From: Daniel Golle Date: Mon, 25 Jul 2022 00:31:20 +0000 (+0200) Subject: kernel: backport generic phylink validate X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=aab466f422500842adb62ddb7b1357e2e123ebb2;p=openwrt%2Fstaging%2Fsvanheule.git kernel: backport generic phylink validate Backport generic phylink validate series and make use of it for mtk_eth_soc Ethernet driver as well as mt7530 DSA driver. Signed-off-by: Daniel Golle --- diff --git a/target/linux/generic/backport-5.15/703-01-v5.16-net-phylink-add-MAC-phy_interface_t-bitmap.patch b/target/linux/generic/backport-5.15/703-01-v5.16-net-phylink-add-MAC-phy_interface_t-bitmap.patch new file mode 100644 index 0000000000..b72faec8d9 --- /dev/null +++ b/target/linux/generic/backport-5.15/703-01-v5.16-net-phylink-add-MAC-phy_interface_t-bitmap.patch @@ -0,0 +1,24 @@ +From 38c310eb46f5f80213a92093af11af270c209a76 Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Tue, 26 Oct 2021 11:06:06 +0100 +Subject: [PATCH] net: phylink: add MAC phy_interface_t bitmap + +Add a phy_interface_t bitmap so the MAC driver can specifiy which PHY +interface modes it supports. + +Signed-off-by: Russell King +Signed-off-by: David S. Miller +--- + include/linux/phylink.h | 1 + + 1 file changed, 1 insertion(+) + +--- a/include/linux/phylink.h ++++ b/include/linux/phylink.h +@@ -76,6 +76,7 @@ struct phylink_config { + bool ovr_an_inband; + void (*get_fixed_state)(struct phylink_config *config, + struct phylink_link_state *state); ++ DECLARE_PHY_INTERFACE_MASK(supported_interfaces); + }; + + /** diff --git a/target/linux/generic/backport-5.15/703-02-v5.16-net-phylink-use-supported_interfaces-for-phylink-val.patch b/target/linux/generic/backport-5.15/703-02-v5.16-net-phylink-use-supported_interfaces-for-phylink-val.patch new file mode 100644 index 0000000000..8996fc8d45 --- /dev/null +++ b/target/linux/generic/backport-5.15/703-02-v5.16-net-phylink-use-supported_interfaces-for-phylink-val.patch @@ -0,0 +1,98 @@ +From d25f3a74f30aace819163dfa54f2a4b8ca1dc932 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Tue, 26 Oct 2021 11:06:11 +0100 +Subject: [PATCH] net: phylink: use supported_interfaces for phylink + validation + +If the network device supplies a supported interface bitmap, we can use +that during phylink's validation to simplify MAC drivers in two ways by +using the supported_interfaces bitmap to: + +1. reject unsupported interfaces before calling into the MAC driver. +2. generate the set of all supported link modes across all supported + interfaces (used mainly for SFP, but also some 10G PHYs.) + +Suggested-by: Sean Anderson +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/phy/phylink.c | 36 ++++++++++++++++++++++++++++++++++++ + include/linux/phylink.h | 12 ++++++++++-- + 2 files changed, 46 insertions(+), 2 deletions(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -155,9 +155,45 @@ static const char *phylink_an_mode_str(u + return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown"; + } + ++static int phylink_validate_any(struct phylink *pl, unsigned long *supported, ++ struct phylink_link_state *state) ++{ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(all_adv) = { 0, }; ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(all_s) = { 0, }; ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(s); ++ struct phylink_link_state t; ++ int intf; ++ ++ for (intf = 0; intf < PHY_INTERFACE_MODE_MAX; intf++) { ++ if (test_bit(intf, pl->config->supported_interfaces)) { ++ linkmode_copy(s, supported); ++ ++ t = *state; ++ t.interface = intf; ++ pl->mac_ops->validate(pl->config, s, &t); ++ linkmode_or(all_s, all_s, s); ++ linkmode_or(all_adv, all_adv, t.advertising); ++ } ++ } ++ ++ linkmode_copy(supported, all_s); ++ linkmode_copy(state->advertising, all_adv); ++ ++ return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; ++} ++ + static int phylink_validate(struct phylink *pl, unsigned long *supported, + struct phylink_link_state *state) + { ++ if (!phy_interface_empty(pl->config->supported_interfaces)) { ++ if (state->interface == PHY_INTERFACE_MODE_NA) ++ return phylink_validate_any(pl, supported, state); ++ ++ if (!test_bit(state->interface, ++ pl->config->supported_interfaces)) ++ return -EINVAL; ++ } ++ + pl->mac_ops->validate(pl->config, supported, state); + + return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; +--- a/include/linux/phylink.h ++++ b/include/linux/phylink.h +@@ -67,6 +67,8 @@ enum phylink_op_type { + * @ovr_an_inband: if true, override PCS to MLO_AN_INBAND + * @get_fixed_state: callback to execute to determine the fixed link state, + * if MAC link is at %MLO_AN_FIXED mode. ++ * @supported_interfaces: bitmap describing which PHY_INTERFACE_MODE_xxx ++ * are supported by the MAC/PCS. + */ + struct phylink_config { + struct device *dev; +@@ -134,8 +136,14 @@ struct phylink_mac_ops { + * based on @state->advertising and/or @state->speed and update + * @state->interface accordingly. See phylink_helper_basex_speed(). + * +- * When @state->interface is %PHY_INTERFACE_MODE_NA, phylink expects the +- * MAC driver to return all supported link modes. ++ * When @config->supported_interfaces has been set, phylink will iterate ++ * over the supported interfaces to determine the full capability of the ++ * MAC. The validation function must not print errors if @state->interface ++ * is set to an unexpected value. ++ * ++ * When @config->supported_interfaces is empty, phylink will call this ++ * function with @state->interface set to %PHY_INTERFACE_MODE_NA, and ++ * expects the MAC driver to return all supported link modes. + * + * If the @state->interface mode is not supported, then the @supported + * mask must be cleared. diff --git a/target/linux/generic/backport-5.15/703-03-v5.16-net-dsa-populate-supported_interfaces-member.patch b/target/linux/generic/backport-5.15/703-03-v5.16-net-dsa-populate-supported_interfaces-member.patch new file mode 100644 index 0000000000..83d1f7ee7c --- /dev/null +++ b/target/linux/generic/backport-5.15/703-03-v5.16-net-dsa-populate-supported_interfaces-member.patch @@ -0,0 +1,63 @@ +From c07c6e8eb4b38bae921f9e2f108d1e7f8e14226e Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Marek=20Beh=C3=BAn?= +Date: Thu, 28 Oct 2021 18:00:14 +0100 +Subject: [PATCH] net: dsa: populate supported_interfaces member +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Add a new DSA switch operation, phylink_get_interfaces, which should +fill in which PHY_INTERFACE_MODE_* are supported by given port. + +Use this before phylink_create() to fill phylinks supported_interfaces +member, allowing phylink to determine which PHY_INTERFACE_MODEs are +supported. + +Signed-off-by: Marek Behún +[tweaked patch and description to add more complete support -- rmk] +Signed-off-by: Russell King +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + include/net/dsa.h | 2 ++ + net/dsa/port.c | 4 ++++ + net/dsa/slave.c | 4 ++++ + 3 files changed, 10 insertions(+) + +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -626,6 +626,8 @@ struct dsa_switch_ops { + /* + * PHYLINK integration + */ ++ void (*phylink_get_interfaces)(struct dsa_switch *ds, int port, ++ unsigned long *supported_interfaces); + void (*phylink_validate)(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state); +--- a/net/dsa/port.c ++++ b/net/dsa/port.c +@@ -1172,6 +1172,10 @@ static int dsa_port_phylink_register(str + dp->pl_config.type = PHYLINK_DEV; + dp->pl_config.pcs_poll = ds->pcs_poll; + ++ if (ds->ops->phylink_get_interfaces) ++ ds->ops->phylink_get_interfaces(ds, dp->index, ++ dp->pl_config.supported_interfaces); ++ + dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn), + mode, &dsa_port_phylink_mac_ops); + if (IS_ERR(dp->pl)) { +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -1837,6 +1837,10 @@ static int dsa_slave_phy_setup(struct ne + dp->pl_config.poll_fixed_state = true; + } + ++ if (ds->ops->phylink_get_interfaces) ++ ds->ops->phylink_get_interfaces(ds, dp->index, ++ dp->pl_config.supported_interfaces); ++ + dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn), mode, + &dsa_port_phylink_mac_ops); + if (IS_ERR(dp->pl)) { diff --git a/target/linux/generic/backport-5.15/703-04-v5.17-net-dsa-consolidate-phylink-creation.patch b/target/linux/generic/backport-5.15/703-04-v5.17-net-dsa-consolidate-phylink-creation.patch new file mode 100644 index 0000000000..8b58c83312 --- /dev/null +++ b/target/linux/generic/backport-5.15/703-04-v5.17-net-dsa-consolidate-phylink-creation.patch @@ -0,0 +1,149 @@ +From 21bd64bd717dedac96f53b668144cbe37d3c12d4 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Tue, 30 Nov 2021 13:09:55 +0000 +Subject: [PATCH] net: dsa: consolidate phylink creation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The code in port.c and slave.c creating the phylink instance is very +similar - let's consolidate this into a single function. + +Signed-off-by: Russell King (Oracle) +Reviewed-by: Marek Behún +Reviewed-by: Andrew Lunn +Signed-off-by: Jakub Kicinski +--- + net/dsa/dsa_priv.h | 2 +- + net/dsa/port.c | 44 ++++++++++++++++++++++++++++---------------- + net/dsa/slave.c | 19 +++---------------- + 3 files changed, 32 insertions(+), 33 deletions(-) + +--- a/net/dsa/dsa_priv.h ++++ b/net/dsa/dsa_priv.h +@@ -260,13 +260,13 @@ int dsa_port_mrp_add_ring_role(const str + const struct switchdev_obj_ring_role_mrp *mrp); + int dsa_port_mrp_del_ring_role(const struct dsa_port *dp, + const struct switchdev_obj_ring_role_mrp *mrp); ++int dsa_port_phylink_create(struct dsa_port *dp); + int dsa_port_link_register_of(struct dsa_port *dp); + void dsa_port_link_unregister_of(struct dsa_port *dp); + int dsa_port_hsr_join(struct dsa_port *dp, struct net_device *hsr); + void dsa_port_hsr_leave(struct dsa_port *dp, struct net_device *hsr); + int dsa_port_tag_8021q_vlan_add(struct dsa_port *dp, u16 vid, bool broadcast); + void dsa_port_tag_8021q_vlan_del(struct dsa_port *dp, u16 vid, bool broadcast); +-extern const struct phylink_mac_ops dsa_port_phylink_mac_ops; + + static inline bool dsa_port_offloads_bridge_port(struct dsa_port *dp, + const struct net_device *dev) +--- a/net/dsa/port.c ++++ b/net/dsa/port.c +@@ -1076,7 +1076,7 @@ static void dsa_port_phylink_mac_link_up + speed, duplex, tx_pause, rx_pause); + } + +-const struct phylink_mac_ops dsa_port_phylink_mac_ops = { ++static const struct phylink_mac_ops dsa_port_phylink_mac_ops = { + .validate = dsa_port_phylink_validate, + .mac_pcs_get_state = dsa_port_phylink_mac_pcs_get_state, + .mac_config = dsa_port_phylink_mac_config, +@@ -1085,6 +1085,30 @@ const struct phylink_mac_ops dsa_port_ph + .mac_link_up = dsa_port_phylink_mac_link_up, + }; + ++int dsa_port_phylink_create(struct dsa_port *dp) ++{ ++ struct dsa_switch *ds = dp->ds; ++ phy_interface_t mode; ++ int err; ++ ++ err = of_get_phy_mode(dp->dn, &mode); ++ if (err) ++ mode = PHY_INTERFACE_MODE_NA; ++ ++ if (ds->ops->phylink_get_interfaces) ++ ds->ops->phylink_get_interfaces(ds, dp->index, ++ dp->pl_config.supported_interfaces); ++ ++ dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(dp->dn), ++ mode, &dsa_port_phylink_mac_ops); ++ if (IS_ERR(dp->pl)) { ++ pr_err("error creating PHYLINK: %ld\n", PTR_ERR(dp->pl)); ++ return PTR_ERR(dp->pl); ++ } ++ ++ return 0; ++} ++ + static int dsa_port_setup_phy_of(struct dsa_port *dp, bool enable) + { + struct dsa_switch *ds = dp->ds; +@@ -1161,27 +1185,15 @@ static int dsa_port_phylink_register(str + { + struct dsa_switch *ds = dp->ds; + struct device_node *port_dn = dp->dn; +- phy_interface_t mode; + int err; + +- err = of_get_phy_mode(port_dn, &mode); +- if (err) +- mode = PHY_INTERFACE_MODE_NA; +- + dp->pl_config.dev = ds->dev; + dp->pl_config.type = PHYLINK_DEV; + dp->pl_config.pcs_poll = ds->pcs_poll; + +- if (ds->ops->phylink_get_interfaces) +- ds->ops->phylink_get_interfaces(ds, dp->index, +- dp->pl_config.supported_interfaces); +- +- dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn), +- mode, &dsa_port_phylink_mac_ops); +- if (IS_ERR(dp->pl)) { +- pr_err("error creating PHYLINK: %ld\n", PTR_ERR(dp->pl)); +- return PTR_ERR(dp->pl); +- } ++ err = dsa_port_phylink_create(dp); ++ if (err) ++ return err; + + err = phylink_of_phy_connect(dp->pl, port_dn, 0); + if (err && err != -ENODEV) { +--- a/net/dsa/slave.c ++++ b/net/dsa/slave.c +@@ -1817,14 +1817,9 @@ static int dsa_slave_phy_setup(struct ne + struct dsa_port *dp = dsa_slave_to_port(slave_dev); + struct device_node *port_dn = dp->dn; + struct dsa_switch *ds = dp->ds; +- phy_interface_t mode; + u32 phy_flags = 0; + int ret; + +- ret = of_get_phy_mode(port_dn, &mode); +- if (ret) +- mode = PHY_INTERFACE_MODE_NA; +- + dp->pl_config.dev = &slave_dev->dev; + dp->pl_config.type = PHYLINK_NETDEV; + +@@ -1837,17 +1832,9 @@ static int dsa_slave_phy_setup(struct ne + dp->pl_config.poll_fixed_state = true; + } + +- if (ds->ops->phylink_get_interfaces) +- ds->ops->phylink_get_interfaces(ds, dp->index, +- dp->pl_config.supported_interfaces); +- +- dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(port_dn), mode, +- &dsa_port_phylink_mac_ops); +- if (IS_ERR(dp->pl)) { +- netdev_err(slave_dev, +- "error creating PHYLINK: %ld\n", PTR_ERR(dp->pl)); +- return PTR_ERR(dp->pl); +- } ++ ret = dsa_port_phylink_create(dp); ++ if (ret) ++ return ret; + + if (ds->ops->get_phy_flags) + phy_flags = ds->ops->get_phy_flags(ds, dp->index); diff --git a/target/linux/generic/backport-5.15/703-05-v5.17-net-dsa-replace-phylink_get_interfaces-with-phylink_.patch b/target/linux/generic/backport-5.15/703-05-v5.17-net-dsa-replace-phylink_get_interfaces-with-phylink_.patch new file mode 100644 index 0000000000..4cea5994da --- /dev/null +++ b/target/linux/generic/backport-5.15/703-05-v5.17-net-dsa-replace-phylink_get_interfaces-with-phylink_.patch @@ -0,0 +1,51 @@ +From 072eea6c22b2af680c3949e64f9adde278c71e68 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Tue, 30 Nov 2021 13:10:01 +0000 +Subject: [PATCH] net: dsa: replace phylink_get_interfaces() with + phylink_get_caps() +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Phylink needs slightly more information than phylink_get_interfaces() +allows us to get from the DSA drivers - we need the MAC capabilities. +Replace the phylink_get_interfaces() method with phylink_get_caps() to +allow DSA drivers to fill in the phylink_config MAC capabilities field +as well. + +Signed-off-by: Russell King (Oracle) +Reviewed-by: Marek Behún +Reviewed-by: Andrew Lunn +Signed-off-by: Jakub Kicinski +--- + include/net/dsa.h | 4 ++-- + net/dsa/port.c | 5 ++--- + 2 files changed, 4 insertions(+), 5 deletions(-) + +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -626,8 +626,8 @@ struct dsa_switch_ops { + /* + * PHYLINK integration + */ +- void (*phylink_get_interfaces)(struct dsa_switch *ds, int port, +- unsigned long *supported_interfaces); ++ void (*phylink_get_caps)(struct dsa_switch *ds, int port, ++ struct phylink_config *config); + void (*phylink_validate)(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state); +--- a/net/dsa/port.c ++++ b/net/dsa/port.c +@@ -1095,9 +1095,8 @@ int dsa_port_phylink_create(struct dsa_p + if (err) + mode = PHY_INTERFACE_MODE_NA; + +- if (ds->ops->phylink_get_interfaces) +- ds->ops->phylink_get_interfaces(ds, dp->index, +- dp->pl_config.supported_interfaces); ++ if (ds->ops->phylink_get_caps) ++ ds->ops->phylink_get_caps(ds, dp->index, &dp->pl_config); + + dp->pl = phylink_create(&dp->pl_config, of_fwnode_handle(dp->dn), + mode, &dsa_port_phylink_mac_ops); diff --git a/target/linux/generic/backport-5.15/703-06-v5.18-net-dsa-add-support-for-phylink-mac_select_pcs.patch b/target/linux/generic/backport-5.15/703-06-v5.18-net-dsa-add-support-for-phylink-mac_select_pcs.patch new file mode 100644 index 0000000000..a28d14d27a --- /dev/null +++ b/target/linux/generic/backport-5.15/703-06-v5.18-net-dsa-add-support-for-phylink-mac_select_pcs.patch @@ -0,0 +1,59 @@ +From bde018222c6b084ac32933a9f933581dd83da18e Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Thu, 17 Feb 2022 18:30:35 +0000 +Subject: [PATCH] net: dsa: add support for phylink mac_select_pcs() + +Add DSA support for the phylink mac_select_pcs() method so DSA drivers +can return provide phylink with the appropriate PCS for the PHY +interface mode. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + include/net/dsa.h | 3 +++ + net/dsa/port.c | 15 +++++++++++++++ + 2 files changed, 18 insertions(+) + +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -631,6 +631,9 @@ struct dsa_switch_ops { + void (*phylink_validate)(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state); ++ struct phylink_pcs *(*phylink_mac_select_pcs)(struct dsa_switch *ds, ++ int port, ++ phy_interface_t iface); + int (*phylink_mac_link_state)(struct dsa_switch *ds, int port, + struct phylink_link_state *state); + void (*phylink_mac_config)(struct dsa_switch *ds, int port, +--- a/net/dsa/port.c ++++ b/net/dsa/port.c +@@ -1012,6 +1012,20 @@ static void dsa_port_phylink_mac_pcs_get + } + } + ++static struct phylink_pcs * ++dsa_port_phylink_mac_select_pcs(struct phylink_config *config, ++ phy_interface_t interface) ++{ ++ struct dsa_port *dp = container_of(config, struct dsa_port, pl_config); ++ struct dsa_switch *ds = dp->ds; ++ struct phylink_pcs *pcs = NULL; ++ ++ if (ds->ops->phylink_mac_select_pcs) ++ pcs = ds->ops->phylink_mac_select_pcs(ds, dp->index, interface); ++ ++ return pcs; ++} ++ + static void dsa_port_phylink_mac_config(struct phylink_config *config, + unsigned int mode, + const struct phylink_link_state *state) +@@ -1078,6 +1092,7 @@ static void dsa_port_phylink_mac_link_up + + static const struct phylink_mac_ops dsa_port_phylink_mac_ops = { + .validate = dsa_port_phylink_validate, ++ .mac_select_pcs = dsa_port_phylink_mac_select_pcs, + .mac_pcs_get_state = dsa_port_phylink_mac_pcs_get_state, + .mac_config = dsa_port_phylink_mac_config, + .mac_an_restart = dsa_port_phylink_mac_an_restart, diff --git a/target/linux/generic/backport-5.15/703-07-v5.16-net-phy-add-phy_interface_t-bitmap-support.patch b/target/linux/generic/backport-5.15/703-07-v5.16-net-phy-add-phy_interface_t-bitmap-support.patch new file mode 100644 index 0000000000..1a7817b0f9 --- /dev/null +++ b/target/linux/generic/backport-5.15/703-07-v5.16-net-phy-add-phy_interface_t-bitmap-support.patch @@ -0,0 +1,61 @@ +From 8e20f591f204f8db7f1182918f8e2285d3f589e0 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Tue, 26 Oct 2021 11:06:01 +0100 +Subject: [PATCH] net: phy: add phy_interface_t bitmap support + +Add support for a bitmap for phy interface modes, which includes: +- a macro to declare the interface bitmap +- an inline helper to zero the interface bitmap +- an inline helper to detect an empty interface bitmap +- inline helpers to do a bitwise AND and OR operations on two interface + bitmaps + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + include/linux/phy.h | 34 ++++++++++++++++++++++++++++++++++ + 1 file changed, 34 insertions(+) + +--- a/include/linux/phy.h ++++ b/include/linux/phy.h +@@ -155,6 +155,40 @@ typedef enum { + PHY_INTERFACE_MODE_MAX, + } phy_interface_t; + ++/* PHY interface mode bitmap handling */ ++#define DECLARE_PHY_INTERFACE_MASK(name) \ ++ DECLARE_BITMAP(name, PHY_INTERFACE_MODE_MAX) ++ ++static inline void phy_interface_zero(unsigned long *intf) ++{ ++ bitmap_zero(intf, PHY_INTERFACE_MODE_MAX); ++} ++ ++static inline bool phy_interface_empty(const unsigned long *intf) ++{ ++ return bitmap_empty(intf, PHY_INTERFACE_MODE_MAX); ++} ++ ++static inline void phy_interface_and(unsigned long *dst, const unsigned long *a, ++ const unsigned long *b) ++{ ++ bitmap_and(dst, a, b, PHY_INTERFACE_MODE_MAX); ++} ++ ++static inline void phy_interface_or(unsigned long *dst, const unsigned long *a, ++ const unsigned long *b) ++{ ++ bitmap_or(dst, a, b, PHY_INTERFACE_MODE_MAX); ++} ++ ++static inline void phy_interface_set_rgmii(unsigned long *intf) ++{ ++ __set_bit(PHY_INTERFACE_MODE_RGMII, intf); ++ __set_bit(PHY_INTERFACE_MODE_RGMII_ID, intf); ++ __set_bit(PHY_INTERFACE_MODE_RGMII_RXID, intf); ++ __set_bit(PHY_INTERFACE_MODE_RGMII_TXID, intf); ++} ++ + /* + * phy_supported_speeds - return all speeds currently supported by a PHY device + */ diff --git a/target/linux/generic/backport-5.15/703-08-v5.17-net-phylink-add-mac_select_pcs-method-to-phylink_mac.patch b/target/linux/generic/backport-5.15/703-08-v5.17-net-phylink-add-mac_select_pcs-method-to-phylink_mac.patch new file mode 100644 index 0000000000..e1cfc3f439 --- /dev/null +++ b/target/linux/generic/backport-5.15/703-08-v5.17-net-phylink-add-mac_select_pcs-method-to-phylink_mac.patch @@ -0,0 +1,197 @@ +From d1e86325af377129adb7fc6f34eb044ca6068b47 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 15 Dec 2021 15:34:15 +0000 +Subject: [PATCH] net: phylink: add mac_select_pcs() method to phylink_mac_ops + +mac_select_pcs() allows us to have an explicit point to query which +PCS the MAC wishes to use for a particular PHY interface mode, thereby +allowing us to add support to validate the link settings with the PCS. + +Phylink will also use this to select the PCS to be used during a major +configuration event without the MAC driver needing to call +phylink_set_pcs(). + +Note that if mac_select_pcs() is present, the supported_interfaces +bitmap must be filled in; this avoids mac_select_pcs() being called +with PHY_INTERFACE_MODE_NA when we want to get support for all +interface types. Phylink will return an error in phylink_create() +unless this condition is satisfied. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/phy/phylink.c | 68 +++++++++++++++++++++++++++++++++------ + include/linux/phylink.h | 18 +++++++++++ + 2 files changed, 77 insertions(+), 9 deletions(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -155,6 +155,23 @@ static const char *phylink_an_mode_str(u + return mode < ARRAY_SIZE(modestr) ? modestr[mode] : "unknown"; + } + ++static int phylink_validate_mac_and_pcs(struct phylink *pl, ++ unsigned long *supported, ++ struct phylink_link_state *state) ++{ ++ struct phylink_pcs *pcs; ++ ++ if (pl->mac_ops->mac_select_pcs) { ++ pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface); ++ if (IS_ERR(pcs)) ++ return PTR_ERR(pcs); ++ } ++ ++ pl->mac_ops->validate(pl->config, supported, state); ++ ++ return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; ++} ++ + static int phylink_validate_any(struct phylink *pl, unsigned long *supported, + struct phylink_link_state *state) + { +@@ -170,9 +187,10 @@ static int phylink_validate_any(struct p + + t = *state; + t.interface = intf; +- pl->mac_ops->validate(pl->config, s, &t); +- linkmode_or(all_s, all_s, s); +- linkmode_or(all_adv, all_adv, t.advertising); ++ if (!phylink_validate_mac_and_pcs(pl, s, &t)) { ++ linkmode_or(all_s, all_s, s); ++ linkmode_or(all_adv, all_adv, t.advertising); ++ } + } + } + +@@ -194,9 +212,7 @@ static int phylink_validate(struct phyli + return -EINVAL; + } + +- pl->mac_ops->validate(pl->config, supported, state); +- +- return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; ++ return phylink_validate_mac_and_pcs(pl, supported, state); + } + + static int phylink_parse_fixedlink(struct phylink *pl, +@@ -486,10 +502,21 @@ static void phylink_mac_pcs_an_restart(s + static void phylink_major_config(struct phylink *pl, bool restart, + const struct phylink_link_state *state) + { ++ struct phylink_pcs *pcs = NULL; + int err; + + phylink_dbg(pl, "major config %s\n", phy_modes(state->interface)); + ++ if (pl->mac_ops->mac_select_pcs) { ++ pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface); ++ if (IS_ERR(pcs)) { ++ phylink_err(pl, ++ "mac_select_pcs unexpectedly failed: %pe\n", ++ pcs); ++ return; ++ } ++ } ++ + if (pl->mac_ops->mac_prepare) { + err = pl->mac_ops->mac_prepare(pl->config, pl->cur_link_an_mode, + state->interface); +@@ -500,6 +527,12 @@ static void phylink_major_config(struct + } + } + ++ /* If we have a new PCS, switch to the new PCS after preparing the MAC ++ * for the change. ++ */ ++ if (pcs) ++ phylink_set_pcs(pl, pcs); ++ + phylink_mac_config(pl, state); + + if (pl->pcs_ops) { +@@ -879,6 +912,14 @@ struct phylink *phylink_create(struct ph + struct phylink *pl; + int ret; + ++ /* Validate the supplied configuration */ ++ if (mac_ops->mac_select_pcs && ++ phy_interface_empty(config->supported_interfaces)) { ++ dev_err(config->dev, ++ "phylink: error: empty supported_interfaces but mac_select_pcs() method present\n"); ++ return ERR_PTR(-EINVAL); ++ } ++ + pl = kzalloc(sizeof(*pl), GFP_KERNEL); + if (!pl) + return ERR_PTR(-ENOMEM); +@@ -946,9 +987,10 @@ EXPORT_SYMBOL_GPL(phylink_create); + * @pl: a pointer to a &struct phylink returned from phylink_create() + * @pcs: a pointer to the &struct phylink_pcs + * +- * Bind the MAC PCS to phylink. This may be called after phylink_create(), +- * in mac_prepare() or mac_config() methods if it is desired to dynamically +- * change the PCS. ++ * Bind the MAC PCS to phylink. This may be called after phylink_create(). ++ * If it is desired to dynamically change the PCS, then the preferred method ++ * is to use mac_select_pcs(), but it may also be called in mac_prepare() ++ * or mac_config(). + * + * Please note that there are behavioural changes with the mac_config() + * callback if a PCS is present (denoting a newer setup) so removing a PCS +@@ -959,6 +1001,14 @@ void phylink_set_pcs(struct phylink *pl, + { + pl->pcs = pcs; + pl->pcs_ops = pcs->ops; ++ ++ if (!pl->phylink_disable_state && ++ pl->cfg_link_an_mode == MLO_AN_INBAND) { ++ if (pl->config->pcs_poll || pcs->poll) ++ mod_timer(&pl->link_poll, jiffies + HZ); ++ else ++ del_timer(&pl->link_poll); ++ } + } + EXPORT_SYMBOL_GPL(phylink_set_pcs); + +--- a/include/linux/phylink.h ++++ b/include/linux/phylink.h +@@ -84,6 +84,7 @@ struct phylink_config { + /** + * struct phylink_mac_ops - MAC operations structure. + * @validate: Validate and update the link configuration. ++ * @mac_select_pcs: Select a PCS for the interface mode. + * @mac_pcs_get_state: Read the current link state from the hardware. + * @mac_prepare: prepare for a major reconfiguration of the interface. + * @mac_config: configure the MAC for the selected mode and state. +@@ -98,6 +99,8 @@ struct phylink_mac_ops { + void (*validate)(struct phylink_config *config, + unsigned long *supported, + struct phylink_link_state *state); ++ struct phylink_pcs *(*mac_select_pcs)(struct phylink_config *config, ++ phy_interface_t interface); + void (*mac_pcs_get_state)(struct phylink_config *config, + struct phylink_link_state *state); + int (*mac_prepare)(struct phylink_config *config, unsigned int mode, +@@ -150,6 +153,21 @@ struct phylink_mac_ops { + */ + void validate(struct phylink_config *config, unsigned long *supported, + struct phylink_link_state *state); ++/** ++ * mac_select_pcs: Select a PCS for the interface mode. ++ * @config: a pointer to a &struct phylink_config. ++ * @interface: PHY interface mode for PCS ++ * ++ * Return the &struct phylink_pcs for the specified interface mode, or ++ * NULL if none is required, or an error pointer on error. ++ * ++ * This must not modify any state. It is used to query which PCS should ++ * be used. Phylink will use this during validation to ensure that the ++ * configuration is valid, and when setting a configuration to internally ++ * set the PCS that will be used. ++ */ ++struct phylink_pcs *mac_select_pcs(struct phylink_config *config, ++ phy_interface_t interface); + + /** + * mac_pcs_get_state() - Read the current inband link state from the hardware diff --git a/target/linux/generic/backport-5.15/703-09-v5.17-net-phylink-add-generic-validate-implementation.patch b/target/linux/generic/backport-5.15/703-09-v5.17-net-phylink-add-generic-validate-implementation.patch new file mode 100644 index 0000000000..73c8b414da --- /dev/null +++ b/target/linux/generic/backport-5.15/703-09-v5.17-net-phylink-add-generic-validate-implementation.patch @@ -0,0 +1,341 @@ +From 34ae2c09d46a2d0abd907e139b466f798e4095a8 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 15 Nov 2021 10:00:27 +0000 +Subject: [PATCH] net: phylink: add generic validate implementation + +Add a generic validate() implementation using the supported_interfaces +and a bitmask of MAC pause/speed/duplex capabilities. This allows us +to entirely eliminate many driver private validate() implementations. + +We expose the underlying phylink_get_linkmodes() function so that +drivers which have special needs can still benefit from conversion. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/phy/phylink.c | 252 ++++++++++++++++++++++++++++++++++++++ + include/linux/phylink.h | 31 +++++ + 2 files changed, 283 insertions(+) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -172,6 +172,258 @@ static int phylink_validate_mac_and_pcs( + return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; + } + ++static void phylink_caps_to_linkmodes(unsigned long *linkmodes, ++ unsigned long caps) ++{ ++ if (caps & MAC_SYM_PAUSE) ++ __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, linkmodes); ++ ++ if (caps & MAC_ASYM_PAUSE) ++ __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, linkmodes); ++ ++ if (caps & MAC_10HD) ++ __set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT, linkmodes); ++ ++ if (caps & MAC_10FD) ++ __set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT, linkmodes); ++ ++ if (caps & MAC_100HD) { ++ __set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100baseFX_Half_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_100FD) { ++ __set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100baseT1_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100baseFX_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_1000HD) ++ __set_bit(ETHTOOL_LINK_MODE_1000baseT_Half_BIT, linkmodes); ++ ++ if (caps & MAC_1000FD) { ++ __set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_1000baseX_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_1000baseT1_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_2500FD) { ++ __set_bit(ETHTOOL_LINK_MODE_2500baseT_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_2500baseX_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_5000FD) ++ __set_bit(ETHTOOL_LINK_MODE_5000baseT_Full_BIT, linkmodes); ++ ++ if (caps & MAC_10000FD) { ++ __set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_10000baseR_FEC_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_10000baseCR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_25000FD) { ++ __set_bit(ETHTOOL_LINK_MODE_25000baseCR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_25000baseKR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_25000baseSR_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_40000FD) { ++ __set_bit(ETHTOOL_LINK_MODE_40000baseKR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_40000baseCR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_40000baseSR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_40000baseLR4_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_50000FD) { ++ __set_bit(ETHTOOL_LINK_MODE_50000baseCR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_50000baseKR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_50000baseKR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_50000baseSR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_50000baseCR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_50000baseLR_ER_FR_Full_BIT, ++ linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_50000baseDR_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_56000FD) { ++ __set_bit(ETHTOOL_LINK_MODE_56000baseKR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_56000baseCR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_56000baseSR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_56000baseLR4_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_100000FD) { ++ __set_bit(ETHTOOL_LINK_MODE_100000baseKR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT, ++ linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseKR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseSR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseCR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseLR2_ER2_FR2_Full_BIT, ++ linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseDR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseKR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseSR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseLR_ER_FR_Full_BIT, ++ linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseCR_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_100000baseDR_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_200000FD) { ++ __set_bit(ETHTOOL_LINK_MODE_200000baseKR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_200000baseSR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_200000baseLR4_ER4_FR4_Full_BIT, ++ linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_200000baseDR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_200000baseCR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_200000baseKR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_200000baseSR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_200000baseLR2_ER2_FR2_Full_BIT, ++ linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_200000baseDR2_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_200000baseCR2_Full_BIT, linkmodes); ++ } ++ ++ if (caps & MAC_400000FD) { ++ __set_bit(ETHTOOL_LINK_MODE_400000baseKR8_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_400000baseSR8_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_400000baseLR8_ER8_FR8_Full_BIT, ++ linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_400000baseDR8_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_400000baseCR8_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_400000baseKR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_400000baseSR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_400000baseLR4_ER4_FR4_Full_BIT, ++ linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_400000baseDR4_Full_BIT, linkmodes); ++ __set_bit(ETHTOOL_LINK_MODE_400000baseCR4_Full_BIT, linkmodes); ++ } ++} ++ ++/** ++ * phylink_get_linkmodes() - get acceptable link modes ++ * @linkmodes: ethtool linkmode mask (must be already initialised) ++ * @interface: phy interface mode defined by &typedef phy_interface_t ++ * @mac_capabilities: bitmask of MAC capabilities ++ * ++ * Set all possible pause, speed and duplex linkmodes in @linkmodes that ++ * are supported by the @interface mode and @mac_capabilities. @linkmodes ++ * must have been initialised previously. ++ */ ++void phylink_get_linkmodes(unsigned long *linkmodes, phy_interface_t interface, ++ unsigned long mac_capabilities) ++{ ++ unsigned long caps = MAC_SYM_PAUSE | MAC_ASYM_PAUSE; ++ ++ switch (interface) { ++ case PHY_INTERFACE_MODE_USXGMII: ++ caps |= MAC_10000FD | MAC_5000FD | MAC_2500FD; ++ fallthrough; ++ ++ case PHY_INTERFACE_MODE_RGMII_TXID: ++ case PHY_INTERFACE_MODE_RGMII_RXID: ++ case PHY_INTERFACE_MODE_RGMII_ID: ++ case PHY_INTERFACE_MODE_RGMII: ++ case PHY_INTERFACE_MODE_QSGMII: ++ case PHY_INTERFACE_MODE_SGMII: ++ case PHY_INTERFACE_MODE_GMII: ++ caps |= MAC_1000HD | MAC_1000FD; ++ fallthrough; ++ ++ case PHY_INTERFACE_MODE_REVRMII: ++ case PHY_INTERFACE_MODE_RMII: ++ case PHY_INTERFACE_MODE_REVMII: ++ case PHY_INTERFACE_MODE_MII: ++ caps |= MAC_10HD | MAC_10FD; ++ fallthrough; ++ ++ case PHY_INTERFACE_MODE_100BASEX: ++ caps |= MAC_100HD | MAC_100FD; ++ break; ++ ++ case PHY_INTERFACE_MODE_TBI: ++ case PHY_INTERFACE_MODE_MOCA: ++ case PHY_INTERFACE_MODE_RTBI: ++ case PHY_INTERFACE_MODE_1000BASEX: ++ caps |= MAC_1000HD; ++ fallthrough; ++ case PHY_INTERFACE_MODE_TRGMII: ++ caps |= MAC_1000FD; ++ break; ++ ++ case PHY_INTERFACE_MODE_2500BASEX: ++ caps |= MAC_2500FD; ++ break; ++ ++ case PHY_INTERFACE_MODE_5GBASER: ++ caps |= MAC_5000FD; ++ break; ++ ++ case PHY_INTERFACE_MODE_XGMII: ++ case PHY_INTERFACE_MODE_RXAUI: ++ case PHY_INTERFACE_MODE_XAUI: ++ case PHY_INTERFACE_MODE_10GBASER: ++ case PHY_INTERFACE_MODE_10GKR: ++ caps |= MAC_10000FD; ++ break; ++ ++ case PHY_INTERFACE_MODE_25GBASER: ++ caps |= MAC_25000FD; ++ break; ++ ++ case PHY_INTERFACE_MODE_XLGMII: ++ caps |= MAC_40000FD; ++ break; ++ ++ case PHY_INTERFACE_MODE_INTERNAL: ++ caps |= ~0; ++ break; ++ ++ case PHY_INTERFACE_MODE_NA: ++ case PHY_INTERFACE_MODE_MAX: ++ case PHY_INTERFACE_MODE_SMII: ++ break; ++ } ++ ++ phylink_caps_to_linkmodes(linkmodes, caps & mac_capabilities); ++} ++EXPORT_SYMBOL_GPL(phylink_get_linkmodes); ++ ++/** ++ * phylink_generic_validate() - generic validate() callback implementation ++ * @config: a pointer to a &struct phylink_config. ++ * @supported: ethtool bitmask for supported link modes. ++ * @state: a pointer to a &struct phylink_link_state. ++ * ++ * Generic implementation of the validate() callback that MAC drivers can ++ * use when they pass the range of supported interfaces and MAC capabilities. ++ * This makes use of phylink_get_linkmodes(). ++ */ ++void phylink_generic_validate(struct phylink_config *config, ++ unsigned long *supported, ++ struct phylink_link_state *state) ++{ ++ __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; ++ ++ phylink_set_port_modes(mask); ++ phylink_set(mask, Autoneg); ++ phylink_get_linkmodes(mask, state->interface, config->mac_capabilities); ++ ++ linkmode_and(supported, supported, mask); ++ linkmode_and(state->advertising, state->advertising, mask); ++} ++EXPORT_SYMBOL_GPL(phylink_generic_validate); ++ + static int phylink_validate_any(struct phylink *pl, unsigned long *supported, + struct phylink_link_state *state) + { +--- a/include/linux/phylink.h ++++ b/include/linux/phylink.h +@@ -20,6 +20,29 @@ enum { + MLO_AN_PHY = 0, /* Conventional PHY */ + MLO_AN_FIXED, /* Fixed-link mode */ + MLO_AN_INBAND, /* In-band protocol */ ++ ++ MAC_SYM_PAUSE = BIT(0), ++ MAC_ASYM_PAUSE = BIT(1), ++ MAC_10HD = BIT(2), ++ MAC_10FD = BIT(3), ++ MAC_10 = MAC_10HD | MAC_10FD, ++ MAC_100HD = BIT(4), ++ MAC_100FD = BIT(5), ++ MAC_100 = MAC_100HD | MAC_100FD, ++ MAC_1000HD = BIT(6), ++ MAC_1000FD = BIT(7), ++ MAC_1000 = MAC_1000HD | MAC_1000FD, ++ MAC_2500FD = BIT(8), ++ MAC_5000FD = BIT(9), ++ MAC_10000FD = BIT(10), ++ MAC_20000FD = BIT(11), ++ MAC_25000FD = BIT(12), ++ MAC_40000FD = BIT(13), ++ MAC_50000FD = BIT(14), ++ MAC_56000FD = BIT(15), ++ MAC_100000FD = BIT(16), ++ MAC_200000FD = BIT(17), ++ MAC_400000FD = BIT(18), + }; + + static inline bool phylink_autoneg_inband(unsigned int mode) +@@ -69,6 +92,7 @@ enum phylink_op_type { + * if MAC link is at %MLO_AN_FIXED mode. + * @supported_interfaces: bitmap describing which PHY_INTERFACE_MODE_xxx + * are supported by the MAC/PCS. ++ * @mac_capabilities: MAC pause/speed/duplex capabilities. + */ + struct phylink_config { + struct device *dev; +@@ -79,6 +103,7 @@ struct phylink_config { + void (*get_fixed_state)(struct phylink_config *config, + struct phylink_link_state *state); + DECLARE_PHY_INTERFACE_MASK(supported_interfaces); ++ unsigned long mac_capabilities; + }; + + /** +@@ -460,6 +485,12 @@ void pcs_link_up(struct phylink_pcs *pcs + phy_interface_t interface, int speed, int duplex); + #endif + ++void phylink_get_linkmodes(unsigned long *linkmodes, phy_interface_t interface, ++ unsigned long mac_capabilities); ++void phylink_generic_validate(struct phylink_config *config, ++ unsigned long *supported, ++ struct phylink_link_state *state); ++ + struct phylink *phylink_create(struct phylink_config *, struct fwnode_handle *, + phy_interface_t iface, + const struct phylink_mac_ops *mac_ops); diff --git a/target/linux/generic/backport-5.15/703-10-v5.16-net-dsa-introduce-helpers-for-iterating-through-port.patch b/target/linux/generic/backport-5.15/703-10-v5.16-net-dsa-introduce-helpers-for-iterating-through-port.patch new file mode 100644 index 0000000000..a55623519c --- /dev/null +++ b/target/linux/generic/backport-5.15/703-10-v5.16-net-dsa-introduce-helpers-for-iterating-through-port.patch @@ -0,0 +1,68 @@ +From 82b318983c515f29b8b3a0dad9f6a5fe8a68a7f4 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Wed, 20 Oct 2021 20:49:49 +0300 +Subject: [PATCH] net: dsa: introduce helpers for iterating through ports using + dp + +Since the DSA conversion from the ds->ports array into the dst->ports +list, the DSA API has encouraged driver writers, as well as the core +itself, to write inefficient code. + +Currently, code that wants to filter by a specific type of port when +iterating, like {!unused, user, cpu, dsa}, uses the dsa_is_*_port helper. +Under the hood, this uses dsa_to_port which iterates again through +dst->ports. But the driver iterates through the port list already, so +the complexity is quadratic for the typical case of a single-switch +tree. + +This patch introduces some iteration helpers where the iterator is +already a struct dsa_port *dp, so that the other variant of the +filtering functions, dsa_port_is_{unused,user,cpu_dsa}, can be used +directly on the iterator. This eliminates the second lookup. + +These functions can be used both by the core and by drivers. + +Signed-off-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: David S. Miller +--- + include/net/dsa.h | 28 ++++++++++++++++++++++++++++ + 1 file changed, 28 insertions(+) + +--- a/include/net/dsa.h ++++ b/include/net/dsa.h +@@ -476,6 +476,34 @@ static inline bool dsa_is_user_port(stru + return dsa_to_port(ds, p)->type == DSA_PORT_TYPE_USER; + } + ++#define dsa_tree_for_each_user_port(_dp, _dst) \ ++ list_for_each_entry((_dp), &(_dst)->ports, list) \ ++ if (dsa_port_is_user((_dp))) ++ ++#define dsa_switch_for_each_port(_dp, _ds) \ ++ list_for_each_entry((_dp), &(_ds)->dst->ports, list) \ ++ if ((_dp)->ds == (_ds)) ++ ++#define dsa_switch_for_each_port_safe(_dp, _next, _ds) \ ++ list_for_each_entry_safe((_dp), (_next), &(_ds)->dst->ports, list) \ ++ if ((_dp)->ds == (_ds)) ++ ++#define dsa_switch_for_each_port_continue_reverse(_dp, _ds) \ ++ list_for_each_entry_continue_reverse((_dp), &(_ds)->dst->ports, list) \ ++ if ((_dp)->ds == (_ds)) ++ ++#define dsa_switch_for_each_available_port(_dp, _ds) \ ++ dsa_switch_for_each_port((_dp), (_ds)) \ ++ if (!dsa_port_is_unused((_dp))) ++ ++#define dsa_switch_for_each_user_port(_dp, _ds) \ ++ dsa_switch_for_each_port((_dp), (_ds)) \ ++ if (dsa_port_is_user((_dp))) ++ ++#define dsa_switch_for_each_cpu_port(_dp, _ds) \ ++ dsa_switch_for_each_port((_dp), (_ds)) \ ++ if (dsa_port_is_cpu((_dp))) ++ + static inline u32 dsa_user_ports(struct dsa_switch *ds) + { + u32 mask = 0; diff --git a/target/linux/generic/backport-5.15/703-11-v5.17-net-phylink-add-pcs_validate-method.patch b/target/linux/generic/backport-5.15/703-11-v5.17-net-phylink-add-pcs_validate-method.patch new file mode 100644 index 0000000000..add2e6e352 --- /dev/null +++ b/target/linux/generic/backport-5.15/703-11-v5.17-net-phylink-add-pcs_validate-method.patch @@ -0,0 +1,106 @@ +From 0d22d4b626a4eaa3196019092eb6c1919e9f8caa Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 15 Dec 2021 15:34:20 +0000 +Subject: [PATCH] net: phylink: add pcs_validate() method + +Add a hook for PCS to validate the link parameters. This avoids MAC +drivers having to have knowledge of their PCS in their validate() +method, thereby allowing several MAC drivers to be simplfied. