1 file changed, 8 insertions(+), 1 deletion(-) - ---- a/arch/arm/boot/compressed/vmlinux.lds.S -+++ b/arch/arm/boot/compressed/vmlinux.lds.S -@@ -103,6 +103,13 @@ SECTIONS - - _edata = .; - -+ .appended_dtb : { -+ /* leave space for appended DTB */ -+ . += 0x100000; -+ } -+ -+ _edata_dtb = .; -+ - /* - * The image_end section appears after any additional loadable sections - * that the linker may decide to insert in the binary image. Having -@@ -140,4 +147,4 @@ SECTIONS - - ARM_ASSERTS - } --ASSERT(_edata_real == _edata, "error: zImage file size is incorrect"); -+ASSERT(_edata_real == _edata_dtb, "error: zImage file size is incorrect"); diff --git a/target/linux/ipq40xx/patches-5.15/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch b/target/linux/ipq40xx/patches-5.15/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch deleted file mode 100644 index 51891c1f22..0000000000 --- a/target/linux/ipq40xx/patches-5.15/302-arm-compressed-set-ipq40xx-watchdog-to-allow-boot.patch +++ /dev/null @@ -1,66 +0,0 @@ -From 11d6a6128a5a07c429941afc202b6e62a19771be Mon Sep 17 00:00:00 2001 -From: John Thomson -Date: Fri, 23 Oct 2020 19:42:36 +1000 -Subject: [PATCH 2/2] arm: compressed: set ipq40xx watchdog to allow boot - -For IPQ40XX systems where the SoC watchdog is activated before linux, -the watchdog timer may be too small for linux to finish uncompress, -boot, and watchdog management start. -If the watchdog is enabled, set the timeout for it to 30 seconds. -The functionality and offsets were copied from: -drivers/watchdog/qcom-wdt.c qcom_wdt_set_timeout & qcom_wdt_start -The watchdog memory address was taken from: -arch/arm/boot/dts/qcom-ipq4019.dtsi - -This was required on Mikrotik IPQ40XX consumer hardware using Mikrotik's -RouterBoot bootloader. - -Signed-off-by: John Thomson ---- - arch/arm/boot/compressed/head.S | 35 +++++++++++++++++++++++++++++++++ - 1 file changed, 35 insertions(+) - ---- a/arch/arm/boot/compressed/head.S -+++ b/arch/arm/boot/compressed/head.S -@@ -624,6 +624,41 @@ not_relocated: mov r0, #0 - bic r4, r4, #1 - blne cache_on - -+/* Set the Qualcom IPQ40xx watchdog timeout to 30 seconds -+ * if it is enabled, so that there is time for kernel -+ * to decompress, boot, and take over the watchdog. -+ * data and functionality from drivers/watchdog/qcom-wdt.c -+ * address from arch/arm/boot/dts/qcom-ipq4019.dtsi -+ */ -+#ifdef CONFIG_ARCH_IPQ40XX -+watchdog_set: -+ /* offsets: -+ * 0x04 reset (=1 resets countdown) -+ * 0x08 enable (=0 disables) -+ * 0x0c status (=1 when SoC was reset by watchdog) -+ * 0x10 bark (=timeout warning in ticks) -+ * 0x14 bite (=timeout reset in ticks) -+ * clock rate is 1<<15 hertz -+ */ -+ .equ watchdog, 0x0b017000 @Store watchdog base address -+ movw r0, #:lower16:watchdog -+ movt r0, #:upper16:watchdog -+ ldr r1, [r0, #0x08] @Get enabled? -+ cmp r1, #1 @If not enabled, do not change -+ bne watchdog_finished -+ mov r1, #0 -+ str r1, [r0, #0x08] @Disable the watchdog -+ mov r1, #1 -+ str r1, [r0, #0x04] @Pet the watchdog -+ mov r1, #30 @30 seconds timeout -+ lsl r1, r1, #15 @converted to ticks -+ str r1, [r0, #0x10] @Set the bark timeout -+ str r1, [r0, #0x14] @Set the bite timeout -+ mov r1, #1 -+ str r1, [r0, #0x08] @Enable the watchdog -+watchdog_finished: -+#endif /* CONFIG_ARCH_IPQ40XX */ -+ - /* - * The C runtime environment should now be setup sufficiently. - * Set up some pointers, and start decompressing. diff --git a/target/linux/ipq40xx/patches-5.15/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch b/target/linux/ipq40xx/patches-5.15/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch deleted file mode 100644 index 3a3be91709..0000000000 --- a/target/linux/ipq40xx/patches-5.15/400-mmc-sdhci-sdhci-msm-use-sdhci_set_clock-instead-of-s.patch +++ /dev/null @@ -1,24 +0,0 @@ -From f63ea127643a605da97090ce585fdd7c2d17fa42 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 14 Dec 2020 13:35:35 +0100 -Subject: [PATCH] mmc: sdhci-msm: use sdhci_set_clock - -When using sdhci_msm_set_clock clock setting will fail, so lets -use the generic sdhci_set_clock. - -Signed-off-by: Robert Marko ---- - drivers/mmc/host/sdhci-msm.c | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/mmc/host/sdhci-msm.c -+++ b/drivers/mmc/host/sdhci-msm.c -@@ -2447,7 +2447,7 @@ MODULE_DEVICE_TABLE(of, sdhci_msm_dt_mat - - static const struct sdhci_ops sdhci_msm_ops = { - .reset = sdhci_msm_reset, -- .set_clock = sdhci_msm_set_clock, -+ .set_clock = sdhci_set_clock, - .get_min_clock = sdhci_msm_get_min_clock, - .get_max_clock = sdhci_msm_get_max_clock, - .set_bus_width = sdhci_set_bus_width, diff --git a/target/linux/ipq40xx/patches-5.15/401-mmc-sdhci-msm-comment-unused-sdhci_msm_set_clock.patch b/target/linux/ipq40xx/patches-5.15/401-mmc-sdhci-msm-comment-unused-sdhci_msm_set_clock.patch deleted file mode 100644 index b297600171..0000000000 --- a/target/linux/ipq40xx/patches-5.15/401-mmc-sdhci-msm-comment-unused-sdhci_msm_set_clock.patch +++ /dev/null @@ -1,108 +0,0 @@ -From 28edd829133766eb3cefaf2e49d3ee701968061b Mon Sep 17 00:00:00 2001 -From: Christian Marangi -Date: Tue, 9 May 2023 01:57:17 +0200 -Subject: [PATCH] mmc: sdhci-msm: comment unused sdhci_msm_set_clock - -comment unused sdhci_msm_set_clock and __sdhci_msm_set_clock as due to some -current problem, we are forced to use sdhci_set_clock. - -Signed-off-by: Christian Marangi ---- - drivers/mmc/host/sdhci-msm.c | 86 ++++++++++++++++++------------------ - 1 file changed, 43 insertions(+), 43 deletions(-) - ---- a/drivers/mmc/host/sdhci-msm.c -+++ b/drivers/mmc/host/sdhci-msm.c -@@ -1751,49 +1751,49 @@ static unsigned int sdhci_msm_get_min_cl - return SDHCI_MSM_MIN_CLOCK; - } - --/* -- * __sdhci_msm_set_clock - sdhci_msm clock control. -- * -- * Description: -- * MSM controller does not use internal divider and -- * instead directly control the GCC clock as per -- * HW recommendation. -- **/ --static void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) --{ -- u16 clk; -- -- sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); -- -- if (clock == 0) -- return; -- -- /* -- * MSM controller do not use clock divider. -- * Thus read SDHCI_CLOCK_CONTROL and only enable -- * clock with no divider value programmed. -- */ -- clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); -- sdhci_enable_clk(host, clk); --} -- --/* sdhci_msm_set_clock - Called with (host->lock) spinlock held. */ --static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) --{ -- struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); -- struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); -- -- if (!clock) { -- host->mmc->actual_clock = msm_host->clk_rate = 0; -- goto out; -- } -- -- sdhci_msm_hc_select_mode(host); -- -- msm_set_clock_rate_for_bus_mode(host, clock); --out: -- __sdhci_msm_set_clock(host, clock); --} -+// /* -+// * __sdhci_msm_set_clock - sdhci_msm clock control. -+// * -+// * Description: -+// * MSM controller does not use internal divider and -+// * instead directly control the GCC clock