From: Rayagonda Kokatanur Date: Wed, 3 Apr 2019 01:18:27 +0000 (-0700) Subject: i2c: iproc: use wrapper for read/write access X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a9f0a81ef88bc58af4e1af911e0f9306090b6082;p=openwrt%2Fstaging%2Fblogic.git i2c: iproc: use wrapper for read/write access Use the following wrapper for read/write access of iProc i2c registers: u32 iproc_i2c_rd_reg(struct bcm_iproc_i2c_dev *iproc_i2c, u32 offset) void iproc_i2c_wr_reg(struct bcm_iproc_i2c_dev *iproc_i2c, u32 offset, u32 val) This preps the driver for support of indirect register access required by certain SoCs with this iProc I2C block integrated Signed-off-by: Rayagonda Kokatanur Signed-off-by: Ray Jui Signed-off-by: Wolfram Sang --- diff --git a/drivers/i2c/busses/i2c-bcm-iproc.c b/drivers/i2c/busses/i2c-bcm-iproc.c index be8cd14f5ef6..dba1a9d925b2 100644 --- a/drivers/i2c/busses/i2c-bcm-iproc.c +++ b/drivers/i2c/busses/i2c-bcm-iproc.c @@ -212,6 +212,18 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave); static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, bool enable); +static inline u32 iproc_i2c_rd_reg(struct bcm_iproc_i2c_dev *iproc_i2c, + u32 offset) +{ + return readl(iproc_i2c->base + offset); +} + +static inline void iproc_i2c_wr_reg(struct bcm_iproc_i2c_dev *iproc_i2c, + u32 offset, u32 val) +{ + writel(val, iproc_i2c->base + offset); +} + static void bcm_iproc_i2c_slave_init( struct bcm_iproc_i2c_dev *iproc_i2c, bool need_reset) { @@ -219,37 +231,37 @@ static void bcm_iproc_i2c_slave_init( if (need_reset) { /* put controller in reset */ - val = readl(iproc_i2c->base + CFG_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); val |= BIT(CFG_RESET_SHIFT); - writel(val, iproc_i2c->base + CFG_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); /* wait 100 usec per spec */ udelay(100); /* bring controller out of reset */ val &= ~(BIT(CFG_RESET_SHIFT)); - writel(val, iproc_i2c->base + CFG_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); } /* flush TX/RX FIFOs */ val = (BIT(S_FIFO_RX_FLUSH_SHIFT) | BIT(S_FIFO_TX_FLUSH_SHIFT)); - writel(val, iproc_i2c->base + S_FIFO_CTRL_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, S_FIFO_CTRL_OFFSET, val); /* Maximum slave stretch time */ - val = readl(iproc_i2c->base + TIM_CFG_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); val &= ~(TIM_RAND_SLAVE_STRETCH_MASK << TIM_RAND_SLAVE_STRETCH_SHIFT); val |= (SLAVE_CLOCK_STRETCH_TIME << TIM_RAND_SLAVE_STRETCH_SHIFT); - writel(val, iproc_i2c->base + TIM_CFG_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); /* Configure the slave address */ - val = readl(iproc_i2c->base + S_CFG_SMBUS_ADDR_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET); val |= BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT); val &= ~(S_CFG_NIC_SMB_ADDR3_MASK << S_CFG_NIC_SMB_ADDR3_SHIFT); val |= (iproc_i2c->slave->addr << S_CFG_NIC_SMB_ADDR3_SHIFT); - writel(val, iproc_i2c->base + S_CFG_SMBUS_ADDR_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, val); /* clear all pending slave interrupts */ - writel(ISR_MASK_SLAVE, iproc_i2c->base + IS_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, ISR_MASK_SLAVE); /* Enable interrupt register for any READ event */ val = BIT(IE_S_RD_EVENT_SHIFT); @@ -257,7 +269,7 @@ static void bcm_iproc_i2c_slave_init( val |= BIT(IE_S_RX_EVENT_SHIFT); /* Enable interrupt register for the Slave BUSY command */ val |= BIT(IE_S_START_BUSY_SHIFT); - writel(val, iproc_i2c->base + IE_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); iproc_i2c->xfer_dir = I2C_SLAVE_DIR_NONE; } @@ -267,7 +279,7 @@ static void bcm_iproc_i2c_check_slave_status( { u32 val; - val = readl(iproc_i2c->base + S_CMD_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, S_CMD_OFFSET); val = (val >> S_CMD_STATUS_SHIFT) & S_CMD_STATUS_MASK; if (val == S_CMD_STATUS_TIMEOUT) { @@ -290,7 +302,7 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c, /* Start of transaction. check