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/phy/phylink.c | 31 +++++++++++++++++++++++++++++++ + include/linux/phylink.h | 20 ++++++++++++++++++++ + 2 files changed, 51 insertions(+) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -160,13 +160,44 @@ static int phylink_validate_mac_and_pcs( + struct phylink_link_state *state) + { + struct phylink_pcs *pcs; ++ int ret; + ++ /* Get the PCS for this interface mode */ + if (pl->mac_ops->mac_select_pcs) { + pcs = pl->mac_ops->mac_select_pcs(pl->config, state->interface); + if (IS_ERR(pcs)) + return PTR_ERR(pcs); ++ } else { ++ pcs = pl->pcs; + } + ++ if (pcs) { ++ /* The PCS, if present, must be setup before phylink_create() ++ * has been called. If the ops is not initialised, print an ++ * error and backtrace rather than oopsing the kernel. ++ */ ++ if (!pcs->ops) { ++ phylink_err(pl, "interface %s: uninitialised PCS\n", ++ phy_modes(state->interface)); ++ dump_stack(); ++ return -EINVAL; ++ } ++ ++ /* Validate the link parameters with the PCS */ ++ if (pcs->ops->pcs_validate) { ++ ret = pcs->ops->pcs_validate(pcs, supported, state); ++ if (ret < 0 || phylink_is_empty_linkmode(supported)) ++ return -EINVAL; ++ ++ /* Ensure the advertising mask is a subset of the ++ * supported mask. ++ */ ++ linkmode_and(state->advertising, state->advertising, ++ supported); ++ } ++ } ++ ++ /* Then validate the link parameters with the MAC */ + pl->mac_ops->validate(pl->config, supported, state); + + return phylink_is_empty_linkmode(supported) ? -EINVAL : 0; +--- a/include/linux/phylink.h ++++ b/include/linux/phylink.h +@@ -396,6 +396,7 @@ struct phylink_pcs { + + /** + * struct phylink_pcs_ops - MAC PCS operations structure. ++ * @pcs_validate: validate the link configuration. + * @pcs_get_state: read the current MAC PCS link state from the hardware. + * @pcs_config: configure the MAC PCS for the selected mode and state. + * @pcs_an_restart: restart 802.3z BaseX autonegotiation. +@@ -403,6 +404,8 @@ struct phylink_pcs { + * (where necessary). + */ + struct phylink_pcs_ops { ++ int (*pcs_validate)(struct phylink_pcs *pcs, unsigned long *supported, ++ const struct phylink_link_state *state); + void (*pcs_get_state)(struct phylink_pcs *pcs, + struct phylink_link_state *state); + int (*pcs_config)(struct phylink_pcs *pcs, unsigned int mode, +@@ -416,6 +419,23 @@ struct phylink_pcs_ops { + + #if 0 /* For kernel-doc purposes only. */ + /** ++ * pcs_validate() - validate the link configuration. ++ * @pcs: a pointer to a &struct phylink_pcs. ++ * @supported: ethtool bitmask for supported link modes. ++ * @state: a const pointer to a &struct phylink_link_state. ++ * ++ * Validate the interface mode, and advertising's autoneg bit, removing any ++ * media ethtool link modes that would not be supportable from the supported ++ * mask. Phylink will propagate the changes to the advertising mask. See the ++ * &struct phylink_mac_ops validate() method. ++ * ++ * Returns -EINVAL if the interface mode/autoneg mode is not supported. ++ * Returns non-zero positive if the link state can be supported. ++ */ ++int pcs_validate(struct phylink_pcs *pcs, unsigned long *supported, ++ const struct phylink_link_state *state); ++ ++/** + * pcs_get_state() - Read the current inband link state from the hardware + * @pcs: a pointer to a &struct phylink_pcs. + * @state: a pointer to a &struct phylink_link_state. diff --git a/target/linux/generic/backport-5.15/703-12-v5.17-net-phylink-add-legacy_pre_march2020-indicator.patch b/target/linux/generic/backport-5.15/703-12-v5.17-net-phylink-add-legacy_pre_march2020-indicator.patch new file mode 100644 index 0000000000..6fbde12507 --- /dev/null +++ b/target/linux/generic/backport-5.15/703-12-v5.17-net-phylink-add-legacy_pre_march2020-indicator.patch @@ -0,0 +1,43 @@ +From 3e5b1feccea7db576353ffc302f78d522e4116e6 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Thu, 9 Dec 2021 13:11:32 +0000 +Subject: [PATCH] net: phylink: add legacy_pre_march2020 indicator + +Add a boolean to phylink_config to indicate whether a driver has not +been updated for the changes in commit 7cceb599d15d ("net: phylink: +avoid mac_config calls"), and thus are reliant on the old behaviour. + +We were currently keying the phylink behaviour on the presence of a +PCS, but this is sub-optimal for modern drivers that may not have a +PCS. + +This commit merely introduces the new flag, but does not add any use, +since we need all legacy drivers to set this flag before it can be +used. Once these legacy drivers have been updated, we can remove this +flag. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + include/linux/phylink.h | 3 +++ + 1 file changed, 3 insertions(+) + +--- a/include/linux/phylink.h ++++ b/include/linux/phylink.h +@@ -84,6 +84,8 @@ enum phylink_op_type { + * struct phylink_config - PHYLINK configuration structure + * @dev: a pointer to a struct device associated with the MAC + * @type: operation type of PHYLINK instance ++ * @legacy_pre_march2020: driver has not been updated for March 2020 updates ++ * (See commit 7cceb599d15d ("net: phylink: avoid mac_config calls") + * @pcs_poll: MAC PCS cannot provide link change interrupt + * @poll_fixed_state: if true, starts link_poll, + * if MAC link is at %MLO_AN_FIXED mode. +@@ -97,6 +99,7 @@ enum phylink_op_type { + struct phylink_config { + struct device *dev; + enum phylink_op_type type; ++ bool legacy_pre_march2020; + bool pcs_poll; + bool poll_fixed_state; + bool ovr_an_inband; diff --git a/target/linux/generic/backport-5.15/703-13-v5.17-net-dsa-mark-DSA-phylink-as-legacy_pre_march2020.patch b/target/linux/generic/backport-5.15/703-13-v5.17-net-dsa-mark-DSA-phylink-as-legacy_pre_march2020.patch new file mode 100644 index 0000000000..dff0db5db6 --- /dev/null +++ b/target/linux/generic/backport-5.15/703-13-v5.17-net-dsa-mark-DSA-phylink-as-legacy_pre_march2020.patch @@ -0,0 +1,36 @@ +From 0a9f0794d9bd67e590a9488afe87fbb0419d9539 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Thu, 9 Dec 2021 13:11:38 +0000 +Subject: [PATCH] net: dsa: mark DSA phylink as legacy_pre_march2020 + +The majority of DSA drivers do not make use of the PCS support, and +thus operate in legacy mode. In order to preserve this behaviour in +future, we need to set the legacy_pre_march2020 flag so phylink knows +this may require the legacy calls. + +There are some DSA drivers that do make use of PCS support, and these +will continue operating as before - legacy_pre_march2020 will not +prevent split-PCS support enabling the newer phylink behaviour. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + net/dsa/port.c | 7 +++++++ + 1 file changed, 7 insertions(+) + +--- a/net/dsa/port.c ++++ b/net/dsa/port.c +@@ -1110,6 +1110,13 @@ int dsa_port_phylink_create(struct dsa_p + if (err) + mode = PHY_INTERFACE_MODE_NA; + ++ /* Presence of phylink_mac_link_state or phylink_mac_an_restart is ++ * an indicator of a legacy phylink driver. ++ */ ++ if (ds->ops->phylink_mac_link_state || ++ ds->ops->phylink_mac_an_restart) ++ dp->pl_config.legacy_pre_march2020 = true; ++ + if (ds->ops->phylink_get_caps) + ds->ops->phylink_get_caps(ds, dp->index, &dp->pl_config); + diff --git a/target/linux/generic/backport-5.15/703-14-v5.17-net-phylink-use-legacy_pre_march2020.patch b/target/linux/generic/backport-5.15/703-14-v5.17-net-phylink-use-legacy_pre_march2020.patch new file mode 100644 index 0000000000..361fa10d4d --- /dev/null +++ b/target/linux/generic/backport-5.15/703-14-v5.17-net-phylink-use-legacy_pre_march2020.patch @@ -0,0 +1,115 @@ +From 001f4261fe4d5ae710cf1f445b6cae6d9d3ae26e Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Thu, 9 Dec 2021 13:11:48 +0000 +Subject: [PATCH] net: phylink: use legacy_pre_march2020 + +Use the legacy flag to indicate whether we should operate in legacy +mode. This allows us to stop using the presence of a PCS as an +indicator to the age of the phylink user, and make PCS presence +optional. + +Legacy mode involves: +1) calling mac_config() whenever the link comes up +2) calling mac_config() whenever the inband advertisement changes, + possibly followed by a call to mac_an_restart() +3) making use of mac_an_restart() +4) making use of mac_pcs_get_state() + +All the above functionality was moved to a seperate "PCS" block of +operations in March 2020. + +Update the documents to indicate that the differences that this flag +makes. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/phy/phylink.c | 12 ++++++------ + include/linux/phylink.h | 17 +++++++++++++++++ + 2 files changed, 23 insertions(+), 6 deletions(-) + +--- a/drivers/net/phy/phylink.c ++++ b/drivers/net/phy/phylink.c +@@ -777,7 +777,7 @@ static void phylink_mac_pcs_an_restart(s + phylink_autoneg_inband(pl->cur_link_an_mode)) { + if (pl->pcs_ops) + pl->pcs_ops->pcs_an_restart(pl->pcs); +- else ++ else if (pl->config->legacy_pre_march2020) + pl->mac_ops->mac_an_restart(pl->config); + } + } +@@ -855,7 +855,7 @@ static int phylink_change_inband_advert( + if (test_bit(PHYLINK_DISABLE_STOPPED, &pl->phylink_disable_state)) + return 0; + +- if (!pl->pcs_ops) { ++ if (!pl->pcs_ops && pl->config->legacy_pre_march2020) { + /* Legacy method */ + phylink_mac_config(pl, &pl->link_config); + phylink_mac_pcs_an_restart(pl); +@@ -900,7 +900,8 @@ static void phylink_mac_pcs_get_state(st + + if (pl->pcs_ops) + pl->pcs_ops->pcs_get_state(pl->pcs, state); +- else if (pl->mac_ops->mac_pcs_get_state) ++ else if (pl->mac_ops->mac_pcs_get_state && ++ pl->config->legacy_pre_march2020) + pl->mac_ops->mac_pcs_get_state(pl->config, state); + else + state->link = 0; +@@ -1094,12 +1095,11 @@ static void phylink_resolve(struct work_ + } + phylink_major_config(pl, false, &link_state); + pl->link_config.interface = link_state.interface; +- } else if (!pl->pcs_ops) { ++ } else if (!pl->pcs_ops && pl->config->legacy_pre_march2020) { + /* The interface remains unchanged, only the speed, + * duplex or pause settings have changed. Call the + * old mac_config() method to configure the MAC/PCS +- * only if we do not have a PCS installed (an +- * unconverted user.) ++ * only if we do not have a legacy MAC driver. + */ + phylink_mac_config(pl, &link_state); + } +--- a/include/linux/phylink.h ++++ b/include/linux/phylink.h +@@ -208,6 +208,10 @@ struct phylink_pcs *mac_select_pcs(struc + * negotiation completion state in @state->an_complete, and link up state + * in @state->link. If possible, @state->lp_advertising should also be + * populated. ++ * ++ * Note: This is a legacy method. This function will not be called unless ++ * legacy_pre_march2020 is set in &struct phylink_config and there is no ++ * PCS attached. + */ + void mac_pcs_get_state(struct phylink_config *config, + struct phylink_link_state *state); +@@ -248,6 +252,15 @@ int mac_prepare(struct phylink_config *c + * guaranteed to be correct, and so any mac_config() implementation must + * never reference these fields. + * ++ * Note: For legacy March 2020 drivers (drivers with legacy_pre_march2020 set ++ * in their &phylnk_config and which don't have a PCS), this function will be ++ * called on each link up event, and to also change the in-band advert. For ++ * non-legacy drivers, it will only be called to reconfigure the MAC for a ++ * "major" change in e.g. interface mode. It will not be called for changes ++ * in speed, duplex or pause modes or to change the in-band advertisement. ++ * In any case, it is strongly preferred that speed, duplex and pause settings ++ * are handled in the mac_link_up() method and not in this method. ++ * + * (this requires a rewrite - please refer to mac_link_up() for situations + * where the PCS and MAC are not tightly integrated.) + * +@@ -332,6 +345,10 @@ int mac_finish(struct phylink_config *co + /** + * mac_an_restart() - restart 802.3z BaseX autonegotiation + * @config: a pointer to a &struct phylink_config. ++ * ++ * Note: This is a legacy method. This function will not be called unless ++ * legacy_pre_march2020 is set in &struct phylink_config and there is no ++ * PCS attached. + */ + void mac_an_restart(struct phylink_config *config); + diff --git a/target/linux/generic/backport-5.15/704-01-v5.17-net-mtk_eth_soc-populate-supported_interfaces-member.patch b/target/linux/generic/backport-5.15/704-01-v5.17-net-mtk_eth_soc-populate-supported_interfaces-member.patch new file mode 100644 index 0000000000..43e1f9cc31 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-01-v5.17-net-mtk_eth_soc-populate-supported_interfaces-member.patch @@ -0,0 +1,43 @@ +From 83800d29f0c578e82554e7d4c6bfdbdf9b6cf428 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Tue, 16 Nov 2021 10:06:43 +0000 +Subject: [PATCH] net: mtk_eth_soc: populate supported_interfaces member + +Populate the phy interface mode bitmap for the Mediatek driver with +interfaces modes supported by the MAC. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 20 ++++++++++++++++++++ + 1 file changed, 20 insertions(+) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -3352,6 +3352,26 @@ static int mtk_add_mac(struct mtk_eth *e + + mac->phylink_config.dev = ð->netdev[id]->dev; + mac->phylink_config.type = PHYLINK_NETDEV; ++ __set_bit(PHY_INTERFACE_MODE_MII, ++ mac->phylink_config.supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_GMII, ++ mac->phylink_config.supported_interfaces); ++ ++ if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII)) ++ phy_interface_set_rgmii(mac->phylink_config.supported_interfaces); ++ ++ if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_TRGMII) && !mac->id) ++ __set_bit(PHY_INTERFACE_MODE_TRGMII, ++ mac->phylink_config.supported_interfaces); ++ ++ if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_SGMII)) { ++ __set_bit(PHY_INTERFACE_MODE_SGMII, ++ mac->phylink_config.supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_1000BASEX, ++ mac->phylink_config.supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_2500BASEX, ++ mac->phylink_config.supported_interfaces); ++ } + + phylink = phylink_create(&mac->phylink_config, + of_fwnode_handle(mac->of_node), diff --git a/target/linux/generic/backport-5.15/704-02-v5.17-net-mtk_eth_soc-remove-interface-checks-in-mtk_valid.patch b/target/linux/generic/backport-5.15/704-02-v5.17-net-mtk_eth_soc-remove-interface-checks-in-mtk_valid.patch new file mode 100644 index 0000000000..05a84c4f67 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-02-v5.17-net-mtk_eth_soc-remove-interface-checks-in-mtk_valid.patch @@ -0,0 +1,75 @@ +From db81ca153814475d7e07365d46a4d1134bd122e2 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Tue, 16 Nov 2021 10:06:48 +0000 +Subject: [PATCH] net: mtk_eth_soc: remove interface checks in mtk_validate() + +As phylink checks the interface mode against the supported_interfaces +bitmap, we no longer need to validate the interface mode, nor handle +PHY_INTERFACE_MODE_NA in the validation function. Remove these to +simplify the implementation. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 34 --------------------- + 1 file changed, 34 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -567,24 +567,8 @@ static void mtk_validate(struct phylink_ + unsigned long *supported, + struct phylink_link_state *state) + { +- struct mtk_mac *mac = container_of(config, struct mtk_mac, +- phylink_config); + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + +- if (state->interface != PHY_INTERFACE_MODE_NA && +- state->interface != PHY_INTERFACE_MODE_MII && +- state->interface != PHY_INTERFACE_MODE_GMII && +- !(MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII) && +- phy_interface_mode_is_rgmii(state->interface)) && +- !(MTK_HAS_CAPS(mac->hw->soc->caps, MTK_TRGMII) && +- !mac->id && state->interface == PHY_INTERFACE_MODE_TRGMII) && +- !(MTK_HAS_CAPS(mac->hw->soc->caps, MTK_SGMII) && +- (state->interface == PHY_INTERFACE_MODE_SGMII || +- phy_interface_mode_is_8023z(state->interface)))) { +- linkmode_zero(supported); +- return; +- } +- + phylink_set_port_modes(mask); + phylink_set(mask, Autoneg); + +@@ -611,7 +595,6 @@ static void mtk_validate(struct phylink_ + case PHY_INTERFACE_MODE_MII: + case PHY_INTERFACE_MODE_RMII: + case PHY_INTERFACE_MODE_REVMII: +- case PHY_INTERFACE_MODE_NA: + default: + phylink_set(mask, 10baseT_Half); + phylink_set(mask, 10baseT_Full); +@@ -620,23 +603,6 @@ static void mtk_validate(struct phylink_ + break; + } + +- if (state->interface == PHY_INTERFACE_MODE_NA) { +- if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_SGMII)) { +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseX_Full); +- phylink_set(mask, 2500baseX_Full); +- } +- if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII)) { +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseT_Half); +- phylink_set(mask, 1000baseX_Full); +- } +- if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_GEPHY)) { +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseT_Half); +- } +- } +- + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); + diff --git a/target/linux/generic/backport-5.15/704-03-v5.17-net-mtk_eth_soc-drop-use-of-phylink_helper_basex_spe.patch b/target/linux/generic/backport-5.15/704-03-v5.17-net-mtk_eth_soc-drop-use-of-phylink_helper_basex_spe.patch new file mode 100644 index 0000000000..a3cfab7f88 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-03-v5.17-net-mtk_eth_soc-drop-use-of-phylink_helper_basex_spe.patch @@ -0,0 +1,42 @@ +From 71d927494463c4f016d828e1134da26b7e961af5 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Tue, 16 Nov 2021 10:06:53 +0000 +Subject: [PATCH] net: mtk_eth_soc: drop use of phylink_helper_basex_speed() + +Now that we have a better method to select SFP interface modes, we +no longer need to use phylink_helper_basex_speed() in a driver's +validation function, and we can also get rid of our hack to indicate +both 1000base-X and 2500base-X if the comphy is present to make that +work. Remove this hack and use of phylink_helper_basex_speed(). + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 ++------ + 1 file changed, 2 insertions(+), 6 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -577,8 +577,9 @@ static void mtk_validate(struct phylink_ + phylink_set(mask, 1000baseT_Full); + break; + case PHY_INTERFACE_MODE_1000BASEX: +- case PHY_INTERFACE_MODE_2500BASEX: + phylink_set(mask, 1000baseX_Full); ++ break; ++ case PHY_INTERFACE_MODE_2500BASEX: + phylink_set(mask, 2500baseX_Full); + break; + case PHY_INTERFACE_MODE_GMII: +@@ -608,11 +609,6 @@ static void mtk_validate(struct phylink_ + + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); +- +- /* We can only operate at 2500BaseX or 1000BaseX. If requested +- * to advertise both, only report advertising at 2500BaseX. +- */ +- phylink_helper_basex_speed(state); + } + + static const struct phylink_mac_ops mtk_phylink_ops = { diff --git a/target/linux/generic/backport-5.15/704-04-v5.17-net-mtk_eth_soc-use-phylink_generic_validate.patch b/target/linux/generic/backport-5.15/704-04-v5.17-net-mtk_eth_soc-use-phylink_generic_validate.patch new file mode 100644 index 0000000000..7f3734a765 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-04-v5.17-net-mtk_eth_soc-use-phylink_generic_validate.patch @@ -0,0 +1,84 @@ +From a4238f6ce151afa331375d74a5033b76da637644 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Tue, 16 Nov 2021 10:06:58 +0000 +Subject: [PATCH] net: mtk_eth_soc: use phylink_generic_validate() + +mtk_eth_soc has no special behaviour in its validation implementation, +so can be switched to phylink_generic_validate(). + +Signed-off-by: Russell King (Oracle) +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 53 ++------------------- + 1 file changed, 4 insertions(+), 49 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -563,56 +563,8 @@ static void mtk_mac_link_up(struct phyli + mtk_w32(mac->hw, mcr, MTK_MAC_MCR(mac->id)); + } + +-static void mtk_validate(struct phylink_config *config, +- unsigned long *supported, +- struct phylink_link_state *state) +-{ +- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; +- +- phylink_set_port_modes(mask); +- phylink_set(mask, Autoneg); +- +- switch (state->interface) { +- case PHY_INTERFACE_MODE_TRGMII: +- phylink_set(mask, 1000baseT_Full); +- break; +- case PHY_INTERFACE_MODE_1000BASEX: +- phylink_set(mask, 1000baseX_Full); +- break; +- case PHY_INTERFACE_MODE_2500BASEX: +- phylink_set(mask, 2500baseX_Full); +- break; +- case PHY_INTERFACE_MODE_GMII: +- case PHY_INTERFACE_MODE_RGMII: +- case PHY_INTERFACE_MODE_RGMII_ID: +- case PHY_INTERFACE_MODE_RGMII_RXID: +- case PHY_INTERFACE_MODE_RGMII_TXID: +- phylink_set(mask, 1000baseT_Half); +- fallthrough; +- case PHY_INTERFACE_MODE_SGMII: +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseX_Full); +- fallthrough; +- case PHY_INTERFACE_MODE_MII: +- case PHY_INTERFACE_MODE_RMII: +- case PHY_INTERFACE_MODE_REVMII: +- default: +- phylink_set(mask, 10baseT_Half); +- phylink_set(mask, 10baseT_Full); +- phylink_set(mask, 100baseT_Half); +- phylink_set(mask, 100baseT_Full); +- break; +- } +- +- phylink_set(mask, Pause); +- phylink_set(mask, Asym_Pause); +- +- linkmode_and(supported, supported, mask); +- linkmode_and(state->advertising, state->advertising, mask); +-} +- + static const struct phylink_mac_ops mtk_phylink_ops = { +- .validate = mtk_validate, ++ .validate = phylink_generic_validate, + .mac_pcs_get_state = mtk_mac_pcs_get_state, + .mac_an_restart = mtk_mac_an_restart, + .mac_config = mtk_mac_config, +@@ -3314,6 +3266,9 @@ static int mtk_add_mac(struct mtk_eth *e + + mac->phylink_config.dev = ð->netdev[id]->dev; + mac->phylink_config.type = PHYLINK_NETDEV; ++ mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | ++ MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD; ++ + __set_bit(PHY_INTERFACE_MODE_MII, + mac->phylink_config.supported_interfaces); + __set_bit(PHY_INTERFACE_MODE_GMII, diff --git a/target/linux/generic/backport-5.15/704-05-v5.17-net-mtk_eth_soc-mark-as-a-legacy_pre_march2020-drive.patch b/target/linux/generic/backport-5.15/704-05-v5.17-net-mtk_eth_soc-mark-as-a-legacy_pre_march2020-drive.patch new file mode 100644 index 0000000000..6aa99acf77 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-05-v5.17-net-mtk_eth_soc-mark-as-a-legacy_pre_march2020-drive.patch @@ -0,0 +1,29 @@ +From b06515367facfadcf5e70cf6f39db749cf4eb5e3 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Thu, 9 Dec 2021 13:11:43 +0000 +Subject: [PATCH] net: mtk_eth_soc: mark as a legacy_pre_march2020 driver + +mtk_eth_soc has not been updated for commit 7cceb599d15d ("net: phylink: +avoid mac_config calls"), and makes use of state->speed and +state->duplex in contravention of the phylink documentation. This makes +reliant on the legacy behaviours, so mark it as a legacy driver. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++++ + 1 file changed, 4 insertions(+) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -3266,6 +3266,10 @@ static int mtk_add_mac(struct mtk_eth *e + + mac->phylink_config.dev = ð->netdev[id]->dev; + mac->phylink_config.type = PHYLINK_NETDEV; ++ /* This driver makes use of state->speed/state->duplex in ++ * mac_config ++ */ ++ mac->phylink_config.legacy_pre_march2020 = true; + mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD; + diff --git a/target/linux/generic/backport-5.15/704-06-v5.19-eth-mtk_eth_soc-remove-a-copy-of-the-NAPI_POLL_WEIGH.patch b/target/linux/generic/backport-5.15/704-06-v5.19-eth-mtk_eth_soc-remove-a-copy-of-the-NAPI_POLL_WEIGH.patch new file mode 100644 index 0000000000..e5f70e36f0 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-06-v5.19-eth-mtk_eth_soc-remove-a-copy-of-the-NAPI_POLL_WEIGH.patch @@ -0,0 +1,40 @@ +From 889e3691b9d6573de133da1f5e78f590e52152cd Mon Sep 17 00:00:00 2001 +From: Jakub Kicinski +Date: Thu, 28 Apr 2022 14:23:13 -0700 +Subject: [PATCH] eth: mtk_eth_soc: remove a copy of the NAPI_POLL_WEIGHT + define + +Defining local versions of NAPI_POLL_WEIGHT with the same +values in the drivers just makes refactoring harder. + +Signed-off-by: Jakub Kicinski +Signed-off-by: David S. Miller +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 4 ++-- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 - + 2 files changed, 2 insertions(+), 3 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -3565,9 +3565,9 @@ static int mtk_probe(struct platform_dev + */ + init_dummy_netdev(ð->dummy_dev); + netif_napi_add(ð->dummy_dev, ð->tx_napi, mtk_napi_tx, +- MTK_NAPI_WEIGHT); ++ NAPI_POLL_WEIGHT); + netif_napi_add(ð->dummy_dev, ð->rx_napi, mtk_napi_rx, +- MTK_NAPI_WEIGHT); ++ NAPI_POLL_WEIGHT); + + platform_set_drvdata(pdev, eth); + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -25,7 +25,6 @@ + #define MTK_TX_DMA_BUF_LEN 0x3fff + #define MTK_TX_DMA_BUF_LEN_V2 0xffff + #define MTK_DMA_SIZE 512 +-#define MTK_NAPI_WEIGHT 64 + #define MTK_MAC_COUNT 2 + #define MTK_RX_ETH_HLEN (ETH_HLEN + ETH_FCS_LEN) + #define MTK_RX_HLEN (NET_SKB_PAD + MTK_RX_ETH_HLEN + NET_IP_ALIGN) diff --git a/target/linux/generic/backport-5.15/704-07-v5.19-mtk_eth_soc-remove-unused-mac-mode.patch b/target/linux/generic/backport-5.15/704-07-v5.19-mtk_eth_soc-remove-unused-mac-mode.patch new file mode 100644 index 0000000000..4d896cdf39 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-07-v5.19-mtk_eth_soc-remove-unused-mac-mode.patch @@ -0,0 +1,35 @@ +From 0600bdde1fae75fb9bad72033d28edddc72b44b2 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:54:31 +0100 +Subject: [PATCH 01/12] net: mtk_eth_soc: remove unused mac->mode + +mac->mode is only ever written to in one location, and is thus +superflous. Remove it. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 - + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 - + 2 files changed, 2 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -3261,7 +3261,6 @@ static int mtk_add_mac(struct mtk_eth *e + + /* mac config is not set */ + mac->interface = PHY_INTERFACE_MODE_NA; +- mac->mode = MLO_AN_PHY; + mac->speed = SPEED_UNKNOWN; + + mac->phylink_config.dev = ð->netdev[id]->dev; +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -1085,7 +1085,6 @@ struct mtk_eth { + struct mtk_mac { + int id; + phy_interface_t interface; +- unsigned int mode; + int speed; + struct device_node *of_node; + struct phylink *phylink; diff --git a/target/linux/generic/backport-5.15/704-08-v5.19-net-mtk_eth_soc-remove-unused-sgmii-flags.patch b/target/linux/generic/backport-5.15/704-08-v5.19-net-mtk_eth_soc-remove-unused-sgmii-flags.patch new file mode 100644 index 0000000000..39aa24157e --- /dev/null +++ b/target/linux/generic/backport-5.15/704-08-v5.19-net-mtk_eth_soc-remove-unused-sgmii-flags.patch @@ -0,0 +1,40 @@ +From 5a7a2f4b29d7546244da7d8bbc1962fce5b230f2 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:54:36 +0100 +Subject: [PATCH 02/12] net: mtk_eth_soc: remove unused sgmii flags + +The "flags" member of struct mtk_sgmii appears to be unused, as are +the MTK_SGMII_PHYSPEED_* and MTK_HAS_FLAGS() macros. Remove them. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 -------- + 1 file changed, 8 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -956,23 +956,15 @@ struct mtk_soc_data { + /* currently no SoC has more than 2 macs */ + #define MTK_MAX_DEVS 2 + +-#define MTK_SGMII_PHYSPEED_AN BIT(31) +-#define MTK_SGMII_PHYSPEED_MASK GENMASK(2, 0) +-#define MTK_SGMII_PHYSPEED_1000 BIT(0) +-#define MTK_SGMII_PHYSPEED_2500 BIT(1) +-#define MTK_HAS_FLAGS(flags, _x) (((flags) & (_x)) == (_x)) +- + /* struct mtk_sgmii - This is the structure holding sgmii regmap and its + * characteristics + * @regmap: The register map pointing at the range used to setup + * SGMII modes +- * @flags: The enum refers to which mode the sgmii wants to run on + * @ana_rgc3: The offset refers to register ANA_RGC3 related to regmap + */ + + struct mtk_sgmii { + struct regmap *regmap[MTK_MAX_DEVS]; +- u32 flags[MTK_MAX_DEVS]; + u32 ana_rgc3; + }; + diff --git a/target/linux/generic/backport-5.15/704-09-v5.19-net-mtk_eth_soc-add-mask-and-update-PCS-speed-defini.patch b/target/linux/generic/backport-5.15/704-09-v5.19-net-mtk_eth_soc-add-mask-and-update-PCS-speed-defini.patch new file mode 100644 index 0000000000..f2e1f86bac --- /dev/null +++ b/target/linux/generic/backport-5.15/704-09-v5.19-net-mtk_eth_soc-add-mask-and-update-PCS-speed-defini.patch @@ -0,0 +1,40 @@ +From bc5e93e0cd22e360eda23859b939280205567580 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:54:42 +0100 +Subject: [PATCH 03/12] net: mtk_eth_soc: add mask and update PCS speed + definitions + +The PCS speed setting is a two bit field, but it is defined as two +separate bits. Add a bitfield mask for the speed definitions, an + use the FIELD_PREP() macro to define each PCS speed. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 8 +++++--- + 1 file changed, 5 insertions(+), 3 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -17,6 +17,7 @@ + #include + #include + #include ++#include + #include "mtk_ppe.h" + + #define MTK_QDMA_PAGE_SIZE 2048 +@@ -473,9 +474,10 @@ + #define SGMSYS_SGMII_MODE 0x20 + #define SGMII_IF_MODE_BIT0 BIT(0) + #define SGMII_SPEED_DUPLEX_AN BIT(1) +-#define SGMII_SPEED_10 0x0 +-#define SGMII_SPEED_100 BIT(2) +-#define SGMII_SPEED_1000 BIT(3) ++#define SGMII_SPEED_MASK GENMASK(3, 2) ++#define SGMII_SPEED_10 FIELD_PREP(SGMII_SPEED_MASK, 0) ++#define SGMII_SPEED_100 FIELD_PREP(SGMII_SPEED_MASK, 1) ++#define SGMII_SPEED_1000 FIELD_PREP(SGMII_SPEED_MASK, 2) + #define SGMII_DUPLEX_FULL BIT(4) + #define SGMII_IF_MODE_BIT5 BIT(5) + #define SGMII_REMOTE_FAULT_DIS BIT(8) diff --git a/target/linux/generic/backport-5.15/704-10-v5.19-net-mtk_eth_soc-correct-802.3z-speed-setting.patch b/target/linux/generic/backport-5.15/704-10-v5.19-net-mtk_eth_soc-correct-802.3z-speed-setting.patch new file mode 100644 index 0000000000..fb1ee4e310 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-10-v5.19-net-mtk_eth_soc-correct-802.3z-speed-setting.patch @@ -0,0 +1,60 @@ +From 7da3f901f8ecb425105fad39a0f5de73306abe52 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:54:47 +0100 +Subject: [PATCH 04/12] net: mtk_eth_soc: correct 802.3z speed setting + +Phylink does not guarantee that state->speed will be set correctly in +the mac_config() call, so it's a bug that the driver makes use of it. +Moreover, it is making use of it in a function that is only ever called +for 1000BASE-X and 2500BASE-X which operate at a fixed speed which +happens to be the same setting irrespective of the interface mode. We +can simply remove the switch statement and just set the SGMII interface +speed. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_sgmii.c | 18 +++++------------- + 1 file changed, 5 insertions(+), 13 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c ++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c +@@ -34,6 +34,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, + return 0; + } + ++/* For SGMII interface mode */ + int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id) + { + unsigned int val; +@@ -60,6 +61,9 @@ int mtk_sgmii_setup_mode_an(struct mtk_s + return 0; + } + ++/* For 1000BASE-X and 2500BASE-X interface modes, which operate at a ++ * fixed speed. ++ */ + int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id, + const struct phylink_link_state *state) + { +@@ -82,19 +86,7 @@ int mtk_sgmii_setup_mode_force(struct mt + /* SGMII force mode setting */ + regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val); + val &= ~SGMII_IF_MODE_MASK; +- +- switch (state->speed) { +- case SPEED_10: +- val |= SGMII_SPEED_10; +- break; +- case SPEED_100: +- val |= SGMII_SPEED_100; +- break; +- case SPEED_2500: +- case SPEED_1000: +- val |= SGMII_SPEED_1000; +- break; +- } ++ val |= SGMII_SPEED_1000; + + if (state->duplex == DUPLEX_FULL) + val |= SGMII_DUPLEX_FULL; diff --git a/target/linux/generic/backport-5.15/704-11-v5.19-net-mtk_eth_soc-correct-802.3z-duplex-setting.patch b/target/linux/generic/backport-5.15/704-11-v5.19-net-mtk_eth_soc-correct-802.3z-duplex-setting.patch new file mode 100644 index 0000000000..140ff3cab5 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-11-v5.19-net-mtk_eth_soc-correct-802.3z-duplex-setting.patch @@ -0,0 +1,101 @@ +From a459187390bb221827f9c07866c3a5ffbdf9622b Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Wed, 18 May 2022 15:54:52 +0100 +Subject: [PATCH 05/12] net: mtk_eth_soc: correct 802.3z duplex setting + +Phylink does not guarantee that state->duplex will be set correctly in +the mac_config() call, so it's a bug that the driver makes use of it. + +Move the 802.3z PCS duplex configuration to mac_link_up(). + +Signed-off-by: Russell King +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 16 +++++++++++---- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 + + drivers/net/ethernet/mediatek/mtk_sgmii.c | 22 +++++++++++++++------ + 3 files changed, 29 insertions(+), 10 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -532,8 +532,18 @@ static void mtk_mac_link_up(struct phyli + { + struct mtk_mac *mac = container_of(config, struct mtk_mac, + phylink_config); +- u32 mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); ++ u32 mcr; + ++ if (phy_interface_mode_is_8023z(interface)) { ++ struct mtk_eth *eth = mac->hw; ++ ++ /* Decide how GMAC and SGMIISYS be mapped */ ++ int sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ? ++ 0 : mac->id; ++ mtk_sgmii_link_up(eth->sgmii, sid, speed, duplex); ++ } ++ ++ mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); + mcr &= ~(MAC_MCR_SPEED_100 | MAC_MCR_SPEED_1000 | + MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_TX_FC | + MAC_MCR_FORCE_RX_FC); +@@ -3265,9 +3275,7 @@ static int mtk_add_mac(struct mtk_eth *e + + mac->phylink_config.dev = ð->netdev[id]->dev; + mac->phylink_config.type = PHYLINK_NETDEV; +- /* This driver makes use of state->speed/state->duplex in +- * mac_config +- */ ++ /* This driver makes use of state->speed in mac_config */ + mac->phylink_config.legacy_pre_march2020 = true; + mac->phylink_config.mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000 | MAC_2500FD; +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -1103,6 +1103,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, + int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id); + int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id, + const struct phylink_link_state *state); ++void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex); + void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id); + + int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id); +--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c ++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c +@@ -83,14 +83,10 @@ int mtk_sgmii_setup_mode_force(struct mt + val &= ~SGMII_AN_ENABLE; + regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val); + +- /* SGMII force mode setting */ ++ /* Set the speed etc but leave the duplex unchanged */ + regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val); +- val &= ~SGMII_IF_MODE_MASK; ++ val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK; + val |= SGMII_SPEED_1000; +- +- if (state->duplex == DUPLEX_FULL) +- val |= SGMII_DUPLEX_FULL; +- + regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val); + + /* Release PHYA power down state */ +@@ -101,6 +97,20 @@ int mtk_sgmii_setup_mode_force(struct mt + return 0; + } + ++/* For 1000BASE-X and 2500BASE-X interface modes */ ++void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex) ++{ ++ unsigned int val; ++ ++ /* SGMII force duplex setting */ ++ regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val); ++ val &= ~SGMII_DUPLEX_FULL; ++ if (duplex == DUPLEX_FULL) ++ val |= SGMII_DUPLEX_FULL; ++ ++ regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val); ++} ++ + void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id) + { + struct mtk_sgmii *ss = eth->sgmii; diff --git a/target/linux/generic/backport-5.15/704-12-v5.19-net-mtk_eth_soc-stop-passing-phylink-state-to-sgmii-.patch b/target/linux/generic/backport-5.15/704-12-v5.19-net-mtk_eth_soc-stop-passing-phylink-state-to-sgmii-.patch new file mode 100644 index 0000000000..56b5e43e53 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-12-v5.19-net-mtk_eth_soc-stop-passing-phylink-state-to-sgmii-.patch @@ -0,0 +1,60 @@ +From 4ce5a0bd3958ed248f0325bfcb95339f7c74feb2 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:54:57 +0100 +Subject: [PATCH 06/12] net: mtk_eth_soc: stop passing phylink state to sgmii + setup + +Now that mtk_sgmii_setup_mode_force() only uses the interface mode +from the phylink state, pass just the interface mode into this +function. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 2 +- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 2 +- + drivers/net/ethernet/mediatek/mtk_sgmii.c | 4 ++-- + 3 files changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -437,7 +437,7 @@ static void mtk_mac_config(struct phylin + /* Setup SGMIISYS with the determined property */ + if (state->interface != PHY_INTERFACE_MODE_SGMII) + err = mtk_sgmii_setup_mode_force(eth->sgmii, sid, +- state); ++ state->interface); + else if (phylink_autoneg_inband(mode)) + err = mtk_sgmii_setup_mode_an(eth->sgmii, sid); + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -1102,7 +1102,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, + u32 ana_rgc3); + int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id); + int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id, +- const struct phylink_link_state *state); ++ phy_interface_t interface); + void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex); + void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id); + +--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c ++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c +@@ -65,7 +65,7 @@ int mtk_sgmii_setup_mode_an(struct mtk_s + * fixed speed. + */ + int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id, +- const struct phylink_link_state *state) ++ phy_interface_t interface) + { + unsigned int val; + +@@ -74,7 +74,7 @@ int mtk_sgmii_setup_mode_force(struct mt + + regmap_read(ss->regmap[id], ss->ana_rgc3, &val); + val &= ~RG_PHY_SPEED_MASK; +- if (state->interface == PHY_INTERFACE_MODE_2500BASEX) ++ if (interface == PHY_INTERFACE_MODE_2500BASEX) + val |= RG_PHY_SPEED_3_125G; + regmap_write(ss->regmap[id], ss->ana_rgc3, val); + diff --git a/target/linux/generic/backport-5.15/704-13-v5.19-net-mtk_eth_soc-provide-mtk_sgmii_config.patch b/target/linux/generic/backport-5.15/704-13-v5.19-net-mtk_eth_soc-provide-mtk_sgmii_config.patch new file mode 100644 index 0000000000..4c91cf68f4 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-13-v5.19-net-mtk_eth_soc-provide-mtk_sgmii_config.patch @@ -0,0 +1,89 @@ +From 1ec619ee4a052fb9ac48b57554ac2722a0bfe73c Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:55:02 +0100 +Subject: [PATCH 07/12] net: mtk_eth_soc: provide mtk_sgmii_config() + +Provide mtk_sgmii_config() to wrap up the decisions about which SGMII +configuration will be called. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 7 +------ + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 5 ++--- + drivers/net/ethernet/mediatek/mtk_sgmii.c | 20 +++++++++++++++++--- + 3 files changed, 20 insertions(+), 12 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -435,12 +435,7 @@ static void mtk_mac_config(struct phylin + 0 : mac->id; + + /* Setup SGMIISYS with the determined property */ +- if (state->interface != PHY_INTERFACE_MODE_SGMII) +- err = mtk_sgmii_setup_mode_force(eth->sgmii, sid, +- state->interface); +- else if (phylink_autoneg_inband(mode)) +- err = mtk_sgmii_setup_mode_an(eth->sgmii, sid); +- ++ err = mtk_sgmii_config(eth->sgmii, sid, mode, state->interface); + if (err) + goto init_err; + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -1100,9 +1100,8 @@ u32 mtk_r32(struct mtk_eth *eth, unsigne + + int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *np, + u32 ana_rgc3); +-int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id); +-int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id, +- phy_interface_t interface); ++int mtk_sgmii_config(struct mtk_sgmii *ss, int id, unsigned int mode, ++ phy_interface_t interface); + void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex); + void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id); + +--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c ++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c +@@ -35,7 +35,7 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, + } + + /* For SGMII interface mode */ +-int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id) ++static int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id) + { + unsigned int val; + +@@ -64,8 +64,8 @@ int mtk_sgmii_setup_mode_an(struct mtk_s + /* For 1000BASE-X and 2500BASE-X interface modes, which operate at a + * fixed speed. + */ +-int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id, +- phy_interface_t interface) ++static int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id, ++ phy_interface_t interface) + { + unsigned int val; + +@@ -97,6 +97,20 @@ int mtk_sgmii_setup_mode_force(struct mt + return 0; + } + ++int mtk_sgmii_config(struct mtk_sgmii *ss, int id, unsigned int mode, ++ phy_interface_t interface) ++{ ++ int err = 0; ++ ++ /* Setup SGMIISYS with the determined property */ ++ if (interface != PHY_INTERFACE_MODE_SGMII) ++ err = mtk_sgmii_setup_mode_force(ss, id, interface); ++ else if (phylink_autoneg_inband(mode)) ++ err = mtk_sgmii_setup_mode_an(ss, id); ++ ++ return err; ++} ++ + /* For 1000BASE-X and 2500BASE-X interface modes */ + void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex) + { diff --git a/target/linux/generic/backport-5.15/704-14-v5.19-net-mtk_eth_soc-add-fixme-comment-for-state-speed-us.patch b/target/linux/generic/backport-5.15/704-14-v5.19-net-mtk_eth_soc-add-fixme-comment-for-state-speed-us.patch new file mode 100644 index 0000000000..8080a2ca44 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-14-v5.19-net-mtk_eth_soc-add-fixme-comment-for-state-speed-us.patch @@ -0,0 +1,38 @@ +From 650a49bc65df6b0e0051a8f62d7c22d95a8f350d Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:55:07 +0100 +Subject: [PATCH 08/12] net: mtk_eth_soc: add fixme comment for state->speed + use + +Add a fixme comment for the last remaining incorrect usage of +state->speed in the mac_config() method, which is strangely in a code +path which is only run when the PHY interface mode changes. + +This means if we are in RGMII mode, changes in state->speed will not +cause the INTF_MODE, TRGMII_RCK_CTRL and TRGMII_TCK_CTRL registers to +be set according to the speed, nor will the TRGPLL clock be set to the +correct value. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 8 ++++++++ + 1 file changed, 8 insertions(+) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -374,6 +374,14 @@ static void mtk_mac_config(struct phylin + state->interface)) + goto err_phy; + } else { ++ /* FIXME: this is incorrect. Not only does it ++ * use state->speed (which is not guaranteed ++ * to be correct) but it also makes use of it ++ * in a code path that will only be reachable ++ * when the PHY interface mode changes, not ++ * when the speed changes. Consequently, RGMII ++ * is probably broken. ++ */ + mtk_gmac0_rgmii_adjust(mac->hw, + state->interface, + state->speed); diff --git a/target/linux/generic/backport-5.15/704-15-v5.19-net-mtk_eth_soc-move-MAC_MCR-setting-to-mac_finish.patch b/target/linux/generic/backport-5.15/704-15-v5.19-net-mtk_eth_soc-move-MAC_MCR-setting-to-mac_finish.patch new file mode 100644 index 0000000000..368db4cca2 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-15-v5.19-net-mtk_eth_soc-move-MAC_MCR-setting-to-mac_finish.patch @@ -0,0 +1,79 @@ +From 0e37ad71b2ff772009595002da2860999e98e14e Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:55:12 +0100 +Subject: [PATCH 09/12] net: mtk_eth_soc: move MAC_MCR setting to mac_finish() + +Move the setting of the MTK_MAC_MCR register from the end of mac_config +into the phylink mac_finish() method, to keep it as the very last write +that is done during configuration. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 33 ++++++++++++++------- + 1 file changed, 22 insertions(+), 11 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -316,8 +316,8 @@ static void mtk_mac_config(struct phylin + struct mtk_mac *mac = container_of(config, struct mtk_mac, + phylink_config); + struct mtk_eth *eth = mac->hw; +- u32 mcr_cur, mcr_new, sid, i; + int val, ge_mode, err = 0; ++ u32 sid, i; + + /* MT76x8 has no hardware settings between for the MAC */ + if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) && +@@ -455,16 +455,6 @@ static void mtk_mac_config(struct phylin + return; + } + +- /* Setup gmac */ +- mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); +- mcr_new = mcr_cur; +- mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE | +- MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK; +- +- /* Only update control register when needed! */ +- if (mcr_new != mcr_cur) +- mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id)); +- + return; + + err_phy: +@@ -477,6 +467,26 @@ init_err: + mac->id, phy_modes(state->interface), err); + } + ++static int mtk_mac_finish(struct phylink_config *config, unsigned int mode, ++ phy_interface_t interface) ++{ ++ struct mtk_mac *mac = container_of(config, struct mtk_mac, ++ phylink_config); ++ u32 mcr_cur, mcr_new; ++ ++ /* Setup gmac */ ++ mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); ++ mcr_new = mcr_cur; ++ mcr_new |= MAC_MCR_IPG_CFG | MAC_MCR_FORCE_MODE | ++ MAC_MCR_BACKOFF_EN | MAC_MCR_BACKPR_EN | MAC_MCR_FORCE_LINK; ++ ++ /* Only update control register when needed! */ ++ if (mcr_new != mcr_cur) ++ mtk_w32(mac->hw, mcr_new, MTK_MAC_MCR(mac->id)); ++ ++ return 0; ++} ++ + static void mtk_mac_pcs_get_state(struct phylink_config *config, + struct phylink_link_state *state) + { +@@ -581,6 +591,7 @@ static const struct phylink_mac_ops mtk_ + .mac_pcs_get_state = mtk_mac_pcs_get_state, + .mac_an_restart = mtk_mac_an_restart, + .mac_config = mtk_mac_config, ++ .mac_finish = mtk_mac_finish, + .mac_link_down = mtk_mac_link_down, + .mac_link_up = mtk_mac_link_up, + }; diff --git a/target/linux/generic/backport-5.15/704-16-v5.19-net-mtk_eth_soc-move-restoration-of-SYSCFG0-to-mac_f.patch b/target/linux/generic/backport-5.15/704-16-v5.19-net-mtk_eth_soc-move-restoration-of-SYSCFG0-to-mac_f.patch new file mode 100644 index 0000000000..ad6ec60288 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-16-v5.19-net-mtk_eth_soc-move-restoration-of-SYSCFG0-to-mac_f.patch @@ -0,0 +1,57 @@ +From 21089867278deb2a110b685e3cd33f64f9ce41e2 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:55:17 +0100 +Subject: [PATCH 10/12] net: mtk_eth_soc: move restoration of SYSCFG0 to + mac_finish() + +The SGMIISYS configuration is performed while ETHSYS_SYSCFG0 is in a +disabled state. In order to preserve this when we switch to phylink_pcs +we need to move the restoration of this register to the mac_finish() +callback. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 11 +++++++++-- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 1 + + 2 files changed, 10 insertions(+), 2 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -447,8 +447,8 @@ static void mtk_mac_config(struct phylin + if (err) + goto init_err; + +- regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0, +- SYSCFG0_SGMII_MASK, val); ++ /* Save the syscfg0 value for mac_finish */ ++ mac->syscfg0 = val; + } else if (phylink_autoneg_inband(mode)) { + dev_err(eth->dev, + "In-band mode not supported in non SGMII mode!\n"); +@@ -472,8 +472,15 @@ static int mtk_mac_finish(struct phylink + { + struct mtk_mac *mac = container_of(config, struct mtk_mac, + phylink_config); ++ struct mtk_eth *eth = mac->hw; + u32 mcr_cur, mcr_new; + ++ /* Enable SGMII */ ++ if (interface == PHY_INTERFACE_MODE_SGMII || ++ phy_interface_mode_is_8023z(interface)) ++ regmap_update_bits(eth->ethsys, ETHSYS_SYSCFG0, ++ SYSCFG0_SGMII_MASK, mac->syscfg0); ++ + /* Setup gmac */ + mcr_cur = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); + mcr_new = mcr_cur; +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -1087,6 +1087,7 @@ struct mtk_mac { + struct mtk_hw_stats *hw_stats; + __be32 hwlro_ip[MTK_MAX_LRO_IP_CNT]; + int hwlro_ip_cnt; ++ unsigned int syscfg0; + }; + + /* the struct describing the SoC. these are declared in the soc_xyz.c files */ diff --git a/target/linux/generic/backport-5.15/704-17-v5.19-net-mtk_eth_soc-convert-code-structure-to-suit-split.patch b/target/linux/generic/backport-5.15/704-17-v5.19-net-mtk_eth_soc-convert-code-structure-to-suit-split.patch new file mode 100644 index 0000000000..623658f459 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-17-v5.19-net-mtk_eth_soc-convert-code-structure-to-suit-split.patch @@ -0,0 +1,254 @@ +From 901f3fbe13c3e56f0742e02717ccbfabbc95c463 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:55:22 +0100 +Subject: [PATCH 11/12] net: mtk_eth_soc: convert code structure to suit split + PCS support + +Provide a mtk_pcs structure which encapsulates everything that the PCS +functions need (the regmap and ana_rgc3 offset), and use this in the +PCS functions. Provide shim functions to convert from the existing +"mtk_sgmii_*" interface to the converted PCS functions. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 15 ++- + drivers/net/ethernet/mediatek/mtk_sgmii.c | 123 +++++++++++--------- + 2 files changed, 79 insertions(+), 59 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -958,16 +958,23 @@ struct mtk_soc_data { + /* currently no SoC has more than 2 macs */ + #define MTK_MAX_DEVS 2 + +-/* struct mtk_sgmii - This is the structure holding sgmii regmap and its +- * characteristics ++/* struct mtk_pcs - This structure holds each sgmii regmap and associated ++ * data + * @regmap: The register map pointing at the range used to setup + * SGMII modes + * @ana_rgc3: The offset refers to register ANA_RGC3 related to regmap + */ ++struct mtk_pcs { ++ struct regmap *regmap; ++ u32 ana_rgc3; ++}; + ++/* struct mtk_sgmii - This is the structure holding sgmii regmap and its ++ * characteristics ++ * @pcs Array of individual PCS structures ++ */ + struct mtk_sgmii { +- struct regmap *regmap[MTK_MAX_DEVS]; +- u32 ana_rgc3; ++ struct mtk_pcs pcs[MTK_MAX_DEVS]; + }; + + /* struct mtk_eth - This is the main datasructure for holding the state +--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c ++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c +@@ -9,90 +9,71 @@ + + #include + #include ++#include + #include + + #include "mtk_eth_soc.h" + +-int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3) +-{ +- struct device_node *np; +- int i; +- +- ss->ana_rgc3 = ana_rgc3; +- +- for (i = 0; i < MTK_MAX_DEVS; i++) { +- np = of_parse_phandle(r, "mediatek,sgmiisys", i); +- if (!np) +- break; +- +- ss->regmap[i] = syscon_node_to_regmap(np); +- of_node_put(np); +- if (IS_ERR(ss->regmap[i])) +- return PTR_ERR(ss->regmap[i]); +- } +- +- return 0; +-} +- + /* For SGMII interface mode */ +-static int mtk_sgmii_setup_mode_an(struct mtk_sgmii *ss, int id) ++static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs) + { + unsigned int val; + +- if (!ss->regmap[id]) ++ if (!mpcs->regmap) + return -EINVAL; + + /* Setup the link timer and QPHY power up inside SGMIISYS */ +- regmap_write(ss->regmap[id], SGMSYS_PCS_LINK_TIMER, ++ regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, + SGMII_LINK_TIMER_DEFAULT); + +- regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val); ++ regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val); + val |= SGMII_REMOTE_FAULT_DIS; +- regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val); ++ regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val); + +- regmap_read(ss->regmap[id], SGMSYS_PCS_CONTROL_1, &val); ++ regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val); + val |= SGMII_AN_RESTART; +- regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val); ++ regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val); + +- regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val); ++ regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val); + val &= ~SGMII_PHYA_PWD; +- regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val); ++ regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val); + + return 0; ++ + } + + /* For 1000BASE-X and 2500BASE-X interface modes, which operate at a + * fixed speed. + */ +-static int mtk_sgmii_setup_mode_force(struct mtk_sgmii *ss, int id, +- phy_interface_t interface) ++static int mtk_pcs_setup_mode_force(struct mtk_pcs *mpcs, ++ phy_interface_t interface) + { + unsigned int val; + +- if (!ss->regmap[id]) ++ if (!mpcs->regmap) + return -EINVAL; + +- regmap_read(ss->regmap[id], ss->ana_rgc3, &val); ++ regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val); + val &= ~RG_PHY_SPEED_MASK; + if (interface == PHY_INTERFACE_MODE_2500BASEX) + val |= RG_PHY_SPEED_3_125G; +- regmap_write(ss->regmap[id], ss->ana_rgc3, val); ++ regmap_write(mpcs->regmap, mpcs->ana_rgc3, val); + + /* Disable SGMII AN */ +- regmap_read(ss->regmap[id], SGMSYS_PCS_CONTROL_1, &val); ++ regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val); + val &= ~SGMII_AN_ENABLE; +- regmap_write(ss->regmap[id], SGMSYS_PCS_CONTROL_1, val); ++ regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val); + + /* Set the speed etc but leave the duplex unchanged */ +- regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val); ++ regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val); + val &= SGMII_DUPLEX_FULL | ~SGMII_IF_MODE_MASK; + val |= SGMII_SPEED_1000; +- regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val); ++ regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val); + + /* Release PHYA power down state */ +- regmap_read(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, &val); ++ regmap_read(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, &val); + val &= ~SGMII_PHYA_PWD; +- regmap_write(ss->regmap[id], SGMSYS_QPHY_PWR_STATE_CTRL, val); ++ regmap_write(mpcs->regmap, SGMSYS_QPHY_PWR_STATE_CTRL, val); + + return 0; + } +@@ -100,44 +81,76 @@ static int mtk_sgmii_setup_mode_force(st + int mtk_sgmii_config(struct mtk_sgmii *ss, int id, unsigned int mode, + phy_interface_t interface) + { ++ struct mtk_pcs *mpcs = &ss->pcs[id]; + int err = 0; + + /* Setup SGMIISYS with the determined property */ + if (interface != PHY_INTERFACE_MODE_SGMII) +- err = mtk_sgmii_setup_mode_force(ss, id, interface); ++ err = mtk_pcs_setup_mode_force(mpcs, interface); + else if (phylink_autoneg_inband(mode)) +- err = mtk_sgmii_setup_mode_an(ss, id); ++ err = mtk_pcs_setup_mode_an(mpcs); + + return err; + } + +-/* For 1000BASE-X and 2500BASE-X interface modes */ +-void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex) ++static void mtk_pcs_restart_an(struct mtk_pcs *mpcs) ++{ ++ unsigned int val; ++ ++ if (!mpcs->regmap) ++ return; ++ ++ regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val); ++ val |= SGMII_AN_RESTART; ++ regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val); ++} ++ ++static void mtk_pcs_link_up(struct mtk_pcs *mpcs, int speed, int duplex) + { + unsigned int val; + + /* SGMII force duplex setting */ +- regmap_read(ss->regmap[id], SGMSYS_SGMII_MODE, &val); ++ regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val); + val &= ~SGMII_DUPLEX_FULL; + if (duplex == DUPLEX_FULL) + val |= SGMII_DUPLEX_FULL; + +- regmap_write(ss->regmap[id], SGMSYS_SGMII_MODE, val); ++ regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val); ++} ++ ++/* For 1000BASE-X and 2500BASE-X interface modes */ ++void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex) ++{ ++ mtk_pcs_link_up(&ss->pcs[id], speed, duplex); ++} ++ ++int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3) ++{ ++ struct device_node *np; ++ int i; ++ ++ for (i = 0; i < MTK_MAX_DEVS; i++) { ++ np = of_parse_phandle(r, "mediatek,sgmiisys", i); ++ if (!np) ++ break; ++ ++ ss->pcs[i].ana_rgc3 = ana_rgc3; ++ ss->pcs[i].regmap = syscon_node_to_regmap(np); ++ of_node_put(np); ++ if (IS_ERR(ss->pcs[i].regmap)) ++ return PTR_ERR(ss->pcs[i].regmap); ++ } ++ ++ return 0; + } + + void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id) + { +- struct mtk_sgmii *ss = eth->sgmii; +- unsigned int val, sid; ++ unsigned int sid; + + /* Decide how GMAC and SGMIISYS be mapped */ + sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ? + 0 : mac_id; + +- if (!ss->regmap[sid]) +- return; +- +- regmap_read(ss->regmap[sid], SGMSYS_PCS_CONTROL_1, &val); +- val |= SGMII_AN_RESTART; +- regmap_write(ss->regmap[sid], SGMSYS_PCS_CONTROL_1, val); ++ mtk_pcs_restart_an(ð->sgmii->pcs[sid]); + } diff --git a/target/linux/generic/backport-5.15/704-18-v5.19-net-mtk_eth_soc-partially-convert-to-phylink_pcs.patch b/target/linux/generic/backport-5.15/704-18-v5.19-net-mtk_eth_soc-partially-convert-to-phylink_pcs.patch new file mode 100644 index 0000000000..df675e2899 --- /dev/null +++ b/target/linux/generic/backport-5.15/704-18-v5.19-net-mtk_eth_soc-partially-convert-to-phylink_pcs.patch @@ -0,0 +1,262 @@ +From 14a44ab0330d290fade1403a920e299cc56d7300 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Wed, 18 May 2022 15:55:28 +0100 +Subject: [PATCH 12/12] net: mtk_eth_soc: partially convert to phylink_pcs + +Partially convert mtk_eth_soc to phylink_pcs, moving the configuration, +link up and AN restart over. However, it seems mac_pcs_get_state() +doesn't actually get the state from the PCS, so we can't convert that +over without a better understanding of the hardware. + +Signed-off-by: Russell King (Oracle) +Signed-off-by: Jakub Kicinski +--- + drivers/net/ethernet/mediatek/mtk_eth_soc.c | 49 ++++++++---------- + drivers/net/ethernet/mediatek/mtk_eth_soc.h | 7 ++- + drivers/net/ethernet/mediatek/mtk_sgmii.c | 55 +++++++++++---------- + 3 files changed, 53 insertions(+), 58 deletions(-) + +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c +@@ -310,6 +310,25 @@ static void mtk_gmac0_rgmii_adjust(struc + mtk_w32(eth, val, TRGMII_TCK_CTRL); + } + ++static struct phylink_pcs *mtk_mac_select_pcs(struct phylink_config *config, ++ phy_interface_t interface) ++{ ++ struct mtk_mac *mac = container_of(config, struct mtk_mac, ++ phylink_config); ++ struct mtk_eth *eth = mac->hw; ++ unsigned int sid; ++ ++ if (interface == PHY_INTERFACE_MODE_SGMII || ++ phy_interface_mode_is_8023z(interface)) { ++ sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ? ++ 0 : mac->id; ++ ++ return mtk_sgmii_select_pcs(eth->sgmii, sid); ++ } ++ ++ return NULL; ++} ++ + static void mtk_mac_config(struct phylink_config *config, unsigned int mode, + const struct phylink_link_state *state) + { +@@ -317,7 +336,7 @@ static void mtk_mac_config(struct phylin + phylink_config); + struct mtk_eth *eth = mac->hw; + int val, ge_mode, err = 0; +- u32 sid, i; ++ u32 i; + + /* MT76x8 has no hardware settings between for the MAC */ + if (!MTK_HAS_CAPS(eth->soc->caps, MTK_SOC_MT7628) && +@@ -438,15 +457,6 @@ static void mtk_mac_config(struct phylin + SYSCFG0_SGMII_MASK, + ~(u32)SYSCFG0_SGMII_MASK); + +- /* Decide how GMAC and SGMIISYS be mapped */ +- sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ? +- 0 : mac->id; +- +- /* Setup SGMIISYS with the determined property */ +- err = mtk_sgmii_config(eth->sgmii, sid, mode, state->interface); +- if (err) +- goto init_err; +- + /* Save the syscfg0 value for mac_finish */ + mac->syscfg0 = val; + } else if (phylink_autoneg_inband(mode)) { +@@ -526,14 +536,6 @@ static void mtk_mac_pcs_get_state(struct + state->pause |= MLO_PAUSE_TX; + } + +-static void mtk_mac_an_restart(struct phylink_config *config) +-{ +- struct mtk_mac *mac = container_of(config, struct mtk_mac, +- phylink_config); +- +- mtk_sgmii_restart_an(mac->hw, mac->id); +-} +- + static void mtk_mac_link_down(struct phylink_config *config, unsigned int mode, + phy_interface_t interface) + { +@@ -554,15 +556,6 @@ static void mtk_mac_link_up(struct phyli + phylink_config); + u32 mcr; + +- if (phy_interface_mode_is_8023z(interface)) { +- struct mtk_eth *eth = mac->hw; +- +- /* Decide how GMAC and SGMIISYS be mapped */ +- int sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ? +- 0 : mac->id; +- mtk_sgmii_link_up(eth->sgmii, sid, speed, duplex); +- } +- + mcr = mtk_r32(mac->hw, MTK_MAC_MCR(mac->id)); + mcr &= ~(MAC_MCR_SPEED_100 | MAC_MCR_SPEED_1000 | + MAC_MCR_FORCE_DPX | MAC_MCR_FORCE_TX_FC | +@@ -595,8 +588,8 @@ static void mtk_mac_link_up(struct phyli + + static const struct phylink_mac_ops mtk_phylink_ops = { + .validate = phylink_generic_validate, ++ .mac_select_pcs = mtk_mac_select_pcs, + .mac_pcs_get_state = mtk_mac_pcs_get_state, +- .mac_an_restart = mtk_mac_an_restart, + .mac_config = mtk_mac_config, + .mac_finish = mtk_mac_finish, + .mac_link_down = mtk_mac_link_down, +--- a/drivers/net/ethernet/mediatek/mtk_eth_soc.h ++++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.h +@@ -963,10 +963,12 @@ struct mtk_soc_data { + * @regmap: The register map pointing at the range used to setup + * SGMII modes + * @ana_rgc3: The offset refers to register ANA_RGC3 related to regmap ++ * @pcs: Phylink PCS structure + */ + struct mtk_pcs { + struct regmap *regmap; + u32 ana_rgc3; ++ struct phylink_pcs pcs; + }; + + /* struct mtk_sgmii - This is the structure holding sgmii regmap and its +@@ -1106,12 +1108,9 @@ void mtk_stats_update_mac(struct mtk_mac + void mtk_w32(struct mtk_eth *eth, u32 val, unsigned reg); + u32 mtk_r32(struct mtk_eth *eth, unsigned reg); + ++struct phylink_pcs *mtk_sgmii_select_pcs(struct mtk_sgmii *ss, int id); + int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *np, + u32 ana_rgc3); +-int mtk_sgmii_config(struct mtk_sgmii *ss, int id, unsigned int mode, +- phy_interface_t interface); +-void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex); +-void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id); + + int mtk_gmac_sgmii_path_setup(struct mtk_eth *eth, int mac_id); + int mtk_gmac_gephy_path_setup(struct mtk_eth *eth, int mac_id); +--- a/drivers/net/ethernet/mediatek/mtk_sgmii.c ++++ b/drivers/net/ethernet/mediatek/mtk_sgmii.c +@@ -14,14 +14,16 @@ + + #include "mtk_eth_soc.h" + ++static struct mtk_pcs *pcs_to_mtk_pcs(struct phylink_pcs *pcs) ++{ ++ return container_of(pcs, struct mtk_pcs, pcs); ++} ++ + /* For SGMII interface mode */ + static int mtk_pcs_setup_mode_an(struct mtk_pcs *mpcs) + { + unsigned int val; + +- if (!mpcs->regmap) +- return -EINVAL; +- + /* Setup the link timer and QPHY power up inside SGMIISYS */ + regmap_write(mpcs->regmap, SGMSYS_PCS_LINK_TIMER, + SGMII_LINK_TIMER_DEFAULT); +@@ -50,9 +52,6 @@ static int mtk_pcs_setup_mode_force(stru + { + unsigned int val; + +- if (!mpcs->regmap) +- return -EINVAL; +- + regmap_read(mpcs->regmap, mpcs->ana_rgc3, &val); + val &= ~RG_PHY_SPEED_MASK; + if (interface == PHY_INTERFACE_MODE_2500BASEX) +@@ -78,10 +77,12 @@ static int mtk_pcs_setup_mode_force(stru + return 0; + } + +-int mtk_sgmii_config(struct mtk_sgmii *ss, int id, unsigned int mode, +- phy_interface_t interface) ++static int mtk_pcs_config(struct phylink_pcs *pcs, unsigned int mode, ++ phy_interface_t interface, ++ const unsigned long *advertising, ++ bool permit_pause_to_mac) + { +- struct mtk_pcs *mpcs = &ss->pcs[id]; ++ struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs); + int err = 0; + + /* Setup SGMIISYS with the determined property */ +@@ -93,22 +94,25 @@ int mtk_sgmii_config(struct mtk_sgmii *s + return err; + } + +-static void mtk_pcs_restart_an(struct mtk_pcs *mpcs) ++static void mtk_pcs_restart_an(struct phylink_pcs *pcs) + { ++ struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs); + unsigned int val; + +- if (!mpcs->regmap) +- return; +- + regmap_read(mpcs->regmap, SGMSYS_PCS_CONTROL_1, &val); + val |= SGMII_AN_RESTART; + regmap_write(mpcs->regmap, SGMSYS_PCS_CONTROL_1, val); + } + +-static void mtk_pcs_link_up(struct mtk_pcs *mpcs, int speed, int duplex) ++static void mtk_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode, ++ phy_interface_t interface, int speed, int duplex) + { ++ struct mtk_pcs *mpcs = pcs_to_mtk_pcs(pcs); + unsigned int val; + ++ if (!phy_interface_mode_is_8023z(interface)) ++ return; ++ + /* SGMII force duplex setting */ + regmap_read(mpcs->regmap, SGMSYS_SGMII_MODE, &val); + val &= ~SGMII_DUPLEX_FULL; +@@ -118,11 +122,11 @@ static void mtk_pcs_link_up(struct mtk_p + regmap_write(mpcs->regmap, SGMSYS_SGMII_MODE, val); + } + +-/* For 1000BASE-X and 2500BASE-X interface modes */ +-void mtk_sgmii_link_up(struct mtk_sgmii *ss, int id, int speed, int duplex) +-{ +- mtk_pcs_link_up(&ss->pcs[id], speed, duplex); +-} ++static const struct phylink_pcs_ops mtk_pcs_ops = { ++ .pcs_config = mtk_pcs_config, ++ .pcs_an_restart = mtk_pcs_restart_an, ++ .pcs_link_up = mtk_pcs_link_up, ++}; + + int mtk_sgmii_init(struct mtk_sgmii *ss, struct device_node *r, u32 ana_rgc3) + { +@@ -139,18 +143,17 @@ int mtk_sgmii_init(struct mtk_sgmii *ss, + of_node_put(np); + if (IS_ERR(ss->pcs[i].regmap)) + return PTR_ERR(ss->pcs[i].regmap); ++ ++ ss->pcs[i].pcs.ops = &mtk_pcs_ops; + } + + return 0; + } + +-void mtk_sgmii_restart_an(struct mtk_eth *eth, int mac_id) ++struct phylink_pcs *mtk_sgmii_select_pcs(struct mtk_sgmii *ss, int id) + { +- unsigned int sid; +- +- /* Decide how GMAC and SGMIISYS be mapped */ +- sid = (MTK_HAS_CAPS(eth->soc->caps, MTK_SHARED_SGMII)) ? +- 0 : mac_id; ++ if (!ss->pcs[id].regmap) ++ return NULL; + +- mtk_pcs_restart_an(ð->sgmii->pcs[sid]); ++ return &ss->pcs[id].pcs; + } diff --git a/target/linux/generic/backport-5.15/705-01-v5.17-net-dsa-mt7530-iterate-using-dsa_switch_for_each_use.patch b/target/linux/generic/backport-5.15/705-01-v5.17-net-dsa-mt7530-iterate-using-dsa_switch_for_each_use.patch new file mode 100644 index 0000000000..74567109c5 --- /dev/null +++ b/target/linux/generic/backport-5.15/705-01-v5.17-net-dsa-mt7530-iterate-using-dsa_switch_for_each_use.patch @@ -0,0 +1,106 @@ +From 505560028b6deb9b4385cf6100f05ca6f4aacaf8 Mon Sep 17 00:00:00 2001 +From: Vladimir Oltean +Date: Mon, 6 Dec 2021 18:57:49 +0200 +Subject: [PATCH 01/13] net: dsa: mt7530: iterate using + dsa_switch_for_each_user_port in bridging ops + +Avoid repeated calls to dsa_to_port() (some hidden behind dsa_is_user_port +and some in plain sight) by keeping two struct dsa_port references: one +to the port passed as argument, and another to the other ports of the +switch that we're iterating over. + +dsa_to_port(ds, i) gets replaced by other_dp, i gets replaced by +other_port which is derived from other_dp->index, dsa_is_user_port is +handled by the DSA iterator. + +Signed-off-by: Vladimir Oltean +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mt7530.c | 52 +++++++++++++++++++++++----------------- + 1 file changed, 30 insertions(+), 22 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1188,27 +1188,31 @@ static int + mt7530_port_bridge_join(struct dsa_switch *ds, int port, + struct net_device *bridge) + { +- struct mt7530_priv *priv = ds->priv; ++ struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; + u32 port_bitmap = BIT(MT7530_CPU_PORT); +- int i; ++ struct mt7530_priv *priv = ds->priv; + + mutex_lock(&priv->reg_mutex); + +- for (i = 0; i < MT7530_NUM_PORTS; i++) { ++ dsa_switch_for_each_user_port(other_dp, ds) { ++ int other_port = other_dp->index; ++ ++ if (dp == other_dp) ++ continue; ++ + /* Add this port to the port matrix of the other ports in the + * same bridge. If the port is disabled, port matrix is kept + * and not being setup until the port becomes enabled. + */ +- if (dsa_is_user_port(ds, i) && i != port) { +- if (dsa_to_port(ds, i)->bridge_dev != bridge) +- continue; +- if (priv->ports[i].enable) +- mt7530_set(priv, MT7530_PCR_P(i), +- PCR_MATRIX(BIT(port))); +- priv->ports[i].pm |= PCR_MATRIX(BIT(port)); ++ if (other_dp->bridge_dev != bridge) ++ continue; + +- port_bitmap |= BIT(i); +- } ++ if (priv->ports[other_port].enable) ++ mt7530_set(priv, MT7530_PCR_P(other_port), ++ PCR_MATRIX(BIT(port))); ++ priv->ports[other_port].pm |= PCR_MATRIX(BIT(port)); ++ ++ port_bitmap |= BIT(other_port); + } + + /* Add the all other ports to this port matrix. */ +@@ -1301,24 +1305,28 @@ static void + mt7530_port_bridge_leave(struct dsa_switch *ds, int port, + struct net_device *bridge) + { ++ struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; + struct mt7530_priv *priv = ds->priv; +- int i; + + mutex_lock(&priv->reg_mutex); + +- for (i = 0; i < MT7530_NUM_PORTS; i++) { ++ dsa_switch_for_each_user_port(other_dp, ds) { ++ int other_port = other_dp->index; ++ ++ if (dp == other_dp) ++ continue; ++ + /* Remove this port from the port matrix of the other ports + * in the same bridge. If the port is disabled, port matrix + * is kept and not being setup until the port becomes enabled. + */ +- if (dsa_is_user_port(ds, i) && i != port) { +- if (dsa_to_port(ds, i)->bridge_dev != bridge) +- continue; +- if (priv->ports[i].enable) +- mt7530_clear(priv, MT7530_PCR_P(i), +- PCR_MATRIX(BIT(port))); +- priv->ports[i].pm &= ~PCR_MATRIX(BIT(port)); +- } ++ if (other_dp->bridge_dev != bridge) ++ continue; ++ ++ if (priv->ports[other_port].enable) ++ mt7530_clear(priv, MT7530_PCR_P(other_port), ++ PCR_MATRIX(BIT(port))); ++ priv->ports[other_port].pm &= ~PCR_MATRIX(BIT(port)); + } + + /* Set the cpu port to be the only one in the port matrix of diff --git a/target/linux/generic/backport-5.15/705-02-v5.19-net-dsa-mt7530-populate-supported_interfaces-and-mac.patch b/target/linux/generic/backport-5.15/705-02-v5.19-net-dsa-mt7530-populate-supported_interfaces-and-mac.patch new file mode 100644 index 0000000000..690cc78fb5 --- /dev/null +++ b/target/linux/generic/backport-5.15/705-02-v5.19-net-dsa-mt7530-populate-supported_interfaces-and-mac.patch @@ -0,0 +1,166 @@ +From a1da54bcd664fc27169386db966575675ac3ccb0 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 11 Apr 2022 10:46:01 +0100 +Subject: [PATCH 02/13] net: dsa: mt7530: populate supported_interfaces and + mac_capabilities +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Populate the supported interfaces and MAC capabilities for mt7530, +mt7531 and mt7621 DSA switches. Filling this in will enable phylink +to pre-check the PHY interface mode against the the supported +interfaces bitmap prior to calling the validate function, and will +eventually allow us to convert to using the generic validation. + +Tested-by: Marek Behún +Signed-off-by: Russell King (Oracle) +Signed-off-by: Paolo Abeni +--- + drivers/net/dsa/mt7530.c | 74 ++++++++++++++++++++++++++++++++++++++++ + drivers/net/dsa/mt7530.h | 2 ++ + 2 files changed, 76 insertions(+) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2385,6 +2385,32 @@ mt7531_setup(struct dsa_switch *ds) + return 0; + } + ++static void mt7530_mac_port_get_caps(struct dsa_switch *ds, int port, ++ struct phylink_config *config) ++{ ++ switch (port) { ++ case 0 ... 4: /* Internal phy */ ++ __set_bit(PHY_INTERFACE_MODE_GMII, ++ config->supported_interfaces); ++ break; ++ ++ case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ ++ phy_interface_set_rgmii(config->supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_MII, ++ config->supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_GMII, ++ config->supported_interfaces); ++ break; ++ ++ case 6: /* 1st cpu port */ ++ __set_bit(PHY_INTERFACE_MODE_RGMII, ++ config->supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_TRGMII, ++ config->supported_interfaces); ++ break; ++ } ++} ++ + static bool + mt7530_phy_mode_supported(struct dsa_switch *ds, int port, + const struct phylink_link_state *state) +@@ -2421,6 +2447,37 @@ static bool mt7531_is_rgmii_port(struct + return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); + } + ++static void mt7531_mac_port_get_caps(struct dsa_switch *ds, int port, ++ struct phylink_config *config) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ ++ switch (port) { ++ case 0 ... 4: /* Internal phy */ ++ __set_bit(PHY_INTERFACE_MODE_GMII, ++ config->supported_interfaces); ++ break; ++ ++ case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ ++ if (mt7531_is_rgmii_port(priv, port)) { ++ phy_interface_set_rgmii(config->supported_interfaces); ++ break; ++ } ++ fallthrough; ++ ++ case 6: /* 1st cpu port supports sgmii/8023z only */ ++ __set_bit(PHY_INTERFACE_MODE_SGMII, ++ config->supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_1000BASEX, ++ config->supported_interfaces); ++ __set_bit(PHY_INTERFACE_MODE_2500BASEX, ++ config->supported_interfaces); ++ ++ config->mac_capabilities |= MAC_2500FD; ++ break; ++ } ++} ++ + static bool + mt7531_phy_mode_supported(struct dsa_switch *ds, int port, + const struct phylink_link_state *state) +@@ -2899,6 +2956,18 @@ mt7531_cpu_port_config(struct dsa_switch + return 0; + } + ++static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port, ++ struct phylink_config *config) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ ++ /* This switch only supports full-duplex at 1Gbps */ ++ config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | ++ MAC_10 | MAC_100 | MAC_1000FD; ++ ++ priv->info->mac_port_get_caps(ds, port, config); ++} ++ + static void + mt7530_mac_port_validate(struct dsa_switch *ds, int port, + unsigned long *supported) +@@ -3134,6 +3203,7 @@ static const struct dsa_switch_ops mt753 + .port_vlan_del = mt7530_port_vlan_del, + .port_mirror_add = mt753x_port_mirror_add, + .port_mirror_del = mt753x_port_mirror_del, ++ .phylink_get_caps = mt753x_phylink_get_caps, + .phylink_validate = mt753x_phylink_validate, + .phylink_mac_link_state = mt753x_phylink_mac_link_state, + .phylink_mac_config = mt753x_phylink_mac_config, +@@ -3151,6 +3221,7 @@ static const struct mt753x_info mt753x_t + .phy_read = mt7530_phy_read, + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, ++ .mac_port_get_caps = mt7530_mac_port_get_caps, + .phy_mode_supported = mt7530_phy_mode_supported, + .mac_port_validate = mt7530_mac_port_validate, + .mac_port_get_state = mt7530_phylink_mac_link_state, +@@ -3162,6 +3233,7 @@ static const struct mt753x_info mt753x_t + .phy_read = mt7530_phy_read, + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, ++ .mac_port_get_caps = mt7530_mac_port_get_caps, + .phy_mode_supported = mt7530_phy_mode_supported, + .mac_port_validate = mt7530_mac_port_validate, + .mac_port_get_state = mt7530_phylink_mac_link_state, +@@ -3174,6 +3246,7 @@ static const struct mt753x_info mt753x_t + .phy_write = mt7531_ind_phy_write, + .pad_setup = mt7531_pad_setup, + .cpu_port_config = mt7531_cpu_port_config, ++ .mac_port_get_caps = mt7531_mac_port_get_caps, + .phy_mode_supported = mt7531_phy_mode_supported, + .mac_port_validate = mt7531_mac_port_validate, + .mac_port_get_state = mt7531_phylink_mac_link_state, +@@ -3236,6 +3309,7 @@ mt7530_probe(struct mdio_device *mdiodev + */ + if (!priv->info->sw_setup || !priv->info->pad_setup || + !priv->info->phy_read || !priv->info->phy_write || ++ !priv->info->mac_port_get_caps || + !priv->info->phy_mode_supported || + !priv->info->mac_port_validate || + !priv->info->mac_port_get_state || !priv->info->mac_port_config) +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -769,6 +769,8 @@ struct mt753x_info { + int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val); + int (*pad_setup)(struct dsa_switch *ds, phy_interface_t interface); + int (*cpu_port_config)(struct dsa_switch *ds, int port); ++ void (*mac_port_get_caps)(struct dsa_switch *ds, int port, ++ struct phylink_config *config); + bool (*phy_mode_supported)(struct dsa_switch *ds, int port, + const struct phylink_link_state *state); + void (*mac_port_validate)(struct dsa_switch *ds, int port, diff --git a/target/linux/generic/backport-5.15/705-03-v5.19-net-dsa-mt7530-remove-interface-checks.patch b/target/linux/generic/backport-5.15/705-03-v5.19-net-dsa-mt7530-remove-interface-checks.patch new file mode 100644 index 0000000000..60eee013d1 --- /dev/null +++ b/target/linux/generic/backport-5.15/705-03-v5.19-net-dsa-mt7530-remove-interface-checks.patch @@ -0,0 +1,172 @@ +From e3f6719e2269868ca129b05da50cd55786848954 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 11 Apr 2022 10:46:06 +0100 +Subject: [PATCH 03/13] net: dsa: mt7530: remove interface checks +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +As phylink checks the interface mode against the supported_interfaces +bitmap, we no longer need to validate the interface mode, nor handle +PHY_INTERFACE_MODE_NA in the validation function. Remove these to +simplify the implementation. + +Tested-by: Marek Behún +Signed-off-by: Russell King (Oracle) +Signed-off-by: Paolo Abeni +--- + drivers/net/dsa/mt7530.c | 82 ---------------------------------------- + drivers/net/dsa/mt7530.h | 2 - + 2 files changed, 84 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2411,37 +2411,6 @@ static void mt7530_mac_port_get_caps(str + } + } + +-static bool +-mt7530_phy_mode_supported(struct dsa_switch *ds, int port, +- const struct phylink_link_state *state) +-{ +- struct mt7530_priv *priv = ds->priv; +- +- switch (port) { +- case 0 ... 4: /* Internal phy */ +- if (state->interface != PHY_INTERFACE_MODE_GMII) +- return false; +- break; +- case 5: /* 2nd cpu port with phy of port 0 or 4 / external phy */ +- if (!phy_interface_mode_is_rgmii(state->interface) && +- state->interface != PHY_INTERFACE_MODE_MII && +- state->interface != PHY_INTERFACE_MODE_GMII) +- return false; +- break; +- case 6: /* 1st cpu port */ +- if (state->interface != PHY_INTERFACE_MODE_RGMII && +- state->interface != PHY_INTERFACE_MODE_TRGMII) +- return false; +- break; +- default: +- dev_err(priv->dev, "%s: unsupported port: %i\n", __func__, +- port); +- return false; +- } +- +- return true; +-} +- + static bool mt7531_is_rgmii_port(struct mt7530_priv *priv, u32 port) + { + return (port == 5) && (priv->p5_intf_sel != P5_INTF_SEL_GMAC5_SGMII); +@@ -2478,44 +2447,6 @@ static void mt7531_mac_port_get_caps(str + } + } + +-static bool +-mt7531_phy_mode_supported(struct dsa_switch *ds, int port, +- const struct phylink_link_state *state) +-{ +- struct mt7530_priv *priv = ds->priv; +- +- switch (port) { +- case 0 ... 4: /* Internal phy */ +- if (state->interface != PHY_INTERFACE_MODE_GMII) +- return false; +- break; +- case 5: /* 2nd cpu port supports either rgmii or sgmii/8023z */ +- if (mt7531_is_rgmii_port(priv, port)) +- return phy_interface_mode_is_rgmii(state->interface); +- fallthrough; +- case 6: /* 1st cpu port supports sgmii/8023z only */ +- if (state->interface != PHY_INTERFACE_MODE_SGMII && +- !phy_interface_mode_is_8023z(state->interface)) +- return false; +- break; +- default: +- dev_err(priv->dev, "%s: unsupported port: %i\n", __func__, +- port); +- return false; +- } +- +- return true; +-} +- +-static bool +-mt753x_phy_mode_supported(struct dsa_switch *ds, int port, +- const struct phylink_link_state *state) +-{ +- struct mt7530_priv *priv = ds->priv; +- +- return priv->info->phy_mode_supported(ds, port, state); +-} +- + static int + mt753x_pad_setup(struct dsa_switch *ds, const struct phylink_link_state *state) + { +@@ -2770,9 +2701,6 @@ mt753x_phylink_mac_config(struct dsa_swi + struct mt7530_priv *priv = ds->priv; + u32 mcr_cur, mcr_new; + +- if (!mt753x_phy_mode_supported(ds, port, state)) +- goto unsupported; +- + switch (port) { + case 0 ... 4: /* Internal phy */ + if (state->interface != PHY_INTERFACE_MODE_GMII) +@@ -2990,12 +2918,6 @@ mt753x_phylink_validate(struct dsa_switc + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; + struct mt7530_priv *priv = ds->priv; + +- if (state->interface != PHY_INTERFACE_MODE_NA && +- !mt753x_phy_mode_supported(ds, port, state)) { +- linkmode_zero(supported); +- return; +- } +- + phylink_set_port_modes(mask); + + if (state->interface != PHY_INTERFACE_MODE_TRGMII && +@@ -3222,7 +3144,6 @@ static const struct mt753x_info mt753x_t + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .mac_port_get_caps = mt7530_mac_port_get_caps, +- .phy_mode_supported = mt7530_phy_mode_supported, + .mac_port_validate = mt7530_mac_port_validate, + .mac_port_get_state = mt7530_phylink_mac_link_state, + .mac_port_config = mt7530_mac_config, +@@ -3234,7 +3155,6 @@ static const struct mt753x_info mt753x_t + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .mac_port_get_caps = mt7530_mac_port_get_caps, +- .phy_mode_supported = mt7530_phy_mode_supported, + .mac_port_validate = mt7530_mac_port_validate, + .mac_port_get_state = mt7530_phylink_mac_link_state, + .mac_port_config = mt7530_mac_config, +@@ -3247,7 +3167,6 @@ static const struct mt753x_info mt753x_t + .pad_setup = mt7531_pad_setup, + .cpu_port_config = mt7531_cpu_port_config, + .mac_port_get_caps = mt7531_mac_port_get_caps, +- .phy_mode_supported = mt7531_phy_mode_supported, + .mac_port_validate = mt7531_mac_port_validate, + .mac_port_get_state = mt7531_phylink_mac_link_state, + .mac_port_config = mt7531_mac_config, +@@ -3310,7 +3229,6 @@ mt7530_probe(struct mdio_device *mdiodev + if (!priv->info->sw_setup || !priv->info->pad_setup || + !priv->info->phy_read || !priv->info->phy_write || + !priv->info->mac_port_get_caps || +- !priv->info->phy_mode_supported || + !priv->info->mac_port_validate || + !priv->info->mac_port_get_state || !priv->info->mac_port_config) + return -EINVAL; +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -771,8 +771,6 @@ struct mt753x_info { + int (*cpu_port_config)(struct dsa_switch *ds, int port); + void (*mac_port_get_caps)(struct dsa_switch *ds, int port, + struct phylink_config *config); +- bool (*phy_mode_supported)(struct dsa_switch *ds, int port, +- const struct phylink_link_state *state); + void (*mac_port_validate)(struct dsa_switch *ds, int port, + unsigned long *supported); + int (*mac_port_get_state)(struct dsa_switch *ds, int port, diff --git a/target/linux/generic/backport-5.15/705-04-v5.19-net-dsa-mt7530-drop-use-of-phylink_helper_basex_spee.patch b/target/linux/generic/backport-5.15/705-04-v5.19-net-dsa-mt7530-drop-use-of-phylink_helper_basex_spee.patch new file mode 100644 index 0000000000..22bb2068de --- /dev/null +++ b/target/linux/generic/backport-5.15/705-04-v5.19-net-dsa-mt7530-drop-use-of-phylink_helper_basex_spee.patch @@ -0,0 +1,34 @@ +From 58344a3b85f1bd5ffddfc2c11f6f2bf688b5f990 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 11 Apr 2022 10:46:12 +0100 +Subject: [PATCH 04/13] net: dsa: mt7530: drop use of + phylink_helper_basex_speed() +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Now that we have a better method to select SFP interface modes, we +no longer need to use phylink_helper_basex_speed() in a driver's +validation function. + +Tested-by: Marek Behún +Signed-off-by: Russell King (Oracle) +Signed-off-by: Paolo Abeni +--- + drivers/net/dsa/mt7530.c | 5 ----- + 1 file changed, 5 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2942,11 +2942,6 @@ mt753x_phylink_validate(struct dsa_switc + + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); +- +- /* We can only operate at 2500BaseX or 1000BaseX. If requested +- * to advertise both, only report advertising at 2500BaseX. +- */ +- phylink_helper_basex_speed(state); + } + + static int diff --git a/target/linux/generic/backport-5.15/705-05-v5.19-net-dsa-mt7530-only-indicate-linkmodes-that-can-be-s.patch b/target/linux/generic/backport-5.15/705-05-v5.19-net-dsa-mt7530-only-indicate-linkmodes-that-can-be-s.patch new file mode 100644 index 0000000000..d5d7c54974 --- /dev/null +++ b/target/linux/generic/backport-5.15/705-05-v5.19-net-dsa-mt7530-only-indicate-linkmodes-that-can-be-s.patch @@ -0,0 +1,86 @@ +From 3c1d788a62dc648d1846049b66119ebb69dedd52 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 11 Apr 2022 10:46:17 +0100 +Subject: [PATCH 05/13] net: dsa: mt7530: only indicate linkmodes that can be + supported +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Now that mt7530 is not using the basex helper, it becomes unnecessary to +indicate support for both 1000baseX and 2500baseX when one of the 803.3z +PHY interface modes is being selected. Ensure that the driver indicates +only those linkmodes that can actually be supported by the PHY interface +mode. + +Tested-by: Marek Behún +Signed-off-by: Russell King (Oracle) +Signed-off-by: Paolo Abeni +--- + drivers/net/dsa/mt7530.c | 12 ++++++++---- + drivers/net/dsa/mt7530.h | 1 + + 2 files changed, 9 insertions(+), 4 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2518,12 +2518,13 @@ static int mt7531_rgmii_setup(struct mt7 + } + + static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port, ++ phy_interface_t interface, + unsigned long *supported) + { + /* Port5 supports ethier RGMII or SGMII. + * Port6 supports SGMII only. + */ +- if (port == 6) { ++ if (port == 6 && interface == PHY_INTERFACE_MODE_2500BASEX) { + phylink_set(supported, 2500baseX_Full); + phylink_set(supported, 2500baseT_Full); + } +@@ -2898,16 +2899,18 @@ static void mt753x_phylink_get_caps(stru + + static void + mt7530_mac_port_validate(struct dsa_switch *ds, int port, ++ phy_interface_t interface, + unsigned long *supported) + { + } + + static void mt7531_mac_port_validate(struct dsa_switch *ds, int port, ++ phy_interface_t interface, + unsigned long *supported) + { + struct mt7530_priv *priv = ds->priv; + +- mt7531_sgmii_validate(priv, port, supported); ++ mt7531_sgmii_validate(priv, port, interface, supported); + } + + static void +@@ -2930,12 +2933,13 @@ mt753x_phylink_validate(struct dsa_switc + } + + /* This switch only supports 1G full-duplex. */ +- if (state->interface != PHY_INTERFACE_MODE_MII) { ++ if (state->interface != PHY_INTERFACE_MODE_MII && ++ state->interface != PHY_INTERFACE_MODE_2500BASEX) { + phylink_set(mask, 1000baseT_Full); + phylink_set(mask, 1000baseX_Full); + } + +- priv->info->mac_port_validate(ds, port, mask); ++ priv->info->mac_port_validate(ds, port, state->interface, mask); + + phylink_set(mask, Pause); + phylink_set(mask, Asym_Pause); +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -772,6 +772,7 @@ struct mt753x_info { + void (*mac_port_get_caps)(struct dsa_switch *ds, int port, + struct phylink_config *config); + void (*mac_port_validate)(struct dsa_switch *ds, int port, ++ phy_interface_t interface, + unsigned long *supported); + int (*mac_port_get_state)(struct dsa_switch *ds, int port, + struct phylink_link_state *state); diff --git a/target/linux/generic/backport-5.15/705-06-v5.19-net-dsa-mt7530-switch-to-use-phylink_get_linkmodes.patch b/target/linux/generic/backport-5.15/705-06-v5.19-net-dsa-mt7530-switch-to-use-phylink_get_linkmodes.patch new file mode 100644 index 0000000000..4a2c2f151d --- /dev/null +++ b/target/linux/generic/backport-5.15/705-06-v5.19-net-dsa-mt7530-switch-to-use-phylink_get_linkmodes.patch @@ -0,0 +1,131 @@ +From 1c2211cb15dd3957fb26c0e1615eceb5db851ad6 Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 11 Apr 2022 10:46:22 +0100 +Subject: [PATCH 06/13] net: dsa: mt7530: switch to use phylink_get_linkmodes() +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Switch mt7530 to use phylink_get_linkmodes() to generate the ethtool +linkmodes that can be supported. We are unable to use the generic +helper for this as pause modes are dependent on the interface as +the Autoneg bit depends on the interface mode. + +Tested-by: Marek Behún +Signed-off-by: Russell King (Oracle) +Signed-off-by: Paolo Abeni +--- + drivers/net/dsa/mt7530.c | 57 ++++------------------------------------ + 1 file changed, 5 insertions(+), 52 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2517,19 +2517,6 @@ static int mt7531_rgmii_setup(struct mt7 + return 0; + } + +-static void mt7531_sgmii_validate(struct mt7530_priv *priv, int port, +- phy_interface_t interface, +- unsigned long *supported) +-{ +- /* Port5 supports ethier RGMII or SGMII. +- * Port6 supports SGMII only. +- */ +- if (port == 6 && interface == PHY_INTERFACE_MODE_2500BASEX) { +- phylink_set(supported, 2500baseX_Full); +- phylink_set(supported, 2500baseT_Full); +- } +-} +- + static void + mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port, + unsigned int mode, phy_interface_t interface, +@@ -2898,51 +2885,21 @@ static void mt753x_phylink_get_caps(stru + } + + static void +-mt7530_mac_port_validate(struct dsa_switch *ds, int port, +- phy_interface_t interface, +- unsigned long *supported) +-{ +-} +- +-static void mt7531_mac_port_validate(struct dsa_switch *ds, int port, +- phy_interface_t interface, +- unsigned long *supported) +-{ +- struct mt7530_priv *priv = ds->priv; +- +- mt7531_sgmii_validate(priv, port, interface, supported); +-} +- +-static void + mt753x_phylink_validate(struct dsa_switch *ds, int port, + unsigned long *supported, + struct phylink_link_state *state) + { + __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; +- struct mt7530_priv *priv = ds->priv; ++ u32 caps; ++ ++ caps = dsa_to_port(ds, port)->pl_config.mac_capabilities; + + phylink_set_port_modes(mask); ++ phylink_get_linkmodes(mask, state->interface, caps); + + if (state->interface != PHY_INTERFACE_MODE_TRGMII && +- !phy_interface_mode_is_8023z(state->interface)) { +- phylink_set(mask, 10baseT_Half); +- phylink_set(mask, 10baseT_Full); +- phylink_set(mask, 100baseT_Half); +- phylink_set(mask, 100baseT_Full); ++ !phy_interface_mode_is_8023z(state->interface)) + phylink_set(mask, Autoneg); +- } +- +- /* This switch only supports 1G full-duplex. */ +- if (state->interface != PHY_INTERFACE_MODE_MII && +- state->interface != PHY_INTERFACE_MODE_2500BASEX) { +- phylink_set(mask, 1000baseT_Full); +- phylink_set(mask, 1000baseX_Full); +- } +- +- priv->info->mac_port_validate(ds, port, state->interface, mask); +- +- phylink_set(mask, Pause); +- phylink_set(mask, Asym_Pause); + + linkmode_and(supported, supported, mask); + linkmode_and(state->advertising, state->advertising, mask); +@@ -3143,7 +3100,6 @@ static const struct mt753x_info mt753x_t + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .mac_port_get_caps = mt7530_mac_port_get_caps, +- .mac_port_validate = mt7530_mac_port_validate, + .mac_port_get_state = mt7530_phylink_mac_link_state, + .mac_port_config = mt7530_mac_config, + }, +@@ -3154,7 +3110,6 @@ static const struct mt753x_info mt753x_t + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .mac_port_get_caps = mt7530_mac_port_get_caps, +- .mac_port_validate = mt7530_mac_port_validate, + .mac_port_get_state = mt7530_phylink_mac_link_state, + .mac_port_config = mt7530_mac_config, + }, +@@ -3166,7 +3121,6 @@ static const struct mt753x_info mt753x_t + .pad_setup = mt7531_pad_setup, + .cpu_port_config = mt7531_cpu_port_config, + .mac_port_get_caps = mt7531_mac_port_get_caps, +- .mac_port_validate = mt7531_mac_port_validate, + .mac_port_get_state = mt7531_phylink_mac_link_state, + .mac_port_config = mt7531_mac_config, + .mac_pcs_an_restart = mt7531_sgmii_restart_an, +@@ -3228,7 +3182,6 @@ mt7530_probe(struct mdio_device *mdiodev + if (!priv->info->sw_setup || !priv->info->pad_setup || + !priv->info->phy_read || !priv->info->phy_write || + !priv->info->mac_port_get_caps || +- !priv->info->mac_port_validate || + !priv->info->mac_port_get_state || !priv->info->mac_port_config) + return -EINVAL; + diff --git a/target/linux/generic/backport-5.15/705-07-v5.19-net-dsa-mt7530-partially-convert-to-phylink_pcs.patch b/target/linux/generic/backport-5.15/705-07-v5.19-net-dsa-mt7530-partially-convert-to-phylink_pcs.patch new file mode 100644 index 0000000000..8a66b7fb0b --- /dev/null +++ b/target/linux/generic/backport-5.15/705-07-v5.19-net-dsa-mt7530-partially-convert-to-phylink_pcs.patch @@ -0,0 +1,385 @@ +From fd993fd59d96d5e2d5972ec4ca1f9651025c987b Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 11 Apr 2022 10:46:27 +0100 +Subject: [PATCH 07/13] net: dsa: mt7530: partially convert to phylink_pcs +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Partially convert the mt7530 driver to use phylink's PCS support. This +is a partial implementation as we don't move anything into the +pcs_config method yet - this driver supports SGMII or 1000BASE-X +without in-band. + +Tested-by: Marek Behún +Signed-off-by: Russell King (Oracle) +Signed-off-by: Paolo Abeni +--- + drivers/net/dsa/mt7530.c | 144 +++++++++++++++++++++++---------------- + drivers/net/dsa/mt7530.h | 21 +++--- + 2 files changed, 95 insertions(+), 70 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -24,6 +24,11 @@ + + #include "mt7530.h" + ++static struct mt753x_pcs *pcs_to_mt753x_pcs(struct phylink_pcs *pcs) ++{ ++ return container_of(pcs, struct mt753x_pcs, pcs); ++} ++ + /* String, offset, and register size in bytes if different from 4 bytes */ + static const struct mt7530_mib_desc mt7530_mib[] = { + MIB_DESC(1, 0x00, "TxDrop"), +@@ -2517,12 +2522,11 @@ static int mt7531_rgmii_setup(struct mt7 + return 0; + } + +-static void +-mt7531_sgmii_link_up_force(struct dsa_switch *ds, int port, +- unsigned int mode, phy_interface_t interface, +- int speed, int duplex) ++static void mt7531_pcs_link_up(struct phylink_pcs *pcs, unsigned int mode, ++ phy_interface_t interface, int speed, int duplex) + { +- struct mt7530_priv *priv = ds->priv; ++ struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; ++ int port = pcs_to_mt753x_pcs(pcs)->port; + unsigned int val; + + /* For adjusting speed and duplex of SGMII force mode. */ +@@ -2548,6 +2552,9 @@ mt7531_sgmii_link_up_force(struct dsa_sw + + /* MT7531 SGMII 1G force mode can only work in full duplex mode, + * no matter MT7531_SGMII_FORCE_HALF_DUPLEX is set or not. ++ * ++ * The speed check is unnecessary as the MAC capabilities apply ++ * this restriction. --rmk + */ + if ((speed == SPEED_10 || speed == SPEED_100) && + duplex != DUPLEX_FULL) +@@ -2623,9 +2630,10 @@ static int mt7531_sgmii_setup_mode_an(st + return 0; + } + +-static void mt7531_sgmii_restart_an(struct dsa_switch *ds, int port) ++static void mt7531_pcs_an_restart(struct phylink_pcs *pcs) + { +- struct mt7530_priv *priv = ds->priv; ++ struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; ++ int port = pcs_to_mt753x_pcs(pcs)->port; + u32 val; + + /* Only restart AN when AN is enabled */ +@@ -2682,6 +2690,24 @@ mt753x_mac_config(struct dsa_switch *ds, + return priv->info->mac_port_config(ds, port, mode, state->interface); + } + ++static struct phylink_pcs * ++mt753x_phylink_mac_select_pcs(struct dsa_switch *ds, int port, ++ phy_interface_t interface) ++{ ++ struct mt7530_priv *priv = ds->priv; ++ ++ switch (interface) { ++ case PHY_INTERFACE_MODE_TRGMII: ++ case PHY_INTERFACE_MODE_SGMII: ++ case PHY_INTERFACE_MODE_1000BASEX: ++ case PHY_INTERFACE_MODE_2500BASEX: ++ return &priv->pcs[port].pcs; ++ ++ default: ++ return NULL; ++ } ++} ++ + static void + mt753x_phylink_mac_config(struct dsa_switch *ds, int port, unsigned int mode, + const struct phylink_link_state *state) +@@ -2743,17 +2769,6 @@ unsupported: + mt7530_write(priv, MT7530_PMCR_P(port), mcr_new); + } + +-static void +-mt753x_phylink_mac_an_restart(struct dsa_switch *ds, int port) +-{ +- struct mt7530_priv *priv = ds->priv; +- +- if (!priv->info->mac_pcs_an_restart) +- return; +- +- priv->info->mac_pcs_an_restart(ds, port); +-} +- + static void mt753x_phylink_mac_link_down(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface) +@@ -2763,16 +2778,13 @@ static void mt753x_phylink_mac_link_down + mt7530_clear(priv, MT7530_PMCR_P(port), PMCR_LINK_SETTINGS_MASK); + } + +-static void mt753x_mac_pcs_link_up(struct dsa_switch *ds, int port, +- unsigned int mode, phy_interface_t interface, +- int speed, int duplex) ++static void mt753x_phylink_pcs_link_up(struct phylink_pcs *pcs, ++ unsigned int mode, ++ phy_interface_t interface, ++ int speed, int duplex) + { +- struct mt7530_priv *priv = ds->priv; +- +- if (!priv->info->mac_pcs_link_up) +- return; +- +- priv->info->mac_pcs_link_up(ds, port, mode, interface, speed, duplex); ++ if (pcs->ops->pcs_link_up) ++ pcs->ops->pcs_link_up(pcs, mode, interface, speed, duplex); + } + + static void mt753x_phylink_mac_link_up(struct dsa_switch *ds, int port, +@@ -2785,8 +2797,6 @@ static void mt753x_phylink_mac_link_up(s + struct mt7530_priv *priv = ds->priv; + u32 mcr; + +- mt753x_mac_pcs_link_up(ds, port, mode, interface, speed, duplex); +- + mcr = PMCR_RX_EN | PMCR_TX_EN | PMCR_FORCE_LNK; + + /* MT753x MAC works in 1G full duplex mode for all up-clocked +@@ -2866,6 +2876,8 @@ mt7531_cpu_port_config(struct dsa_switch + return ret; + mt7530_write(priv, MT7530_PMCR_P(port), + PMCR_CPU_PORT_SETTING(priv->id)); ++ mt753x_phylink_pcs_link_up(&priv->pcs[port].pcs, MLO_AN_FIXED, ++ interface, speed, DUPLEX_FULL); + mt753x_phylink_mac_link_up(ds, port, MLO_AN_FIXED, interface, NULL, + speed, DUPLEX_FULL, true, true); + +@@ -2905,16 +2917,13 @@ mt753x_phylink_validate(struct dsa_switc + linkmode_and(state->advertising, state->advertising, mask); + } + +-static int +-mt7530_phylink_mac_link_state(struct dsa_switch *ds, int port, +- struct phylink_link_state *state) ++static void mt7530_pcs_get_state(struct phylink_pcs *pcs, ++ struct phylink_link_state *state) + { +- struct mt7530_priv *priv = ds->priv; ++ struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; ++ int port = pcs_to_mt753x_pcs(pcs)->port; + u32 pmsr; + +- if (port < 0 || port >= MT7530_NUM_PORTS) +- return -EINVAL; +- + pmsr = mt7530_read(priv, MT7530_PMSR_P(port)); + + state->link = (pmsr & PMSR_LINK); +@@ -2941,8 +2950,6 @@ mt7530_phylink_mac_link_state(struct dsa + state->pause |= MLO_PAUSE_RX; + if (pmsr & PMSR_TX_FC) + state->pause |= MLO_PAUSE_TX; +- +- return 1; + } + + static int +@@ -2984,32 +2991,49 @@ mt7531_sgmii_pcs_get_state_an(struct mt7 + return 0; + } + +-static int +-mt7531_phylink_mac_link_state(struct dsa_switch *ds, int port, +- struct phylink_link_state *state) ++static void mt7531_pcs_get_state(struct phylink_pcs *pcs, ++ struct phylink_link_state *state) + { +- struct mt7530_priv *priv = ds->priv; ++ struct mt7530_priv *priv = pcs_to_mt753x_pcs(pcs)->priv; ++ int port = pcs_to_mt753x_pcs(pcs)->port; + + if (state->interface == PHY_INTERFACE_MODE_SGMII) +- return mt7531_sgmii_pcs_get_state_an(priv, port, state); +- +- return -EOPNOTSUPP; ++ mt7531_sgmii_pcs_get_state_an(priv, port, state); ++ else ++ state->link = false; + } + +-static int +-mt753x_phylink_mac_link_state(struct dsa_switch *ds, int port, +- struct phylink_link_state *state) ++static int mt753x_pcs_config(struct phylink_pcs *pcs, unsigned int mode, ++ phy_interface_t interface, ++ const unsigned long *advertising, ++ bool permit_pause_to_mac) + { +- struct mt7530_priv *priv = ds->priv; ++ return 0; ++} + +- return priv->info->mac_port_get_state(ds, port, state); ++static void mt7530_pcs_an_restart(struct phylink_pcs *pcs) ++{ + } + ++static const struct phylink_pcs_ops mt7530_pcs_ops = { ++ .pcs_get_state = mt7530_pcs_get_state, ++ .pcs_config = mt753x_pcs_config, ++ .pcs_an_restart = mt7530_pcs_an_restart, ++}; ++ ++static const struct phylink_pcs_ops mt7531_pcs_ops = { ++ .pcs_get_state = mt7531_pcs_get_state, ++ .pcs_config = mt753x_pcs_config, ++ .pcs_an_restart = mt7531_pcs_an_restart, ++ .pcs_link_up = mt7531_pcs_link_up, ++}; ++ + static int + mt753x_setup(struct dsa_switch *ds) + { + struct mt7530_priv *priv = ds->priv; + int ret = priv->info->sw_setup(ds); ++ int i; + + if (ret) + return ret; +@@ -3022,6 +3046,13 @@ mt753x_setup(struct dsa_switch *ds) + if (ret && priv->irq) + mt7530_free_irq_common(priv); + ++ /* Initialise the PCS devices */ ++ for (i = 0; i < priv->ds->num_ports; i++) { ++ priv->pcs[i].pcs.ops = priv->info->pcs_ops; ++ priv->pcs[i].priv = priv; ++ priv->pcs[i].port = i; ++ } ++ + return ret; + } + +@@ -3083,9 +3114,8 @@ static const struct dsa_switch_ops mt753 + .port_mirror_del = mt753x_port_mirror_del, + .phylink_get_caps = mt753x_phylink_get_caps, + .phylink_validate = mt753x_phylink_validate, +- .phylink_mac_link_state = mt753x_phylink_mac_link_state, ++ .phylink_mac_select_pcs = mt753x_phylink_mac_select_pcs, + .phylink_mac_config = mt753x_phylink_mac_config, +- .phylink_mac_an_restart = mt753x_phylink_mac_an_restart, + .phylink_mac_link_down = mt753x_phylink_mac_link_down, + .phylink_mac_link_up = mt753x_phylink_mac_link_up, + .get_mac_eee = mt753x_get_mac_eee, +@@ -3095,36 +3125,34 @@ static const struct dsa_switch_ops mt753 + static const struct mt753x_info mt753x_table[] = { + [ID_MT7621] = { + .id = ID_MT7621, ++ .pcs_ops = &mt7530_pcs_ops, + .sw_setup = mt7530_setup, + .phy_read = mt7530_phy_read, + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .mac_port_get_caps = mt7530_mac_port_get_caps, +- .mac_port_get_state = mt7530_phylink_mac_link_state, + .mac_port_config = mt7530_mac_config, + }, + [ID_MT7530] = { + .id = ID_MT7530, ++ .pcs_ops = &mt7530_pcs_ops, + .sw_setup = mt7530_setup, + .phy_read = mt7530_phy_read, + .phy_write = mt7530_phy_write, + .pad_setup = mt7530_pad_clk_setup, + .mac_port_get_caps = mt7530_mac_port_get_caps, +- .mac_port_get_state = mt7530_phylink_mac_link_state, + .mac_port_config = mt7530_mac_config, + }, + [ID_MT7531] = { + .id = ID_MT7531, ++ .pcs_ops = &mt7531_pcs_ops, + .sw_setup = mt7531_setup, + .phy_read = mt7531_ind_phy_read, + .phy_write = mt7531_ind_phy_write, + .pad_setup = mt7531_pad_setup, + .cpu_port_config = mt7531_cpu_port_config, + .mac_port_get_caps = mt7531_mac_port_get_caps, +- .mac_port_get_state = mt7531_phylink_mac_link_state, + .mac_port_config = mt7531_mac_config, +- .mac_pcs_an_restart = mt7531_sgmii_restart_an, +- .mac_pcs_link_up = mt7531_sgmii_link_up_force, + }, + }; + +@@ -3182,7 +3210,7 @@ mt7530_probe(struct mdio_device *mdiodev + if (!priv->info->sw_setup || !priv->info->pad_setup || + !priv->info->phy_read || !priv->info->phy_write || + !priv->info->mac_port_get_caps || +- !priv->info->mac_port_get_state || !priv->info->mac_port_config) ++ !priv->info->mac_port_config) + return -EINVAL; + + priv->id = priv->info->id; +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -741,6 +741,12 @@ static const char *p5_intf_modes(unsigne + + struct mt7530_priv; + ++struct mt753x_pcs { ++ struct phylink_pcs pcs; ++ struct mt7530_priv *priv; ++ int port; ++}; ++ + /* struct mt753x_info - This is the main data structure for holding the specific + * part for each supported device + * @sw_setup: Holding the handler to a device initialization +@@ -752,18 +758,14 @@ struct mt7530_priv; + * port + * @mac_port_validate: Holding the way to set addition validate type for a + * certan MAC port +- * @mac_port_get_state: Holding the way getting the MAC/PCS state for a certain +- * MAC port + * @mac_port_config: Holding the way setting up the PHY attribute to a + * certain MAC port +- * @mac_pcs_an_restart Holding the way restarting PCS autonegotiation for a +- * certain MAC port +- * @mac_pcs_link_up: Holding the way setting up the PHY attribute to the pcs +- * of the certain MAC port + */ + struct mt753x_info { + enum mt753x_id id; + ++ const struct phylink_pcs_ops *pcs_ops; ++ + int (*sw_setup)(struct dsa_switch *ds); + int (*phy_read)(struct mt7530_priv *priv, int port, int regnum); + int (*phy_write)(struct mt7530_priv *priv, int port, int regnum, u16 val); +@@ -774,15 +776,9 @@ struct mt753x_info { + void (*mac_port_validate)(struct dsa_switch *ds, int port, + phy_interface_t interface, + unsigned long *supported); +- int (*mac_port_get_state)(struct dsa_switch *ds, int port, +- struct phylink_link_state *state); + int (*mac_port_config)(struct dsa_switch *ds, int port, + unsigned int mode, + phy_interface_t interface); +- void (*mac_pcs_an_restart)(struct dsa_switch *ds, int port); +- void (*mac_pcs_link_up)(struct dsa_switch *ds, int port, +- unsigned int mode, phy_interface_t interface, +- int speed, int duplex); + }; + + /* struct mt7530_priv - This is the main data structure for holding the state +@@ -824,6 +820,7 @@ struct mt7530_priv { + u8 mirror_tx; + + struct mt7530_port ports[MT7530_NUM_PORTS]; ++ struct mt753x_pcs pcs[MT7530_NUM_PORTS]; + /* protect among processes for registers access*/ + struct mutex reg_mutex; + int irq; diff --git a/target/linux/generic/backport-5.15/705-08-v5.19-net-dsa-mt7530-move-autoneg-handling-to-PCS-validati.patch b/target/linux/generic/backport-5.15/705-08-v5.19-net-dsa-mt7530-move-autoneg-handling-to-PCS-validati.patch new file mode 100644 index 0000000000..2d8b4d5d57 --- /dev/null +++ b/target/linux/generic/backport-5.15/705-08-v5.19-net-dsa-mt7530-move-autoneg-handling-to-PCS-validati.patch @@ -0,0 +1,80 @@ +From 2b0ee6768f3ac09072e5fd60b36580924e1cfa1c Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 11 Apr 2022 10:46:32 +0100 +Subject: [PATCH 08/13] net: dsa: mt7530: move autoneg handling to PCS + validation +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Move the autoneg bit handling to the PCS validation, which allows us to +get rid of mt753x_phylink_validate() and rely on the default +phylink_generic_validate() implementation for the MAC side. + +Tested-by: Marek Behún +Signed-off-by: Russell King (Oracle) +Signed-off-by: Paolo Abeni +--- + drivers/net/dsa/mt7530.c | 28 ++++++++++------------------ + 1 file changed, 10 insertions(+), 18 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2896,25 +2896,16 @@ static void mt753x_phylink_get_caps(stru + priv->info->mac_port_get_caps(ds, port, config); + } + +-static void +-mt753x_phylink_validate(struct dsa_switch *ds, int port, +- unsigned long *supported, +- struct phylink_link_state *state) +-{ +- __ETHTOOL_DECLARE_LINK_MODE_MASK(mask) = { 0, }; +- u32 caps; +- +- caps = dsa_to_port(ds, port)->pl_config.mac_capabilities; +- +- phylink_set_port_modes(mask); +- phylink_get_linkmodes(mask, state->interface, caps); ++static int mt753x_pcs_validate(struct phylink_pcs *pcs, ++ unsigned long *supported, ++ const struct phylink_link_state *state) ++{ ++ /* Autonegotiation is not supported in TRGMII nor 802.3z modes */ ++ if (state->interface == PHY_INTERFACE_MODE_TRGMII || ++ phy_interface_mode_is_8023z(state->interface)) ++ phylink_clear(supported, Autoneg); + +- if (state->interface != PHY_INTERFACE_MODE_TRGMII && +- !phy_interface_mode_is_8023z(state->interface)) +- phylink_set(mask, Autoneg); +- +- linkmode_and(supported, supported, mask); +- linkmode_and(state->advertising, state->advertising, mask); ++ return 0; + } + + static void mt7530_pcs_get_state(struct phylink_pcs *pcs, +@@ -3016,12 +3007,14 @@ static void mt7530_pcs_an_restart(struct + } + + static const struct phylink_pcs_ops mt7530_pcs_ops = { ++ .pcs_validate = mt753x_pcs_validate, + .pcs_get_state = mt7530_pcs_get_state, + .pcs_config = mt753x_pcs_config, + .pcs_an_restart = mt7530_pcs_an_restart, + }; + + static const struct phylink_pcs_ops mt7531_pcs_ops = { ++ .pcs_validate = mt753x_pcs_validate, + .pcs_get_state = mt7531_pcs_get_state, + .pcs_config = mt753x_pcs_config, + .pcs_an_restart = mt7531_pcs_an_restart, +@@ -3113,7 +3106,6 @@ static const struct dsa_switch_ops mt753 + .port_mirror_add = mt753x_port_mirror_add, + .port_mirror_del = mt753x_port_mirror_del, + .phylink_get_caps = mt753x_phylink_get_caps, +- .phylink_validate = mt753x_phylink_validate, + .phylink_mac_select_pcs = mt753x_phylink_mac_select_pcs, + .phylink_mac_config = mt753x_phylink_mac_config, + .phylink_mac_link_down = mt753x_phylink_mac_link_down, diff --git a/target/linux/generic/backport-5.15/705-09-v5.19-net-dsa-mt7530-mark-as-non-legacy.patch b/target/linux/generic/backport-5.15/705-09-v5.19-net-dsa-mt7530-mark-as-non-legacy.patch new file mode 100644 index 0000000000..849a9925a1 --- /dev/null +++ b/target/linux/generic/backport-5.15/705-09-v5.19-net-dsa-mt7530-mark-as-non-legacy.patch @@ -0,0 +1,34 @@ +From 5bc26de9bfaa6bb5539c09d4435dced98f429cfc Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 11 Apr 2022 10:46:37 +0100 +Subject: [PATCH 09/13] net: dsa: mt7530: mark as non-legacy +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +The mt7530 driver does not make use of the speed, duplex, pause or +advertisement in its phylink_mac_config() implementation, so it can be +marked as a non-legacy driver. + +Tested-by: Marek Behún +Signed-off-by: Russell King (Oracle) +Signed-off-by: Paolo Abeni +--- + drivers/net/dsa/mt7530.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2893,6 +2893,12 @@ static void mt753x_phylink_get_caps(stru + config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | + MAC_10 | MAC_100 | MAC_1000FD; + ++ /* This driver does not make use of the speed, duplex, pause or the ++ * advertisement in its mac_config, so it is safe to mark this driver ++ * as non-legacy. ++ */ ++ config->legacy_pre_march2020 = false; ++ + priv->info->mac_port_get_caps(ds, port, config); + } + diff --git a/target/linux/generic/backport-5.15/705-10-v5.19-net-dsa-mt753x-fix-pcs-conversion-regression.patch b/target/linux/generic/backport-5.15/705-10-v5.19-net-dsa-mt753x-fix-pcs-conversion-regression.patch new file mode 100644 index 0000000000..89f6e7509b --- /dev/null +++ b/target/linux/generic/backport-5.15/705-10-v5.19-net-dsa-mt753x-fix-pcs-conversion-regression.patch @@ -0,0 +1,116 @@ +From 1f15b5e8733115cee65342bcaafeaf0368809fae Mon Sep 17 00:00:00 2001 +From: "Russell King (Oracle)" +Date: Mon, 25 Apr 2022 22:28:02 +0100 +Subject: [PATCH 10/13] net: dsa: mt753x: fix pcs conversion regression + +Daniel Golle reports that the conversion of mt753x to phylink PCS caused +an oops as below. + +The problem is with the placement of the PCS initialisation, which +occurs after mt7531_setup() has been called. However, burited in this +function is a call to setup the CPU port, which requires the PCS +structure to be already setup. + +Fix this by changing the initialisation order. + +Unable to handle kernel NULL pointer dereference at virtual address 0000000000000020 +Mem abort info: + ESR = 0x96000005 + EC = 0x25: DABT (current EL), IL = 32 bits + SET = 0, FnV = 0 + EA = 0, S1PTW = 0 + FSC = 0x05: level 1 translation fault +Data abort info: + ISV = 0, ISS = 0x00000005 + CM = 0, WnR = 0 +user pgtable: 4k pages, 39-bit VAs, pgdp=0000000046057000 +[0000000000000020] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000 +Internal error: Oops: 96000005 [#1] SMP +Modules linked in: +CPU: 0 PID: 32 Comm: kworker/u4:1 Tainted: G S 5.18.0-rc3-next-20220422+ #0 +Hardware name: Bananapi BPI-R64 (DT) +Workqueue: events_unbound deferred_probe_work_func +pstate: 60000005 (nZCv daif -PAN -UAO -TCO -DIT -SSBS BTYPE=--) +pc : mt7531_cpu_port_config+0xcc/0x1b0 +lr : mt7531_cpu_port_config+0xc0/0x1b0 +sp : ffffffc008d5b980 +x29: ffffffc008d5b990 x28: ffffff80060562c8 x27: 00000000f805633b +x26: ffffff80001a8880 x25: 00000000000009c4 x24: 0000000000000016 +x23: ffffff8005eb6470 x22: 0000000000003600 x21: ffffff8006948080 +x20: 0000000000000000 x19: 0000000000000006 x18: 0000000000000000 +x17: 0000000000000001 x16: 0000000000000001 x15: 02963607fcee069e +x14: 0000000000000000 x13: 0000000000000030 x12: 0101010101010101 +x11: ffffffc037302000 x10: 0000000000000870 x9 : ffffffc008d5b800 +x8 : ffffff800028f950 x7 : 0000000000000001 x6 : 00000000662b3000 +x5 : 00000000000002f0 x4 : 0000000000000000 x3 : ffffff800028f080 +x2 : 0000000000000000 x1 : ffffff800028f080 x0 : 0000000000000000 +Call trace: + mt7531_cpu_port_config+0xcc/0x1b0 + mt753x_cpu_port_enable+0x24/0x1f0 + mt7531_setup+0x49c/0x5c0 + mt753x_setup+0x20/0x31c + dsa_register_switch+0x8bc/0x1020 + mt7530_probe+0x118/0x200 + mdio_probe+0x30/0x64 + really_probe.part.0+0x98/0x280 + __driver_probe_device+0x94/0x140 + driver_probe_device+0x40/0x114 + __device_attach_driver+0xb0/0x10c + bus_for_each_drv+0x64/0xa0 + __device_attach+0xa8/0x16c + device_initial_probe+0x10/0x20 + bus_probe_device+0x94/0x9c + deferred_probe_work_func+0x80/0xb4 + process_one_work+0x200/0x3a0 + worker_thread+0x260/0x4c0 + kthread+0xd4/0xe0 + ret_from_fork+0x10/0x20 +Code: 9409e911 937b7e60 8b0002a0 f9405800 (f9401005) +---[ end trace 0000000000000000 ]--- + +Reported-by: Daniel Golle +Tested-by: Daniel Golle +Fixes: cbd1f243bc41 ("net: dsa: mt7530: partially convert to phylink_pcs") +Signed-off-by: Russell King (Oracle) +Reviewed-by: Florian Fainelli +Link: https://lore.kernel.org/r/E1nj6FW-007WZB-5Y@rmk-PC.armlinux.org.uk +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mt7530.c | 18 +++++++++--------- + 1 file changed, 9 insertions(+), 9 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -3031,9 +3031,16 @@ static int + mt753x_setup(struct dsa_switch *ds) + { + struct mt7530_priv *priv = ds->priv; +- int ret = priv->info->sw_setup(ds); +- int i; ++ int i, ret; + ++ /* Initialise the PCS devices */ ++ for (i = 0; i < priv->ds->num_ports; i++) { ++ priv->pcs[i].pcs.ops = priv->info->pcs_ops; ++ priv->pcs[i].priv = priv; ++ priv->pcs[i].port = i; ++ } ++ ++ ret = priv->info->sw_setup(ds); + if (ret) + return ret; + +@@ -3045,13 +3052,6 @@ mt753x_setup(struct dsa_switch *ds) + if (ret && priv->irq) + mt7530_free_irq_common(priv); + +- /* Initialise the PCS devices */ +- for (i = 0; i < priv->ds->num_ports; i++) { +- priv->pcs[i].pcs.ops = priv->info->pcs_ops; +- priv->pcs[i].priv = priv; +- priv->pcs[i].port = i; +- } +- + return ret; + } + diff --git a/target/linux/generic/backport-5.15/705-11-v6.0-net-dsa-mt7530-rework-mt7530_hw_vlan_-add-del.patch b/target/linux/generic/backport-5.15/705-11-v6.0-net-dsa-mt7530-rework-mt7530_hw_vlan_-add-del.patch new file mode 100644 index 0000000000..77b4fa1102 --- /dev/null +++ b/target/linux/generic/backport-5.15/705-11-v6.0-net-dsa-mt7530-rework-mt7530_hw_vlan_-add-del.patch @@ -0,0 +1,87 @@ +From e26be16262e1fc1e9f1798c12762663bd9c265c6 Mon Sep 17 00:00:00 2001 +From: Frank Wunderlich +Date: Fri, 10 Jun 2022 19:05:37 +0200 +Subject: [PATCH 11/13] net: dsa: mt7530: rework mt7530_hw_vlan_{add,del} + +Rework vlan_add/vlan_del functions in preparation for dynamic cpu port. + +Currently BIT(MT7530_CPU_PORT) is added to new_members, even though +mt7530_port_vlan_add() will be called on the CPU port too. + +Let DSA core decide when to call port_vlan_add for the CPU port, rather +than doing it implicitly. + +We can do autonomous forwarding in a certain VLAN, but not add br0 to that +VLAN and avoid flooding the CPU with those packets, if software knows it +doesn't need to process them. + +Suggested-by: Vladimir Oltean +Signed-off-by: Frank Wunderlich +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mt7530.c | 30 ++++++++++++------------------ + 1 file changed, 12 insertions(+), 18 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1522,11 +1522,11 @@ static void + mt7530_hw_vlan_add(struct mt7530_priv *priv, + struct mt7530_hw_vlan_entry *entry) + { ++ struct dsa_port *dp = dsa_to_port(priv->ds, entry->port); + u8 new_members; + u32 val; + +- new_members = entry->old_members | BIT(entry->port) | +- BIT(MT7530_CPU_PORT); ++ new_members = entry->old_members | BIT(entry->port); + + /* Validate the entry with independent learning, create egress tag per + * VLAN and joining the port as one of the port members. +@@ -1537,22 +1537,20 @@ mt7530_hw_vlan_add(struct mt7530_priv *p + + /* Decide whether adding tag or not for those outgoing packets from the + * port inside the VLAN. +- */ +- val = entry->untagged ? MT7530_VLAN_EGRESS_UNTAG : +- MT7530_VLAN_EGRESS_TAG; +- mt7530_rmw(priv, MT7530_VAWD2, +- ETAG_CTRL_P_MASK(entry->port), +- ETAG_CTRL_P(entry->port, val)); +- +- /* CPU port is always taken as a tagged port for serving more than one ++ * CPU port is always taken as a tagged port for serving more than one + * VLANs across and also being applied with egress type stack mode for + * that VLAN tags would be appended after hardware special tag used as + * DSA tag. + */ ++ if (dsa_port_is_cpu(dp)) ++ val = MT7530_VLAN_EGRESS_STACK; ++ else if (entry->untagged) ++ val = MT7530_VLAN_EGRESS_UNTAG; ++ else ++ val = MT7530_VLAN_EGRESS_TAG; + mt7530_rmw(priv, MT7530_VAWD2, +- ETAG_CTRL_P_MASK(MT7530_CPU_PORT), +- ETAG_CTRL_P(MT7530_CPU_PORT, +- MT7530_VLAN_EGRESS_STACK)); ++ ETAG_CTRL_P_MASK(entry->port), ++ ETAG_CTRL_P(entry->port, val)); + } + + static void +@@ -1571,11 +1569,7 @@ mt7530_hw_vlan_del(struct mt7530_priv *p + return; + } + +- /* If certain member apart from CPU port is still alive in the VLAN, +- * the entry would be kept valid. Otherwise, the entry is got to be +- * disabled. +- */ +- if (new_members && new_members != BIT(MT7530_CPU_PORT)) { ++ if (new_members) { + val = IVL_MAC | VTAG_EN | PORT_MEM(new_members) | + VLAN_VALID; + mt7530_write(priv, MT7530_VAWD1, val); diff --git a/target/linux/generic/backport-5.15/705-12-v6.0-net-dsa-mt7530-rework-mt753-01-_setup.patch b/target/linux/generic/backport-5.15/705-12-v6.0-net-dsa-mt7530-rework-mt753-01-_setup.patch new file mode 100644 index 0000000000..2324336ed8 --- /dev/null +++ b/target/linux/generic/backport-5.15/705-12-v6.0-net-dsa-mt7530-rework-mt753-01-_setup.patch @@ -0,0 +1,75 @@ +From 1f0dfd443eea7fc3e818e96f7c8264913ba41859 Mon Sep 17 00:00:00 2001 +From: Frank Wunderlich +Date: Fri, 10 Jun 2022 19:05:38 +0200 +Subject: [PATCH 12/13] net: dsa: mt7530: rework mt753[01]_setup + +Enumerate available cpu-ports instead of using hardcoded constant. + +Suggested-by: Vladimir Oltean +Signed-off-by: Frank Wunderlich +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mt7530.c | 25 +++++++++++++++++++++---- + 1 file changed, 21 insertions(+), 4 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -2087,11 +2087,12 @@ static int + mt7530_setup(struct dsa_switch *ds) + { + struct mt7530_priv *priv = ds->priv; ++ struct device_node *dn = NULL; + struct device_node *phy_node; + struct device_node *mac_np; + struct mt7530_dummy_poll p; + phy_interface_t interface; +- struct device_node *dn; ++ struct dsa_port *cpu_dp; + u32 id, val; + int ret, i; + +@@ -2099,7 +2100,19 @@ mt7530_setup(struct dsa_switch *ds) + * controller also is the container for two GMACs nodes representing + * as two netdev instances. + */ +- dn = dsa_to_port(ds, MT7530_CPU_PORT)->master->dev.of_node->parent; ++ dsa_switch_for_each_cpu_port(cpu_dp, ds) { ++ dn = cpu_dp->master->dev.of_node->parent; ++ /* It doesn't matter which CPU port is found first, ++ * their masters should share the same parent OF node ++ */ ++ break; ++ } ++ ++ if (!dn) { ++ dev_err(ds->dev, "parent OF node of DSA master not found"); ++ return -EINVAL; ++ } ++ + ds->assisted_learning_on_cpu_port = true; + ds->mtu_enforcement_ingress = true; + +@@ -2261,6 +2274,7 @@ mt7531_setup(struct dsa_switch *ds) + { + struct mt7530_priv *priv = ds->priv; + struct mt7530_dummy_poll p; ++ struct dsa_port *cpu_dp; + u32 val, id; + int ret, i; + +@@ -2333,8 +2347,11 @@ mt7531_setup(struct dsa_switch *ds) + CORE_PLL_GROUP4, val); + + /* BPDU to CPU port */ +- mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK, +- BIT(MT7530_CPU_PORT)); ++ dsa_switch_for_each_cpu_port(cpu_dp, ds) { ++ mt7530_rmw(priv, MT7531_CFC, MT7531_CPU_PMAP_MASK, ++ BIT(cpu_dp->index)); ++ break; ++ } + mt7530_rmw(priv, MT753X_BPC, MT753X_BPDU_PORT_FW_MASK, + MT753X_BPDU_CPU_ONLY); + diff --git a/target/linux/generic/backport-5.15/705-13-v6.0-net-dsa-mt7530-get-cpu-port-via-dp-cpu_dp-instead-of.patch b/target/linux/generic/backport-5.15/705-13-v6.0-net-dsa-mt7530-get-cpu-port-via-dp-cpu_dp-instead-of.patch new file mode 100644 index 0000000000..3b5ce7363f --- /dev/null +++ b/target/linux/generic/backport-5.15/705-13-v6.0-net-dsa-mt7530-get-cpu-port-via-dp-cpu_dp-instead-of.patch @@ -0,0 +1,117 @@ +From ad2606f6fafae3a7d41c4f2af5554c8f6adecbc7 Mon Sep 17 00:00:00 2001 +From: Frank Wunderlich +Date: Fri, 10 Jun 2022 19:05:39 +0200 +Subject: [PATCH 13/13] net: dsa: mt7530: get cpu-port via dp->cpu_dp instead + of constant + +Replace last occurences of hardcoded cpu-port by cpu_dp member of +dsa_port struct. + +Now the constant can be dropped. + +Suggested-by: Vladimir Oltean +Signed-off-by: Frank Wunderlich +Reviewed-by: Vladimir Oltean +Reviewed-by: Florian Fainelli +Signed-off-by: Jakub Kicinski +--- + drivers/net/dsa/mt7530.c | 27 ++++++++++++++++++++------- + drivers/net/dsa/mt7530.h | 1 - + 2 files changed, 20 insertions(+), 8 deletions(-) + +--- a/drivers/net/dsa/mt7530.c ++++ b/drivers/net/dsa/mt7530.c +@@ -1038,6 +1038,7 @@ static int + mt7530_port_enable(struct dsa_switch *ds, int port, + struct phy_device *phy) + { ++ struct dsa_port *dp = dsa_to_port(ds, port); + struct mt7530_priv *priv = ds->priv; + + mutex_lock(&priv->reg_mutex); +@@ -1046,7 +1047,11 @@ mt7530_port_enable(struct dsa_switch *ds + * restore the port matrix if the port is the member of a certain + * bridge. + */ +- priv->ports[port].pm |= PCR_MATRIX(BIT(MT7530_CPU_PORT)); ++ if (dsa_port_is_user(dp)) { ++ struct dsa_port *cpu_dp = dp->cpu_dp; ++ ++ priv->ports[port].pm |= PCR_MATRIX(BIT(cpu_dp->index)); ++ } + priv->ports[port].enable = true; + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, + priv->ports[port].pm); +@@ -1194,7 +1199,8 @@ mt7530_port_bridge_join(struct dsa_switc + struct net_device *bridge) + { + struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; +- u32 port_bitmap = BIT(MT7530_CPU_PORT); ++ struct dsa_port *cpu_dp = dp->cpu_dp; ++ u32 port_bitmap = BIT(cpu_dp->index); + struct mt7530_priv *priv = ds->priv; + + mutex_lock(&priv->reg_mutex); +@@ -1271,9 +1277,12 @@ mt7530_port_set_vlan_unaware(struct dsa_ + * the CPU port get out of VLAN filtering mode. + */ + if (all_user_ports_removed) { +- mt7530_write(priv, MT7530_PCR_P(MT7530_CPU_PORT), ++ struct dsa_port *dp = dsa_to_port(ds, port); ++ struct dsa_port *cpu_dp = dp->cpu_dp; ++ ++ mt7530_write(priv, MT7530_PCR_P(cpu_dp->index), + PCR_MATRIX(dsa_user_ports(priv->ds))); +- mt7530_write(priv, MT7530_PVC_P(MT7530_CPU_PORT), PORT_SPEC_TAG ++ mt7530_write(priv, MT7530_PVC_P(cpu_dp->index), PORT_SPEC_TAG + | PVC_EG_TAG(MT7530_VLAN_EG_CONSISTENT)); + } + } +@@ -1311,6 +1320,7 @@ mt7530_port_bridge_leave(struct dsa_swit + struct net_device *bridge) + { + struct dsa_port *dp = dsa_to_port(ds, port), *other_dp; ++ struct dsa_port *cpu_dp = dp->cpu_dp; + struct mt7530_priv *priv = ds->priv; + + mutex_lock(&priv->reg_mutex); +@@ -1339,8 +1349,8 @@ mt7530_port_bridge_leave(struct dsa_swit + */ + if (priv->ports[port].enable) + mt7530_rmw(priv, MT7530_PCR_P(port), PCR_MATRIX_MASK, +- PCR_MATRIX(BIT(MT7530_CPU_PORT))); +- priv->ports[port].pm = PCR_MATRIX(BIT(MT7530_CPU_PORT)); ++ PCR_MATRIX(BIT(cpu_dp->index))); ++ priv->ports[port].pm = PCR_MATRIX(BIT(cpu_dp->index)); + + /* When a port is removed from the bridge, the port would be set up + * back to the default as is at initial boot which is a VLAN-unaware +@@ -1503,6 +1513,9 @@ static int + mt7530_port_vlan_filtering(struct dsa_switch *ds, int port, bool vlan_filtering, + struct netlink_ext_ack *extack) + { ++ struct dsa_port *dp = dsa_to_port(ds, port); ++ struct dsa_port *cpu_dp = dp->cpu_dp; ++ + if (vlan_filtering) { + /* The port is being kept as VLAN-unaware port when bridge is + * set up with vlan_filtering not being set, Otherwise, the +@@ -1510,7 +1523,7 @@ mt7530_port_vlan_filtering(struct dsa_sw + * for becoming a VLAN-aware port. + */ + mt7530_port_set_vlan_aware(ds, port); +- mt7530_port_set_vlan_aware(ds, MT7530_CPU_PORT); ++ mt7530_port_set_vlan_aware(ds, cpu_dp->index); + } else { + mt7530_port_set_vlan_unaware(ds, port); + } +--- a/drivers/net/dsa/mt7530.h ++++ b/drivers/net/dsa/mt7530.h +@@ -8,7 +8,6 @@ + + #define MT7530_NUM_PORTS 7 + #define MT7530_NUM_PHYS 5 +-#define MT7530_CPU_PORT 6 + #define MT7530_NUM_FDB_RECORDS 2048 + #define MT7530_ALL_MEMBERS 0xff + diff --git a/target/linux/generic/backport-5.15/765-1-net-next-net-dsa-reorder-PHY-initialization-with-MTU-setup-in.patch b/target/linux/generic/backport-5.15/765-1-net-next-net-dsa-reorder-PHY-initialization-with-MTU-setup-in.patch index 1786bf0345..77cf63b809 100644 --- a/target/linux/generic/backport-5.15/765-1-net-next-net-dsa-reorder-PHY-initialization-with-MTU-setup-in.patch +++ b/target/linux/generic/backport-5.15/765-1-net-next-net-dsa-reorder-PHY-initialization-with-MTU-setup-in.patch @@ -22,7 +22,7 @@ Signed-off-by: David S. Miller --- a/net/dsa/slave.c +++ b/net/dsa/slave.c -@@ -1986,13 +1986,6 @@ int dsa_slave_create(struct dsa_port *po +@@ -1977,13 +1977,6 @@ int dsa_slave_create(struct dsa_port *po port->slave = slave_dev; dsa_slave_setup_tagger(slave_dev); @@ -36,7 +36,7 @@ Signed-off-by: David S. Miller netif_carrier_off(slave_dev); ret = dsa_slave_phy_setup(slave_dev); -@@ -2004,6 +1997,13 @@ int dsa_slave_create(struct dsa_port *po +@@ -1995,6 +1988,13 @@ int dsa_slave_create(struct dsa_port *po } rtnl_lock(); diff --git a/target/linux/generic/backport-5.15/765-2-net-next-net-dsa-merge-rtnl_lock-sections-in-dsa_slave_create.patch b/target/linux/generic/backport-5.15/765-2-net-next-net-dsa-merge-rtnl_lock-sections-in-dsa_slave_create.patch index c2493a08fd..50aa5d8f0d 100644 --- a/target/linux/generic/backport-5.15/765-2-net-next-net-dsa-merge-rtnl_lock-sections-in-dsa_slave_create.patch +++ b/target/linux/generic/backport-5.15/765-2-net-next-net-dsa-merge-rtnl_lock-sections-in-dsa_slave_create.patch @@ -16,7 +16,7 @@ Signed-off-by: David S. Miller --- a/net/dsa/slave.c +++ b/net/dsa/slave.c -@@ -1997,14 +1997,12 @@ int dsa_slave_create(struct dsa_port *po +@@ -1988,14 +1988,12 @@ int dsa_slave_create(struct dsa_port *po } rtnl_lock(); diff --git a/target/linux/generic/backport-5.15/766-01-net-dsa-provide-switch-operations-for-tracking-the-m.patch b/target/linux/generic/backport-5.15/766-01-net-dsa-provide-switch-operations-for-tracking-the-m.patch index d73b745586..7c6a3a3f8d 100644 --- a/target/linux/generic/backport-5.15/766-01-net-dsa-provide-switch-operations-for-tracking-the-m.patch +++ b/target/linux/generic/backport-5.15/766-01-net-dsa-provide-switch-operations-for-tracking-the-m.patch @@ -68,7 +68,7 @@ Signed-off-by: David S. Miller static inline bool dsa_is_unused_port(struct dsa_switch *ds, int p) { return dsa_to_port(ds, p)->type == DSA_PORT_TYPE_UNUSED; -@@ -916,6 +926,13 @@ struct dsa_switch_ops { +@@ -949,6 +959,13 @@ struct dsa_switch_ops { int (*tag_8021q_vlan_add)(struct dsa_switch *ds, int port, u16 vid, u16 flags); int (*tag_8021q_vlan_del)(struct dsa_switch *ds, int port, u16 vid); @@ -175,7 +175,7 @@ Signed-off-by: David S. Miller --- a/net/dsa/slave.c +++ b/net/dsa/slave.c -@@ -2320,6 +2320,36 @@ static int dsa_slave_netdevice_event(str +@@ -2311,6 +2311,36 @@ static int dsa_slave_netdevice_event(str err = dsa_port_lag_change(dp, info->lower_state_info); return notifier_from_errno(err); } @@ -212,7 +212,7 @@ Signed-off-by: David S. Miller case NETDEV_GOING_DOWN: { struct dsa_port *dp, *cpu_dp; struct dsa_switch_tree *dst; -@@ -2331,6 +2361,8 @@ static int dsa_slave_netdevice_event(str +@@ -2322,6 +2352,8 @@ static int dsa_slave_netdevice_event(str cpu_dp = dev->dsa_ptr; dst = cpu_dp->ds->dst; diff --git a/target/linux/generic/pending-5.15/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch b/target/linux/generic/pending-5.15/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch index 4b5c474204..e3e338bd4f 100644 --- a/target/linux/generic/pending-5.15/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch +++ b/target/linux/generic/pending-5.15/702-net-ethernet-mtk_eth_soc-enable-threaded-NAPI.patch @@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -2443,8 +2443,8 @@ static irqreturn_t mtk_handle_irq_rx(int +@@ -2381,8 +2381,8 @@ static irqreturn_t mtk_handle_irq_rx(int eth->rx_events++; if (likely(napi_schedule_prep(ð->rx_napi))) { @@ -20,7 +20,7 @@ Signed-off-by: Felix Fietkau } return IRQ_HANDLED; -@@ -2456,8 +2456,8 @@ static irqreturn_t mtk_handle_irq_tx(int +@@ -2394,8 +2394,8 @@ static irqreturn_t mtk_handle_irq_tx(int eth->tx_events++; if (likely(napi_schedule_prep(ð->tx_napi))) { @@ -30,12 +30,12 @@ Signed-off-by: Felix Fietkau } return IRQ_HANDLED; -@@ -3623,6 +3623,8 @@ static int mtk_probe(struct platform_dev +@@ -3585,6 +3585,8 @@ static int mtk_probe(struct platform_dev * for NAPI to work */ init_dummy_netdev(ð->dummy_dev); + eth->dummy_dev.threaded = 1; + strcpy(eth->dummy_dev.name, "mtk_eth"); netif_napi_add(ð->dummy_dev, ð->tx_napi, mtk_napi_tx, - MTK_NAPI_WEIGHT); + NAPI_POLL_WEIGHT); netif_napi_add(ð->dummy_dev, ð->rx_napi, mtk_napi_rx, diff --git a/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch b/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch index 24b64c6ce6..d6e7f40f3b 100644 --- a/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch +++ b/target/linux/generic/pending-5.15/703-phy-add-detach-callback-to-struct-phy_driver.patch @@ -23,7 +23,7 @@ Signed-off-by: Gabor Juhos sysfs_remove_link(&dev->dev.kobj, "phydev"); --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -789,6 +789,12 @@ struct phy_driver { +@@ -823,6 +823,12 @@ struct phy_driver { /** @handle_interrupt: Override default interrupt handling */ irqreturn_t (*handle_interrupt)(struct phy_device *phydev); diff --git a/target/linux/mediatek/patches-5.15/510-net-mediatek-add-flow-offload-for-mt7623.patch b/target/linux/mediatek/patches-5.15/510-net-mediatek-add-flow-offload-for-mt7623.patch index deb25e652d..4c0d1001e0 100644 --- a/target/linux/mediatek/patches-5.15/510-net-mediatek-add-flow-offload-for-mt7623.patch +++ b/target/linux/mediatek/patches-5.15/510-net-mediatek-add-flow-offload-for-mt7623.patch @@ -14,7 +14,7 @@ Signed-off-by: Frank Wunderlich --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -3675,6 +3675,7 @@ static const struct mtk_soc_data mt2701_ +@@ -3637,6 +3637,7 @@ static const struct mtk_soc_data mt2701_ .hw_features = MTK_HW_FEATURES, .required_clks = MT7623_CLKS_BITMAP, .required_pctl = true, diff --git a/target/linux/mediatek/patches-5.15/703-v5.17-net-ethernet-mtk_eth_soc-implement-Clause-45-MDIO-ac.patch b/target/linux/mediatek/patches-5.15/703-v5.17-net-ethernet-mtk_eth_soc-implement-Clause-45-MDIO-ac.patch index 45c650b34a..de1079ffae 100644 --- a/target/linux/mediatek/patches-5.15/703-v5.17-net-ethernet-mtk_eth_soc-implement-Clause-45-MDIO-ac.patch +++ b/target/linux/mediatek/patches-5.15/703-v5.17-net-ethernet-mtk_eth_soc-implement-Clause-45-MDIO-ac.patch @@ -103,7 +103,7 @@ Signed-off-by: David S. Miller ret = mtk_mdio_busy_wait(eth); if (ret < 0) -@@ -683,6 +726,7 @@ static int mtk_mdio_init(struct mtk_eth +@@ -621,6 +664,7 @@ static int mtk_mdio_init(struct mtk_eth eth->mii_bus->name = "mdio"; eth->mii_bus->read = mtk_mdio_read; eth->mii_bus->write = mtk_mdio_write; diff --git a/target/linux/mediatek/patches-5.15/704-net-ethernet-mtk_eth_soc-announce-2500baseT.patch b/target/linux/mediatek/patches-5.15/704-net-ethernet-mtk_eth_soc-announce-2500baseT.patch deleted file mode 100644 index a7878ecb1b..0000000000 --- a/target/linux/mediatek/patches-5.15/704-net-ethernet-mtk_eth_soc-announce-2500baseT.patch +++ /dev/null @@ -1,10 +0,0 @@ ---- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c -+++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -667,6 +667,7 @@ static void mtk_validate(struct phylink_ - if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_SGMII)) { - phylink_set(mask, 1000baseT_Full); - phylink_set(mask, 1000baseX_Full); -+ phylink_set(mask, 2500baseT_Full); - phylink_set(mask, 2500baseX_Full); - } - if (MTK_HAS_CAPS(mac->hw->soc->caps, MTK_RGMII)) { diff --git a/target/linux/ramips/patches-5.15/700-net-ethernet-mediatek-support-net-labels.patch b/target/linux/ramips/patches-5.15/700-net-ethernet-mediatek-support-net-labels.patch index f6ac8360ee..8a39c81e01 100644 --- a/target/linux/ramips/patches-5.15/700-net-ethernet-mediatek-support-net-labels.patch +++ b/target/linux/ramips/patches-5.15/700-net-ethernet-mediatek-support-net-labels.patch @@ -14,7 +14,7 @@ Signed-off-by: René van Dorst --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c -@@ -3290,6 +3290,7 @@ static const struct net_device_ops mtk_n +@@ -3228,6 +3228,7 @@ static const struct net_device_ops mtk_n static int mtk_add_mac(struct mtk_eth *eth, struct device_node *np) { @@ -22,7 +22,7 @@ Signed-off-by: René van Dorst const __be32 *_id = of_get_property(np, "reg", NULL); phy_interface_t phy_mode; struct phylink *phylink; -@@ -3385,6 +3386,9 @@ static int mtk_add_mac(struct mtk_eth *e +@@ -3347,6 +3348,9 @@ static int mtk_add_mac(struct mtk_eth *e else eth->netdev[id]->max_mtu = MTK_MAX_RX_LENGTH_2K - MTK_RX_ETH_HLEN; diff --git a/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch b/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch index afdfc892d5..063b317fd5 100644 --- a/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch +++ b/target/linux/ramips/patches-5.15/720-Revert-net-phy-simplify-phy_link_change-arguments.patch @@ -95,7 +95,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c phydev->mii_ts->link_state(phydev->mii_ts, phydev); --- a/drivers/net/phy/phylink.c +++ b/drivers/net/phy/phylink.c -@@ -946,7 +946,8 @@ void phylink_destroy(struct phylink *pl) +@@ -1315,7 +1315,8 @@ void phylink_destroy(struct phylink *pl) } EXPORT_SYMBOL_GPL(phylink_destroy); @@ -107,7 +107,7 @@ still required by target/linux/ramips/files/drivers/net/ethernet/ralink/mdio.c bool tx_pause, rx_pause; --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -669,7 +669,7 @@ struct phy_device { +@@ -703,7 +703,7 @@ struct phy_device { u8 mdix; u8 mdix_ctrl; diff --git a/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch b/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch index 97086fa950..365bdc6880 100644 --- a/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch +++ b/target/linux/ramips/patches-5.15/721-NET-no-auto-carrier-off-support.patch @@ -37,7 +37,7 @@ Signed-off-by: John Crispin break; --- a/include/linux/phy.h +++ b/include/linux/phy.h -@@ -586,6 +586,7 @@ struct phy_device { +@@ -620,6 +620,7 @@ struct phy_device { unsigned downshifted_rate:1; unsigned is_on_sfp_module:1; unsigned mac_managed_pm:1;