From: Hauke Mehrtens Date: Tue, 22 Aug 2017 21:59:48 +0000 (+0200) Subject: mac80211: update to backports-4.14-rc2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a8f63a0717f553e0a1b37ee9212fc4cb2a801426;p=openwrt%2Fstaging%2Fynezz.git mac80211: update to backports-4.14-rc2 This updates mac80211 to backprots-4.14-rc2. This was compile and runtime tested with ath9k, ath10k and b43 with multiple stations and ieee80211w and in different scenarios by many other people. To create the backports-4.14-rc2-1.tar.xz use this repository: https://git.kernel.org/pub/scm/linux/kernel/git/backports/backports.git from tag v4.14-rc2-1 Then run this: ./gentree.py --git-revision v4.14-rc2 --clean ../backports-4.14-rc2-1 This also adapts the ath10k-ct and mt76 driver to the changed cfg80211 APIs and syncs the nl80211.h file in iw with the new version from backports-4.14-rc2. Signed-off-by: Hauke Mehrtens --- diff --git a/package/kernel/ath10k-ct/patches/100-kernel_compat.patch b/package/kernel/ath10k-ct/patches/100-kernel_compat.patch index 5d363a0e43..58d6b54c55 100644 --- a/package/kernel/ath10k-ct/patches/100-kernel_compat.patch +++ b/package/kernel/ath10k-ct/patches/100-kernel_compat.patch @@ -17,7 +17,7 @@ firmware = ar->normal_mode_fw.fw_file.firmware; if (firmware) -@@ -3397,7 +3397,7 @@ int ath10k_debug_register(struct ath10k +@@ -3413,7 +3413,7 @@ int ath10k_debug_register(struct ath10k debugfs_create_file("nf_cal_period", S_IRUSR | S_IWUSR, ar->debug.debugfs_phy, ar, &fops_nf_cal_period); @@ -28,7 +28,7 @@ &fops_simulate_radar); --- a/ath10k/mac.c +++ b/ath10k/mac.c -@@ -3556,7 +3556,7 @@ static void ath10k_regd_update(struct at +@@ -3596,7 +3596,7 @@ static void ath10k_regd_update(struct at regpair = ar->ath_common.regulatory.regpair; @@ -37,7 +37,7 @@ nl_dfs_reg = ar->dfs_detector->region; wmi_dfs_reg = ath10k_mac_get_dfs_region(nl_dfs_reg); ath10k_dbg(ar, ATH10K_DBG_REGULATORY, -@@ -3590,7 +3590,7 @@ static void ath10k_reg_notifier(struct w +@@ -3630,7 +3630,7 @@ static void ath10k_reg_notifier(struct w ath_reg_notifier_apply(wiphy, request, &ar->ath_common.regulatory); @@ -46,7 +46,7 @@ ath10k_dbg(ar, ATH10K_DBG_REGULATORY, "reg-notifier: dfs region 0x%x\n", request->dfs_region); result = ar->dfs_detector->set_dfs_domain(ar->dfs_detector, -@@ -8863,7 +8863,7 @@ int ath10k_mac_register(struct ath10k *a +@@ -8925,7 +8925,7 @@ int ath10k_mac_register(struct ath10k *a if (!test_bit(ATH10K_FLAG_RAW_MODE, &ar->dev_flags)) ar->hw->netdev_features = NETIF_F_HW_CSUM; @@ -55,7 +55,7 @@ /* Init ath dfs pattern detector */ ar->ath_common.debug_mask = ATH_DBG_DFS; ar->dfs_detector = dfs_pattern_detector_init(&ar->ath_common, -@@ -8908,7 +8908,7 @@ err_unregister: +@@ -8970,7 +8970,7 @@ err_unregister: ieee80211_unregister_hw(ar->hw); err_dfs_detector_exit: @@ -64,7 +64,7 @@ ar->dfs_detector->exit(ar->dfs_detector); err_free: -@@ -8923,7 +8923,7 @@ void ath10k_mac_unregister(struct ath10k +@@ -8985,7 +8985,7 @@ void ath10k_mac_unregister(struct ath10k { ieee80211_unregister_hw(ar->hw); @@ -86,7 +86,7 @@ hwmon_dev = devm_hwmon_device_register_with_groups(ar->dev, --- a/ath10k/wmi.c +++ b/ath10k/wmi.c -@@ -3788,7 +3788,7 @@ void ath10k_wmi_event_dfs(struct ath10k +@@ -3883,7 +3883,7 @@ void ath10k_wmi_event_dfs(struct ath10k phyerr->tsf_timestamp, tsf, buf_len); /* Skip event if DFS disabled */ diff --git a/package/kernel/ath10k-ct/patches/110-api_fix.patch b/package/kernel/ath10k-ct/patches/110-api_fix.patch index 4c210369fe..5f7de4a955 100644 --- a/package/kernel/ath10k-ct/patches/110-api_fix.patch +++ b/package/kernel/ath10k-ct/patches/110-api_fix.patch @@ -1,6 +1,6 @@ --- a/ath10k/htt_rx.c +++ b/ath10k/htt_rx.c -@@ -2490,7 +2490,7 @@ bool ath10k_htt_t2h_msg_handler(struct a +@@ -2497,7 +2497,7 @@ bool ath10k_htt_t2h_msg_handler(struct a u32 freq = __le32_to_cpu(resp->chan_change.freq); ar->tgt_oper_chan = diff --git a/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch b/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch new file mode 100644 index 0000000000..032a0bcb7d --- /dev/null +++ b/package/kernel/ath10k-ct/patches/120-mac80211-4-14-api.patch @@ -0,0 +1,104 @@ +--- a/ath10k/htt_rx.c ++++ b/ath10k/htt_rx.c +@@ -642,11 +642,11 @@ static void ath10k_htt_rx_h_rates(struct + sgi = (info3 >> 7) & 1; + + status->rate_idx = mcs; +- status->flag |= RX_FLAG_HT; ++ status->encoding = RX_ENC_HT; + if (sgi) +- status->flag |= RX_FLAG_SHORT_GI; ++ status->enc_flags |= RX_ENC_FLAG_SHORT_GI; + if (bw) +- status->flag |= RX_FLAG_40MHZ; ++ status->bw = RATE_INFO_BW_40; + break; + case HTT_RX_VHT: + case HTT_RX_VHT_WITH_TXBF: +@@ -698,10 +698,10 @@ static void ath10k_htt_rx_h_rates(struct + } + + status->rate_idx = mcs; +- status->vht_nss = nss; ++ status->nss = nss; + + if (sgi) +- status->flag |= RX_FLAG_SHORT_GI; ++ status->enc_flags |= RX_ENC_FLAG_SHORT_GI; + + switch (bw) { + /* 20MHZ */ +@@ -709,18 +709,18 @@ static void ath10k_htt_rx_h_rates(struct + break; + /* 40MHZ */ + case 1: +- status->flag |= RX_FLAG_40MHZ; ++ status->bw = RATE_INFO_BW_40; + break; + /* 80MHZ */ + case 2: +- status->vht_flag |= RX_VHT_FLAG_80MHZ; ++ status->bw = RATE_INFO_BW_80; + break; + case 3: +- status->vht_flag |= RX_VHT_FLAG_160MHZ; ++ status->bw = RATE_INFO_BW_160; + break; + } + +- status->flag |= RX_FLAG_VHT; ++ status->encoding = RX_ENC_VHT; + break; + default: + break; +@@ -883,13 +883,10 @@ static void ath10k_htt_rx_h_ppdu(struct + /* New PPDU starts so clear out the old per-PPDU status. */ + status->freq = 0; + status->rate_idx = 0; +- status->vht_nss = 0; +- status->vht_flag &= ~RX_VHT_FLAG_80MHZ; +- status->flag &= ~(RX_FLAG_HT | +- RX_FLAG_VHT | +- RX_FLAG_SHORT_GI | +- RX_FLAG_40MHZ | +- RX_FLAG_MACTIME_END); ++ status->nss = 0; ++ status->encoding = RX_ENC_LEGACY; ++ status->bw = RATE_INFO_BW_20; ++ status->flag &= ~RX_FLAG_MACTIME_END; + status->flag |= RX_FLAG_NO_SIGNAL_VAL; + + ath10k_htt_rx_h_signal(ar, status, rxd); +@@ -942,7 +939,7 @@ static void ath10k_process_rx(struct ath + *status = *rx_status; + + ath10k_dbg(ar, ATH10K_DBG_DATA, +- "rx skb %p len %u peer %pM %s %s sn %u %s%s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%llx fcs-err %i mic-err %i amsdu-more %i\n", ++ "rx skb %p len %u peer %pM %s %s sn %u %s%s%s%s%s%s %srate_idx %u vht_nss %u freq %u band %u flag 0x%x fcs-err %i mic-err %i amsdu-more %i\n", + skb, + skb->len, + ieee80211_get_SA(hdr), +@@ -950,15 +947,15 @@ static void ath10k_process_rx(struct ath + is_multicast_ether_addr(ieee80211_get_DA(hdr)) ? + "mcast" : "ucast", + (__le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4, +- status->flag == 0 ? "legacy" : "", +- status->flag & RX_FLAG_HT ? "ht" : "", +- status->flag & RX_FLAG_VHT ? "vht" : "", +- status->flag & RX_FLAG_40MHZ ? "40" : "", +- status->vht_flag & RX_VHT_FLAG_80MHZ ? "80" : "", +- status->vht_flag & RX_VHT_FLAG_160MHZ ? "160" : "", +- status->flag & RX_FLAG_SHORT_GI ? "sgi " : "", ++ (status->encoding == RX_ENC_LEGACY) ? "legacy" : "", ++ (status->encoding == RX_ENC_HT) ? "ht" : "", ++ (status->encoding == RX_ENC_VHT) ? "vht" : "", ++ (status->bw == RATE_INFO_BW_40) ? "40" : "", ++ (status->bw == RATE_INFO_BW_80) ? "80" : "", ++ (status->bw == RATE_INFO_BW_160) ? "160" : "", ++ status->enc_flags & RX_ENC_FLAG_SHORT_GI ? "sgi " : "", + status->rate_idx, +- status->vht_nss, ++ status->nss, + status->freq, + status->band, status->flag, + !!(status->flag & RX_FLAG_FAILED_FCS_CRC), diff --git a/package/kernel/mac80211/Makefile b/package/kernel/mac80211/Makefile index dfe9781be2..16f5a06963 100644 --- a/package/kernel/mac80211/Makefile +++ b/package/kernel/mac80211/Makefile @@ -10,14 +10,14 @@ include $(INCLUDE_DIR)/kernel.mk PKG_NAME:=mac80211 -PKG_VERSION:=2017-01-31 -PKG_RELEASE:=3 -PKG_SOURCE_URL:=http://mirror2.openwrt.org/sources -PKG_BACKPORT_VERSION:= -PKG_HASH:=75e6d39e34cf156212a2509172a4a62b673b69eb4a1d9aaa565f7fa719fa2317 - -PKG_SOURCE:=compat-wireless-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.xz -PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/compat-wireless-$(PKG_VERSION) +PKG_VERSION:=4.14-rc2 +PKG_RELEASE:=1 +PKG_SOURCE_URL:=@KERNEL/linux/kernel/projects/backports/stable/v$(PKG_VERSION)/ +PKG_BACKPORT_VERSION:=-1 +PKG_HASH:=8d1b62e0ea6cc2ffa7e6ae666da201360256e9b74ae651a31842d33625367524 + +PKG_SOURCE:=backports-$(PKG_VERSION)$(PKG_BACKPORT_VERSION).tar.xz +PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/backports-$(PKG_VERSION)$(PKG_BACKPORT_VERSION) PKG_BUILD_PARALLEL:=1 PKG_MAINTAINER:=Felix Fietkau @@ -101,7 +101,8 @@ endef define KernelPackage/mac80211 $(call KernelPackage/mac80211/Default) TITLE:=Linux 802.11 Wireless Networking Stack - DEPENDS+= +kmod-cfg80211 +hostapd-common + # +kmod-crypto-cmac is a runtime only dependency of net/mac80211/aes_cmac.c + DEPENDS+= +kmod-cfg80211 +kmod-crypto-hash +kmod-crypto-cmac +hostapd-common KCONFIG:=\ CONFIG_AVERAGE=y FILES:= $(PKG_BUILD_DIR)/net/mac80211/mac80211.ko @@ -929,7 +930,7 @@ endef define KernelPackage/libipw $(call KernelPackage/mac80211/Default) TITLE:=libipw for ipw2100 and ipw2200 - DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN + DEPENDS:=@PCI_SUPPORT +kmod-crypto-michael-mic +kmod-crypto-ecb +kmod-lib80211 +kmod-cfg80211 +@DRIVER_WEXT_SUPPORT @!BIG_ENDIAN @!LINUX_3_18 FILES:=$(PKG_BUILD_DIR)/drivers/net/wireless/intel/ipw2x00/libipw.ko AUTOLOAD:=$(call AutoProbe,libipw) endef @@ -989,7 +990,7 @@ endef define KernelPackage/libertas-usb $(call KernelPackage/mac80211/Default) - DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-usb-firmware + DEPENDS+= @USB_SUPPORT +kmod-cfg80211 +kmod-usb-core +kmod-lib80211 +@DRIVER_WEXT_SUPPORT +libertas-usb-firmware @!LINUX_3_18 TITLE:=Marvell 88W8015 Wireless Driver FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ @@ -999,7 +1000,7 @@ endef define KernelPackage/libertas-sdio $(call KernelPackage/mac80211/Default) - DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware + DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +kmod-mmc +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-sdio-firmware @!LINUX_3_18 TITLE:=Marvell 88W8686 Wireless Driver FILES:= \ $(PKG_BUILD_DIR)/drivers/net/wireless/marvell/libertas/libertas.ko \ @@ -1010,7 +1011,7 @@ endef define KernelPackage/libertas-spi $(call KernelPackage/mac80211/Default) SUBMENU:=Wireless Drivers - DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-spi-firmware + DEPENDS+= +kmod-cfg80211 +kmod-lib80211 +@DRIVER_WEXT_SUPPORT @!TARGET_uml +libertas-spi-firmware @!LINUX_3_18 KCONFIG := \ CONFIG_SPI=y \ CONFIG_SPI_MASTER=y diff --git a/package/kernel/mac80211/patches/001-fix_build.patch b/package/kernel/mac80211/patches/001-fix_build.patch index 402649d2cc..9e272e90af 100644 --- a/package/kernel/mac80211/patches/001-fix_build.patch +++ b/package/kernel/mac80211/patches/001-fix_build.patch @@ -24,7 +24,7 @@ -.DEFAULT: +.SILENT: $(STAMP_KERNEL_CONFIG) +$(STAMP_KERNEL_CONFIG): - @set -e ; test -f .local-symbols || ( \ + @set -e ; test -f local-symbols || ( \ echo "/--------------" ;\ echo "| You shouldn't run make in the backports tree, but only in" ;\ @@ -60,57 +62,61 @@ mrproper: @@ -34,7 +34,7 @@ - @set -e ; if [ "$$(cat .kernel_config_md5 2>/dev/null)" != "$(CONFIG_MD5)" ] ;\ - then \ - echo -n "Generating local configuration database from kernel ..." ;\ -- grep -v -f .local-symbols $(KERNEL_CONFIG) | grep = | ( \ +- grep -v -f local-symbols $(KERNEL_CONFIG) | grep = | ( \ - while read l ; do \ - if [ "$${l:0:7}" != "CONFIG_" ] ; then \ - continue ;\ @@ -85,9 +85,9 @@ + @rm -f .kernel_config_md5_* + @touch $@ + -+Kconfig.kernel: $(STAMP_KERNEL_CONFIG) .local-symbols ++Kconfig.kernel: $(STAMP_KERNEL_CONFIG) local-symbols + @printf "Generating local configuration database from kernel ..." -+ @grep -v -f .local-symbols $(KERNEL_CONFIG) | grep = | ( \ ++ @grep -v -f local-symbols $(KERNEL_CONFIG) | grep = | ( \ + while read l ; do \ + if [ "$${l:0:7}" != "CONFIG_" ] ; then \ + continue ;\ @@ -148,7 +148,7 @@ @$(MAKE) oldconfig - @echo -n "Building backport-include/backport/autoconf.h ..." + @printf "Building backport-include/backport/autoconf.h ..." - @grep -f .local-symbols .config | ( \ + @grep -f local-symbols .config | ( \ echo "#ifndef COMPAT_AUTOCONF_INCLUDED" ;\ echo "#define COMPAT_AUTOCONF_INCLUDED" ;\ @@ -80,7 +80,12 @@ backport-include/backport/autoconf.h: .c diff --git a/package/kernel/mac80211/patches/002-change_allconfig.patch b/package/kernel/mac80211/patches/002-change_allconfig.patch index a071ae6370..bd5bebfa45 100644 --- a/package/kernel/mac80211/patches/002-change_allconfig.patch +++ b/package/kernel/mac80211/patches/002-change_allconfig.patch @@ -1,6 +1,6 @@ --- a/kconf/conf.c +++ b/kconf/conf.c -@@ -594,40 +594,12 @@ int main(int ac, char **av) +@@ -593,40 +593,12 @@ int main(int ac, char **av) case oldconfig: case listnewconfig: case olddefconfig: @@ -44,7 +44,7 @@ break; --- a/kconf/confdata.c +++ b/kconf/confdata.c -@@ -1170,6 +1170,8 @@ bool conf_set_all_new_symbols(enum conf_ +@@ -1169,6 +1169,8 @@ bool conf_set_all_new_symbols(enum conf_ } bool has_changed = false; @@ -53,7 +53,7 @@ for_all_symbols(i, sym) { if (sym_has_value(sym) || (sym->flags & SYMBOL_VALID)) continue; -@@ -1213,8 +1215,6 @@ bool conf_set_all_new_symbols(enum conf_ +@@ -1212,8 +1214,6 @@ bool conf_set_all_new_symbols(enum conf_ } diff --git a/package/kernel/mac80211/patches/004-kconfig_backport_fix.patch b/package/kernel/mac80211/patches/004-kconfig_backport_fix.patch index f11029844c..2c9572ec93 100644 --- a/package/kernel/mac80211/patches/004-kconfig_backport_fix.patch +++ b/package/kernel/mac80211/patches/004-kconfig_backport_fix.patch @@ -17,7 +17,7 @@ #undef IS_ENABLED #define IS_ENABLED(option) \ (config_enabled(option) || config_enabled(option##_MODULE)) -@@ -24,6 +27,8 @@ +@@ -31,6 +34,8 @@ #undef IS_BUILTIN #define IS_BUILTIN(option) config_enabled(option) diff --git a/package/kernel/mac80211/patches/005-revert-devcoredump.patch b/package/kernel/mac80211/patches/005-revert-devcoredump.patch index ff460900ff..1216b99574 100644 --- a/package/kernel/mac80211/patches/005-revert-devcoredump.patch +++ b/package/kernel/mac80211/patches/005-revert-devcoredump.patch @@ -1,6 +1,6 @@ --- a/compat/Makefile +++ b/compat/Makefile -@@ -35,8 +35,6 @@ compat-$(CPTCFG_KERNEL_4_6) += backport- +@@ -39,8 +39,6 @@ compat-$(CPTCFG_KERNEL_4_10) += backport compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o compat-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += crypto-skcipher.o @@ -9,144 +9,3 @@ compat-$(CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP) += drivers-base-devcoredump.o compat-$(CPTCFG_BPAUTO_RHASHTABLE) += lib-rhashtable.o cordic-objs += lib-cordic.o ---- a/compat/drivers-base-devcoredump.c -+++ b/compat/drivers-base-devcoredump.c -@@ -31,6 +31,7 @@ - #include - #include - #include -+#include "backports.h" - - static struct class devcd_class; - -@@ -40,6 +41,10 @@ static bool devcd_disabled; - /* if data isn't read by userspace after 5 minutes then delete it */ - #define DEVCD_TIMEOUT (HZ * 60 * 5) - -+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0) -+static struct bin_attribute devcd_attr_data; -+#endif -+ - struct devcd_entry { - struct device devcd_dev; - void *data; -@@ -69,8 +74,7 @@ static void devcd_dev_release(struct dev - * a struct device to know when it goes away? - */ - if (devcd->failing_dev->kobj.sd) -- sysfs_delete_link(&devcd->failing_dev->kobj, &dev->kobj, -- "devcoredump"); -+ sysfs_remove_link(&devcd->failing_dev->kobj, "devcoredump"); - - put_device(devcd->failing_dev); - kfree(devcd); -@@ -82,6 +86,9 @@ static void devcd_del(struct work_struct - - devcd = container_of(wk, struct devcd_entry, del_wk.work); - -+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0) -+ device_remove_bin_file(&devcd->devcd_dev, &devcd_attr_data); -+#endif - device_del(&devcd->devcd_dev); - put_device(&devcd->devcd_dev); - } -@@ -115,6 +122,7 @@ static struct bin_attribute devcd_attr_d - .write = devcd_data_write, - }; - -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0) - static struct bin_attribute *devcd_dev_bin_attrs[] = { - &devcd_attr_data, NULL, - }; -@@ -126,6 +134,7 @@ static const struct attribute_group devc - static const struct attribute_group *devcd_dev_groups[] = { - &devcd_dev_group, NULL, - }; -+#endif /* LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0) */ - - static int devcd_free(struct device *dev, void *data) - { -@@ -160,18 +169,11 @@ static ssize_t disabled_store(struct cla - - return count; - } --static CLASS_ATTR_RW(disabled); - --static struct attribute *devcd_class_attrs[] = { -- &class_attr_disabled.attr, -- NULL, -+static struct class_attribute devcd_class_attrs[] = { -+ __ATTR_RW(disabled), -+ __ATTR_NULL - }; --#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0) --ATTRIBUTE_GROUPS(devcd_class); --#else --#define BP_ATTR_GRP_STRUCT device_attribute --ATTRIBUTE_GROUPS_BACKPORT(devcd_class); --#endif - - static struct class devcd_class = { - .name = "devcoredump", -@@ -179,10 +181,8 @@ static struct class devcd_class = { - .dev_release = devcd_dev_release, - #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,11,0) - .dev_groups = devcd_dev_groups, --#else -- .dev_attrs = devcd_class_dev_attrs, - #endif -- .class_groups = devcd_class_groups, -+ .class_attrs = devcd_class_attrs, - }; - - static ssize_t devcd_readv(char *buffer, loff_t offset, size_t count, -@@ -325,6 +325,11 @@ void dev_coredumpm(struct device *dev, s - if (device_add(&devcd->devcd_dev)) - goto put_device; - -+#if LINUX_VERSION_CODE < KERNEL_VERSION(3,11,0) -+ if (device_create_bin_file(&devcd->devcd_dev, &devcd_attr_data)) -+ goto put_device; -+#endif -+ - if (sysfs_create_link(&devcd->devcd_dev.kobj, &dev->kobj, - "failing_device")) - /* nothing - symlink will be missing */; -@@ -367,16 +372,13 @@ void dev_coredumpsg(struct device *dev, - } - EXPORT_SYMBOL_GPL(dev_coredumpsg); - --static int __init devcoredump_init(void) -+int __init devcoredump_init(void) - { -- init_devcd_class_attrs(); - return class_register(&devcd_class); - } --__initcall(devcoredump_init); - --static void __exit devcoredump_exit(void) -+void __exit devcoredump_exit(void) - { - class_for_each_device(&devcd_class, NULL, NULL, devcd_free); - class_unregister(&devcd_class); - } --__exitcall(devcoredump_exit); ---- a/include/linux/backport-devcoredump.h -+++ b/include/linux/backport-devcoredump.h -@@ -66,7 +66,7 @@ static inline void _devcd_free_sgtable(s - } - - --#ifdef CONFIG_DEV_COREDUMP -+#ifdef CPTCFG_BPAUTO_WANT_DEV_COREDUMP - void dev_coredumpv(struct device *dev, void *data, size_t datalen, - gfp_t gfp); - -@@ -100,6 +100,6 @@ static inline void dev_coredumpsg(struct - { - _devcd_free_sgtable(table); - } --#endif /* CONFIG_DEV_COREDUMP */ -+#endif /* CPTCFG_BPAUTO_WANT_DEV_COREDUMP */ - - #endif /* __DEVCOREDUMP_H */ diff --git a/package/kernel/mac80211/patches/006-revert-ktime-changes.patch b/package/kernel/mac80211/patches/006-revert-ktime-changes.patch deleted file mode 100644 index b839eb4c8d..0000000000 --- a/package/kernel/mac80211/patches/006-revert-ktime-changes.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c -@@ -177,7 +177,7 @@ static bool rt2800usb_tx_sta_fifo_read_c - if (rt2800usb_txstatus_pending(rt2x00dev)) { - /* Read register after 1 ms */ - hrtimer_start(&rt2x00dev->txstatus_timer, -- TXSTATUS_READ_INTERVAL, -+ ktime_set(0, TXSTATUS_READ_INTERVAL), - HRTIMER_MODE_REL); - return false; - } -@@ -204,7 +204,7 @@ static void rt2800usb_async_read_tx_stat - - /* Read TX_STA_FIFO register after 2 ms */ - hrtimer_start(&rt2x00dev->txstatus_timer, -- 2 * TXSTATUS_READ_INTERVAL, -+ ktime_set(0, 2*TXSTATUS_READ_INTERVAL), - HRTIMER_MODE_REL); - } - diff --git a/package/kernel/mac80211/patches/007-revert-genetlink-changes.patch b/package/kernel/mac80211/patches/007-revert-genetlink-changes.patch deleted file mode 100644 index 1a85106bc2..0000000000 --- a/package/kernel/mac80211/patches/007-revert-genetlink-changes.patch +++ /dev/null @@ -1,266 +0,0 @@ ---- a/net/wireless/nl80211.c -+++ b/net/wireless/nl80211.c -@@ -32,8 +32,22 @@ static int nl80211_crypto_settings(struc - struct cfg80211_crypto_settings *settings, - int cipher_limit); - -+static int nl80211_pre_doit(const struct genl_ops *ops, struct sk_buff *skb, -+ struct genl_info *info); -+static void nl80211_post_doit(const struct genl_ops *ops, struct sk_buff *skb, -+ struct genl_info *info); -+ - /* the netlink family */ --static struct genl_family nl80211_fam; -+static struct genl_family nl80211_fam = { -+ .id = GENL_ID_GENERATE, /* don't bother with a hardcoded ID */ -+ .name = NL80211_GENL_NAME, /* have users key off the name instead */ -+ .hdrsize = 0, /* no private header */ -+ .version = 1, /* no particular meaning now */ -+ .maxattr = NL80211_ATTR_MAX, -+ .netnsok = true, -+ .pre_doit = nl80211_pre_doit, -+ .post_doit = nl80211_post_doit, -+}; - - /* multicast groups */ - enum nl80211_multicast_groups { -@@ -549,14 +563,13 @@ static int nl80211_prepare_wdev_dump(str - - if (!cb->args[0]) { - err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, -- genl_family_attrbuf(&nl80211_fam), -- nl80211_fam.maxattr, nl80211_policy); -+ nl80211_fam.attrbuf, nl80211_fam.maxattr, -+ nl80211_policy); - if (err) - goto out_unlock; - -- *wdev = __cfg80211_wdev_from_attrs( -- sock_net(skb->sk), -- genl_family_attrbuf(&nl80211_fam)); -+ *wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk), -+ nl80211_fam.attrbuf); - if (IS_ERR(*wdev)) { - err = PTR_ERR(*wdev); - goto out_unlock; -@@ -1903,7 +1916,7 @@ static int nl80211_dump_wiphy_parse(stru - struct netlink_callback *cb, - struct nl80211_dump_wiphy_state *state) - { -- struct nlattr **tb = genl_family_attrbuf(&nl80211_fam); -+ struct nlattr **tb = nl80211_fam.attrbuf; - int ret = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, - tb, nl80211_fam.maxattr, nl80211_policy); - /* ignore parse errors for backward compatibility */ -@@ -7733,7 +7746,6 @@ static int nl80211_send_survey(struct sk - - static int nl80211_dump_survey(struct sk_buff *skb, struct netlink_callback *cb) - { -- struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam); - struct survey_info survey; - struct cfg80211_registered_device *rdev; - struct wireless_dev *wdev; -@@ -7746,7 +7758,7 @@ static int nl80211_dump_survey(struct sk - return res; - - /* prepare_wdev_dump parsed the attributes */ -- radio_stats = attrbuf[NL80211_ATTR_SURVEY_RADIO_STATS]; -+ radio_stats = nl80211_fam.attrbuf[NL80211_ATTR_SURVEY_RADIO_STATS]; - - if (!wdev->netdev) { - res = -EINVAL; -@@ -8594,14 +8606,14 @@ static int nl80211_testmode_dump(struct - */ - phy_idx = cb->args[0] - 1; - } else { -- struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam); -- - err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, -- attrbuf, nl80211_fam.maxattr, nl80211_policy); -+ nl80211_fam.attrbuf, nl80211_fam.maxattr, -+ nl80211_policy); - if (err) - goto out_err; - -- rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf); -+ rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), -+ nl80211_fam.attrbuf); - if (IS_ERR(rdev)) { - err = PTR_ERR(rdev); - goto out_err; -@@ -8609,8 +8621,9 @@ static int nl80211_testmode_dump(struct - phy_idx = rdev->wiphy_idx; - rdev = NULL; - -- if (attrbuf[NL80211_ATTR_TESTDATA]) -- cb->args[1] = (long)attrbuf[NL80211_ATTR_TESTDATA]; -+ if (nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA]) -+ cb->args[1] = -+ (long)nl80211_fam.attrbuf[NL80211_ATTR_TESTDATA]; - } - - if (cb->args[1]) { -@@ -10814,7 +10827,8 @@ static int handle_nan_filter(struct nlat - - i = 0; - nla_for_each_nested(attr, attr_filter, rem) { -- filter[i].filter = nla_memdup(attr, GFP_KERNEL); -+ filter[i].filter = kmemdup(nla_data(attr), nla_len(attr), -+ GFP_KERNEL); - filter[i].len = nla_len(attr); - i++; - } -@@ -11450,7 +11464,6 @@ static int nl80211_prepare_vendor_dump(s - struct cfg80211_registered_device **rdev, - struct wireless_dev **wdev) - { -- struct nlattr **attrbuf = genl_family_attrbuf(&nl80211_fam); - u32 vid, subcmd; - unsigned int i; - int vcmd_idx = -1; -@@ -11486,28 +11499,31 @@ static int nl80211_prepare_vendor_dump(s - } - - err = nlmsg_parse(cb->nlh, GENL_HDRLEN + nl80211_fam.hdrsize, -- attrbuf, nl80211_fam.maxattr, nl80211_policy); -+ nl80211_fam.attrbuf, nl80211_fam.maxattr, -+ nl80211_policy); - if (err) - goto out_unlock; - -- if (!attrbuf[NL80211_ATTR_VENDOR_ID] || -- !attrbuf[NL80211_ATTR_VENDOR_SUBCMD]) { -+ if (!nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_ID] || -+ !nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_SUBCMD]) { - err = -EINVAL; - goto out_unlock; - } - -- *wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk), attrbuf); -+ *wdev = __cfg80211_wdev_from_attrs(sock_net(skb->sk), -+ nl80211_fam.attrbuf); - if (IS_ERR(*wdev)) - *wdev = NULL; - -- *rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), attrbuf); -+ *rdev = __cfg80211_rdev_from_attrs(sock_net(skb->sk), -+ nl80211_fam.attrbuf); - if (IS_ERR(*rdev)) { - err = PTR_ERR(*rdev); - goto out_unlock; - } - -- vid = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_ID]); -- subcmd = nla_get_u32(attrbuf[NL80211_ATTR_VENDOR_SUBCMD]); -+ vid = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_ID]); -+ subcmd = nla_get_u32(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_SUBCMD]); - - for (i = 0; i < (*rdev)->wiphy.n_vendor_commands; i++) { - const struct wiphy_vendor_command *vcmd; -@@ -11531,9 +11547,9 @@ static int nl80211_prepare_vendor_dump(s - goto out_unlock; - } - -- if (attrbuf[NL80211_ATTR_VENDOR_DATA]) { -- data = nla_data(attrbuf[NL80211_ATTR_VENDOR_DATA]); -- data_len = nla_len(attrbuf[NL80211_ATTR_VENDOR_DATA]); -+ if (nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]) { -+ data = nla_data(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]); -+ data_len = nla_len(nl80211_fam.attrbuf[NL80211_ATTR_VENDOR_DATA]); - } - - /* 0 is the first index - add 1 to parse only once */ -@@ -12795,21 +12811,6 @@ static __genl_const struct genl_ops nl80 - }, - }; - --static struct genl_family nl80211_fam __ro_after_init = { -- .name = NL80211_GENL_NAME, /* have users key off the name instead */ -- .hdrsize = 0, /* no private header */ -- .version = 1, /* no particular meaning now */ -- .maxattr = NL80211_ATTR_MAX, -- .netnsok = true, -- .pre_doit = nl80211_pre_doit, -- .post_doit = nl80211_post_doit, -- .module = THIS_MODULE, -- .ops = nl80211_ops, -- .n_ops = ARRAY_SIZE(nl80211_ops), -- .mcgrps = nl80211_mcgrps, -- .n_mcgrps = ARRAY_SIZE(nl80211_mcgrps), --}; -- - /* notification functions */ - - void nl80211_notify_wiphy(struct cfg80211_registered_device *rdev, -@@ -14759,11 +14760,12 @@ void nl80211_send_ap_stopped(struct wire - - /* initialisation/exit functions */ - --int __init nl80211_init(void) -+int nl80211_init(void) - { - int err; - -- err = genl_register_family(&nl80211_fam); -+ err = genl_register_family_with_ops_groups(&nl80211_fam, nl80211_ops, -+ nl80211_mcgrps); - if (err) - return err; - ---- a/drivers/net/wireless/mac80211_hwsim.c -+++ b/drivers/net/wireless/mac80211_hwsim.c -@@ -587,8 +587,15 @@ struct hwsim_radiotap_ack_hdr { - __le16 rt_chbitmask; - } __packed; - --/* MAC80211_HWSIM netlink family */ --static struct genl_family hwsim_genl_family; -+/* MAC80211_HWSIM netlinf family */ -+static struct genl_family hwsim_genl_family = { -+ .id = GENL_ID_GENERATE, -+ .hdrsize = 0, -+ .name = "MAC80211_HWSIM", -+ .version = 1, -+ .maxattr = HWSIM_ATTR_MAX, -+ .netnsok = true, -+}; - - enum hwsim_multicast_groups { - HWSIM_MCGRP_CONFIG, -@@ -3250,18 +3257,6 @@ static __genl_const struct genl_ops hwsi - }, - }; - --static struct genl_family hwsim_genl_family __ro_after_init = { -- .name = "MAC80211_HWSIM", -- .version = 1, -- .maxattr = HWSIM_ATTR_MAX, -- .netnsok = true, -- .module = THIS_MODULE, -- .ops = hwsim_ops, -- .n_ops = ARRAY_SIZE(hwsim_ops), -- .mcgrps = hwsim_mcgrps, -- .n_mcgrps = ARRAY_SIZE(hwsim_mcgrps), --}; -- - static void destroy_radio(struct work_struct *work) - { - struct mac80211_hwsim_data *data = -@@ -3309,13 +3304,15 @@ static struct notifier_block hwsim_netli - .notifier_call = mac80211_hwsim_netlink_notify, - }; - --static int __init hwsim_init_netlink(void) -+static int hwsim_init_netlink(void) - { - int rc; - - printk(KERN_INFO "mac80211_hwsim: initializing netlink\n"); - -- rc = genl_register_family(&hwsim_genl_family); -+ rc = genl_register_family_with_ops_groups(&hwsim_genl_family, -+ hwsim_ops, -+ hwsim_mcgrps); - if (rc) - goto failure; - diff --git a/package/kernel/mac80211/patches/008-revert-ndo_stats64-cleanup.patch b/package/kernel/mac80211/patches/008-revert-ndo_stats64-cleanup.patch deleted file mode 100644 index 0f6f0f919f..0000000000 --- a/package/kernel/mac80211/patches/008-revert-ndo_stats64-cleanup.patch +++ /dev/null @@ -1,20 +0,0 @@ ---- a/net/mac80211/iface.c -+++ b/net/mac80211/iface.c -@@ -1133,7 +1133,7 @@ static u16 ieee80211_netdev_select_queue - return ieee80211_select_queue(IEEE80211_DEV_TO_SUB_IF(dev), skb); - } - --static void -+static struct rtnl_link_stats64 * - ieee80211_get_stats64(struct net_device *dev, struct rtnl_link_stats64 *stats) - { - int i; -@@ -1158,6 +1158,8 @@ ieee80211_get_stats64(struct net_device - stats->rx_bytes += rx_bytes; - stats->tx_bytes += tx_bytes; - } -+ -+ return stats; - } - - static const struct net_device_ops ieee80211_dataif_ops = { diff --git a/package/kernel/mac80211/patches/009-revert-mtu-changes.patch b/package/kernel/mac80211/patches/009-revert-mtu-changes.patch deleted file mode 100644 index f5e2757d3f..0000000000 --- a/package/kernel/mac80211/patches/009-revert-mtu-changes.patch +++ /dev/null @@ -1,338 +0,0 @@ ---- a/net/mac80211/iface.c -+++ b/net/mac80211/iface.c -@@ -151,6 +151,15 @@ void ieee80211_recalc_idle(struct ieee80 - ieee80211_hw_config(local, change); - } - -+static int ieee80211_change_mtu(struct net_device *dev, int new_mtu) -+{ -+ if (new_mtu < 256 || new_mtu > IEEE80211_MAX_DATA_LEN) -+ return -EINVAL; -+ -+ dev->mtu = new_mtu; -+ return 0; -+} -+ - static int ieee80211_verify_mac(struct ieee80211_sub_if_data *sdata, u8 *addr, - bool check_dup) - { -@@ -1168,6 +1177,7 @@ static const struct net_device_ops ieee8 - .ndo_uninit = ieee80211_uninit, - .ndo_start_xmit = ieee80211_subif_start_xmit, - .ndo_set_rx_mode = ieee80211_set_multicast_list, -+ .ndo_change_mtu = ieee80211_change_mtu, - .ndo_set_mac_address = ieee80211_change_mac, - .ndo_select_queue = ieee80211_netdev_select_queue, - .ndo_get_stats64 = ieee80211_get_stats64, -@@ -1211,6 +1221,7 @@ static const struct net_device_ops ieee8 - .ndo_uninit = ieee80211_uninit, - .ndo_start_xmit = ieee80211_monitor_start_xmit, - .ndo_set_rx_mode = ieee80211_set_multicast_list, -+ .ndo_change_mtu = ieee80211_change_mtu, - .ndo_set_mac_address = ieee80211_change_mac, - .ndo_select_queue = ieee80211_monitor_select_queue, - .ndo_get_stats64 = ieee80211_get_stats64, -@@ -1919,10 +1930,6 @@ int ieee80211_if_add(struct ieee80211_lo - - netdev_set_default_ethtool_ops(ndev, &ieee80211_ethtool_ops); - -- /* MTU range: 256 - 2304 */ -- ndev->min_mtu = 256; -- ndev->max_mtu = IEEE80211_MAX_DATA_LEN; -- - ret = register_netdevice(ndev); - if (ret) { - ieee80211_if_free(ndev); ---- a/drivers/net/wireless/ath/wil6210/netdev.c -+++ b/drivers/net/wireless/ath/wil6210/netdev.c -@@ -42,6 +42,21 @@ static int wil_stop(struct net_device *n - return wil_down(wil); - } - -+static int wil_change_mtu(struct net_device *ndev, int new_mtu) -+{ -+ struct wil6210_priv *wil = ndev_to_wil(ndev); -+ -+ if (new_mtu < 68 || new_mtu > mtu_max) { -+ wil_err(wil, "invalid MTU %d\n", new_mtu); -+ return -EINVAL; -+ } -+ -+ wil_dbg_misc(wil, "change MTU %d -> %d\n", ndev->mtu, new_mtu); -+ ndev->mtu = new_mtu; -+ -+ return 0; -+} -+ - static int wil_do_ioctl(struct net_device *ndev, struct ifreq *ifr, int cmd) - { - struct wil6210_priv *wil = ndev_to_wil(ndev); -@@ -55,6 +70,7 @@ static const struct net_device_ops wil_n - .ndo_start_xmit = wil_start_xmit, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, -+ .ndo_change_mtu = wil_change_mtu, - .ndo_do_ioctl = wil_do_ioctl, - }; - -@@ -111,7 +127,6 @@ static int wil6210_netdev_poll_tx(struct - static void wil_dev_setup(struct net_device *dev) - { - ether_setup(dev); -- dev->max_mtu = mtu_max; - dev->tx_queue_len = WIL_TX_Q_LEN_DEFAULT; - } - ---- a/drivers/net/wireless/atmel/atmel.c -+++ b/drivers/net/wireless/atmel/atmel.c -@@ -1295,6 +1295,14 @@ static struct iw_statistics *atmel_get_w - return &priv->wstats; - } - -+static int atmel_change_mtu(struct net_device *dev, int new_mtu) -+{ -+ if ((new_mtu < 68) || (new_mtu > 2312)) -+ return -EINVAL; -+ dev->mtu = new_mtu; -+ return 0; -+} -+ - static int atmel_set_mac_address(struct net_device *dev, void *p) - { - struct sockaddr *addr = p; -@@ -1498,6 +1506,7 @@ static const struct file_operations atme - static const struct net_device_ops atmel_netdev_ops = { - .ndo_open = atmel_open, - .ndo_stop = atmel_close, -+ .ndo_change_mtu = atmel_change_mtu, - .ndo_set_mac_address = atmel_set_mac_address, - .ndo_start_xmit = start_tx, - .ndo_do_ioctl = atmel_ioctl, -@@ -1591,10 +1600,6 @@ struct net_device *init_atmel_card(unsig - dev->irq = irq; - dev->base_addr = port; - -- /* MTU range: 68 - 2312 */ -- dev->min_mtu = 68; -- dev->max_mtu = MAX_WIRELESS_BODY - ETH_FCS_LEN; -- - SET_NETDEV_DEV(dev, sys_dev); - - if ((rc = request_irq(dev->irq, service_interrupt, IRQF_SHARED, dev->name, dev))) { ---- a/drivers/net/wireless/cisco/airo.c -+++ b/drivers/net/wireless/cisco/airo.c -@@ -2329,6 +2329,14 @@ static int airo_set_mac_address(struct n - return 0; - } - -+static int airo_change_mtu(struct net_device *dev, int new_mtu) -+{ -+ if ((new_mtu < 68) || (new_mtu > 2400)) -+ return -EINVAL; -+ dev->mtu = new_mtu; -+ return 0; -+} -+ - static LIST_HEAD(airo_devices); - - static void add_airo_dev(struct airo_info *ai) -@@ -2648,6 +2656,7 @@ static const struct net_device_ops airo1 - .ndo_get_stats = airo_get_stats, - .ndo_set_mac_address = airo_set_mac_address, - .ndo_do_ioctl = airo_ioctl, -+ .ndo_change_mtu = airo_change_mtu, - }; - - static void wifi_setup(struct net_device *dev) -@@ -2659,8 +2668,6 @@ static void wifi_setup(struct net_device - dev->type = ARPHRD_IEEE80211; - dev->hard_header_len = ETH_HLEN; - dev->mtu = AIRO_DEF_MTU; -- dev->min_mtu = 68; -- dev->max_mtu = MIC_MSGLEN_MAX; - dev->addr_len = ETH_ALEN; - dev->tx_queue_len = 100; - -@@ -2747,6 +2754,7 @@ static const struct net_device_ops airo_ - .ndo_set_rx_mode = airo_set_multicast_list, - .ndo_set_mac_address = airo_set_mac_address, - .ndo_do_ioctl = airo_ioctl, -+ .ndo_change_mtu = airo_change_mtu, - .ndo_validate_addr = eth_validate_addr, - }; - -@@ -2758,6 +2766,7 @@ static const struct net_device_ops mpi_n - .ndo_set_rx_mode = airo_set_multicast_list, - .ndo_set_mac_address = airo_set_mac_address, - .ndo_do_ioctl = airo_ioctl, -+ .ndo_change_mtu = airo_change_mtu, - .ndo_validate_addr = eth_validate_addr, - }; - -@@ -2813,7 +2822,6 @@ static struct net_device *_init_airo_car - dev->irq = irq; - dev->base_addr = port; - dev->priv_flags &= ~IFF_TX_SKB_SHARING; -- dev->max_mtu = MIC_MSGLEN_MAX; - - SET_NETDEV_DEV(dev, dmdev); - ---- a/drivers/net/wireless/intel/ipw2x00/ipw2100.c -+++ b/drivers/net/wireless/intel/ipw2x00/ipw2100.c -@@ -6039,6 +6039,7 @@ static const struct net_device_ops ipw21 - .ndo_open = ipw2100_open, - .ndo_stop = ipw2100_close, - .ndo_start_xmit = libipw_xmit, -+ .ndo_change_mtu = libipw_change_mtu, - .ndo_tx_timeout = ipw2100_tx_timeout, - .ndo_set_mac_address = ipw2100_set_address, - .ndo_validate_addr = eth_validate_addr, -@@ -6074,8 +6075,6 @@ static struct net_device *ipw2100_alloc_ - dev->wireless_data = &priv->wireless_data; - dev->watchdog_timeo = 3 * HZ; - dev->irq = 0; -- dev->min_mtu = 68; -- dev->max_mtu = LIBIPW_DATA_LEN; - - /* NOTE: We don't use the wireless_handlers hook - * in dev as the system will start throwing WX requests ---- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c -+++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c -@@ -11561,6 +11561,7 @@ static const struct net_device_ops ipw_p - .ndo_open = ipw_prom_open, - .ndo_stop = ipw_prom_stop, - .ndo_start_xmit = ipw_prom_hard_start_xmit, -+ .ndo_change_mtu = libipw_change_mtu, - .ndo_set_mac_address = eth_mac_addr, - .ndo_validate_addr = eth_validate_addr, - }; -@@ -11586,9 +11587,6 @@ static int ipw_prom_alloc(struct ipw_pri - priv->prom_net_dev->type = ARPHRD_IEEE80211_RADIOTAP; - priv->prom_net_dev->netdev_ops = &ipw_prom_netdev_ops; - -- priv->prom_net_dev->min_mtu = 68; -- priv->prom_net_dev->max_mtu = LIBIPW_DATA_LEN; -- - priv->prom_priv->ieee->iw_mode = IW_MODE_MONITOR; - SET_NETDEV_DEV(priv->prom_net_dev, &priv->pci_dev->dev); - -@@ -11621,6 +11619,7 @@ static const struct net_device_ops ipw_n - .ndo_set_rx_mode = ipw_net_set_multicast_list, - .ndo_set_mac_address = ipw_net_set_mac_address, - .ndo_start_xmit = libipw_xmit, -+ .ndo_change_mtu = libipw_change_mtu, - .ndo_validate_addr = eth_validate_addr, - }; - -@@ -11730,9 +11729,6 @@ static int ipw_pci_probe(struct pci_dev - net_dev->wireless_handlers = &ipw_wx_handler_def; - net_dev->ethtool_ops = &ipw_ethtool_ops; - -- net_dev->min_mtu = 68; -- net_dev->max_mtu = LIBIPW_DATA_LEN; -- - err = sysfs_create_group(&pdev->dev.kobj, &ipw_attribute_group); - if (err) { - IPW_ERROR("failed to create sysfs device attributes\n"); ---- a/drivers/net/wireless/intel/ipw2x00/libipw.h -+++ b/drivers/net/wireless/intel/ipw2x00/libipw.h -@@ -948,6 +948,7 @@ static inline int libipw_is_cck_rate(u8 - /* libipw.c */ - void free_libipw(struct net_device *dev, int monitor); - struct net_device *alloc_libipw(int sizeof_priv, int monitor); -+int libipw_change_mtu(struct net_device *dev, int new_mtu); - - void libipw_networks_age(struct libipw_device *ieee, unsigned long age_secs); - ---- a/drivers/net/wireless/intel/ipw2x00/libipw_module.c -+++ b/drivers/net/wireless/intel/ipw2x00/libipw_module.c -@@ -118,6 +118,15 @@ static void libipw_networks_initialize(s - &ieee->network_free_list); - } - -+int libipw_change_mtu(struct net_device *dev, int new_mtu) -+{ -+ if ((new_mtu < 68) || (new_mtu > LIBIPW_DATA_LEN)) -+ return -EINVAL; -+ dev->mtu = new_mtu; -+ return 0; -+} -+EXPORT_SYMBOL(libipw_change_mtu); -+ - struct net_device *alloc_libipw(int sizeof_priv, int monitor) - { - struct libipw_device *ieee; ---- a/drivers/net/wireless/intersil/hostap/hostap_main.c -+++ b/drivers/net/wireless/intersil/hostap/hostap_main.c -@@ -765,6 +765,16 @@ static void hostap_set_multicast_list(st - } - - -+static int prism2_change_mtu(struct net_device *dev, int new_mtu) -+{ -+ if (new_mtu < PRISM2_MIN_MTU || new_mtu > PRISM2_MAX_MTU) -+ return -EINVAL; -+ -+ dev->mtu = new_mtu; -+ return 0; -+} -+ -+ - static void prism2_tx_timeout(struct net_device *dev) - { - struct hostap_interface *iface; -@@ -803,6 +813,7 @@ static const struct net_device_ops hosta - .ndo_do_ioctl = hostap_ioctl, - .ndo_set_mac_address = prism2_set_mac_address, - .ndo_set_rx_mode = hostap_set_multicast_list, -+ .ndo_change_mtu = prism2_change_mtu, - .ndo_tx_timeout = prism2_tx_timeout, - .ndo_validate_addr = eth_validate_addr, - }; -@@ -815,6 +826,7 @@ static const struct net_device_ops hosta - .ndo_do_ioctl = hostap_ioctl, - .ndo_set_mac_address = prism2_set_mac_address, - .ndo_set_rx_mode = hostap_set_multicast_list, -+ .ndo_change_mtu = prism2_change_mtu, - .ndo_tx_timeout = prism2_tx_timeout, - .ndo_validate_addr = eth_validate_addr, - }; -@@ -827,6 +839,7 @@ static const struct net_device_ops hosta - .ndo_do_ioctl = hostap_ioctl, - .ndo_set_mac_address = prism2_set_mac_address, - .ndo_set_rx_mode = hostap_set_multicast_list, -+ .ndo_change_mtu = prism2_change_mtu, - .ndo_tx_timeout = prism2_tx_timeout, - .ndo_validate_addr = eth_validate_addr, - }; -@@ -838,8 +851,6 @@ void hostap_setup_dev(struct net_device - - iface = netdev_priv(dev); - ether_setup(dev); -- dev->min_mtu = PRISM2_MIN_MTU; -- dev->max_mtu = PRISM2_MAX_MTU; - dev->priv_flags &= ~IFF_TX_SKB_SHARING; - - /* kernel callbacks */ ---- a/drivers/net/wireless/intersil/orinoco/main.c -+++ b/drivers/net/wireless/intersil/orinoco/main.c -@@ -322,6 +322,9 @@ int orinoco_change_mtu(struct net_device - { - struct orinoco_private *priv = ndev_priv(dev); - -+ if ((new_mtu < ORINOCO_MIN_MTU) || (new_mtu > ORINOCO_MAX_MTU)) -+ return -EINVAL; -+ - /* MTU + encapsulation + header length */ - if ((new_mtu + ENCAPS_OVERHEAD + sizeof(struct ieee80211_hdr)) > - (priv->nicbuf_size - ETH_HLEN)) -@@ -2285,9 +2288,6 @@ int orinoco_if_add(struct orinoco_privat - dev->base_addr = base_addr; - dev->irq = irq; - -- dev->min_mtu = ORINOCO_MIN_MTU; -- dev->max_mtu = ORINOCO_MAX_MTU; -- - SET_NETDEV_DEV(dev, priv->dev); - ret = register_netdev(dev); - if (ret) diff --git a/package/kernel/mac80211/patches/010-disable_rfkill.patch b/package/kernel/mac80211/patches/010-disable_rfkill.patch index 2902e498d8..d5253063ce 