From: Valerio 'ftp21' Mancini Date: Sat, 26 Aug 2023 22:01:58 +0000 (+0200) Subject: uboot-mediatek: add initial Zyxel EX5601-T0 support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a9cf87027e75c9798bf3cb683a7c32985e4ea483;p=openwrt%2Fstaging%2Fblogic.git uboot-mediatek: add initial Zyxel EX5601-T0 support Flash procedure is described in next commit. TLDR: Copy preloader and uboot to /tmp and write them in the mtd. This will also require new UBI partition and volumes to boot openwrt. mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin bl2 mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip fip Changelist: - Added profile for 4k+256 SPI NAND_TYPE - Added basic Zyxel EX5601-T0 uboot profile Backported from hitech95 branch: - Button RESET pin fix - Button WPS pin fix Signed-off-by: Valerio 'ftp21' Mancini Signed-off-by: Nicolò Veronese --- diff --git a/package/boot/arm-trusted-firmware-mediatek/Makefile b/package/boot/arm-trusted-firmware-mediatek/Makefile index f0b7ba548e35..259a987e6bf9 100644 --- a/package/boot/arm-trusted-firmware-mediatek/Makefile +++ b/package/boot/arm-trusted-firmware-mediatek/Makefile @@ -191,6 +191,15 @@ define Trusted-Firmware-A/mt7986-spim-nand-ddr4 NAND_TYPE:=spim:2k+64 endef +define Trusted-Firmware-A/mt7986-spim-nand-4k-ddr4 + NAME:=MediaTek MT7986 (SPI-NAND via SPIM, DDR4) + BOOT_DEVICE:=spim-nand + BUILD_SUBTARGET:=filogic + PLAT:=mt7986 + DDR_TYPE:=ddr4 + NAND_TYPE:=spim:4k+256 +endef + define Trusted-Firmware-A/mt7986-nor-ddr3 NAME:=MediaTek MT7986 (SPI-NOR, DDR3) BOOT_DEVICE:=nor @@ -377,6 +386,7 @@ TFA_TARGETS:= \ mt7986-sdmmc-ddr4 \ mt7986-snand-ddr4 \ mt7986-spim-nand-ddr4 \ + mt7986-spim-nand-4k-ddr4 \ mt7988-emmc-ddr3 \ mt7988-nor-ddr3 \ mt7988-sdmmc-ddr3 \ diff --git a/package/boot/uboot-mediatek/Makefile b/package/boot/uboot-mediatek/Makefile index a06d323bae81..d0e59d10179a 100644 --- a/package/boot/uboot-mediatek/Makefile +++ b/package/boot/uboot-mediatek/Makefile @@ -453,6 +453,18 @@ define U-Boot/mt7986_xiaomi_redmi-router-ax6000 DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-ddr4 endef +define U-Boot/mt7986_zyxel_ex5601-t0 + NAME:=Zyxel EX5601-T0 + BUILD_SUBTARGET:=filogic + BUILD_DEVICES:=zyxel_ex5601-t0-ubootmod + UBOOT_CONFIG:=mt7986_zyxel_ex5601-t0 + UBOOT_IMAGE:=u-boot.fip + BL2_BOOTDEV:=spim-nand-4k + BL2_SOC:=mt7986 + BL2_DDRTYPE:=ddr4 + DEPENDS:=+trusted-firmware-a-mt7986-spim-nand-4k-ddr4 +endef + define U-Boot/mt7988_rfb-spim-nand NAME:=MT7988 Reference Board BUILD_SUBTARGET:=filogic @@ -552,6 +564,7 @@ UBOOT_TARGETS := \ mt7986_tplink_tl-xdr6086 \ mt7986_tplink_tl-xdr6088 \ mt7986_xiaomi_redmi-router-ax6000 \ + mt7986_zyxel_ex5601-t0 \ mt7986_rfb \ mt7988_rfb-spim-nand \ mt7988_rfb-snand \ diff --git a/package/boot/uboot-mediatek/patches/439-add-zyxel_ex5601-t0.patch b/package/boot/uboot-mediatek/patches/439-add-zyxel_ex5601-t0.patch new file mode 100644 index 000000000000..7f0564fd4974 --- /dev/null +++ b/package/boot/uboot-mediatek/patches/439-add-zyxel_ex5601-t0.patch @@ -0,0 +1,431 @@ +--- /dev/null ++++ b/configs/mt7986_zyxel_ex5601-t0_defconfig +@@ -0,0 +1,186 @@ ++CONFIG_ARM=y ++CONFIG_POSITION_INDEPENDENT=y ++CONFIG_ARCH_MEDIATEK=y ++CONFIG_TARGET_MT7986=y ++CONFIG_TEXT_BASE=0x41e00000 ++CONFIG_SYS_MALLOC_F_LEN=0x4000 ++CONFIG_SYS_HAS_NONCACHED_MEMORY=y ++CONFIG_NR_DRAM_BANKS=1 ++CONFIG_DEFAULT_DEVICE_TREE="mt7986a-zyxel_ex5601-t0" ++CONFIG_DEFAULT_ENV_FILE="zyxel_ex5601-t0_env" ++CONFIG_DEFAULT_FDT_FILE="mediatek/mt7986a-zyxel_ex5601-t0.dtb" ++CONFIG_OF_LIBFDT_OVERLAY=y ++CONFIG_DEBUG_UART_BASE=0x11002000 ++CONFIG_DEBUG_UART_CLOCK=40000000 ++CONFIG_DEBUG_UART=y ++CONFIG_SYS_LOAD_ADDR=0x46000000 ++CONFIG_SMBIOS_PRODUCT_NAME="" ++CONFIG_AUTOBOOT_KEYED=y ++CONFIG_BOOTDELAY=30 ++CONFIG_AUTOBOOT_MENU_SHOW=y ++CONFIG_CFB_CONSOLE_ANSI=y ++CONFIG_BOARD_LATE_INIT=y ++CONFIG_BUTTON=y ++CONFIG_BUTTON_GPIO=y ++CONFIG_GPIO_HOG=y ++CONFIG_CMD_ENV_FLAGS=y ++CONFIG_FIT=y ++CONFIG_FIT_ENABLE_SHA256_SUPPORT=y ++CONFIG_LED=y ++CONFIG_LED_BLINK=y ++CONFIG_LED_GPIO=y ++CONFIG_LOGLEVEL=7 ++CONFIG_LOG=y ++CONFIG_SYS_PROMPT="EX5601> " ++CONFIG_CMD_BOOTMENU=y ++CONFIG_CMD_BOOTP=y ++CONFIG_CMD_BUTTON=y ++CONFIG_CMD_CACHE=y ++CONFIG_CMD_CDP=y ++CONFIG_CMD_CPU=y ++CONFIG_CMD_DHCP=y ++CONFIG_CMD_DM=y ++CONFIG_CMD_DNS=y ++CONFIG_CMD_ECHO=y ++CONFIG_CMD_ENV_READMEM=y ++CONFIG_CMD_ERASEENV=y ++CONFIG_CMD_EXT4=y ++CONFIG_CMD_FAT=y ++CONFIG_CMD_FDT=y ++CONFIG_CMD_FS_GENERIC=y ++CONFIG_CMD_FS_UUID=y ++CONFIG_CMD_GPIO=y ++CONFIG_CMD_GPT=y ++CONFIG_CMD_HASH=y ++CONFIG_CMD_ITEST=y ++CONFIG_CMD_LED=y ++CONFIG_CMD_LICENSE=y ++CONFIG_CMD_LINK_LOCAL=y ++# CONFIG_CMD_MBR is not set ++CONFIG_CMD_MTD=y ++CONFIG_CMD_PCI=y ++CONFIG_CMD_PSTORE=y ++CONFIG_CMD_PSTORE_MEM_ADDR=0x42ff0000 ++CONFIG_CMD_SF_TEST=y ++CONFIG_CMD_PING=y ++CONFIG_CMD_PXE=y ++CONFIG_CMD_PWM=y ++CONFIG_CMD_SMC=y ++CONFIG_CMD_TFTPBOOT=y ++CONFIG_CMD_TFTPSRV=y ++CONFIG_CMD_UBI=y ++CONFIG_CMD_UBI_RENAME=y ++CONFIG_CMD_UBIFS=y ++CONFIG_CMD_ASKENV=y ++CONFIG_CMD_PART=y ++CONFIG_CMD_RARP=y ++CONFIG_CMD_SETEXPR=y ++CONFIG_CMD_SLEEP=y ++CONFIG_CMD_SNTP=y ++CONFIG_CMD_SOURCE=y ++CONFIG_CMD_STRINGS=y ++CONFIG_CMD_USB=y ++# CONFIG_CMD_FLASH is not set ++CONFIG_CMD_UUID=y ++CONFIG_DISPLAY_CPUINFO=y ++CONFIG_DM_MTD=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_REGULATOR_GPIO=y ++CONFIG_DM_USB=y ++CONFIG_DM_PWM=y ++CONFIG_PWM_MTK=y ++CONFIG_HUSH_PARSER=y ++CONFIG_SYS_REDUNDAND_ENVIRONMENT=y ++CONFIG_SYS_RELOC_GD_ENV_ADDR=y ++CONFIG_VERSION_VARIABLE=y ++CONFIG_PARTITION_UUIDS=y ++CONFIG_NETCONSOLE=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_DM_GPIO=y ++CONFIG_DM_SCSI=y ++CONFIG_AHCI=y ++CONFIG_AHCI_PCI=y ++CONFIG_SCSI_AHCI=y ++CONFIG_SCSI=y ++CONFIG_CMD_SCSI=y ++CONFIG_PHY=y ++CONFIG_PHY_MTK_TPHY=y ++CONFIG_PHY_FIXED=y ++CONFIG_MTK_AHCI=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PCI=y ++CONFIG_DM_PCI=y ++CONFIG_PCIE_MEDIATEK=y ++# CONFIG_MMC is not set ++# CONFIG_DM_MMC is not set ++CONFIG_MTD=y ++CONFIG_MTD_UBI_FASTMAP=y ++# CONFIG_DM_PCI is not set ++# CONFIG_PCIE_MEDIATEK is not set ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7622=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_PRE_CONSOLE_BUFFER=y ++CONFIG_PRE_CON_BUF_ADDR=0x4007EF00 ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_RAM=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_SPI=y ++# CONFIG_I2C is not set ++CONFIG_DM_SPI=y ++CONFIG_MTK_SPI_NAND=y ++CONFIG_MTK_SPI_NAND_MTD=y ++CONFIG_SYSRESET_WATCHDOG=y ++CONFIG_WDT_MTK=y ++CONFIG_LZO=y ++CONFIG_ZSTD=y ++CONFIG_HEXDUMP=y ++CONFIG_RANDOM_UUID=y ++CONFIG_REGEX=y ++CONFIG_USB=y ++CONFIG_USB_HOST=y ++CONFIG_USB_XHCI_HCD=y ++CONFIG_USB_XHCI_MTK=y ++CONFIG_USB_STORAGE=y ++CONFIG_OF_EMBED=y ++CONFIG_ENV_OVERWRITE=y ++CONFIG_ENV_IS_IN_UBI=y ++CONFIG_ENV_UBI_PART="ubi" ++CONFIG_ENV_SIZE=0x1f000 ++CONFIG_ENV_SIZE_REDUND=0x1f000 ++CONFIG_ENV_UBI_VOLUME="ubootenv" ++CONFIG_ENV_UBI_VOLUME_REDUND="ubootenv2" ++CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y ++CONFIG_NET_RANDOM_ETHADDR=y ++CONFIG_REGMAP=y ++CONFIG_SYSCON=y ++CONFIG_CLK=y ++CONFIG_PHY_FIXED=y ++CONFIG_DM_ETH=y ++CONFIG_MEDIATEK_ETH=y ++CONFIG_PINCTRL=y ++CONFIG_PINCONF=y ++CONFIG_PINCTRL_MT7986=y ++CONFIG_POWER_DOMAIN=y ++CONFIG_MTK_POWER_DOMAIN=y ++CONFIG_DM_REGULATOR=y ++CONFIG_DM_REGULATOR_FIXED=y ++CONFIG_DM_SERIAL=y ++CONFIG_MTK_SERIAL=y ++CONFIG_HEXDUMP=y ++CONFIG_USE_DEFAULT_ENV_FILE=y ++CONFIG_MTD_SPI_NAND=y ++CONFIG_MTK_SPIM=y ++CONFIG_CMD_NAND=y ++CONFIG_CMD_NAND_TRIMFFS=y ++CONFIG_LMB_MAX_REGIONS=64 ++CONFIG_USE_IPADDR=y ++CONFIG_IPADDR="192.168.1.1" ++CONFIG_USE_SERVERIP=y ++CONFIG_SERVERIP="192.168.1.254" +--- /dev/null ++++ b/arch/arm/dts/mt7986a-zyxel_ex5601-t0.dts +@@ -0,0 +1,181 @@ ++// SPDX-License-Identifier: GPL-2.0 ++/* ++ * Author: Valerio 'ftp21' Mancini ++ * Author: Nicolò Veronese ++ */ ++ ++/dts-v1/; ++#include ++#include "mt7986.dtsi" ++#include ++ ++/ { ++ #address-cells = <1>; ++ #size-cells = <1>; ++ model = "Zyxel EX5601-T0 ubootmod"; ++ compatible = "mediatek,mt7986", "mediatek,mt7986-sd-rfb"; ++ ++ chosen { ++ stdout-path = &uart0; ++ tick-timer = &timer0; ++ }; ++ ++ memory@40000000 { ++ device_type = "memory"; ++ reg = <0x40000000 0x20000000>; ++ }; ++ ++ keys { ++ compatible = "gpio-keys"; ++ factory { ++ label = "reset"; ++ gpios = <&gpio 21 GPIO_ACTIVE_LOW>; ++ linux,code = ; ++ }; ++ ++ wps { ++ label = "wps"; ++ gpios = <&gpio 56 GPIO_ACTIVE_LOW>; ++ linux,code = ; ++ }; ++ }; ++ ++ leds { ++ compatible = "gpio-leds"; ++ ++ led_status_green: pwr { ++ label = "green:status"; ++ gpios = <&gpio 13 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ }; ++ ++ led_sfp_green: sfp { ++ label = "green:sfp"; ++ gpios = <&gpio 24 GPIO_ACTIVE_HIGH>; ++ default-state = "off"; ++ }; ++ }; ++}; ++ ++&uart0 { ++ mediatek,force-highspeed; ++ status = "okay"; ++}; ++ ++&uart1 { ++ pinctrl-names = "default"; ++ pinctrl-0 = <&uart1_pins>; ++ status = "disabled"; ++}; ++ ++ð { ++ status = "okay"; ++ mediatek,gmac-id = <0>; ++ phy-mode = "2500base-x"; ++ mediatek,switch = "mt7531"; ++ reset-gpios = <&gpio 5 GPIO_ACTIVE_HIGH>; ++ ++ fixed-link { ++ speed = <2500>; ++ full-duplex; ++ }; ++}; ++ ++&pinctrl { ++ spic_pins: spi1-pins-func-1 { ++ mux { ++ function = "spi"; ++ groups = "spi1_2"; ++ }; ++ }; ++ ++ uart1_pins: spi1-pins-func-3 { ++ mux { ++ function = "uart"; ++ groups = "uart1_2"; ++ }; ++ }; ++ ++ spi_flash_pins: spi0-pins-func-1 { ++ mux { ++ function = "flash"; ++ groups = "spi0", "spi0_wp_hold"; ++ }; ++ ++ conf-pu { ++ pins = "SPI2_CS", "SPI2_HOLD", "SPI2_WP"; ++ drive-strength = ; ++ bias-pull-up = ; ++ }; ++ ++ conf-pd { ++ pins = "SPI2_CLK", "SPI2_MOSI", "SPI2_MISO"; ++ drive-strength = ; ++ bias-pull-down = ; ++ }; ++ }; ++}; ++ ++&spi0 { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ pinctrl-names = "default"; ++ pinctrl-0 = <&spi_flash_pins>; ++ status = "okay"; ++ must_tx; ++ enhance_timing; ++ dma_ext; ++ ipm_design; ++ support_quad; ++ tick_dly = <1>; ++ sample_sel = <0>; ++ ++ spi_nand@0 { ++ compatible = "spi-nand"; ++ reg = <0>; ++ spi-max-frequency = <20000000>; ++ spi-tx-buswidth = <4>; ++ spi-rx-buswidth = <4>; ++ ++ partitions { ++ compatible = "fixed-partitions"; ++ #address-cells = <1>; ++ #size-cells = <1>; ++ ++ partition@0 { ++ label = "bl2"; ++ reg = <0x0 0x100000>; ++ }; ++ ++ partition@100000 { ++ label = "u-boot-env"; ++ reg = <0x0100000 0x0080000>; ++ }; ++ ++ partition@180000 { ++ label = "Factory"; ++ reg = <0x180000 0x0200000>; ++ }; ++ ++ partition@380000 { ++ label = "fip"; ++ reg = <0x380000 0x0200000>; ++ }; ++ ++ partition@540000 { ++ label = "zloader"; ++ reg = <0x540000 0x0040000>; ++ read-only; ++ }; ++ partition@580000 { ++ label = "ubi"; ++ reg = <0x580000 0x1da80000>; ++ }; ++ }; ++ }; ++}; ++ ++&watchdog { ++ status = "disabled"; ++}; ++ +--- /dev/null ++++ b/zyxel_ex5601-t0_env +@@ -0,0 +1,55 @@ ++ethaddr_factory=mtd read Factory 0x40080000 0x0 0x20000 && env readmem -b ethaddr 0x4008002A 0x6 ; setenv ethaddr_factory ++ipaddr=192.168.1.1 ++serverip=192.168.1.254 ++loadaddr=0x46000000 ++console=earlycon=uart8250,mmio32,0x11002000 console=ttyS0 ++bootargs=console=ttyS0,115200n8 console_msg_format=syslog ++bootcmd=if pstore check ; then run boot_recovery ; else run boot_ubi ; fi ++bootconf=config-1 ++bootdelay=0 ++bootfile=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb ++bootfile_bl2=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin ++bootfile_fip=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip ++bootfile_upg=openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-squashfs-sysupgrade.itb ++bootmenu_confirm_return=askenv - Press ENTER to return to menu ; bootmenu 60 ++bootmenu_default=0 ++bootmenu_delay=0 ++bootmenu_title= ( ( ( OpenWrt ) ) ) ++bootmenu_0=Initialize environment.=run _firstboot ++bootmenu_0d=Run default boot command.=run boot_default ++bootmenu_1=Boot system via TFTP.=run boot_tftp ; run bootmenu_confirm_return ++bootmenu_2=Boot production system from NAND.=run boot_production ; run bootmenu_confirm_return ++bootmenu_3=Boot recovery system from NAND.=run boot_recovery ; run bootmenu_confirm_return ++bootmenu_4=Load production system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_production ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_5=Load recovery system via TFTP then write to NAND.=setenv noboot 1 ; setenv replacevol 1 ; run boot_tftp_recovery ; setenv noboot ; setenv replacevol ; run bootmenu_confirm_return ++bootmenu_6=Load BL31+U-Boot FIP via TFTP then write to NAND.=run boot_tftp_write_fip ; run bootmenu_confirm_return ++bootmenu_7=Load BL2 preloader via TFTP then write to NAND.=run boot_tftp_write_bl2 ; run bootmenu_confirm_return ++bootmenu_8=Reboot.=reset ++bootmenu_9=Reset all settings to factory defaults.