From: John Crispin Date: Fri, 2 Nov 2012 20:07:47 +0000 (+0000) Subject: adds dts files and make devicetree images buildable X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a9ad36b7f1da67dfefcaf9ecb07b8507b3c3a23a;p=openwrt%2Fstaging%2Fluka.git adds dts files and make devicetree images buildable SVN-Revision: 34064 --- diff --git a/target/linux/lantiq/image/ARV7525PW.dts b/target/linux/lantiq/image/ARV7525PW.dts new file mode 100644 index 0000000000..1d47927c20 --- /dev/null +++ b/target/linux/lantiq/image/ARV7525PW.dts @@ -0,0 +1,159 @@ +/dts-v1/; + +/include/ "danube.dtsi" + +/ { + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + }; + + partition@20000 { + label = "linux"; + reg = <0x20000 0x3c0000>; + }; + + partition@400000 { + label = "boardconfig"; + reg = <0x3f0000 0x10000>; + }; + }; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1", "req1"; + lantiq,function = "pci"; + }; + }; + }; + + adsl: dsl@E116000 { + compatible = "lantiq,dsl-xway"; + interrupt-parent = <&icu0>; + interrupts = <63 96>; + }; + etop@E180000 { + compatible = "lantiq,etop-xway"; + reg = <0xE180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <73 78>; + phy-mode = "rmii"; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + pci@E105400 { + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x7000 0 0 1 &icu0 30 1 // slot 14, irq 29 + >; + gpios-reset = <&gpio 21 0>; + req-mask = <0x1>; /* GNT1 */ + }; + + }; + + sflash@E100800 { + compatible = "lantiq,sflash_at45"; + reg = <0xE100800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + }; + + partition@20000 { + label = "linux"; + reg = <0x20000 0x1d0000>; + }; + }; + + gpio-keys { + compatible = "gpio-keys1"; + reset { + label = "Reset"; + gpios = <&gpio 29 1>; + gpio-key,wakeup; + linux,code = <0x100>; + }; + }; + gpio-leds { + compatible = "gpio-leds"; + festnetz { + label = "Festnetz"; + gpios = <&gpio 4 1>; + default-state = "on"; + }; + internet { + label = "Internet"; + gpios = <&gpio 5 1>; + default-state = "on"; + }; + wlan { + label = "WLan"; + gpios = <&gpio 6 1>; + default-state = "on"; + }; + online { + label = "Online"; + gpios = <&gpio 8 1>; + default-state = "on"; + }; + dsl { + label = "DSL"; + gpios = <&gpio 9 1>; + default-state = "on"; + }; + }; +}; diff --git a/target/linux/lantiq/image/DGN1000B.dts b/target/linux/lantiq/image/DGN1000B.dts new file mode 100644 index 0000000000..9fac104b2f --- /dev/null +++ b/target/linux/lantiq/image/DGN1000B.dts @@ -0,0 +1,157 @@ +/dts-v1/; + +/include/ "amazonse.dtsi" + +/ { + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + reg = <0x0 0x1000000>; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-ase"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + spi { + lantiq,groups = "spi", "spi_cs1"; + lantiq,function = "spi"; + }; + asc { + lantiq,groups = "asc"; + lantiq,function = "asc"; + }; + exin { + lantiq,groups = "exin1", "exin2"; + lantiq,function = "exin"; + }; + conf_in { + lantiq,pins = "io0", "io29"; /* nand rdy */ + lantiq,pull = <2>; + }; + }; + }; + + adsl: dsl@E116000 { + compatible = "lantiq,dsl-xway"; + interrupt-parent = <&icu0>; + interrupts = <63 96>; + }; + + etop@E180000 { + compatible = "lantiq,etop-xway"; + reg = <0xE180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <105 109>; + phy-mode = "ephy"; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + spi@E100800 { + compatible = "lantiq,spi-xway"; + reg = <0xE100800 0x100>; + interrupt-parent = <&icu0>; + interrupts = <24 25 26>; + #address-cells = <1>; + #size-cells = <1>; + + m25p80@0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "s25fl129p0"; + reg = <0 0>; + linux,modalias = "m25p80", "mx25l3205d"; + spi-max-frequency = <5000000>; + + partition@0 { + reg = <0x0 0x20000>; + label = "SPI (RO) U-Boot Image"; + read-only; + }; + + partition@20000 { + reg = <0x20000 0x10000>; + label = "ENV_MAC"; + read-only; + }; + + partition@30000 { + reg = <0x30000 0x10000>; + label = "DPF"; + read-only; + }; + + partition@40000 { + reg = <0x40000 0x10000>; + label = "NVRAM"; + read-only; + }; + + partition@500000 { + reg = <0x50000 0x003a0000>; + label = "kernel"; + }; + }; + }; + }; + + /* missing button on <&gpio 25 0> */ +/* gpio-keys { + compatible = "gpio-keys"; + interrupt-parent = <&icu0>; + interrupts = <30 31>; + reset { + label = "Reset"; + gpios = <&gpio 0 0>; + gpio-key,wakeup; + linux,code = <0x100>; + }; + wps { + label = "WPS"; + gpios = <&gpio 29 1>; + gpio-key,wakeup; + linux,code = <0x100>; + }; + }; +*/ + gpio-leds { + compatible = "gpio-leds"; + festnetz { + label = "DSL"; + gpios = <&gpio 1 1>; + default-state = "on"; + }; + internet1 { + label = "Internet1"; + gpios = <&gpio 2 1>; + default-state = "on"; + }; + internet2 { + label = "Internet2"; + gpios = <&gpio 3 1>; + default-state = "on"; + }; + wps { + label = "WPS"; + gpios = <&gpio 4 1>; + default-state = "on"; + }; + power { + label = "power"; + gpios = <&gpio 13 1>; + default-state = "on"; + }; + }; +}; diff --git a/target/linux/lantiq/image/EASY50712.dts b/target/linux/lantiq/image/EASY50712.dts new file mode 100644 index 0000000000..68c17310bc --- /dev/null +++ b/target/linux/lantiq/image/EASY50712.dts @@ -0,0 +1,113 @@ +/dts-v1/; + +/include/ "danube.dtsi" + +/ { + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + reg = <0x0 0x2000000>; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + ranges = <0 0 0x0 0x3ffffff /* addrsel0 */ + 1 0 0x4000000 0x4000010>; /* addsel1 */ + compatible = "lantiq,localbus", "simple-bus"; + + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; /* 64 KB */ + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; /* 64 KB */ + }; + + partition@20000 { + label = "linux"; + reg = <0x20000 0x3d0000>; + }; + + partition@400000 { + label = "rootfs"; + reg = <0x400000 0x400000>; + }; + }; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xway"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + exin { + lantiq,groups = "exin1"; + lantiq,function = "exin"; + }; + pci { + lantiq,groups = "gnt1"; + lantiq,function = "pci"; + }; + conf_out { + lantiq,pins = "io4", "io5", "io6"; /* stp */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + }; + }; + + etop@E180000 { + compatible = "lantiq,etop-xway"; + reg = <0xE180000 0x40000>; + interrupt-parent = <&icu0>; + interrupts = <73 78>; + phy-mode = "rmii"; + mac-address = [ 00 11 22 33 44 55 ]; + }; + + stp0: stp@E100BB0 { + #gpio-cells = <2>; + compatible = "lantiq,gpio-stp-xway"; + gpio-controller; + reg = <0xE100BB0 0x40>; + + lantiq,shadow = <0xfff>; + lantiq,groups = <0x3>; + }; + + pci@E105400 { + lantiq,bus-clock = <33333333>; + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 + >; + gpios-reset = <&gpio 21 0>; + req-mask = <0x1>; /* GNT1 */ + }; + + }; +}; diff --git a/target/linux/lantiq/image/EASY80920-NAND.dts b/target/linux/lantiq/image/EASY80920-NAND.dts new file mode 100644 index 0000000000..afa2157247 --- /dev/null +++ b/target/linux/lantiq/image/EASY80920-NAND.dts @@ -0,0 +1,35 @@ +/dts-v1/; + + +/include/ "EASY80920.dtsi" + +/ { + fpi@10000000 { + localbus@0 { + ranges = <0 0 0x4000000 0x3ffffff>; + nand-parts@0 { + compatible = "gen_nand", "lantiq,nand-xway"; + lantiq,cs = <1>; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x40000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x40000 0x40000>; + }; + + partition@20000 { + label = "linux"; + reg = <0x80000 0x3f80000>; + }; + }; + }; + }; +}; diff --git a/target/linux/lantiq/image/EASY80920-NOR.dts b/target/linux/lantiq/image/EASY80920-NOR.dts new file mode 100644 index 0000000000..94f4cc1ec5 --- /dev/null +++ b/target/linux/lantiq/image/EASY80920-NOR.dts @@ -0,0 +1,34 @@ +/dts-v1/; + + +/include/ "EASY80920.dtsi" + +/ { + fpi@10000000 { + localbus@0 { + ranges = <0 0 0x0 0x3ffffff>; + nor-boot@0 { + compatible = "lantiq,nor"; + bank-width = <2>; + reg = <0 0x0 0x2000000>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + }; + + partition@20000 { + label = "linux"; + reg = <0x20000 0x7e0000>; + }; + }; + }; + }; +}; diff --git a/target/linux/lantiq/image/EASY80920.dtsi b/target/linux/lantiq/image/EASY80920.dtsi new file mode 100644 index 0000000000..332df3d147 --- /dev/null +++ b/target/linux/lantiq/image/EASY80920.dtsi @@ -0,0 +1,318 @@ +/include/ "vr9.dtsi" + +/ { + chosen { + bootargs = "console=ttyLTQ0,115200 init=/etc/preinit"; + }; + + memory@0 { + reg = <0x0 0x4000000>; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + localbus@0 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "lantiq,localbus", "simple-bus"; + + }; + + sflash@E100800 { + compatible = "lantiq,sflash"; + reg = <0xE100800 0x100>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "uboot"; + reg = <0x00000 0x10000>; + }; + + partition@10000 { + label = "uboot_env"; + reg = <0x10000 0x10000>; + }; + + partition@20000 { + label = "linux"; + reg = <0x20000 0x1d0000>; + }; + }; + + gpio: pinmux@E100B10 { + compatible = "lantiq,pinctrl-xr9"; + pinctrl-names = "default"; + pinctrl-0 = <&state_default>; + + interrupt-parent = <&icu0>; + interrupts = <166 135 66 40 41 42 38>; + + #gpio-cells = <2>; + gpio-controller; + reg = <0xE100B10 0xA0>; + + state_default: pinmux { + stp { + lantiq,groups = "stp"; + lantiq,function = "stp"; + }; + /*spi { + lantiq,groups = "spi", "spi_cs4"; + lantiq,function = "spi"; + };*/ + nand { + lantiq,groups = "nand cle", "nand ale", + "nand rd", "nand rdy"; + lantiq,function = "ebu"; + }; + mdio { + lantiq,groups = "mdio"; + lantiq,function = "mdio"; + }; + pci { + lantiq,groups = "gnt1", "req1"; + lantiq,function = "pci"; + }; + exin { + lantiq,groups = "exin3"; + lantiq,function = "exin"; + }; + conf_out { + lantiq,pins = "io24", "io13", "io49", /* nand cle, ale and rd */ + "io4", "io5", "io6", /* stp */ + "io17", "io18", /* spi dout & clk */ + "io21", /* pci-rst */ + "io38"; /* pcie-rst */ + lantiq,open-drain; + lantiq,pull = <0>; + }; + conf_in { + lantiq,pins = "io39", /* exin3 */ + "io48"; /* nand rdy */ + lantiq,pull = <2>; + }; + }; + }; + + eth@0xE108000 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-net"; + reg = < 0xE108000 0x3000 /* switch */ + 0xE10B100 0x70 /* mdio */ + 0xE10B1D8 0x30 /* mii */ + 0xE10B308 0x30 /* pmac */ + >; + interrupt-parent = <&icu0>; + interrupts = <73 72>; + + lan: interface@0 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + mac-address = [ 00 11 22 33 44 55 ]; + + ethernet@0 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <0>; + phy-mode = "rgmii"; + phy-handle = <&phy0>; + }; + ethernet@1 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <1>; + phy-mode = "rgmii"; + phy-handle = <&phy1>; + }; + ethernet@2 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <2>; + phy-mode = "gmii"; + phy-handle = <&phy11>; + }; + ethernet@4 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <4>; + phynmode0 = "gmii"; + phy-handle = <&phy13>; + }; + }; + + wan: interface@1 { + compatible = "lantiq,xrx200-pdi"; + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + mac-address = [ 00 11 22 33 44 56 ]; + + ethernet@5 { + compatible = "lantiq,xrx200-pdi-port"; + reg = <5>; + phy-mode = "rgmii"; + phy-handle = <&phy5>; + }; + }; + + mdio@0 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "lantiq,xrx200-mdio"; + phy0: ethernet-phy@0 { + reg = <0x0>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,c45-reg-init = <1 0 0 0>; + }; + phy1: ethernet-phy@1 { + reg = <0x1>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,c45-reg-init = <1 0 0 0>; + }; + phy5: ethernet-phy@5 { + reg = <0x5>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,c45-reg-init = <1 0 0 0>; + }; + phy11: ethernet-phy@11 { + reg = <0x11>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,c45-reg-init = <1 0 0 0>; + }; + phy13: ethernet-phy@13 { + reg = <0x13>; + compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22"; + lantiq,c45-reg-init = <1 0 0 0>; + }; + }; + }; + + stp: stp@E100BB0 { + compatible = "lantiq,gpio-stp-xway"; + reg = <0xE100BB0 0x40>; + #gpio-cells = <2>; + gpio-controller; + + lantiq,shadow = <0xffff>; + lantiq,groups = <0x7>; + lantiq,dsl = <0x3>; + lantiq,phy1 = <0x7>; + lantiq,phy2 = <0x7>; + /* lantiq,rising; */ + }; + + pci@E105400 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xE105400 0x400>; /* pci bridge */ + lantiq,bus-clock = <33333333>; + /*lantiq,external-clock;*/ + lantiq,delay-hi = <0>; /* 0ns delay */ + lantiq,delay-lo = <0>; /* 0.0ns delay */ + interrupt-map-mask = <0xf800 0x0 0x0 0x7>; + interrupt-map = < + 0x7000 0 0 1 &icu0 29 1 // slot 14, irq 29 + >; + gpios-reset = <&gpio 21 0>; + req-mask = <0x1>; /* GNT1 */ + }; + }; + + ifxhcd { + compatible = "lantiq,ifxhcd"; + interrupt-parent = <&icu0>; + interrupts = <62 91>; + }; + + gphy-xrx200 { + compatible = "lantiq,phy-xrx200"; + firmware = "lantiq/vr9_phy11g_a2x.bin"; + phys = [ 00 01 ]; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <100>; + reset { + label = "Reset"; + gpios = <&gpio 7 0>; + linux,code = <0x100>; + }; + paging { + label = "paging"; + gpios = <&gpio 11 1>; + linux,code = <0x100>; + }; + }; + +/* gpio-keys { + compatible = "gpio-keys"; + wps { + gpios = <&gpio 39 0>; + linux,code = <0x100>; + }; + };*/ + + gpio-leds { + compatible = "gpio-leds"; + + led0 { + label = "led0"; + gpios = <&stp 9 0>; + default-state = "on"; + }; + warning { + label = "warning"; + gpios = <&stp 22 0>; + default-state = "on"; + }; + fxs1 { + label = "fxs1"; + gpios = <&stp 21 0>; + default-state = "on"; + }; + fxs2 { + label = "fxs2"; + gpios = <&stp 20 0>; + default-state = "on"; + }; + fxo { + label = "fxo"; + gpios = <&stp 19 0>; + default-state = "on"; + }; + usb1 { + label = "usb1"; + gpios = <&stp 18 0>; + default-state = "on"; + }; + usb2 { + label = "usb2"; + gpios = <&stp 15 0>; + default-state = "on"; + }; + sd { + label = "sd"; + gpios = <&stp 14 0>; + default-state = "on"; + }; + wps { + label = "wps"; + gpios = <&stp 12 0>; + default-state = "on"; + }; + }; +}; diff --git a/target/linux/lantiq/image/Makefile b/target/linux/lantiq/image/Makefile index 96179a5bc1..de5365e676 100644 --- a/target/linux/lantiq/image/Makefile +++ b/target/linux/lantiq/image/Makefile @@ -21,7 +21,12 @@ endef define PatchKernelLzma cp $(KDIR)/vmlinux $(KDIR)/vmlinux-$(1) +ifeq ($(CONFIG_LINUX_3_5),y) + $(LINUX_DIR)/scripts/dtc/dtc -O dtb -o $(KDIR)/$(1).dtb ./$(1).dts + $(STAGING_DIR_HOST)/bin/patch-dtb $(KDIR)/vmlinux-$(1) $(KDIR)/$(1).dtb +else $(STAGING_DIR_HOST)/bin/patch-cmdline $(KDIR)/vmlinux-$(1) '$(strip $(2))' +endif $(call CompressLzma,$(KDIR)/vmlinux-$(1),$(KDIR)/vmlinux-$(1).lzma) endef @@ -190,17 +195,18 @@ endif ifeq ($(CONFIG_TARGET_lantiq_ase),y) -Image/BuildKernel/Profile/EASY50601=$(call Image/BuildKernel/Template,EASY50601,$(ase_cmdline)) -Image/Build/Profile/EASY50601=$(call Image/Build/$(1),$(1),EASY50601) +Image/BuildKernel/Profile/DGN1000B=$(call Image/BuildKernel/Template,DGN1000B) +Image/Build/Profile/DGN1000B=$(call Image/Build/$(1),$(1),DGN1000B) -define Image/BuildKernel/Profile/Generic - $(call Image/BuildKernel/Template,NONE) -endef +endif + +ifeq ($(CONFIG_TARGET_lantiq_xway),y) + +Image/BuildKernel/Profile/EASY80920-NAND=$(call Image/BuildKernel/Template,EASY80920-NAND) +Image/Build/Profile/EASY80920-NAND=$(call Image/Build/$(1),$(1),EASY80920-NAND) +Image/BuildKernel/Profile/EASY80920-NOR=$(call Image/BuildKernel/Template,EASY80920-NOR) +Image/Build/Profile/EASY80920-NOR=$(call Image/Build/$(1),$(1),EASY80920-NOR) -define Image/Build/Profile/Generic - $(call Image/Build/$(1),$(1),NONE) - $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/$(IMG_PREFIX)-$(1).rootfs -endef endif ifeq ($(CONFIG_TARGET_lantiq_vr9),y) diff --git a/target/linux/lantiq/image/amazonse.dtsi b/target/linux/lantiq/image/amazonse.dtsi new file mode 100644 index 0000000000..f8e6f594ed --- /dev/null +++ b/target/linux/lantiq/image/amazonse.dtsi @@ -0,0 +1,107 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,ase"; + + cpus { + cpu@0 { + compatible = "mips,mips4Kc"; + }; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt1"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram", "simple-bus"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent; + compatible = "lantiq,eiu"; + reg = <0x101000 0x1000>; + lantiq,count = <3>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xway"; + reg = <0x203000 0x1000>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <97 98 99 100 101 102>; + }; + + serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <72 74 75>; + }; + + hcd@E101000 { + compatible = "lantiq,hcd"; + reg = <0xE101000 