address and populate the direction */ if (iproc_i2c->xfer_dir == I2C_SLAVE_DIR_NONE) { - tmp = readl(iproc_i2c->base + S_RX_OFFSET); + tmp = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); rd_status = (tmp >> S_RX_STATUS_SHIFT) & S_RX_STATUS_MASK; /* This condition checks whether the request is a new request */ if (((rd_status == I2C_SLAVE_RX_START) && @@ -316,16 +328,16 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c, (iproc_i2c->xfer_dir == I2C_SLAVE_DIR_WRITE)) { i2c_slave_event(iproc_i2c->slave, I2C_SLAVE_READ_PROCESSED, &value); - writel(value, iproc_i2c->base + S_TX_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, S_TX_OFFSET, value); val = BIT(S_CMD_START_BUSY_SHIFT); - writel(val, iproc_i2c->base + S_CMD_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, S_CMD_OFFSET, val); } /* write request from master */ if ((status & BIT(IS_S_RX_EVENT_SHIFT)) && (iproc_i2c->xfer_dir == I2C_SLAVE_DIR_READ)) { - val = readl(iproc_i2c->base + S_RX_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, S_RX_OFFSET); /* Its a write request by Master to Slave. * We read data present in receive FIFO */ @@ -348,7 +360,7 @@ static bool bcm_iproc_i2c_slave_isr(struct bcm_iproc_i2c_dev *iproc_i2c, } /* clear interrupt status */ - writel(status, iproc_i2c->base + IS_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); bcm_iproc_i2c_check_slave_status(iproc_i2c); return true; @@ -360,12 +372,12 @@ static void bcm_iproc_i2c_read_valid_bytes(struct bcm_iproc_i2c_dev *iproc_i2c) /* Read valid data from RX FIFO */ while (iproc_i2c->rx_bytes < msg->len) { - if (!((readl(iproc_i2c->base + M_FIFO_CTRL_OFFSET) >> M_FIFO_RX_CNT_SHIFT) + if (!((iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET) >> M_FIFO_RX_CNT_SHIFT) & M_FIFO_RX_CNT_MASK)) break; msg->buf[iproc_i2c->rx_bytes] = - (readl(iproc_i2c->base + M_RX_OFFSET) >> + (iproc_i2c_rd_reg(iproc_i2c, M_RX_OFFSET) >> M_RX_DATA_SHIFT) & M_RX_DATA_MASK; iproc_i2c->rx_bytes++; } @@ -397,14 +409,15 @@ static void bcm_iproc_i2c_send(struct bcm_iproc_i2c_dev *iproc_i2c) * Since this is the last byte, we should now * disable TX FIFO underrun interrupt */ - tmp = readl(iproc_i2c->base + IE_OFFSET); + tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); tmp &= ~BIT(IE_M_TX_UNDERRUN_SHIFT); - writel(tmp, iproc_i2c->base + IE_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, + tmp); } } /* load data into TX FIFO */ - writel(val, iproc_i2c->base + M_TX_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); } /* update number of transferred bytes */ @@ -421,16 +434,16 @@ static void bcm_iproc_i2c_read(struct bcm_iproc_i2c_dev *iproc_i2c) if (bytes_left == 0) { if (iproc_i2c->irq) { /* finished reading all data, disable rx thld event */ - val = readl(iproc_i2c->base + IE_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); val &= ~BIT(IS_M_RX_THLD_SHIFT); - writel(val, iproc_i2c->base + IE_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); } } else if (bytes_left < iproc_i2c->thld_bytes) { /* set bytes left as threshold */ - val = readl(iproc_i2c->base + M_FIFO_CTRL_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET); val &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT); val |= (bytes_left << M_FIFO_RX_THLD_SHIFT); - writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); iproc_i2c->thld_bytes = bytes_left; } /* @@ -462,7 +475,7 @@ static void bcm_iproc_i2c_process_m_event(struct bcm_iproc_i2c_dev *iproc_i2c, static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) { struct bcm_iproc_i2c_dev *iproc_i2c = data; - u32 status = readl(iproc_i2c->base + IS_OFFSET); + u32 status = iproc_i2c_rd_reg(iproc_i2c, IS_OFFSET); bool ret; u32 sl_status = status & ISR_MASK_SLAVE; @@ -480,7 +493,7 @@ static irqreturn_t bcm_iproc_i2c_isr(int irq, void *data) /* process all master based events */ bcm_iproc_i2c_process_m_event(iproc_i2c, status); - writel(status, iproc_i2c->base + IS_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); return