=run reset_factory ; reset ++boot_first=if button reset ; then run boot_tftp_recovery ; setenv flag_recover 1 ; run boot_default ; fi ; bootmenu ++boot_default=if env exists flag_recover ; then else run bootcmd ; fi ; run boot_recovery ; setenv replacevol 1 ; run boot_tftp_forever ++boot_production=run ubi_read_production && bootm $loadaddr#$bootconf ++boot_recovery=run ubi_read_recovery && bootm $loadaddr#$bootconf ++boot_ubi=run boot_production ; run boot_recovery ; run boot_tftp_forever ++boot_tftp_forever=while true ; do run boot_tftp_recovery ; sleep 1 ; done ++boot_tftp_recovery=tftpboot $loadaddr $bootfile && env exists replacevol && iminfo $loadaddr && run ubi_write_recovery ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp_production=tftpboot $loadaddr $bootfile_upg && env exists replacevol && iminfo $loadaddr && run ubi_write_production ; if env exists noboot ; then else bootm $loadaddr#$bootconf ; fi ++boot_tftp=tftpboot $loadaddr $bootfile && bootm $loadaddr#$bootconf ++boot_tftp_write_fip=tftpboot $loadaddr $bootfile_fip && run mtd_write_fip && run reset_factory ++boot_tftp_write_bl2=tftpboot $loadaddr $bootfile_bl2 && run mtd_write_bl2 ++part_fit=fit ++reset_factory=ubi part ubi ; mw $loadaddr 0x0 0x800 ; ubi write $loadaddr ubootenv 0x800 ; ubi write $loadaddr ubootenv2 0x800 ++mtd_write_fip=mtd erase fip && mtd write fip $loadaddr ++mtd_write_bl2=mtd erase bl2 && mtd write bl2 $loadaddr ++ubi_create_env=ubi check ubootenv || ubi create ubootenv 0x100000 dynamic 0 ; ubi check ubootenv2 || ubi create ubootenv2 0x100000 dynamic 1 ++ubi_format=ubi detach ; mtd erase ubi && ubi part ubi ; reset ++ubi_prepare_rootfs=if ubi check rootfs_data ; then else if env exists rootfs_data_max ; then ubi create rootfs_data $rootfs_data_max dynamic || ubi create rootfs_data - dynamic ; else ubi create rootfs_data - dynamic ; fi ; fi ++ubi_read_production=ubi read $loadaddr $part_fit && iminfo $loadaddr && run ubi_prepare_rootfs ++ubi_read_recovery=ubi check recovery && ubi read $loadaddr recovery ++ubi_remove_rootfs=ubi check rootfs_data && ubi remove rootfs_data ++ubi_write_production=ubi check fit && ubi remove fit ; run ubi_remove_rootfs ; ubi create fit $filesize dynamic && ubi write $loadaddr fit $filesize ++ubi_write_recovery=ubi check recovery && ubi remove recovery ; run ubi_remove_rootfs ; ubi create recovery $filesize dynamic && ubi write $loadaddr recovery $filesize ++_init_env=setenv _init_env ; run ubi_create_env ; saveenv ; saveenv ++_firstboot=setenv _firstboot ; run ethaddr_factory ; run _switch_to_menu ; run _init_env ; run boot_first ++_switch_to_menu=setenv _switch_to_menu ; setenv bootdelay 3 ; setenv bootmenu_delay 3 ; setenv bootmenu_0 $bootmenu_0d ; setenv bootmenu_0d ; run _bootmenu_update_title ++_bootmenu_update_title=setenv _bootmenu_update_title ; setenv bootmenu_title "$bootmenu_title $ver"