100644 --- a/package/kernel/mac80211/patches/010-disable_rfkill.patch +++ b/package/kernel/mac80211/patches/010-disable_rfkill.patch @@ -10,6 +10,6 @@ +#undef CONFIG_RFKILL_MODULE +#undef CONFIG_RFKILL_FULL_MODULE + - #if LINUX_VERSION_CODE >= KERNEL_VERSION(3,10,0) + #if LINUX_VERSION_IS_GEQ(3,10,0) #include_next #else diff --git a/package/kernel/mac80211/patches/011-backport_strscpy.patch b/package/kernel/mac80211/patches/011-backport_strscpy.patch deleted file mode 100644 index c8e26c46f2..0000000000 --- a/package/kernel/mac80211/patches/011-backport_strscpy.patch +++ /dev/null @@ -1,43 +0,0 @@ ---- a/backport-include/linux/string.h -+++ b/backport-include/linux/string.h -@@ -25,4 +25,8 @@ extern void *memdup_user_nul(const void - void memzero_explicit(void *s, size_t count); - #endif - -+#if (LINUX_VERSION_CODE < KERNEL_VERSION(4,3,0)) -+ssize_t strscpy(char *dest, const char *src, size_t count); -+#endif -+ - #endif /* __BACKPORT_LINUX_STRING_H */ ---- a/compat/backport-4.3.c -+++ b/compat/backport-4.3.c -@@ -57,3 +57,29 @@ void seq_hex_dump(struct seq_file *m, co - } - } - EXPORT_SYMBOL_GPL(seq_hex_dump); -+ -+ssize_t strscpy(char *dest, const char *src, size_t count) -+{ -+ long res = 0; -+ -+ if (count == 0) -+ return -E2BIG; -+ -+ while (count) { -+ char c; -+ -+ c = src[res]; -+ dest[res] = c; -+ if (!c) -+ return res; -+ res++; -+ count--; -+ } -+ -+ /* Hit buffer length without finding a NUL; force NUL-termination. */ -+ if (res) -+ dest[res-1] = '\0'; -+ -+ return -E2BIG; -+} -+EXPORT_SYMBOL_GPL(strscpy); diff --git a/package/kernel/mac80211/patches/013-backport-dev_coredumpm-function.patch b/package/kernel/mac80211/patches/013-backport-dev_coredumpm-function.patch deleted file mode 100644 index 2c80aedc48..0000000000 --- a/package/kernel/mac80211/patches/013-backport-dev_coredumpm-function.patch +++ /dev/null @@ -1,156 +0,0 @@ -From ec8549e611465558bdf1bb5e9d308f39e5e248cd Mon Sep 17 00:00:00 2001 -From: Hauke Mehrtens -Date: Sun, 17 Sep 2017 14:41:48 +0200 -Subject: backport dev_coredumpm() function - -This is copied from a more recent backports version to add the -dev_coredumpm() function when the internal core devdump is not used. ---- - compat/Makefile | 1 + - compat/backport-4.7.c | 82 ++++++++++++++++++++++++++++++++++++++++++ - include/linux/bp-devcoredump.h | 32 +++++++++++++++++ - include/linux/devcoredump.h | 1 + - 4 files changed, 116 insertions(+) - create mode 100644 compat/backport-4.7.c - create mode 100644 include/linux/bp-devcoredump.h - ---- a/compat/Makefile -+++ b/compat/Makefile -@@ -32,6 +32,7 @@ compat-$(CPTCFG_KERNEL_4_3) += backport- - compat-$(CPTCFG_KERNEL_4_4) += backport-4.4.o - compat-$(CPTCFG_KERNEL_4_5) += backport-4.5.o - compat-$(CPTCFG_KERNEL_4_6) += backport-4.6.o -+compat-$(CPTCFG_KERNEL_4_6) += backport-4.7.o - - compat-$(CPTCFG_BPAUTO_BUILD_CRYPTO_CCM) += crypto-ccm.o - compat-$(CPTCFG_BPAUTO_CRYPTO_SKCIPHER) += crypto-skcipher.o ---- /dev/null -+++ b/compat/backport-4.7.c -@@ -0,0 +1,82 @@ -+/* -+ * Copyright(c) 2016 Hauke Mehrtens -+ * -+ * Backport functionality introduced in Linux 4.7. -+ * -+ * This program is free software; you can redistribute it and/or modify -+ * it under the terms of the GNU General Public License version 2 as -+ * published by the Free Software Foundation. -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+/* -+ * Below 3.18 or if the kernel has devcoredump disabled, we copied the -+ * entire devcoredump, so no need to define these functions. -+ */ -+#if LINUX_VERSION_CODE >= KERNEL_VERSION(3,18,0) && \ -+ !defined(CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP) -+#include -+#include -+ -+static void devcd_free_sgtable(void *data) -+{ -+ struct scatterlist *table = data; -+ int i; -+ struct page *page; -+ struct scatterlist *iter; -+ struct scatterlist *delete_iter; -+ -+ /* free pages */ -+ iter = table; -+ for_each_sg(table, iter, sg_nents(table), i) { -+ page = sg_page(iter); -+ if (page) -+ __free_page(page); -+ } -+ -+ /* then free all chained tables */ -+ iter = table; -+ delete_iter = table; /* always points on a head of a table */ -+ while (!sg_is_last(iter)) { -+ iter++; -+ if (sg_is_chain(iter)) { -+ iter = sg_chain_ptr(iter); -+ kfree(delete_iter); -+ delete_iter = iter; -+ } -+ } -+ -+ /* free the last table */ -+ kfree(delete_iter); -+} -+ -+static ssize_t devcd_read_from_sgtable(char *buffer, loff_t offset, -+ size_t buf_len, void *data, -+ size_t data_len) -+{ -+ struct scatterlist *table = data; -+ -+ if (offset > data_len) -+ return -EINVAL; -+ -+ if (offset + buf_len > data_len) -+ buf_len = data_len - offset; -+ return sg_pcopy_to_buffer(table, sg_nents(table), buffer, buf_len, -+ offset); -+} -+ -+void dev_coredumpsg(struct device *dev, struct scatterlist *table, -+ size_t datalen, gfp_t gfp) -+{ -+ dev_coredumpm(dev, THIS_MODULE, table, datalen, gfp, -+ devcd_read_from_sgtable, devcd_free_sgtable); -+} -+EXPORT_SYMBOL_GPL(dev_coredumpsg); -+#endif /* >= 3.18.0 */ ---- /dev/null -+++ b/include/linux/bp-devcoredump.h -@@ -0,0 +1,32 @@ -+#ifndef __BACKPORT_LINUX_DEVCOREDUMP_H -+#define __BACKPORT_LINUX_DEVCOREDUMP_H -+#include -+#include -+ -+/* We only need to add our wrapper inside the range from 3.18 until -+ * 4.6, outside that we can let our BPAUTO mechanism handle it. -+ */ -+#if (LINUX_VERSION_CODE >= KERNEL_VERSION(3,18,0) && \ -+ LINUX_VERSION_CODE < KERNEL_VERSION(4,7,0)) -+static inline -+void backport_dev_coredumpm(struct device *dev, struct module *owner, -+ void *data, size_t datalen, gfp_t gfp, -+ ssize_t (*read_fn)(char *buffer, loff_t offset, -+ size_t count, void *data, -+ size_t datalen), -+ void (*free_fn)(void *data)) -+{ -+ return dev_coredumpm(dev, owner, (const void *)data, datalen, gfp, -+ (void *)read_fn, (void *)free_fn); -+} -+ -+#define dev_coredumpm LINUX_BACKPORT(dev_coredumpm) -+ -+#define dev_coredumpsg LINUX_BACKPORT(dev_coredumpsg) -+void dev_coredumpsg(struct device *dev, struct scatterlist *table, -+ size_t datalen, gfp_t gfp); -+ -+#endif /* (LINUX_VERSION_IS_GEQ(3,18,0) && \ -+ LINUX_VERSION_IS_LESS(4,7,0)) */ -+ -+#endif /* __BACKPORT_LINUX_DEVCOREDUMP_H */ ---- a/include/linux/devcoredump.h -+++ b/include/linux/devcoredump.h -@@ -1,6 +1,7 @@ - /* Automatically created during backport process */ - #ifndef CPTCFG_BPAUTO_BUILD_WANT_DEV_COREDUMP - #include_next -+#include - #else - #undef dev_coredumpv - #define dev_coredumpv LINUX_BACKPORT(dev_coredumpv) diff --git a/package/kernel/mac80211/patches/015-ipw200-mtu.patch b/package/kernel/mac80211/patches/015-ipw200-mtu.patch new file mode 100644 index 0000000000..8d273a095b --- /dev/null +++ b/package/kernel/mac80211/patches/015-ipw200-mtu.patch @@ -0,0 +1,34 @@ +--- a/drivers/net/wireless/intel/ipw2x00/ipw2200.c ++++ b/drivers/net/wireless/intel/ipw2x00/ipw2200.c +@@ -11506,6 +11506,15 @@ static const struct attribute_group ipw_ + .attrs = ipw_sysfs_entries, + }; + ++#if LINUX_VERSION_IS_LESS(4,10,0) ++static int __change_mtu(struct net_device *ndev, int new_mtu){ ++ if (new_mtu < 68 || new_mtu > LIBIPW_DATA_LEN) ++ return -EINVAL; ++ ndev->mtu = new_mtu; ++ return 0; ++} ++#endif ++ + #ifdef CPTCFG_IPW2200_PROMISCUOUS + static int ipw_prom_open(struct net_device *dev) + { +@@ -11554,15 +11563,6 @@ static netdev_tx_t ipw_prom_hard_start_x + return NETDEV_TX_OK; + } + +-#if LINUX_VERSION_IS_LESS(4,10,0) +-static int __change_mtu(struct net_device *ndev, int new_mtu){ +- if (new_mtu < 68 || new_mtu > LIBIPW_DATA_LEN) +- return -EINVAL; +- ndev->mtu = new_mtu; +- return 0; +-} +-#endif +- + static const struct net_device_ops ipw_prom_netdev_ops = { + #if LINUX_VERSION_IS_LESS(4,10,0) + .ndo_change_mtu = __change_mtu, diff --git a/package/kernel/mac80211/patches/020-01-rt2x00-avoid-introducing-a-USB-dependency-in-the-rt2.patch b/package/kernel/mac80211/patches/020-01-rt2x00-avoid-introducing-a-USB-dependency-in-the-rt2.patch deleted file mode 100644 index cf551fde02..0000000000 --- a/package/kernel/mac80211/patches/020-01-rt2x00-avoid-introducing-a-USB-dependency-in-the-rt2.patch +++ /dev/null @@ -1,78 +0,0 @@ -From 6232c17438ed01f43665197db5a98a4a4f77ef47 Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Thu, 2 Feb 2017 10:57:40 +0100 -Subject: [PATCH 01/19] rt2x00: avoid introducing a USB dependency in the - rt2x00lib module - -As reported by Felix: - -Though protected by an ifdef, introducing an usb symbol dependency in -the rt2x00lib module is a major inconvenience for distributions that -package kernel modules split into individual packages. - -Get rid of this unnecessary dependency by calling the usb related -function from a more suitable place. - -Cc: Vishal Thanki -Reported-by: Felix Fietkau -Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB") -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 23 ++++++++--------------- - drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 5 +++++ - 2 files changed, 13 insertions(+), 15 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1436,21 +1436,6 @@ void rt2x00lib_remove_dev(struct rt2x00_ - cancel_work_sync(&rt2x00dev->intf_work); - cancel_delayed_work_sync(&rt2x00dev->autowakeup_work); - cancel_work_sync(&rt2x00dev->sleep_work); --#if IS_ENABLED(CPTCFG_RT2X00_LIB_USB) -- if (rt2x00_is_usb(rt2x00dev)) { -- usb_kill_anchored_urbs(rt2x00dev->anchor); -- hrtimer_cancel(&rt2x00dev->txstatus_timer); -- cancel_work_sync(&rt2x00dev->rxdone_work); -- cancel_work_sync(&rt2x00dev->txdone_work); -- } --#endif -- if (rt2x00dev->workqueue) -- destroy_workqueue(rt2x00dev->workqueue); -- -- /* -- * Free the tx status fifo. -- */ -- kfifo_free(&rt2x00dev->txstatus_fifo); - - /* - * Kill the tx status tasklet. -@@ -1466,6 +1451,14 @@ void rt2x00lib_remove_dev(struct rt2x00_ - */ - rt2x00lib_uninitialize(rt2x00dev); - -+ if (rt2x00dev->workqueue) -+ destroy_workqueue(rt2x00dev->workqueue); -+ -+ /* -+ * Free the tx status fifo. -+ */ -+ kfifo_free(&rt2x00dev->txstatus_fifo); -+ - /* - * Free extra components - */ ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c -@@ -744,6 +744,11 @@ void rt2x00usb_uninitialize(struct rt2x0 - { - struct data_queue *queue; - -+ usb_kill_anchored_urbs(rt2x00dev->anchor); -+ hrtimer_cancel(&rt2x00dev->txstatus_timer); -+ cancel_work_sync(&rt2x00dev->rxdone_work); -+ cancel_work_sync(&rt2x00dev->txdone_work); -+ - queue_for_each(rt2x00dev, queue) - rt2x00usb_free_entries(queue); - } diff --git a/package/kernel/mac80211/patches/020-02-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch b/package/kernel/mac80211/patches/020-02-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch deleted file mode 100644 index d096b64a8a..0000000000 --- a/package/kernel/mac80211/patches/020-02-rt2x00usb-do-not-anchor-rx-and-tx-urb-s.patch +++ /dev/null @@ -1,56 +0,0 @@ -From 93c7018ec16bb83399dd4db61c361a6d6aba0d5a Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 8 Feb 2017 12:18:09 +0100 -Subject: [PATCH 02/19] rt2x00usb: do not anchor rx and tx urb's - -We might kill TX or RX urb during rt2x00usb_flush_entry(), what can -cause anchor list corruption like shown below: - -[ 2074.035633] WARNING: CPU: 2 PID: 14480 at lib/list_debug.c:33 __list_add+0xac/0xc0 -[ 2074.035634] list_add corruption. prev->next should be next (ffff88020f362c28), but was dead000000000100. (prev=ffff8801d161bb70). - -[ 2074.035670] Call Trace: -[ 2074.035672] [] dump_stack+0x63/0x8c -[ 2074.035674] [] __warn+0xd1/0xf0 -[ 2074.035676] [] warn_slowpath_fmt+0x5f/0x80 -[ 2074.035678] [] ? rt2x00usb_register_write_lock+0x3d/0x60 [rt2800usb] -[ 2074.035679] [] __list_add+0xac/0xc0 -[ 2074.035681] [] usb_anchor_urb+0x4c/0xa0 -[ 2074.035683] [] rt2x00usb_kick_rx_entry+0xaf/0x100 [rt2x00usb] -[ 2074.035684] [] rt2x00usb_clear_entry+0x22/0x30 [rt2x00usb] - -To fix do not anchor TX and RX urb's, it is not needed as during -shutdown we kill those urbs in rt2x00usb_free_entries(). - -Cc: Vishal Thanki -Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB") -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 4 ---- - 1 file changed, 4 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c -@@ -319,10 +319,8 @@ static bool rt2x00usb_kick_tx_entry(stru - entry->skb->data, length, - rt2x00usb_interrupt_txdone, entry); - -- usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor); - status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC); - if (status) { -- usb_unanchor_urb(entry_priv->urb); - if (status == -ENODEV) - clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); -@@ -410,10 +408,8 @@ static bool rt2x00usb_kick_rx_entry(stru - entry->skb->data, entry->skb->len, - rt2x00usb_interrupt_rxdone, entry); - -- usb_anchor_urb(entry_priv->urb, rt2x00dev->anchor); - status = usb_submit_urb(entry_priv->urb, GFP_ATOMIC); - if (status) { -- usb_unanchor_urb(entry_priv->urb); - if (status == -ENODEV) - clear_bit(DEVICE_STATE_PRESENT, &rt2x00dev->flags); - set_bit(ENTRY_DATA_IO_FAILED, &entry->flags); diff --git a/package/kernel/mac80211/patches/020-03-rt2x00usb-fix-anchor-initialization.patch b/package/kernel/mac80211/patches/020-03-rt2x00usb-fix-anchor-initialization.patch deleted file mode 100644 index 5ff73df2a6..0000000000 --- a/package/kernel/mac80211/patches/020-03-rt2x00usb-fix-anchor-initialization.patch +++ /dev/null @@ -1,70 +0,0 @@ -From 0488a6121dfe6cbd44de15ea3627913b7549a1e9 Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 8 Feb 2017 12:18:10 +0100 -Subject: [PATCH 03/19] rt2x00usb: fix anchor initialization - -If device fail to initialize we can OOPS in rt2x00lib_remove_dev(), due -to using uninitialized usb_anchor structure: - -[ 855.435820] ieee80211 phy3: rt2x00usb_vendor_request: Error - Vendor Request 0x07 failed for offset 0x1000 with error -19 -[ 855.435826] ieee80211 phy3: rt2800_probe_rt: Error - Invalid RT chipset 0x0000, rev 0000 detected -[ 855.435829] ieee80211 phy3: rt2x00lib_probe_dev: Error - Failed to allocate device -[ 855.435845] BUG: unable to handle kernel NULL pointer dereference at 0000000000000028 -[ 855.435900] IP: _raw_spin_lock_irq+0xd/0x30 -[ 855.435926] PGD 0 -[ 855.435953] Oops: 0002 [#1] SMP - -[ 855.437011] Call Trace: -[ 855.437029] ? usb_kill_anchored_urbs+0x27/0xc0 -[ 855.437061] rt2x00lib_remove_dev+0x190/0x1c0 [rt2x00lib] -[ 855.437097] rt2x00lib_probe_dev+0x246/0x7a0 [rt2x00lib] -[ 855.437149] ? ieee80211_roc_setup+0x9e/0xd0 [mac80211] -[ 855.437183] ? __kmalloc+0x1af/0x1f0 -[ 855.437207] ? rt2x00usb_probe+0x13d/0xc50 [rt2x00usb] -[ 855.437240] rt2x00usb_probe+0x155/0xc50 [rt2x00usb] -[ 855.437273] rt2800usb_probe+0x15/0x20 [rt2800usb] -[ 855.437304] usb_probe_interface+0x159/0x2d0 -[ 855.437333] driver_probe_device+0x2bb/0x460 - -Patch changes initialization sequence to fix the problem. - -Cc: Vishal Thanki -Fixes: 8b4c0009313f ("rt2x00usb: Use usb anchor to manage URB") -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00usb.c | 13 ++++++++----- - 1 file changed, 8 insertions(+), 5 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00usb.c -@@ -825,10 +825,6 @@ int rt2x00usb_probe(struct usb_interface - if (retval) - goto exit_free_device; - -- retval = rt2x00lib_probe_dev(rt2x00dev); -- if (retval) -- goto exit_free_reg; -- - rt2x00dev->anchor = devm_kmalloc(&usb_dev->dev, - sizeof(struct usb_anchor), - GFP_KERNEL); -@@ -836,10 +832,17 @@ int rt2x00usb_probe(struct usb_interface - retval = -ENOMEM; - goto exit_free_reg; - } -- - init_usb_anchor(rt2x00dev->anchor); -+ -+ retval = rt2x00lib_probe_dev(rt2x00dev); -+ if (retval) -+ goto exit_free_anchor; -+ - return 0; - -+exit_free_anchor: -+ usb_kill_anchored_urbs(rt2x00dev->anchor); -+ - exit_free_reg: - rt2x00usb_free_reg(rt2x00dev); - diff --git a/package/kernel/mac80211/patches/020-04-rt61pci-use-entry-directly.patch b/package/kernel/mac80211/patches/020-04-rt61pci-use-entry-directly.patch deleted file mode 100644 index 274d8f7c3f..0000000000 --- a/package/kernel/mac80211/patches/020-04-rt61pci-use-entry-directly.patch +++ /dev/null @@ -1,23 +0,0 @@ -From 80a97eae304631f57ff8560f87c0b18b95321443 Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 8 Feb 2017 13:51:29 +0100 -Subject: [PATCH 04/19] rt61pci: use entry directly - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt61pci.c | 3 +-- - 1 file changed, 1 insertion(+), 2 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c -@@ -1903,8 +1903,7 @@ static void rt61pci_write_tx_desc(struct - - rt2x00_desc_read(txd, 5, &word); - rt2x00_set_field32(&word, TXD_W5_PID_TYPE, entry->queue->qid); -- rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, -- skbdesc->entry->entry_idx); -+ rt2x00_set_field32(&word, TXD_W5_PID_SUBTYPE, entry->entry_idx); - rt2x00_set_field32(&word, TXD_W5_TX_POWER, - TXPOWER_TO_DEV(entry->queue->rt2x00dev->tx_power)); - rt2x00_set_field32(&word, TXD_W5_WAITING_DMA_DONE_INT, 1); diff --git a/package/kernel/mac80211/patches/020-05-rt2x00-call-entry-directly-in-rt2x00_dump_frame.patch b/package/kernel/mac80211/patches/020-05-rt2x00-call-entry-directly-in-rt2x00_dump_frame.patch deleted file mode 100644 index 241c1127bc..0000000000 --- a/package/kernel/mac80211/patches/020-05-rt2x00-call-entry-directly-in-rt2x00_dump_frame.patch +++ /dev/null @@ -1,158 +0,0 @@ -From 2ceb813798e1fd33e71a574771828c0f298e077b Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 8 Feb 2017 13:51:30 +0100 -Subject: [PATCH 05/19] rt2x00: call entry directly in rt2x00_dump_frame - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2400pci.c | 2 +- - drivers/net/wireless/ralink/rt2x00/rt2500pci.c | 2 +- - drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 2 +- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 +- - drivers/net/wireless/ralink/rt2x00/rt2x00.h | 4 ++-- - drivers/net/wireless/ralink/rt2x00/rt2x00debug.c | 7 ++++--- - drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 4 ++-- - drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 2 +- - drivers/net/wireless/ralink/rt2x00/rt61pci.c | 2 +- - drivers/net/wireless/ralink/rt2x00/rt73usb.c | 2 +- - 10 files changed, 15 insertions(+), 14 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2400pci.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2400pci.c -@@ -1200,7 +1200,7 @@ static void rt2400pci_write_beacon(struc - /* - * Dump beacon to userspace through debugfs. - */ -- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry); - out: - /* - * Enable beaconing again. ---- a/drivers/net/wireless/ralink/rt2x00/rt2500pci.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2500pci.c -@@ -1349,7 +1349,7 @@ static void rt2500pci_write_beacon(struc - /* - * Dump beacon to userspace through debugfs. - */ -- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry); - out: - /* - * Enable beaconing again. ---- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c -@@ -1170,7 +1170,7 @@ static void rt2500usb_write_beacon(struc - /* - * Dump beacon to userspace through debugfs. - */ -- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry); - - /* - * USB devices cannot blindly pass the skb->len as the ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -1014,7 +1014,7 @@ void rt2800_write_beacon(struct queue_en - /* - * Dump beacon to userspace through debugfs. - */ -- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry); - - /* - * Write entire beacon with TXWI and padding to register. ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -1400,11 +1400,11 @@ void rt2x00queue_flush_queues(struct rt2 - */ - #ifdef CPTCFG_RT2X00_LIB_DEBUGFS - void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, -- enum rt2x00_dump_type type, struct sk_buff *skb); -+ enum rt2x00_dump_type type, struct queue_entry *entry); - #else - static inline void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, - enum rt2x00_dump_type type, -- struct sk_buff *skb) -+ struct queue_entry *entry) - { - } - #endif /* CPTCFG_RT2X00_LIB_DEBUGFS */ ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00debug.c -@@ -157,9 +157,10 @@ void rt2x00debug_update_crypto(struct rt - } - - void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, -- enum rt2x00_dump_type type, struct sk_buff *skb) -+ enum rt2x00_dump_type type, struct queue_entry *entry) - { - struct rt2x00debug_intf *intf = rt2x00dev->debugfs_intf; -+ struct sk_buff *skb = entry->skb; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(skb); - struct sk_buff *skbcopy; - struct rt2x00dump_hdr *dump_hdr; -@@ -196,8 +197,8 @@ void rt2x00debug_dump_frame(struct rt2x0 - dump_hdr->chip_rf = cpu_to_le16(rt2x00dev->chip.rf); - dump_hdr->chip_rev = cpu_to_le16(rt2x00dev->chip.rev); - dump_hdr->type = cpu_to_le16(type); -- dump_hdr->queue_index = skbdesc->entry->queue->qid; -- dump_hdr->entry_index = skbdesc->entry->entry_idx; -+ dump_hdr->queue_index = entry->queue->qid; -+ dump_hdr->entry_index = entry->entry_idx; - dump_hdr->timestamp_sec = cpu_to_le32(timestamp.tv_sec); - dump_hdr->timestamp_usec = cpu_to_le32(timestamp.tv_usec); - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -363,7 +363,7 @@ void rt2x00lib_txdone(struct queue_entry - * Send frame to debugfs immediately, after this call is completed - * we are going to overwrite the skb->cb array. - */ -- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry->skb); -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry); - - /* - * Determine if the frame has been successfully transmitted and -@@ -772,7 +772,7 @@ void rt2x00lib_rxdone(struct queue_entry - */ - rt2x00link_update_stats(rt2x00dev, entry->skb, &rxdesc); - rt2x00debug_update_crypto(rt2x00dev, &rxdesc); -- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry->skb); -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_RXDONE, entry); - - /* - * Initialize RX status information, and send frame ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c -@@ -544,7 +544,7 @@ static void rt2x00queue_write_tx_descrip - * All processing on the frame has been completed, this means - * it is now ready to be dumped to userspace through debugfs. - */ -- rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry->skb); -+ rt2x00debug_dump_frame(queue->rt2x00dev, DUMP_FRAME_TX, entry); - } - - static void rt2x00queue_kick_tx_queue(struct data_queue *queue, ---- a/drivers/net/wireless/ralink/rt2x00/rt61pci.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt61pci.c -@@ -1988,7 +1988,7 @@ static void rt61pci_write_beacon(struct - /* - * Dump beacon to userspace through debugfs. - */ -- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry); - - /* - * Write entire beacon with descriptor and padding to register. ---- a/drivers/net/wireless/ralink/rt2x00/rt73usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt73usb.c -@@ -1557,7 +1557,7 @@ static void rt73usb_write_beacon(struct - /* - * Dump beacon to userspace through debugfs. - */ -- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry->skb); -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_BEACON, entry); - - /* - * Write entire beacon with descriptor and padding to register. diff --git a/package/kernel/mac80211/patches/020-06-rt2x00-remove-queue_entry-from-skbdesc.patch b/package/kernel/mac80211/patches/020-06-rt2x00-remove-queue_entry-from-skbdesc.patch deleted file mode 100644 index c2ef9c1bb0..0000000000 --- a/package/kernel/mac80211/patches/020-06-rt2x00-remove-queue_entry-from-skbdesc.patch +++ /dev/null @@ -1,52 +0,0 @@ -From cf81db30a6edcca791b1bfa5348a162471121d11 Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 8 Feb 2017 13:51:31 +0100 -Subject: [PATCH 06/19] rt2x00: remove queue_entry from skbdesc - -queue_entry field of skbdesc is not read any more, remove it to allow -skbdesc contain other data. - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 3 --- - drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 2 -- - 2 files changed, 5 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c -@@ -83,7 +83,6 @@ struct sk_buff *rt2x00queue_alloc_rxskb( - */ - skbdesc = get_skb_frame_desc(skb); - memset(skbdesc, 0, sizeof(*skbdesc)); -- skbdesc->entry = entry; - - if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_DMA)) { - dma_addr_t skb_dma; -@@ -689,7 +688,6 @@ int rt2x00queue_write_tx_frame(struct da - goto out; - } - -- skbdesc->entry = entry; - entry->skb = skb; - - /* -@@ -774,7 +772,6 @@ int rt2x00queue_update_beacon(struct rt2 - */ - skbdesc = get_skb_frame_desc(intf->beacon->skb); - memset(skbdesc, 0, sizeof(*skbdesc)); -- skbdesc->entry = intf->beacon; - - /* - * Send beacon to hardware. ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h -@@ -116,8 +116,6 @@ struct skb_frame_desc { - __le32 iv[2]; - - dma_addr_t skb_dma; -- -- struct queue_entry *entry; - }; - - /** diff --git a/package/kernel/mac80211/patches/020-07-rt2500usb-don-t-mark-register-accesses-as-inline.patch b/package/kernel/mac80211/patches/020-07-rt2500usb-don-t-mark-register-accesses-as-inline.patch deleted file mode 100644 index 65496ca467..0000000000 --- a/package/kernel/mac80211/patches/020-07-rt2500usb-don-t-mark-register-accesses-as-inline.patch +++ /dev/null @@ -1,79 +0,0 @@ -From 7272416609126e8910b7f0d0e3dba008aa87830c Mon Sep 17 00:00:00 2001 -From: Arnd Bergmann -Date: Tue, 14 Feb 2017 22:28:33 +0100 -Subject: [PATCH 07/19] rt2500usb: don't mark register accesses as inline - -When CONFIG_KASAN is set, we get a rather large stack here: - -drivers/net/wireless/ralink/rt2x00/rt2500usb.c: In function 'rt2500usb_set_device_state': -drivers/net/wireless/ralink/rt2x00/rt2500usb.c:1074:1: error: the frame size of 3032 bytes is larger than 100 bytes [-Werror=frame-larger-than=] - -If we don't force those functions to be inline, the compiler can figure this -out better itself and not inline the functions when doing so would be harmful, -reducing the stack size to a merge 256 bytes. - -Note that there is another problem that manifests in this driver, as a result -of the typecheck() macro causing even larger stack frames. - -Signed-off-by: Arnd Bergmann -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2500usb.c | 19 +++++-------------- - 1 file changed, 5 insertions(+), 14 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2500usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2500usb.c -@@ -55,7 +55,7 @@ MODULE_PARM_DESC(nohwcrypt, "Disable har - * If the csr_mutex is already held then the _lock variants must - * be used instead. - */ --static inline void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev, -+static void rt2500usb_register_read(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 *value) - { -@@ -66,7 +66,7 @@ static inline void rt2500usb_register_re - *value = le16_to_cpu(reg); - } - --static inline void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev, -+static void rt2500usb_register_read_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 *value) - { -@@ -77,16 +77,7 @@ static inline void rt2500usb_register_re - *value = le16_to_cpu(reg); - } - --static inline void rt2500usb_register_multiread(struct rt2x00_dev *rt2x00dev, -- const unsigned int offset, -- void *value, const u16 length) --{ -- rt2x00usb_vendor_request_buff(rt2x00dev, USB_MULTI_READ, -- USB_VENDOR_REQUEST_IN, offset, -- value, length); --} -- --static inline void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev, -+static void rt2500usb_register_write(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 value) - { -@@ -96,7 +87,7 @@ static inline void rt2500usb_register_wr - ®, sizeof(reg)); - } - --static inline void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev, -+static void rt2500usb_register_write_lock(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - u16 value) - { -@@ -106,7 +97,7 @@ static inline void rt2500usb_register_wr - ®, sizeof(reg), REGISTER_TIMEOUT); - } - --static inline void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, -+static void rt2500usb_register_multiwrite(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, - void *value, const u16 length) - { diff --git a/package/kernel/mac80211/patches/020-08-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch b/package/kernel/mac80211/patches/020-08-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch deleted file mode 100644 index 8b61235e11..0000000000 --- a/package/kernel/mac80211/patches/020-08-rt2x00-rt2800lib-move-rt2800_drv_data-declaration-in.patch +++ /dev/null @@ -1,87 +0,0 @@ -From 96609f366c6f792421e1939c5c834abbe24eb88a Mon Sep 17 00:00:00 2001 -From: Gabor Juhos -Date: Wed, 15 Feb 2017 10:25:04 +0100 -Subject: [PATCH 08/19] rt2x00: rt2800lib: move rt2800_drv_data declaration - into rt2800lib.h - -The rt2800_drv_data structure contains driver specific -information. Move the declaration into the rt2800lib.h -header which is a more logical place for it. Also fix -the comment style to avoid checkpatch warning. - -The patch contains no functional changes, it is in -preparation for the next patch. - -Signed-off-by: Gabor Juhos -Signed-off-by: Daniel Golle -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2800.h | 25 ------------------------- - drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 23 +++++++++++++++++++++++ - 2 files changed, 23 insertions(+), 25 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h -@@ -2987,29 +2987,4 @@ enum rt2800_eeprom_word { - */ - #define BCN_TBTT_OFFSET 64 - --/* -- * Hardware has 255 WCID table entries. First 32 entries are reserved for -- * shared keys. Since parts of the pairwise key table might be shared with -- * the beacon frame buffers 6 & 7 we could only use the first 222 entries. -- */ --#define WCID_START 33 --#define WCID_END 222 --#define STA_IDS_SIZE (WCID_END - WCID_START + 2) -- --/* -- * RT2800 driver data structure -- */ --struct rt2800_drv_data { -- u8 calibration_bw20; -- u8 calibration_bw40; -- u8 bbp25; -- u8 bbp26; -- u8 txmixer_gain_24g; -- u8 txmixer_gain_5g; -- u8 max_psdu; -- unsigned int tbtt_tick; -- unsigned int ampdu_factor_cnt[4]; -- DECLARE_BITMAP(sta_ids, STA_IDS_SIZE); --}; -- - #endif /* RT2800_H */ ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -@@ -20,6 +20,29 @@ - #ifndef RT2800LIB_H - #define RT2800LIB_H - -+/* -+ * Hardware has 255 WCID table entries. First 32 entries are reserved for -+ * shared keys. Since parts of the pairwise key table might be shared with -+ * the beacon frame buffers 6 & 7 we could only use the first 222 entries. -+ */ -+#define WCID_START 33 -+#define WCID_END 222 -+#define STA_IDS_SIZE (WCID_END - WCID_START + 2) -+ -+/* RT2800 driver data structure */ -+struct rt2800_drv_data { -+ u8 calibration_bw20; -+ u8 calibration_bw40; -+ u8 bbp25; -+ u8 bbp26; -+ u8 txmixer_gain_24g; -+ u8 txmixer_gain_5g; -+ u8 max_psdu; -+ unsigned int tbtt_tick; -+ unsigned int ampdu_factor_cnt[4]; -+ DECLARE_BITMAP(sta_ids, STA_IDS_SIZE); -+}; -+ - struct rt2800_ops { - void (*register_read)(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 *value); diff --git a/package/kernel/mac80211/patches/020-09-rt2800-identify-station-based-on-status-WCID.patch b/package/kernel/mac80211/patches/020-09-rt2800-identify-station-based-on-status-WCID.patch deleted file mode 100644 index 922c35833c..0000000000 --- a/package/kernel/mac80211/patches/020-09-rt2800-identify-station-based-on-status-WCID.patch +++ /dev/null @@ -1,85 +0,0 @@ -From a13d985f26f6df07d5c5c0e190477628e236babc Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 15 Feb 2017 10:25:05 +0100 -Subject: [PATCH 09/19] rt2800: identify station based on status WCID - -Add framework to identify sta based on tx status WCID. This is currently -not used, will start be utilized in the future patch. - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 5 +++++ - drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 1 + - drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 3 ++- - 3 files changed, 8 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -855,11 +855,13 @@ EXPORT_SYMBOL_GPL(rt2800_process_rxwi); - void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi) - { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; -+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; - struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); - struct txdone_entry_desc txdesc; - u32 word; - u16 mcs, real_mcs; - int aggr, ampdu; -+ int wcid; - - /* - * Obtain the status about this packet. -@@ -872,6 +874,7 @@ void rt2800_txdone_entry(struct queue_en - - real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS); - aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE); -+ wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID); - - /* - * If a frame was meant to be sent as a single non-aggregated MPDU -@@ -1468,6 +1471,7 @@ int rt2800_sta_add(struct rt2x00_dev *rt - return 0; - - __set_bit(wcid - WCID_START, drv_data->sta_ids); -+ drv_data->wcid_to_sta[wcid - WCID_START] = sta; - - /* - * Clean up WCID attributes and write STA address to the device. -@@ -1498,6 +1502,7 @@ int rt2800_sta_remove(struct rt2x00_dev - * get renewed when the WCID is reused. - */ - rt2800_config_wcid(rt2x00dev, NULL, wcid); -+ drv_data->wcid_to_sta[wcid - WCID_START] = NULL; - __clear_bit(wcid - WCID_START, drv_data->sta_ids); - - return 0; ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -@@ -41,6 +41,7 @@ struct rt2800_drv_data { - unsigned int tbtt_tick; - unsigned int ampdu_factor_cnt[4]; - DECLARE_BITMAP(sta_ids, STA_IDS_SIZE); -+ struct ieee80211_sta *wcid_to_sta[STA_IDS_SIZE]; - }; - - struct rt2800_ops { ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h -@@ -102,7 +102,7 @@ enum skb_frame_desc_flags { - * of the scope of the skb->data pointer. - * @iv: IV/EIV data used during encryption/decryption. - * @skb_dma: (PCI-only) the DMA address associated with the sk buffer. -- * @entry: The entry to which this sk buffer belongs. -+ * @sta: The station where sk buffer was sent. - */ - struct skb_frame_desc { - u8 flags; -@@ -116,6 +116,7 @@ struct skb_frame_desc { - __le32 iv[2]; - - dma_addr_t skb_dma; -+ struct ieee80211_sta *sta; - }; - - /** diff --git a/package/kernel/mac80211/patches/020-10-rt2x00-separte-filling-tx-status-from-rt2x00lib_txdo.patch b/package/kernel/mac80211/patches/020-10-rt2x00-separte-filling-tx-status-from-rt2x00lib_txdo.patch deleted file mode 100644 index 84f2732b22..0000000000 --- a/package/kernel/mac80211/patches/020-10-rt2x00-separte-filling-tx-status-from-rt2x00lib_txdo.patch +++ /dev/null @@ -1,173 +0,0 @@ -From 5edb05afebba8f488a30db29550e55c42eea6d6a Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 15 Feb 2017 10:25:06 +0100 -Subject: [PATCH 10/19] rt2x00: separte filling tx status from rt2x00lib_txdone - -This makes rt2x00lib_txdone a bit simpler and will allow to reuse code -in different variant of txdone which I'm preparing. - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 141 +++++++++++++------------ - 1 file changed, 76 insertions(+), 65 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -313,73 +313,14 @@ static inline int rt2x00lib_txdone_bar_s - return ret; - } - --void rt2x00lib_txdone(struct queue_entry *entry, -- struct txdone_entry_desc *txdesc) -+static void rt2x00lib_fill_tx_status(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_tx_info *tx_info, -+ struct skb_frame_desc *skbdesc, -+ struct txdone_entry_desc *txdesc, -+ bool success) - { -- struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; -- struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); -- struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); -- unsigned int header_length, i; - u8 rate_idx, rate_flags, retry_rates; -- u8 skbdesc_flags = skbdesc->flags; -- bool success; -- -- /* -- * Unmap the skb. -- */ -- rt2x00queue_unmap_skb(entry); -- -- /* -- * Remove the extra tx headroom from the skb. -- */ -- skb_pull(entry->skb, rt2x00dev->extra_tx_headroom); -- -- /* -- * Signal that the TX descriptor is no longer in the skb. -- */ -- skbdesc->flags &= ~SKBDESC_DESC_IN_SKB; -- -- /* -- * Determine the length of 802.11 header. -- */ -- header_length = ieee80211_get_hdrlen_from_skb(entry->skb); -- -- /* -- * Remove L2 padding which was added during -- */ -- if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD)) -- rt2x00queue_remove_l2pad(entry->skb, header_length); -- -- /* -- * If the IV/EIV data was stripped from the frame before it was -- * passed to the hardware, we should now reinsert it again because -- * mac80211 will expect the same data to be present it the -- * frame as it was passed to us. -- */ -- if (rt2x00_has_cap_hw_crypto(rt2x00dev)) -- rt2x00crypto_tx_insert_iv(entry->skb, header_length); -- -- /* -- * Send frame to debugfs immediately, after this call is completed -- * we are going to overwrite the skb->cb array. -- */ -- rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry); -- -- /* -- * Determine if the frame has been successfully transmitted and -- * remove BARs from our check list while checking for their -- * TX status. -- */ -- success = -- rt2x00lib_txdone_bar_status(entry) || -- test_bit(TXDONE_SUCCESS, &txdesc->flags) || -- test_bit(TXDONE_UNKNOWN, &txdesc->flags); -- -- /* -- * Update TX statistics. -- */ -- rt2x00dev->link.qual.tx_success += success; -- rt2x00dev->link.qual.tx_failed += !success; -+ int i; - - rate_idx = skbdesc->tx_rate_idx; - rate_flags = skbdesc->tx_rate_flags; -@@ -448,6 +389,76 @@ void rt2x00lib_txdone(struct queue_entry - else - rt2x00dev->low_level_stats.dot11RTSFailureCount++; - } -+} -+ -+void rt2x00lib_txdone(struct queue_entry *entry, -+ struct txdone_entry_desc *txdesc) -+{ -+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; -+ struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); -+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); -+ u8 skbdesc_flags = skbdesc->flags; -+ unsigned int header_length; -+ bool success; -+ -+ /* -+ * Unmap the skb. -+ */ -+ rt2x00queue_unmap_skb(entry); -+ -+ /* -+ * Remove the extra tx headroom from the skb. -+ */ -+ skb_pull(entry->skb, rt2x00dev->extra_tx_headroom); -+ -+ /* -+ * Signal that the TX descriptor is no longer in the skb. -+ */ -+ skbdesc->flags &= ~SKBDESC_DESC_IN_SKB; -+ -+ /* -+ * Determine the length of 802.11 header. -+ */ -+ header_length = ieee80211_get_hdrlen_from_skb(entry->skb); -+ -+ /* -+ * Remove L2 padding which was added during -+ */ -+ if (rt2x00_has_cap_flag(rt2x00dev, REQUIRE_L2PAD)) -+ rt2x00queue_remove_l2pad(entry->skb, header_length); -+ -+ /* -+ * If the IV/EIV data was stripped from the frame before it was -+ * passed to the hardware, we should now reinsert it again because -+ * mac80211 will expect the same data to be present it the -+ * frame as it was passed to us. -+ */ -+ if (rt2x00_has_cap_hw_crypto(rt2x00dev)) -+ rt2x00crypto_tx_insert_iv(entry->skb, header_length); -+ -+ /* -+ * Send frame to debugfs immediately, after this call is completed -+ * we are going to overwrite the skb->cb array. -+ */ -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry); -+ -+ /* -+ * Determine if the frame has been successfully transmitted and -+ * remove BARs from our check list while checking for their -+ * TX status. -+ */ -+ success = -+ rt2x00lib_txdone_bar_status(entry) || -+ test_bit(TXDONE_SUCCESS, &txdesc->flags) || -+ test_bit(TXDONE_UNKNOWN, &txdesc->flags); -+ -+ /* -+ * Update TX statistics. -+ */ -+ rt2x00dev->link.qual.tx_success += success; -+ rt2x00dev->link.qual.tx_failed += !success; -+ -+ rt2x00lib_fill_tx_status(rt2x00dev, tx_info, skbdesc, txdesc, success); - - /* - * Only send the status report to mac80211 when it's a frame diff --git a/package/kernel/mac80211/patches/020-11-rt2x00-separte-clearing-entry-from-rt2x00lib_txdone.patch b/package/kernel/mac80211/patches/020-11-rt2x00-separte-clearing-entry-from-rt2x00lib_txdone.patch deleted file mode 100644 index e1359397ba..0000000000 --- a/package/kernel/mac80211/patches/020-11-rt2x00-separte-clearing-entry-from-rt2x00lib_txdone.patch +++ /dev/null @@ -1,83 +0,0 @@ -From 56646adf9cd60b488ddc5633a2d9aa1f30efa5db Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 15 Feb 2017 10:25:07 +0100 -Subject: [PATCH 11/19] rt2x00: separte clearing entry from rt2x00lib_txdone - -This makes rt2x00lib_txdone a bit simpler and will allow to reuse -code in different variant of txdone which I'm preparing. - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 51 +++++++++++++++----------- - 1 file changed, 29 insertions(+), 22 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -391,6 +391,32 @@ static void rt2x00lib_fill_tx_status(str - } - } - -+static void rt2x00lib_clear_entry(struct rt2x00_dev *rt2x00dev, -+ struct queue_entry *entry) -+{ -+ /* -+ * Make this entry available for reuse. -+ */ -+ entry->skb = NULL; -+ entry->flags = 0; -+ -+ rt2x00dev->ops->lib->clear_entry(entry); -+ -+ rt2x00queue_index_inc(entry, Q_INDEX_DONE); -+ -+ /* -+ * If the data queue was below the threshold before the txdone -+ * handler we must make sure the packet queue in the mac80211 stack -+ * is reenabled when the txdone handler has finished. This has to be -+ * serialized with rt2x00mac_tx(), otherwise we can wake up queue -+ * before it was stopped. -+ */ -+ spin_lock_bh(&entry->queue->tx_lock); -+ if (!rt2x00queue_threshold(entry->queue)) -+ rt2x00queue_unpause_queue(entry->queue); -+ spin_unlock_bh(&entry->queue->tx_lock); -+} -+ - void rt2x00lib_txdone(struct queue_entry *entry, - struct txdone_entry_desc *txdesc) - { -@@ -471,30 +497,11 @@ void rt2x00lib_txdone(struct queue_entry - ieee80211_tx_status(rt2x00dev->hw, entry->skb); - else - ieee80211_tx_status_ni(rt2x00dev->hw, entry->skb); -- } else -+ } else { - dev_kfree_skb_any(entry->skb); -+ } - -- /* -- * Make this entry available for reuse. -- */ -- entry->skb = NULL; -- entry->flags = 0; -- -- rt2x00dev->ops->lib->clear_entry(entry); -- -- rt2x00queue_index_inc(entry, Q_INDEX_DONE); -- -- /* -- * If the data queue was below the threshold before the txdone -- * handler we must make sure the packet queue in the mac80211 stack -- * is reenabled when the txdone handler has finished. This has to be -- * serialized with rt2x00mac_tx(), otherwise we can wake up queue -- * before it was stopped. -- */ -- spin_lock_bh(&entry->queue->tx_lock); -- if (!rt2x00queue_threshold(entry->queue)) -- rt2x00queue_unpause_queue(entry->queue); -- spin_unlock_bh(&entry->queue->tx_lock); -+ rt2x00lib_clear_entry(rt2x00dev, entry); - } - EXPORT_SYMBOL_GPL(rt2x00lib_txdone); - diff --git a/package/kernel/mac80211/patches/020-12-rt2x00-add-txdone-nomatch-function.patch b/package/kernel/mac80211/patches/020-12-rt2x00-add-txdone-nomatch-function.patch deleted file mode 100644 index 60edb08e75..0000000000 --- a/package/kernel/mac80211/patches/020-12-rt2x00-add-txdone-nomatch-function.patch +++ /dev/null @@ -1,85 +0,0 @@ -From a09305d052166cb489402a63a5d275e954e0b923 Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 15 Feb 2017 10:25:08 +0100 -Subject: [PATCH 12/19] rt2x00: add txdone nomatch function - -This txdone nomatch function will be used when we get status from the HW, -but we could not match it with any sent skb. - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 ++ - drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 50 ++++++++++++++++++++++++++ - 2 files changed, 52 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -1425,6 +1425,8 @@ void rt2x00lib_dmastart(struct queue_ent - void rt2x00lib_dmadone(struct queue_entry *entry); - void rt2x00lib_txdone(struct queue_entry *entry, - struct txdone_entry_desc *txdesc); -+void rt2x00lib_txdone_nomatch(struct queue_entry *entry, -+ struct txdone_entry_desc *txdesc); - void rt2x00lib_txdone_noinfo(struct queue_entry *entry, u32 status); - void rt2x00lib_rxdone(struct queue_entry *entry, gfp_t gfp); - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -417,6 +417,56 @@ static void rt2x00lib_clear_entry(struct - spin_unlock_bh(&entry->queue->tx_lock); - } - -+void rt2x00lib_txdone_nomatch(struct queue_entry *entry, -+ struct txdone_entry_desc *txdesc) -+{ -+ struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; -+ struct skb_frame_desc *skbdesc = get_skb_frame_desc(entry->skb); -+ struct ieee80211_tx_info txinfo = {}; -+ bool success; -+ -+ /* -+ * Unmap the skb. -+ */ -+ rt2x00queue_unmap_skb(entry); -+ -+ /* -+ * Signal that the TX descriptor is no longer in the skb. -+ */ -+ skbdesc->flags &= ~SKBDESC_DESC_IN_SKB; -+ -+ /* -+ * Send frame to debugfs immediately, after this call is completed -+ * we are going to overwrite the skb->cb array. -+ */ -+ rt2x00debug_dump_frame(rt2x00dev, DUMP_FRAME_TXDONE, entry); -+ -+ /* -+ * Determine if the frame has been successfully transmitted and -+ * remove BARs from our check list while checking for their -+ * TX status. -+ */ -+ success = -+ rt2x00lib_txdone_bar_status(entry) || -+ test_bit(TXDONE_SUCCESS, &txdesc->flags); -+ -+ if (!test_bit(TXDONE_UNKNOWN, &txdesc->flags)) { -+ /* -+ * Update TX statistics. -+ */ -+ rt2x00dev->link.qual.tx_success += success; -+ rt2x00dev->link.qual.tx_failed += !success; -+ -+ rt2x00lib_fill_tx_status(rt2x00dev, &txinfo, skbdesc, txdesc, -+ success); -+ ieee80211_tx_status_noskb(rt2x00dev->hw, skbdesc->sta, &txinfo); -+ } -+ -+ dev_kfree_skb_any(entry->skb); -+ rt2x00lib_clear_entry(rt2x00dev, entry); -+} -+EXPORT_SYMBOL_GPL(rt2x00lib_txdone_nomatch); -+ - void rt2x00lib_txdone(struct queue_entry *entry, - struct txdone_entry_desc *txdesc) - { diff --git a/package/kernel/mac80211/patches/020-13-rt2x00-fixup-fill_tx_status-for-nomatch-case.patch b/package/kernel/mac80211/patches/020-13-rt2x00-fixup-fill_tx_status-for-nomatch-case.patch deleted file mode 100644 index a0cc37f491..0000000000 --- a/package/kernel/mac80211/patches/020-13-rt2x00-fixup-fill_tx_status-for-nomatch-case.patch +++ /dev/null @@ -1,47 +0,0 @@ -From ec80ad70d778af7665992672896633ebd3b02ac8 Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 15 Feb 2017 10:25:09 +0100 -Subject: [PATCH 13/19] rt2x00: fixup fill_tx_status for nomatch case - -Add bits rt2x00lib_fill_tx_status() when filling status in nomatch -case and hopefully do not break the function for existing cases. - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00dev.c | 6 +++++- - drivers/net/wireless/ralink/rt2x00/rt2x00queue.h | 1 + - 2 files changed, 6 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -357,6 +357,9 @@ static void rt2x00lib_fill_tx_status(str - if (i < (IEEE80211_TX_MAX_RATES - 1)) - tx_info->status.rates[i].idx = -1; /* terminate */ - -+ if (test_bit(TXDONE_NO_ACK_REQ, &txdesc->flags)) -+ tx_info->flags |= IEEE80211_TX_CTL_NO_ACK; -+ - if (!