as per -+// * HW recommendation. -+// **/ -+// static void __sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) -+// { -+// u16 clk; -+ -+// sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL); -+ -+// if (clock == 0) -+// return; -+ -+// /* -+// * MSM controller do not use clock divider. -+// * Thus read SDHCI_CLOCK_CONTROL and only enable -+// * clock with no divider value programmed. -+// */ -+// clk = sdhci_readw(host, SDHCI_CLOCK_CONTROL); -+// sdhci_enable_clk(host, clk); -+// } -+ -+// /* sdhci_msm_set_clock - Called with (host->lock) spinlock held. */ -+// static void sdhci_msm_set_clock(struct sdhci_host *host, unsigned int clock) -+// { -+// struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host); -+// struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host); -+ -+// if (!clock) { -+// host->mmc->actual_clock = msm_host->clk_rate = 0; -+// goto out; -+// } -+ -+// sdhci_msm_hc_select_mode(host); -+ -+// msm_set_clock_rate_for_bus_mode(host, clock); -+// out: -+// __sdhci_msm_set_clock(host, clock); -+// } - - /*****************************************************************************\ - * * diff --git a/target/linux/ipq40xx/patches-5.15/420-firmware-qcom-scm-Add-SDI-disable-support.patch b/target/linux/ipq40xx/patches-5.15/420-firmware-qcom-scm-Add-SDI-disable-support.patch deleted file mode 100644 index e4ee745ff1..0000000000 --- a/target/linux/ipq40xx/patches-5.15/420-firmware-qcom-scm-Add-SDI-disable-support.patch +++ /dev/null @@ -1,60 +0,0 @@ -From b514bc3c0a5a57bc83843dc66c72788b9c9435ac Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 18 May 2023 16:02:23 +0200 -Subject: [PATCH 1/3] firmware: qcom: scm: Add SDI disable support - -Some SoC-s like IPQ5018 require SDI(Secure Debug Image) to be disabled -before trying to reboot, otherwise board will just hang after reboot has -been issued via PSCI. - -So, provide a call to SCM that allows disabling it. - -Signed-off-by: Robert Marko -Acked-by: Mukesh Ojha ---- - drivers/firmware/qcom_scm.c | 23 +++++++++++++++++++++++ - drivers/firmware/qcom_scm.h | 1 + - 2 files changed, 24 insertions(+) - ---- a/drivers/firmware/qcom_scm.c -+++ b/drivers/firmware/qcom_scm.c -@@ -389,6 +389,29 @@ int qcom_scm_set_remote_state(u32 state, - } - EXPORT_SYMBOL(qcom_scm_set_remote_state); - -+static int qcom_scm_disable_sdi(void) -+{ -+ int ret; -+ struct qcom_scm_desc desc = { -+ .svc = QCOM_SCM_SVC_BOOT, -+ .cmd = QCOM_SCM_BOOT_SDI_CONFIG, -+ .args[0] = 1, /* Disable watchdog debug */ -+ .args[1] = 0, /* Disable SDI */ -+ .arginfo = QCOM_SCM_ARGS(2), -+ .owner = ARM_SMCCC_OWNER_SIP, -+ }; -+ struct qcom_scm_res res; -+ -+ ret = qcom_scm_clk_enable(); -+ if (ret) -+ return ret; -+ ret = qcom_scm_call(__scm->dev, &desc, &res); -+ -+ qcom_scm_clk_disable(); -+ -+ return ret ? : res.result[0]; -+} -+ - static int __qcom_scm_set_dload_mode(struct device *dev, bool enable) - { - struct qcom_scm_desc desc = { ---- a/drivers/firmware/qcom_scm.h -+++ b/drivers/firmware/qcom_scm.h -@@ -77,6 +77,7 @@ extern int scm_legacy_call(struct device - #define QCOM_SCM_SVC_BOOT 0x01 - #define QCOM_SCM_BOOT_SET_ADDR 0x01 - #define QCOM_SCM_BOOT_TERMINATE_PC 0x02 -+#define QCOM_SCM_BOOT_SDI_CONFIG 0x09 - #define QCOM_SCM_BOOT_SET_DLOAD_MODE 0x10 - #define QCOM_SCM_BOOT_SET_REMOTE_STATE 0x0a - #define QCOM_SCM_FLUSH_FLAG_MASK 0x3 diff --git a/target/linux/ipq40xx/patches-5.15/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch b/target/linux/ipq40xx/patches-5.15/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch deleted file mode 100644 index 98f02934a9..0000000000 --- a/target/linux/ipq40xx/patches-5.15/421-firmware-qcom-scm-disable-SDI-on-Google-WiFi.patch +++ /dev/null @@ -1,34 +0,0 @@ -From a658ad57c2b9d46eb5395c7bb8cf83b8e0f289e7 Mon Sep 17 00:00:00 2001 -From: Brian Norris -Date: Fri, 28 Jul 2023 12:02:19 +0200 -Subject: [PATCH 2/3] firmware: qcom: scm: disable SDI on Google WiFi - -Google WiFi seems to have SDI (Secure Debug Image) enabled by default which -prevents normal reboot from working causing the board to just hang after -reboot is called. - -So lets disable SDI during SCM probe on Google WiFi boards in order to -avoid a state where WDT will kick in and then the board will just hang -in the debug mode. - -Signed-off-by: Brian Norris ---- - drivers/firmware/qcom_scm.c | 7 +++++++ - 1 file changed, 7 insertions(+) - ---- a/drivers/firmware/qcom_scm.c -+++ b/drivers/firmware/qcom_scm.c -@@ -1337,6 +1337,13 @@ static int qcom_scm_probe(struct platfor - if (download_mode) - qcom_scm_set_download_mode(true); - -+ /* -+ * Factory firmware leaves SDI (a debug interface), which prevents -+ * clean reboot. -+ */ -+ if (of_machine_is_compatible("google,wifi")) -+ qcom_scm_disable_sdi(); -+ - return 0; - } - diff --git a/target/linux/ipq40xx/patches-5.15/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch b/target/linux/ipq40xx/patches-5.15/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch deleted file mode 100644 index a31ea69e89..0000000000 --- a/target/linux/ipq40xx/patches-5.15/422-firmware-qcom-scm-fix-SCM-cold-boot-address.patch +++ /dev/null @@ -1,138 +0,0 @@ -From aaa675f07e781e248fcf169ce9a917b48bc2cc9b Mon Sep 17 00:00:00 2001 -From: Brian Norris -Date: Fri, 28 Jul 2023 12:06:23 +0200 -Subject: [PATCH 3/3] firmware: qcom: scm: fix SCM cold boot address - -This effectively reverts upstream Linux commit 13e77747800e ("firmware: -qcom: scm: Use atomic SCM for cold boot"), because Google WiFi boot -firmwares don't support the atomic variant. - -This fixes SMP support for Google WiFi. - -Signed-off-by: Brian Norris ---- - drivers/firmware/qcom_scm-legacy.c | 62 +++++++++++++++++++++++++----- - drivers/firmware/qcom_scm.c | 11 ++++++ - 2 files changed, 63 insertions(+), 10 deletions(-) - ---- a/drivers/firmware/qcom_scm-legacy.c -+++ b/drivers/firmware/qcom_scm-legacy.c -@@ -13,6 +13,9 @@ - #include - #include - -+#include -+#include -+ - #include "qcom_scm.h" - - static DEFINE_MUTEX(qcom_scm_lock); -@@ -117,6 +120,25 @@ static void __scm_legacy_do(const struct - } while (res->a0 == QCOM_SCM_INTERRUPTED); - } - -+static void qcom_scm_inv_range(unsigned long start, unsigned long end) -+{ -+ u32 cacheline_size, ctr; -+ -+ asm volatile("mrc p15, 0, %0, c0, c0, 1" : "=r" (ctr)); -+ cacheline_size = 4 << ((ctr >> 16) & 0xf); -+ -+ start = round_down(start, cacheline_size); -+ end = round_up(end, cacheline_size); -+ outer_inv_range(start, end); -+ while (start < end) { -+ asm ("mcr p15, 0, %0, c7, c6, 1" : : "r" (start) -+ : "memory"); -+ start += cacheline_size; -+ } -+ dsb(); -+ isb(); -+} -+ - /** - * scm_legacy_call() - Sends a command to the SCM and waits for the command to - * finish processing. -@@ -160,10 +182,16 @@ int scm_legacy_call(struct device *dev, - - rsp = scm_legacy_command_to_response(cmd); - -- cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE); -- if (dma_mapping_error(dev, cmd_phys)) { -- kfree(cmd); -- return -ENOMEM; -+ if (dev) { -+ cmd_phys = dma_map_single(dev, cmd, alloc_len, DMA_TO_DEVICE); -+ if (dma_mapping_error(dev, cmd_phys)) { -+ kfree(cmd); -+ return -ENOMEM; -+ } -+ } else { -+ cmd_phys = virt_to_phys(cmd); -+ __cpuc_flush_dcache_area(cmd, alloc_len); -+ outer_flush_range(cmd_phys, cmd_phys + alloc_len); - } - - smc.args[0] = 1; -@@ -179,13 +207,26 @@ int scm_legacy_call(struct device *dev, - goto out; - - do { -- dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len, -- sizeof(*rsp), DMA_FROM_DEVICE); -+ if (dev) { -+ dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + -+ cmd_len, sizeof(*rsp), -+ DMA_FROM_DEVICE); -+ } else { -+ unsigned long start = (uintptr_t)cmd + sizeof(*cmd) + -+ cmd_len; -+ qcom_scm_inv_range(start, start + sizeof(*rsp)); -+ } - } while (!rsp->is_complete); - -- dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len + -- le32_to_cpu(rsp->buf_offset), -- resp_len, DMA_FROM_DEVICE); -+ if (dev) { -+ dma_sync_single_for_cpu(dev, cmd_phys + sizeof(*cmd) + cmd_len + -+ le32_to_cpu(rsp->buf_offset), -+ resp_len, DMA_FROM_DEVICE); -+ } else { -+ unsigned long start = (uintptr_t)cmd + sizeof(*cmd) + cmd_len + -+ le32_to_cpu(rsp->buf_offset); -+ qcom_scm_inv_range(start, start + resp_len); -+ } - - if (res) { - res_buf = scm_legacy_get_response_buffer(rsp); -@@ -193,7 +234,8 @@ int scm_legacy_call(struct device *dev, - res->result[i] = le32_to_cpu(res_buf[i]); - } - out: -- dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE); -+ if (dev) -+ dma_unmap_single(dev, cmd_phys, alloc_len, DMA_TO_DEVICE); - kfree(cmd); - return ret; - } ---- a/drivers/firmware/qcom_scm.c -+++ b/drivers/firmware/qcom_scm.c -@@ -344,6 +344,17 @@ int qcom_scm_set_cold_boot_addr(void *en - desc.args[0] = flags; - desc.args[1] = virt_to_phys(entry); - -+ /* -+ * Factory firmware doesn't support the atomic variant. Non-atomic SCMs -+ * require ugly DMA invalidation support that was dropped upstream a -+ * while ago. For more info, see: -+ * -+ * [RFC] qcom_scm: IPQ4019 firmware does not support atomic API? -+ * https://lore.kernel.org/linux-arm-msm/20200913201608.GA3162100@bDebian/ -+ */ -+ if (of_machine_is_compatible("google,wifi")) -+ return qcom_scm_call(__scm ? __scm->dev : NULL, &desc, NULL); -+ - return qcom_scm_call_atomic(__scm ? __scm->dev : NULL, &desc, NULL); - } - EXPORT_SYMBOL(qcom_scm_set_cold_boot_addr); diff --git a/target/linux/ipq40xx/patches-5.15/444-mtd-nand-rawnand-add-support-for-Toshiba-TC58NVG0S3H.patch b/target/linux/ipq40xx/patches-5.15/444-mtd-nand-rawnand-add-support-for-Toshiba-TC58NVG0S3H.patch deleted file mode 100644 index 91919b2894..0000000000 --- a/target/linux/ipq40xx/patches-5.15/444-mtd-nand-rawnand-add-support-for-Toshiba-TC58NVG0S3H.patch +++ /dev/null @@ -1,29 +0,0 @@ -From 35ca7e3e6ccd120d694a3425f37fc6374ad2e11e Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Andreas=20B=C3=B6hler?= -Date: Wed, 20 Apr 2022 12:08:38 +0200 -Subject: [PATCH] mtd: rawnand: add support for Toshiba TC58NVG0S3HTA00 - NAND flash -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -The Toshiba TC58NVG0S3HTA00 is detected with 64 byte OOB while the flash -has 128 bytes OOB. This adds a static NAND ID entry to correct this. - -Tested on FRITZ!Box 7530 flashed with OpenWrt. - -Signed-off-by: Andreas Böhler -(changed id_len to 8, added comment about possible counterfeits) ---- ---- a/drivers/mtd/nand/raw/nand_ids.c -+++ b/drivers/mtd/nand/raw/nand_ids.c -@@ -29,6 +29,9 @@ struct nand_flash_dev nand_flash_ids[] = - {"TC58NVG0S3E 1G 3.3V 8-bit", - { .id = {0x98, 0xd1, 0x90, 0x15, 0x76, 0x14, 0x01, 0x00} }, - SZ_2K, SZ_128, SZ_128K, 0, 8, 64, NAND_ECC_INFO(1, SZ_512), }, -+ {"TC58NVG0S3HTA00 1G 3.3V 8-bit", /* possibly counterfeit chip - see commit */ -+ { .id = {0x98, 0xf1, 0x80, 0x15} }, /* should be more bytes */ -+ SZ_2K, SZ_128, SZ_128K, 0, 8, 128, NAND_ECC_INFO(8, SZ_512), }, - {"TC58NVG2S0F 4G 3.3V 8-bit", - { .id = {0x98, 0xdc, 0x90, 0x26, 0x76, 0x15, 0x01, 0x08} }, - SZ_4K, SZ_512, SZ_256K, 0, 8, 224, NAND_ECC_INFO(4, SZ_512) }, diff --git a/target/linux/ipq40xx/patches-5.15/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch b/target/linux/ipq40xx/patches-5.15/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch deleted file mode 100644 index 385364c076..0000000000 --- a/target/linux/ipq40xx/patches-5.15/700-skbuff-add-DSA-specific-data-to-struct-skb_shared_in.patch +++ /dev/null @@ -1,43 +0,0 @@ -From da75807ac41175e9db8c95f7a172b4133763b744 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Mon, 11 Jan 2021 17:49:36 +0100 -Subject: [PATCH] skbuff: add DSA specific data to struct skb_shared_info - -All of the already existing DSA tagging protocol drivers -are storing the tagging data directly into the skb. In most -cases that is the only way to send the required information -to the underlying ethernet switch. - -However on certain platforms (like the Qualcomm IPQ40xx -SoCs) the built-in ethernet switch is connected directly -to an ethernet MAC, and the tagging information must be -sent out-of-band which is done directly via the hardware -TX descriptors of the ethernet MAC. - -In such cases, putting the information into the skb causes -unneccesary overhead, because the ethernet driver must -remove that before sending the ethernet frame towards to -the hardware. - -This change adds two new DSA specific fields to struct -skb_shared_info which makes it possible to send the -tagging information via skb->shinfo. With this approach, -the twofold modifications of the skb data can be avoided. - -Signed-off-by: Gabor Juhos ---- - include/linux/skbuff.h | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/include/linux/skbuff.h -+++ b/include/linux/skbuff.h -@@ -564,6 +564,9 @@ struct skb_shared_info { - unsigned int gso_type; - u32 tskey; - -+ unsigned int dsa_tag_proto; -+ unsigned char dsa_tag_data[8]; -+ - /* - * Warning : all fields before dataref are cleared in __alloc_skb() - */ diff --git a/target/linux/ipq40xx/patches-5.15/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch b/target/linux/ipq40xx/patches-5.15/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch deleted file mode 100644 index 74079d68a1..0000000000 --- a/target/linux/ipq40xx/patches-5.15/701-net-dsa-tag_ipq4019-add-shinfo-based-tagging-driver-.patch +++ /dev/null @@ -1,187 +0,0 @@ -From 29a0c2fae991cab142575c92276c0afdeb260ebe Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Thu, 28 Oct 2021 21:44:52 +0200 -Subject: [PATCH] net: dsa: tag_ipq4019: add shinfo based tagging driver for - IPQ40xx - -This change adds a tagging protocol driver for the built-in -ethernet switch of the Qualcomm Atheros IPQ4019 SoCs. - -In comparison to the existing tagging protocols this hardware -requires a slightly different approach because the switch does -not use in-band tags. - -On the receive path, the source port information is embedded -into the RX descriptors of the ethernet MAC hardware. Similarly, -the destination port mask must be sent via the TX descriptors -of the ethernet MAC when a packet is sent towards the switch. - -In order to