0x100>; + interrupt-parent = <&icu0>; + interrupts = <39>; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + }; +}; diff --git a/target/linux/lantiq/image/danube.dtsi b/target/linux/lantiq/image/danube.dtsi new file mode 100644 index 0000000000..9f0fae009c --- /dev/null +++ b/target/linux/lantiq/image/danube.dtsi @@ -0,0 +1,111 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,danube"; + + cpus { + cpu@0 { + compatible = "mips,mips24Kc"; + }; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xway"; + reg = <0x203000 0x1000>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <126 127 128 129 130 131>; + }; + + serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + + pci0: pci@E105400 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xE105400 0x400>; /* pci bridge */ + }; + }; +}; diff --git a/target/linux/lantiq/image/vr9.dtsi b/target/linux/lantiq/image/vr9.dtsi new file mode 100644 index 0000000000..f82faad17a --- /dev/null +++ b/target/linux/lantiq/image/vr9.dtsi @@ -0,0 +1,115 @@ +/ { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,xway", "lantiq,vr9"; + + cpus { + cpu@0 { + compatible = "mips,mips34Kc"; + }; + }; + + biu@1F800000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,biu", "simple-bus"; + reg = <0x1F800000 0x800000>; + ranges = <0x0 0x1F800000 0x7FFFFF>; + + icu0: icu@80200 { + #interrupt-cells = <1>; + interrupt-controller; + compatible = "lantiq,icu"; + reg = <0x80200 0x28 + 0x80228 0x28 + 0x80250 0x28 + 0x80278 0x28 + 0x802a0 0x28>; + }; + + watchdog@803F0 { + compatible = "lantiq,wdt"; + reg = <0x803F0 0x10>; + }; + }; + + sram@1F000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,sram"; + reg = <0x1F000000 0x800000>; + ranges = <0x0 0x1F000000 0x7FFFFF>; + + eiu0: eiu@101000 { + #interrupt-cells = <1>; + interrupt-controller; + interrupt-parent; + compatible = "lantiq,eiu-xway"; + reg = <0x101000 0x1000>; + }; + + pmu0: pmu@102000 { + compatible = "lantiq,pmu-xway"; + reg = <0x102000 0x1000>; + }; + + cgu0: cgu@103000 { + compatible = "lantiq,cgu-xway"; + reg = <0x103000 0x1000>; + #clock-cells = <1>; + }; + + rcu0: rcu@203000 { + compatible = "lantiq,rcu-xway"; + reg = <0x203000 0x1000>; + /* irq for thermal sensor */ + interrupt-parent = <&icu0>; + interrupts = <115>; + }; + }; + + fpi@10000000 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "lantiq,fpi", "simple-bus"; + ranges = <0x0 0x10000000 0xEEFFFFF>; + reg = <0x10000000 0xEF00000>; + + gptu@E100A00 { + compatible = "lantiq,gptu-xway"; + reg = <0xE100A00 0x100>; + interrupt-parent = <&icu0>; + interrupts = <126 127 128 129 130 131>; + }; + + asc1: serial@E100C00 { + compatible = "lantiq,asc"; + reg = <0xE100C00 0x400>; + interrupt-parent = <&icu0>; + interrupts = <112 113 114>; + }; + + dma0: dma@E104100 { + compatible = "lantiq,dma-xway"; + reg = <0xE104100 0x800>; + }; + + ebu0: ebu@E105300 { + compatible = "lantiq,ebu-xway"; + reg = <0xE105300 0x100>; + }; + + pci0: pci@E105400 { + #address-cells = <3>; + #size-cells = <2>; + #interrupt-cells = <1>; + compatible = "lantiq,pci-xway"; + bus-range = <0x0 0x0>; + ranges = <0x2000000 0 0x8000000 0x8000000 0 0x2000000 /* pci memory */ + 0x1000000 0 0x00000000 0xAE00000 0 0x200000>; /* io space */ + reg = <0x7000000 0x8000 /* config space */ + 0xE105400 0x400>; /* pci bridge */ + }; + + }; +};