(tx_info->flags & IEEE80211_TX_CTL_NO_ACK)) { - if (success) - tx_info->flags |= IEEE80211_TX_STAT_ACK; -@@ -375,7 +378,8 @@ static void rt2x00lib_fill_tx_status(str - */ - if (test_bit(TXDONE_AMPDU, &txdesc->flags) || - tx_info->flags & IEEE80211_TX_CTL_AMPDU) { -- tx_info->flags |= IEEE80211_TX_STAT_AMPDU; -+ tx_info->flags |= IEEE80211_TX_STAT_AMPDU | -+ IEEE80211_TX_CTL_AMPDU; - tx_info->status.ampdu_len = 1; - tx_info->status.ampdu_ack_len = success ? 1 : 0; - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.h -@@ -215,6 +215,7 @@ enum txdone_entry_desc_flags { - TXDONE_FAILURE, - TXDONE_EXCESSIVE_RETRY, - TXDONE_AMPDU, -+ TXDONE_NO_ACK_REQ, - }; - - /** diff --git a/package/kernel/mac80211/patches/020-14-rt2x00-use-txdone_nomatch-on-rt2800usb.patch b/package/kernel/mac80211/patches/020-14-rt2x00-use-txdone_nomatch-on-rt2800usb.patch deleted file mode 100644 index 1e23ef7bcb..0000000000 --- a/package/kernel/mac80211/patches/020-14-rt2x00-use-txdone_nomatch-on-rt2800usb.patch +++ /dev/null @@ -1,180 +0,0 @@ -From 293dff78ee058ec1e0b90e05a803c512b6a2097f Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 15 Feb 2017 10:25:10 +0100 -Subject: [PATCH 14/19] rt2x00: use txdone_nomatch on rt2800usb - -If we do not match skb entry, provide tx status via nomatch procedure. - -Currently in that case we do rt2x00lib_txdone_noinfo(TXDONE_NOINFO), -which actually assume that entry->skb was posted without retries and -provide rate saved in skb desc as successful. Patch changed that to -rate read from TX_STAT_FIFO, however still do not provide correct -number of retries. - -On SoC/PCI devices we keep providing status via standard txdone -procedure, no change in those devices, though we should thing about it. - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 31 ++++++++++++++++++++----- - drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 3 ++- - drivers/net/wireless/ralink/rt2x00/rt2800mmio.c | 2 +- - drivers/net/wireless/ralink/rt2x00/rt2800usb.c | 18 ++++++-------- - 4 files changed, 35 insertions(+), 19 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -852,7 +852,8 @@ void rt2800_process_rxwi(struct queue_en - } - EXPORT_SYMBOL_GPL(rt2800_process_rxwi); - --void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi) -+void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi, -+ bool match) - { - struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; - struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; -@@ -860,8 +861,7 @@ void rt2800_txdone_entry(struct queue_en - struct txdone_entry_desc txdesc; - u32 word; - u16 mcs, real_mcs; -- int aggr, ampdu; -- int wcid; -+ int aggr, ampdu, wcid, ack_req; - - /* - * Obtain the status about this packet. -@@ -875,6 +875,7 @@ void rt2800_txdone_entry(struct queue_en - real_mcs = rt2x00_get_field32(status, TX_STA_FIFO_MCS); - aggr = rt2x00_get_field32(status, TX_STA_FIFO_TX_AGGRE); - wcid = rt2x00_get_field32(status, TX_STA_FIFO_WCID); -+ ack_req = rt2x00_get_field32(status, TX_STA_FIFO_TX_ACK_REQUIRED); - - /* - * If a frame was meant to be sent as a single non-aggregated MPDU -@@ -891,8 +892,12 @@ void rt2800_txdone_entry(struct queue_en - * Hence, replace the requested rate with the real tx rate to not - * confuse the rate control algortihm by providing clearly wrong - * data. -- */ -- if (unlikely(aggr == 1 && ampdu == 0 && real_mcs != mcs)) { -+ * -+ * FIXME: if we do not find matching entry, we tell that frame was -+ * posted without any retries. We need to find a way to fix that -+ * and provide retry count. -+ */ -+ if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) { - skbdesc->tx_rate_idx = real_mcs; - mcs = real_mcs; - } -@@ -900,6 +905,9 @@ void rt2800_txdone_entry(struct queue_en - if (aggr == 1 || ampdu == 1) - __set_bit(TXDONE_AMPDU, &txdesc.flags); - -+ if (!ack_req) -+ __set_bit(TXDONE_NO_ACK_REQ, &txdesc.flags); -+ - /* - * Ralink has a retry mechanism using a global fallback - * table. We setup this fallback table to try the immediate -@@ -931,7 +939,18 @@ void rt2800_txdone_entry(struct queue_en - if (txdesc.retry) - __set_bit(TXDONE_FALLBACK, &txdesc.flags); - -- rt2x00lib_txdone(entry, &txdesc); -+ if (!match) { -+ /* RCU assures non-null sta will not be freed by mac80211. */ -+ rcu_read_lock(); -+ if (likely(wcid >= WCID_START && wcid <= WCID_END)) -+ skbdesc->sta = drv_data->wcid_to_sta[wcid - WCID_START]; -+ else -+ skbdesc->sta = NULL; -+ rt2x00lib_txdone_nomatch(entry, &txdesc); -+ rcu_read_unlock(); -+ } else { -+ rt2x00lib_txdone(entry, &txdesc); -+ } - } - EXPORT_SYMBOL_GPL(rt2800_txdone_entry); - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -@@ -191,7 +191,8 @@ void rt2800_write_tx_data(struct queue_e - struct txentry_desc *txdesc); - void rt2800_process_rxwi(struct queue_entry *entry, struct rxdone_entry_desc *txdesc); - --void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32* txwi); -+void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi, -+ bool match); - - void rt2800_write_beacon(struct queue_entry *entry, struct txentry_desc *txdesc); - void rt2800_clear_beacon(struct queue_entry *entry); ---- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c -@@ -239,7 +239,7 @@ static bool rt2800mmio_txdone_release_en - { - if (test_bit(ENTRY_DATA_STATUS_SET, &entry->flags)) { - rt2800_txdone_entry(entry, entry->status, -- rt2800mmio_get_txwi(entry)); -+ rt2800mmio_get_txwi(entry), true); - return false; - } - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800usb.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800usb.c -@@ -501,8 +501,7 @@ static int rt2800usb_get_tx_data_len(str - /* - * TX control handlers - */ --static enum txdone_entry_desc_flags --rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg) -+static bool rt2800usb_txdone_entry_check(struct queue_entry *entry, u32 reg) - { - __le32 *txwi; - u32 word; -@@ -515,7 +514,7 @@ rt2800usb_txdone_entry_check(struct queu - * frame. - */ - if (test_bit(ENTRY_DATA_IO_FAILED, &entry->flags)) -- return TXDONE_FAILURE; -+ return false; - - wcid = rt2x00_get_field32(reg, TX_STA_FIFO_WCID); - ack = rt2x00_get_field32(reg, TX_STA_FIFO_TX_ACK_REQUIRED); -@@ -537,10 +536,10 @@ rt2800usb_txdone_entry_check(struct queu - rt2x00_dbg(entry->queue->rt2x00dev, - "TX status report missed for queue %d entry %d\n", - entry->queue->qid, entry->entry_idx); -- return TXDONE_UNKNOWN; -+ return false; - } - -- return TXDONE_SUCCESS; -+ return true; - } - - static void rt2800usb_txdone(struct rt2x00_dev *rt2x00dev) -@@ -549,7 +548,7 @@ static void rt2800usb_txdone(struct rt2x - struct queue_entry *entry; - u32 reg; - u8 qid; -- enum txdone_entry_desc_flags done_status; -+ bool match; - - while (kfifo_get(&rt2x00dev->txstatus_fifo, ®)) { - /* -@@ -574,11 +573,8 @@ static void rt2800usb_txdone(struct rt2x - break; - } - -- done_status = rt2800usb_txdone_entry_check(entry, reg); -- if (likely(done_status == TXDONE_SUCCESS)) -- rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry)); -- else -- rt2x00lib_txdone_noinfo(entry, done_status); -+ match = rt2800usb_txdone_entry_check(entry, reg); -+ rt2800_txdone_entry(entry, reg, rt2800usb_get_txwi(entry), match); - } - } - diff --git a/package/kernel/mac80211/patches/020-15-rt2800-status-based-rate-flags-for-nomatch-case.patch b/package/kernel/mac80211/patches/020-15-rt2800-status-based-rate-flags-for-nomatch-case.patch deleted file mode 100644 index 37838e8895..0000000000 --- a/package/kernel/mac80211/patches/020-15-rt2800-status-based-rate-flags-for-nomatch-case.patch +++ /dev/null @@ -1,81 +0,0 @@ -From 9d7a7a4d2b02bcd30fb5fe4270278212353cc332 Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 15 Feb 2017 10:25:11 +0100 -Subject: [PATCH 15/19] rt2800: status based rate flags for nomatch case - -We use skb_desc->tx_rate_flags from entry as rate[].flags even if -skb does not match status. Patch corrects flags and also fixes -mcs for legacy rates. - -rt2800_rate_from_status() is based on Felix's mt76 -mt76x2_mac_process_tx_rate() function. - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2800.h | 2 ++ - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 35 +++++++++++++++++++++++++- - 2 files changed, 36 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h -@@ -1760,6 +1760,8 @@ - #define TX_STA_FIFO_WCID FIELD32(0x0000ff00) - #define TX_STA_FIFO_SUCCESS_RATE FIELD32(0xffff0000) - #define TX_STA_FIFO_MCS FIELD32(0x007f0000) -+#define TX_STA_FIFO_BW FIELD32(0x00800000) -+#define TX_STA_FIFO_SGI FIELD32(0x01000000) - #define TX_STA_FIFO_PHYMODE FIELD32(0xc0000000) - - /* ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -852,6 +852,39 @@ void rt2800_process_rxwi(struct queue_en - } - EXPORT_SYMBOL_GPL(rt2800_process_rxwi); - -+static void rt2800_rate_from_status(struct skb_frame_desc *skbdesc, -+ u32 status, enum nl80211_band band) -+{ -+ u8 flags = 0; -+ u8 idx = rt2x00_get_field32(status, TX_STA_FIFO_MCS); -+ -+ switch (rt2x00_get_field32(status, TX_STA_FIFO_PHYMODE)) { -+ case RATE_MODE_HT_GREENFIELD: -+ flags |= IEEE80211_TX_RC_GREEN_FIELD; -+ /* fall through */ -+ case RATE_MODE_HT_MIX: -+ flags |= IEEE80211_TX_RC_MCS; -+ break; -+ case RATE_MODE_OFDM: -+ if (band == NL80211_BAND_2GHZ) -+ idx += 4; -+ break; -+ case RATE_MODE_CCK: -+ if (idx >= 8) -+ idx -= 8; -+ break; -+ } -+ -+ if (rt2x00_get_field32(status, TX_STA_FIFO_BW)) -+ flags |= IEEE80211_TX_RC_40_MHZ_WIDTH; -+ -+ if (rt2x00_get_field32(status, TX_STA_FIFO_SGI)) -+ flags |= IEEE80211_TX_RC_SHORT_GI; -+ -+ skbdesc->tx_rate_idx = idx; -+ skbdesc->tx_rate_flags = flags; -+} -+ - void rt2800_txdone_entry(struct queue_entry *entry, u32 status, __le32 *txwi, - bool match) - { -@@ -898,7 +931,7 @@ void rt2800_txdone_entry(struct queue_en - * and provide retry count. - */ - if (unlikely((aggr == 1 && ampdu == 0 && real_mcs != mcs)) || !match) { -- skbdesc->tx_rate_idx = real_mcs; -+ rt2800_rate_from_status(skbdesc, status, rt2x00dev->curr_band); - mcs = real_mcs; - } - diff --git a/package/kernel/mac80211/patches/020-16-rt2800-use-TXOP_BACKOFF-for-probe-frames.patch b/package/kernel/mac80211/patches/020-16-rt2800-use-TXOP_BACKOFF-for-probe-frames.patch deleted file mode 100644 index 7825810cef..0000000000 --- a/package/kernel/mac80211/patches/020-16-rt2800-use-TXOP_BACKOFF-for-probe-frames.patch +++ /dev/null @@ -1,38 +0,0 @@ -From fb47ada8dc3c30c8e7b415da155742b49536c61e Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 15 Feb 2017 10:25:12 +0100 -Subject: [PATCH 16/19] rt2800: use TXOP_BACKOFF for probe frames - -Even if we do not set AMPDU bit in TXWI, device still can aggregate -frame and send it with rate not corresponding to requested. That mean -we can do not sent probe frames with requested rate. To prevent that -use TXOP_BACKOFF for probe frames. - -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00queue.c | 7 ++++--- - 1 file changed, 4 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00queue.c -@@ -372,15 +372,16 @@ static void rt2x00queue_create_tx_descri - - /* - * Determine IFS values -- * - Use TXOP_BACKOFF for management frames except beacons -+ * - Use TXOP_BACKOFF for probe and management frames except beacons - * - Use TXOP_SIFS for fragment bursts - * - Use TXOP_HTTXOP for everything else - * - * Note: rt2800 devices won't use CTS protection (if used) - * for frames not transmitted with TXOP_HTTXOP - */ -- if (ieee80211_is_mgmt(hdr->frame_control) && -- !ieee80211_is_beacon(hdr->frame_control)) -+ if ((ieee80211_is_mgmt(hdr->frame_control) && -+ !ieee80211_is_beacon(hdr->frame_control)) || -+ (tx_info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE)) - txdesc->u.ht.txop = TXOP_BACKOFF; - else if (!(tx_info->flags & IEEE80211_TX_CTL_FIRST_FRAGMENT)) - txdesc->u.ht.txop = TXOP_SIFS; diff --git a/package/kernel/mac80211/patches/020-17-rt2x00-fix-rt2x00debug_dump_frame-comment.patch b/package/kernel/mac80211/patches/020-17-rt2x00-fix-rt2x00debug_dump_frame-comment.patch deleted file mode 100644 index 415bf5b2a6..0000000000 --- a/package/kernel/mac80211/patches/020-17-rt2x00-fix-rt2x00debug_dump_frame-comment.patch +++ /dev/null @@ -1,23 +0,0 @@ -From dd35cc0896faff5ed9d22eac9ea4a1920e2eec0c Mon Sep 17 00:00:00 2001 -From: Stanislaw Gruszka -Date: Wed, 15 Feb 2017 10:25:13 +0100 -Subject: [PATCH 17/19] rt2x00: fix rt2x00debug_dump_frame comment - -Reported-by: Jeroen Roovers -Signed-off-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2x00.h | 2 +- - 1 file changed, 1 insertion(+), 1 deletion(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -1396,7 +1396,7 @@ void rt2x00queue_flush_queues(struct rt2 - * rt2x00debug_dump_frame - Dump a frame to userspace through debugfs. - * @rt2x00dev: Pointer to &struct rt2x00_dev. - * @type: The type of frame that is being dumped. -- * @skb: The skb containing the frame to be dumped. -+ * @entry: The queue entry containing the frame to be dumped. - */ - #ifdef CPTCFG_RT2X00_LIB_DEBUGFS - void rt2x00debug_dump_frame(struct rt2x00_dev *rt2x00dev, diff --git a/package/kernel/mac80211/patches/020-18-rt2x00-fix-TX_PWR_CFG_4-register-definition.patch b/package/kernel/mac80211/patches/020-18-rt2x00-fix-TX_PWR_CFG_4-register-definition.patch deleted file mode 100644 index c6fb7dd2c4..0000000000 --- a/package/kernel/mac80211/patches/020-18-rt2x00-fix-TX_PWR_CFG_4-register-definition.patch +++ /dev/null @@ -1,32 +0,0 @@ -From 5ce33b603063f36272fcfb1b4a5fde69f46eca88 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Thu, 9 Mar 2017 00:54:22 +0100 -Subject: [PATCH 18/19] rt2x00: fix TX_PWR_CFG_4 register definition - -Some of the macros used to describe the TX_PWR_CFG_4 register accidentally -refer to TX_PWR_CFG_3, probably a copy&paste error. Fix that. - -Signed-off-by: Daniel Golle -Acked-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2800.h | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h -@@ -1171,10 +1171,10 @@ - #define TX_PWR_CFG_4_UKNOWN7 FIELD32(0x00000f00) - #define TX_PWR_CFG_4_UKNOWN8 FIELD32(0x0000f000) - /* bits for 3T devices */ --#define TX_PWR_CFG_3_STBC4_CH0 FIELD32(0x0000000f) --#define TX_PWR_CFG_3_STBC4_CH1 FIELD32(0x000000f0) --#define TX_PWR_CFG_3_STBC6_CH0 FIELD32(0x00000f00) --#define TX_PWR_CFG_3_STBC6_CH1 FIELD32(0x0000f000) -+#define TX_PWR_CFG_4_STBC4_CH0 FIELD32(0x0000000f) -+#define TX_PWR_CFG_4_STBC4_CH1 FIELD32(0x000000f0) -+#define TX_PWR_CFG_4_STBC6_CH0 FIELD32(0x00000f00) -+#define TX_PWR_CFG_4_STBC6_CH1 FIELD32(0x0000f000) - - /* - * TX_PIN_CFG: diff --git a/package/kernel/mac80211/patches/020-19-rt2x00-add-support-for-MT7620.patch b/package/kernel/mac80211/patches/020-19-rt2x00-add-support-for-MT7620.patch deleted file mode 100644 index b91e5821cd..0000000000 --- a/package/kernel/mac80211/patches/020-19-rt2x00-add-support-for-MT7620.patch +++ /dev/null @@ -1,2064 +0,0 @@ -From 41977e86c984fcdddb454a3d7887de5d47b5f530 Mon Sep 17 00:00:00 2001 -From: Roman Yeryomin -Date: Tue, 21 Mar 2017 00:43:00 +0100 -Subject: [PATCH 19/19] rt2x00: add support for MT7620 - -Basic support for MT7620 built-in wireless radio was added to -OpenWrt in r41441. It has seen some heavy cleaning and refactoring -since in order to match the Kernel's code quality standards. - -Signed-off-by: Roman Yeryomin -Signed-off-by: Daniel Golle -Acked-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/Kconfig | 2 +- - drivers/net/wireless/ralink/rt2x00/rt2800.h | 177 +++ - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 1421 +++++++++++++++++++++++- - drivers/net/wireless/ralink/rt2x00/rt2800lib.h | 4 + - drivers/net/wireless/ralink/rt2x00/rt2x00.h | 1 + - 5 files changed, 1578 insertions(+), 27 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/Kconfig -+++ b/drivers/net/wireless/ralink/rt2x00/Kconfig -@@ -210,7 +210,7 @@ endif - config RT2800SOC - tristate "Ralink WiSoC support" - depends on m -- depends on SOC_RT288X || SOC_RT305X -+ depends on SOC_RT288X || SOC_RT305X || SOC_MT7620 - select RT2X00_LIB_SOC - select RT2X00_LIB_MMIO - select RT2X00_LIB_CRYPTO ---- a/drivers/net/wireless/ralink/rt2x00/rt2800.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800.h -@@ -79,6 +79,7 @@ - #define RF5372 0x5372 - #define RF5390 0x5390 - #define RF5392 0x5392 -+#define RF7620 0x7620 - - /* - * Chipset revisions. -@@ -639,6 +640,24 @@ - #define RF_CSR_CFG_BUSY FIELD32(0x00020000) - - /* -+ * MT7620 RF registers (reversed order) -+ */ -+#define RF_CSR_CFG_DATA_MT7620 FIELD32(0x0000ff00) -+#define RF_CSR_CFG_REGNUM_MT7620 FIELD32(0x03ff0000) -+#define RF_CSR_CFG_WRITE_MT7620 FIELD32(0x00000010) -+#define RF_CSR_CFG_BUSY_MT7620 FIELD32(0x00000001) -+ -+/* undocumented registers for calibration of new MAC */ -+#define RF_CONTROL0 0x0518 -+#define RF_BYPASS0 0x051c -+#define RF_CONTROL1 0x0520 -+#define RF_BYPASS1 0x0524 -+#define RF_CONTROL2 0x0528 -+#define RF_BYPASS2 0x052c -+#define RF_CONTROL3 0x0530 -+#define RF_BYPASS3 0x0534 -+ -+/* - * EFUSE_CSR: RT30x0 EEPROM - */ - #define EFUSE_CTRL 0x0580 -@@ -1022,6 +1041,16 @@ - #define AUTOWAKEUP_CFG_AUTOWAKE FIELD32(0x00008000) - - /* -+ * MIMO_PS_CFG: MIMO Power-save Configuration -+ */ -+#define MIMO_PS_CFG 0x1210 -+#define MIMO_PS_CFG_MMPS_BB_EN FIELD32(0x00000001) -+#define MIMO_PS_CFG_MMPS_RX_ANT_NUM FIELD32(0x00000006) -+#define MIMO_PS_CFG_MMPS_RF_EN FIELD32(0x00000008) -+#define MIMO_PS_CFG_RX_STBY_POL FIELD32(0x00000010) -+#define MIMO_PS_CFG_RX_RX_STBY0 FIELD32(0x00000020) -+ -+/* - * EDCA_AC0_CFG: - */ - #define EDCA_AC0_CFG 0x1300 -@@ -1095,6 +1124,12 @@ - #define TX_PWR_CFG_0_OFDM6_CH1 FIELD32(0x00f00000) - #define TX_PWR_CFG_0_OFDM12_CH0 FIELD32(0x0f000000) - #define TX_PWR_CFG_0_OFDM12_CH1 FIELD32(0xf0000000) -+/* bits for new 2T devices */ -+#define TX_PWR_CFG_0B_1MBS_2MBS FIELD32(0x000000ff) -+#define TX_PWR_CFG_0B_5MBS_11MBS FIELD32(0x0000ff00) -+#define TX_PWR_CFG_0B_6MBS_9MBS FIELD32(0x00ff0000) -+#define TX_PWR_CFG_0B_12MBS_18MBS FIELD32(0xff000000) -+ - - /* - * TX_PWR_CFG_1: -@@ -1117,6 +1152,11 @@ - #define TX_PWR_CFG_1_MCS0_CH1 FIELD32(0x00f00000) - #define TX_PWR_CFG_1_MCS2_CH0 FIELD32(0x0f000000) - #define TX_PWR_CFG_1_MCS2_CH1 FIELD32(0xf0000000) -+/* bits for new 2T devices */ -+#define TX_PWR_CFG_1B_24MBS_36MBS FIELD32(0x000000ff) -+#define TX_PWR_CFG_1B_48MBS FIELD32(0x0000ff00) -+#define TX_PWR_CFG_1B_MCS0_MCS1 FIELD32(0x00ff0000) -+#define TX_PWR_CFG_1B_MCS2_MCS3 FIELD32(0xff000000) - - /* - * TX_PWR_CFG_2: -@@ -1139,6 +1179,11 @@ - #define TX_PWR_CFG_2_MCS8_CH1 FIELD32(0x00f00000) - #define TX_PWR_CFG_2_MCS10_CH0 FIELD32(0x0f000000) - #define TX_PWR_CFG_2_MCS10_CH1 FIELD32(0xf0000000) -+/* bits for new 2T devices */ -+#define TX_PWR_CFG_2B_MCS4_MCS5 FIELD32(0x000000ff) -+#define TX_PWR_CFG_2B_MCS6_MCS7 FIELD32(0x0000ff00) -+#define TX_PWR_CFG_2B_MCS8_MCS9 FIELD32(0x00ff0000) -+#define TX_PWR_CFG_2B_MCS10_MCS11 FIELD32(0xff000000) - - /* - * TX_PWR_CFG_3: -@@ -1161,6 +1206,11 @@ - #define TX_PWR_CFG_3_STBC0_CH1 FIELD32(0x00f00000) - #define TX_PWR_CFG_3_STBC2_CH0 FIELD32(0x0f000000) - #define TX_PWR_CFG_3_STBC2_CH1 FIELD32(0xf0000000) -+/* bits for new 2T devices */ -+#define TX_PWR_CFG_3B_MCS12_MCS13 FIELD32(0x000000ff) -+#define TX_PWR_CFG_3B_MCS14 FIELD32(0x0000ff00) -+#define TX_PWR_CFG_3B_STBC_MCS0_MCS1 FIELD32(0x00ff0000) -+#define TX_PWR_CFG_3B_STBC_MCS2_MSC3 FIELD32(0xff000000) - - /* - * TX_PWR_CFG_4: -@@ -1175,6 +1225,9 @@ - #define TX_PWR_CFG_4_STBC4_CH1 FIELD32(0x000000f0) - #define TX_PWR_CFG_4_STBC6_CH0 FIELD32(0x00000f00) - #define TX_PWR_CFG_4_STBC6_CH1 FIELD32(0x0000f000) -+/* bits for new 2T devices */ -+#define TX_PWR_CFG_4B_STBC_MCS4_MCS5 FIELD32(0x000000ff) -+#define TX_PWR_CFG_4B_STBC_MCS6 FIELD32(0x0000ff00) - - /* - * TX_PIN_CFG: -@@ -1201,6 +1254,8 @@ - #define TX_PIN_CFG_RFTR_POL FIELD32(0x00020000) - #define TX_PIN_CFG_TRSW_EN FIELD32(0x00040000) - #define TX_PIN_CFG_TRSW_POL FIELD32(0x00080000) -+#define TX_PIN_CFG_RFRX_EN FIELD32(0x00100000) -+#define TX_PIN_CFG_RFRX_POL FIELD32(0x00200000) - #define TX_PIN_CFG_PA_PE_A2_EN FIELD32(0x01000000) - #define TX_PIN_CFG_PA_PE_G2_EN FIELD32(0x02000000) - #define TX_PIN_CFG_PA_PE_A2_POL FIELD32(0x04000000) -@@ -1547,6 +1602,95 @@ - #define TX_PWR_CFG_4_EXT_STBC4_CH2 FIELD32(0x0000000f) - #define TX_PWR_CFG_4_EXT_STBC6_CH2 FIELD32(0x00000f00) - -+/* TXn_RF_GAIN_CORRECT: RF Gain Correction for each RF_ALC[3:2] -+ * Unit: 0.1 dB, Range: -3.2 dB to 3.1 dB -+ */ -+#define TX0_RF_GAIN_CORRECT 0x13a0 -+#define TX0_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f) -+#define TX0_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00) -+#define TX0_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000) -+#define TX0_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000) -+ -+#define TX1_RF_GAIN_CORRECT 0x13a4 -+#define TX1_RF_GAIN_CORRECT_GAIN_CORR_0 FIELD32(0x0000003f) -+#define TX1_RF_GAIN_CORRECT_GAIN_CORR_1 FIELD32(0x00003f00) -+#define TX1_RF_GAIN_CORRECT_GAIN_CORR_2 FIELD32(0x003f0000) -+#define TX1_RF_GAIN_CORRECT_GAIN_CORR_3 FIELD32(0x3f000000) -+ -+/* TXn_RF_GAIN_ATTEN: TXn RF Gain Attenuation Level -+ * Format: 7-bit, signed value -+ * Unit: 0.5 dB, Range: -20 dB to -5 dB -+ */ -+#define TX0_RF_GAIN_ATTEN 0x13a8 -+#define TX0_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f) -+#define TX0_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00) -+#define TX0_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000) -+#define TX0_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000) -+#define TX1_RF_GAIN_ATTEN 0x13ac -+#define TX1_RF_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000007f) -+#define TX1_RF_GAIN_ATTEN_LEVEL_1 FIELD32(0x00007f00) -+#define TX1_RF_GAIN_ATTEN_LEVEL_2 FIELD32(0x007f0000) -+#define TX1_RF_GAIN_ATTEN_LEVEL_3 FIELD32(0x7f000000) -+ -+/* TX_ALC_CFG_0: TX Automatic Level Control Configuration 0 -+ * TX_ALC_LIMIT_n: TXn upper limit -+ * TX_ALC_CH_INIT_n: TXn channel initial transmission gain -+ * Unit: 0.5 dB, Range: 0 to 23.5 dB -+ */ -+#define TX_ALC_CFG_0 0x13b0 -+#define TX_ALC_CFG_0_CH_INIT_0 FIELD32(0x0000003f) -+#define TX_ALC_CFG_0_CH_INIT_1 FIELD32(0x00003f00) -+#define TX_ALC_CFG_0_LIMIT_0 FIELD32(0x003f0000) -+#define TX_ALC_CFG_0_LIMIT_1 FIELD32(0x3f000000) -+ -+/* TX_ALC_CFG_1: TX Automatic Level Control Configuration 1 -+ * TX_TEMP_COMP: TX Power Temperature Compensation -+ * Unit: 0.5 dB, Range: -10 dB to 10 dB -+ * TXn_GAIN_FINE: TXn Gain Fine Adjustment -+ * Unit: 0.1 dB, Range: -0.8 dB to 0.7 dB -+ * RF_TOS_DLY: Sets the RF_TOS_EN assertion delay after -+ * deassertion of PA_PE. -+ * Unit: 0.25 usec -+ * TXn_RF_GAIN_ATTEN: TXn RF gain attentuation selector -+ * RF_TOS_TIMEOUT: time-out value for RF_TOS_ENABLE -+ * deassertion if RF_TOS_DONE is missing. -+ * Unit: 0.25 usec -+ * RF_TOS_ENABLE: TX offset calibration enable -+ * ROS_BUSY_EN: RX offset calibration busy enable -+ */ -+#define TX_ALC_CFG_1 0x13b4 -+#define TX_ALC_CFG_1_TX_TEMP_COMP FIELD32(0x0000003f) -+#define TX_ALC_CFG_1_TX0_GAIN_FINE FIELD32(0x00000f00) -+#define TX_ALC_CFG_1_TX1_GAIN_FINE FIELD32(0x0000f000) -+#define TX_ALC_CFG_1_RF_TOS_DLY FIELD32(0x00070000) -+#define TX_ALC_CFG_1_TX0_RF_GAIN_ATTEN FIELD32(0x00300000) -+#define TX_ALC_CFG_1_TX1_RF_GAIN_ATTEN FIELD32(0x00c00000) -+#define TX_ALC_CFG_1_RF_TOS_TIMEOUT FIELD32(0x3f000000) -+#define TX_ALC_CFG_1_RF_TOS_ENABLE FIELD32(0x40000000) -+#define TX_ALC_CFG_1_ROS_BUSY_EN FIELD32(0x80000000) -+ -+/* TXn_BB_GAIN_ATTEN: TXn RF Gain Attenuation Level -+ * Format: 5-bit signed values -+ * Unit: 0.5 dB, Range: -8 dB to 7 dB -+ */ -+#define TX0_BB_GAIN_ATTEN 0x13c0 -+#define TX0_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f) -+#define TX0_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00) -+#define TX0_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000) -+#define TX0_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000) -+#define TX1_BB_GAIN_ATTEN 0x13c4 -+#define TX1_BB_GAIN_ATTEN_LEVEL_0 FIELD32(0x0000001f) -+#define TX1_BB_GAIN_ATTEN_LEVEL_1 FIELD32(0x00001f00) -+#define TX1_BB_GAIN_ATTEN_LEVEL_2 FIELD32(0x001f0000) -+#define TX1_BB_GAIN_ATTEN_LEVEL_3 FIELD32(0x1f000000) -+ -+/* TX_ALC_VGA3: TX Automatic Level Correction Variable Gain Amplifier 3 */ -+#define TX_ALC_VGA3 0x13c8 -+#define TX_ALC_VGA3_TX0_ALC_VGA3 FIELD32(0x0000001f) -+#define TX_ALC_VGA3_TX1_ALC_VGA3 FIELD32(0x00001f00) -+#define TX_ALC_VGA3_TX0_ALC_VGA2 FIELD32(0x001f0000) -+#define TX_ALC_VGA3_TX1_ALC_VGA2 FIELD32(0x1f000000) -+ - /* TX_PWR_CFG_7 */ - #define TX_PWR_CFG_7 0x13d4 - #define TX_PWR_CFG_7_OFDM54_CH0 FIELD32(0x0000000f) -@@ -1555,6 +1699,10 @@ - #define TX_PWR_CFG_7_MCS7_CH0 FIELD32(0x000f0000) - #define TX_PWR_CFG_7_MCS7_CH1 FIELD32(0x00f00000) - #define TX_PWR_CFG_7_MCS7_CH2 FIELD32(0x0f000000) -+/* bits for new 2T devices */ -+#define TX_PWR_CFG_7B_54MBS FIELD32(0x000000ff) -+#define TX_PWR_CFG_7B_MCS7 FIELD32(0x00ff0000) -+ - - /* TX_PWR_CFG_8 */ - #define TX_PWR_CFG_8 0x13d8 -@@ -1564,12 +1712,17 @@ - #define TX_PWR_CFG_8_MCS23_CH0 FIELD32(0x000f0000) - #define TX_PWR_CFG_8_MCS23_CH1 FIELD32(0x00f00000) - #define TX_PWR_CFG_8_MCS23_CH2 FIELD32(0x0f000000) -+/* bits for new 2T devices */ -+#define TX_PWR_CFG_8B_MCS15 FIELD32(0x000000ff) -+ - - /* TX_PWR_CFG_9 */ - #define TX_PWR_CFG_9 0x13dc - #define TX_PWR_CFG_9_STBC7_CH0 FIELD32(0x0000000f) - #define TX_PWR_CFG_9_STBC7_CH1 FIELD32(0x000000f0) - #define TX_PWR_CFG_9_STBC7_CH2 FIELD32(0x00000f00) -+/* bits for new 2T devices */ -+#define TX_PWR_CFG_9B_STBC_MCS7 FIELD32(0x000000ff) - - /* - * RX_FILTER_CFG: RX configuration register. -@@ -2137,11 +2290,14 @@ struct mac_iveiv_entry { - #define RFCSR1_TX1_PD FIELD8(0x20) - #define RFCSR1_RX2_PD FIELD8(0x40) - #define RFCSR1_TX2_PD FIELD8(0x80) -+#define RFCSR1_TX2_EN_MT7620 FIELD8(0x02) - - /* - * RFCSR 2: - */ - #define RFCSR2_RESCAL_EN FIELD8(0x80) -+#define RFCSR2_RX2_EN_MT7620 FIELD8(0x02) -+#define RFCSR2_TX2_EN_MT7620 FIELD8(0x20) - - /* - * RFCSR 3: -@@ -2160,6 +2316,12 @@ struct mac_iveiv_entry { - #define RFCSR3_BIT5 FIELD8(0x20) - - /* -+ * RFCSR 4: -+ * VCOCAL_EN used by MT7620 -+ */ -+#define RFCSR4_VCOCAL_EN FIELD8(0x80) -+ -+/* - * FRCSR 5: - */ - #define RFCSR5_R1 FIELD8(0x0c) -@@ -2214,6 +2376,7 @@ struct mac_iveiv_entry { - */ - #define RFCSR13_TX_POWER FIELD8(0x1f) - #define RFCSR13_DR0 FIELD8(0xe0) -+#define RFCSR13_RDIV_MT7620 FIELD8(0x03) - - /* - * RFCSR 15: -@@ -2224,6 +2387,8 @@ struct mac_iveiv_entry { - * RFCSR 16: - */ - #define RFCSR16_TXMIXER_GAIN FIELD8(0x07) -+#define RFCSR16_RF_PLL_FREQ_SEL_MT7620 FIELD8(0x0F) -+#define RFCSR16_SDM_MODE_MT7620 FIELD8(0xE0) - - /* - * RFCSR 17: -@@ -2236,6 +2401,8 @@ struct mac_iveiv_entry { - /* RFCSR 18 */ - #define RFCSR18_XO_TUNE_BYPASS FIELD8(0x40) - -+/* RFCSR 19 */ -+#define RFCSR19_K FIELD8(0x03) - - /* - * RFCSR 20: -@@ -2246,11 +2413,14 @@ struct mac_iveiv_entry { - * RFCSR 21: - */ - #define RFCSR21_RX_LO2_EN FIELD8(0x08) -+#define RFCSR21_BIT1 FIELD8(0x01) -+#define RFCSR21_BIT8 FIELD8(0x80) - - /* - * RFCSR 22: - */ - #define RFCSR22_BASEBAND_LOOPBACK FIELD8(0x01) -+#define RFCSR22_FREQPLAN_D_MT7620 FIELD8(0x07) - - /* - * RFCSR 23: -@@ -2273,6 +2443,11 @@ struct mac_iveiv_entry { - #define RFCSR27_R4 FIELD8(0x40) - - /* -+ * RFCSR 28: -+ */ -+#define RFCSR28_CH11_HT40 FIELD8(0x04) -+ -+/* - * RFCSR 29: - */ - #define RFCSR29_ADC6_TEST FIELD8(0x01) -@@ -2333,6 +2508,7 @@ struct mac_iveiv_entry { - */ - #define RFCSR42_BIT1 FIELD8(0x01) - #define RFCSR42_BIT4 FIELD8(0x08) -+#define RFCSR42_TX2_EN_MT7620 FIELD8(0x40) - - /* - * RFCSR 49: -@@ -2435,6 +2611,7 @@ enum rt2800_eeprom_word { - EEPROM_TSSI_BOUND_BG5, - EEPROM_TXPOWER_A1, - EEPROM_TXPOWER_A2, -+ EEPROM_TXPOWER_INIT, - EEPROM_TSSI_BOUND_A1, - EEPROM_TSSI_BOUND_A2, - EEPROM_TSSI_BOUND_A3, ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -59,6 +59,9 @@ - rt2800_regbusy_read((__dev), BBP_CSR_CFG, BBP_CSR_CFG_BUSY, (__reg)) - #define WAIT_FOR_RFCSR(__dev, __reg) \ - rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY, (__reg)) -+#define WAIT_FOR_RFCSR_MT7620(__dev, __reg) \ -+ rt2800_regbusy_read((__dev), RF_CSR_CFG, RF_CSR_CFG_BUSY_MT7620, \ -+ (__reg)) - #define WAIT_FOR_RF(__dev, __reg) \ - rt2800_regbusy_read((__dev), RF_CSR_CFG0, RF_CSR_CFG0_BUSY, (__reg)) - #define WAIT_FOR_MCU(__dev, __reg) \ -@@ -150,19 +153,56 @@ static void rt2800_rfcsr_write(struct rt - * Wait until the RFCSR becomes available, afterwards we - * can safely write the new data into the register. - */ -- if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -- reg = 0; -- rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); -- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); -- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); -+ switch (rt2x00dev->chip.rt) { -+ case RT6352: -+ if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_DATA_MT7620, value); -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620, -+ word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 1); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1); -+ -+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); -+ } -+ break; -+ -+ default: -+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_DATA, value); -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 1); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); - -- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); -+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); -+ } -+ break; - } - - mutex_unlock(&rt2x00dev->csr_mutex); - } - -+static void rt2800_rfcsr_write_bank(struct rt2x00_dev *rt2x00dev, const u8 bank, -+ const unsigned int reg, const u8 value) -+{ -+ rt2800_rfcsr_write(rt2x00dev, (reg | (bank << 6)), value); -+} -+ -+static void rt2800_rfcsr_write_chanreg(struct rt2x00_dev *rt2x00dev, -+ const unsigned int reg, const u8 value) -+{ -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, reg, value); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, reg, value); -+} -+ -+static void rt2800_rfcsr_write_dccal(struct rt2x00_dev *rt2x00dev, -+ const unsigned int reg, const u8 value) -+{ -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, reg, value); -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, reg, value); -+} -+ - static void rt2800_rfcsr_read(struct rt2x00_dev *rt2x00dev, - const unsigned int word, u8 *value) - { -@@ -178,22 +218,48 @@ static void rt2800_rfcsr_read(struct rt2 - * doesn't become available in time, reg will be 0xffffffff - * which means we return 0xff to the caller. - */ -- if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -- reg = 0; -- rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -- rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); -- rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); -+ switch (rt2x00dev->chip.rt) { -+ case RT6352: -+ if (WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM_MT7620, -+ word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE_MT7620, 0); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY_MT7620, 1); - -- rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); -+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); - -- WAIT_FOR_RFCSR(rt2x00dev, ®); -- } -+ WAIT_FOR_RFCSR_MT7620(rt2x00dev, ®); -+ } -+ -+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA_MT7620); -+ break; - -- *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); -+ default: -+ if (WAIT_FOR_RFCSR(rt2x00dev, ®)) { -+ reg = 0; -+ rt2x00_set_field32(®, RF_CSR_CFG_REGNUM, word); -+ rt2x00_set_field32(®, RF_CSR_CFG_WRITE, 0); -+ rt2x00_set_field32(®, RF_CSR_CFG_BUSY, 1); -+ -+ rt2800_register_write_lock(rt2x00dev, RF_CSR_CFG, reg); -+ -+ WAIT_FOR_RFCSR(rt2x00dev, ®); -+ } -+ -+ *value = rt2x00_get_field32(reg, RF_CSR_CFG_DATA); -+ break; -+ } - - mutex_unlock(&rt2x00dev->csr_mutex); - } - -+static void rt2800_rfcsr_read_bank(struct rt2x00_dev *rt2x00dev, const u8 bank, -+ const unsigned int reg, u8 *value) -+{ -+ rt2800_rfcsr_read(rt2x00dev, (reg | (bank << 6)), value); -+} -+ - static void rt2800_rf_write(struct rt2x00_dev *rt2x00dev, - const unsigned int word, const u32 value) - { -@@ -250,6 +316,7 @@ static const unsigned int rt2800_eeprom_ - [EEPROM_TSSI_BOUND_BG5] = 0x003b, - [EEPROM_TXPOWER_A1] = 0x003c, - [EEPROM_TXPOWER_A2] = 0x0053, -+ [EEPROM_TXPOWER_INIT] = 0x0068, - [EEPROM_TSSI_BOUND_A1] = 0x006a, - [EEPROM_TSSI_BOUND_A2] = 0x006b, - [EEPROM_TSSI_BOUND_A3] = 0x006c, -@@ -524,6 +591,7 @@ void rt2800_get_txwi_rxwi_size(struct rt - break; - - case RT5592: -+ case RT6352: - *txwi_size = TXWI_DESC_SIZE_5WORDS; - *rxwi_size = RXWI_DESC_SIZE_6WORDS; - break; -@@ -2810,7 +2878,8 @@ static void rt2800_config_channel_rf53xx - rt2800_rfcsr_write(rt2x00dev, 59, - r59_nonbt_rev[idx]); - } else if (rt2x00_rt(rt2x00dev, RT5390) || -- rt2x00_rt(rt2x00dev, RT5392)) { -+ rt2x00_rt(rt2x00dev, RT5392) || -+ rt2x00_rt(rt2x00dev, RT6352)) { - static const char r59_non_bt[] = {0x8f, 0x8f, - 0x8f, 0x8f, 0x8f, 0x8f, 0x8f, 0x8d, - 0x8a, 0x88, 0x88, 0x87, 0x87, 0x86}; -@@ -3104,6 +3173,242 @@ static void rt2800_config_channel_rf55xx - rt2800_bbp_write(rt2x00dev, 196, (rf->channel <= 14) ? 0x19 : 0x7F); - } - -+static void rt2800_config_channel_rf7620(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_conf *conf, -+ struct rf_channel *rf, -+ struct channel_info *info) -+{ -+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; -+ u8 rx_agc_fc, tx_agc_fc; -+ u8 rfcsr; -+ -+ /* Frequeny plan setting */ -+ /* Rdiv setting (set 0x03 if Xtal==20) -+ * R13[1:0] -+ */ -+ rt2800_rfcsr_read(rt2x00dev, 13, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR13_RDIV_MT7620, -+ rt2800_clk_is_20mhz(rt2x00dev) ? 