support this special requirements, this patch -adds a new tagging protocol driver. - -The driver extracts the source port information directly -from the 'receive return descriptor' of the ethernet MAC. -It is possible because that descriptor is part of the skb -received from the ethernet driver. - -Unfortunatley, it is not possible to put the destination -port information directly to the TX descriptors, because -those are handled internally by the driver of the ethernet -hardware. - -To overcome this limitation, this tagging driver uses the -DSA specific fields in skb->shinfo to send the destination -port information to the ethernet driver. - -A similar tagging driver is exist but that uses skb -extensions which causes unnecessary overhead. - -Signed-off-by: Gabor Juhos ---- - include/linux/dsa/ipq4019.h | 11 ++++++ - include/net/dsa.h | 2 + - net/dsa/Kconfig | 6 +++ - net/dsa/Makefile | 1 + - net/dsa/tag_ipq4019.c | 79 +++++++++++++++++++++++++++++++++++++ - 5 files changed, 99 insertions(+) - create mode 100644 include/linux/dsa/ipq4019.h - create mode 100644 net/dsa/tag_ipq4019.c - ---- /dev/null -+++ b/include/linux/dsa/ipq4019.h -@@ -0,0 +1,11 @@ -+/* SPDX-License-Identifier: GPL-2.0-only */ -+ -+#ifndef DSA_IPQ40XX_H -+#define DSA_IPQ40XX_H -+ -+struct ipq40xx_dsa_tag_data { -+ u8 from_cpu; -+ u8 dp; -+}; -+ -+#endif /* DSA_IPQ40XX_H */ ---- a/include/net/dsa.h -+++ b/include/net/dsa.h -@@ -51,6 +51,7 @@ struct phylink_link_state; - #define DSA_TAG_PROTO_SEVILLE_VALUE 21 - #define DSA_TAG_PROTO_BRCM_LEGACY_VALUE 22 - #define DSA_TAG_PROTO_SJA1110_VALUE 23 -+#define DSA_TAG_PROTO_IPQ4019_VALUE 24 - - enum dsa_tag_protocol { - DSA_TAG_PROTO_NONE = DSA_TAG_PROTO_NONE_VALUE, -@@ -77,6 +78,7 @@ enum dsa_tag_protocol { - DSA_TAG_PROTO_OCELOT_8021Q = DSA_TAG_PROTO_OCELOT_8021Q_VALUE, - DSA_TAG_PROTO_SEVILLE = DSA_TAG_PROTO_SEVILLE_VALUE, - DSA_TAG_PROTO_SJA1110 = DSA_TAG_PROTO_SJA1110_VALUE, -+ DSA_TAG_PROTO_IPQ4019 = DSA_TAG_PROTO_IPQ4019_VALUE, - }; - - struct dsa_switch; ---- a/net/dsa/Kconfig -+++ b/net/dsa/Kconfig -@@ -57,6 +57,12 @@ config NET_DSA_TAG_HELLCREEK - Say Y or M if you want to enable support for tagging frames - for the Hirschmann Hellcreek TSN switches. - -+config NET_DSA_TAG_IPQ4019 -+ tristate "Tag driver for Qualcomm Atheros IPQ4019 SoC built-in switch" -+ help -+ Say Y or M if you want to enable support for tagging frames for -+ the built-in switch of the Qualcomm Atheros IPQ4019 SoC-s. -+ - config NET_DSA_TAG_GSWIP - tristate "Tag driver for Lantiq / Intel GSWIP switches" - help ---- a/net/dsa/Makefile -+++ b/net/dsa/Makefile -@@ -8,6 +8,7 @@ obj-$(CONFIG_NET_DSA_TAG_AR9331) += tag_ - obj-$(CONFIG_NET_DSA_TAG_BRCM_COMMON) += tag_brcm.o - obj-$(CONFIG_NET_DSA_TAG_DSA_COMMON) += tag_dsa.o - obj-$(CONFIG_NET_DSA_TAG_GSWIP) += tag_gswip.o -+obj-$(CONFIG_NET_DSA_TAG_IPQ4019) += tag_ipq4019.o - obj-$(CONFIG_NET_DSA_TAG_HELLCREEK) += tag_hellcreek.o - obj-$(CONFIG_NET_DSA_TAG_KSZ) += tag_ksz.o - obj-$(CONFIG_NET_DSA_TAG_RTL4_A) += tag_rtl4_a.o ---- /dev/null -+++ b/net/dsa/tag_ipq4019.c -@@ -0,0 +1,78 @@ -+// SPDX-License-Identifier: GPL-2.0-only -+ -+/* Copyright (c) 2021, Gabor Juhos */ -+ -+#include -+#include -+ -+#include "dsa_priv.h" -+ -+/* Receive Return Descriptor */ -+struct edma_rrd { -+ u16 rrd0; -+ u16 rrd1; -+ u16 rrd2; -+ u16 rrd3; -+ u16 rrd4; -+ u16 rrd5; -+ u16 rrd6; -+ u16 rrd7; -+} __packed; -+ -+#define EDMA_RRD_SIZE sizeof(struct edma_rrd) -+ -+#define EDMA_RRD1_PORT_ID_MASK GENMASK(14, 12) -+ -+static struct sk_buff *ipq4019_sh_tag_xmit(struct sk_buff *skb, -+ struct net_device *dev) -+{ -+ struct dsa_port *dp = dsa_slave_to_port(dev); -+ struct ipq40xx_dsa_tag_data *tag_data; -+ -+ BUILD_BUG_ON(sizeof_field(struct skb_shared_info, dsa_tag_data) < -+ sizeof(struct ipq40xx_dsa_tag_data)); -+ -+ skb_shinfo(skb)->dsa_tag_proto = DSA_TAG_PROTO_IPQ4019; -+ tag_data = (struct ipq40xx_dsa_tag_data *)skb_shinfo(skb)->dsa_tag_data; -+ -+ tag_data->from_cpu = 1; -+ /* set the destination port information */ -+ tag_data->dp = BIT(dp->index); -+ -+ return skb; -+} -+ -+static struct sk_buff *ipq4019_sh_tag_rcv(struct sk_buff *skb, -+ struct net_device *dev) -+{ -+ struct edma_rrd *rrd; -+ int offset; -+ int port; -+ -+ offset = EDMA_RRD_SIZE + ETH_HLEN; -+ if (unlikely(skb_headroom(skb) < offset)) -+ return NULL; -+ -+ rrd = (struct edma_rrd *)(skb->data - offset); -+ port = FIELD_GET(EDMA_RRD1_PORT_ID_MASK, rrd->rrd1); -+ -+ skb->dev = dsa_master_find_slave(dev, 0, port); -+ if (!skb->dev) -+ return NULL; -+ -+ return skb; -+} -+ -+const struct dsa_device_ops ipq4019_sh_tag_dsa_ops = { -+ .name = "ipq4019-sh", -+ .proto = DSA_TAG_PROTO_IPQ4019, -+ .xmit = ipq4019_sh_tag_xmit, -+ .rcv = ipq4019_sh_tag_rcv, -+}; -+ -+MODULE_LICENSE("GPL v2"); -+MODULE_DESCRIPTION("DSA tag driver for the IPQ4019 SoC built-in ethernet switch"); -+MODULE_AUTHOR("Gabor Juhos "); -+MODULE_ALIAS_DSA_TAG_DRIVER(DSA_TAG_PROTO_IPQ4019); -+ -+module_dsa_tag_driver(ipq4019_sh_tag_dsa_ops); diff --git a/target/linux/ipq40xx/patches-5.15/702-net-ethernet-qualcomm-add-IPQESS-support.patch b/target/linux/ipq40xx/patches-5.15/702-net-ethernet-qualcomm-add-IPQESS-support.patch deleted file mode 100644 index 72e9345118..0000000000 --- a/target/linux/ipq40xx/patches-5.15/702-net-ethernet-qualcomm-add-IPQESS-support.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 4f488235f498db43f2412116dea6e02c7fb20216 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 1 Nov 2021 12:36:51 +0100 -Subject: [PATCH] net: ethernet: qualcomm: add IPQESS support - -Allow compiling the IPQESS driver that supports the -Qualcomm IPQ40xx SoC built-in ethernet controller. - -Signed-off-by: Robert Marko ---- - drivers/net/ethernet/qualcomm/Kconfig | 11 +++++++++++ - drivers/net/ethernet/qualcomm/Makefile | 1 + - 2 files changed, 12 insertions(+) - ---- a/drivers/net/ethernet/qualcomm/Kconfig -+++ b/drivers/net/ethernet/qualcomm/Kconfig -@@ -60,6 +60,17 @@ config QCOM_EMAC - low power, Receive-Side Scaling (RSS), and IEEE 1588-2008 - Precision Clock Synchronization Protocol. - -+config QCOM_IPQ4019_ESS_EDMA -+ tristate "Qualcomm Atheros IPQ4019 ESS EDMA support" -+ depends on OF -+ select PHYLINK -+ help -+ This driver supports the Qualcomm Atheros IPQ40xx built-in -+ ESS EDMA ethernet controller. -+ -+ To compile this driver as a module, choose M here: the -+ module will be called ipqess. -+ - source "drivers/net/ethernet/qualcomm/rmnet/Kconfig" - - endif # NET_VENDOR_QUALCOMM ---- a/drivers/net/ethernet/qualcomm/Makefile -+++ b/drivers/net/ethernet/qualcomm/Makefile -@@ -10,5 +10,6 @@ obj-$(CONFIG_QCA7000_UART) += qcauart.o - qcauart-objs := qca_uart.o - - obj-y += emac/ -+obj-y += ipqess/ - - obj-$(CONFIG_RMNET) += rmnet/ diff --git a/target/linux/ipq40xx/patches-5.15/703-arm-dts-ipq4019-add-ethernet-controller-DT-node.patch b/target/linux/ipq40xx/patches-5.15/703-arm-dts-ipq4019-add-ethernet-controller-DT-node.patch deleted file mode 100644 index 68fb4eb4ce..0000000000 --- a/target/linux/ipq40xx/patches-5.15/703-arm-dts-ipq4019-add-ethernet-controller-DT-node.