IRQ_HANDLED; } @@ -490,29 +503,29 @@ static int bcm_iproc_i2c_init(struct bcm_iproc_i2c_dev *iproc_i2c) u32 val; /* put controller in reset */ - val = readl(iproc_i2c->base + CFG_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); val |= BIT(CFG_RESET_SHIFT); val &= ~(BIT(CFG_EN_SHIFT)); - writel(val, iproc_i2c->base + CFG_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); /* wait 100 usec per spec */ udelay(100); /* bring controller out of reset */ val &= ~(BIT(CFG_RESET_SHIFT)); - writel(val, iproc_i2c->base + CFG_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); /* flush TX/RX FIFOs and set RX FIFO threshold to zero */ val = (BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT)); - writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); /* disable all interrupts */ - val = readl(iproc_i2c->base + IE_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); val &= ~(IE_M_ALL_INTERRUPT_MASK << IE_M_ALL_INTERRUPT_SHIFT); - writel(val, iproc_i2c->base + IE_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val); /* clear all pending interrupts */ - writel(0xffffffff, iproc_i2c->base + IS_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, 0xffffffff); return 0; } @@ -522,12 +535,12 @@ static void bcm_iproc_i2c_enable_disable(struct bcm_iproc_i2c_dev *iproc_i2c, { u32 val; - val = readl(iproc_i2c->base + CFG_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, CFG_OFFSET); if (enable) val |= BIT(CFG_EN_SHIFT); else val &= ~BIT(CFG_EN_SHIFT); - writel(val, iproc_i2c->base + CFG_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, CFG_OFFSET, val); } static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c, @@ -535,7 +548,7 @@ static int bcm_iproc_i2c_check_status(struct bcm_iproc_i2c_dev *iproc_i2c, { u32 val; - val = readl(iproc_i2c->base + M_CMD_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, M_CMD_OFFSET); val = (val >> M_CMD_STATUS_SHIFT) & M_CMD_STATUS_MASK; switch (val) { @@ -586,15 +599,15 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, u32 val, status; int ret; - writel(cmd, iproc_i2c->base + M_CMD_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, M_CMD_OFFSET, cmd); if (iproc_i2c->irq) { time_left = wait_for_completion_timeout(&iproc_i2c->done, time_left); /* disable all interrupts */ - writel(0, iproc_i2c->base + IE_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); /* read it back to flush the write */ - readl(iproc_i2c->base + IE_OFFSET); + iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); /* make sure the interrupt handler isn't running */ synchronize_irq(iproc_i2c->irq); @@ -602,9 +615,10 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, unsigned long timeout = jiffies + time_left; do { - status = readl(iproc_i2c->base + IS_OFFSET) & ISR_MASK; + status = iproc_i2c_rd_reg(iproc_i2c, + IS_OFFSET) & ISR_MASK; bcm_iproc_i2c_process_m_event(iproc_i2c, status); - writel(status, iproc_i2c->base + IS_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IS_OFFSET, status); if (time_after(jiffies, timeout)) { time_left = 0; @@ -621,7 +635,7 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, /* flush both TX/RX FIFOs */ val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); - writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); return -ETIMEDOUT; } @@ -629,7 +643,7 @@ static int bcm_iproc_i2c_xfer_wait(struct bcm_iproc_i2c_dev *iproc_i2c, if (ret) { /* flush both TX/RX FIFOs */ val = BIT(M_FIFO_RX_FLUSH_SHIFT) | BIT(M_FIFO_TX_FLUSH_SHIFT); - writel(val, iproc_i2c->base + M_FIFO_CTRL_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, val); return ret; } @@ -645,8 +659,8 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, unsigned int tx_bytes; /* check if bus is busy */ - if (!!(readl(iproc_i2c->base + M_CMD_OFFSET) & - BIT(M_CMD_START_BUSY_SHIFT))) { + if (!!