3 : 0); -+ rt2800_rfcsr_write(rt2x00dev, 13, rfcsr); -+ -+ /* N setting -+ * R20[7:0] in rf->rf1 -+ * R21[0] always 0 -+ */ -+ rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr); -+ rfcsr = (rf->rf1 & 0x00ff); -+ rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); -+ -+ rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR21_BIT1, 0); -+ rt2800_rfcsr_write(rt2x00dev, 21, rfcsr); -+ -+ /* K setting (always 0) -+ * R16[3:0] (RF PLL freq selection) -+ */ -+ rt2800_rfcsr_read(rt2x00dev, 16, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR16_RF_PLL_FREQ_SEL_MT7620, 0); -+ rt2800_rfcsr_write(rt2x00dev, 16, rfcsr); -+ -+ /* D setting (always 0) -+ * R22[2:0] (D=15, R22[2:0]=<111>) -+ */ -+ rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR22_FREQPLAN_D_MT7620, 0); -+ rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); -+ -+ /* Ksd setting -+ * Ksd: R17<7:0> in rf->rf2 -+ * R18<7:0> in rf->rf3 -+ * R19<1:0> in rf->rf4 -+ */ -+ rt2800_rfcsr_read(rt2x00dev, 17, &rfcsr); -+ rfcsr = rf->rf2; -+ rt2800_rfcsr_write(rt2x00dev, 17, rfcsr); -+ -+ rt2800_rfcsr_read(rt2x00dev, 18, &rfcsr); -+ rfcsr = rf->rf3; -+ rt2800_rfcsr_write(rt2x00dev, 18, rfcsr); -+ -+ rt2800_rfcsr_read(rt2x00dev, 19, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR19_K, rf->rf4); -+ rt2800_rfcsr_write(rt2x00dev, 19, rfcsr); -+ -+ /* Default: XO=20MHz , SDM mode */ -+ rt2800_rfcsr_read(rt2x00dev, 16, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR16_SDM_MODE_MT7620, 0x80); -+ rt2800_rfcsr_write(rt2x00dev, 16, rfcsr); -+ -+ rt2800_rfcsr_read(rt2x00dev, 21, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR21_BIT8, 1); -+ rt2800_rfcsr_write(rt2x00dev, 21, rfcsr); -+ -+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR1_TX2_EN_MT7620, -+ rt2x00dev->default_ant.tx_chain_num != 1); -+ rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); -+ -+ rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR2_TX2_EN_MT7620, -+ rt2x00dev->default_ant.tx_chain_num != 1); -+ rt2x00_set_field8(&rfcsr, RFCSR2_RX2_EN_MT7620, -+ rt2x00dev->default_ant.rx_chain_num != 1); -+ rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); -+ -+ rt2800_rfcsr_read(rt2x00dev, 42, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR42_TX2_EN_MT7620, -+ rt2x00dev->default_ant.tx_chain_num != 1); -+ rt2800_rfcsr_write(rt2x00dev, 42, rfcsr); -+ -+ /* RF for DC Cal BW */ -+ if (conf_is_ht40(conf)) { -+ rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10); -+ } else { -+ rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x20); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x20); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x20); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x20); -+ } -+ -+ if (conf_is_ht40(conf)) { -+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x08); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x08); -+ } else { -+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x28); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x28); -+ } -+ -+ rt2800_rfcsr_read(rt2x00dev, 28, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR28_CH11_HT40, -+ conf_is_ht40(conf) && (rf->channel == 11)); -+ rt2800_rfcsr_write(rt2x00dev, 28, rfcsr); -+ -+ if (!test_bit(DEVICE_STATE_SCANNING, &rt2x00dev->flags)) { -+ if (conf_is_ht40(conf)) { -+ rx_agc_fc = drv_data->rx_calibration_bw40; -+ tx_agc_fc = drv_data->tx_calibration_bw40; -+ } else { -+ rx_agc_fc = drv_data->rx_calibration_bw20; -+ tx_agc_fc = drv_data->tx_calibration_bw20; -+ } -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= rx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= rx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 6, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= rx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 6, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 7, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= rx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 7, rfcsr); -+ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= tx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= tx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 58, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= tx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 58, rfcsr); -+ rt2800_rfcsr_read_bank(rt2x00dev, 7, 59, &rfcsr); -+ rfcsr &= (~0x3F); -+ rfcsr |= tx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 7, 59, rfcsr); -+ } -+} -+ -+static void rt2800_config_alc(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_channel *chan, -+ int power_level) { -+ u16 eeprom, target_power, max_power; -+ u32 mac_sys_ctrl, mac_status; -+ u32 reg; -+ u8 bbp; -+ int i; -+ -+ /* hardware unit is 0.5dBm, limited to 23.5dBm */ -+ power_level *= 2; -+ if (power_level > 0x2f) -+ power_level = 0x2f; -+ -+ max_power = chan->max_power * 2; -+ if (max_power > 0x2f) -+ max_power = 0x2f; -+ -+ rt2800_register_read(rt2x00dev, TX_ALC_CFG_0, ®); -+ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, power_level); -+ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, power_level); -+ rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_0, max_power); -+ rt2x00_set_field32(®, TX_ALC_CFG_0_LIMIT_1, max_power); -+ -+ rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); -+ if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_INTERNAL_TX_ALC)) { -+ /* init base power by eeprom target power */ -+ rt2800_eeprom_read(rt2x00dev, EEPROM_TXPOWER_INIT, -+ &target_power); -+ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_0, target_power); -+ rt2x00_set_field32(®, TX_ALC_CFG_0_CH_INIT_1, target_power); -+ } -+ rt2800_register_write(rt2x00dev, TX_ALC_CFG_0, reg); -+ -+ rt2800_register_read(rt2x00dev, TX_ALC_CFG_1, ®); -+ rt2x00_set_field32(®, TX_ALC_CFG_1_TX_TEMP_COMP, 0); -+ rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg); -+ -+ /* Save MAC SYS CTRL registers */ -+ rt2800_register_read(rt2x00dev, MAC_SYS_CTRL, &mac_sys_ctrl); -+ /* Disable Tx/Rx */ -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, 0); -+ /* Check MAC Tx/Rx idle */ -+ for (i = 0; i < 10000; i++) { -+ rt2800_register_read(rt2x00dev, MAC_STATUS_CFG, -+ &mac_status); -+ if (mac_status & 0x3) -+ usleep_range(50, 200); -+ else -+ break; -+ } -+ -+ if (i == 10000) -+ rt2x00_warn(rt2x00dev, "Wait MAC Status to MAX !!!\n"); -+ -+ if (chan->center_freq > 2457) { -+ rt2800_bbp_read(rt2x00dev, 30, &bbp); -+ bbp = 0x40; -+ rt2800_bbp_write(rt2x00dev, 30, bbp); -+ rt2800_rfcsr_write(rt2x00dev, 39, 0); -+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) -+ rt2800_rfcsr_write(rt2x00dev, 42, 0xfb); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 42, 0x7b); -+ } else { -+ rt2800_bbp_read(rt2x00dev, 30, &bbp); -+ bbp = 0x1f; -+ rt2800_bbp_write(rt2x00dev, 30, bbp); -+ rt2800_rfcsr_write(rt2x00dev, 39, 0x80); -+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) -+ rt2800_rfcsr_write(rt2x00dev, 42, 0xdb); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); -+ } -+ rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl); -+} -+ - static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev, - const unsigned int word, - const u8 value) -@@ -3228,7 +3533,7 @@ static void rt2800_config_channel(struct - struct channel_info *info) - { - u32 reg; -- unsigned int tx_pin; -+ u32 tx_pin; - u8 bbp, rfcsr; - - info->default_power1 = rt2800_txpower_to_dev(rt2x00dev, rf->channel, -@@ -3273,6 +3578,9 @@ static void rt2800_config_channel(struct - case RF5592: - rt2800_config_channel_rf55xx(rt2x00dev, conf, rf, info); - break; -+ case RF7620: -+ rt2800_config_channel_rf7620(rt2x00dev, conf, rf, info); -+ break; - default: - rt2800_config_channel_rf2xxx(rt2x00dev, conf, rf, info); - } -@@ -3347,7 +3655,8 @@ static void rt2800_config_channel(struct - - if (rf->channel <= 14) { - if (!rt2x00_rt(rt2x00dev, RT5390) && -- !rt2x00_rt(rt2x00dev, RT5392)) { -+ !rt2x00_rt(rt2x00dev, RT5392) && -+ !rt2x00_rt(rt2x00dev, RT6352)) { - if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { - rt2800_bbp_write(rt2x00dev, 82, 0x62); - rt2800_bbp_write(rt2x00dev, 75, 0x46); -@@ -3367,7 +3676,7 @@ static void rt2800_config_channel(struct - rt2800_bbp_write(rt2x00dev, 82, 0x94); - else if (rt2x00_rt(rt2x00dev, RT3593)) - rt2800_bbp_write(rt2x00dev, 82, 0x82); -- else -+ else if (!rt2x00_rt(rt2x00dev, RT6352)) - rt2800_bbp_write(rt2x00dev, 82, 0xf2); - - if (rt2x00_rt(rt2x00dev, RT3593)) -@@ -3388,7 +3697,7 @@ static void rt2800_config_channel(struct - if (rt2x00_rt(rt2x00dev, RT3572)) - rt2800_rfcsr_write(rt2x00dev, 8, 0); - -- tx_pin = 0; -+ rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin); - - switch (rt2x00dev->default_ant.tx_chain_num) { - case 3: -@@ -3437,6 +3746,7 @@ static void rt2800_config_channel(struct - - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFTR_EN, 1); - rt2x00_set_field32(&tx_pin, TX_PIN_CFG_TRSW_EN, 1); -+ rt2x00_set_field32(&tx_pin, TX_PIN_CFG_RFRX_EN, 1); /* mt7620 */ - - rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - -@@ -3495,7 +3805,7 @@ static void rt2800_config_channel(struct - usleep_range(1000, 1500); - } - -- if (rt2x00_rt(rt2x00dev, RT5592)) { -+ if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) { - rt2800_bbp_write(rt2x00dev, 195, 141); - rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a); - -@@ -4182,6 +4492,128 @@ static void rt2800_config_txpower_rt3593 - (unsigned long) regs[i]); - } - -+static void rt2800_config_txpower_rt6352(struct rt2x00_dev *rt2x00dev, -+ struct ieee80211_channel *chan, -+ int power_level) -+{ -+ u32 reg, pwreg; -+ u16 eeprom; -+ u32 data, gdata; -+ u8 t, i; -+ enum nl80211_band band = chan->band; -+ int delta; -+ -+ /* Warn user if bw_comp is set in EEPROM */ -+ delta = rt2800_get_txpower_bw_comp(rt2x00dev, band); -+ -+ if (delta) -+ rt2x00_warn(rt2x00dev, "ignoring EEPROM HT40 power delta: %d\n", -+ delta); -+ -+ /* populate TX_PWR_CFG_0 up to TX_PWR_CFG_4 from EEPROM for HT20, limit -+ * value to 0x3f and replace 0x20 by 0x21 as this is what the vendor -+ * driver does as well, though it looks kinda wrong. -+ * Maybe some misunderstanding of what a signed 8-bit value is? Maybe -+ * the hardware has a problem handling 0x20, and as the code initially -+ * used a fixed offset between HT20 and HT40 rates they had to work- -+ * around that issue and most likely just forgot about it later on. -+ * Maybe we should use rt2800_get_txpower_bw_comp() here as well, -+ * however, the corresponding EEPROM value is not respected by the -+ * vendor driver, so maybe this is rather being taken care of the -+ * TXALC and the driver doesn't need to handle it...? -+ * Though this is all very awkward, just do as they did, as that's what -+ * board vendors expected when they populated the EEPROM... -+ */ -+ for (i = 0; i < 5; i++) { -+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, -+ i * 2, &eeprom); -+ -+ data = eeprom; -+ -+ t = eeprom & 0x3f; -+ if (t == 32) -+ t++; -+ -+ gdata = t; -+ -+ t = (eeprom & 0x3f00) >> 8; -+ if (t == 32) -+ t++; -+ -+ gdata |= (t << 8); -+ -+ rt2800_eeprom_read_from_array(rt2x00dev, EEPROM_TXPOWER_BYRATE, -+ (i * 2) + 1, &eeprom); -+ -+ t = eeprom & 0x3f; -+ if (t == 32) -+ t++; -+ -+ gdata |= (t << 16); -+ -+ t = (eeprom & 0x3f00) >> 8; -+ if (t == 32) -+ t++; -+ -+ gdata |= (t << 24); -+ data |= (eeprom << 16); -+ -+ if (!test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)) { -+ /* HT20 */ -+ if (data != 0xffffffff) -+ rt2800_register_write(rt2x00dev, -+ TX_PWR_CFG_0 + (i * 4), -+ data); -+ } else { -+ /* HT40 */ -+ if (gdata != 0xffffffff) -+ rt2800_register_write(rt2x00dev, -+ TX_PWR_CFG_0 + (i * 4), -+ gdata); -+ } -+ } -+ -+ /* Aparently Ralink ran out of space in the BYRATE calibration section -+ * of the EERPOM which is copied to the corresponding TX_PWR_CFG_x -+ * registers. As recent 2T chips use 8-bit instead of 4-bit values for -+ * power-offsets more space would be needed. Ralink decided to keep the -+ * EEPROM layout untouched and rather have some shared values covering -+ * multiple bitrates. -+ * Populate the registers not covered by the EEPROM in the same way the -+ * vendor driver does. -+ */ -+ -+ /* For OFDM 54MBS use value from OFDM 48MBS */ -+ pwreg = 0; -+ rt2800_register_read(rt2x00dev, TX_PWR_CFG_1, ®); -+ t = rt2x00_get_field32(reg, TX_PWR_CFG_1B_48MBS); -+ rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_54MBS, t); -+ -+ /* For MCS 7 use value from MCS 6 */ -+ rt2800_register_read(rt2x00dev, TX_PWR_CFG_2, ®); -+ t = rt2x00_get_field32(reg, TX_PWR_CFG_2B_MCS6_MCS7); -+ rt2x00_set_field32(&pwreg, TX_PWR_CFG_7B_MCS7, t); -+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_7, pwreg); -+ -+ /* For MCS 15 use value from MCS 14 */ -+ pwreg = 0; -+ rt2800_register_read(rt2x00dev, TX_PWR_CFG_3, ®); -+ t = rt2x00_get_field32(reg, TX_PWR_CFG_3B_MCS14); -+ rt2x00_set_field32(&pwreg, TX_PWR_CFG_8B_MCS15, t); -+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_8, pwreg); -+ -+ /* For STBC MCS 7 use value from STBC MCS 6 */ -+ pwreg = 0; -+ rt2800_register_read(rt2x00dev, TX_PWR_CFG_4, ®); -+ t = rt2x00_get_field32(reg, TX_PWR_CFG_4B_STBC_MCS6); -+ rt2x00_set_field32(&pwreg, TX_PWR_CFG_9B_STBC_MCS7, t); -+ rt2800_register_write(rt2x00dev, TX_PWR_CFG_9, pwreg); -+ -+ rt2800_config_alc(rt2x00dev, chan, power_level); -+ -+ /* TODO: temperature compensation code! */ -+} -+ - /* - * We configure transmit power using MAC TX_PWR_CFG_{0,...,N} registers and - * BBP R1 register. TX_PWR_CFG_X allow to configure per rate TX power values, -@@ -4378,6 +4810,8 @@ static void rt2800_config_txpower(struct - { - if (rt2x00_rt(rt2x00dev, RT3593)) - rt2800_config_txpower_rt3593(rt2x00dev, chan, power_level); -+ else if (rt2x00_rt(rt2x00dev, RT6352)) -+ rt2800_config_txpower_rt6352(rt2x00dev, chan, power_level); - else - rt2800_config_txpower_rt28xx(rt2x00dev, chan, power_level); - } -@@ -4393,6 +4827,7 @@ void rt2800_vco_calibration(struct rt2x0 - { - u32 tx_pin; - u8 rfcsr; -+ unsigned long min_sleep = 0; - - /* - * A voltage-controlled oscillator(VCO) is an electronic oscillator -@@ -4431,6 +4866,15 @@ void rt2800_vco_calibration(struct rt2x0 - rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); - rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); - rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); -+ min_sleep = 1000; -+ break; -+ case RF7620: -+ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); -+ rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); -+ rt2800_rfcsr_read(rt2x00dev, 4, &rfcsr); -+ rt2x00_set_field8(&rfcsr, RFCSR4_VCOCAL_EN, 1); -+ rt2800_rfcsr_write(rt2x00dev, 4, rfcsr); -+ min_sleep = 2000; - break; - default: - WARN_ONCE(1, "Not supported RF chipet %x for VCO recalibration", -@@ -4438,7 +4882,8 @@ void rt2800_vco_calibration(struct rt2x0 - return; - } - -- usleep_range(1000, 1500); -+ if (min_sleep > 0) -+ usleep_range(min_sleep, min_sleep * 2); - - rt2800_register_read(rt2x00dev, TX_PIN_CFG, &tx_pin); - if (rt2x00dev->rf_channel <= 14) { -@@ -4470,6 +4915,42 @@ void rt2800_vco_calibration(struct rt2x0 - } - rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - -+ if (rt2x00_rt(rt2x00dev, RT6352)) { -+ if (rt2x00dev->default_ant.tx_chain_num == 1) { -+ rt2800_bbp_write(rt2x00dev, 91, 0x07); -+ rt2800_bbp_write(rt2x00dev, 95, 0x1A); -+ rt2800_bbp_write(rt2x00dev, 195, 128); -+ rt2800_bbp_write(rt2x00dev, 196, 0xA0); -+ rt2800_bbp_write(rt2x00dev, 195, 170); -+ rt2800_bbp_write(rt2x00dev, 196, 0x12); -+ rt2800_bbp_write(rt2x00dev, 195, 171); -+ rt2800_bbp_write(rt2x00dev, 196, 0x10); -+ } else { -+ rt2800_bbp_write(rt2x00dev, 91, 0x06); -+ rt2800_bbp_write(rt2x00dev, 95, 0x9A); -+ rt2800_bbp_write(rt2x00dev, 195, 128); -+ rt2800_bbp_write(rt2x00dev, 196, 0xE0); -+ rt2800_bbp_write(rt2x00dev, 195, 170); -+ rt2800_bbp_write(rt2x00dev, 196, 0x30); -+ rt2800_bbp_write(rt2x00dev, 195, 171); -+ rt2800_bbp_write(rt2x00dev, 196, 0x30); -+ } -+ -+ if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { -+ rt2800_bbp_write(rt2x00dev, 75, 0x60); -+ rt2800_bbp_write(rt2x00dev, 76, 0x44); -+ rt2800_bbp_write(rt2x00dev, 79, 0x1C); -+ rt2800_bbp_write(rt2x00dev, 80, 0x0C); -+ rt2800_bbp_write(rt2x00dev, 82, 0xB6); -+ } -+ -+ /* On 11A, We should delay and wait RF/BBP to be stable -+ * and the appropriate time should be 1000 micro seconds -+ * 2005/06/05 - On 11G, we also need this delay time. -+ * Otherwise it's difficult to pass the WHQL. -+ */ -+ usleep_range(1000, 1500); -+ } - } - EXPORT_SYMBOL_GPL(rt2800_vco_calibration); - -@@ -4568,7 +5049,8 @@ static u8 rt2800_get_default_vgc(struct - rt2x00_rt(rt2x00dev, RT3593) || - rt2x00_rt(rt2x00dev, RT5390) || - rt2x00_rt(rt2x00dev, RT5392) || -- rt2x00_rt(rt2x00dev, RT5592)) -+ rt2x00_rt(rt2x00dev, RT5592) || -+ rt2x00_rt(rt2x00dev, RT6352)) - vgc = 0x1c + (2 * rt2x00dev->lna_gain); - else - vgc = 0x2e + rt2x00dev->lna_gain; -@@ -4795,7 +5277,8 @@ static int rt2800_init_registers(struct - 0x00000000); - } - } else if (rt2x00_rt(rt2x00dev, RT5390) || -- rt2x00_rt(rt2x00dev, RT5392)) { -+ rt2x00_rt(rt2x00dev, RT5392) || -+ rt2x00_rt(rt2x00dev, RT6352)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); -@@ -4805,6 +5288,24 @@ static int rt2800_init_registers(struct - rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); - } else if (rt2x00_rt(rt2x00dev, RT5350)) { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000404); -+ } else if (rt2x00_rt(rt2x00dev, RT6352)) { -+ rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000401); -+ rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x000C0000); -+ rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); -+ rt2800_register_write(rt2x00dev, MIMO_PS_CFG, 0x00000002); -+ rt2800_register_write(rt2x00dev, TX_PIN_CFG, 0x00150F0F); -+ rt2800_register_write(rt2x00dev, TX_ALC_VGA3, 0x06060606); -+ rt2800_register_write(rt2x00dev, TX0_BB_GAIN_ATTEN, 0x0); -+ rt2800_register_write(rt2x00dev, TX1_BB_GAIN_ATTEN, 0x0); -+ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_ATTEN, 0x6C6C666C); -+ rt2800_register_write(rt2x00dev, TX1_RF_GAIN_ATTEN, 0x6C6C666C); -+ rt2800_register_write(rt2x00dev, TX0_RF_GAIN_CORRECT, -+ 0x3630363A); -+ rt2800_register_write(rt2x00dev, TX1_RF_GAIN_CORRECT, -+ 0x3630363A); -+ rt2800_register_read(rt2x00dev, TX_ALC_CFG_1, ®); -+ rt2x00_set_field32(®, TX_ALC_CFG_1_ROS_BUSY_EN, 0); -+ rt2800_register_write(rt2x00dev, TX_ALC_CFG_1, reg); - } else { - rt2800_register_write(rt2x00dev, TX_SW_CFG0, 0x00000000); - rt2800_register_write(rt2x00dev, TX_SW_CFG1, 0x00080606); -@@ -5786,6 +6287,231 @@ static void rt2800_init_bbp_5592(struct - rt2800_bbp_write(rt2x00dev, 103, 0xc0); - } - -+static void rt2800_bbp_glrt_write(struct rt2x00_dev *rt2x00dev, -+ const u8 reg, const u8 value) -+{ -+ rt2800_bbp_write(rt2x00dev, 195, reg); -+ rt2800_bbp_write(rt2x00dev, 196, value); -+} -+ -+static void rt2800_bbp_dcoc_write(struct rt2x00_dev *rt2x00dev, -+ const u8 reg, const u8 value) -+{ -+ rt2800_bbp_write(rt2x00dev, 158, reg); -+ rt2800_bbp_write(rt2x00dev, 159, value); -+} -+ -+static void rt2800_bbp_dcoc_read(struct rt2x00_dev *rt2x00dev, -+ const u8 reg, u8 *value) -+{ -+ rt2800_bbp_write(rt2x00dev, 158, reg); -+ rt2800_bbp_read(rt2x00dev, 159, value); -+} -+ -+static void rt2800_init_bbp_6352(struct rt2x00_dev *rt2x00dev) -+{ -+ u8 bbp; -+ -+ /* Apply Maximum Likelihood Detection (MLD) for 2 stream case */ -+ rt2800_bbp_read(rt2x00dev, 105, &bbp); -+ rt2x00_set_field8(&bbp, BBP105_MLD, -+ rt2x00dev->default_ant.rx_chain_num == 2); -+ rt2800_bbp_write(rt2x00dev, 105, bbp); -+ -+ /* Avoid data loss and CRC errors */ -+ rt2800_bbp4_mac_if_ctrl(rt2x00dev); -+ -+ /* Fix I/Q swap issue */ -+ rt2800_bbp_read(rt2x00dev, 1, &bbp); -+ bbp |= 0x04; -+ rt2800_bbp_write(rt2x00dev, 1, bbp); -+ -+ /* BBP for G band */ -+ rt2800_bbp_write(rt2x00dev, 3, 0x08); -+ rt2800_bbp_write(rt2x00dev, 4, 0x00); /* rt2800_bbp4_mac_if_ctrl? */ -+ rt2800_bbp_write(rt2x00dev, 6, 0x08); -+ rt2800_bbp_write(rt2x00dev, 14, 0x09); -+ rt2800_bbp_write(rt2x00dev, 15, 0xFF); -+ rt2800_bbp_write(rt2x00dev, 16, 0x01); -+ rt2800_bbp_write(rt2x00dev, 20, 0x06); -+ rt2800_bbp_write(rt2x00dev, 21, 0x00); -+ rt2800_bbp_write(rt2x00dev, 22, 0x00); -+ rt2800_bbp_write(rt2x00dev, 27, 0x00); -+ rt2800_bbp_write(rt2x00dev, 28, 0x00); -+ rt2800_bbp_write(rt2x00dev, 30, 0x00); -+ rt2800_bbp_write(rt2x00dev, 31, 0x48); -+ rt2800_bbp_write(rt2x00dev, 47, 0x40); -+ rt2800_bbp_write(rt2x00dev, 62, 0x00); -+ rt2800_bbp_write(rt2x00dev, 63, 0x00); -+ rt2800_bbp_write(rt2x00dev, 64, 0x00); -+ rt2800_bbp_write(rt2x00dev, 65, 0x2C); -+ rt2800_bbp_write(rt2x00dev, 66, 0x1C); -+ rt2800_bbp_write(rt2x00dev, 67, 0x20); -+ rt2800_bbp_write(rt2x00dev, 68, 0xDD); -+ rt2800_bbp_write(rt2x00dev, 69, 0x10); -+ rt2800_bbp_write(rt2x00dev, 70, 0x05); -+ rt2800_bbp_write(rt2x00dev, 73, 0x18); -+ rt2800_bbp_write(rt2x00dev, 74, 0x0F); -+ rt2800_bbp_write(rt2x00dev, 75, 0x60); -+ rt2800_bbp_write(rt2x00dev, 76, 0x44); -+ rt2800_bbp_write(rt2x00dev, 77, 0x59); -+ rt2800_bbp_write(rt2x00dev, 78, 0x1E); -+ rt2800_bbp_write(rt2x00dev, 79, 0x1C); -+ rt2800_bbp_write(rt2x00dev, 80, 0x0C); -+ rt2800_bbp_write(rt2x00dev, 81, 0x3A); -+ rt2800_bbp_write(rt2x00dev, 82, 0xB6); -+ rt2800_bbp_write(rt2x00dev, 83, 0x9A); -+ rt2800_bbp_write(rt2x00dev, 84, 0x9A); -+ rt2800_bbp_write(rt2x00dev, 86, 0x38); -+ rt2800_bbp_write(rt2x00dev, 88, 0x90); -+ rt2800_bbp_write(rt2x00dev, 91, 0x04); -+ rt2800_bbp_write(rt2x00dev, 92, 0x02); -+ rt2800_bbp_write(rt2x00dev, 95, 0x9A); -+ rt2800_bbp_write(rt2x00dev, 96, 0x00); -+ rt2800_bbp_write(rt2x00dev, 103, 0xC0); -+ rt2800_bbp_write(rt2x00dev, 104, 0x92); -+ /* FIXME BBP105 owerwrite */ -+ rt2800_bbp_write(rt2x00dev, 105, 0x3C); -+ rt2800_bbp_write(rt2x00dev, 106, 0x12); -+ rt2800_bbp_write(rt2x00dev, 109, 0x00); -+ rt2800_bbp_write(rt2x00dev, 134, 0x10); -+ rt2800_bbp_write(rt2x00dev, 135, 0xA6); -+ rt2800_bbp_write(rt2x00dev, 137, 0x04); -+ rt2800_bbp_write(rt2x00dev, 142, 0x30); -+ rt2800_bbp_write(rt2x00dev, 143, 0xF7); -+ rt2800_bbp_write(rt2x00dev, 160, 0xEC); -+ rt2800_bbp_write(rt2x00dev, 161, 0xC4); -+ rt2800_bbp_write(rt2x00dev, 162, 0x77); -+ rt2800_bbp_write(rt2x00dev, 163, 0xF9); -+ rt2800_bbp_write(rt2x00dev, 164, 0x00); -+ rt2800_bbp_write(rt2x00dev, 165, 0x00); -+ rt2800_bbp_write(rt2x00dev, 186, 0x00); -+ rt2800_bbp_write(rt2x00dev, 187, 0x00); -+ rt2800_bbp_write(rt2x00dev, 188, 0x00); -+ rt2800_bbp_write(rt2x00dev, 186, 0x00); -+ rt2800_bbp_write(rt2x00dev, 187, 0x01); -+ rt2800_bbp_write(rt2x00dev, 188, 0x00); -+ rt2800_bbp_write(rt2x00dev, 189, 0x00); -+ -+ rt2800_bbp_write(rt2x00dev, 91, 0x06); -+ rt2800_bbp_write(rt2x00dev, 92, 0x04); -+ rt2800_bbp_write(rt2x00dev, 93, 0x54); -+ rt2800_bbp_write(rt2x00dev, 99, 0x50); -+ rt2800_bbp_write(rt2x00dev, 148, 0x84); -+ rt2800_bbp_write(rt2x00dev, 167, 0x80); -+ rt2800_bbp_write(rt2x00dev, 178, 0xFF); -+ rt2800_bbp_write(rt2x00dev, 106, 0x13); -+ -+ /* BBP for G band GLRT function (BBP_128 ~ BBP_221) */ -+ rt2800_bbp_glrt_write(rt2x00dev, 0, 0x00); -+ rt2800_bbp_glrt_write(rt2x00dev, 1, 0x14); -+ rt2800_bbp_glrt_write(rt2x00dev, 2, 0x20); -+ rt2800_bbp_glrt_write(rt2x00dev, 3, 0x0A); -+ rt2800_bbp_glrt_write(rt2x00dev, 10, 0x16); -+ rt2800_bbp_glrt_write(rt2x00dev, 11, 0x06); -+ rt2800_bbp_glrt_write(rt2x00dev, 12, 0x02); -+ rt2800_bbp_glrt_write(rt2x00dev, 13, 0x07); -+ rt2800_bbp_glrt_write(rt2x00dev, 14, 0x05); -+ rt2800_bbp_glrt_write(rt2x00dev, 15, 0x09); -+ rt2800_bbp_glrt_write(rt2x00dev, 16, 0x20); -+ rt2800_bbp_glrt_write(rt2x00dev, 17, 0x08); -+ rt2800_bbp_glrt_write(rt2x00dev, 18, 0x4A); -+ rt2800_bbp_glrt_write(rt2x00dev, 19, 0x00); -+ rt2800_bbp_glrt_write(rt2x00dev, 20, 0x00); -+ rt2800_bbp_glrt_write(rt2x00dev, 128, 0xE0); -+ rt2800_bbp_glrt_write(rt2x00dev, 129, 0x1F); -+ rt2800_bbp_glrt_write(rt2x00dev, 130, 0x4F); -+ rt2800_bbp_glrt_write(rt2x00dev, 131, 0x32); -+ rt2800_bbp_glrt_write(rt2x00dev, 132, 0x08); -+ rt2800_bbp_glrt_write(rt2x00dev, 133, 0x28); -+ rt2800_bbp_glrt_write(rt2x00dev, 134, 0x19); -+ rt2800_bbp_glrt_write(rt2x00dev, 135, 0x0A); -+ rt2800_bbp_glrt_write(rt2x00dev, 138, 0x16); -+ rt2800_bbp_glrt_write(rt2x00dev, 139, 0x10); -+ rt2800_bbp_glrt_write(rt2x00dev, 140, 0x10); -+ rt2800_bbp_glrt_write(rt2x00dev, 141, 0x1A); -+ rt2800_bbp_glrt_write(rt2x00dev, 142, 0x36); -+ rt2800_bbp_glrt_write(rt2x00dev, 143, 0x2C); -+ rt2800_bbp_glrt_write(rt2x00dev, 144, 0x26); -+ rt2800_bbp_glrt_write(rt2x00dev, 145, 0x24); -+ rt2800_bbp_glrt_write(rt2x00dev, 146, 0x42); -+ rt2800_bbp_glrt_write(rt2x00dev, 147, 0x40); -+ rt2800_bbp_glrt_write(rt2x00dev, 148, 0x30); -+ rt2800_bbp_glrt_write(rt2x00dev, 149, 0x29); -+ rt2800_bbp_glrt_write(rt2x00dev, 150, 0x4C); -+ rt2800_bbp_glrt_write(rt2x00dev, 151, 0x46); -+ rt2800_bbp_glrt_write(rt2x00dev, 152, 0x3D); -+ rt2800_bbp_glrt_write(rt2x00dev, 153, 0x40); -+ rt2800_bbp_glrt_write(rt2x00dev, 154, 0x3E); -+ rt2800_bbp_glrt_write(rt2x00dev, 155, 0x38); -+ rt2800_bbp_glrt_write(rt2x00dev, 156, 0x3D); -+ rt2800_bbp_glrt_write(rt2x00dev, 157, 0x2F); -+ rt2800_bbp_glrt_write(rt2x00dev, 158, 0x3C); -+ rt2800_bbp_glrt_write(rt2x00dev, 159, 0x34); -+ rt2800_bbp_glrt_write(rt2x00dev, 160, 0x2C); -+ rt2800_bbp_glrt_write(rt2x00dev, 161, 0x2F); -+ rt2800_bbp_glrt_write(rt2x00dev, 162, 0x3C); -+ rt2800_bbp_glrt_write(rt2x00dev, 163, 0x35); -+ rt2800_bbp_glrt_write(rt2x00dev, 164, 0x2E); -+ rt2800_bbp_glrt_write(rt2x00dev, 165, 0x2F); -+ rt2800_bbp_glrt_write(rt2x00dev, 166, 0x49); -+ rt2800_bbp_glrt_write(rt2x00dev, 167, 0x41); -+ rt2800_bbp_glrt_write(rt2x00dev, 168, 0x36); -+ rt2800_bbp_glrt_write(rt2x00dev, 169, 0x39); -+ rt2800_bbp_glrt_write(rt2x00dev, 170, 0x30); -+ rt2800_bbp_glrt_write(rt2x00dev, 171, 0x30); -+ rt2800_bbp_glrt_write(rt2x00dev, 172, 0x0E); -+ rt2800_bbp_glrt_write(rt2x00dev, 173, 0x0D); -+ rt2800_bbp_glrt_write(rt2x00dev, 174, 0x28); -+ rt2800_bbp_glrt_write(rt2x00dev, 175, 0x21); -+ rt2800_bbp_glrt_write(rt2x00dev, 176, 0x1C); -+ rt2800_bbp_glrt_write(rt2x00dev, 177, 0x16); -+ rt2800_bbp_glrt_write(rt2x00dev, 178, 0x50); -+ rt2800_bbp_glrt_write(rt2x00dev, 179, 0x4A); -+ rt2800_bbp_glrt_write(rt2x00dev, 180, 0x43); -+ rt2800_bbp_glrt_write(rt2x00dev, 181, 0x50); -+ rt2800_bbp_glrt_write(rt2x00dev, 182, 0x10); -+ rt2800_bbp_glrt_write(rt2x00dev, 183, 0x10); -+ rt2800_bbp_glrt_write(rt2x00dev, 184, 0x10); -+ rt2800_bbp_glrt_write(rt2x00dev, 185, 0x10); -+ rt2800_bbp_glrt_write(rt2x00dev, 200, 0x7D); -+ rt2800_bbp_glrt_write(rt2x00dev, 201, 0x14); -+ rt2800_bbp_glrt_write(rt2x00dev, 202, 0x32); -+ rt2800_bbp_glrt_write(rt2x00dev, 203, 0x2C); -+ rt2800_bbp_glrt_write(rt2x00dev, 204, 0x36); -+ rt2800_bbp_glrt_write(rt2x00dev, 205, 0x4C); -+ rt2800_bbp_glrt_write(rt2x00dev, 206, 0x43); -+ rt2800_bbp_glrt_write(rt2x00dev, 207, 0x2C); -+ rt2800_bbp_glrt_write(rt2x00dev, 208, 0x2E); -+ rt2800_bbp_glrt_write(rt2x00dev, 209, 0x36); -+ rt2800_bbp_glrt_write(rt2x00dev, 210, 0x30); -+ rt2800_bbp_glrt_write(rt2x00dev, 211, 0x6E); -+ -+ /* BBP for G band DCOC function */ -+ rt2800_bbp_dcoc_write(rt2x00dev, 140, 0x0C); -+ rt2800_bbp_dcoc_write(rt2x00dev, 141, 0x00); -+ rt2800_bbp_dcoc_write(rt2x00dev, 142, 0x10); -+ rt2800_bbp_dcoc_write(rt2x00dev, 143, 0x10); -+ rt2800_bbp_dcoc_write(rt2x00dev, 144, 0x10); -+ rt2800_bbp_dcoc_write(rt2x00dev, 145, 0x10); -+ rt2800_bbp_dcoc_write(rt2x00dev, 146, 0x08); -+ rt2800_bbp_dcoc_write(rt2x00dev, 147, 0x40); -+ rt2800_bbp_dcoc_write(rt2x00dev, 148, 0x04); -+ rt2800_bbp_dcoc_write(rt2x00dev, 149, 0x04); -+ rt2800_bbp_dcoc_write(rt2x00dev, 150, 0x08); -+ rt2800_bbp_dcoc_write(rt2x00dev, 151, 0x08); -+ rt2800_bbp_dcoc_write(rt2x00dev, 152, 0x03); -+ rt2800_bbp_dcoc_write(rt2x00dev, 153, 0x03); -+ rt2800_bbp_dcoc_write(rt2x00dev, 154, 0x03); -+ rt2800_bbp_dcoc_write(rt2x00dev, 155, 0x02); -+ rt2800_bbp_dcoc_write(rt2x00dev, 156, 0x40); -+ rt2800_bbp_dcoc_write(rt2x00dev, 157, 0x40); -+ rt2800_bbp_dcoc_write(rt2x00dev, 158, 0x64); -+ rt2800_bbp_dcoc_write(rt2x00dev, 159, 0x64); -+ -+ rt2800_bbp4_mac_if_ctrl(rt2x00dev); -+} -+ - static void rt2800_init_bbp(struct rt2x00_dev *rt2x00dev) - { - unsigned int i; -@@ -5830,6 +6556,9 @@ static void rt2800_init_bbp(struct rt2x0 - case RT5592: - rt2800_init_bbp_5592(rt2x00dev); - return; -+ case RT6352: -+ rt2800_init_bbp_6352(rt2x00dev); -+ break; - } - - for (i = 0; i < EEPROM_BBP_SIZE; i++) { -@@ -6901,6 +7630,615 @@ static void rt2800_init_rfcsr_5592(struc - rt2800_led_open_drain_enable(rt2x00dev); - } - -+static void rt2800_bbp_core_soft_reset(struct rt2x00_dev *rt2x00dev, -+ bool set_bw, bool is_ht40) -+{ -+ u8 bbp_val; -+ -+ rt2800_bbp_read(rt2x00dev, 21, &bbp_val); -+ bbp_val |= 0x1; -+ rt2800_bbp_write(rt2x00dev, 21, bbp_val); -+ usleep_range(100, 200); -+ -+ if (set_bw) { -+ rt2800_bbp_read(rt2x00dev, 4, &bbp_val); -+ rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH, 2 * is_ht40); -+ rt2800_bbp_write(rt2x00dev, 4, bbp_val); -+ usleep_range(100, 200); -+ } -+ -+ rt2800_bbp_read(rt2x00dev, 21, &bbp_val); -+ bbp_val &= (~0x1); -+ rt2800_bbp_write(rt2x00dev, 21, bbp_val); -+ usleep_range(100, 200); -+} -+ -+static int rt2800_rf_lp_config(struct rt2x00_dev *rt2x00dev, bool btxcal) -+{ -+ u8 rf_val; -+ -+ if (btxcal) -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x04); -+ else -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, 0x02); -+ -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, 0x06); -+ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 17, &rf_val); -+ rf_val |= 0x80; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, rf_val); -+ -+ if (btxcal) { -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xC1); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x20); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 3, &rf_val); -+ rf_val &= (~0x3F); -+ rf_val |= 0x3F; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 4, &rf_val); -+ rf_val &= (~0x3F); -+ rf_val |= 0x3F; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, 0x31); -+ } else { -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, 0xF1); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, 0x18); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, 0x02); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 3, &rf_val); -+ rf_val &= (~0x3F); -+ rf_val |= 0x34; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, rf_val); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 4, &rf_val); -+ rf_val &= (~0x3F); -+ rf_val |= 0x34; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, rf_val); -+ } -+ -+ return 0; -+} -+ -+static char rt2800_lp_tx_filter_bw_cal(struct rt2x00_dev *rt2x00dev) -+{ -+ unsigned int cnt; -+ u8 bbp_val; -+ char cal_val; -+ -+ rt2800_bbp_dcoc_write(rt2x00dev, 0, 0x82); -+ -+ cnt = 0; -+ do { -+ usleep_range(500, 2000); -+ rt2800_bbp_read(rt2x00dev, 159, &bbp_val); -+ if (bbp_val == 0x02 || cnt == 20) -+ break; -+ -+ cnt++; -+ } while (cnt < 20); -+ -+ rt2800_bbp_dcoc_read(rt2x00dev, 0x39, &bbp_val); -+ cal_val = bbp_val & 0x7F; -+ if (cal_val >= 0x40) -+ cal_val -= 128; -+ -+ return cal_val; -+} -+ -+static void rt2800_bw_filter_calibration(struct rt2x00_dev *rt2x00dev, -+ bool btxcal) -+{ -+ struct rt2800_drv_data *drv_data = rt2x00dev->drv_data; -+ u8 tx_agc_fc = 0, rx_agc_fc = 0, cmm_agc_fc; -+ u8 filter_target; -+ u8 tx_filter_target_20m = 0x09, tx_filter_target_40m = 0x02; -+ u8 rx_filter_target_20m = 0x27, rx_filter_target_40m = 0x31; -+ int loop = 0, is_ht40, cnt; -+ u8 bbp_val, rf_val; -+ char cal_r32_init, cal_r32_val, cal_diff; -+ u8 saverfb5r00, saverfb5r01, saverfb5r03, saverfb5r04, saverfb5r05; -+ u8 saverfb5r06, saverfb5r07; -+ u8 saverfb5r08, saverfb5r17, saverfb5r18, saverfb5r19, saverfb5r20; -+ u8 saverfb5r37, saverfb5r38, saverfb5r39, saverfb5r40, saverfb5r41; -+ u8 saverfb5r42, saverfb5r43, saverfb5r44, saverfb5r45, saverfb5r46; -+ u8 saverfb5r58, saverfb5r59; -+ u8 savebbp159r0, savebbp159r2, savebbpr23; -+ u32 MAC_RF_CONTROL0, MAC_RF_BYPASS0; -+ -+ /* Save MAC registers */ -+ rt2800_register_read(rt2x00dev, RF_CONTROL0, &MAC_RF_CONTROL0); -+ rt2800_register_read(rt2x00dev, RF_BYPASS0, &MAC_RF_BYPASS0); -+ -+ /* save BBP registers */ -+ rt2800_bbp_read(rt2x00dev, 23, &savebbpr23); -+ -+ rt2800_bbp_dcoc_read(rt2x00dev, 0, &savebbp159r0); -+ rt2800_bbp_dcoc_read(rt2x00dev, 2, &savebbp159r2); -+ -+ /* Save RF registers */ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 0, &saverfb5r00); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 1, &saverfb5r01); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 3, &saverfb5r03); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 4, &saverfb5r04); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 5, &saverfb5r05); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &saverfb5r06); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &saverfb5r07); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 8, &saverfb5r08); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 17, &saverfb5r17); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 18, &saverfb5r18); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 19, &saverfb5r19); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 20, &saverfb5r20); -+ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 37, &saverfb5r37); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 38, &saverfb5r38); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 39, &saverfb5r39); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 40, &saverfb5r40); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 41, &saverfb5r41); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 42, &saverfb5r42); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 43, &saverfb5r43); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 44, &saverfb5r44); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 45, &saverfb5r45); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 46, &saverfb5r46); -+ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &saverfb5r58); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &saverfb5r59); -+ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 0, &rf_val); -+ rf_val |= 0x3; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val); -+ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 1, &rf_val); -+ rf_val |= 0x1; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, rf_val); -+ -+ cnt = 0; -+ do { -+ usleep_range(500, 2000); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 1, &rf_val); -+ if (((rf_val & 0x1) == 0x00) || (cnt == 40)) -+ break; -+ cnt++; -+ } while (cnt < 40); -+ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 0, &rf_val); -+ rf_val &= (~0x3); -+ rf_val |= 0x1; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, rf_val); -+ -+ /* I-3 */ -+ rt2800_bbp_read(rt2x00dev, 23, &bbp_val); -+ bbp_val &= (~0x1F); -+ bbp_val |= 0x10; -+ rt2800_bbp_write(rt2x00dev, 23, bbp_val); -+ -+ do { -+ /* I-4,5,6,7,8,9 */ -+ if (loop == 0) { -+ is_ht40 = false; -+ -+ if (btxcal) -+ filter_target = tx_filter_target_20m; -+ else -+ filter_target = rx_filter_target_20m; -+ } else { -+ is_ht40 = true; -+ -+ if (btxcal) -+ filter_target = tx_filter_target_40m; -+ else -+ filter_target = rx_filter_target_40m; -+ } -+ -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 8, &rf_val); -+ rf_val &= (~0x04); -+ if (loop == 1) -+ rf_val |= 0x4; -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, rf_val); -+ -+ rt2800_bbp_core_soft_reset(rt2x00dev, true, is_ht40); -+ -+ rt2800_rf_lp_config(rt2x00dev, btxcal); -+ if (btxcal) { -+ tx_agc_fc = 0; -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rf_val); -+ rf_val &= (~0x7F); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rf_val); -+ rf_val &= (~0x7F); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val); -+ } else { -+ rx_agc_fc = 0; -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rf_val); -+ rf_val &= (~0x7F); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rf_val); -+ rf_val &= (~0x7F); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val); -+ } -+ -+ usleep_range(1000, 2000); -+ -+ rt2800_bbp_dcoc_read(rt2x00dev, 2, &bbp_val); -+ bbp_val &= (~0x6); -+ rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val); -+ -+ rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40); -+ -+ cal_r32_init = rt2800_lp_tx_filter_bw_cal(rt2x00dev); -+ -+ rt2800_bbp_dcoc_read(rt2x00dev, 2, &bbp_val); -+ bbp_val |= 0x6; -+ rt2800_bbp_dcoc_write(rt2x00dev, 2, bbp_val); -+do_cal: -+ if (btxcal) { -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 58, &rf_val); -+ rf_val &= (~0x7F); -+ rf_val |= tx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, rf_val); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 59, &rf_val); -+ rf_val &= (~0x7F); -+ rf_val |= tx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, rf_val); -+ } else { -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 6, &rf_val); -+ rf_val &= (~0x7F); -+ rf_val |= rx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, rf_val); -+ rt2800_rfcsr_read_bank(rt2x00dev, 5, 7, &rf_val); -+ rf_val &= (~0x7F); -+ rf_val |= rx_agc_fc; -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, rf_val); -+ } -+ -+ usleep_range(500, 1000); -+ -+ rt2800_bbp_core_soft_reset(rt2x00dev, false, is_ht40); -+ -+ cal_r32_val = rt2800_lp_tx_filter_bw_cal(rt2x00dev); -+ -+ cal_diff = cal_r32_init - cal_r32_val; -+ -+ if (btxcal) -+ cmm_agc_fc = tx_agc_fc; -+ else -+ cmm_agc_fc = rx_agc_fc; -+ -+ if (((cal_diff > filter_target) && (cmm_agc_fc == 0)) || -+ ((cal_diff < filter_target) && (cmm_agc_fc == 0x3f))) { -+ if (btxcal) -+ tx_agc_fc = 0; -+ else -+ rx_agc_fc = 0; -+ } else if ((cal_diff <= filter_target) && (cmm_agc_fc < 0x3f)) { -+ if (btxcal) -+ tx_agc_fc++; -+ else -+ rx_agc_fc++; -+ goto do_cal; -+ } -+ -+ if (btxcal) { -+ if (loop == 0) -+ drv_data->tx_calibration_bw20 = tx_agc_fc; -+ else -+ drv_data->tx_calibration_bw40 = tx_agc_fc; -+ } else { -+ if (loop == 0) -+ drv_data->rx_calibration_bw20 = rx_agc_fc; -+ else -+ drv_data->rx_calibration_bw40 = rx_agc_fc; -+ } -+ -+ loop++; -+ } while (loop <= 1); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 0, saverfb5r00); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 1, saverfb5r01); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 3, saverfb5r03); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 4, saverfb5r04); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 5, saverfb5r05); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 6, saverfb5r06); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 7, saverfb5r07); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 8, saverfb5r08); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 17, saverfb5r17); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 18, saverfb5r18); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 19, saverfb5r19); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 20, saverfb5r20); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 37, saverfb5r37); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 38, saverfb5r38); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 39, saverfb5r39); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 40, saverfb5r40); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 41, saverfb5r41); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 42, saverfb5r42); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 43, saverfb5r43); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 44, saverfb5r44); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 45, saverfb5r45); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 46, saverfb5r46); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 58, saverfb5r58); -+ rt2800_rfcsr_write_bank(rt2x00dev, 5, 59, saverfb5r59); -+ -+ rt2800_bbp_write(rt2x00dev, 23, savebbpr23); -+ -+ rt2800_bbp_dcoc_write(rt2x00dev, 0, savebbp159r0); -+ rt2800_bbp_dcoc_write(rt2x00dev, 2, savebbp159r2); -+ -+ rt2800_bbp_read(rt2x00dev, 4, &bbp_val); -+ rt2x00_set_field8(&bbp_val, BBP4_BANDWIDTH, -+ 2 * test_bit(CONFIG_CHANNEL_HT40, &rt2x00dev->flags)); -+ rt2800_bbp_write(rt2x00dev, 4, bbp_val); -+ -+ rt2800_register_write(rt2x00dev, RF_CONTROL0, MAC_RF_CONTROL0); -+ rt2800_register_write(rt2x00dev, RF_BYPASS0, MAC_RF_BYPASS0); -+} -+ -+static void rt2800_init_rfcsr_6352(struct rt2x00_dev *rt2x00dev) -+{ -+ /* Initialize RF central register to default value */ -+ rt2800_rfcsr_write(rt2x00dev, 0, 0x02); -+ rt2800_rfcsr_write(rt2x00dev, 1, 0x03); -+ rt2800_rfcsr_write(rt2x00dev, 2, 0x33); -+ rt2800_rfcsr_write(rt2x00dev, 3, 0xFF); -+ rt2800_rfcsr_write(rt2x00dev, 4, 0x0C); -+ rt2800_rfcsr_write(rt2x00dev, 5, 0x40); -+ rt2800_rfcsr_write(rt2x00dev, 6, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 7, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 8, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 9, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 10, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 11, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 12, rt2x00dev->freq_offset); -+ rt2800_rfcsr_write(rt2x00dev, 13, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 14, 0x40); -+ rt2800_rfcsr_write(rt2x00dev, 15, 0x22); -+ rt2800_rfcsr_write(rt2x00dev, 16, 0x4C); -+ rt2800_rfcsr_write(rt2x00dev, 17, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 18, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 19, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 20, 0xA0); -+ rt2800_rfcsr_write(rt2x00dev, 21, 0x12); -+ rt2800_rfcsr_write(rt2x00dev, 22, 0x07); -+ rt2800_rfcsr_write(rt2x00dev, 23, 0x13); -+ rt2800_rfcsr_write(rt2x00dev, 24, 0xFE); -+ rt2800_rfcsr_write(rt2x00dev, 25, 0x24); -+ rt2800_rfcsr_write(rt2x00dev, 26, 0x7A); -+ rt2800_rfcsr_write(rt2x00dev, 27, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 28, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 29, 0x05); -+ rt2800_rfcsr_write(rt2x00dev, 30, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 31, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 32, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 33, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 34, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 35, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 36, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 37, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 38, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 39, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 40, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 41, 0xD0); -+ rt2800_rfcsr_write(rt2x00dev, 42, 0x5B); -+ rt2800_rfcsr_write(rt2x00dev, 43, 0x00); -+ -+ rt2800_rfcsr_write(rt2x00dev, 11, 0x21); -+ if (rt2800_clk_is_20mhz(rt2x00dev)) -+ rt2800_rfcsr_write(rt2x00dev, 13, 0x03); -+ else -+ rt2800_rfcsr_write(rt2x00dev, 13, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 14, 0x7C); -+ rt2800_rfcsr_write(rt2x00dev, 16, 0x80); -+ rt2800_rfcsr_write(rt2x00dev, 17, 0x99); -+ rt2800_rfcsr_write(rt2x00dev, 18, 0x99); -+ rt2800_rfcsr_write(rt2x00dev, 19, 0x09); -+ rt2800_rfcsr_write(rt2x00dev, 20, 0x50); -+ rt2800_rfcsr_write(rt2x00dev, 21, 0xB0); -+ rt2800_rfcsr_write(rt2x00dev, 22, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 23, 0x06); -+ rt2800_rfcsr_write(rt2x00dev, 24, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 25, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 26, 0x5D); -+ rt2800_rfcsr_write(rt2x00dev, 27, 0x00); -+ rt2800_rfcsr_write(rt2x00dev, 28, 0x61); -+ rt2800_rfcsr_write(rt2x00dev, 29, 0xB5); -+ rt2800_rfcsr_write(rt2x00dev, 43, 0x02); -+ -+ rt2800_rfcsr_write(rt2x00dev, 28, 0x62); -+ rt2800_rfcsr_write(rt2x00dev, 29, 0xAD); -+ rt2800_rfcsr_write(rt2x00dev, 39, 0x80); -+ -+ /* Initialize RF channel register to default value */ -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 0, 0x03); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 1, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 2, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 3, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 4, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 5, 0x08); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 6, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 7, 0x51); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x53); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x16); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x61); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 12, 0x22); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 13, 0x3D); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 15, 0x13); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 16, 0x22); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x27); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 18, 0x02); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x01); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x52); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 22, 0x80); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 23, 0xB3); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 24, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 25, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 26, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 27, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x5C); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0x6B); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 30, 0x6B); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 31, 0x31); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x5D); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 33, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xE6); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 35, 0x55); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 37, 0xBB); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB3); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 39, 0xB3); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 40, 0x03); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 41, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 42, 0x00); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xB3); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xD3); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x07); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x68); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xEF); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1C); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x07); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0xA8); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0x85); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x10); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x07); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6A); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0x85); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x10); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 62, 0x1C); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 63, 0x00); -+ -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 45, 0xC5); -+ -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x47); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x71); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x33); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x0E); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 17, 0x23); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA4); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 20, 0x02); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 21, 0x12); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x1C); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 29, 0xEB); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 32, 0x7D); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 34, 0xD6); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 36, 0x08); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 38, 0xB4); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xB3); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x69); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFF); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x20); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xFF); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x1C); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x20); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xF7); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 61, 0x09); -+ -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 10, 0x51); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x06); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 19, 0xA7); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 28, 0x2C); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x64); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 8, 0x51); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 9, 0x36); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 11, 0x53); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 14, 0x16); -+ -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x6C); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFC); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 49, 0x1F); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x27); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 59, 0x6B); -+ -+ /* Initialize RF channel register for DRQFN */ -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 43, 0xD3); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xE3); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xE5); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x28); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x68); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xF7); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 58, 0x02); -+ rt2800_rfcsr_write_chanreg(rt2x00dev, 60, 0xC7); -+ -+ /* Initialize RF DC calibration register to default value */ -+ rt2800_rfcsr_write_dccal(rt2x00dev, 0, 0x47); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 1, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 2, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 6, 0x10); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 7, 0x10); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 8, 0x04); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 9, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 10, 0x07); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 11, 0x01); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 12, 0x07); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 13, 0x07); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 14, 0x07); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 15, 0x20); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 16, 0x22); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 18, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 19, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 20, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 21, 0xF1); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 22, 0x11); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 23, 0x02); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 24, 0x41); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 25, 0x20); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 26, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 27, 0xD7); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 28, 0xA2); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 29, 0x20); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 30, 0x49); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 31, 0x20); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 32, 0x04); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 33, 0xF1); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 34, 0xA1); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 35, 0x01); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 41, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 42, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 43, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 44, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 45, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 46, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 47, 0x3E); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 48, 0x3D); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 49, 0x3E); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 50, 0x3D); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 51, 0x3E); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 52, 0x3D); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 53, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 54, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 55, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 56, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 57, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 58, 0x10); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 59, 0x10); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 60, 0x0A); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 61, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 62, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 63, 0x00); -+ -+ rt2800_rfcsr_write_dccal(rt2x00dev, 3, 0x08); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 4, 0x04); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x20); -+ -+ rt2800_rfcsr_write_dccal(rt2x00dev, 5, 0x00); -+ rt2800_rfcsr_write_dccal(rt2x00dev, 17, 0x7C); -+ -+ rt2800_bw_filter_calibration(rt2x00dev, true); -+ rt2800_bw_filter_calibration(rt2x00dev, false); -+} -+ - static void rt2800_init_rfcsr(struct rt2x00_dev *rt2x00dev) - { - if (rt2800_is_305x_soc(rt2x00dev)) { -@@ -6941,6 +8279,9 @@ static void rt2800_init_rfcsr(struct rt2 - case RT5592: - rt2800_init_rfcsr_5592(rt2x00dev); - break; -+ case RT6352: -+ rt2800_init_rfcsr_6352(rt2x00dev); -+ break; - } - } - -@@ -7307,7 +8648,8 @@ static int rt2800_init_eeprom(struct rt2 - */ - if (rt2x00_rt(rt2x00dev, RT3290) || - rt2x00_rt(rt2x00dev, RT5390) || -- rt2x00_rt(rt2x00dev, RT5392)) -+ rt2x00_rt(rt2x00dev, RT5392) || -+ rt2x00_rt(rt2x00dev, RT6352)) - rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf); - else if (rt2x00_rt(rt2x00dev, RT3352)) - rf = RF3322; -@@ -7339,6 +8681,7 @@ static int rt2800_init_eeprom(struct rt2 - case RF5390: - case RF5392: - case RF5592: -+ case RF7620: - break; - default: - rt2x00_err(rt2x00dev, "Invalid RF chipset 0x%04x detected\n", -@@ -7746,6 +9089,23 @@ static const struct rf_channel rf_vals_5 - {196, 83, 0, 12, 1}, - }; - -+static const struct rf_channel rf_vals_7620[] = { -+ {1, 0x50, 0x99, 0x99, 1}, -+ {2, 0x50, 0x44, 0x44, 2}, -+ {3, 0x50, 0xEE, 0xEE, 2}, -+ {4, 0x50, 0x99, 0x99, 3}, -+ {5, 0x51, 0x44, 0x44, 0}, -+ {6, 0x51, 0xEE, 0xEE, 0}, -+ {7, 0x51, 0x99, 0x99, 1}, -+ {8, 0x51, 0x44, 0x44, 2}, -+ {9, 0x51, 0xEE, 0xEE, 2}, -+ {10, 0x51, 0x99, 0x99, 3}, -+ {11, 0x52, 0x44, 0x44, 0}, -+ {12, 0x52, 0xEE, 0xEE, 0}, -+ {13, 0x52, 0x99, 0x99, 1}, -+ {14, 0x52, 0x33, 0x33, 3}, -+}; -+ - static int rt2800_probe_hw_mode(struct rt2x00_dev *rt2x00dev) - { - struct hw_mode_spec *spec = &rt2x00dev->spec; -@@ -7849,6 +9209,11 @@ static int rt2800_probe_hw_mode(struct r - spec->channels = rf_vals_3x; - break; - -+ case RF7620: -+ spec->num_channels = ARRAY_SIZE(rf_vals_7620); -+ spec->channels = rf_vals_7620; -+ break; -+ - case RF3052: - case RF3053: - spec->num_channels = ARRAY_SIZE(rf_vals_3x); -@@ -7980,6 +9345,7 @@ static int rt2800_probe_hw_mode(struct r - case RF5390: - case RF5392: - case RF5592: -+ case RF7620: - __set_bit(CAPABILITY_VCO_RECALIBRATION, &rt2x00dev->cap_flags); - break; - } -@@ -8024,6 +9390,9 @@ static int rt2800_probe_rt(struct rt2x00 - return -ENODEV; - } - -+ if (rt == RT5390 && rt2x00_is_soc(rt2x00dev)) -+ rt = RT6352; -+ - rt2x00_set_rt(rt2x00dev, rt, rev); - - return 0; ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.h -@@ -33,6 +33,10 @@ - struct rt2800_drv_data { - u8 calibration_bw20; - u8 calibration_bw40; -+ char rx_calibration_bw20; -+ char rx_calibration_bw40; -+ char tx_calibration_bw20; -+ char tx_calibration_bw40; - u8 bbp25; - u8 bbp26; - u8 txmixer_gain_24g; ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -174,6 +174,7 @@ struct rt2x00_chip { - #define RT5390 0x5390 /* 2.4GHz */ - #define RT5392 0x5392 /* 2.4GHz */ - #define RT5592 0x5592 -+#define RT6352 0x6352 /* WSOC 2.4GHz */ - - u16 rf; - u16 rev; diff --git a/package/kernel/mac80211/patches/020-20-rt2x00-reverse-external-PA-capability-flag-logic.patch b/package/kernel/mac80211/patches/020-20-rt2x00-reverse-external-PA-capability-flag-logic.patch deleted file mode 100644 index 7994456de7..0000000000 --- a/package/kernel/mac80211/patches/020-20-rt2x00-reverse-external-PA-capability-flag-logic.patch +++ /dev/null @@ -1,121 +0,0 @@ -From 1f242a3de702d5a19c479685d35b050837122724 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 10 Apr 2017 15:29:45 +0200 -Subject: [PATCH] rt2x00: reverse external PA capability flag logic - -Consequently refer to external PA instead of inverting the logic and -use an internal PA capability flag which is a bit confusing. -Currently this is used for Rt3352 only, but MT7620A also allows for an -external PA which will be supported by a follow up patch. - -Signed-off-by: Daniel Golle -Acked-by: Stanislaw Gruszka -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 40 +++++++++++++------------- - drivers/net/wireless/ralink/rt2x00/rt2x00.h | 4 +-- - 2 files changed, 22 insertions(+), 22 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -7014,9 +7014,9 @@ static void rt2800_init_rfcsr_3290(struc - - static void rt2800_init_rfcsr_3352(struct rt2x00_dev *rt2x00dev) - { -- int tx0_int_pa = test_bit(CAPABILITY_INTERNAL_PA_TX0, -+ int tx0_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX0, - &rt2x00dev->cap_flags); -- int tx1_int_pa = test_bit(CAPABILITY_INTERNAL_PA_TX1, -+ int tx1_ext_pa = test_bit(CAPABILITY_EXTERNAL_PA_TX1, - &rt2x00dev->cap_flags); - u8 rfcsr; - -@@ -7056,9 +7056,9 @@ static void rt2800_init_rfcsr_3352(struc - rt2800_rfcsr_write(rt2x00dev, 32, 0x80); - rt2800_rfcsr_write(rt2x00dev, 33, 0x00); - rfcsr = 0x01; -- if (!tx0_int_pa) -+ if (tx0_ext_pa) - rt2x00_set_field8(&rfcsr, RFCSR34_TX0_EXT_PA, 1); -- if (!tx1_int_pa) -+ if (tx1_ext_pa) - rt2x00_set_field8(&rfcsr, RFCSR34_TX1_EXT_PA, 1); - rt2800_rfcsr_write(rt2x00dev, 34, rfcsr); - rt2800_rfcsr_write(rt2x00dev, 35, 0x03); -@@ -7068,13 +7068,13 @@ static void rt2800_init_rfcsr_3352(struc - rt2800_rfcsr_write(rt2x00dev, 39, 0xc5); - rt2800_rfcsr_write(rt2x00dev, 40, 0x33); - rfcsr = 0x52; -- if (tx0_int_pa) { -+ if (!tx0_ext_pa) { - rt2x00_set_field8(&rfcsr, RFCSR41_BIT1, 1); - rt2x00_set_field8(&rfcsr, RFCSR41_BIT4, 1); - } - rt2800_rfcsr_write(rt2x00dev, 41, rfcsr); - rfcsr = 0x52; -- if (tx1_int_pa) { -+ if (!tx1_ext_pa) { - rt2x00_set_field8(&rfcsr, RFCSR42_BIT1, 1); - rt2x00_set_field8(&rfcsr, RFCSR42_BIT4, 1); - } -@@ -7087,19 +7087,19 @@ static void rt2800_init_rfcsr_3352(struc - rt2800_rfcsr_write(rt2x00dev, 48, 0x14); - rt2800_rfcsr_write(rt2x00dev, 49, 0x00); - rfcsr = 0x2d; -- if (!tx0_int_pa) -+ if (tx0_ext_pa) - rt2x00_set_field8(&rfcsr, RFCSR50_TX0_EXT_PA, 1); -- if (!tx1_int_pa) -+ if (tx1_ext_pa) - rt2x00_set_field8(&rfcsr, RFCSR50_TX1_EXT_PA, 1); - rt2800_rfcsr_write(rt2x00dev, 50, rfcsr); -- rt2800_rfcsr_write(rt2x00dev, 51, (tx0_int_pa ? 0x7f : 0x52)); -- rt2800_rfcsr_write(rt2x00dev, 52, (tx0_int_pa ? 0x00 : 0xc0)); -- rt2800_rfcsr_write(rt2x00dev, 53, (tx0_int_pa ? 0x52 : 0xd2)); -- rt2800_rfcsr_write(rt2x00dev, 54, (tx0_int_pa ? 0x1b : 0xc0)); -- rt2800_rfcsr_write(rt2x00dev, 55, (tx1_int_pa ? 0x7f : 0x52)); -- rt2800_rfcsr_write(rt2x00dev, 56, (tx1_int_pa ? 0x00 : 0xc0)); -- rt2800_rfcsr_write(rt2x00dev, 57, (tx0_int_pa ? 0x52 : 0x49)); -- rt2800_rfcsr_write(rt2x00dev, 58, (tx1_int_pa ? 0x1b : 0xc0)); -+ rt2800_rfcsr_write(rt2x00dev, 51, (tx0_ext_pa ? 0x52 : 0x7f)); -+ rt2800_rfcsr_write(rt2x00dev, 52, (tx0_ext_pa ? 0xc0 : 0x00)); -+ rt2800_rfcsr_write(rt2x00dev, 53, (tx0_ext_pa ? 0xd2 : 0x52)); -+ rt2800_rfcsr_write(rt2x00dev, 54, (tx0_ext_pa ? 0xc0 : 0x1b)); -+ rt2800_rfcsr_write(rt2x00dev, 55, (tx1_ext_pa ? 0x52 : 0x7f)); -+ rt2800_rfcsr_write(rt2x00dev, 56, (tx1_ext_pa ? 0xc0 : 0x00)); -+ rt2800_rfcsr_write(rt2x00dev, 57, (tx0_ext_pa ? 0x49 : 0x52)); -+ rt2800_rfcsr_write(rt2x00dev, 58, (tx1_ext_pa ? 0xc0 : 0x1b)); - rt2800_rfcsr_write(rt2x00dev, 59, 0x00); - rt2800_rfcsr_write(rt2x00dev, 60, 0x00); - rt2800_rfcsr_write(rt2x00dev, 61, 0x00); -@@ -8782,13 +8782,13 @@ static int rt2800_init_eeprom(struct rt2 - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); - - if (rt2x00_rt(rt2x00dev, RT3352)) { -- if (!rt2x00_get_field16(eeprom, -+ if (rt2x00_get_field16(eeprom, - EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352)) -- __set_bit(CAPABILITY_INTERNAL_PA_TX0, -+ __set_bit(CAPABILITY_EXTERNAL_PA_TX0, - &rt2x00dev->cap_flags); -- if (!rt2x00_get_field16(eeprom, -+ if (rt2x00_get_field16(eeprom, - EEPROM_NIC_CONF1_EXTERNAL_TX1_PA_3352)) -- __set_bit(CAPABILITY_INTERNAL_PA_TX1, -+ __set_bit(CAPABILITY_EXTERNAL_PA_TX1, - &rt2x00dev->cap_flags); - } - ---- a/drivers/net/wireless/ralink/rt2x00/rt2x00.h -+++ b/drivers/net/wireless/ralink/rt2x00/rt2x00.h -@@ -719,8 +719,8 @@ enum rt2x00_capability_flags { - CAPABILITY_DOUBLE_ANTENNA, - CAPABILITY_BT_COEXIST, - CAPABILITY_VCO_RECALIBRATION, -- CAPABILITY_INTERNAL_PA_TX0, -- CAPABILITY_INTERNAL_PA_TX1, -+ CAPABILITY_EXTERNAL_PA_TX0, -+ CAPABILITY_EXTERNAL_PA_TX1, - }; - - /* diff --git a/package/kernel/mac80211/patches/020-21-rt2800-fix-LNA-gain-assignment-for-MT7620.patch b/package/kernel/mac80211/patches/020-21-rt2800-fix-LNA-gain-assignment-for-MT7620.patch deleted file mode 100644 index 71a4ffea45..0000000000 --- a/package/kernel/mac80211/patches/020-21-rt2800-fix-LNA-gain-assignment-for-MT7620.patch +++ /dev/null @@ -1,49 +0,0 @@ -From 0109238d62a99ea779a7e28e21868118e7b8d69d Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 10 Apr 2017 14:28:14 +0200 -Subject: [PATCH 1/2] rt2800: fix LNA gain assignment for MT7620 -To: Stanislaw Gruszka -Cc: Helmut Schaa , - linux-wireless@vger.kernel.org, - Kalle Valo - -The base value used for MT7620 differs from Rt5392 which resulted in -quite bad RX signal quality. Fix this by using the correct base value as -well as the LNA calibration values for HT20. - -Reported-by: Tom Psyborg -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 18 ++++++++++++++++-- - 1 file changed, 16 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -3806,11 +3806,25 @@ static void rt2800_config_channel(struct - } - - if (rt2x00_rt(rt2x00dev, RT5592) || rt2x00_rt(rt2x00dev, RT6352)) { -+ reg = 0x10; -+ if (!conf_is_ht40(conf)) { -+ if (rt2x00_rt(rt2x00dev, RT6352) && -+ rt2x00_has_cap_external_lna_bg(rt2x00dev)) { -+ reg |= 0x5; -+ } else { -+ reg |= 0xa; -+ } -+ } - rt2800_bbp_write(rt2x00dev, 195, 141); -- rt2800_bbp_write(rt2x00dev, 196, conf_is_ht40(conf) ? 0x10 : 0x1a); -+ rt2800_bbp_write(rt2x00dev, 196, reg); - - /* AGC init */ -- reg = (rf->channel <= 14 ? 0x1c : 0x24) + 2 * rt2x00dev->lna_gain; -+ if (rt2x00_rt(rt2x00dev, RT6352)) -+ reg = 0x04; -+ else -+ reg = rf->channel <= 14 ? 0x1c : 0x24; -+ -+ reg += 2 * rt2x00dev->lna_gain; - rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); - - rt2800_iq_calibrate(rt2x00dev, rf->channel); diff --git a/package/kernel/mac80211/patches/020-22-rt2800-do-VCO-calibration-after-programming-ALC.patch b/package/kernel/mac80211/patches/020-22-rt2800-do-VCO-calibration-after-programming-ALC.patch deleted file mode 100644 index 3d76408cd2..0000000000 --- a/package/kernel/mac80211/patches/020-22-rt2800-do-VCO-calibration-after-programming-ALC.patch +++ /dev/null @@ -1,29 +0,0 @@ -From feb608c7986c14bab153f31f8e96f251072e6578 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Mon, 10 Apr 2017 15:33:20 +0200 -Subject: [PATCH 2/2] rt2800: do VCO calibration after programming ALC -To: Stanislaw Gruszka -Cc: Helmut Schaa , - linux-wireless@vger.kernel.org, - Kalle Valo - -Scanning fails if we don't do VCO calibration every time. -The vendor driver duplicates the VCO calibration function into the -channel switching logic, we can do the same with less duplication. - -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 2 ++ - 1 file changed, 2 insertions(+) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -3407,6 +3407,8 @@ static void rt2800_config_alc(struct rt2 - rt2800_rfcsr_write(rt2x00dev, 42, 0x5b); - } - rt2800_register_write(rt2x00dev, MAC_SYS_CTRL, mac_sys_ctrl); -+ -+ rt2800_vco_calibration(rt2x00dev); - } - - static void rt2800_bbp_write_with_rx_chain(struct rt2x00_dev *rt2x00dev, diff --git a/package/kernel/mac80211/patches/020-23-rt2800-fix-mt7620-vco-calibration-registers.patch b/package/kernel/mac80211/patches/020-23-rt2800-fix-mt7620-vco-calibration-registers.patch deleted file mode 100644 index 360d06e8f8..0000000000 --- a/package/kernel/mac80211/patches/020-23-rt2800-fix-mt7620-vco-calibration-registers.patch +++ /dev/null @@ -1,45 +0,0 @@ -From 02c452f317b4a4d06c433c294e66896a389731c1 Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 18 Apr 2017 11:09:53 +0200 -Subject: [PATCH] rt2800: fix mt7620 vco calibration registers -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit -To: Stanislaw Gruszka -Cc: Helmut Schaa , - linux-wireless@vger.kernel.org, - Kalle Valo , - Tom Psyborg - -Use register values from init LNA function instead of the ones from -restore LNA function. Apply register values based on rx path -configuration. - -Signed-off-by: Tomislav Požega -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 +++--- - 1 file changed, 3 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -4932,7 +4932,7 @@ void rt2800_vco_calibration(struct rt2x0 - rt2800_register_write(rt2x00dev, TX_PIN_CFG, tx_pin); - - if (rt2x00_rt(rt2x00dev, RT6352)) { -- if (rt2x00dev->default_ant.tx_chain_num == 1) { -+ if (rt2x00dev->default_ant.rx_chain_num == 1) { - rt2800_bbp_write(rt2x00dev, 91, 0x07); - rt2800_bbp_write(rt2x00dev, 95, 0x1A); - rt2800_bbp_write(rt2x00dev, 195, 128); -@@ -4953,8 +4953,8 @@ void rt2800_vco_calibration(struct rt2x0 - } - - if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { -- rt2800_bbp_write(rt2x00dev, 75, 0x60); -- rt2800_bbp_write(rt2x00dev, 76, 0x44); -+ rt2800_bbp_write(rt2x00dev, 75, 0x68); -+ rt2800_bbp_write(rt2x00dev, 76, 0x4C); - rt2800_bbp_write(rt2x00dev, 79, 0x1C); - rt2800_bbp_write(rt2x00dev, 80, 0x0C); - rt2800_bbp_write(rt2x00dev, 82, 0xB6); diff --git a/package/kernel/mac80211/patches/020-24-rt2800-fix-mt7620-E2-channel-registers.patch b/package/kernel/mac80211/patches/020-24-rt2800-fix-mt7620-E2-channel-registers.patch deleted file mode 100644 index 92c2134845..0000000000 --- a/package/kernel/mac80211/patches/020-24-rt2800-fix-mt7620-E2-channel-registers.patch +++ /dev/null @@ -1,36 +0,0 @@ -From c426cb0ed15ee12dfdc8c53ddd1449ac617023cf Mon Sep 17 00:00:00 2001 -From: Daniel Golle -Date: Tue, 18 Apr 2017 11:45:37 +0200 -Subject: [PATCH] rt2800: fix mt7620 E2 channel registers -To: Stanislaw Gruszka -Cc: Helmut Schaa , - linux-wireless@vger.kernel.org, - Kalle Valo , - Tom Psyborg - -From: Tomislav Požega - -update RF register 47 and 54 values according to vendor driver - -Signed-off-by: Tomislav Požega -Signed-off-by: Daniel Golle ---- - drivers/net/wireless/ralink/rt2x00/rt2800lib.c | 6 ++++-- - 1 file changed, 4 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -+++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8145,9 +8145,11 @@ static void rt2800_init_rfcsr_6352(struc - rt2800_rfcsr_write_chanreg(rt2x00dev, 44, 0xB3); - rt2800_rfcsr_write_chanreg(rt2x00dev, 45, 0xD5); - rt2800_rfcsr_write_chanreg(rt2x00dev, 46, 0x27); -- rt2800_rfcsr_write_chanreg(rt2x00dev, 47, 0x69); -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 47, 0x67); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 47, 0x69); - rt2800_rfcsr_write_chanreg(rt2x00dev, 48, 0xFF); -- rt2800_rfcsr_write_chanreg(rt2x00dev, 54, 0x20); -+ rt2800_rfcsr_write_bank(rt2x00dev, 4, 54, 0x27); -+ rt2800_rfcsr_write_bank(rt2x00dev, 6, 54, 0x20); - rt2800_rfcsr_write_chanreg(rt2x00dev, 55, 0x66); - rt2800_rfcsr_write_chanreg(rt2x00dev, 56, 0xFF); - rt2800_rfcsr_write_chanreg(rt2x00dev, 57, 0x1C); diff --git a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch index 527938f015..1fc52f9ab0 100644 --- a/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch +++ b/package/kernel/mac80211/patches/060-no_local_ssb_bcma.patch @@ -1,6 +1,6 @@ ---- a/.local-symbols -+++ b/.local-symbols -@@ -482,45 +482,6 @@ USB_IPHETH= +--- a/local-symbols ++++ b/local-symbols +@@ -383,45 +383,6 @@ USB_IPHETH= USB_SIERRA_NET= USB_VL600= USB_NET_CH9200= @@ -48,7 +48,7 @@ NFC_NCI= --- a/drivers/net/wireless/broadcom/b43/main.c +++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -2866,7 +2866,7 @@ static struct ssb_device *b43_ssb_gpio_d +@@ -2876,7 +2876,7 @@ static struct ssb_device *b43_ssb_gpio_d { struct ssb_bus *bus = dev->dev->sdev->bus; @@ -57,7 +57,7 @@ return (bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev); #else return bus->chipco.dev; -@@ -4883,7 +4883,7 @@ static int b43_wireless_core_init(struct +@@ -4893,7 +4893,7 @@ static int b43_wireless_core_init(struct } if (sprom->boardflags_lo & B43_BFL_XTAL_NOSLOW) hf |= B43_HF_DSCRQ; /* Disable slowclock requests from ucode. */ @@ -110,7 +110,7 @@ --- a/Kconfig.sources +++ b/Kconfig.sources @@ -9,9 +9,6 @@ source "$BACKPORT_DIR/drivers/net/wirele - source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig" + #source "$BACKPORT_DIR/drivers/net/ethernet/Kconfig" source "$BACKPORT_DIR/drivers/net/usb/Kconfig" -source "$BACKPORT_DIR/drivers/ssb/Kconfig" @@ -118,15 +118,15 @@ - source "$BACKPORT_DIR/net/nfc/Kconfig" - source "$BACKPORT_DIR/drivers/media/Kconfig" + #source "$BACKPORT_DIR/drivers/media/Kconfig" --- a/Makefile.kernel +++ b/Makefile.kernel -@@ -38,8 +38,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/ +@@ -39,8 +39,6 @@ obj-$(CPTCFG_MAC80211) += net/mac80211/ obj-$(CPTCFG_WLAN) += drivers/net/wireless/ - obj-$(CPTCFG_BT) += net/bluetooth/ - obj-$(CPTCFG_BT) += drivers/bluetooth/ + #obj-$(CPTCFG_BT) += net/bluetooth/ + #obj-$(CPTCFG_BT) += drivers/bluetooth/ -obj-$(CPTCFG_SSB) += drivers/ssb/ -obj-$(CPTCFG_BCMA) += drivers/bcma/ - obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/ + #obj-$(CPTCFG_ETHERNET) += drivers/net/ethernet/ obj-$(CPTCFG_USB_NET_RNDIS_WLAN) += drivers/net/usb/ obj-$(CPTCFG_NFC) += net/nfc/ diff --git a/package/kernel/mac80211/patches/080-ath10k_thermal_config.patch b/package/kernel/mac80211/patches/080-ath10k_thermal_config.patch index e08fa32a3b..796615b03c 100644 --- a/package/kernel/mac80211/patches/080-ath10k_thermal_config.patch +++ b/package/kernel/mac80211/patches/080-ath10k_thermal_config.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath10k/Kconfig +++ b/drivers/net/wireless/ath/ath10k/Kconfig -@@ -48,6 +48,12 @@ config ATH10K_TRACING +@@ -65,6 +65,12 @@ config ATH10K_TRACING ---help--- Select this to ath10k use tracing infrastructure. diff --git a/package/kernel/mac80211/patches/090-remove-cred.patch b/package/kernel/mac80211/patches/090-remove-cred.patch deleted file mode 100644 index 3adb2afb86..0000000000 --- a/package/kernel/mac80211/patches/090-remove-cred.patch +++ /dev/null @@ -1,15 +0,0 @@ -This is only needed for kernel < 2.6.29 and conflicts with kernel 4.4.42 - ---- a/backport-include/linux/cred.h -+++ /dev/null -@@ -1,10 +0,0 @@ --#ifndef __BACKPORT_LINUX_CRED_H --#define __BACKPORT_LINUX_CRED_H --#include_next --#include -- --#ifndef current_user_ns --#define current_user_ns() (current->nsproxy->user_ns) --#endif -- --#endif /* __BACKPORT_LINUX_CRED_H */ diff --git a/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch index 95fea441a4..263be3e209 100644 --- a/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch +++ b/package/kernel/mac80211/patches/100-remove-cryptoapi-dependencies.patch @@ -6,9 +6,9 @@ depends on CRYPTO_AES - select BPAUTO_CRYPTO_CCM - depends on CRYPTO_GCM + depends on CRYPTO_CMAC depends on CRC32 ---help--- - This option enables the hardware independent IEEE 802.11 --- a/net/mac80211/Makefile +++ b/net/mac80211/Makefile @@ -16,9 +16,7 @@ mac80211-y := \ @@ -275,7 +275,7 @@ struct { --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c -@@ -305,7 +305,8 @@ ieee80211_crypto_tkip_decrypt(struct iee +@@ -306,7 +306,8 @@ ieee80211_crypto_tkip_decrypt(struct iee } @@ -285,7 +285,7 @@ { __le16 mask_fc; int a4_included, mgmt; -@@ -335,14 +336,8 @@ static void ccmp_special_blocks(struct s +@@ -336,14 +337,8 @@ static void ccmp_special_blocks(struct s else qos_tid = 0; @@ -302,7 +302,7 @@ /* Nonce: Nonce Flags | A2 | PN * Nonce Flags: Priority (b0..b3) | Management (b4) | Reserved (b5..b7) -@@ -350,6 +345,8 @@ static void ccmp_special_blocks(struct s +@@ -351,6 +346,8 @@ static void ccmp_special_blocks(struct s b_0[1] = qos_tid | (mgmt << 4); memcpy(&b_0[2], hdr->addr2, ETH_ALEN); memcpy(&b_0[8], pn, IEEE80211_CCMP_PN_LEN); @@ -311,7 +311,7 @@ /* AAD (extra authenticate-only data) / masked 802.11 header * FC | A1 | A2 | A3 | SC | [A4] | [QC] */ -@@ -406,7 +403,7 @@ static int ccmp_encrypt_skb(struct ieee8 +@@ -407,7 +404,7 @@ static int ccmp_encrypt_skb(struct ieee8 u8 *pos; u8 pn[6]; u64 pn64; @@ -320,7 +320,7 @@ u8 b_0[AES_BLOCK_SIZE]; if (info->control.hw_key && -@@ -461,9 +458,11 @@ static int ccmp_encrypt_skb(struct ieee8 +@@ -462,9 +459,11 @@ static int ccmp_encrypt_skb(struct ieee8 return 0; pos += IEEE80211_CCMP_HDR_LEN; @@ -335,7 +335,7 @@ } -@@ -536,7 +535,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee +@@ -537,7 +536,7 @@ ieee80211_crypto_ccmp_decrypt(struct iee u8 aad[2 * AES_BLOCK_SIZE]; u8 b_0[AES_BLOCK_SIZE]; /* hardware didn't decrypt/verify MIC */ @@ -344,7 +344,7 @@ if (ieee80211_aes_ccm_decrypt( key->u.ccmp.tfm, b_0, aad, -@@ -638,7 +637,7 @@ static int gcmp_encrypt_skb(struct ieee8 +@@ -639,7 +638,7 @@ static int gcmp_encrypt_skb(struct ieee8 u8 *pos; u8 pn[6]; u64 pn64; @@ -353,7 +353,7 @@ u8 j_0[AES_BLOCK_SIZE]; if (info->control.hw_key && -@@ -695,8 +694,10 @@ static int gcmp_encrypt_skb(struct ieee8 +@@ -696,8 +695,10 @@ static int gcmp_encrypt_skb(struct ieee8 pos += IEEE80211_GCMP_HDR_LEN; gcmp_special_blocks(skb, pn, j_0, aad); @@ -366,7 +366,7 @@ } ieee80211_tx_result -@@ -1120,9 +1121,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct +@@ -1121,9 +1122,9 @@ ieee80211_crypto_aes_gmac_encrypt(struct struct ieee80211_key *key = tx->key; struct ieee80211_mmie_16 *mmie; struct ieee80211_hdr *hdr; @@ -378,7 +378,7 @@ if (WARN_ON(skb_queue_len(&tx->skbs) != 1)) return TX_DROP; -@@ -1168,7 +1169,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct +@@ -1169,7 +1170,7 @@ ieee80211_crypto_aes_gmac_decrypt(struct struct ieee80211_rx_status *status = IEEE80211_SKB_RXCB(skb); struct ieee80211_key *key = rx->key; struct ieee80211_mmie_16 *mmie; diff --git a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch index ff619129d9..005e3e5d5d 100644 --- a/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch +++ b/package/kernel/mac80211/patches/110-mac80211_keep_keys_on_stop_ap.patch @@ -2,7 +2,7 @@ Used for AP+STA support in OpenWrt - preserve AP mode keys across STA reconnects --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -1014,7 +1014,6 @@ static int ieee80211_stop_ap(struct wiph +@@ -1056,7 +1056,6 @@ static int ieee80211_stop_ap(struct wiph sdata->u.ap.driver_smps_mode = IEEE80211_SMPS_OFF; __sta_info_flush(sdata, true); diff --git a/package/kernel/mac80211/patches/130-mac80211-hwsim-hrtimer-clock.patch b/package/kernel/mac80211/patches/130-mac80211-hwsim-hrtimer-clock.patch deleted file mode 100644 index 828ed83cb7..0000000000 --- a/package/kernel/mac80211/patches/130-mac80211-hwsim-hrtimer-clock.patch +++ /dev/null @@ -1,11 +0,0 @@ ---- a/drivers/net/wireless/mac80211_hwsim.c -+++ b/drivers/net/wireless/mac80211_hwsim.c -@@ -2678,7 +2678,7 @@ static int mac80211_hwsim_new_radio(stru - - tasklet_hrtimer_init(&data->beacon_timer, - mac80211_hwsim_beacon, -- CLOCK_MONOTONIC_RAW, HRTIMER_MODE_ABS); -+ CLOCK_MONOTONIC, HRTIMER_MODE_ABS); - - spin_lock_bh(&hwsim_radio_lock); - list_add_tail(&data->list, &hwsim_radios); diff --git a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch index ca1e53f8df..42a692a1fc 100644 --- a/package/kernel/mac80211/patches/150-disable_addr_notifier.patch +++ b/package/kernel/mac80211/patches/150-disable_addr_notifier.patch @@ -1,6 +1,6 @@ --- a/net/mac80211/main.c +++ b/net/mac80211/main.c -@@ -291,7 +291,7 @@ void ieee80211_restart_hw(struct ieee802 +@@ -292,7 +292,7 @@ void ieee80211_restart_hw(struct ieee802 } EXPORT_SYMBOL(ieee80211_restart_hw); @@ -9,7 +9,7 @@ static int ieee80211_ifa_changed(struct notifier_block *nb, unsigned long data, void *arg) { -@@ -350,7 +350,7 @@ static int ieee80211_ifa_changed(struct +@@ -351,7 +351,7 @@ static int ieee80211_ifa_changed(struct } #endif @@ -18,7 +18,7 @@ static int ieee80211_ifa6_changed(struct notifier_block *nb, unsigned long data, void *arg) { -@@ -1111,14 +1111,14 @@ int ieee80211_register_hw(struct ieee802 +@@ -1115,14 +1115,14 @@ int ieee80211_register_hw(struct ieee802 if (result) goto fail_flows; @@ -35,7 +35,7 @@ local->ifa6_notifier.notifier_call = ieee80211_ifa6_changed; result = register_inet6addr_notifier(&local->ifa6_notifier); if (result) -@@ -1127,13 +1127,13 @@ int ieee80211_register_hw(struct ieee802 +@@ -1131,13 +1131,13 @@ int ieee80211_register_hw(struct ieee802 return 0; @@ -52,7 +52,7 @@ fail_ifa: #endif ieee80211_txq_teardown_flows(local); -@@ -1163,10 +1163,10 @@ void ieee80211_unregister_hw(struct ieee +@@ -1167,10 +1167,10 @@ void ieee80211_unregister_hw(struct ieee tasklet_kill(&local->tx_pending_tasklet); tasklet_kill(&local->tasklet); diff --git a/package/kernel/mac80211/patches/210-ap_scan.patch b/package/kernel/mac80211/patches/210-ap_scan.patch index 3b613bba0e..e9999e32b9 100644 --- a/package/kernel/mac80211/patches/210-ap_scan.patch +++ b/package/kernel/mac80211/patches/210-ap_scan.patch @@ -1,6 +1,6 @@ --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -2165,7 +2165,7 @@ static int ieee80211_scan(struct wiphy * +@@ -2212,7 +2212,7 @@ static int ieee80211_scan(struct wiphy * * the frames sent while scanning on other channel will be * lost) */ diff --git a/package/kernel/mac80211/patches/304-ath9k-force-rx_clear-when-disabling-rx.patch b/package/kernel/mac80211/patches/304-ath9k-force-rx_clear-when-disabling-rx.patch index eb6862db6d..8aaccf49b4 100644 --- a/package/kernel/mac80211/patches/304-ath9k-force-rx_clear-when-disabling-rx.patch +++ b/package/kernel/mac80211/patches/304-ath9k-force-rx_clear-when-disabling-rx.patch @@ -12,7 +12,7 @@ Signed-off-by: Helmut Schaa --- a/drivers/net/wireless/ath/ath9k/mac.c +++ b/drivers/net/wireless/ath/ath9k/mac.c -@@ -677,13 +677,18 @@ void ath9k_hw_startpcureceive(struct ath +@@ -678,13 +678,18 @@ void ath9k_hw_startpcureceive(struct ath ath9k_ani_reset(ah, is_scanning); diff --git a/package/kernel/mac80211/patches/305-ath9k-limit-retries-for-powersave-response-frames.patch b/package/kernel/mac80211/patches/305-ath9k-limit-retries-for-powersave-response-frames.patch index 5923594be3..31825b819c 100644 --- a/package/kernel/mac80211/patches/305-ath9k-limit-retries-for-powersave-response-frames.patch +++ b/package/kernel/mac80211/patches/305-ath9k-limit-retries-for-powersave-response-frames.patch @@ -40,7 +40,7 @@ Signed-off-by: Felix Fietkau } static void ath_txq_skb_done(struct ath_softc *sc, struct ath_txq *txq, -@@ -1522,7 +1537,7 @@ ath_tx_form_burst(struct ath_softc *sc, +@@ -1502,7 +1517,7 @@ ath_tx_form_burst(struct ath_softc *sc, break; } @@ -49,7 +49,7 @@ Signed-off-by: Felix Fietkau } while (1); } -@@ -1552,7 +1567,7 @@ static bool ath_tx_sched_aggr(struct ath +@@ -1532,7 +1547,7 @@ static bool ath_tx_sched_aggr(struct ath return false; } @@ -58,7 +58,7 @@ Signed-off-by: Felix Fietkau if (aggr) aggr_len = ath_tx_form_aggr(sc, txq, tid, &bf_q, bf); else -@@ -1710,7 +1725,7 @@ void ath9k_release_buffered_frames(struc +@@ -1690,7 +1705,7 @@ void ath9k_release_buffered_frames(struc break; list_add_tail(&bf->list, &bf_q); @@ -67,7 +67,7 @@ Signed-off-by: Felix Fietkau if (bf_isampdu(bf)) { ath_tx_addto_baw(sc, tid, bf); bf->bf_state.bf_type &= ~BUF_AGGR; -@@ -2410,7 +2425,7 @@ int ath_tx_start(struct ieee80211_hw *hw +@@ -2390,7 +2405,7 @@ int ath_tx_start(struct ieee80211_hw *hw if (txctl->paprd) bf->bf_state.bfs_paprd_timestamp = jiffies; @@ -76,7 +76,7 @@ Signed-off-by: Felix Fietkau ath_tx_send_normal(sc, txq, tid, skb); out: -@@ -2449,7 +2464,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw +@@ -2429,7 +2444,7 @@ void ath_tx_cabq(struct ieee80211_hw *hw break; bf->bf_lastbf = bf; @@ -85,7 +85,7 @@ Signed-off-by: Felix Fietkau ath_buf_set_rate(sc, bf, &info, fi->framelen, false); duration += info.rates[0].PktDuration; if (bf_tail) -@@ -2968,7 +2983,7 @@ int ath9k_tx99_send(struct ath_softc *sc +@@ -2946,7 +2961,7 @@ int ath9k_tx99_send(struct ath_softc *sc return -EINVAL; } diff --git a/package/kernel/mac80211/patches/306-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch b/package/kernel/mac80211/patches/306-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch index 956ab83903..35d07430eb 100644 --- a/package/kernel/mac80211/patches/306-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch +++ b/package/kernel/mac80211/patches/306-Revert-ath9k-interpret-requested-txpower-in-EIRP-dom.patch @@ -8,7 +8,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411. --- a/drivers/net/wireless/ath/ath9k/hw.c +++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -2931,7 +2931,8 @@ void ath9k_hw_apply_txpower(struct ath_h +@@ -2935,7 +2935,8 @@ void ath9k_hw_apply_txpower(struct ath_h { struct ath_regulatory *reg = ath9k_hw_regulatory(ah); struct ieee80211_channel *channel; @@ -18,7 +18,7 @@ This reverts commit 71f5137bf010c6faffab50c0ec15374c59c4a411. if (!chan) return; -@@ -2939,10 +2940,15 @@ void ath9k_hw_apply_txpower(struct ath_h +@@ -2943,10 +2944,15 @@ void ath9k_hw_apply_txpower(struct ath_h channel = chan->chan; chan_pwr = min_t(int, channel->max_power * 2, MAX_RATE_POWER); new_pwr = min_t(int, chan_pwr, reg->power_limit); diff --git a/package/kernel/mac80211/patches/307-mac80211-add-hdrlen-to-ieee80211_tx_data.patch b/package/kernel/mac80211/patches/307-mac80211-add-hdrlen-to-ieee80211_tx_data.patch index 1a6fd8471c..baaca173c7 100644 --- a/package/kernel/mac80211/patches/307-mac80211-add-hdrlen-to-ieee80211_tx_data.patch +++ b/package/kernel/mac80211/patches/307-mac80211-add-hdrlen-to-ieee80211_tx_data.patch @@ -21,7 +21,7 @@ Signed-off-by: Janusz Dziedzic --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c -@@ -925,7 +925,7 @@ ieee80211_tx_h_fragment(struct ieee80211 +@@ -921,7 +921,7 @@ ieee80211_tx_h_fragment(struct ieee80211 struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_hdr *hdr = (void *)skb->data; int frag_threshold = tx->local->hw.wiphy->frag_threshold; @@ -30,7 +30,7 @@ Signed-off-by: Janusz Dziedzic int fragnum; /* no matter what happens, tx->skb moves to tx->skbs */ -@@ -946,8 +946,6 @@ ieee80211_tx_h_fragment(struct ieee80211 +@@ -942,8 +942,6 @@ ieee80211_tx_h_fragment(struct ieee80211 if (WARN_ON(info->flags & IEEE80211_TX_CTL_AMPDU)) return TX_DROP; @@ -39,7 +39,7 @@ Signed-off-by: Janusz Dziedzic /* internal error, why isn't DONTFRAG set? */ if (WARN_ON(skb->len + FCS_LEN <= frag_threshold)) return TX_DROP; -@@ -1179,6 +1177,8 @@ ieee80211_tx_prepare(struct ieee80211_su +@@ -1175,6 +1173,8 @@ ieee80211_tx_prepare(struct ieee80211_su hdr = (struct ieee80211_hdr *) skb->data; @@ -48,7 +48,7 @@ Signed-off-by: Janusz Dziedzic if (likely(sta)) { if (!IS_ERR(sta)) tx->sta = sta; -@@ -3437,6 +3437,7 @@ begin: +@@ -3434,6 +3434,7 @@ begin: tx.local = local; tx.skb = skb; tx.sdata = vif_to_sdata(info->control.vif); @@ -56,7 +56,7 @@ Signed-off-by: Janusz Dziedzic if (txq->sta) tx.sta = container_of(txq->sta, struct sta_info, sta); -@@ -3731,6 +3732,7 @@ ieee80211_build_data_template(struct iee +@@ -3756,6 +3757,7 @@ ieee80211_build_data_template(struct iee hdr = (void *)skb->data; tx.sta = sta_info_get(sdata, hdr->addr1); tx.skb = skb; @@ -66,7 +66,7 @@ Signed-off-by: Janusz Dziedzic rcu_read_unlock(); --- a/net/mac80211/util.c +++ b/net/mac80211/util.c -@@ -1227,6 +1227,7 @@ void ieee80211_send_auth(struct ieee8021 +@@ -1232,6 +1232,7 @@ void ieee80211_send_auth(struct ieee8021 struct ieee80211_local *local = sdata->local; struct sk_buff *skb; struct ieee80211_mgmt *mgmt; @@ -74,8 +74,8 @@ Signed-off-by: Janusz Dziedzic int err; /* 24 + 6 = header + auth_algo + auth_transaction + status_code */ -@@ -1251,8 +1252,10 @@ void ieee80211_send_auth(struct ieee8021 - memcpy(skb_put(skb, extra_len), extra, extra_len); +@@ -1255,8 +1256,10 @@ void ieee80211_send_auth(struct ieee8021 + skb_put_data(skb, extra, extra_len); if (auth_alg == WLAN_AUTH_SHARED_KEY && transaction == 3) { + hdrlen = ieee80211_hdrlen(mgmt->frame_control); @@ -155,7 +155,7 @@ Signed-off-by: Janusz Dziedzic size_t klen, u8 *data, size_t data_len); --- a/net/mac80211/wpa.c +++ b/net/mac80211/wpa.c -@@ -43,7 +43,7 @@ ieee80211_tx_h_michael_mic_add(struct ie +@@ -44,7 +44,7 @@ ieee80211_tx_h_michael_mic_add(struct ie skb->len < 24 || !ieee80211_is_data_present(hdr->frame_control)) return TX_CONTINUE; @@ -164,7 +164,7 @@ Signed-off-by: Janusz Dziedzic if (skb->len < hdrlen) return TX_DROP; -@@ -186,7 +186,6 @@ mic_fail_no_key: +@@ -187,7 +187,6 @@ mic_fail_no_key: static int tkip_encrypt_skb(struct ieee80211_tx_data *tx, struct sk_buff *skb) { @@ -172,7 +172,7 @@ Signed-off-by: Janusz Dziedzic struct ieee80211_key *key = tx->key; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); unsigned int hdrlen; -@@ -201,7 +200,7 @@ static int tkip_encrypt_skb(struct ieee8 +@@ -202,7 +201,7 @@ static int tkip_encrypt_skb(struct ieee8 return 0; } @@ -181,7 +181,7 @@ Signed-off-by: Janusz Dziedzic len = skb->len - hdrlen; if (info->control.hw_key) -@@ -419,7 +418,7 @@ static int ccmp_encrypt_skb(struct ieee8 +@@ -420,7 +419,7 @@ static int ccmp_encrypt_skb(struct ieee8 return 0; } @@ -190,7 +190,7 @@ Signed-off-by: Janusz Dziedzic len = skb->len - hdrlen; if (info->control.hw_key) -@@ -652,7 +651,7 @@ static int gcmp_encrypt_skb(struct ieee8 +@@ -653,7 +652,7 @@ static int gcmp_encrypt_skb(struct ieee8 return 0; } @@ -199,7 +199,7 @@ Signed-off-by: Janusz Dziedzic len = skb->len - hdrlen; if (info->control.hw_key) -@@ -792,7 +791,6 @@ static ieee80211_tx_result +@@ -793,7 +792,6 @@ static ieee80211_tx_result ieee80211_crypto_cs_encrypt(struct ieee80211_tx_data *tx, struct sk_buff *skb) { @@ -207,7 +207,7 @@ Signed-off-by: Janusz Dziedzic struct ieee80211_key *key = tx->key; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); int hdrlen; -@@ -808,8 +806,7 @@ ieee80211_crypto_cs_encrypt(struct ieee8 +@@ -809,8 +807,7 @@ ieee80211_crypto_cs_encrypt(struct ieee8 pskb_expand_head(skb, iv_len, 0, GFP_ATOMIC))) return TX_DROP; diff --git a/package/kernel/mac80211/patches/308-mac80211-add-NEED_ALIGNED4_SKBS-hw-flag.patch b/package/kernel/mac80211/patches/308-mac80211-add-NEED_ALIGNED4_SKBS-hw-flag.patch index 43455773f1..762458ba78 100644 --- a/package/kernel/mac80211/patches/308-mac80211-add-NEED_ALIGNED4_SKBS-hw-flag.patch +++ b/package/kernel/mac80211/patches/308-mac80211-add-NEED_ALIGNED4_SKBS-hw-flag.patch @@ -23,7 +23,7 @@ Signed-off-by: Janusz Dziedzic --- a/include/net/mac80211.h +++ b/include/net/mac80211.h -@@ -2043,6 +2043,9 @@ struct ieee80211_txq { +@@ -2056,6 +2056,9 @@ struct ieee80211_txq { * The stack will not do fragmentation. * The callback for @set_frag_threshold should be set as well. * @@ -33,7 +33,7 @@ Signed-off-by: Janusz Dziedzic * @NUM_IEEE80211_HW_FLAGS: number of hardware flags, used for sizing arrays */ enum ieee80211_hw_flags { -@@ -2085,6 +2088,7 @@ enum ieee80211_hw_flags { +@@ -2098,6 +2101,7 @@ enum ieee80211_hw_flags { IEEE80211_HW_TX_FRAG_LIST, IEEE80211_HW_REPORTS_LOW_ACK, IEEE80211_HW_SUPPORTS_TX_FRAG, @@ -53,7 +53,7 @@ Signed-off-by: Janusz Dziedzic --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h -@@ -1553,6 +1553,29 @@ ieee80211_vif_get_num_mcast_if(struct ie +@@ -1547,6 +1547,29 @@ ieee80211_vif_get_num_mcast_if(struct ie return -1; } @@ -85,7 +85,7 @@ Signed-off-by: Janusz Dziedzic unsigned int mpdu_len, --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h -@@ -282,7 +282,7 @@ struct ieee80211_fast_tx { +@@ -290,7 +290,7 @@ struct ieee80211_fast_tx { u8 hdr_len; u8 sa_offs, da_offs, pn_offs; u8 band; @@ -96,7 +96,7 @@ Signed-off-by: Janusz Dziedzic struct rcu_head rcu_head; --- a/net/mac80211/status.c +++ b/net/mac80211/status.c -@@ -693,9 +693,22 @@ void ieee80211_tx_monitor(struct ieee802 +@@ -642,9 +642,22 @@ void ieee80211_tx_monitor(struct ieee802 struct sk_buff *skb2; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct ieee80211_sub_if_data *sdata; @@ -137,7 +137,7 @@ Signed-off-by: Janusz Dziedzic --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c -@@ -1176,8 +1176,7 @@ ieee80211_tx_prepare(struct ieee80211_su +@@ -1172,8 +1172,7 @@ ieee80211_tx_prepare(struct ieee80211_su info->flags &= ~IEEE80211_TX_INTFL_NEED_TXPROCESSING; hdr = (struct ieee80211_hdr *) skb->data; @@ -147,7 +147,7 @@ Signed-off-by: Janusz Dziedzic if (likely(sta)) { if (!IS_ERR(sta)) -@@ -2152,7 +2151,7 @@ netdev_tx_t ieee80211_monitor_start_xmit +@@ -2150,7 +2149,7 @@ netdev_tx_t ieee80211_monitor_start_xmit goto fail; hdr = (struct ieee80211_hdr *)(skb->data + len_rthdr); @@ -156,7 +156,7 @@ Signed-off-by: Janusz Dziedzic if (skb->len < len_rthdr + hdrlen) goto fail; -@@ -2370,7 +2369,7 @@ static struct sk_buff *ieee80211_build_h +@@ -2368,7 +2367,7 @@ static struct sk_buff *ieee80211_build_h struct ieee80211_chanctx_conf *chanctx_conf; struct ieee80211_sub_if_data *ap_sdata; enum nl80211_band band; @@ -165,7 +165,7 @@ Signed-off-by: Janusz Dziedzic if (IS_ERR(sta)) sta = NULL; -@@ -2590,6 +2589,9 @@ static struct sk_buff *ieee80211_build_h +@@ -2588,6 +2587,9 @@ static struct sk_buff *ieee80211_build_h hdrlen += 2; } @@ -175,7 +175,7 @@ Signed-off-by: Janusz Dziedzic /* * Drop unicast frames to unauthorised stations unless they are * EAPOL frames from the local station. -@@ -2670,6 +2672,7 @@ static struct sk_buff *ieee80211_build_h +@@ -2668,6 +2670,7 @@ static struct sk_buff *ieee80211_build_h skb_pull(skb, skip_header_bytes); head_need = hdrlen + encaps_len + meshhdrlen - skb_headroom(skb); @@ -183,7 +183,7 @@ Signed-off-by: Janusz Dziedzic /* * So we need to modify the skb header and hence need a copy of -@@ -2702,6 +2705,9 @@ static struct sk_buff *ieee80211_build_h +@@ -2700,6 +2703,9 @@ static struct sk_buff *ieee80211_build_h memcpy(skb_push(skb, meshhdrlen), &mesh_hdr, meshhdrlen); #endif @@ -193,7 +193,7 @@ Signed-off-by: Janusz Dziedzic if (ieee80211_is_data_qos(fc)) { __le16 *qos_control; -@@ -2877,6 +2883,9 @@ void ieee80211_check_fast_xmit(struct st +@@ -2875,6 +2881,9 @@ void ieee80211_check_fast_xmit(struct st fc |= cpu_to_le16(IEEE80211_STYPE_QOS_DATA); } @@ -203,7 +203,7 @@ Signed-off-by: Janusz Dziedzic /* We store the key here so there's no point in using rcu_dereference() * but that's fine because the code that changes the pointers will call * this function after doing so. For a single CPU that would be enough, -@@ -3464,7 +3473,7 @@ begin: +@@ -3461,7 +3470,7 @@ begin: if (tx.key && (tx.key->conf.flags & IEEE80211_KEY_FLAG_GENERATE_IV)) @@ -214,7 +214,7 @@ Signed-off-by: Janusz Dziedzic tx.key, skb); --- a/net/mac80211/util.c +++ b/net/mac80211/util.c -@@ -1225,6 +1225,7 @@ void ieee80211_send_auth(struct ieee8021 +@@ -1230,6 +1230,7 @@ void ieee80211_send_auth(struct ieee8021 u32 tx_flags) { struct ieee80211_local *local = sdata->local; @@ -222,8 +222,8 @@ Signed-off-by: Janusz Dziedzic struct sk_buff *skb; struct ieee80211_mgmt *mgmt; unsigned int hdrlen; -@@ -1252,7 +1253,7 @@ void ieee80211_send_auth(struct ieee8021 - memcpy(skb_put(skb, extra_len), extra, extra_len); +@@ -1256,7 +1257,7 @@ void ieee80211_send_auth(struct ieee8021 + skb_put_data(skb, extra, extra_len); if (auth_alg == WLAN_AUTH_SHARED_KEY && transaction == 3) { - hdrlen = ieee80211_hdrlen(mgmt->frame_control); diff --git a/package/kernel/mac80211/patches/309-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch b/package/kernel/mac80211/patches/309-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch index a62b1bb28e..609b15b832 100644 --- a/package/kernel/mac80211/patches/309-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch +++ b/package/kernel/mac80211/patches/309-mac80211-minstrel-Enable-STBC-and-LDPC-for-VHT-Rates.patch @@ -10,7 +10,7 @@ Signed-off-by: Chaitanya TK --- a/include/linux/ieee80211.h +++ b/include/linux/ieee80211.h -@@ -1553,6 +1553,7 @@ struct ieee80211_vht_operation { +@@ -1556,6 +1556,7 @@ struct ieee80211_vht_operation { #define IEEE80211_VHT_CAP_RXSTBC_3 0x00000300 #define IEEE80211_VHT_CAP_RXSTBC_4 0x00000400 #define IEEE80211_VHT_CAP_RXSTBC_MASK 0x00000700 diff --git a/package/kernel/mac80211/patches/310-ath9k-fix-moredata-bit-in-PS-buffered-frame-release.patch b/package/kernel/mac80211/patches/310-ath9k-fix-moredata-bit-in-PS-buffered-frame-release.patch index b2a74ccbac..c9c74bb836 100644 --- a/package/kernel/mac80211/patches/310-ath9k-fix-moredata-bit-in-PS-buffered-frame-release.patch +++ b/package/kernel/mac80211/patches/310-ath9k-fix-moredata-bit-in-PS-buffered-frame-release.patch @@ -7,7 +7,7 @@ Signed-off-by: Felix Fietkau --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c -@@ -1694,6 +1694,22 @@ void ath_tx_aggr_wakeup(struct ath_softc +@@ -1674,6 +1674,22 @@ void ath_tx_aggr_wakeup(struct ath_softc } } @@ -30,7 +30,7 @@ Signed-off-by: Felix Fietkau void ath9k_release_buffered_frames(struct ieee80211_hw *hw, struct ieee80211_sta *sta, u16 tids, int nframes, -@@ -1724,6 +1740,7 @@ void ath9k_release_buffered_frames(struc +@@ -1704,6 +1720,7 @@ void ath9k_release_buffered_frames(struc if (!bf) break; @@ -38,7 +38,7 @@ Signed-off-by: Felix Fietkau list_add_tail(&bf->list, &bf_q); ath_set_rates(tid->an->vif, tid->an->sta, bf, true); if (bf_isampdu(bf)) { -@@ -1747,6 +1764,9 @@ void ath9k_release_buffered_frames(struc +@@ -1727,6 +1744,9 @@ void ath9k_release_buffered_frames(struc if (list_empty(&bf_q)) return; diff --git a/package/kernel/mac80211/patches/311-ath9k-clear-potentially-stale-EOSP-status-bit-in-int.patch b/package/kernel/mac80211/patches/311-ath9k-clear-potentially-stale-EOSP-status-bit-in-int.patch index 9863dffc90..1893187e8a 100644 --- a/package/kernel/mac80211/patches/311-ath9k-clear-potentially-stale-EOSP-status-bit-in-int.patch +++ b/package/kernel/mac80211/patches/311-ath9k-clear-potentially-stale-EOSP-status-bit-in-int.patch @@ -10,7 +10,7 @@ Signed-off-by: Felix Fietkau --- a/drivers/net/wireless/ath/ath9k/xmit.c +++ b/drivers/net/wireless/ath/ath9k/xmit.c -@@ -1004,7 +1004,8 @@ ath_tx_get_tid_subframe(struct ath_softc +@@ -984,7 +984,8 @@ ath_tx_get_tid_subframe(struct ath_softc bf->bf_lastbf = bf; tx_info = IEEE80211_SKB_CB(skb); diff --git a/package/kernel/mac80211/patches/313-ath9k-fix-block-ack-window-tracking-issues.patch b/package/kernel/mac80211/patches/313-ath9k-fix-block-ack-window-tracking-issues.patch index fb8df08afe..59de1dfe1a 100644 --- a/package/kernel/mac80211/patches/313-ath9k-fix-block-ack-window-tracking-issues.patch +++ b/package/kernel/mac80211/patches/313-ath9k-fix-block-ack-window-tracking-issues.patch @@ -75,7 +75,7 @@ Signed-off-by: Felix Fietkau ath_tx_complete_buf(sc, bf, txq, &bf_head, NULL, ts, -@@ -1046,11 +1054,14 @@ ath_tx_get_tid_subframe(struct ath_softc +@@ -1026,11 +1034,14 @@ ath_tx_get_tid_subframe(struct ath_softc INIT_LIST_HEAD(&bf_head); list_add(&bf->list, &bf_head); @@ -91,7 +91,7 @@ Signed-off-by: Felix Fietkau return bf; } -@@ -1108,8 +1119,6 @@ ath_tx_form_aggr(struct ath_softc *sc, s +@@ -1088,8 +1099,6 @@ ath_tx_form_aggr(struct ath_softc *sc, s bf->bf_next = NULL; /* link buffers of this frame to the aggregate */ @@ -100,7 +100,7 @@ Signed-off-by: Felix Fietkau bf->bf_state.ndelim = ndelim; list_add_tail(&bf->list, bf_q); -@@ -1745,10 +1754,8 @@ void ath9k_release_buffered_frames(struc +@@ -1725,10 +1734,8 @@ void ath9k_release_buffered_frames(struc ath9k_set_moredata(sc, bf, true); list_add_tail(&bf->list, &bf_q); ath_set_rates(tid->an->vif, tid->an->sta, bf, true); diff --git a/package/kernel/mac80211/patches/314-ath9k-rename-tx_complete_work-to-hw_check_work.patch b/package/kernel/mac80211/patches/314-ath9k-rename-tx_complete_work-to-hw_check_work.patch deleted file mode 100644 index 5465df3ccf..0000000000 --- a/package/kernel/mac80211/patches/314-ath9k-rename-tx_complete_work-to-hw_check_work.patch +++ /dev/null @@ -1,175 +0,0 @@ -From: Felix Fietkau -Date: Wed, 25 Jan 2017 12:57:05 +0100 -Subject: [PATCH] ath9k: rename tx_complete_work to hw_check_work - -Also include common MAC alive check. This should make the hang checks -more reliable for modes where beacons are not sent and is used as a -starting point for further hang check improvements - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -108,7 +108,7 @@ int ath_descdma_setup(struct ath_softc * - #define ATH_AGGR_MIN_QDEPTH 2 - /* minimum h/w qdepth for non-aggregated traffic */ - #define ATH_NON_AGGR_MIN_QDEPTH 8 --#define ATH_TX_COMPLETE_POLL_INT 1000 -+#define ATH_HW_CHECK_POLL_INT 1000 - #define ATH_TXFIFO_DEPTH 8 - #define ATH_TX_ERROR 0x01 - -@@ -745,7 +745,7 @@ void ath9k_csa_update(struct ath_softc * - #define ATH_PAPRD_TIMEOUT 100 /* msecs */ - #define ATH_PLL_WORK_INTERVAL 100 - --void ath_tx_complete_poll_work(struct work_struct *work); -+void ath_hw_check_work(struct work_struct *work); - void ath_reset_work(struct work_struct *work); - bool ath_hw_check(struct ath_softc *sc); - void ath_hw_pll_work(struct work_struct *work); -@@ -1053,7 +1053,7 @@ struct ath_softc { - #ifdef CPTCFG_ATH9K_DEBUGFS - struct ath9k_debug debug; - #endif -- struct delayed_work tx_complete_work; -+ struct delayed_work hw_check_work; - struct delayed_work hw_pll_work; - struct timer_list sleep_timer; - ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -681,6 +681,7 @@ static int ath9k_init_softc(u16 devid, s - INIT_WORK(&sc->hw_reset_work, ath_reset_work); - INIT_WORK(&sc->paprd_work, ath_paprd_calibrate); - INIT_DELAYED_WORK(&sc->hw_pll_work, ath_hw_pll_work); -+ INIT_DELAYED_WORK(&sc->hw_check_work, ath_hw_check_work); - - ath9k_init_channel_context(sc); - ---- a/drivers/net/wireless/ath/ath9k/link.c -+++ b/drivers/net/wireless/ath/ath9k/link.c -@@ -20,20 +20,13 @@ - * TX polling - checks if the TX engine is stuck somewhere - * and issues a chip reset if so. - */ --void ath_tx_complete_poll_work(struct work_struct *work) -+static bool ath_tx_complete_check(struct ath_softc *sc) - { -- struct ath_softc *sc = container_of(work, struct ath_softc, -- tx_complete_work.work); - struct ath_txq *txq; - int i; -- bool needreset = false; -- - -- if (sc->tx99_state) { -- ath_dbg(ath9k_hw_common(sc->sc_ah), RESET, -- "skip tx hung detection on tx99\n"); -- return; -- } -+ if (sc->tx99_state) -+ return true; - - for (i = 0; i < IEEE80211_NUM_ACS; i++) { - txq = sc->tx.txq_map[i]; -@@ -41,25 +34,36 @@ void ath_tx_complete_poll_work(struct wo - ath_txq_lock(sc, txq); - if (txq->axq_depth) { - if (txq->axq_tx_inprogress) { -- needreset = true; - ath_txq_unlock(sc, txq); -- break; -- } else { -- txq->axq_tx_inprogress = true; -+ goto reset; - } -+ -+ txq->axq_tx_inprogress = true; - } - ath_txq_unlock(sc, txq); - } - -- if (needreset) { -- ath_dbg(ath9k_hw_common(sc->sc_ah), RESET, -- "tx hung, resetting the chip\n"); -- ath9k_queue_reset(sc, RESET_TYPE_TX_HANG); -+ return true; -+ -+reset: -+ ath_dbg(ath9k_hw_common(sc->sc_ah), RESET, -+ "tx hung, resetting the chip\n"); -+ ath9k_queue_reset(sc, RESET_TYPE_TX_HANG); -+ return false; -+ -+} -+ -+void ath_hw_check_work(struct work_struct *work) -+{ -+ struct ath_softc *sc = container_of(work, struct ath_softc, -+ hw_check_work.work); -+ -+ if (!ath_hw_check(sc) || -+ !ath_tx_complete_check(sc)) - return; -- } - -- ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, -- msecs_to_jiffies(ATH_TX_COMPLETE_POLL_INT)); -+ ieee80211_queue_delayed_work(sc->hw, &sc->hw_check_work, -+ msecs_to_jiffies(ATH_HW_CHECK_POLL_INT)); - } - - /* ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -181,7 +181,7 @@ void ath9k_ps_restore(struct ath_softc * - static void __ath_cancel_work(struct ath_softc *sc) - { - cancel_work_sync(&sc->paprd_work); -- cancel_delayed_work_sync(&sc->tx_complete_work); -+ cancel_delayed_work_sync(&sc->hw_check_work); - cancel_delayed_work_sync(&sc->hw_pll_work); - - #ifdef CPTCFG_ATH9K_BTCOEX_SUPPORT -@@ -198,7 +198,8 @@ void ath_cancel_work(struct ath_softc *s - - void ath_restart_work(struct ath_softc *sc) - { -- ieee80211_queue_delayed_work(sc->hw, &sc->tx_complete_work, 0); -+ ieee80211_queue_delayed_work(sc->hw, &sc->hw_check_work, -+ ATH_HW_CHECK_POLL_INT); - - if (AR_SREV_9340(sc->sc_ah) || AR_SREV_9330(sc->sc_ah)) - ieee80211_queue_delayed_work(sc->hw, &sc->hw_pll_work, -@@ -2091,7 +2092,7 @@ void __ath9k_flush(struct ieee80211_hw * - int timeout; - bool drain_txq; - -- cancel_delayed_work_sync(&sc->tx_complete_work); -+ cancel_delayed_work_sync(&sc->hw_check_work); - - if (ah->ah_flags & AH_UNPLUGGED) { - ath_dbg(common, ANY, "Device has been unplugged!\n"); -@@ -2129,7 +2130,8 @@ void __ath9k_flush(struct ieee80211_hw * - ath9k_ps_restore(sc); - } - -- ieee80211_queue_delayed_work(hw, &sc->tx_complete_work, 0); -+ ieee80211_queue_delayed_work(hw, &sc->hw_check_work, -+ ATH_HW_CHECK_POLL_INT); - } - - static bool ath9k_tx_frames_pending(struct ieee80211_hw *hw) ---- a/drivers/net/wireless/ath/ath9k/xmit.c -+++ b/drivers/net/wireless/ath/ath9k/xmit.c -@@ -2916,8 +2916,6 @@ int ath_tx_init(struct ath_softc *sc, in - return error; - } - -- INIT_DELAYED_WORK(&sc->tx_complete_work, ath_tx_complete_poll_work); -- - if (sc->sc_ah->caps.hw_caps & ATH9K_HW_CAP_EDMA) - error = ath_tx_edma_init(sc); - diff --git a/package/kernel/mac80211/patches/315-ath9k_hw-check-if-the-chip-failed-to-wake-up.patch b/package/kernel/mac80211/patches/315-ath9k_hw-check-if-the-chip-failed-to-wake-up.patch deleted file mode 100644 index b0cb74ad05..0000000000 --- a/package/kernel/mac80211/patches/315-ath9k_hw-check-if-the-chip-failed-to-wake-up.patch +++ /dev/null @@ -1,30 +0,0 @@ -From: Felix Fietkau -Date: Wed, 25 Jan 2017 12:58:17 +0100 -Subject: [PATCH] ath9k_hw: check if the chip failed to wake up - -In an RFC patch, Sven Eckelmann and Simon Wunderlich reported: - -"QCA 802.11n chips (especially AR9330/AR9340) sometimes end up in a -state in which a read of AR_CFG always returns 0xdeadbeef. -This should not happen when when the power_mode of the device is -ATH9K_PM_AWAKE." - -Include the check for the default register state in the existing MAC -hang check. - -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/hw.c -+++ b/drivers/net/wireless/ath/ath9k/hw.c -@@ -1624,6 +1624,10 @@ bool ath9k_hw_check_alive(struct ath_hw - int count = 50; - u32 reg, last_val; - -+ /* Check if chip failed to wake up */ -+ if (REG_READ(ah, AR_CFG) == 0xdeadbeef) -+ return false; -+ - if (AR_SREV_9300(ah)) - return !ath9k_hw_detect_mac_hang(ah); - diff --git a/package/kernel/mac80211/patches/316-ath9k-fix-race-condition-in-enabling-disabling-IRQs.patch b/package/kernel/mac80211/patches/316-ath9k-fix-race-condition-in-enabling-disabling-IRQs.patch deleted file mode 100644 index 7a41206132..0000000000 --- a/package/kernel/mac80211/patches/316-ath9k-fix-race-condition-in-enabling-disabling-IRQs.patch +++ /dev/null @@ -1,197 +0,0 @@ -From: Felix Fietkau -Date: Wed, 25 Jan 2017 15:10:37 +0100 -Subject: [PATCH] ath9k: fix race condition in enabling/disabling IRQs - -The code currently relies on refcounting to disable IRQs from within the -IRQ handler and re-enabling them again after the tasklet has run. - -However, due to race conditions sometimes the IRQ handler might be -called twice, or the tasklet may not run at all (if interrupted in the -middle of a reset). - -This can cause nasty imbalances in the irq-disable refcount which will -get the driver permanently stuck until the entire radio has been stopped -and started again (ath_reset will not recover from this). - -Instead of using this fragile logic, change the code to ensure that -running the irq handler during tasklet processing is safe, and leave the -refcount untouched. - -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/ath9k.h -+++ b/drivers/net/wireless/ath/ath9k/ath9k.h -@@ -998,6 +998,7 @@ struct ath_softc { - struct survey_info *cur_survey; - struct survey_info survey[ATH9K_NUM_CHANNELS]; - -+ spinlock_t intr_lock; - struct tasklet_struct intr_tq; - struct tasklet_struct bcon_tasklet; - struct ath_hw *sc_ah; ---- a/drivers/net/wireless/ath/ath9k/init.c -+++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -669,6 +669,7 @@ static int ath9k_init_softc(u16 devid, s - common->bt_ant_diversity = 1; - - spin_lock_init(&common->cc_lock); -+ spin_lock_init(&sc->intr_lock); - spin_lock_init(&sc->sc_serial_rw); - spin_lock_init(&sc->sc_pm_lock); - spin_lock_init(&sc->chan_lock); ---- a/drivers/net/wireless/ath/ath9k/mac.c -+++ b/drivers/net/wireless/ath/ath9k/mac.c -@@ -810,21 +810,12 @@ void ath9k_hw_disable_interrupts(struct - } - EXPORT_SYMBOL(ath9k_hw_disable_interrupts); - --void ath9k_hw_enable_interrupts(struct ath_hw *ah) -+static void __ath9k_hw_enable_interrupts(struct ath_hw *ah) - { - struct ath_common *common = ath9k_hw_common(ah); - u32 sync_default = AR_INTR_SYNC_DEFAULT; - u32 async_mask; - -- if (!(ah->imask & ATH9K_INT_GLOBAL)) -- return; -- -- if (!atomic_inc_and_test(&ah->intr_ref_cnt)) { -- ath_dbg(common, INTERRUPT, "Do not enable IER ref count %d\n", -- atomic_read(&ah->intr_ref_cnt)); -- return; -- } -- - if (AR_SREV_9340(ah) || AR_SREV_9550(ah) || AR_SREV_9531(ah) || - AR_SREV_9561(ah)) - sync_default &= ~AR_INTR_SYNC_HOST1_FATAL; -@@ -846,6 +837,39 @@ void ath9k_hw_enable_interrupts(struct a - ath_dbg(common, INTERRUPT, "AR_IMR 0x%x IER 0x%x\n", - REG_READ(ah, AR_IMR), REG_READ(ah, AR_IER)); - } -+ -+void ath9k_hw_resume_interrupts(struct ath_hw *ah) -+{ -+ struct ath_common *common = ath9k_hw_common(ah); -+ -+ if (!(ah->imask & ATH9K_INT_GLOBAL)) -+ return; -+ -+ if (atomic_read(&ah->intr_ref_cnt) != 0) { -+ ath_dbg(common, INTERRUPT, "Do not enable IER ref count %d\n", -+ atomic_read(&ah->intr_ref_cnt)); -+ return; -+ } -+ -+ __ath9k_hw_enable_interrupts(ah); -+} -+EXPORT_SYMBOL(ath9k_hw_resume_interrupts); -+ -+void ath9k_hw_enable_interrupts(struct ath_hw *ah) -+{ -+ struct ath_common *common = ath9k_hw_common(ah); -+ -+ if (!(ah->imask & ATH9K_INT_GLOBAL)) -+ return; -+ -+ if (!atomic_inc_and_test(&ah->intr_ref_cnt)) { -+ ath_dbg(common, INTERRUPT, "Do not enable IER ref count %d\n", -+ atomic_read(&ah->intr_ref_cnt)); -+ return; -+ } -+ -+ __ath9k_hw_enable_interrupts(ah); -+} - EXPORT_SYMBOL(ath9k_hw_enable_interrupts); - - void ath9k_hw_set_interrupts(struct ath_hw *ah) ---- a/drivers/net/wireless/ath/ath9k/mac.h -+++ b/drivers/net/wireless/ath/ath9k/mac.h -@@ -744,6 +744,7 @@ void ath9k_hw_set_interrupts(struct ath_ - void ath9k_hw_enable_interrupts(struct ath_hw *ah); - void ath9k_hw_disable_interrupts(struct ath_hw *ah); - void ath9k_hw_kill_interrupts(struct ath_hw *ah); -+void ath9k_hw_resume_interrupts(struct ath_hw *ah); - - void ar9002_hw_attach_mac_ops(struct ath_hw *ah); - ---- a/drivers/net/wireless/ath/ath9k/main.c -+++ b/drivers/net/wireless/ath/ath9k/main.c -@@ -374,21 +374,20 @@ void ath9k_tasklet(unsigned long data) - struct ath_common *common = ath9k_hw_common(ah); - enum ath_reset_type type; - unsigned long flags; -- u32 status = sc->intrstatus; -+ u32 status; - u32 rxmask; - -+ spin_lock_irqsave(&sc->intr_lock, flags); -+ status = sc->intrstatus; -+ sc->intrstatus = 0; -+ spin_unlock_irqrestore(&sc->intr_lock, flags); -+ - ath9k_ps_wakeup(sc); - spin_lock(&sc->sc_pcu_lock); - - if (status & ATH9K_INT_FATAL) { - type = RESET_TYPE_FATAL_INT; - ath9k_queue_reset(sc, type); -- -- /* -- * Increment the ref. counter here so that -- * interrupts are enabled in the reset routine. -- */ -- atomic_inc(&ah->intr_ref_cnt); - ath_dbg(common, RESET, "FATAL: Skipping interrupts\n"); - goto out; - } -@@ -404,11 +403,6 @@ void ath9k_tasklet(unsigned long data) - type = RESET_TYPE_BB_WATCHDOG; - ath9k_queue_reset(sc, type); - -- /* -- * Increment the ref. counter here so that -- * interrupts are enabled in the reset routine. -- */ -- atomic_inc(&ah->intr_ref_cnt); - ath_dbg(common, RESET, - "BB_WATCHDOG: Skipping interrupts\n"); - goto out; -@@ -421,7 +415,6 @@ void ath9k_tasklet(unsigned long data) - if ((sc->gtt_cnt >= MAX_GTT_CNT) && !ath9k_hw_check_alive(ah)) { - type = RESET_TYPE_TX_GTT; - ath9k_queue_reset(sc, type); -- atomic_inc(&ah->intr_ref_cnt); - ath_dbg(common, RESET, - "GTT: Skipping interrupts\n"); - goto out; -@@ -478,7 +471,7 @@ void ath9k_tasklet(unsigned long data) - ath9k_btcoex_handle_interrupt(sc, status); - - /* re-enable hardware interrupt */ -- ath9k_hw_enable_interrupts(ah); -+ ath9k_hw_resume_interrupts(ah); - out: - spin_unlock(&sc->sc_pcu_lock); - ath9k_ps_restore(sc); -@@ -542,7 +535,9 @@ irqreturn_t ath_isr(int irq, void *dev) - return IRQ_NONE; - - /* Cache the status */ -- sc->intrstatus = status; -+ spin_lock(&sc->intr_lock); -+ sc->intrstatus |= status; -+ spin_unlock(&sc->intr_lock); - - if (status & SCHED_INTR) - sched = true; -@@ -588,7 +583,7 @@ chip_reset: - - if (sched) { - /* turn off every interrupt */ -- ath9k_hw_disable_interrupts(ah); -+ ath9k_hw_kill_interrupts(ah); - tasklet_schedule(&sc->intr_tq); - } - diff --git a/package/kernel/mac80211/patches/318-0001-brcmfmac-check-brcmf_bus_get_memdump-result-for-erro.patch b/package/kernel/mac80211/patches/318-0001-brcmfmac-check-brcmf_bus_get_memdump-result-for-erro.patch deleted file mode 100644 index 4ae4c606c5..0000000000 --- a/package/kernel/mac80211/patches/318-0001-brcmfmac-check-brcmf_bus_get_memdump-result-for-erro.patch +++ /dev/null @@ -1,52 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 30 Jan 2017 16:09:51 +0100 -Subject: [PATCH] brcmfmac: check brcmf_bus_get_memdump result for error -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This method may be unsupported (see: USB bus) or may just fail (see: -SDIO bus). -While at it rework logic in brcmf_sdio_bus_get_memdump function to avoid -too many conditional code nesting levels. - -Signed-off-by: Rafał Miłecki -Acked-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c -@@ -32,16 +32,25 @@ static int brcmf_debug_create_memdump(st - { - void *dump; - size_t ramsize; -+ int err; - - ramsize = brcmf_bus_get_ramsize(bus); -- if (ramsize) { -- dump = vzalloc(len + ramsize); -- if (!dump) -- return -ENOMEM; -- memcpy(dump, data, len); -- brcmf_bus_get_memdump(bus, dump + len, ramsize); -- dev_coredumpv(bus->dev, dump, len + ramsize, GFP_KERNEL); -+ if (!ramsize) -+ return -ENOTSUPP; -+ -+ dump = vzalloc(len + ramsize); -+ if (!dump) -+ return -ENOMEM; -+ -+ memcpy(dump, data, len); -+ err = brcmf_bus_get_memdump(bus, dump + len, ramsize); -+ if (err) { -+ vfree(dump); -+ return err; - } -+ -+ dev_coredumpv(bus->dev, dump, len + ramsize, GFP_KERNEL); -+ - return 0; - } - diff --git a/package/kernel/mac80211/patches/319-0002-brcmfmac-be-more-verbose-when-PSM-s-watchdog-fires.patch b/package/kernel/mac80211/patches/319-0002-brcmfmac-be-more-verbose-when-PSM-s-watchdog-fires.patch deleted file mode 100644 index 2a3b83864e..0000000000 --- a/package/kernel/mac80211/patches/319-0002-brcmfmac-be-more-verbose-when-PSM-s-watchdog-fires.patch +++ /dev/null @@ -1,38 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Mon, 30 Jan 2017 16:09:52 +0100 -Subject: [PATCH] brcmfmac: be more verbose when PSM's watchdog fires -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -It's important to inform user so he knows things went wrong. He may also -want to get memory dump for further debugging purposes. - -Signed-off-by: Rafał Miłecki -Acked-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c -@@ -58,10 +58,18 @@ static int brcmf_debug_psm_watchdog_noti - const struct brcmf_event_msg *evtmsg, - void *data) - { -+ int err; -+ - brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx); - -- return brcmf_debug_create_memdump(ifp->drvr->bus_if, data, -- evtmsg->datalen); -+ brcmf_err("PSM's watchdog has fired!\n"); -+ -+ err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data, -+ evtmsg->datalen); -+ if (err) -+ brcmf_err("Failed to get memory dump, %d\n", err); -+ -+ return err; - } - - void brcmf_debugfs_init(void) diff --git a/package/kernel/mac80211/patches/319-0003-brcmfmac-use-wiphy_read_of_freq_limits-to-respect-li.patch b/package/kernel/mac80211/patches/319-0003-brcmfmac-use-wiphy_read_of_freq_limits-to-respect-li.patch deleted file mode 100644 index 6448bad5e9..0000000000 --- a/package/kernel/mac80211/patches/319-0003-brcmfmac-use-wiphy_read_of_freq_limits-to-respect-li.patch +++ /dev/null @@ -1,44 +0,0 @@ -From 0f83ff69735651cc7a3d150466a5257ff829b62b Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 17 Jan 2017 23:35:50 +0100 -Subject: [PATCH] brcmfmac: use wiphy_read_of_freq_limits to respect limits - from DT -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This new helper reads extra frequency limits specified in DT and -disables unavailable chanels. This is useful for devices (like home -routers) with chipsets limited e.g. by board design. - -In order to respect info read from DT we simply need to check for -IEEE80211_CHAN_DISABLED bit when constructing channel info. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 6 ++++++ - 1 file changed, 6 insertions(+) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -5908,6 +5908,9 @@ static int brcmf_construct_chaninfo(stru - continue; - } - -+ if (channel->orig_flags & IEEE80211_CHAN_DISABLED) -+ continue; -+ - /* assuming the chanspecs order is HT20, - * HT40 upper, HT40 lower, and VHT80. - */ -@@ -6509,6 +6512,9 @@ static int brcmf_setup_wiphy(struct wiph - wiphy->bands[NL80211_BAND_5GHZ] = band; - } - } -+ -+ wiphy_read_of_freq_limits(wiphy); -+ - return 0; - } - diff --git a/package/kernel/mac80211/patches/319-0004-brcmfmac-merge-two-brcmf_err-macros-into-one.patch b/package/kernel/mac80211/patches/319-0004-brcmfmac-merge-two-brcmf_err-macros-into-one.patch deleted file mode 100644 index defd5792ea..0000000000 --- a/package/kernel/mac80211/patches/319-0004-brcmfmac-merge-two-brcmf_err-macros-into-one.patch +++ /dev/null @@ -1,43 +0,0 @@ -From 9587a01a7ead9efc5032c16e0d9668de58be1186 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Thu, 2 Feb 2017 22:33:13 +0100 -Subject: [PATCH] brcmfmac: merge two brcmf_err macros into one -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This allows simplifying the code by adding a simple IS_ENABLED check for -CONFIG_BRCMDB symbol. - -Signed-off-by: Rafał Miłecki -Acked-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 8 ++------ - 1 file changed, 2 insertions(+), 6 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -@@ -45,20 +45,16 @@ - #undef pr_fmt - #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -+#ifndef CPTCFG_BRCM_TRACING - /* Macro for error messages. net_ratelimit() is used when driver - * debugging is not selected. When debugging the driver error - * messages are as important as other tracing or even more so. - */ --#ifndef CPTCFG_BRCM_TRACING --#ifdef CPTCFG_BRCMDBG --#define brcmf_err(fmt, ...) pr_err("%s: " fmt, __func__, ##__VA_ARGS__) --#else - #define brcmf_err(fmt, ...) \ - do { \ -- if (net_ratelimit()) \ -+ if (IS_ENABLED(CPTCFG_BRCMDBG) || net_ratelimit()) \ - pr_err("%s: " fmt, __func__, ##__VA_ARGS__); \ - } while (0) --#endif - #else - __printf(2, 3) - void __brcmf_err(const char *func, const char *fmt, ...); diff --git a/package/kernel/mac80211/patches/319-0005-brcmfmac-switch-to-C-function-__brcmf_err-for-printi.patch b/package/kernel/mac80211/patches/319-0005-brcmfmac-switch-to-C-function-__brcmf_err-for-printi.patch deleted file mode 100644 index 5baf6960ec..0000000000 --- a/package/kernel/mac80211/patches/319-0005-brcmfmac-switch-to-C-function-__brcmf_err-for-printi.patch +++ /dev/null @@ -1,69 +0,0 @@ -From 087fa712a00685dac4bcc64b7c3dc8ae6bee8026 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Thu, 2 Feb 2017 22:33:14 +0100 -Subject: [PATCH] brcmfmac: switch to C function (__brcmf_err) for printing - errors -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -This will allow extending code and using more detailed messages e.g. -with the help of dev_err. - -Signed-off-by: Rafał Miłecki -Acked-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - .../net/wireless/broadcom/brcm80211/brcmfmac/common.c | 16 ++++++++++++++++ - drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 6 +++--- - 2 files changed, 19 insertions(+), 3 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -@@ -218,6 +218,22 @@ done: - return err; - } - -+#ifndef CPTCFG_BRCM_TRACING -+void __brcmf_err(const char *func, const char *fmt, ...) -+{ -+ struct va_format vaf; -+ va_list args; -+ -+ va_start(args, fmt); -+ -+ vaf.fmt = fmt; -+ vaf.va = &args; -+ pr_err("%s: %pV", func, &vaf); -+ -+ va_end(args); -+} -+#endif -+ - #if defined(CPTCFG_BRCM_TRACING) || defined(CPTCFG_BRCMDBG) - void __brcmf_dbg(u32 level, const char *func, const char *fmt, ...) - { ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -@@ -45,6 +45,8 @@ - #undef pr_fmt - #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt - -+__printf(2, 3) -+void __brcmf_err(const char *func, const char *fmt, ...); - #ifndef CPTCFG_BRCM_TRACING - /* Macro for error messages. net_ratelimit() is used when driver - * debugging is not selected. When debugging the driver error -@@ -53,11 +55,9 @@ - #define brcmf_err(fmt, ...) \ - do { \ - if (IS_ENABLED(CPTCFG_BRCMDBG) || net_ratelimit()) \ -- pr_err("%s: " fmt, __func__, ##__VA_ARGS__); \ -+ __brcmf_err(__func__, fmt, ##__VA_ARGS__); \ - } while (0) - #else --__printf(2, 3) --void __brcmf_err(const char *func, const char *fmt, ...); - #define brcmf_err(fmt, ...) \ - __brcmf_err(__func__, fmt, ##__VA_ARGS__) - #endif diff --git a/package/kernel/mac80211/patches/319-0006-brcmfmac-merge-two-remaining-brcmf_err-macros.patch b/package/kernel/mac80211/patches/319-0006-brcmfmac-merge-two-remaining-brcmf_err-macros.patch deleted file mode 100644 index 3aaddb800d..0000000000 --- a/package/kernel/mac80211/patches/319-0006-brcmfmac-merge-two-remaining-brcmf_err-macros.patch +++ /dev/null @@ -1,46 +0,0 @@ -From d0630555650a394cf5743268820511f527a561a5 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Thu, 2 Feb 2017 22:33:15 +0100 -Subject: [PATCH] brcmfmac: merge two remaining brcmf_err macros -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Now we always have __brcmf_err function we can do perfectly fine with -just one macro. - -Signed-off-by: Rafał Miłecki -Acked-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 14 +++++--------- - 1 file changed, 5 insertions(+), 9 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -@@ -47,20 +47,16 @@ - - __printf(2, 3) - void __brcmf_err(const char *func, const char *fmt, ...); --#ifndef CPTCFG_BRCM_TRACING --/* Macro for error messages. net_ratelimit() is used when driver -- * debugging is not selected. When debugging the driver error -- * messages are as important as other tracing or even more so. -+/* Macro for error messages. When debugging / tracing the driver all error -+ * messages are important to us. - */ - #define brcmf_err(fmt, ...) \ - do { \ -- if (IS_ENABLED(CPTCFG_BRCMDBG) || net_ratelimit()) \ -+ if (IS_ENABLED(CPTCFG_BRCMDBG) || \ -+ IS_ENABLED(CPTCFG_BRCM_TRACING) || \ -+ net_ratelimit()) \ - __brcmf_err(__func__, fmt, ##__VA_ARGS__); \ - } while (0) --#else --#define brcmf_err(fmt, ...) \ -- __brcmf_err(__func__, fmt, ##__VA_ARGS__) --#endif - - #if defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) - __printf(3, 4) diff --git a/package/kernel/mac80211/patches/320-ath9k-clean-up-and-fix-ath_tx_count_airtime.patch b/package/kernel/mac80211/patches/320-ath9k-clean-up-and-fix-ath_tx_count_airtime.patch deleted file mode 100644 index a6a3bfca6d..0000000000 --- a/package/kernel/mac80211/patches/320-ath9k-clean-up-and-fix-ath_tx_count_airtime.patch +++ /dev/null @@ -1,107 +0,0 @@ -From: Felix Fietkau -Date: Sun, 12 Feb 2017 13:13:05 +0100 -Subject: [PATCH] ath9k: clean up and fix ath_tx_count_airtime - -ath_tx_count_airtime is doing a lot of unnecessary work: - -- Redundant station lookup -- Redundant rcu_read_lock/unlock -- Useless memcpy of bf->rates -- Useless NULL check of bf->bf_mpdu -- Redundant lookup of the skb tid - -Additionally, it tries to look up the mac80211 queue index from the txq, -which fails if the frame was delivered via the power save queue. - -This patch fixes all of these issues by passing down the right set of -pointers instead of doing extra work - -Cc: stable@vger.kernel.org -Fixes: 63fefa050477 ("ath9k: Introduce airtime fairness scheduling between stations") -Signed-off-by: Felix Fietkau ---- - ---- a/drivers/net/wireless/ath/ath9k/xmit.c -+++ b/drivers/net/wireless/ath/ath9k/xmit.c -@@ -723,51 +723,31 @@ static bool bf_is_ampdu_not_probing(stru - return bf_isampdu(bf) && !(info->flags & IEEE80211_TX_CTL_RATE_CTRL_PROBE); - } - --static void ath_tx_count_airtime(struct ath_softc *sc, struct ath_txq *txq, -- struct ath_buf *bf, struct ath_tx_status *ts) -+static void ath_tx_count_airtime(struct ath_softc *sc, struct ath_node *an, -+ struct ath_atx_tid *tid, struct ath_buf *bf, -+ struct ath_tx_status *ts) - { -- struct ath_node *an; -- struct ath_acq *acq = &sc->cur_chan->acq[txq->mac80211_qnum]; -- struct sk_buff *skb; -- struct ieee80211_hdr *hdr; -- struct ieee80211_hw *hw = sc->hw; -- struct ieee80211_tx_rate rates[4]; -- struct ieee80211_sta *sta; -- int i; -+ struct ath_txq *txq = tid->txq; - u32 airtime = 0; -- -- skb = bf->bf_mpdu; -- if(!skb) -- return; -- -- hdr = (struct ieee80211_hdr *)skb->data; -- memcpy(rates, bf->rates, sizeof(rates)); -- -- rcu_read_lock(); -- -- sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr1, hdr->addr2); -- if(!sta) -- goto exit; -- -- -- an = (struct ath_node *) sta->drv_priv; -+ int i; - - airtime += ts->duration * (ts->ts_longretry + 1); -+ for(i = 0; i < ts->ts_rateindex; i++) { -+ int rate_dur = ath9k_hw_get_duration(sc->sc_ah, bf->bf_desc, i); -+ airtime += rate_dur * bf->rates[i].count; -+ } - -- for(i=0; i < ts->ts_rateindex; i++) -- airtime += ath9k_hw_get_duration(sc->sc_ah, bf->bf_desc, i) * rates[i].count; -+ if (sc->airtime_flags & AIRTIME_USE_TX) { -+ int q = txq->mac80211_qnum; -+ struct ath_acq *acq = &sc->cur_chan->acq[q]; - -- if (!!