From: Christian Lamparter Date: Wed, 15 Mar 2017 10:48:56 +0000 (+0100) Subject: firmware: add IPQ fritz-tools FW extraction tool X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=aa47f5623a83be15949a080e77959f0f7db16041;p=openwrt%2Fstaging%2Frobimarko.git firmware: add IPQ fritz-tools FW extraction tool Adds tools to access tffs3 and pre-calibration data required for ipq4019 based FritBoxes. Signed-off-by: Christian Lamparter --- diff --git a/package/firmware/fritz-tools/Makefile b/package/firmware/fritz-tools/Makefile new file mode 100644 index 0000000000..4891dcaca3 --- /dev/null +++ b/package/firmware/fritz-tools/Makefile @@ -0,0 +1,30 @@ +include $(TOPDIR)/rules.mk + +PKG_NAME:=fritz-tools +PKG_RELEASE:=1 +CMAKE_INSTALL:=1 +PKG_FLAGS:=nonshared + +include $(INCLUDE_DIR)/package.mk +include $(INCLUDE_DIR)/cmake.mk + +define Package/fritz-tools + SECTION:=firmware + CATEGORY:=Firmware + DEPENDS:=@TARGET_ipq806x +zlib + TITLE:=Utilites for accessing AVM Calibration data and TFFS +endef + +define Package/fritz-tools/description + This package contains: + fritz_cal_extract.c: tool to extract WLAN calibration data. + fritz_tffs_read.c: partially read the TFFS filesystems. +endef + +define Package/fritz-tools/install + $(INSTALL_DIR) $(1)/usr/bin + $(INSTALL_BIN) $(PKG_BUILD_DIR)/fritz_cal_extract $(1)/usr/bin/ + $(INSTALL_BIN) $(PKG_BUILD_DIR)/fritz_tffs_read $(1)/usr/bin/ +endef + +$(eval $(call BuildPackage,fritz-tools)) diff --git a/package/firmware/fritz-tools/README.md b/package/firmware/fritz-tools/README.md new file mode 100644 index 0000000000..def237b174 --- /dev/null +++ b/package/firmware/fritz-tools/README.md @@ -0,0 +1,50 @@ +Userspace utilties for accessing TFFS (a name-value storage usually found in AVM Fritz!Box based devices) + +## Building + +``` +mkdir build +cd build +cmake /path/to/fritz_tffs_tools +make +``` + +## Usage + +All command line parameters are documented: +``` +fritz_tffs_read -h +``` + +Show all entries from a TFFS partition dump (in the format: name=value): +``` +fritz_tffs_read -i /path/to/tffs.dump -a +``` + +Read a TFFS partition and show all entries (in the format: name=value): +``` +fritz_tffs_read -i /dev/mtdX -a +``` + +Output only the value of a specific key (this will only show the value): +``` +fritz_tffs_read -i /dev/mtdX -n my_ipaddress +``` + +## LICENSE + +See `LICENSE`: + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License along + with this program; if not, write to the Free Software Foundation, Inc., + 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. diff --git a/package/firmware/fritz-tools/src/CMakeLists.txt b/package/firmware/fritz-tools/src/CMakeLists.txt new file mode 100644 index 0000000000..116bca9dc0 --- /dev/null +++ b/package/firmware/fritz-tools/src/CMakeLists.txt @@ -0,0 +1,12 @@ +cmake_minimum_required(VERSION 2.6) + +PROJECT(fritz-tools C) +ADD_DEFINITIONS(-Wall -Werror --std=gnu99 -Wmissing-declarations) + +SET(CMAKE_SHARED_LIBRARY_LINK_C_FLAGS "") + +ADD_EXECUTABLE(fritz_tffs_read fritz_tffs_read.c) +ADD_EXECUTABLE(fritz_cal_extract fritz_cal_extract.c) +TARGET_LINK_LIBRARIES(fritz_cal_extract z) + +INSTALL(TARGETS fritz_tffs_read fritz_cal_extract RUNTIME DESTINATION bin) diff --git a/package/firmware/fritz-tools/src/fritz_cal_extract.c b/package/firmware/fritz-tools/src/fritz_cal_extract.c new file mode 100644 index 0000000000..8156dfd1a7 --- /dev/null +++ b/package/firmware/fritz-tools/src/fritz_cal_extract.c @@ -0,0 +1,259 @@ +/* + * A tool for reading the zlib compressed calibration data + * found in AVM Fritz!Box based devices). + * + * Copyright (c) 2017 Christian Lamparter + * + * Based on zpipe, which is an example of proper use of zlib's inflate(). + * that is Not copyrighted -- provided to the public domain + * Version 1.4 11 December 2005 Mark Adler + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include "zlib.h" + +#define CHUNK 1024 + +static inline size_t special_min(size_t a, size_t b) +{ + return a == 0 ? b : (a < b ? a : b); +} + +/* Decompress from file source to file dest until stream ends or EOF. + inf() returns Z_OK on success, Z_MEM_ERROR if memory could not be + allocated for processing, Z_DATA_ERROR if the deflate data is + invalid or incomplete, Z_VERSION_ERROR if the version of zlib.h and + the version of the library linked do not match, or Z_ERRNO if there + is an error reading or writing the files. */ +static int inf(FILE *source, FILE *dest, size_t limit, size_t skip) +{ + int ret; + size_t have; + z_stream strm; + unsigned char in[CHUNK]; + unsigned char out[CHUNK]; + + /* allocate inflate state */ + strm.zalloc = Z_NULL; + strm.zfree = Z_NULL; + strm.opaque = Z_NULL; + strm.avail_in = 0; + strm.next_in = Z_NULL; + ret = inflateInit(&strm); + if (ret != Z_OK) + return ret; + + /* decompress until deflate stream ends or end of file */ + do { + strm.avail_in = fread(in, 1, CHUNK, source); + if (ferror(source)) { + (void)inflateEnd(&strm); + return Z_ERRNO; + } + if (strm.avail_in == 0) + break; + strm.next_in = in; + + /* run inflate() on input until output buffer not full */ + do { + strm.avail_out = CHUNK; + strm.next_out = out; + ret = inflate(&strm, Z_NO_FLUSH); + assert(ret != Z_STREAM_ERROR); /* state not clobbered */ + switch (ret) { + case Z_NEED_DICT: + ret = Z_DATA_ERROR; /* and fall through */ + case Z_DATA_ERROR: + case Z_MEM_ERROR: + (void)inflateEnd(&strm); + return ret; + } + have = special_min(limit, CHUNK - strm.avail_out) - skip; + if (fwrite(&out[skip], have, 1, dest) != 1 || ferror(dest)) { + (void)inflateEnd(&strm); + return Z_ERRNO; + } + skip = 0; + limit -= have; + } while (strm.avail_out == 0 && limit > 0); + + /* done when inflate() says it's done */ + } while (ret != Z_STREAM_END && limit > 0); + + /* clean up and return */ + (void)inflateEnd(&strm); + return (limit == 0 ? Z_OK : (ret == Z_STREAM_END ? Z_OK : Z_DATA_ERROR)); +} + +/* report a zlib or i/o error */ +static void zerr(int ret) +{ + switch (ret) { + case Z_ERRNO: + if (ferror(stdin)) + fputs("error reading stdin\n", stderr); + if (ferror(stdout)) + fputs("error writing stdout\n", stderr); + break; + case Z_STREAM_ERROR: + fputs("invalid compression level\n", stderr); + break; + case Z_DATA_ERROR: + fputs("invalid or incomplete deflate data\n", stderr); + break; + case Z_MEM_ERROR: + fputs("out of memory\n", stderr); + break; + case Z_VERSION_ERROR: + fputs("zlib version mismatch!