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 44327d7098d4f32c24ec8c528e5aff6e030956bc Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 20 Oct 2021 13:21:45 +0200 -Subject: [PATCH] arm: dts: ipq4019: add ethernet controller DT node - -Since IPQ40xx SoC built-in ethernet controller now has a driver, -add its DT node so it can be used. - -Signed-off-by: Robert Marko ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 48 +++++++++++++++++++++++++++++ - 1 file changed, 48 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -38,6 +38,7 @@ - spi1 = &blsp1_spi2; - i2c0 = &blsp1_i2c3; - i2c1 = &blsp1_i2c4; -+ ethernet0 = &gmac; - }; - - cpus { -@@ -589,6 +590,57 @@ - status = "disabled"; - }; - -+ gmac: ethernet@c080000 { -+ compatible = "qcom,ipq4019-ess-edma"; -+ reg = <0xc080000 0x8000>; -+ resets = <&gcc ESS_RESET>; -+ reset-names = "ess_rst"; -+ clocks = <&gcc GCC_ESS_CLK>; -+ clock-names = "ess_clk"; -+ interrupts = , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ , -+ ; -+ -+ status = "disabled"; -+ -+ phy-mode = "internal"; -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ pause; -+ asym-pause; -+ }; -+ }; -+ - mdio: mdio@90000 { - #address-cells = <1>; - #size-cells = <0>; diff --git a/target/linux/ipq40xx/patches-5.15/704-net-phy-define-PSGMII-PHY-interface-mode.patch b/target/linux/ipq40xx/patches-5.15/704-net-phy-define-PSGMII-PHY-interface-mode.patch deleted file mode 100644 index ed5b7b60fb..0000000000 --- a/target/linux/ipq40xx/patches-5.15/704-net-phy-define-PSGMII-PHY-interface-mode.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 157ac9f52fd9b9a22cf12f7755a905fb34ef72f7 Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Fri, 25 Dec 2020 08:02:47 +0100 -Subject: [PATCH] net: phy: define PSGMII PHY interface mode - -The PSGMII interface is similar to QSGMII. The main difference -is that the PSGMII interface combines five SGMII lines into a -single link while in QSGMII only four lines are combined. - -Similarly to the QSGMII, this interface mode might also needs -special handling within the MAC driver. - -Add definitions for the PHY layer to allow to express this type -of connection between the MAC and PHY. - -Signed-off-by: Gabor Juhos ---- - Documentation/devicetree/bindings/net/ethernet-controller.yaml | 1 + - drivers/net/phy/phylink.c | 2 ++ - include/linux/phy.h | 3 +++ - 3 files changed, 6 insertions(+) - ---- a/Documentation/devicetree/bindings/net/ethernet-controller.yaml -+++ b/Documentation/devicetree/bindings/net/ethernet-controller.yaml -@@ -64,6 +64,7 @@ properties: - - mii - - gmii - - sgmii -+ - psgmii - - qsgmii - - tbi - - rev-mii ---- a/drivers/net/phy/phylink.c -+++ b/drivers/net/phy/phylink.c -@@ -371,6 +371,7 @@ void phylink_get_linkmodes(unsigned long - case PHY_INTERFACE_MODE_RGMII_RXID: - case PHY_INTERFACE_MODE_RGMII_ID: - case PHY_INTERFACE_MODE_RGMII: -+ case PHY_INTERFACE_MODE_PSGMII: - case PHY_INTERFACE_MODE_QSGMII: - case PHY_INTERFACE_MODE_SGMII: - case PHY_INTERFACE_MODE_GMII: -@@ -634,6 +635,7 @@ static int phylink_parse_mode(struct phy - - switch (pl->link_config.interface) { - case PHY_INTERFACE_MODE_SGMII: -+ case PHY_INTERFACE_MODE_PSGMII: - case PHY_INTERFACE_MODE_QSGMII: - phylink_set(pl->supported, 10baseT_Half); - phylink_set(pl->supported, 10baseT_Full); ---- a/include/linux/phy.h -+++ b/include/linux/phy.h -@@ -139,6 +139,7 @@ typedef enum { - PHY_INTERFACE_MODE_XGMII, - PHY_INTERFACE_MODE_XLGMII, - PHY_INTERFACE_MODE_MOCA, -+ PHY_INTERFACE_MODE_PSGMII, - PHY_INTERFACE_MODE_QSGMII, - PHY_INTERFACE_MODE_TRGMII, - PHY_INTERFACE_MODE_100BASEX, -@@ -244,6 +245,8 @@ static inline const char *phy_modes(phy_ - return "xlgmii"; - case PHY_INTERFACE_MODE_MOCA: - return "moca"; -+ case PHY_INTERFACE_MODE_PSGMII: -+ return "psgmii"; - case PHY_INTERFACE_MODE_QSGMII: - return "qsgmii"; - case PHY_INTERFACE_MODE_TRGMII: diff --git a/target/linux/ipq40xx/patches-5.15/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch b/target/linux/ipq40xx/patches-5.15/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch deleted file mode 100644 index 13b169e576..0000000000 --- a/target/linux/ipq40xx/patches-5.15/705-net-dsa-add-Qualcomm-IPQ4019-built-in-switch-support.patch +++ /dev/null @@ -1,57 +0,0 @@ -From b5f71652b85a85ea53162e9e2b760b84fd0d254f Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 1 Nov 2021 18:10:28 +0100 -Subject: [PATCH] net: dsa: add Qualcomm IPQ4019 built-in switch support - -Qualcomm IPQ40xx SoC-s have a variant of QCA8337N switch built-in. - -It shares most of the stuff with its external counterpart, however it is -modified for the SoC. -Namely, it doesn't have second CPU port (Port 6), so it has 6 ports -instead of 7. -It also has no built-in PHY-s but rather requires external PSGMII based -companion PHY-s (QCA8072 and QCA8075) for which it first needs to carry -out calibration before using them. -PSGMII has a SoC built-in PHY that is used to connect to the PHY-s which -unfortunately requires some magic values as the datasheet doesnt document -the bits that are being set or the register at all. - -Since its built-in it is MMIO like other peripherals and doesn't have its -own MDIO bus but depends on the SoC provided one. - -CPU connection is at Port 0 and it uses some kind of a internal connection -and no traditional RGMII/SGMII. -It also doesn't use in-band tagging like other qca8k switches so a shinfo -based tagger is used. - -Signed-off-by: Robert Marko ---- - drivers/net/dsa/qca/Kconfig | 9 +++++++++ - drivers/net/dsa/qca/Makefile | 1 + - 2 files changed, 10 insertions(+) - ---- a/drivers/net/dsa/qca/Kconfig -+++ b/drivers/net/dsa/qca/Kconfig -@@ -23,3 +23,13 @@ config NET_DSA_QCA8K_LEDS_SUPPORT - help - This enabled support for LEDs present on the Qualcomm Atheros - QCA8K Ethernet switch chips. -+ -+config NET_DSA_QCA8K_IPQ4019 -+ tristate "Qualcomm Atheros IPQ4019 built-in Ethernet switch support" -+ depends on HAS_IOMEM && NET_DSA -+ select NET_DSA_TAG_IPQ4019 -+ select REGMAP -+ help -+ This enables support for the Qualcomm Atheros IPQ4019 SoC built-in -+ Ethernet switch. -+ ---- a/drivers/net/dsa/qca/Makefile -+++ b/drivers/net/dsa/qca/Makefile -@@ -1,5 +1,6 @@ - # SPDX-License-Identifier: GPL-2.0-only - obj-$(CONFIG_NET_DSA_AR9331) += ar9331.o -+obj-$(CONFIG_NET_DSA_QCA8K_IPQ4019) += qca8k-ipq4019.o - obj-$(CONFIG_NET_DSA_QCA8K) += qca8k.o - qca8k-y += qca8k-common.o qca8k-8xxx.o - ifdef CONFIG_NET_DSA_QCA8K_LEDS_SUPPORT diff --git a/target/linux/ipq40xx/patches-5.15/706-arm-dts-ipq4019-add-switch-node.patch b/target/linux/ipq40xx/patches-5.15/706-arm-dts-ipq4019-add-switch-node.patch deleted file mode 100644 index a231c7331b..0000000000 --- a/target/linux/ipq40xx/patches-5.15/706-arm-dts-ipq4019-add-switch-node.patch +++ /dev/null @@ -1,98 +0,0 @@ -From ebb62523990a27b3a25e422fa575619f7f725a20 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Mon, 1 Nov 2021 18:15:04 +0100 -Subject: [PATCH] arm: dts: ipq4019: add switch