(sc->airtime_flags & AIRTIME_USE_TX)) { - spin_lock_bh(&acq->lock); -- an->airtime_deficit[txq->mac80211_qnum] -= airtime; -- if (an->airtime_deficit[txq->mac80211_qnum] <= 0) -- __ath_tx_queue_tid(sc, ath_get_skb_tid(sc, an, skb)); -+ an->airtime_deficit[q] -= airtime; -+ if (an->airtime_deficit[q] <= 0) -+ __ath_tx_queue_tid(sc, tid); - spin_unlock_bh(&acq->lock); - } - ath_debug_airtime(sc, an, 0, airtime); -- --exit: -- rcu_read_unlock(); - } - - static void ath_tx_process_buffer(struct ath_softc *sc, struct ath_txq *txq, -@@ -791,13 +771,13 @@ static void ath_tx_process_buffer(struct - - ts->duration = ath9k_hw_get_duration(sc->sc_ah, bf->bf_desc, - ts->ts_rateindex); -- ath_tx_count_airtime(sc, txq, bf, ts); - - hdr = (struct ieee80211_hdr *) bf->bf_mpdu->data; - sta = ieee80211_find_sta_by_ifaddr(hw, hdr->addr1, hdr->addr2); - if (sta) { - struct ath_node *an = (struct ath_node *)sta->drv_priv; - tid = ath_get_skb_tid(sc, an, bf->bf_mpdu); -+ ath_tx_count_airtime(sc, an, tid, bf, ts); - if (ts->ts_status & (ATH9K_TXERR_FILT | ATH9K_TXERR_XRETRY)) - tid->clear_ps_filter = true; - } diff --git a/package/kernel/mac80211/patches/321-mac80211-fix-CSA-in-IBSS-mode.patch b/package/kernel/mac80211/patches/321-mac80211-fix-CSA-in-IBSS-mode.patch deleted file mode 100644 index 13765b2900..0000000000 --- a/package/kernel/mac80211/patches/321-mac80211-fix-CSA-in-IBSS-mode.patch +++ /dev/null @@ -1,34 +0,0 @@ -From: Koen Vandeputte -Date: Wed, 8 Feb 2017 15:29:45 +0100 -Subject: [PATCH] mac80211: fix CSA in IBSS mode -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Add the missing IBSS capability flag during capability init as it needs -to be inserted into the generated beacon in order for CSA to work. - -Signed-off-by: Piotr Gawlowicz -Signed-off-by: Mikołaj Chwalisz -Tested-by: Koen Vandeputte ---- - ---- a/net/mac80211/ibss.c -+++ b/net/mac80211/ibss.c -@@ -487,14 +487,14 @@ int ieee80211_ibss_csa_beacon(struct iee - struct beacon_data *presp, *old_presp; - struct cfg80211_bss *cbss; - const struct cfg80211_bss_ies *ies; -- u16 capability = 0; -+ u16 capability = WLAN_CAPABILITY_IBSS; - u64 tsf; - int ret = 0; - - sdata_assert_lock(sdata); - - if (ifibss->privacy) -- capability = WLAN_CAPABILITY_PRIVACY; -+ capability |= WLAN_CAPABILITY_PRIVACY; - - cbss = cfg80211_get_bss(sdata->local->hw.wiphy, ifibss->chandef.chan, - ifibss->bssid, ifibss->ssid, diff --git a/package/kernel/mac80211/patches/322-mac80211-don-t-handle-filtered-frames-within-a-BA-se.patch b/package/kernel/mac80211/patches/322-mac80211-don-t-handle-filtered-frames-within-a-BA-se.patch deleted file mode 100644 index 66e1bfb4c1..0000000000 --- a/package/kernel/mac80211/patches/322-mac80211-don-t-handle-filtered-frames-within-a-BA-se.patch +++ /dev/null @@ -1,28 +0,0 @@ -From: Felix Fietkau -Date: Wed, 22 Feb 2017 16:13:17 +0100 -Subject: [PATCH] mac80211: don't handle filtered frames within a BA session - -When running a BA session, the driver (or the hardware) already takes -care of retransmitting failed frames, since it has to keep the receiver -reorder window in sync. - -Adding another layer of retransmit around that does not improve -anything. In fact, it can only lead to some strong reordering with huge -latency. - -Cc: stable@vger.kernel.org -Signed-off-by: Felix Fietkau ---- - ---- a/net/mac80211/status.c -+++ b/net/mac80211/status.c -@@ -51,7 +51,8 @@ static void ieee80211_handle_filtered_fr - struct ieee80211_hdr *hdr = (void *)skb->data; - int ac; - -- if (info->flags & IEEE80211_TX_CTL_NO_PS_BUFFER) { -+ if (info->flags & (IEEE80211_TX_CTL_NO_PS_BUFFER | -+ IEEE80211_TX_CTL_AMPDU)) { - ieee80211_free_txskb(&local->hw, skb); - return; - } diff --git a/package/kernel/mac80211/patches/323-0001-brcmfmac-Use-net_device_stats-from-struct-net_device.patch b/package/kernel/mac80211/patches/323-0001-brcmfmac-Use-net_device_stats-from-struct-net_device.patch deleted file mode 100644 index 81567d8757..0000000000 --- a/package/kernel/mac80211/patches/323-0001-brcmfmac-Use-net_device_stats-from-struct-net_device.patch +++ /dev/null @@ -1,112 +0,0 @@ -From 91b632803ee4e47c5a5c4dc3d8bf5abf9c16107a Mon Sep 17 00:00:00 2001 -From: Tobias Klauser -Date: Mon, 13 Feb 2017 11:14:09 +0100 -Subject: [PATCH] brcmfmac: Use net_device_stats from struct net_device - -Instead of using a private copy of struct net_device_stats in struct -brcm_if, use stats from struct net_device. Also remove the now -unnecessary .ndo_get_stats function. - -Signed-off-by: Tobias Klauser -Acked-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - .../wireless/broadcom/brcm80211/brcmfmac/core.c | 26 +++++++--------------- - .../wireless/broadcom/brcm80211/brcmfmac/core.h | 2 -- - 2 files changed, 8 insertions(+), 20 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -249,10 +249,10 @@ static netdev_tx_t brcmf_netdev_start_xm - - done: - if (ret) { -- ifp->stats.tx_dropped++; -+ ndev->stats.tx_dropped++; - } else { -- ifp->stats.tx_packets++; -- ifp->stats.tx_bytes += skb->len; -+ ndev->stats.tx_packets++; -+ ndev->stats.tx_bytes += skb->len; - } - - /* Return ok: we always eat the packet */ -@@ -296,15 +296,15 @@ void brcmf_txflowblock(struct device *de - void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb) - { - if (skb->pkt_type == PACKET_MULTICAST) -- ifp->stats.multicast++; -+ ifp->ndev->stats.multicast++; - - if (!(ifp->ndev->flags & IFF_UP)) { - brcmu_pkt_buf_free_skb(skb); - return; - } - -- ifp->stats.rx_bytes += skb->len; -- ifp->stats.rx_packets++; -+ ifp->ndev->stats.rx_bytes += skb->len; -+ ifp->ndev->stats.rx_packets++; - - brcmf_dbg(DATA, "rx proto=0x%X\n", ntohs(skb->protocol)); - if (in_interrupt()) -@@ -327,7 +327,7 @@ static int brcmf_rx_hdrpull(struct brcmf - - if (ret || !(*ifp) || !(*ifp)->ndev) { - if (ret != -ENODATA && *ifp) -- (*ifp)->stats.rx_errors++; -+ (*ifp)->ndev->stats.rx_errors++; - brcmu_pkt_buf_free_skb(skb); - return -ENODATA; - } -@@ -388,7 +388,7 @@ void brcmf_txfinalize(struct brcmf_if *i - } - - if (!success) -- ifp->stats.tx_errors++; -+ ifp->ndev->stats.tx_errors++; - - brcmu_pkt_buf_free_skb(txp); - } -@@ -411,15 +411,6 @@ void brcmf_txcomplete(struct device *dev - } - } - --static struct net_device_stats *brcmf_netdev_get_stats(struct net_device *ndev) --{ -- struct brcmf_if *ifp = netdev_priv(ndev); -- -- brcmf_dbg(TRACE, "Enter, bsscfgidx=%d\n", ifp->bsscfgidx); -- -- return &ifp->stats; --} -- - static void brcmf_ethtool_get_drvinfo(struct net_device *ndev, - struct ethtool_drvinfo *info) - { -@@ -492,7 +483,6 @@ static int brcmf_netdev_open(struct net_ - static const struct net_device_ops brcmf_netdev_ops_pri = { - .ndo_open = brcmf_netdev_open, - .ndo_stop = brcmf_netdev_stop, -- .ndo_get_stats = brcmf_netdev_get_stats, - .ndo_start_xmit = brcmf_netdev_start_xmit, - .ndo_set_mac_address = brcmf_netdev_set_mac_address, - .ndo_set_rx_mode = brcmf_netdev_set_multicast_list ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.h -@@ -171,7 +171,6 @@ enum brcmf_netif_stop_reason { - * @drvr: points to device related information. - * @vif: points to cfg80211 specific interface information. - * @ndev: associated network device. -- * @stats: interface specific network statistics. - * @multicast_work: worker object for multicast provisioning. - * @ndoffload_work: worker object for neighbor discovery offload configuration. - * @fws_desc: interface specific firmware-signalling descriptor. -@@ -187,7 +186,6 @@ struct brcmf_if { - struct brcmf_pub *drvr; - struct brcmf_cfg80211_vif *vif; - struct net_device *ndev; -- struct net_device_stats stats; - struct work_struct multicast_work; - struct work_struct ndoffload_work; - struct brcmf_fws_mac_descriptor *fws_desc; diff --git a/package/kernel/mac80211/patches/323-0002-brcmfmac-always-print-error-when-PSM-s-watchdog-fire.patch b/package/kernel/mac80211/patches/323-0002-brcmfmac-always-print-error-when-PSM-s-watchdog-fire.patch deleted file mode 100644 index 7272b889c0..0000000000 --- a/package/kernel/mac80211/patches/323-0002-brcmfmac-always-print-error-when-PSM-s-watchdog-fire.patch +++ /dev/null @@ -1,148 +0,0 @@ -From f1ac3aa212af6dd0a36dc07a63f95f91be6f4935 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Fri, 24 Feb 2017 17:32:46 +0100 -Subject: [PATCH] brcmfmac: always print error when PSM's watchdog fires -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -So far we were attaching BRCMF_E_PSM_WATCHDOG event listener in -brcmf_debug_attach which gets compiled only with CONFIG_BRCMDBG. This -event means something went wrong and firmware / hardware usually can't -be expected to work (reliably). - -Such a problem is significant for user experience so I believe we should -print an error unconditionally (even with debugging disabled). What can -be indeed optional is dumping bus memory as this is clearly part of -debugging process. - -In the future we may also try to extend this listener by trying to -recover from the error or at least signal it to the cfg80211. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Kalle Valo ---- - .../wireless/broadcom/brcm80211/brcmfmac/core.c | 22 ++++++++++++++++++ - .../wireless/broadcom/brcm80211/brcmfmac/debug.c | 26 +++------------------- - .../wireless/broadcom/brcm80211/brcmfmac/debug.h | 9 ++++++++ - 3 files changed, 34 insertions(+), 23 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -738,6 +738,24 @@ void brcmf_remove_interface(struct brcmf - brcmf_del_if(ifp->drvr, ifp->bsscfgidx, rtnl_locked); - } - -+static int brcmf_psm_watchdog_notify(struct brcmf_if *ifp, -+ const struct brcmf_event_msg *evtmsg, -+ void *data) -+{ -+ int err; -+ -+ brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx); -+ -+ brcmf_err("PSM's watchdog has fired!\n"); -+ -+ err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data, -+ evtmsg->datalen); -+ if (err) -+ brcmf_err("Failed to get memory dump, %d\n", err); -+ -+ return err; -+} -+ - #ifdef CONFIG_INET - #define ARPOL_MAX_ENTRIES 8 - static int brcmf_inetaddr_changed(struct notifier_block *nb, -@@ -917,6 +935,10 @@ int brcmf_attach(struct device *dev, str - goto fail; - } - -+ /* Attach to events important for core code */ -+ brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG, -+ brcmf_psm_watchdog_notify); -+ - /* attach firmware event handler */ - brcmf_fweh_attach(drvr); - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.c -@@ -27,8 +27,8 @@ - - static struct dentry *root_folder; - --static int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data, -- size_t len) -+int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data, -+ size_t len) - { - void *dump; - size_t ramsize; -@@ -54,24 +54,6 @@ static int brcmf_debug_create_memdump(st - return 0; - } - --static int brcmf_debug_psm_watchdog_notify(struct brcmf_if *ifp, -- const struct brcmf_event_msg *evtmsg, -- void *data) --{ -- int err; -- -- brcmf_dbg(TRACE, "enter: bsscfgidx=%d\n", ifp->bsscfgidx); -- -- brcmf_err("PSM's watchdog has fired!\n"); -- -- err = brcmf_debug_create_memdump(ifp->drvr->bus_if, data, -- evtmsg->datalen); -- if (err) -- brcmf_err("Failed to get memory dump, %d\n", err); -- -- return err; --} -- - void brcmf_debugfs_init(void) - { - root_folder = debugfs_create_dir(KBUILD_MODNAME, NULL); -@@ -99,9 +81,7 @@ int brcmf_debug_attach(struct brcmf_pub - if (IS_ERR(drvr->dbgfs_dir)) - return PTR_ERR(drvr->dbgfs_dir); - -- -- return brcmf_fweh_register(drvr, BRCMF_E_PSM_WATCHDOG, -- brcmf_debug_psm_watchdog_notify); -+ return 0; - } - - void brcmf_debug_detach(struct brcmf_pub *drvr) ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -@@ -99,6 +99,7 @@ do { \ - - extern int brcmf_msg_level; - -+struct brcmf_bus; - struct brcmf_pub; - #ifdef DEBUG - void brcmf_debugfs_init(void); -@@ -108,6 +109,8 @@ void brcmf_debug_detach(struct brcmf_pub - struct dentry *brcmf_debugfs_get_devdir(struct brcmf_pub *drvr); - int brcmf_debugfs_add_entry(struct brcmf_pub *drvr, const char *fn, - int (*read_fn)(struct seq_file *seq, void *data)); -+int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data, -+ size_t len); - #else - static inline void brcmf_debugfs_init(void) - { -@@ -128,6 +131,12 @@ int brcmf_debugfs_add_entry(struct brcmf - { - return 0; - } -+static inline -+int brcmf_debug_create_memdump(struct brcmf_bus *bus, const void *data, -+ size_t len) -+{ -+ return 0; -+} - #endif - - #endif /* BRCMFMAC_DEBUG_H */ diff --git a/package/kernel/mac80211/patches/323-0003-brcmfmac-Do-not-print-the-firmware-version-as-an-err.patch b/package/kernel/mac80211/patches/323-0003-brcmfmac-Do-not-print-the-firmware-version-as-an-err.patch deleted file mode 100644 index 3ab9b66e08..0000000000 --- a/package/kernel/mac80211/patches/323-0003-brcmfmac-Do-not-print-the-firmware-version-as-an-err.patch +++ /dev/null @@ -1,56 +0,0 @@ -From d79fe4cb70d8deab7b8dc1de547ed4b915574414 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Wed, 8 Mar 2017 14:50:15 +0100 -Subject: [PATCH] brcmfmac: Do not print the firmware version as an error - -Using pr_err for things which are not errors is a bad idea. E.g. it -will cause the plymouth bootsplash screen to drop back to the text -console so that the user can see the error, which is not what we -normally want to happen. - -Instead add a new brcmf_info macro and use that. - -Signed-off-by: Hans de Goede -Acked-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c | 2 +- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h | 9 +++++++++ - 2 files changed, 10 insertions(+), 1 deletion(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/common.c -@@ -161,7 +161,7 @@ int brcmf_c_preinit_dcmds(struct brcmf_i - strsep(&ptr, "\n"); - - /* Print fw version info */ -- brcmf_err("Firmware version = %s\n", buf); -+ brcmf_info("Firmware version = %s\n", buf); - - /* locate firmware version number for ethtool */ - ptr = strrchr(buf, ' ') + 1; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/debug.h -@@ -59,6 +59,10 @@ void __brcmf_err(const char *func, const - } while (0) - - #if defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) -+ -+/* For debug/tracing purposes treat info messages as errors */ -+#define brcmf_info brcmf_err -+ - __printf(3, 4) - void __brcmf_dbg(u32 level, const char *func, const char *fmt, ...); - #define brcmf_dbg(level, fmt, ...) \ -@@ -77,6 +81,11 @@ do { \ - - #else /* defined(DEBUG) || defined(CPTCFG_BRCM_TRACING) */ - -+#define brcmf_info(fmt, ...) \ -+ do { \ -+ pr_info("%s: " fmt, __func__, ##__VA_ARGS__); \ -+ } while (0) -+ - #define brcmf_dbg(level, fmt, ...) no_printk(fmt, ##__VA_ARGS__) - - #define BRCMF_DATA_ON() 0 diff --git a/package/kernel/mac80211/patches/323-0004-brcmfmac-Do-not-complain-about-country-code-00.patch b/package/kernel/mac80211/patches/323-0004-brcmfmac-Do-not-complain-about-country-code-00.patch deleted file mode 100644 index f4570e71b1..0000000000 --- a/package/kernel/mac80211/patches/323-0004-brcmfmac-Do-not-complain-about-country-code-00.patch +++ /dev/null @@ -1,28 +0,0 @@ -From 26e537884a8ef451f5c60f6949b1615069931ffa Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Wed, 8 Mar 2017 14:50:16 +0100 -Subject: [PATCH] brcmfmac: Do not complain about country code "00" - -The country code gets set to "00" by default at boot, ignore this -rather then logging an error about it. - -Signed-off-by: Hans de Goede -Acked-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 4 ++++ - 1 file changed, 4 insertions(+) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -6736,6 +6736,10 @@ static void brcmf_cfg80211_reg_notifier( - s32 err; - int i; - -+ /* The country code gets set to "00" by default at boot, ignore */ -+ if (req->alpha2[0] == '0' && req->alpha2[1] == '0') -+ return; -+ - /* ignore non-ISO3166 country codes */ - for (i = 0; i < sizeof(req->alpha2); i++) - if (req->alpha2[i] < 'A' || req->alpha2[i] > 'Z') { diff --git a/package/kernel/mac80211/patches/323-0005-brcmfmac-Handle-status-BRCMF_E_STATUS_ABORT-in-cfg80.patch b/package/kernel/mac80211/patches/323-0005-brcmfmac-Handle-status-BRCMF_E_STATUS_ABORT-in-cfg80.patch deleted file mode 100644 index 0f2d54e1dd..0000000000 --- a/package/kernel/mac80211/patches/323-0005-brcmfmac-Handle-status-BRCMF_E_STATUS_ABORT-in-cfg80.patch +++ /dev/null @@ -1,35 +0,0 @@ -From b9472a2e3e452c414634b3ccb1ef6c4098878686 Mon Sep 17 00:00:00 2001 -From: Hans de Goede -Date: Wed, 8 Mar 2017 14:50:17 +0100 -Subject: [PATCH] brcmfmac: Handle status == BRCMF_E_STATUS_ABORT in - cfg80211_escan_handler - -If a scan gets aborted BRCMF_SCAN_STATUS_BUSY gets cleared in -cfg->scan_status and when we receive an abort event from the firmware -the BRCMF_SCAN_STATUS_BUSY check in the cfg80211_escan_handler will -trigger resulting in multiple errors getting logged. - -Check for a status of BRCMF_E_STATUS_ABORT and in this case simply -cleanly exit the cfg80211_escan_handler. This also avoids a -BRCMF_E_STATUS_ABORT event arriving after a new scan has been started -causing the new scan to complete prematurely without any data. - -Signed-off-by: Hans de Goede -Acked-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c | 3 +++ - 1 file changed, 3 insertions(+) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -3097,6 +3097,9 @@ brcmf_cfg80211_escan_handler(struct brcm - - status = e->status; - -+ if (status == BRCMF_E_STATUS_ABORT) -+ goto exit; -+ - if (!test_bit(BRCMF_SCAN_STATUS_BUSY, &cfg->scan_status)) { - brcmf_err("scan not ready, bsscfgidx=%d\n", ifp->bsscfgidx); - return -EPERM; diff --git a/package/kernel/mac80211/patches/323-0006-brcmfmac-move-brcmf_txflowblock-to-bcdc-layer.patch b/package/kernel/mac80211/patches/323-0006-brcmfmac-move-brcmf_txflowblock-to-bcdc-layer.patch deleted file mode 100644 index b947cd1de9..0000000000 --- a/package/kernel/mac80211/patches/323-0006-brcmfmac-move-brcmf_txflowblock-to-bcdc-layer.patch +++ /dev/null @@ -1,137 +0,0 @@ -From 20ec4f57498f8770c7a1a3e2a316fa752a424178 Mon Sep 17 00:00:00 2001 -From: Franky Lin -Date: Fri, 10 Mar 2017 21:17:02 +0000 -Subject: [PATCH] brcmfmac: move brcmf_txflowblock to bcdc layer - -brcmf_txflowblock is invoked by sdio and usb bus module which are using -bcdc protocol. This patch makes it a bcdc API instead of a core module -function. - -Reviewed-by: Arend Van Spriel -Signed-off-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 10 ++++++++++ - drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h | 1 + - drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 2 -- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 10 ---------- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 5 +++-- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 5 +++-- - 6 files changed, 17 insertions(+), 16 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -@@ -345,6 +345,16 @@ brcmf_proto_bcdc_txdata(struct brcmf_pub - return brcmf_bus_txdata(drvr->bus_if, pktbuf); - } - -+void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state) -+{ -+ struct brcmf_bus *bus_if = dev_get_drvdata(dev); -+ struct brcmf_pub *drvr = bus_if->drvr; -+ -+ brcmf_dbg(TRACE, "Enter\n"); -+ -+ brcmf_fws_bus_blocked(drvr, state); -+} -+ - static void - brcmf_proto_bcdc_configure_addr_mode(struct brcmf_pub *drvr, int ifidx, - enum proto_addr_mode addr_mode) ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h -@@ -19,6 +19,7 @@ - #ifdef CPTCFG_BRCMFMAC_PROTO_BCDC - int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr); - void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr); -+void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state); - #else - static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; } - static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {} ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -@@ -229,8 +229,6 @@ int brcmf_attach(struct device *dev, str - void brcmf_detach(struct device *dev); - /* Indication from bus module that dongle should be reset */ - void brcmf_dev_reset(struct device *dev); --/* Indication from bus module to change flow-control state */ --void brcmf_txflowblock(struct device *dev, bool state); - - /* Notify the bus has transferred the tx packet to firmware */ - void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -283,16 +283,6 @@ void brcmf_txflowblock_if(struct brcmf_i - spin_unlock_irqrestore(&ifp->netif_stop_lock, flags); - } - --void brcmf_txflowblock(struct device *dev, bool state) --{ -- struct brcmf_bus *bus_if = dev_get_drvdata(dev); -- struct brcmf_pub *drvr = bus_if->drvr; -- -- brcmf_dbg(TRACE, "Enter\n"); -- -- brcmf_fws_bus_blocked(drvr, state); --} -- - void brcmf_netif_rx(struct brcmf_if *ifp, struct sk_buff *skb) - { - if (skb->pkt_type == PACKET_MULTICAST) ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -44,6 +44,7 @@ - #include "firmware.h" - #include "core.h" - #include "common.h" -+#include "bcdc.h" - - #define DCMD_RESP_TIMEOUT msecs_to_jiffies(2500) - #define CTL_DONE_TIMEOUT msecs_to_jiffies(2500) -@@ -2328,7 +2329,7 @@ static uint brcmf_sdio_sendfromq(struct - if ((bus->sdiodev->state == BRCMF_SDIOD_DATA) && - bus->txoff && (pktq_len(&bus->txq) < TXLOW)) { - bus->txoff = false; -- brcmf_txflowblock(bus->sdiodev->dev, false); -+ brcmf_proto_bcdc_txflowblock(bus->sdiodev->dev, false); - } - - return cnt; -@@ -2753,7 +2754,7 @@ static int brcmf_sdio_bus_txdata(struct - - if (pktq_len(&bus->txq) >= TXHI) { - bus->txoff = true; -- brcmf_txflowblock(dev, true); -+ brcmf_proto_bcdc_txflowblock(dev, true); - } - spin_unlock_bh(&bus->txq_lock); - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c -@@ -29,6 +29,7 @@ - #include "usb.h" - #include "core.h" - #include "common.h" -+#include "bcdc.h" - - - #define IOCTL_RESP_TIMEOUT msecs_to_jiffies(2000) -@@ -488,7 +489,7 @@ static void brcmf_usb_tx_complete(struct - spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags); - if (devinfo->tx_freecount > devinfo->tx_high_watermark && - devinfo->tx_flowblock) { -- brcmf_txflowblock(devinfo->dev, false); -+ brcmf_proto_bcdc_txflowblock(devinfo->dev, false); - devinfo->tx_flowblock = false; - } - spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags); -@@ -635,7 +636,7 @@ static int brcmf_usb_tx(struct device *d - spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags); - if (devinfo->tx_freecount < devinfo->tx_low_watermark && - !devinfo->tx_flowblock) { -- brcmf_txflowblock(dev, true); -+ brcmf_proto_bcdc_txflowblock(dev, true); - devinfo->tx_flowblock = true; - } - spin_unlock_irqrestore(&devinfo->tx_flowblock_lock, flags); diff --git a/package/kernel/mac80211/patches/323-0007-brcmfmac-move-brcmf_txcomplete-to-bcdc-layer.patch b/package/kernel/mac80211/patches/323-0007-brcmfmac-move-brcmf_txcomplete-to-bcdc-layer.patch deleted file mode 100644 index 9614e53e51..0000000000 --- a/package/kernel/mac80211/patches/323-0007-brcmfmac-move-brcmf_txcomplete-to-bcdc-layer.patch +++ /dev/null @@ -1,122 +0,0 @@ -From 7b584396b7a760bc77bbde4625f83ef173159d3e Mon Sep 17 00:00:00 2001 -From: Franky Lin -Date: Fri, 10 Mar 2017 21:17:03 +0000 -Subject: [PATCH] brcmfmac: move brcmf_txcomplete to bcdc layer - -brcmf_txcomplete is invoked by sdio and usb bus module which are using -bcdc protocol. So move it from core module into bcdc layer. - -Signed-off-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - .../net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 20 ++++++++++++++++++++ - .../net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h | 2 ++ - .../net/wireless/broadcom/brcm80211/brcmfmac/bus.h | 3 --- - .../net/wireless/broadcom/brcm80211/brcmfmac/core.c | 18 ------------------ - .../net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 3 ++- - .../net/wireless/broadcom/brcm80211/brcmfmac/usb.c | 2 +- - 6 files changed, 25 insertions(+), 23 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -@@ -355,6 +355,26 @@ void brcmf_proto_bcdc_txflowblock(struct - brcmf_fws_bus_blocked(drvr, state); - } - -+void -+brcmf_proto_bcdc_txcomplete(struct device *dev, struct sk_buff *txp, -+ bool success) -+{ -+ struct brcmf_bus *bus_if = dev_get_drvdata(dev); -+ struct brcmf_pub *drvr = bus_if->drvr; -+ struct brcmf_if *ifp; -+ -+ /* await txstatus signal for firmware if active */ -+ if (brcmf_fws_fc_active(drvr->fws)) { -+ if (!success) -+ brcmf_fws_bustxfail(drvr->fws, txp); -+ } else { -+ if (brcmf_proto_bcdc_hdrpull(drvr, false, txp, &ifp)) -+ brcmu_pkt_buf_free_skb(txp); -+ else -+ brcmf_txfinalize(ifp, txp, success); -+ } -+} -+ - static void - brcmf_proto_bcdc_configure_addr_mode(struct brcmf_pub *drvr, int ifidx, - enum proto_addr_mode addr_mode) ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.h -@@ -20,6 +20,8 @@ - int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr); - void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr); - void brcmf_proto_bcdc_txflowblock(struct device *dev, bool state); -+void brcmf_proto_bcdc_txcomplete(struct device *dev, struct sk_buff *txp, -+ bool success); - #else - static inline int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) { return 0; } - static inline void brcmf_proto_bcdc_detach(struct brcmf_pub *drvr) {} ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bus.h -@@ -230,9 +230,6 @@ void brcmf_detach(struct device *dev); - /* Indication from bus module that dongle should be reset */ - void brcmf_dev_reset(struct device *dev); - --/* Notify the bus has transferred the tx packet to firmware */ --void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success); -- - /* Configure the "global" bus state used by upper layers */ - void brcmf_bus_change_state(struct brcmf_bus *bus, enum brcmf_bus_state state); - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -383,24 +383,6 @@ void brcmf_txfinalize(struct brcmf_if *i - brcmu_pkt_buf_free_skb(txp); - } - --void brcmf_txcomplete(struct device *dev, struct sk_buff *txp, bool success) --{ -- struct brcmf_bus *bus_if = dev_get_drvdata(dev); -- struct brcmf_pub *drvr = bus_if->drvr; -- struct brcmf_if *ifp; -- -- /* await txstatus signal for firmware if active */ -- if (brcmf_fws_fc_active(drvr->fws)) { -- if (!success) -- brcmf_fws_bustxfail(drvr->fws, txp); -- } else { -- if (brcmf_proto_hdrpull(drvr, false, txp, &ifp)) -- brcmu_pkt_buf_free_skb(txp); -- else -- brcmf_txfinalize(ifp, txp, success); -- } --} -- - static void brcmf_ethtool_get_drvinfo(struct net_device *ndev, - struct ethtool_drvinfo *info) - { ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c -@@ -2266,7 +2266,8 @@ done: - bus->tx_seq = (bus->tx_seq + pktq->qlen) % SDPCM_SEQ_WRAP; - skb_queue_walk_safe(pktq, pkt_next, tmp) { - __skb_unlink(pkt_next, pktq); -- brcmf_txcomplete(bus->sdiodev->dev, pkt_next, ret == 0); -+ brcmf_proto_bcdc_txcomplete(bus->sdiodev->dev, pkt_next, -+ ret == 0); - } - return ret; - } ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/usb.c -@@ -483,7 +483,7 @@ static void brcmf_usb_tx_complete(struct - req->skb); - brcmf_usb_del_fromq(devinfo, req); - -- brcmf_txcomplete(devinfo->dev, req->skb, urb->status == 0); -+ brcmf_proto_bcdc_txcomplete(devinfo->dev, req->skb, urb->status == 0); - req->skb = NULL; - brcmf_usb_enq(devinfo, &devinfo->tx_freeq, req, &devinfo->tx_freecount); - spin_lock_irqsave(&devinfo->tx_flowblock_lock, flags); diff --git a/package/kernel/mac80211/patches/323-0008-brcmfmac-wrap-brcmf_fws_add_interface-into-bcdc-laye.patch b/package/kernel/mac80211/patches/323-0008-brcmfmac-wrap-brcmf_fws_add_interface-into-bcdc-laye.patch deleted file mode 100644 index a68c6ab0c3..0000000000 --- a/package/kernel/mac80211/patches/323-0008-brcmfmac-wrap-brcmf_fws_add_interface-into-bcdc-laye.patch +++ /dev/null @@ -1,95 +0,0 @@ -From 9fdc64bbdbe7bd546e0fbcedd2f1c03448c6df42 Mon Sep 17 00:00:00 2001 -From: Franky Lin -Date: Fri, 10 Mar 2017 21:17:04 +0000 -Subject: [PATCH] brcmfmac: wrap brcmf_fws_add_interface into bcdc layer - -fwsignal is only used by bcdc. Create a new protocol interface function -brcmf_proto_add_if for core module to notify protocol layer upon a new -interface is created. - -Signed-off-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 7 +++++++ - drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 2 +- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c | 3 ++- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h | 9 +++++++++ - 4 files changed, 19 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -@@ -399,6 +399,12 @@ static void brcmf_proto_bcdc_rxreorder(s - brcmf_fws_rxreorder(ifp, skb); - } - -+static void -+brcmf_proto_bcdc_add_if(struct brcmf_if *ifp) -+{ -+ brcmf_fws_add_interface(ifp); -+} -+ - int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) - { - struct brcmf_bcdc *bcdc; -@@ -422,6 +428,7 @@ int brcmf_proto_bcdc_attach(struct brcmf - drvr->proto->delete_peer = brcmf_proto_bcdc_delete_peer; - drvr->proto->add_tdls_peer = brcmf_proto_bcdc_add_tdls_peer; - drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder; -+ drvr->proto->add_if = brcmf_proto_bcdc_add_if; - drvr->proto->pd = bcdc; - - drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -990,7 +990,7 @@ int brcmf_bus_started(struct device *dev - if (ret < 0) - goto fail; - -- brcmf_fws_add_interface(ifp); -+ brcmf_proto_add_if(drvr, ifp); - - drvr->config = brcmf_cfg80211_attach(drvr, bus_if->dev, - drvr->settings->p2p_enable); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c -@@ -25,6 +25,7 @@ - #include "fwsignal.h" - #include "fweh.h" - #include "fwil.h" -+#include "proto.h" - - /** - * struct brcmf_fweh_queue_item - event item on event queue. -@@ -172,7 +173,7 @@ static void brcmf_fweh_handle_if_event(s - if (IS_ERR(ifp)) - return; - if (!is_p2pdev) -- brcmf_fws_add_interface(ifp); -+ brcmf_proto_add_if(drvr, ifp); - if (!drvr->fweh.evt_handler[BRCMF_E_IF]) - if (brcmf_net_attach(ifp, false) < 0) - return; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h -@@ -44,6 +44,7 @@ struct brcmf_proto { - void (*add_tdls_peer)(struct brcmf_pub *drvr, int ifidx, - u8 peer[ETH_ALEN]); - void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb); -+ void (*add_if)(struct brcmf_if *ifp); - void *pd; - }; - -@@ -118,4 +119,12 @@ brcmf_proto_rxreorder(struct brcmf_if *i - ifp->drvr->proto->rxreorder(ifp, skb); - } - -+static inline void -+brcmf_proto_add_if(struct brcmf_pub *drvr, struct brcmf_if *ifp) -+{ -+ if (!drvr->proto->add_if) -+ return; -+ drvr->proto->add_if(ifp); -+} -+ - #endif /* BRCMFMAC_PROTO_H */ diff --git a/package/kernel/mac80211/patches/323-0009-brcmfmac-wrap-brcmf_fws_del_interface-into-bcdc-laye.patch b/package/kernel/mac80211/patches/323-0009-brcmfmac-wrap-brcmf_fws_del_interface-into-bcdc-laye.patch deleted file mode 100644 index ded8d7b944..0000000000 --- a/package/kernel/mac80211/patches/323-0009-brcmfmac-wrap-brcmf_fws_del_interface-into-bcdc-laye.patch +++ /dev/null @@ -1,83 +0,0 @@ -From c02a5eb82056f75615cb48aa540bfd245f489b99 Mon Sep 17 00:00:00 2001 -From: Franky Lin -Date: Fri, 10 Mar 2017 21:17:05 +0000 -Subject: [PATCH] brcmfmac: wrap brcmf_fws_del_interface into bcdc layer - -Create a new protocol interface function brcmf_proto_del_if for core -module to notify protocol layer upon interface deletion. - -Signed-off-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 7 +++++++ - drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c | 4 ++-- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h | 9 +++++++++ - 3 files changed, 18 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -@@ -405,6 +405,12 @@ brcmf_proto_bcdc_add_if(struct brcmf_if - brcmf_fws_add_interface(ifp); - } - -+static void -+brcmf_proto_bcdc_del_if(struct brcmf_if *ifp) -+{ -+ brcmf_fws_del_interface(ifp); -+} -+ - int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) - { - struct brcmf_bcdc *bcdc; -@@ -429,6 +435,7 @@ int brcmf_proto_bcdc_attach(struct brcmf - drvr->proto->add_tdls_peer = brcmf_proto_bcdc_add_tdls_peer; - drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder; - drvr->proto->add_if = brcmf_proto_bcdc_add_if; -+ drvr->proto->del_if = brcmf_proto_bcdc_del_if; - drvr->proto->pd = bcdc; - - drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -706,7 +706,7 @@ void brcmf_remove_interface(struct brcmf - return; - brcmf_dbg(TRACE, "Enter, bsscfgidx=%d, ifidx=%d\n", ifp->bsscfgidx, - ifp->ifidx); -- brcmf_fws_del_interface(ifp); -+ brcmf_proto_del_if(ifp->drvr, ifp); - brcmf_del_if(ifp->drvr, ifp->bsscfgidx, rtnl_locked); - } - -@@ -1035,7 +1035,7 @@ fail: - drvr->config = NULL; - } - if (drvr->fws) { -- brcmf_fws_del_interface(ifp); -+ brcmf_proto_del_if(ifp->drvr, ifp); - brcmf_fws_deinit(drvr); - } - brcmf_net_detach(ifp->ndev, false); ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h -@@ -45,6 +45,7 @@ struct brcmf_proto { - u8 peer[ETH_ALEN]); - void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb); - void (*add_if)(struct brcmf_if *ifp); -+ void (*del_if)(struct brcmf_if *ifp); - void *pd; - }; - -@@ -127,4 +128,12 @@ brcmf_proto_add_if(struct brcmf_pub *drv - drvr->proto->add_if(ifp); - } - -+static inline void -+brcmf_proto_del_if(struct brcmf_pub *drvr, struct brcmf_if *ifp) -+{ -+ if (!drvr->proto->del_if) -+ return; -+ drvr->proto->del_if(ifp); -+} -+ - #endif /* BRCMFMAC_PROTO_H */ diff --git a/package/kernel/mac80211/patches/323-0010-brcmfmac-wrap-brcmf_fws_reset_interface-into-bcdc-la.patch b/package/kernel/mac80211/patches/323-0010-brcmfmac-wrap-brcmf_fws_reset_interface-into-bcdc-la.patch deleted file mode 100644 index 34e71d8f5c..0000000000 --- a/package/kernel/mac80211/patches/323-0010-brcmfmac-wrap-brcmf_fws_reset_interface-into-bcdc-la.patch +++ /dev/null @@ -1,82 +0,0 @@ -From 66ded1f8b33cdd9d6d3e20f5f8dd23615a110e70 Mon Sep 17 00:00:00 2001 -From: Franky Lin -Date: Fri, 10 Mar 2017 21:17:06 +0000 -Subject: [PATCH] brcmfmac: wrap brcmf_fws_reset_interface into bcdc layer - -Create a new protocol interface function brcmf_proto_reset_if for core -module to notify protocol layer when interface role changes. - -Signed-off-by: Franky Lin -Signed-off-by: Arend van Spriel -Signed-off-by: Kalle Valo ---- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c | 7 +++++++ - drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c | 3 +-- - drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h | 9 +++++++++ - 3 files changed, 17 insertions(+), 2 deletions(-) - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/bcdc.c -@@ -411,6 +411,12 @@ brcmf_proto_bcdc_del_if(struct brcmf_if - brcmf_fws_del_interface(ifp); - } - -+static void -+brcmf_proto_bcdc_reset_if(struct brcmf_if *ifp) -+{ -+ brcmf_fws_reset_interface(ifp); -+} -+ - int brcmf_proto_bcdc_attach(struct brcmf_pub *drvr) - { - struct brcmf_bcdc *bcdc; -@@ -436,6 +442,7 @@ int brcmf_proto_bcdc_attach(struct brcmf - drvr->proto->rxreorder = brcmf_proto_bcdc_rxreorder; - drvr->proto->add_if = brcmf_proto_bcdc_add_if; - drvr->proto->del_if = brcmf_proto_bcdc_del_if; -+ drvr->proto->reset_if = brcmf_proto_bcdc_reset_if; - drvr->proto->pd = bcdc; - - drvr->hdrlen += BCDC_HEADER_LEN + BRCMF_PROT_FW_SIGNAL_MAX_TXBYTES; ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/fweh.c -@@ -22,7 +22,6 @@ - #include "core.h" - #include "debug.h" - #include "tracepoint.h" --#include "fwsignal.h" - #include "fweh.h" - #include "fwil.h" - #include "proto.h" -@@ -180,7 +179,7 @@ static void brcmf_fweh_handle_if_event(s - } - - if (ifp && ifevent->action == BRCMF_E_IF_CHANGE) -- brcmf_fws_reset_interface(ifp); -+ brcmf_proto_reset_if(drvr, ifp); - - err = brcmf_fweh_call_event_handler(ifp, emsg->event_code, emsg, data); - ---- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h -+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/proto.h -@@ -46,6 +46,7 @@ struct brcmf_proto { - void (*rxreorder)(struct brcmf_if *ifp, struct sk_buff *skb); - void (*add_if)(struct brcmf_if *ifp); - void (*del_if)(struct brcmf_if *ifp); -+ void (*reset_if)(struct brcmf_if *ifp); - void *pd; - }; - -@@ -136,4 +137,12 @@ brcmf_proto_del_if(struct brcmf_pub *drv - drvr->proto->del_if(ifp); - } - -+static inline void -+brcmf_proto_reset_if(struct brcmf_pub *drvr, struct brcmf_if *ifp) -+{ -+ if (!drvr->proto->reset_if) -+ return; -+ drvr->proto->reset_if(ifp); -+} -+ - #endif /* BRCMFMAC_PROTO_H */ diff --git a/package/kernel/mac80211/patches/325-mac80211-unconditionally-start-new-netdev-queues-wit.patch b/package/kernel/mac80211/patches/325-mac80211-unconditionally-start-new-netdev-queues-wit.patch deleted file mode 100644 index ff7bbcb645..0000000000 --- a/package/kernel/mac80211/patches/325-mac80211-unconditionally-start-new-netdev-queues-wit.patch +++ /dev/null @@ -1,29 +0,0 @@ -From: Johannes Berg -Date: Wed, 29 Mar 2017 14:15:24 +0200 -Subject: [PATCH] mac80211: unconditionally start new netdev queues with iTXQ - support - -When internal mac80211 TXQs aren't supported, netdev queues must -always started out started even when driver queues are stopped -while the interface is added. This is necessary because with the -internal TXQ support netdev queues are never stopped and packet -scheduling/dropping is done in mac80211. - -Cc: stable@vger.kernel.org # 4.9+ -Fixes: 80a83cfc434b1 ("mac80211: skip netdev queue control with software queuing") -Reported-and-tested-by: Sven Eckelmann -Signed-off-by: Johannes Berg ---- - ---- a/net/mac80211/iface.c -+++ b/net/mac80211/iface.c -@@ -727,7 +727,8 @@ int ieee80211_do_open(struct wireless_de - ieee80211_recalc_ps(local); - - if (sdata->vif.type == NL80211_IFTYPE_MONITOR || -- sdata->vif.type == NL80211_IFTYPE_AP_VLAN) { -+ sdata->vif.type == NL80211_IFTYPE_AP_VLAN || -+ local->ops->wake_tx_queue) { - /* XXX: for AP_VLAN, actually track AP queues */ - netif_tx_start_all_queues(dev); - } else if (dev) { diff --git a/package/kernel/mac80211/patches/326-ath9k-fix-ar934x-OTP-offsets.patch b/package/kernel/mac80211/patches/326-ath9k-fix-ar934x-OTP-offsets.patch deleted file mode 100644 index 60de2b6d14..0000000000 --- a/package/kernel/mac80211/patches/326-ath9k-fix-ar934x-OTP-offsets.patch +++ /dev/null @@ -1,42 +0,0 @@ -From: Christian Lamparter -Date: Tue, 14 Feb 2017 20:10:30 +0100 -Subject: ath9k: use correct OTP register offsets for the AR9340 and AR9550 - -This patch fixes the OTP register definitions for the AR934x and AR9550 -WMAC SoC. - -Previously, the ath9k driver was unable to initialize the integrated -WMAC on an Aerohive AP121: - -| ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 -| ath: phy0: timeout (1000 us) on reg 0x30018: 0xbadc0ffe & 0x00000007 != 0x00000004 -| ath: phy0: Unable to initialize hardware; initialization status: -5 -| ath9k ar934x_wmac: failed to initialize device -| ath9k: probe of ar934x_wmac failed with error -5 - -It turns out that the AR9300_OTP_STATUS and AR9300_OTP_DATA -definitions contain a typo. - -Fixes: add295a4afbdf5852d0 "ath9k: use correct OTP register offsets for AR9550" -Signed-off-by: Christian Lamparter -Signed-off-by: Chris Blake ---- - ---- a/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h -+++ b/drivers/net/wireless/ath/ath9k/ar9003_eeprom.h -@@ -75,13 +75,13 @@ - #define AR9300_OTP_BASE \ - ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30000 : 0x14000) - #define AR9300_OTP_STATUS \ -- ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x30018 : 0x15f18) -+ ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x31018 : 0x15f18) - #define AR9300_OTP_STATUS_TYPE 0x7 - #define AR9300_OTP_STATUS_VALID 0x4 - #define AR9300_OTP_STATUS_ACCESS_BUSY 0x2 - #define AR9300_OTP_STATUS_SM_BUSY 0x1 - #define AR9300_OTP_READ_DATA \ -- ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3001c : 0x15f1c) -+ ((AR_SREV_9340(ah) || AR_SREV_9550(ah)) ? 0x3101c : 0x15f1c) - - enum targetPowerHTRates { - HT_TARGET_RATE_0_8_16, diff --git a/package/kernel/mac80211/patches/327-ath10k-increase-BMI-timeout.patch b/package/kernel/mac80211/patches/327-ath10k-increase-BMI-timeout.patch deleted file mode 100644 index c9f493bcd8..0000000000 --- a/package/kernel/mac80211/patches/327-ath10k-increase-BMI-timeout.