\n", stderr); + } +} + +static unsigned int get_num(char *str) +{ + if (!strncmp("0x", str, 2)) + return strtoul(str+2, NULL, 16); + else + return strtoul(str, NULL, 10); +} + +static void usage(void) +{ + fprintf(stderr, "Usage: fritz_cal_extract [-s seek offset] [-i skip] [-o output file] [-l limit] [infile] -e entry_id\n" + "Finds and extracts zlib compressed calibration data in the EVA loader\n"); + exit(EXIT_FAILURE); +} + +struct cal_entry { + uint16_t id; + uint16_t len; +} __attribute__((packed)); + +/* compress or decompress from stdin to stdout */ +int main(int argc, char **argv) +{ + struct cal_entry cal = { .len = 0 }; + FILE *in = stdin; + FILE *out = stdout; + size_t limit = 0, skip = 0; + int initial_offset = 0; + int entry = -1; + int ret; + int opt; + + while ((opt = getopt(argc, argv, "s:e:o:l:i:")) != -1) { + switch (opt) { + case 's': + initial_offset = (int)get_num(optarg); + if (errno) { + perror("Failed to parse seek offset"); + goto out_bad; + } + break; + case 'e': + entry = (int) htobe16(get_num(optarg)); + if (errno) { + perror("Failed to entry id"); + goto out_bad; + } + break; + case 'o': + out = fopen(optarg, "w"); + if (!out) { + perror("Failed to create output file"); + goto out_bad; + } + break; + case 'l': + limit = (size_t)get_num(optarg); + if (errno) { + perror("Failed to parse limit"); + goto out_bad; + } + break; + case 'i': + skip = (size_t)get_num(optarg); + if (errno) { + perror("Failed to parse skip"); + goto out_bad; + } + break; + default: /* '?' */ + usage(); + } + } + + if (entry == -1) + usage(); + + if (argc > 1 && optind <= argc) { + in = fopen(argv[optind], "r"); + if (!in) { + perror("Failed to create output file"); + goto out_bad; + } + } + + if (initial_offset) { + ret = fseek(in, initial_offset, SEEK_CUR); + if (ret) { + perror("Failed to seek to calibration table"); + goto out_bad; + } + } + + do { + ret = fseek(in, be16toh(cal.len), SEEK_CUR); + if (feof(in)) { + fprintf(stderr, "Reached end of file, but didn't find the matching entry\n"); + goto out_bad; + } else if (ferror(in)) { + perror("Failure during seek"); + goto out_bad; + } + + ret = fread(&cal, 1, sizeof cal, in); + if (ret != sizeof cal) + goto out_bad; + } while (entry != cal.id || cal.id == 0xffff); + + if (cal.id == 0xffff) { + fprintf(stderr, "Reached end of filesystem, but didn't find the matching entry\n"); + goto out_bad; + } + + ret = inf(in, out, limit, skip); + if (ret == Z_OK) + goto out; + + zerr(ret); + +out_bad: + ret = EXIT_FAILURE; + +out: + fclose(in); + fclose(out); + return ret; +} diff --git a/package/firmware/fritz-tools/src/fritz_tffs_read.c b/package/firmware/fritz-tools/src/fritz_tffs_read.c new file mode 100644 index 0000000000..f367e02e04 --- /dev/null +++ b/package/firmware/fritz-tools/src/fritz_tffs_read.c @@ -0,0 +1,375 @@ +/* + * A tool for reading the TFFS partitions (a name-value storage usually + * found in AVM Fritz!Box based devices). + * + * Copyright (c) 2015-2016 Martin Blumenstingl + * + * Based on the TFFS 2.0 kernel driver from AVM: + * Copyright (c) 2004-2007 AVM GmbH + * and the OpenWrt TFFS kernel driver: + * Copyright (c) 2013 John Crispin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#define DEFAULT_TFFS_SIZE (256 * 1024) + +#define TFFS_ID_END 0xffff +#define TFFS_ID_TABLE_NAME 0x01ff + +static char *progname; +static char *input_file; +static unsigned long tffs_size = DEFAULT_TFFS_SIZE; +static char *name_filter = NULL; +static bool show_all = false; +static bool print_all_key_names = false; +static bool swap_bytes = false; + +struct tffs_entry_header { + uint16_t id; + uint16_t len; +}; + +struct tffs_entry { + const struct tffs_entry_header *header; + char *name; + uint8_t *val; +}; + +struct tffs_name_table_entry { + const uint32_t *id; + const char *val; +}; + +struct tffs_key_name_table { + uint32_t size; + struct tffs_name_table_entry *entries; +}; + +static inline uint16_t get_header_len(const struct tffs_entry_header *header) +{ + if (swap_bytes) + return ntohs(header->len); + + return header->len; +} + +static inline uint16_t get_header_id(const struct tffs_entry_header *header) +{ + if (swap_bytes) + return ntohs(header->id); + + return header->id; +} + +static inline uint16_t to_entry_header_id(uint32_t name_id) +{ + if (swap_bytes) + return ntohl(name_id) & 0xffff; + + return name_id & 0xffff; +} + +static inline uint32_t get_walk_size(uint32_t entry_len) +{ + return (entry_len + 3) & ~0x03; +} + +static void print_entry_value(const struct tffs_entry *entry) +{ + int i; + + /* These are NOT NULL terminated. */ + for (i = 0; i < get_header_len(entry->header); i++) + fprintf(stdout, "%c", entry->val[i]); +} + +static void parse_entry(uint8_t *buffer, uint32_t pos, + struct tffs_entry *entry) +{ + entry->header = (struct tffs_entry_header *) &buffer[pos]; + entry->val = &buffer[pos + sizeof(struct tffs_entry_header)]; +} + +static int find_entry(uint8_t *buffer, uint16_t id, struct tffs_entry *entry) +{ + uint32_t pos = 0; + + do { + parse_entry(buffer, pos, entry); + + if (get_header_id(entry->header) == id) + return 1; + + pos += sizeof(struct tffs_entry_header); + pos += get_walk_size(get_header_len(entry->header)); + } while (pos < tffs_size && entry->header->id != TFFS_ID_END); + + return 0; +} + +static void parse_key_names(struct tffs_entry *names_entry, + struct tffs_key_name_table *key_names) +{ + uint32_t pos = 0, i = 0; + struct tffs_name_table_entry *name_item; + + key_names->entries = calloc(sizeof(*name_item), 1); + + do { + name_item = &key_names->entries[i]; + + name_item->id = (uint32_t *) &names_entry->val[pos]; + pos += sizeof(*name_item->id); + name_item->val = (const char *) &names_entry->val[pos]; + + /* + * There is no "length" field because the string values are + * simply NULL-terminated -> strlen() gives us the size. + */ + pos += get_walk_size(strlen(name_item->val) + 1); + + ++i; + key_names->entries = realloc(key_names->entries, + sizeof(*name_item) * (i + 1)); + } while (pos < get_header_len(names_entry->header)); + + key_names->size = i; +} + +static void show_all_key_names(struct tffs_key_name_table *key_names) +{ + int i; + + for (i = 0; i < key_names->size; i++) + printf("%s\n", key_names->entries[i].val); +} + +static int show_all_key_value_pairs(uint8_t *buffer, + struct tffs_key_name_table *key_names) +{ + int i, has_value = 0; + uint16_t id; + struct tffs_entry tmp; + + for (i = 0; i < key_names->size; i++) { + id = to_entry_header_id(*key_names->entries[i].id); + + if (find_entry(buffer, id, &tmp)) { + printf("%s=", key_names->entries[i].val); + print_entry_value(&tmp); + printf("\n"); + has_value++; + } + } + + if (!has_value) { + fprintf(stderr, "ERROR: no values found!\n"); + return EXIT_FAILURE; + } + + return EXIT_SUCCESS; +} + +static int show_matching_key_value(uint8_t *buffer, + struct tffs_key_name_table *key_names) +{ + int i; + uint16_t id; + struct tffs_entry tmp; + const char *name; + + for (i = 0; i < key_names->size; i++) { + name = key_names->entries[i].val; + + if (strncmp(name, name_filter, strlen(name)) == 0) { + id = to_entry_header_id(*key_names->entries[i].id); + + if (find_entry(buffer, id, &tmp)) { + print_entry_value(&tmp); + printf("\n"); + return EXIT_SUCCESS; + } else { + fprintf(stderr, + "ERROR: no value found for name %s!