(iproc_i2c_rd_reg(iproc_i2c, + M_CMD_OFFSET) & BIT(M_CMD_START_BUSY_SHIFT))) { dev_warn(iproc_i2c->device, "bus is busy\n"); return -EBUSY; } @@ -655,7 +669,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, /* format and load slave address into the TX FIFO */ addr = i2c_8bit_addr_from_msg(msg); - writel(addr, iproc_i2c->base + M_TX_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, addr); /* * For a write transaction, load data into the TX FIFO. Only allow @@ -671,7 +685,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, if (i == msg->len - 1) val |= 1 << M_TX_WR_STATUS_SHIFT; - writel(val, iproc_i2c->base + M_TX_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, M_TX_OFFSET, val); } iproc_i2c->tx_bytes = tx_bytes; } @@ -711,10 +725,10 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, iproc_i2c->thld_bytes = msg->len; /* set threshold value */ - tmp = readl(iproc_i2c->base + M_FIFO_CTRL_OFFSET); + tmp = iproc_i2c_rd_reg(iproc_i2c, M_FIFO_CTRL_OFFSET); tmp &= ~(M_FIFO_RX_THLD_MASK << M_FIFO_RX_THLD_SHIFT); tmp |= iproc_i2c->thld_bytes << M_FIFO_RX_THLD_SHIFT; - writel(tmp, iproc_i2c->base + M_FIFO_CTRL_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, M_FIFO_CTRL_OFFSET, tmp); /* enable the RX threshold interrupt */ val_intr_en |= BIT(IE_M_RX_THLD_SHIFT); @@ -726,7 +740,7 @@ static int bcm_iproc_i2c_xfer_single_msg(struct bcm_iproc_i2c_dev *iproc_i2c, } if (iproc_i2c->irq) - writel(val_intr_en, iproc_i2c->base + IE_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, val_intr_en); return bcm_iproc_i2c_xfer_wait(iproc_i2c, msg, val); } @@ -790,10 +804,10 @@ static int bcm_iproc_i2c_cfg_speed(struct bcm_iproc_i2c_dev *iproc_i2c) } iproc_i2c->bus_speed = bus_speed; - val = readl(iproc_i2c->base + TIM_CFG_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); val &= ~(1 << TIM_CFG_MODE_400_SHIFT); val |= (bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT; - writel(val, iproc_i2c->base + TIM_CFG_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); dev_info(iproc_i2c->device, "bus set to %u Hz\n", bus_speed); @@ -868,8 +882,8 @@ static int bcm_iproc_i2c_remove(struct platform_device *pdev) * Make sure there's no pending interrupt when we remove the * adapter */ - writel(0, iproc_i2c->base + IE_OFFSET); - readl(iproc_i2c->base + IE_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); + iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); synchronize_irq(iproc_i2c->irq); } @@ -890,8 +904,8 @@ static int bcm_iproc_i2c_suspend(struct device *dev) * Make sure there's no pending interrupt when we go into * suspend */ - writel(0, iproc_i2c->base + IE_OFFSET); - readl(iproc_i2c->base + IE_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, 0); + iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); synchronize_irq(iproc_i2c->irq); } @@ -916,10 +930,10 @@ static int bcm_iproc_i2c_resume(struct device *dev) return ret; /* configure to the desired bus speed */ - val = readl(iproc_i2c->base + TIM_CFG_OFFSET); + val = iproc_i2c_rd_reg(iproc_i2c, TIM_CFG_OFFSET); val &= ~(1 << TIM_CFG_MODE_400_SHIFT); val |= (iproc_i2c->bus_speed == 400000) << TIM_CFG_MODE_400_SHIFT; - writel(val, iproc_i2c->base + TIM_CFG_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, TIM_CFG_OFFSET, val); bcm_iproc_i2c_enable_disable(iproc_i2c, true); @@ -963,15 +977,15 @@ static int bcm_iproc_i2c_unreg_slave(struct i2c_client *slave) iproc_i2c->slave = NULL; /* disable all slave interrupts */ - tmp = readl(iproc_i2c->base + IE_OFFSET); + tmp = iproc_i2c_rd_reg(iproc_i2c, IE_OFFSET); tmp &= ~(IE_S_ALL_INTERRUPT_MASK << IE_S_ALL_INTERRUPT_SHIFT); - writel(tmp, iproc_i2c->base + IE_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, IE_OFFSET, tmp); /* Erase the slave address programmed */ - tmp = readl(iproc_i2c->base + S_CFG_SMBUS_ADDR_OFFSET); + tmp = iproc_i2c_rd_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET); tmp &= ~BIT(S_CFG_EN_NIC_SMB_ADDR3_SHIFT); - writel(tmp, iproc_i2c->base + S_CFG_SMBUS_ADDR_OFFSET); + iproc_i2c_wr_reg(iproc_i2c, S_CFG_SMBUS_ADDR_OFFSET, tmp); return 0; }