node - -Since the built-in IPQ40xx switch now has a driver, add the required node -for it to work. - -Signed-off-by: Robert Marko ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 78 +++++++++++++++++++++++++++++ - 1 file changed, 78 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -590,6 +590,82 @@ - status = "disabled"; - }; - -+ switch: switch@c000000 { -+ compatible = "qca,ipq4019-qca8337n"; -+ reg = <0xc000000 0x80000>, <0x98000 0x800>; -+ reg-names = "base", "psgmii_phy"; -+ resets = <&gcc ESS_PSGMII_ARES>; -+ reset-names = "psgmii_rst"; -+ mdio = <&mdio>; -+ psgmii-ethphy = <&psgmiiphy>; -+ -+ status = "disabled"; -+ -+ ports { -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ port@0 { /* MAC0 */ -+ reg = <0>; -+ label = "cpu"; -+ ethernet = <&gmac>; -+ phy-mode = "internal"; -+ -+ fixed-link { -+ speed = <1000>; -+ full-duplex; -+ pause; -+ asym-pause; -+ }; -+ }; -+ -+ swport1: port@1 { /* MAC1 */ -+ reg = <1>; -+ label = "lan1"; -+ phy-handle = <ðphy0>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ -+ swport2: port@2 { /* MAC2 */ -+ reg = <2>; -+ label = "lan2"; -+ phy-handle = <ðphy1>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ -+ swport3: port@3 { /* MAC3 */ -+ reg = <3>; -+ label = "lan3"; -+ phy-handle = <ðphy2>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ -+ swport4: port@4 { /* MAC4 */ -+ reg = <4>; -+ label = "lan4"; -+ phy-handle = <ðphy3>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ -+ swport5: port@5 { /* MAC5 */ -+ reg = <5>; -+ label = "wan"; -+ phy-handle = <ðphy4>; -+ phy-mode = "psgmii"; -+ -+ status = "disabled"; -+ }; -+ }; -+ }; -+ - gmac: ethernet@c080000 { - compatible = "qcom,ipq4019-ess-edma"; - reg = <0xc080000 0x8000>; diff --git a/target/linux/ipq40xx/patches-5.15/707-dt-bindings-net-add-QCA807x-PHY.patch b/target/linux/ipq40xx/patches-5.15/707-dt-bindings-net-add-QCA807x-PHY.patch deleted file mode 100644 index dfb8d692ab..0000000000 --- a/target/linux/ipq40xx/patches-5.15/707-dt-bindings-net-add-QCA807x-PHY.patch +++ /dev/null @@ -1,61 +0,0 @@ -From c66863c1ba8995b61e6d727d78a241c734f5bb57 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Thu, 1 Oct 2020 15:05:35 +0200 -Subject: [PATCH] dt-bindings: net: add QCA807x PHY - -Add DT bindings for Qualcomm QCA807x PHY series. - -Signed-off-by: Robert Marko ---- - include/dt-bindings/net/qcom-qca807x.h | 45 ++++++++++++++++++++++++++ - 1 file changed, 45 insertions(+) - create mode 100644 include/dt-bindings/net/qcom-qca807x.h - ---- /dev/null -+++ b/include/dt-bindings/net/qcom-qca807x.h -@@ -0,0 +1,45 @@ -+/* SPDX-License-Identifier: GPL-2.0-or-later */ -+/* -+ * Device Tree constants for the Qualcomm QCA807X PHYs -+ */ -+ -+#ifndef _DT_BINDINGS_QCOM_QCA807X_H -+#define _DT_BINDINGS_QCOM_QCA807X_H -+ -+#define PSGMII_QSGMII_TX_DRIVER_140MV 0 -+#define PSGMII_QSGMII_TX_DRIVER_160MV 1 -+#define PSGMII_QSGMII_TX_DRIVER_180MV 2 -+#define PSGMII_QSGMII_TX_DRIVER_200MV 3 -+#define PSGMII_QSGMII_TX_DRIVER_220MV 4 -+#define PSGMII_QSGMII_TX_DRIVER_240MV 5 -+#define PSGMII_QSGMII_TX_DRIVER_260MV 6 -+#define PSGMII_QSGMII_TX_DRIVER_280MV 7 -+#define PSGMII_QSGMII_TX_DRIVER_300MV 8 -+#define PSGMII_QSGMII_TX_DRIVER_320MV 9 -+#define PSGMII_QSGMII_TX_DRIVER_400MV 10 -+#define PSGMII_QSGMII_TX_DRIVER_500MV 11 -+/* Default value */ -+#define PSGMII_QSGMII_TX_DRIVER_600MV 12 -+ -+/* Full amplitude, full bias current */ -+#define QCA807X_CONTROL_DAC_FULL_VOLT_BIAS 0 -+/* Amplitude follow DSP (amplitude is adjusted based on cable length), half bias current */ -+#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS 1 -+/* Full amplitude, bias current follow DSP (bias current is adjusted based on cable length) */ -+#define QCA807X_CONTROL_DAC_FULL_VOLT_DSP_BIAS 2 -+/* Both amplitude and bias current follow DSP */ -+#define QCA807X_CONTROL_DAC_DSP_VOLT_BIAS 3 -+/* Full amplitude, half bias current */ -+#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS 4 -+/* Amplitude follow DSP setting; 1/4 bias current when cable<10m, -+ * otherwise half bias current -+ */ -+#define QCA807X_CONTROL_DAC_DSP_VOLT_QUARTER_BIAS 5 -+/* Full amplitude; same bias current setting with “010” and “011”, -+ * but half more bias is reduced when cable <10m -+ */ -+#define QCA807X_CONTROL_DAC_FULL_VOLT_HALF_BIAS_SHORT 6 -+/* Amplitude follow DSP; same bias current setting with “110”, default value */ -+#define QCA807X_CONTROL_DAC_DSP_VOLT_HALF_BIAS_SHORT 7 -+ -+#endif diff --git a/target/linux/ipq40xx/patches-5.15/708-net-phy-Add-Qualcom-QCA807x-driver.patch b/target/linux/ipq40xx/patches-5.15/708-net-phy-Add-Qualcom-QCA807x-driver.patch deleted file mode 100644 index 6a92a103d6..0000000000 --- a/target/linux/ipq40xx/patches-5.15/708-net-phy-Add-Qualcom-QCA807x-driver.patch +++ /dev/null @@ -1,50 +0,0 @@ -From f825cdc8bfde7616a14e2163f16303a8973031d2 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Wed, 7 Oct 2020 17:38:48 +0200 -Subject: [PATCH] net: phy: Add Qualcom QCA807x driver - -This adds driver for the Qualcomm QCA8072 and QCA8075 PHY-s. - -They are 2 or 5 port IEEE 802.3 clause 22 compliant 10BASE-Te, 100BASE-TX and 1000BASE-T PHY-s. - -They feature 2 SerDes, one for PSGMII or QSGMII connection with MAC, while second one is SGMII for connection to MAC or fiber. - -Both models have a combo port that supports 1000BASE-X and 100BASE-FX fiber. - -Each PHY inside of QCA807x series has 4 digitally controlled output only pins that natively drive LED-s. -But some vendors used these to driver generic LED-s controlled by userspace, -so lets enable registering each PHY as GPIO controller and add driver for it. - -These are commonly used in Qualcomm IPQ40xx, IPQ60xx and IPQ807x boards. - -Signed-off-by: Robert Marko ---- - drivers/net/phy/Kconfig | 6 ++++++ - drivers/net/phy/Makefile | 1 + - 2 files changed, 7 insertions(+) - ---- a/drivers/net/phy/Kconfig -+++ b/drivers/net/phy/Kconfig -@@ -347,6 +347,12 @@ config AT803X_PHY - Currently supports the AR8030, AR8031, AR8033, AR8035 and internal - QCA8337(Internal qca8k PHY) model - -+config QCA807X_PHY -+ tristate "Qualcomm QCA807X PHYs" -+ depends on OF_MDIO -+ help -+ Currently supports the QCA8072 and QCA8075 models. -+ - config QSEMI_PHY - tristate "Quality Semiconductor PHYs" - help ---- a/drivers/net/phy/Makefile -+++ b/drivers/net/phy/Makefile -@@ -92,6 +92,7 @@ obj-$(CONFIG_NATIONAL_PHY) += national.o - obj-$(CONFIG_NXP_C45_TJA11XX_PHY) += nxp-c45-tja11xx.o - obj-$(CONFIG_NXP_TJA11XX_PHY) += nxp-tja11xx.o - obj-$(CONFIG_QSEMI_PHY) += qsemi.o -+obj-$(CONFIG_QCA807X_PHY) += qca807x.o - obj-$(CONFIG_REALTEK_PHY) += realtek.o - obj-$(CONFIG_RENESAS_PHY) += uPD60620.o - obj-$(CONFIG_ROCKCHIP_PHY) += rockchip.o diff --git a/target/linux/ipq40xx/patches-5.15/709-arm-dts-ipq4019-QCA807x-properties.patch b/target/linux/ipq40xx/patches-5.15/709-arm-dts-ipq4019-QCA807x-properties.patch deleted file mode 100644 index cc4b44b393..0000000000 --- a/target/linux/ipq40xx/patches-5.15/709-arm-dts-ipq4019-QCA807x-properties.patch +++ /dev/null @@ -1,61 +0,0 @@ -From e0fa88eaa3c176b71e563da68949ac2ab45aaa61 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Fri, 2 Oct 2020 10:43:26 +0200 -Subject: [PATCH] arm: dts: ipq4019: QCA807x properties - -This adds necessary DT properties for QCA807x PHY-s to IPQ4019 DTSI. - -Signed-off-by: Robert Marko ---- - arch/arm/boot/dts/qcom-ipq4019.dtsi | 18 ++++++++++++++++++ - 1 file changed, 18 insertions(+) - ---- a/arch/arm/boot/dts/qcom-ipq4019.dtsi -+++ b/arch/arm/boot/dts/qcom-ipq4019.dtsi -@@ -8,6 +8,7 @@ - #include - #include - #include -+#include - - / { - #address-cells = <1>; -@@ -726,22 +727,38 @@ - - ethphy0: ethernet-phy@0 { - reg = <0>; -+ -+ qcom,control-dac = ; - }; - - ethphy1: ethernet-phy@1 { - reg = <1>; -+ -+ qcom,control-dac = ; - }; - - ethphy2: ethernet-phy@2 { - reg = <2>; -+ -+ qcom,control-dac = ; - }; - - ethphy3: ethernet-phy@3 { - reg = <3>; -+ -+ qcom,control-dac = ; - }; - - ethphy4: ethernet-phy@4 { - reg = <4>; -+ -+ qcom,control-dac = ; -+ }; -+ -+ psgmiiphy: psgmii-phy@5 { -+ reg = <5>; -+ -+ qcom,tx-driver-strength = ; - }; - }; - diff --git a/target/linux/ipq40xx/patches-5.15/850-soc-add-qualcomm-syscon.patch b/target/linux/ipq40xx/patches-5.15/850-soc-add-qualcomm-syscon.patch deleted file mode 100644 index 9b44a4c885..0000000000 --- a/target/linux/ipq40xx/patches-5.15/850-soc-add-qualcomm-syscon.patch +++ /dev/null @@ -1,180 +0,0 @@ -From: Christian Lamparter -Subject: SoC: add qualcomm syscon ---- a/drivers/soc/qcom/Makefile -+++ b/drivers/soc/qcom/Makefile -@@ -21,6 +21,7 @@ obj-$(CONFIG_QCOM_SMP2P) += smp2p.o - obj-$(CONFIG_QCOM_SMSM) += smsm.o - obj-$(CONFIG_QCOM_SOCINFO) += socinfo.o - obj-$(CONFIG_QCOM_WCNSS_CTRL) += wcnss_ctrl.o -+obj-$(CONFIG_QCOM_TCSR) += qcom_tcsr.o - obj-$(CONFIG_QCOM_APR) += apr.o - obj-$(CONFIG_QCOM_LLCC) += llcc-qcom.o - obj-$(CONFIG_QCOM_RPMHPD) += rpmhpd.o ---- a/drivers/soc/qcom/Kconfig -+++ b/drivers/soc/qcom/Kconfig -@@ -192,6 +192,13 @@ config QCOM_SOCINFO - Say yes here to support the Qualcomm socinfo driver, providing - information about the SoC to user space. - -+config QCOM_TCSR -+ tristate "QCOM Top Control and Status Registers" -+ depends on ARCH_QCOM -+ help -+ Say y here to enable TCSR support. The TCSR provides control -+ functions for various peripherals. -+ - config QCOM_WCNSS_CTRL - tristate "Qualcomm WCNSS control driver" - depends on ARCH_QCOM || COMPILE_TEST ---- /dev/null -+++ b/drivers/soc/qcom/qcom_tcsr.c -@@ -0,0 +1,98 @@ -+/* -+ * Copyright (c) 2014, The Linux foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License rev 2 and -+ * only rev 2 as published by the free Software foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or fITNESS fOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#define TCSR_USB_PORT_SEL 0xb0 -+#define TCSR_USB_HSPHY_CONFIG 0xC -+ -+#define TCSR_ESS_INTERFACE_SEL_OFFSET 0x0 -+#define TCSR_ESS_INTERFACE_SEL_MASK 0xf -+ -+#define TCSR_WIFI0_GLB_CFG_OFFSET 0x0 -+#define TCSR_WIFI1_GLB_CFG_OFFSET 0x4 -+#define TCSR_PNOC_SNOC_MEMTYPE_M0_M2 0x4 -+ -+static int tcsr_probe(struct platform_device *pdev) -+{ -+ struct resource *res; -+ const struct device_node *node = pdev->dev.of_node; -+ void __iomem *base; -+ u32 val; -+ -+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); -+ base = devm_ioremap_resource(&pdev->dev, res); -+ if (IS_ERR(base)) -+ return PTR_ERR(base); -+ -+ if (!of_property_read_u32(node, "qcom,usb-ctrl-select", &val)) { -+ dev_err(&pdev->dev, "setting usb port select = %d\n", val); -+ writel(val, base + TCSR_USB_PORT_SEL); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,usb-hsphy-mode-select", &val)) { -+ dev_info(&pdev->dev, "setting usb hs phy mode select = %x\n", val); -+ writel(val, base + TCSR_USB_HSPHY_CONFIG); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,ess-interface-select", &val)) { -+ u32 tmp = 0; -+ dev_info(&pdev->dev, "setting ess interface select = %x\n", val); -+ tmp = readl(base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ tmp = tmp & (~TCSR_ESS_INTERFACE_SEL_MASK); -+ tmp = tmp | (val&TCSR_ESS_INTERFACE_SEL_MASK); -+ writel(tmp, base + TCSR_ESS_INTERFACE_SEL_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_glb_cfg", &val)) { -+ dev_info(&pdev->dev, "setting wifi_glb_cfg = %x\n", val); -+ writel(val, base + TCSR_WIFI0_GLB_CFG_OFFSET); -+ writel(val, base + TCSR_WIFI1_GLB_CFG_OFFSET); -+ } -+ -+ if (!of_property_read_u32(node, "qcom,wifi_noc_memtype_m0_m2", &val)) { -+ dev_info(&pdev->dev, -+ "setting wifi_noc_memtype_m0_m2 = %x\n", val); -+ writel(val, base + TCSR_PNOC_SNOC_MEMTYPE_M0_M2); -+ } -+ -+ return 0; -+} -+ -+static const struct of_device_id tcsr_dt_match[] = { -+ { .compatible = "qcom,tcsr", }, -+ { }, -+}; -+ -+MODULE_DEVICE_TABLE(of, tcsr_dt_match); -+ -+static struct platform_driver tcsr_driver = { -+ .driver = { -+ .name = "tcsr", -+ .owner = THIS_MODULE, -+ .of_match_table = tcsr_dt_match, -+ }, -+ .probe = tcsr_probe, -+}; -+ -+module_platform_driver(tcsr_driver); -+ -+MODULE_AUTHOR("Andy Gross "); -+MODULE_DESCRIPTION("QCOM TCSR driver"); -+MODULE_LICENSE("GPL v2"); ---- /dev/null -+++ b/include/dt-bindings/soc/qcom,tcsr.h -@@ -0,0 +1,48 @@ -+/* Copyright (c) 2014, The Linux Foundation. All rights reserved. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 and -+ * only version 2 as published by the Free Software Foundation. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ */ -+#ifndef __DT_BINDINGS_QCOM_TCSR_H -+#define __DT_BINDINGS_QCOM_TCSR_H -+ -+#define TCSR_USB_SELECT_USB3_P0 0x1 -+#define TCSR_USB_SELECT_USB3_P1 0x2 -+#define TCSR_USB_SELECT_USB3_DUAL 0x3 -+ -+/* IPQ40xx HS PHY Mode Select */ -+#define TCSR_USB_HSPHY_HOST_MODE 0x00E700E7 -+#define TCSR_USB_HSPHY_DEVICE_MODE 0x00C700E7 -+ -+/* IPQ40xx ess interface mode select */ -+#define TCSR_ESS_PSGMII 0 -+#define TCSR_ESS_PSGMII_RGMII5 1 -+#define TCSR_ESS_PSGMII_RMII0 2 -+#define TCSR_ESS_PSGMII_RMII1 4 -+#define TCSR_ESS_PSGMII_RMII0_RMII1 6 -+#define TCSR_ESS_PSGMII_RGMII4 9 -+ -+/* -+ * IPQ40xx WiFi Global Config -+ * Bit 30:AXID_EN -+ * Enable AXI master bus Axid translating to confirm all txn submitted by order -+ * Bit 24: Use locally generated socslv_wxi_bvalid -+ * 1: use locally generate socslv_wxi_bvalid for performance. -+ * 0: use SNOC socslv_wxi_bvalid. -+ */ -+#define TCSR_WIFI_GLB_CFG 0x41000000 -+ -+/* IPQ40xx MEM_TYPE_SEL_M0_M2 Select Bit 26:24 - 2 NORMAL */ -+#define TCSR_WIFI_NOC_MEMTYPE_M0_M2 0x02222222 -+ -+/* TCSR A/B REG */ -+#define IPQ806X_TCSR_REG_A_ADM_CRCI_MUX_SEL 0 -+#define IPQ806X_TCSR_REG_B_ADM_CRCI_MUX_SEL 1 -+ -+#endif diff --git a/target/linux/ipq40xx/patches-5.15/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch b/target/linux/ipq40xx/patches-5.15/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch deleted file mode 100644 index b5b89b26f1..0000000000 --- a/target/linux/ipq40xx/patches-5.15/910-Revert-firmware-qcom_scm-Clear-download-bit-during-r.patch +++ /dev/null @@ -1,27 +0,0 @@ -From c668fd2c4d9ad4a510fd214a2da83bd9b67a2508 Mon Sep 17 00:00:00 2001 -From: Robert