\n", + name); + return EXIT_FAILURE; + } + } + } + + fprintf(stderr, "ERROR: Unknown key name %s!\n", name_filter); + return EXIT_FAILURE; +} + +static void usage(int status) +{ + FILE *stream = (status != EXIT_SUCCESS) ? stderr : stdout; + + fprintf(stream, "Usage: %s [OPTIONS...]\n", progname); + fprintf(stream, + "\n" + "Options:\n" + " -a list all key value pairs found in the TFFS file/device\n" + " -b swap bytes while parsing the TFFS file/device\n" + " -h show this screen\n" + " -i inspect the given TFFS file/device \n" + " -l list all supported keys\n" + " -n display the value of the given key\n" + " -s the (max) size of the TFFS file/device \n" + ); + + exit(status); +} + +static int file_exist(char *filename) +{ + struct stat buffer; + + return stat(filename, &buffer) == 0; +} + +static void parse_options(int argc, char *argv[]) +{ + while (1) + { + int c; + + c = getopt(argc, argv, "abhi:ln:s"); + if (c == -1) + break; + + switch (c) { + case 'a': + show_all = true; + name_filter = NULL; + print_all_key_names = false; + break; + case 'b': + swap_bytes = 1; + break; + case 'h': + usage(EXIT_SUCCESS); + break; + case 'i': + input_file = optarg; + break; + case 'l': + print_all_key_names = true; + show_all = false; + name_filter = NULL; + break; + case 'n': + name_filter = optarg; + show_all = false; + print_all_key_names = false; + break; + case 's': + tffs_size = strtoul(optarg, NULL, 0); + break; + default: + usage(EXIT_FAILURE); + break; + } + } + + if (!input_file) { + fprintf(stderr, "ERROR: No input file (-i ) given!\n"); + exit(EXIT_FAILURE); + } + + if (!file_exist(input_file)) { + fprintf(stderr, "ERROR: %s does not exist\n", input_file); + exit(EXIT_FAILURE); + } + + if (!show_all && !name_filter && !print_all_key_names) { + fprintf(stderr, + "ERROR: either -l, -a or -n is required!\n"); + exit(EXIT_FAILURE); + } +} + +int main(int argc, char *argv[]) +{ + int ret = EXIT_FAILURE; + uint8_t *buffer; + FILE *fp; + struct tffs_entry name_table; + struct tffs_key_name_table key_names; + + progname = basename(argv[0]); + + parse_options(argc, argv); + + fp = fopen(input_file, "r"); + + if (!fp) { + fprintf(stderr, "ERROR: Failed to open tffs input file %s\n", + input_file); + goto out; + } + + buffer = malloc(tffs_size); + + if (fread(buffer, 1, tffs_size, fp) != tffs_size) { + fprintf(stderr, "ERROR: Failed read tffs file %s\n", + input_file); + goto out_free; + } + + if (!find_entry(buffer, TFFS_ID_TABLE_NAME, &name_table)) { + fprintf(stderr,"ERROR: No name table found in tffs file %s\n", + input_file); + fprintf(stderr," Is byte-swapping (-b) required?\n"); + goto out_free; + } + + parse_key_names(&name_table, &key_names); + if (key_names.size < 1) { + fprintf(stderr, "ERROR: No name table found in tffs file %s\n", + input_file); + goto out_free_names; + } + + if (print_all_key_names) { + show_all_key_names(&key_names); + ret = EXIT_SUCCESS; + } else if (show_all) { + ret = show_all_key_value_pairs(buffer, &key_names); + } else { + ret = show_matching_key_value(buffer, &key_names); + } + +out_free_names: + free(key_names.entries); +out_free: + fclose(fp); + free(buffer); +out: + return ret; +}