From: Mathias Kresin <dev@kresin.me>
Date: Thu, 3 Aug 2017 19:11:57 +0000 (+0200)
Subject: ltq-xdsl-app: drop esi call
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a94555ce2454f69845bfc194245dbf0e71704cb3;p=openwrt%2Fstaging%2Fansuel.git

ltq-xdsl-app: drop esi call

The esi call was added to workaround a race condition between applying
a configured mac address to the wan interface and starting the protocol
(handler) as it was observed in a DHCP over ATM bridge configuration.

Martin Schiller, TDT GmbH was so kind to test with their local
infrastructure if the race condition still exists. The provided package
dumps captured behind the DSLAM shows that it doesn't. It was most
likely fixed with adding carrier support to the lantiq ptm/atm driver.

Signed-off-by: Mathias Kresin <dev@kresin.me>
---

diff --git a/package/network/config/ltq-adsl-app/files/dsl_control b/package/network/config/ltq-adsl-app/files/dsl_control
index dcde6b2338..8218186ef8 100644
--- a/package/network/config/ltq-adsl-app/files/dsl_control
+++ b/package/network/config/ltq-adsl-app/files/dsl_control
@@ -45,8 +45,6 @@ start() {
 		return 1
 	}
 
-	esi $(printf '%012X' $((1+0x$(tr -d : </sys/class/net/eth0/address))))
-
 	service_start /sbin/dsl_cpe_control -i${xtu} \
 			-n /sbin/dsl_notify.sh \
 			-f ${firmware}
diff --git a/package/network/config/ltq-vdsl-app/Makefile b/package/network/config/ltq-vdsl-app/Makefile
index 1ddb83a0af..815f89c0b8 100644
--- a/package/network/config/ltq-vdsl-app/Makefile
+++ b/package/network/config/ltq-vdsl-app/Makefile
@@ -28,7 +28,7 @@ define Package/ltq-vdsl-app
   CATEGORY:=Network
   TITLE:=Lantiq VDSL userland tool
   URL:=http://www.lantiq.com/
-  DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt +atm-esi
+  DEPENDS:=@TARGET_lantiq_xrx200 +libpthread +librt
 endef
 
 define Package/ltq-vdsl-app/description
diff --git a/package/network/config/ltq-vdsl-app/files/vdsl_cpe_control_wrapper b/package/network/config/ltq-vdsl-app/files/vdsl_cpe_control_wrapper
index cc127f7779..8e7c1cb4b8 100644
--- a/package/network/config/ltq-vdsl-app/files/vdsl_cpe_control_wrapper
+++ b/package/network/config/ltq-vdsl-app/files/vdsl_cpe_control_wrapper
@@ -7,5 +7,4 @@ for mod in $LOAD; do
 	grep -q "$mod " /proc/modules || insmod "$mod"
 done
 
-esi $(printf '%012X' $((1+0x$(tr -d : </sys/class/net/eth0/address))))
 exec /sbin/vdsl_cpe_control "$@"