Marko -Date: Sun, 13 Aug 2023 18:13:08 +0200 -Subject: [PATCH] Revert "firmware: qcom_scm: Clear download bit during reboot" - -This reverts commit a3ea89b5978dbcd0fa55f675c5a1e04611093709. - -It is breaking reboot on IPQ4019 boards, so revert until a proper fix -is found. - -Signed-off-by: Robert Marko ---- - drivers/firmware/qcom_scm.c | 3 ++- - 1 file changed, 2 insertions(+), 1 deletion(-) - ---- a/drivers/firmware/qcom_scm.c -+++ b/drivers/firmware/qcom_scm.c -@@ -1361,7 +1361,8 @@ static int qcom_scm_probe(struct platfor - static void qcom_scm_shutdown(struct platform_device *pdev) - { - /* Clean shutdown, disable download mode to allow normal restart */ -- qcom_scm_set_download_mode(false); -+ if (download_mode) -+ qcom_scm_set_download_mode(false); - } - - static const struct of_device_id qcom_scm_dt_match[] = { diff --git a/target/linux/ipq40xx/patches-5.15/998-lantiq-atm-hacks.patch b/target/linux/ipq40xx/patches-5.15/998-lantiq-atm-hacks.patch deleted file mode 100644 index c15a4b3ae3..0000000000 --- a/target/linux/ipq40xx/patches-5.15/998-lantiq-atm-hacks.patch +++ /dev/null @@ -1,43 +0,0 @@ -From: John Crispin -Date: Fri, 3 Aug 2012 10:27:25 +0200 -Subject: [PATCH 04/36] MIPS: lantiq: add atm hack - -Signed-off-by: John Crispin ---- a/include/uapi/linux/atm.h -+++ b/include/uapi/linux/atm.h -@@ -131,8 +131,14 @@ - #define ATM_ABR 4 - #define ATM_ANYCLASS 5 /* compatible with everything */ - -+#define ATM_VBR_NRT ATM_VBR -+#define ATM_VBR_RT 6 -+#define ATM_UBR_PLUS 7 -+#define ATM_GFR 8 -+ - #define ATM_MAX_PCR -1 /* maximum available PCR */ - -+ - struct atm_trafprm { - unsigned char traffic_class; /* traffic class (ATM_UBR, ...) */ - int max_pcr; /* maximum PCR in cells per second */ -@@ -155,6 +161,9 @@ struct atm_trafprm { - unsigned int adtf :10; /* ACR Decrease Time Factor (10-bit) */ - unsigned int cdf :3; /* Cutoff Decrease Factor (3-bit) */ - unsigned int spare :9; /* spare bits */ -+ int scr; /* sustained rate in cells per second */ -+ int mbs; /* maximum burst size (MBS) in cells */ -+ int cdv; /* Cell delay variation */ - }; - - struct atm_qos { ---- a/net/atm/proc.c -+++ b/net/atm/proc.c -@@ -141,7 +141,7 @@ static void *vcc_seq_next(struct seq_fil - static void pvc_info(struct seq_file *seq, struct atm_vcc *vcc) - { - static const char *const class_name[] = { -- "off", "UBR", "CBR", "VBR", "ABR"}; -+ "off","UBR","CBR","NTR-VBR","ABR","ANY","RT-VBR","UBR+","GFR"}; - static const char *const aal_name[] = { - "---", "1", "2", "3/4", /* 0- 3 */ - "???", "5", "???", "???", /* 4- 7 */ diff --git a/target/linux/ipq40xx/patches-5.15/999-atm-mpoa-intel-dsl-phy-support.patch b/target/linux/ipq40xx/patches-5.15/999-atm-mpoa-intel-dsl-phy-support.patch deleted file mode 100644 index b774fc39d8..0000000000 --- a/target/linux/ipq40xx/patches-5.15/999-atm-mpoa-intel-dsl-phy-support.patch +++ /dev/null @@ -1,137 +0,0 @@ -From: Subhra Banerjee -Date: Fri, 31 Aug 2018 12:01:19 +0530 -Subject: [PATCH] UGW_SW-29163: ATM oam support - ---- a/drivers/net/ppp/ppp_generic.c -+++ b/drivers/net/ppp/ppp_generic.c -@@ -2952,6 +2952,22 @@ char *ppp_dev_name(struct ppp_channel *c - return name; - } - -+/* -+ * Return the PPP device interface pointer -+ */ -+struct net_device *ppp_device(struct ppp_channel *chan) -+{ -+ struct channel *pch = chan->ppp; -+ struct net_device *dev = NULL; -+ -+ if (pch) { -+ read_lock_bh(&pch->upl); -+ if (pch->ppp && pch->ppp->dev) -+ dev = pch->ppp->dev; -+ read_unlock_bh(&pch->upl); -+ } -+ return dev; -+} - - /* - * Disconnect a channel from the generic layer. -@@ -3598,6 +3614,7 @@ EXPORT_SYMBOL(ppp_unregister_channel); - EXPORT_SYMBOL(ppp_channel_index); - EXPORT_SYMBOL(ppp_unit_number); - EXPORT_SYMBOL(ppp_dev_name); -+EXPORT_SYMBOL(ppp_device); - EXPORT_SYMBOL(ppp_input); - EXPORT_SYMBOL(ppp_input_error); - EXPORT_SYMBOL(ppp_output_wakeup); ---- a/include/linux/ppp_channel.h -+++ b/include/linux/ppp_channel.h -@@ -74,6 +74,9 @@ extern int ppp_unit_number(struct ppp_ch - /* Get the device name associated with a channel, or NULL if none */ - extern char *ppp_dev_name(struct ppp_channel *); - -+/* Get the device pointer associated with a channel, or NULL if none */ -+extern struct net_device *ppp_device(struct ppp_channel *); -+ - /* - * SMP locking notes: - * The channel code must ensure that when it calls ppp_unregister_channel, ---- a/net/atm/Kconfig -+++ b/net/atm/Kconfig -@@ -56,6 +56,12 @@ config ATM_MPOA - subnetwork boundaries. These shortcut connections bypass routers - enhancing overall network performance. - -+config ATM_MPOA_INTEL_DSL_PHY_SUPPORT -+ bool "Intel DSL Phy MPOA support" -+ depends on ATM && INET && ATM_MPOA!=n -+ help -+ Add support for Intel DSL Phy ATM MPOA -+ - config ATM_BR2684 - tristate "RFC1483/2684 Bridged protocols" - depends on ATM && INET ---- a/net/atm/br2684.c -+++ b/net/atm/br2684.c -@@ -596,6 +596,11 @@ static int br2684_regvcc(struct atm_vcc - atmvcc->push = br2684_push; - atmvcc->pop = br2684_pop; - atmvcc->release_cb = br2684_release_cb; -+#if IS_ENABLED(CONFIG_ATM_MPOA_INTEL_DSL_PHY_SUPPORT) -+ if (atm_hook_mpoa_setup) /* IPoA or EoA w/o FCS */ -+ atm_hook_mpoa_setup(atmvcc, brdev->payload == p_routed ? 3 : 0, -+ brvcc->encaps == BR2684_ENCAPS_LLC ? 1 : 0, net_dev); -+#endif - atmvcc->owner = THIS_MODULE; - - /* initialize netdev carrier state */ ---- a/net/atm/common.c -+++ b/net/atm/common.c -@@ -137,6 +137,11 @@ static struct proto vcc_proto = { - .release_cb = vcc_release_cb, - }; - -+#if IS_ENABLED(CONFIG_ATM_MPOA_INTEL_DSL_PHY_SUPPORT) -+void (*atm_hook_mpoa_setup)(struct atm_vcc *, int, int, struct net_device *) = NULL; -+EXPORT_SYMBOL(atm_hook_mpoa_setup); -+#endif -+ - int vcc_create(struct net *net, struct socket *sock, int protocol, int family, int kern) - { - struct sock *sk; ---- a/net/atm/common.h -+++ b/net/atm/common.h -@@ -53,4 +53,6 @@ int svc_change_qos(struct atm_vcc *vcc,s - - void atm_dev_release_vccs(struct atm_dev *dev); - -+extern void (*atm_hook_mpoa_setup)(struct atm_vcc *, int, int, struct net_device *); -+ - #endif ---- a/net/atm/mpc.c -+++ b/net/atm/mpc.c -@@ -31,6 +31,7 @@ - /* Modular too */ - #include - -+#include "common.h" - #include "lec.h" - #include "mpc.h" - #include "resources.h" -@@ -645,6 +646,10 @@ static int atm_mpoa_vcc_attach(struct at - vcc->proto_data = mpc->dev; - vcc->push = mpc_push; - -+#if IS_ENABLED(CONFIG_ATM_MPOA_INTEL_DSL_PHY_SUPPORT) -+ if (atm_hook_mpoa_setup) /* IPoA, LLC */ -+ atm_hook_mpoa_setup(vcc, 3, 1, mpc->dev); -+#endif - return 0; - } - ---- a/net/atm/pppoatm.c -+++ b/net/atm/pppoatm.c -@@ -422,6 +422,12 @@ static int pppoatm_assign_vcc(struct atm - atmvcc->user_back = pvcc; - atmvcc->push = pppoatm_push; - atmvcc->pop = pppoatm_pop; -+#if IS_ENABLED(CONFIG_ATM_MPOA_INTEL_DSL_PHY_SUPPORT) -+ if (atm_hook_mpoa_setup) /* PPPoA */ -+ atm_hook_mpoa_setup(atmvcc, 2, -+ pvcc->encaps == e_llc ? 1 : 0, -+ ppp_device(&pvcc->chan)); -+#endif - atmvcc->release_cb = pppoatm_release_cb; - __module_get(THIS_MODULE); - atmvcc->owner = THIS_MODULE;