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Ben Greear -Date: Wed, 31 May 2017 14:21:19 +0300 -Subject: [PATCH] ath10k: increase BMI timeout - -When testing a 9888 chipset NIC, I notice it often takes -almost 2 seconds, and then many times OTP fails, probably due -to the two-second timeout. - -[ 2269.841842] ath10k_pci 0000:05:00.0: bmi cmd took: 1984 jiffies (HZ: 1000), rv: 0 -[ 2273.608185] ath10k_pci 0000:05:00.0: bmi cmd took: 1986 jiffies (HZ: 1000), rv: 0 -[ 2277.294732] ath10k_pci 0000:05:00.0: bmi cmd took: 1989 jiffies (HZ: 1000), rv: 0 - -So, increase the BMI timeout to 3 seconds. - -Signed-off-by: Ben Greear -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/ath/ath10k/bmi.h -+++ b/drivers/net/wireless/ath/ath10k/bmi.h -@@ -187,8 +187,8 @@ struct bmi_target_info { - u32 type; - }; - --/* in msec */ --#define BMI_COMMUNICATION_TIMEOUT_HZ (2 * HZ) -+/* in jiffies */ -+#define BMI_COMMUNICATION_TIMEOUT_HZ (3 * HZ) - - #define BMI_CE_NUM_TO_TARG 0 - #define BMI_CE_NUM_TO_HOST 1 diff --git a/package/kernel/mac80211/patches/328-ath10k-log-when-longer-bmi-cmds-happen.patch b/package/kernel/mac80211/patches/328-ath10k-log-when-longer-bmi-cmds-happen.patch deleted file mode 100644 index 500f72ff98..0000000000 --- a/package/kernel/mac80211/patches/328-ath10k-log-when-longer-bmi-cmds-happen.patch +++ /dev/null @@ -1,74 +0,0 @@ -From: Ben Greear -Date: Wed, 31 May 2017 14:21:21 +0300 -Subject: [PATCH] ath10k: log when longer bmi cmds happen - -This lets one have a clue that maybe timeouts are happening -when we just aren't waiting long enough. - -Signed-off-by: Ben Greear -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/ath/ath10k/pci.c -+++ b/drivers/net/wireless/ath/ath10k/pci.c -@@ -101,7 +101,8 @@ static int ath10k_pci_init_irq(struct at - static int ath10k_pci_deinit_irq(struct ath10k *ar); - static int ath10k_pci_request_irq(struct ath10k *ar); - static void ath10k_pci_free_irq(struct ath10k *ar); --static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe, -+static int ath10k_pci_bmi_wait(struct ath10k *ar, -+ struct ath10k_ce_pipe *tx_pipe, - struct ath10k_ce_pipe *rx_pipe, - struct bmi_xfer *xfer); - static int ath10k_pci_qca99x0_chip_reset(struct ath10k *ar); -@@ -1843,7 +1844,7 @@ int ath10k_pci_hif_exchange_bmi_msg(stru - if (ret) - goto err_resp; - -- ret = ath10k_pci_bmi_wait(ce_tx, ce_rx, &xfer); -+ ret = ath10k_pci_bmi_wait(ar, ce_tx, ce_rx, &xfer); - if (ret) { - u32 unused_buffer; - unsigned int unused_nbytes; -@@ -1910,23 +1911,37 @@ static void ath10k_pci_bmi_recv_data(str - xfer->rx_done = true; - } - --static int ath10k_pci_bmi_wait(struct ath10k_ce_pipe *tx_pipe, -+static int ath10k_pci_bmi_wait(struct ath10k *ar, -+ struct ath10k_ce_pipe *tx_pipe, - struct ath10k_ce_pipe *rx_pipe, - struct bmi_xfer *xfer) - { - unsigned long timeout = jiffies + BMI_COMMUNICATION_TIMEOUT_HZ; -+ unsigned long started = jiffies; -+ unsigned long dur; -+ int ret; - - while (time_before_eq(jiffies, timeout)) { - ath10k_pci_bmi_send_done(tx_pipe); - ath10k_pci_bmi_recv_data(rx_pipe); - -- if (xfer->tx_done && (xfer->rx_done == xfer->wait_for_resp)) -- return 0; -+ if (xfer->tx_done && (xfer->rx_done == xfer->wait_for_resp)) { -+ ret = 0; -+ goto out; -+ } - - schedule(); - } - -- return -ETIMEDOUT; -+ ret = -ETIMEDOUT; -+ -+out: -+ dur = jiffies - started; -+ if (dur > HZ) -+ ath10k_dbg(ar, ATH10K_DBG_BMI, -+ "bmi cmd took %lu jiffies hz %d ret %d\n", -+ dur, HZ, ret); -+ return ret; - } - - /* diff --git a/package/kernel/mac80211/patches/329-ath10k-add-BMI-parameters-to-fix-calibration-from-DT.patch b/package/kernel/mac80211/patches/329-ath10k-add-BMI-parameters-to-fix-calibration-from-DT.patch deleted file mode 100644 index 3fcf505e15..0000000000 --- a/package/kernel/mac80211/patches/329-ath10k-add-BMI-parameters-to-fix-calibration-from-DT.patch +++ /dev/null @@ -1,80 +0,0 @@ -From: Anilkumar Kolli -Date: Wed, 31 May 2017 14:21:27 +0300 -Subject: [PATCH] ath10k: add BMI parameters to fix calibration from - DT/pre-cal - -QCA99X0, QCA9888, QCA9984 supports calibration data in -either OTP or DT/pre-cal file. Current ath10k supports -Calibration data from OTP only. - -If caldata is loaded from DT/pre-cal file, fetching board id -and applying calibration parameters like tx power gets failed. - -error log: -[ 15.733663] ath10k_pci 0000:01:00.0: failed to fetch board file: -2 -[ 15.741474] ath10k_pci 0000:01:00.0: could not probe fw (-2) - -This patch adds calibration data support from DT/pre-cal -file. Below parameters are used to get board id and -applying calibration parameters from cal data. - - EEPROM[OTP] FLASH[DT/pre-cal file] -Cal param 0x700 0x10000 -Board id 0x10 0x8000 - -Tested on QCA9888 with pre-cal file. - -Signed-off-by: Anilkumar Kolli -Signed-off-by: Kalle Valo ---- - ---- a/drivers/net/wireless/ath/ath10k/bmi.h -+++ b/drivers/net/wireless/ath/ath10k/bmi.h -@@ -83,6 +83,8 @@ enum bmi_cmd_id { - #define BMI_NVRAM_SEG_NAME_SZ 16 - - #define BMI_PARAM_GET_EEPROM_BOARD_ID 0x10 -+#define BMI_PARAM_GET_FLASH_BOARD_ID 0x8000 -+#define BMI_PARAM_FLASH_SECTION_ALL 0x10000 - - #define ATH10K_BMI_BOARD_ID_FROM_OTP_MASK 0x7c00 - #define ATH10K_BMI_BOARD_ID_FROM_OTP_LSB 10 ---- a/drivers/net/wireless/ath/ath10k/core.c -+++ b/drivers/net/wireless/ath/ath10k/core.c -@@ -657,7 +657,7 @@ static int ath10k_core_get_board_id_from - { - u32 result, address; - u8 board_id, chip_id; -- int ret; -+ int ret, bmi_board_id_param; - - address = ar->hw_params.patch_load_addr; - -@@ -681,8 +681,13 @@ static int ath10k_core_get_board_id_from - return ret; - } - -- ret = ath10k_bmi_execute(ar, address, BMI_PARAM_GET_EEPROM_BOARD_ID, -- &result); -+ if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || -+ ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE) -+ bmi_board_id_param = BMI_PARAM_GET_FLASH_BOARD_ID; -+ else -+ bmi_board_id_param = BMI_PARAM_GET_EEPROM_BOARD_ID; -+ -+ ret = ath10k_bmi_execute(ar, address, bmi_board_id_param, &result); - if (ret) { - ath10k_err(ar, "could not execute otp for board id check: %d\n", - ret); -@@ -810,6 +815,11 @@ static int ath10k_download_and_run_otp(s - return ret; - } - -+ /* As of now pre-cal is valid for 10_4 variants */ -+ if (ar->cal_mode == ATH10K_PRE_CAL_MODE_DT || -+ ar->cal_mode == ATH10K_PRE_CAL_MODE_FILE) -+ bmi_otp_exe_param = BMI_PARAM_FLASH_SECTION_ALL; -+ - ret = ath10k_bmi_execute(ar, address, bmi_otp_exe_param, &result); - if (ret) { - ath10k_err(ar, "could not execute otp (%d)\n", ret); diff --git a/package/kernel/mac80211/patches/332-ath10k-Revert-disable-wake_tx_queue-for-older-devices.patch b/package/kernel/mac80211/patches/332-ath10k-Revert-disable-wake_tx_queue-for-older-devices.patch index b4e7862264..f1bd131f3e 100644 --- a/package/kernel/mac80211/patches/332-ath10k-Revert-disable-wake_tx_queue-for-older-devices.patch +++ b/package/kernel/mac80211/patches/332-ath10k-Revert-disable-wake_tx_queue-for-older-devices.patch @@ -9,7 +9,7 @@ in the hope that we've fixed all the performance problems now. --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c -@@ -8219,15 +8219,6 @@ int ath10k_mac_register(struct ath10k *a +@@ -8286,15 +8286,6 @@ int ath10k_mac_register(struct ath10k *a ath10k_warn(ar, "failed to initialise DFS pattern detector\n"); } diff --git a/package/kernel/mac80211/patches/402-ath_regd_optional.patch b/package/kernel/mac80211/patches/402-ath_regd_optional.patch index c8ede7f583..fae9b55529 100644 --- a/package/kernel/mac80211/patches/402-ath_regd_optional.patch +++ b/package/kernel/mac80211/patches/402-ath_regd_optional.patch @@ -27,7 +27,7 @@ if (!IS_ENABLED(CPTCFG_ATH_REG_DYNAMIC_USER_REG_HINTS)) return false; if (!dynamic_country_user_possible(reg)) -@@ -341,6 +347,9 @@ ath_reg_apply_beaconing_flags(struct wip +@@ -345,6 +351,9 @@ ath_reg_apply_beaconing_flags(struct wip struct ieee80211_channel *ch; unsigned int i; @@ -37,7 +37,7 @@ for (band = 0; band < NUM_NL80211_BANDS; band++) { if (!wiphy->bands[band]) continue; -@@ -374,6 +383,9 @@ ath_reg_apply_ir_flags(struct wiphy *wip +@@ -378,6 +387,9 @@ ath_reg_apply_ir_flags(struct wiphy *wip { struct ieee80211_supported_band *sband; @@ -47,7 +47,7 @@ sband = wiphy->bands[NL80211_BAND_2GHZ]; if (!sband) return; -@@ -402,6 +414,9 @@ static void ath_reg_apply_radar_flags(st +@@ -407,6 +419,9 @@ static void ath_reg_apply_radar_flags(st struct ieee80211_channel *ch; unsigned int i; @@ -57,7 +57,7 @@ if (!wiphy->bands[NL80211_BAND_5GHZ]) return; -@@ -539,6 +554,11 @@ void ath_reg_notifier_apply(struct wiphy +@@ -544,6 +559,11 @@ void ath_reg_notifier_apply(struct wiphy ath_reg_dyn_country(wiphy, reg, request); break; } @@ -69,7 +69,7 @@ } EXPORT_SYMBOL(ath_reg_notifier_apply); -@@ -634,6 +654,10 @@ ath_regd_init_wiphy(struct ath_regulator +@@ -639,6 +659,10 @@ ath_regd_init_wiphy(struct ath_regulator const struct ieee80211_regdomain *regd; wiphy->reg_notifier = reg_notifier; @@ -80,7 +80,7 @@ wiphy->regulatory_flags |= REGULATORY_STRICT_REG | REGULATORY_CUSTOM_REG; -@@ -762,10 +786,7 @@ ath_regd_init(struct ath_regulatory *reg +@@ -767,10 +791,7 @@ ath_regd_init(struct ath_regulatory *reg if (r) return r; @@ -104,9 +104,9 @@ config ATH_DEBUG bool "Atheros wireless debugging" ---help--- ---- a/.local-symbols -+++ b/.local-symbols -@@ -130,6 +130,7 @@ ADM8211= +--- a/local-symbols ++++ b/local-symbols +@@ -82,6 +82,7 @@ ADM8211= ATH_COMMON= WLAN_VENDOR_ATH= ATH_DEBUG= diff --git a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch index 469da90160..457c0cb28c 100644 --- a/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch +++ b/package/kernel/mac80211/patches/404-regd_no_assoc_hints.patch @@ -1,6 +1,6 @@ --- a/net/wireless/reg.c +++ b/net/wireless/reg.c -@@ -2398,6 +2398,8 @@ void regulatory_hint_country_ie(struct w +@@ -2497,6 +2497,8 @@ void regulatory_hint_country_ie(struct w enum environment_cap env = ENVIRON_ANY; struct regulatory_request *request = NULL, *lr; @@ -9,7 +9,7 @@ /* IE len must be evenly divisible by 2 */ if (country_ie_len & 0x01) return; -@@ -2604,6 +2606,7 @@ static void restore_regulatory_settings( +@@ -2703,6 +2705,7 @@ static void restore_regulatory_settings( void regulatory_hint_disconnect(void) { diff --git a/package/kernel/mac80211/patches/406-ath_relax_default_regd.patch b/package/kernel/mac80211/patches/406-ath_relax_default_regd.patch index 35b0f2b76e..44e8f3281c 100644 --- a/package/kernel/mac80211/patches/406-ath_relax_default_regd.patch +++ b/package/kernel/mac80211/patches/406-ath_relax_default_regd.patch @@ -39,7 +39,7 @@ bool ath_is_world_regd(struct ath_regulatory *reg) { return is_wwr_sku(ath_regd_get_eepromRD(reg)); -@@ -658,6 +666,9 @@ ath_regd_init_wiphy(struct ath_regulator +@@ -663,6 +671,9 @@ ath_regd_init_wiphy(struct ath_regulator if (IS_ENABLED(CPTCFG_ATH_USER_REGD)) return 0; diff --git a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch index 1d249a9723..3ae01a5c35 100644 --- a/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch +++ b/package/kernel/mac80211/patches/440-ath5k_channel_bw_debugfs.patch @@ -109,7 +109,7 @@ drivers/net/wireless/ath/ath5k/debug.c | 86 ++++++++++++++++++++++++++++++++ /* debugfs: queues etc */ -@@ -1009,6 +1100,9 @@ ath5k_debug_init_device(struct ath5k_hw +@@ -1012,6 +1103,9 @@ ath5k_debug_init_device(struct ath5k_hw debugfs_create_file("beacon", S_IWUSR | S_IRUSR, phydir, ah, &fops_beacon); diff --git a/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch b/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch index f21eed18c3..b6dc45cd96 100644 --- a/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch +++ b/package/kernel/mac80211/patches/500-ath9k_eeprom_debugfs.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -1315,6 +1315,53 @@ void ath9k_deinit_debug(struct ath_softc +@@ -1374,6 +1374,53 @@ void ath9k_deinit_debug(struct ath_softc ath9k_cmn_spectral_deinit_debug(&sc->spec_priv); } @@ -54,7 +54,7 @@ int ath9k_init_debug(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); -@@ -1334,6 +1381,8 @@ int ath9k_init_debug(struct ath_hw *ah) +@@ -1393,6 +1440,8 @@ int ath9k_init_debug(struct ath_hw *ah) ath9k_tx99_init_debug(sc); ath9k_cmn_spectral_init_debug(&sc->spec_priv, sc->debug.debugfs_phy); diff --git a/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch b/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch index d076e3c2eb..53225dbc36 100644 --- a/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch +++ b/package/kernel/mac80211/patches/501-ath9k_ahb_init.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -1086,23 +1086,23 @@ static int __init ath9k_init(void) +@@ -1088,23 +1088,23 @@ static int __init ath9k_init(void) { int error; diff --git a/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch b/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch index c98072bac9..2ebb73d689 100644 --- a/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch +++ b/package/kernel/mac80211/patches/512-ath9k_channelbw_debugfs.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -1362,6 +1362,52 @@ static const struct file_operations fops +@@ -1421,6 +1421,52 @@ static const struct file_operations fops .owner = THIS_MODULE }; @@ -53,7 +53,7 @@ int ath9k_init_debug(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); -@@ -1383,6 +1429,8 @@ int ath9k_init_debug(struct ath_hw *ah) +@@ -1442,6 +1488,8 @@ int ath9k_init_debug(struct ath_hw *ah) debugfs_create_file("eeprom", S_IRUSR, sc->debug.debugfs_phy, sc, &fops_eeprom); @@ -74,7 +74,7 @@ --- a/drivers/net/wireless/ath/ath9k/common.c +++ b/drivers/net/wireless/ath/ath9k/common.c -@@ -296,11 +296,13 @@ EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_ke +@@ -297,11 +297,13 @@ EXPORT_SYMBOL(ath9k_cmn_get_hw_crypto_ke /* * Update internal channel flags. */ @@ -89,7 +89,7 @@ ichan->channel = chan->center_freq; ichan->chan = chan; -@@ -308,7 +310,19 @@ static void ath9k_cmn_update_ichannel(st +@@ -309,7 +311,19 @@ static void ath9k_cmn_update_ichannel(st if (chan->band == NL80211_BAND_5GHZ) flags |= CHANNEL_5GHZ; @@ -110,7 +110,7 @@ case NL80211_CHAN_WIDTH_5: flags |= CHANNEL_QUARTER; break; -@@ -341,10 +355,11 @@ struct ath9k_channel *ath9k_cmn_get_chan +@@ -342,10 +356,11 @@ struct ath9k_channel *ath9k_cmn_get_chan struct cfg80211_chan_def *chandef) { struct ieee80211_channel *curchan = chandef->chan; diff --git a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch index 59daf4fe11..fdeaed05e8 100644 --- a/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch +++ b/package/kernel/mac80211/patches/513-ath9k_add_pci_ids.patch @@ -20,7 +20,7 @@ #define AR9160_DEVID_PCI 0x0027 --- a/drivers/net/wireless/ath/ath9k/pci.c +++ b/drivers/net/wireless/ath/ath9k/pci.c -@@ -763,6 +763,7 @@ static const struct pci_device_id ath_pc +@@ -773,6 +773,7 @@ static const struct pci_device_id ath_pc .driver_data = ATH9K_PCI_BT_ANT_DIV }, #endif diff --git a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch index 9a0f6f5dbd..01de325b92 100644 --- a/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch +++ b/package/kernel/mac80211/patches/522-mac80211_configure_antenna_gain.patch @@ -1,6 +1,6 @@ --- a/include/net/cfg80211.h +++ b/include/net/cfg80211.h -@@ -2660,6 +2660,7 @@ struct cfg80211_nan_func { +@@ -2750,6 +2750,7 @@ struct cfg80211_pmk_conf { * (as advertised by the nl80211 feature flag.) * @get_tx_power: store the current TX power into the dbm variable; * return 0 if successful @@ -8,7 +8,7 @@ * * @set_wds_peer: set the WDS peer for a WDS interface * -@@ -2940,6 +2941,7 @@ struct cfg80211_ops { +@@ -3041,6 +3042,7 @@ struct cfg80211_ops { enum nl80211_tx_power_setting type, int mbm); int (*get_tx_power)(struct wiphy *wiphy, struct wireless_dev *wdev, int *dbm); @@ -18,7 +18,7 @@ const u8 *addr); --- a/include/net/mac80211.h +++ b/include/net/mac80211.h -@@ -1325,6 +1325,7 @@ enum ieee80211_smps_mode { +@@ -1338,6 +1338,7 @@ enum ieee80211_smps_mode { * * @power_level: requested transmit power (in dBm), backward compatibility * value only that is set to the minimum of all interfaces @@ -26,7 +26,7 @@ * * @chandef: the channel definition to tune to * @radar_enabled: whether radar detection is enabled -@@ -1345,6 +1346,7 @@ enum ieee80211_smps_mode { +@@ -1358,6 +1359,7 @@ enum ieee80211_smps_mode { struct ieee80211_conf { u32 flags; int power_level, dynamic_ps_timeout; @@ -36,9 +36,9 @@ u8 ps_dtim_period; --- a/include/uapi/linux/nl80211.h +++ b/include/uapi/linux/nl80211.h -@@ -2002,6 +2002,9 @@ enum nl80211_commands { - * u32 attribute with an &enum nl80211_timeout_reason value. This is used, - * e.g., with %NL80211_CMD_CONNECT event. +@@ -2139,6 +2139,9 @@ enum nl80211_commands { + * the driver or is not needed (because roaming used the Fast Transition + * protocol). * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. @@ -46,9 +46,9 @@ * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -2413,6 +2416,8 @@ enum nl80211_attrs { - - NL80211_ATTR_TIMEOUT_REASON, +@@ -2565,6 +2568,8 @@ enum nl80211_attrs { + NL80211_ATTR_PMKR0_NAME, + NL80211_ATTR_PORT_AUTHORIZED, + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + @@ -57,7 +57,7 @@ __NL80211_ATTR_AFTER_LAST, --- a/net/mac80211/cfg.c +++ b/net/mac80211/cfg.c -@@ -2396,6 +2396,19 @@ static int ieee80211_get_tx_power(struct +@@ -2444,6 +2444,19 @@ static int ieee80211_get_tx_power(struct return 0; } @@ -77,7 +77,7 @@ static int ieee80211_set_wds_peer(struct wiphy *wiphy, struct net_device *dev, const u8 *addr) { -@@ -3627,6 +3640,7 @@ const struct cfg80211_ops mac80211_confi +@@ -3717,6 +3730,7 @@ const struct cfg80211_ops mac80211_confi .set_wiphy_params = ieee80211_set_wiphy_params, .set_tx_power = ieee80211_set_tx_power, .get_tx_power = ieee80211_get_tx_power, @@ -87,7 +87,7 @@ CFG80211_TESTMODE_CMD(ieee80211_testmode_cmd) --- a/net/mac80211/ieee80211_i.h +++ b/net/mac80211/ieee80211_i.h -@@ -1370,6 +1370,7 @@ struct ieee80211_local { +@@ -1347,6 +1347,7 @@ struct ieee80211_local { int dynamic_ps_forced_timeout; int user_power_level; /* in dBm, for all interfaces */ @@ -119,7 +119,7 @@ if (local->hw.conf.power_level != power) { changed |= IEEE80211_CONF_CHANGE_POWER; local->hw.conf.power_level = power; -@@ -589,6 +595,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_ +@@ -592,6 +598,7 @@ struct ieee80211_hw *ieee80211_alloc_hw_ IEEE80211_RADIOTAP_MCS_HAVE_BW; local->hw.radiotap_vht_details = IEEE80211_RADIOTAP_VHT_KNOWN_GI | IEEE80211_RADIOTAP_VHT_KNOWN_BANDWIDTH; @@ -129,15 +129,15 @@ local->user_power_level = IEEE80211_UNSET_POWER_LEVEL; --- a/net/wireless/nl80211.c +++ b/net/wireless/nl80211.c -@@ -424,6 +424,7 @@ static const struct nla_policy nl80211_p - .len = sizeof(struct nl80211_bss_select_rssi_adjust) - }, - [NL80211_ATTR_TIMEOUT_REASON] = { .type = NLA_U32 }, +@@ -420,6 +420,7 @@ static const struct nla_policy nl80211_p + [NL80211_ATTR_FILS_CACHE_ID] = { .len = 2 }, + [NL80211_ATTR_PMK] = { .type = NLA_BINARY, .len = PMK_MAX_LEN }, + [NL80211_ATTR_SCHED_SCAN_MULTI] = { .type = NLA_FLAG }, + [NL80211_ATTR_WIPHY_ANTENNA_GAIN] = { .type = NLA_U32 }, }; /* policy for the key attributes */ -@@ -2385,6 +2386,20 @@ static int nl80211_set_wiphy(struct sk_b +@@ -2378,6 +2379,20 @@ static int nl80211_set_wiphy(struct sk_b if (result) return result; } diff --git a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch index b3b51b4433..8ea2f79a20 100644 --- a/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch +++ b/package/kernel/mac80211/patches/530-ath9k_extra_leds.patch @@ -181,7 +181,7 @@ --- a/drivers/net/wireless/ath/ath9k/init.c +++ b/drivers/net/wireless/ath/ath9k/init.c -@@ -998,7 +998,7 @@ int ath9k_init_device(u16 devid, struct +@@ -1000,7 +1000,7 @@ int ath9k_init_device(u16 devid, struct #ifdef CPTCFG_MAC80211_LEDS /* must be initialized before ieee80211_register_hw */ @@ -192,7 +192,7 @@ #endif --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -1407,6 +1407,61 @@ static const struct file_operations fops +@@ -1466,6 +1466,61 @@ static const struct file_operations fops .llseek = default_llseek, }; @@ -254,7 +254,7 @@ int ath9k_init_debug(struct ath_hw *ah) { -@@ -1431,6 +1486,10 @@ int ath9k_init_debug(struct ath_hw *ah) +@@ -1490,6 +1545,10 @@ int ath9k_init_debug(struct ath_hw *ah) &fops_eeprom); debugfs_create_file("chanbw", S_IRUSR | S_IWUSR, sc->debug.debugfs_phy, sc, &fops_chanbw); diff --git a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch index 3e687792da..7cf589485e 100644 --- a/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch +++ b/package/kernel/mac80211/patches/542-ath9k_debugfs_diag.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath9k/debug.c +++ b/drivers/net/wireless/ath/ath9k/debug.c -@@ -1463,6 +1463,50 @@ static const struct file_operations fops +@@ -1522,6 +1522,50 @@ static const struct file_operations fops #endif @@ -51,7 +51,7 @@ int ath9k_init_debug(struct ath_hw *ah) { struct ath_common *common = ath9k_hw_common(ah); -@@ -1490,6 +1534,8 @@ int ath9k_init_debug(struct ath_hw *ah) +@@ -1549,6 +1593,8 @@ int ath9k_init_debug(struct ath_hw *ah) debugfs_create_file("gpio_led", S_IWUSR, sc->debug.debugfs_phy, sc, &fops_gpio_led); #endif @@ -75,16 +75,16 @@ struct ath9k_hw_version { u32 magic; u16 devid; -@@ -805,6 +811,8 @@ struct ath_hw { - u32 rfkill_polarity; +@@ -806,6 +812,8 @@ struct ath_hw { u32 ah_flags; + s16 nf_override; + unsigned long diag; + bool reset_power_on; bool htc_reset_init; -@@ -1067,6 +1075,7 @@ void ath9k_hw_check_nav(struct ath_hw *a +@@ -1068,6 +1076,7 @@ void ath9k_hw_check_nav(struct ath_hw *a bool ath9k_hw_check_alive(struct ath_hw *ah); bool ath9k_hw_setpower(struct ath_hw *ah, enum ath9k_power_mode mode); diff --git a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch index 6f7370203b..f9d3251c22 100644 --- a/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch +++ b/package/kernel/mac80211/patches/543-ath9k_entropy_from_adc.patch @@ -18,7 +18,7 @@ void (*spectral_scan_trigger)(struct ath_hw *ah); --- a/drivers/net/wireless/ath/ath9k/ar9003_phy.c +++ b/drivers/net/wireless/ath/ath9k/ar9003_phy.c -@@ -1947,6 +1947,26 @@ void ar9003_hw_init_rate_txpower(struct +@@ -1945,6 +1945,26 @@ void ar9003_hw_init_rate_txpower(struct } } @@ -45,7 +45,7 @@ void ar9003_hw_attach_phy_ops(struct ath_hw *ah) { struct ath_hw_private_ops *priv_ops = ath9k_hw_private_ops(ah); -@@ -1983,6 +2003,7 @@ void ar9003_hw_attach_phy_ops(struct ath +@@ -1981,6 +2001,7 @@ void ar9003_hw_attach_phy_ops(struct ath priv_ops->set_radar_params = ar9003_hw_set_radar_params; priv_ops->fast_chan_change = ar9003_hw_fast_chan_change; @@ -65,8 +65,8 @@ } static const struct ieee80211_iface_limit if_limits[] = { -@@ -958,6 +959,18 @@ static void ath9k_set_hw_capab(struct at - SET_IEEE80211_PERM_ADDR(hw, common->macaddr); +@@ -960,6 +961,18 @@ static void ath9k_set_hw_capab(struct at + wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); } +static void ath_get_initial_entropy(struct ath_softc *sc) @@ -84,7 +84,7 @@ int ath9k_init_device(u16 devid, struct ath_softc *sc, const struct ath_bus_ops *bus_ops) { -@@ -1003,6 +1016,8 @@ int ath9k_init_device(u16 devid, struct +@@ -1005,6 +1018,8 @@ int ath9k_init_device(u16 devid, struct ARRAY_SIZE(ath9k_tpt_blink)); #endif diff --git a/package/kernel/mac80211/patches/551-ath9k_ubnt_uap_plus_hsr.patch b/package/kernel/mac80211/patches/551-ath9k_ubnt_uap_plus_hsr.patch index bcb0026a69..6d541d6a57 100644 --- a/package/kernel/mac80211/patches/551-ath9k_ubnt_uap_plus_hsr.patch +++ b/package/kernel/mac80211/patches/551-ath9k_ubnt_uap_plus_hsr.patch @@ -384,9 +384,9 @@ }; #endif /* _LINUX_ATH9K_PLATFORM_H */ ---- a/.local-symbols -+++ b/.local-symbols -@@ -157,6 +157,7 @@ ATH9K_WOW= +--- a/local-symbols ++++ b/local-symbols +@@ -109,6 +109,7 @@ ATH9K_WOW= ATH9K_RFKILL= ATH9K_CHANNEL_CONTEXT= ATH9K_PCOEM= diff --git a/package/kernel/mac80211/patches/600-02-rt2x00-rt2800lib-enable-support-for-RT3883.patch b/package/kernel/mac80211/patches/600-02-rt2x00-rt2800lib-enable-support-for-RT3883.patch index dc0f19490e..5127c5cfe4 100644 --- a/package/kernel/mac80211/patches/600-02-rt2x00-rt2800lib-enable-support-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-02-rt2x00-rt2800lib-enable-support-for-RT3883.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9397,6 +9397,7 @@ static int rt2800_probe_rt(struct rt2x00 +@@ -9403,6 +9403,7 @@ static int rt2800_probe_rt(struct rt2x00 case RT3390: case RT3572: case RT3593: diff --git a/package/kernel/mac80211/patches/600-03-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch b/package/kernel/mac80211/patches/600-03-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch index 45fc964504..60e57c1bae 100644 --- a/package/kernel/mac80211/patches/600-03-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch +++ b/package/kernel/mac80211/patches/600-03-rt2x00-rt2800lib-add-rf_vals-for-RF3853.patch @@ -31,7 +31,7 @@ Signed-off-by: Gabor Juhos #define RF5362 0x5362 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8975,6 +8975,66 @@ static const struct rf_channel rf_vals_3 +@@ -8981,6 +8981,66 @@ static const struct rf_channel rf_vals_3 {14, 0xF0, 2, 0x18}, }; @@ -98,7 +98,7 @@ Signed-off-by: Gabor Juhos static const struct rf_channel rf_vals_5592_xtal20[] = { /* Channel, N, K, mod, R */ {1, 482, 4, 10, 3}, -@@ -9238,6 +9298,11 @@ static int rt2800_probe_hw_mode(struct r +@@ -9244,6 +9304,11 @@ static int rt2800_probe_hw_mode(struct r spec->channels = rf_vals_3x; break; @@ -108,5 +108,5 @@ Signed-off-by: Gabor Juhos + break; + case RF5592: - rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX, ®); + reg = rt2800_register_read(rt2x00dev, MAC_DEBUG_INDEX); if (rt2x00_get_field32(reg, MAC_DEBUG_INDEX_XTAL)) { diff --git a/package/kernel/mac80211/patches/600-04-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch b/package/kernel/mac80211/patches/600-04-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch index fb32b75d0a..def2c397fd 100644 --- a/package/kernel/mac80211/patches/600-04-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch +++ b/package/kernel/mac80211/patches/600-04-rt2x00-rt2800lib-enable-VCO-calibration-for-RF3853.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -4871,6 +4871,7 @@ void rt2800_vco_calibration(struct rt2x0 +@@ -4881,6 +4881,7 @@ void rt2800_vco_calibration(struct rt2x0 case RF3053: case RF3070: case RF3290: @@ -18,7 +18,7 @@ Signed-off-by: Gabor Juhos case RF5350: case RF5360: case RF5362: -@@ -9420,6 +9421,7 @@ static int rt2800_probe_hw_mode(struct r +@@ -9426,6 +9427,7 @@ static int rt2800_probe_hw_mode(struct r case RF3053: case RF3070: case RF3290: diff --git a/package/kernel/mac80211/patches/600-05-rt2x00-rt2800lib-add-channel-configuration-function-.patch b/package/kernel/mac80211/patches/600-05-rt2x00-rt2800lib-add-channel-configuration-function-.patch index 266a3fba50..1d6e312037 100644 --- a/package/kernel/mac80211/patches/600-05-rt2x00-rt2800lib-add-channel-configuration-function-.patch +++ b/package/kernel/mac80211/patches/600-05-rt2x00-rt2800lib-add-channel-configuration-function-.patch @@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -2709,6 +2709,211 @@ static void rt2800_config_channel_rf3053 +@@ -2713,6 +2713,211 @@ static void rt2800_config_channel_rf3053 } } @@ -50,7 +50,7 @@ Signed-off-by: Gabor Juhos + + rt2800_rfcsr_write(rt2x00dev, 13, 0x12); + -+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_TX0_PD, 0); + rt2x00_set_field8(&rfcsr, RFCSR1_RX1_PD, 0); @@ -87,7 +87,7 @@ Signed-off-by: Gabor Juhos + + rt2800_freq_cal_mode1(rt2x00dev); + -+ rt2800_rfcsr_read(rt2x00dev, 30, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 30); + if (!conf_is_ht40(conf)) + rfcsr &= ~(0x06); + else @@ -110,7 +110,7 @@ Signed-off-by: Gabor Juhos + rt2800_rfcsr_write(rt2x00dev, 34, 0x20); + + /* loopback RF_BS */ -+ rt2800_rfcsr_read(rt2x00dev, 36, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 36); + if (rf->channel <= 14) + rt2x00_set_field8(&rfcsr, RFCSR36_RF_BS, 1); + else @@ -158,13 +158,13 @@ Signed-off-by: Gabor Juhos + + rt2800_rfcsr_write(rt2x00dev, 50, 0x86); + -+ rt2800_rfcsr_read(rt2x00dev, 51, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 51); + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 51, 0x75); + else + rt2800_rfcsr_write(rt2x00dev, 51, 0x51); + -+ rt2800_rfcsr_read(rt2x00dev, 52, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 52); + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 52, 0x45); + else @@ -194,25 +194,25 @@ Signed-off-by: Gabor Juhos + ((info->default_power2 & 0xe0) >> 1); + rt2800_bbp_write(rt2x00dev, 109, bbp); + -+ rt2800_bbp_read(rt2x00dev, 110, &bbp); ++ bbp = rt2800_bbp_read(rt2x00dev, 110); + bbp &= 0x0f; + bbp |= (info->default_power3 & 0xe0) >> 1; + rt2800_bbp_write(rt2x00dev, 110, bbp); + -+ rt2800_rfcsr_read(rt2x00dev, 57, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 57); + if (rf->channel <= 14) + rt2800_rfcsr_write(rt2x00dev, 57, 0x6e); + else + rt2800_rfcsr_write(rt2x00dev, 57, 0x3e); + + /* Enable RF tuning */ -+ rt2800_rfcsr_read(rt2x00dev, 3, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 3); + rt2x00_set_field8(&rfcsr, RFCSR3_VCOCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 3, rfcsr); + + udelay(2000); + -+ rt2800_bbp_read(rt2x00dev, 49, &bbp); ++ bbp = rt2800_bbp_read(rt2x00dev, 49); + /* clear update flag */ + rt2800_bbp_write(rt2x00dev, 49, bbp & 0xfe); + rt2800_bbp_write(rt2x00dev, 49, bbp); @@ -223,7 +223,7 @@ Signed-off-by: Gabor Juhos #define POWER_BOUND 0x27 #define POWER_BOUND_5G 0x2b -@@ -3567,6 +3772,9 @@ static void rt2800_config_channel(struct +@@ -3570,6 +3775,9 @@ static void rt2800_config_channel(struct case RF3322: rt2800_config_channel_rf3322(rt2x00dev, conf, rf, info); break; diff --git a/package/kernel/mac80211/patches/600-06-rt2x00-rt2800lib-enable-RF3853-support.patch b/package/kernel/mac80211/patches/600-06-rt2x00-rt2800lib-enable-RF3853-support.patch index 53e6bbb155..6476dc107b 100644 --- a/package/kernel/mac80211/patches/600-06-rt2x00-rt2800lib-enable-RF3853-support.patch +++ b/package/kernel/mac80211/patches/600-06-rt2x00-rt2800lib-enable-RF3853-support.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8900,6 +8900,7 @@ static int rt2800_init_eeprom(struct rt2 +@@ -8906,6 +8906,7 @@ static int rt2800_init_eeprom(struct rt2 case RF3290: case RF3320: case RF3322: diff --git a/package/kernel/mac80211/patches/600-07-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch b/package/kernel/mac80211/patches/600-07-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch index cfa95e56bc..0a931e2026 100644 --- a/package/kernel/mac80211/patches/600-07-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch +++ b/package/kernel/mac80211/patches/600-07-rt2x00-rt2800lib-add-MAC-register-initialization-for.patch @@ -35,7 +35,7 @@ Signed-off-by: Gabor Juhos #define RX_FILTER_CFG 0x1400 --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -5501,6 +5501,12 @@ static int rt2800_init_registers(struct +@@ -5509,6 +5509,12 @@ static int rt2800_init_registers(struct rt2800_register_write(rt2x00dev, TX_SW_CFG2, 0x00000000); } @@ -48,7 +48,7 @@ Signed-off-by: Gabor Juhos } else if (rt2x00_rt(rt2x00dev, RT5390) || rt2x00_rt(rt2x00dev, RT5392) || rt2x00_rt(rt2x00dev, RT6352)) { -@@ -5714,6 +5720,11 @@ static int rt2800_init_registers(struct +@@ -5722,6 +5728,11 @@ static int rt2800_init_registers(struct reg = rt2x00_rt(rt2x00dev, RT5592) ? 0x00000082 : 0x00000002; rt2800_register_write(rt2x00dev, TXOP_HLDR_ET, reg); @@ -57,6 +57,6 @@ Signed-off-by: Gabor Juhos + rt2800_register_write(rt2x00dev, TX_FBK_CFG_3S_1, 0x16151413); + } + - rt2800_register_read(rt2x00dev, TX_RTS_CFG, ®); + reg = rt2800_register_read(rt2x00dev, TX_RTS_CFG); rt2x00_set_field32(®, TX_RTS_CFG_AUTO_RTS_RETRY_LIMIT, 7); rt2x00_set_field32(®, TX_RTS_CFG_RTS_THRES, diff --git a/package/kernel/mac80211/patches/600-09-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch b/package/kernel/mac80211/patches/600-09-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch index 6adb9e1cd2..99f57bcd33 100644 --- a/package/kernel/mac80211/patches/600-09-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch +++ b/package/kernel/mac80211/patches/600-09-rt2x00-rt2800lib-add-BBP-register-initialization-for.patch @@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -6341,6 +6341,47 @@ static void rt2800_init_bbp_3593(struct +@@ -6349,6 +6349,47 @@ static void rt2800_init_bbp_3593(struct rt2800_bbp_write(rt2x00dev, 103, 0xc0); } @@ -59,7 +59,7 @@ Signed-off-by: Gabor Juhos static void rt2800_init_bbp_53xx(struct rt2x00_dev *rt2x00dev) { int ant, div_mode; -@@ -6785,6 +6826,9 @@ static void rt2800_init_bbp(struct rt2x0 +@@ -6792,6 +6833,9 @@ static void rt2800_init_bbp(struct rt2x0 case RT3593: rt2800_init_bbp_3593(rt2x00dev); return; diff --git a/package/kernel/mac80211/patches/600-10-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch b/package/kernel/mac80211/patches/600-10-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch index aa3ead6ee8..c0f1f5863b 100644 --- a/package/kernel/mac80211/patches/600-10-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-10-rt2x00-rt2800lib-add-RFCSR-initialization-for-RT3883.patch @@ -21,7 +21,7 @@ Signed-off-by: Gabor Juhos #define RFCSR2_TX2_EN_MT7620 FIELD8(0x20) --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -7701,6 +7701,144 @@ static void rt2800_init_rfcsr_5350(struc +@@ -7707,6 +7707,144 @@ static void rt2800_init_rfcsr_5350(struc rt2800_rfcsr_write(rt2x00dev, 63, 0x00); } @@ -134,7 +134,7 @@ Signed-off-by: Gabor Juhos + rt2800_rfcsr_write(rt2x00dev, 33, 0x32); + } + -+ rt2800_rfcsr_read(rt2x00dev, 2, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 2); + rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_BP, 0); + rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); @@ -142,23 +142,23 @@ Signed-off-by: Gabor Juhos + rt2x00_set_field8(&rfcsr, RFCSR2_RESCAL_EN, 0); + rt2800_rfcsr_write(rt2x00dev, 2, rfcsr); + -+ rt2800_rfcsr_read(rt2x00dev, 1, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 1); + rt2x00_set_field8(&rfcsr, RFCSR1_RF_BLOCK_EN, 1); + rt2800_rfcsr_write(rt2x00dev, 1, rfcsr); + -+ rt2800_rfcsr_read(rt2x00dev, 6, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 6); + rfcsr |= 0xc0; + rt2800_rfcsr_write(rt2x00dev, 6, rfcsr); + -+ rt2800_rfcsr_read(rt2x00dev, 22, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 22); + rfcsr |= 0x20; + rt2800_rfcsr_write(rt2x00dev, 22, rfcsr); + -+ rt2800_rfcsr_read(rt2x00dev, 46, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 46); + rfcsr |= 0x20; + rt2800_rfcsr_write(rt2x00dev, 46, rfcsr); + -+ rt2800_rfcsr_read(rt2x00dev, 20, &rfcsr); ++ rfcsr = rt2800_rfcsr_read(rt2x00dev, 20); + rfcsr &= ~0xee; + rt2800_rfcsr_write(rt2x00dev, 20, rfcsr); +} @@ -166,7 +166,7 @@ Signed-off-by: Gabor Juhos static void rt2800_init_rfcsr_5390(struct rt2x00_dev *rt2x00dev) { rt2800_rf_init_calibration(rt2x00dev, 2); -@@ -8543,6 +8681,9 @@ static void rt2800_init_rfcsr(struct rt2 +@@ -8549,6 +8687,9 @@ static void rt2800_init_rfcsr(struct rt2 case RT3390: rt2800_init_rfcsr_3390(rt2x00dev); break; diff --git a/package/kernel/mac80211/patches/600-11-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch b/package/kernel/mac80211/patches/600-11-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch index 0e9496c056..e74f399e65 100644 --- a/package/kernel/mac80211/patches/600-11-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch +++ b/package/kernel/mac80211/patches/600-11-rt2x00-rt2800lib-use-the-extended-EEPROM-map-for-RT3.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -376,7 +376,8 @@ static unsigned int rt2800_eeprom_word_i +@@ -381,7 +381,8 @@ static unsigned int rt2800_eeprom_word_i wiphy_name(rt2x00dev->hw->wiphy), word)) return 0; diff --git a/package/kernel/mac80211/patches/600-12-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch b/package/kernel/mac80211/patches/600-12-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch index 0ac7b040ec..2e917c8ebf 100644 --- a/package/kernel/mac80211/patches/600-12-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch +++ b/package/kernel/mac80211/patches/600-12-rt2x00-rt2800lib-force-rf-type-to-RF3853-on-RT3883.patch @@ -10,8 +10,8 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9077,6 +9077,8 @@ static int rt2800_init_eeprom(struct rt2 - rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID, &rf); +@@ -9083,6 +9083,8 @@ static int rt2800_init_eeprom(struct rt2 + rf = rt2800_eeprom_read(rt2x00dev, EEPROM_CHIP_ID); else if (rt2x00_rt(rt2x00dev, RT3352)) rf = RF3322; + else if (rt2x00_rt(rt2x00dev, RT3883)) diff --git a/package/kernel/mac80211/patches/600-13-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch b/package/kernel/mac80211/patches/600-13-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch index dc34a96d99..0bb2d33577 100644 --- a/package/kernel/mac80211/patches/600-13-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch +++ b/package/kernel/mac80211/patches/600-13-rt2x00-rt2800lib-add-channel-configuration-code-for-.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -3735,6 +3735,36 @@ static char rt2800_txpower_to_dev(struct +@@ -3738,6 +3738,36 @@ static char rt2800_txpower_to_dev(struct return clamp_t(char, txpower, MIN_A_TXPOWER, MAX_A_TXPOWER); } @@ -47,7 +47,7 @@ Signed-off-by: Gabor Juhos static void rt2800_config_channel(struct rt2x00_dev *rt2x00dev, struct ieee80211_conf *conf, struct rf_channel *rf, -@@ -3753,6 +3783,12 @@ static void rt2800_config_channel(struct +@@ -3756,6 +3786,12 @@ static void rt2800_config_channel(struct rt2800_txpower_to_dev(rt2x00dev, rf->channel, info->default_power3); @@ -60,7 +60,7 @@ Signed-off-by: Gabor Juhos switch (rt2x00dev->chip.rf) { case RF2020: case RF3020: -@@ -3857,6 +3893,15 @@ static void rt2800_config_channel(struct +@@ -3860,6 +3896,15 @@ static void rt2800_config_channel(struct rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); rt2800_bbp_write(rt2x00dev, 64, 0x37 - rt2x00dev->lna_gain); rt2800_bbp_write(rt2x00dev, 77, 0x98); @@ -76,7 +76,7 @@ Signed-off-by: Gabor Juhos } else { rt2800_bbp_write(rt2x00dev, 62, 0x37 - rt2x00dev->lna_gain); rt2800_bbp_write(rt2x00dev, 63, 0x37 - rt2x00dev->lna_gain); -@@ -3870,6 +3915,7 @@ static void rt2800_config_channel(struct +@@ -3873,6 +3918,7 @@ static void rt2800_config_channel(struct !rt2x00_rt(rt2x00dev, RT6352)) { if (rt2x00_has_cap_external_lna_bg(rt2x00dev)) { rt2800_bbp_write(rt2x00dev, 82, 0x62); @@ -84,7 +84,7 @@ Signed-off-by: Gabor Juhos rt2800_bbp_write(rt2x00dev, 75, 0x46); } else { if (rt2x00_rt(rt2x00dev, RT3593)) -@@ -3878,19 +3924,22 @@ static void rt2800_config_channel(struct +@@ -3881,19 +3927,22 @@ static void rt2800_config_channel(struct rt2800_bbp_write(rt2x00dev, 82, 0x84); rt2800_bbp_write(rt2x00dev, 75, 0x50); } @@ -110,7 +110,7 @@ Signed-off-by: Gabor Juhos rt2800_bbp_write(rt2x00dev, 83, 0x9a); if (rt2x00_has_cap_external_lna_a(rt2x00dev)) -@@ -4013,6 +4062,23 @@ static void rt2800_config_channel(struct +@@ -4019,6 +4068,23 @@ static void rt2800_config_channel(struct rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, reg); diff --git a/package/kernel/mac80211/patches/600-14-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch b/package/kernel/mac80211/patches/600-14-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch index e93d2dd96f..56157510eb 100644 --- a/package/kernel/mac80211/patches/600-14-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch +++ b/package/kernel/mac80211/patches/600-14-rt2x00-rt2800lib-fix-txpower_to_dev-function-for-RT3.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -3722,13 +3722,15 @@ static char rt2800_txpower_to_dev(struct +@@ -3725,13 +3725,15 @@ static char rt2800_txpower_to_dev(struct unsigned int channel, char txpower) { diff --git a/package/kernel/mac80211/patches/600-15-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch b/package/kernel/mac80211/patches/600-15-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch index 463346eec4..c1409bcfa3 100644 --- a/package/kernel/mac80211/patches/600-15-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch +++ b/package/kernel/mac80211/patches/600-15-rt2x00-rt2800lib-use-correct-txpower-calculation-fun.patch @@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -5101,7 +5101,8 @@ static void rt2800_config_txpower(struct +@@ -5111,7 +5111,8 @@ static void rt2800_config_txpower(struct struct ieee80211_channel *chan, int power_level) { diff --git a/package/kernel/mac80211/patches/600-16-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch b/package/kernel/mac80211/patches/600-16-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch index 3efac12246..a4ccb28518 100644 --- a/package/kernel/mac80211/patches/600-16-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch +++ b/package/kernel/mac80211/patches/600-16-rt2x00-rt2800lib-hardcode-txmixer-gain-values-to-zer.patch @@ -11,7 +11,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -8959,7 +8959,8 @@ static u8 rt2800_get_txmixer_gain_24g(st +@@ -8965,7 +8965,8 @@ static u8 rt2800_get_txmixer_gain_24g(st { u16 word; @@ -20,8 +20,8 @@ Signed-off-by: Gabor Juhos + rt2x00_rt(rt2x00dev, RT3883)) return 0; - rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG, &word); -@@ -8973,7 +8974,8 @@ static u8 rt2800_get_txmixer_gain_5g(str + word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_BG); +@@ -8979,7 +8980,8 @@ static u8 rt2800_get_txmixer_gain_5g(str { u16 word; @@ -30,4 +30,4 @@ Signed-off-by: Gabor Juhos + rt2x00_rt(rt2x00dev, RT3883)) return 0; - rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A, &word); + word = rt2800_eeprom_read(rt2x00dev, EEPROM_TXMIXER_GAIN_A); diff --git a/package/kernel/mac80211/patches/600-17-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch b/package/kernel/mac80211/patches/600-17-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch index 9d12c76255..197aabd7bc 100644 --- a/package/kernel/mac80211/patches/600-17-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-17-rt2x00-rt2800lib-use-correct-RT-XWI-size-for-RT3883.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -587,6 +587,7 @@ void rt2800_get_txwi_rxwi_size(struct rt +@@ -591,6 +591,7 @@ void rt2800_get_txwi_rxwi_size(struct rt { switch (rt2x00dev->chip.rt) { case RT3593: diff --git a/package/kernel/mac80211/patches/600-18-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch b/package/kernel/mac80211/patches/600-18-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch index cd212f9d8d..24c0ef91b0 100644 --- a/package/kernel/mac80211/patches/600-18-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch +++ b/package/kernel/mac80211/patches/600-18-rt2x00-rt2800lib-fix-antenna-configuration-for-RT388.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -2013,7 +2013,8 @@ void rt2800_config_ant(struct rt2x00_dev +@@ -2017,7 +2017,8 @@ void rt2800_config_ant(struct rt2x00_dev rt2800_bbp_write(rt2x00dev, 3, r3); rt2800_bbp_write(rt2x00dev, 1, r1); diff --git a/package/kernel/mac80211/patches/600-19-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch b/package/kernel/mac80211/patches/600-19-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch index 30ea12a5cd..52733ffeb9 100644 --- a/package/kernel/mac80211/patches/600-19-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch +++ b/package/kernel/mac80211/patches/600-19-rt2x00-rt2800lib-fix-LNA-gain-configuration-for-RT38.patch @@ -10,23 +10,23 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -2036,7 +2036,8 @@ static void rt2800_config_lna_gain(struc - rt2800_eeprom_read(rt2x00dev, EEPROM_LNA, &eeprom); +@@ -2040,7 +2040,8 @@ static void rt2800_config_lna_gain(struc + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_LNA); lna_gain = rt2x00_get_field16(eeprom, EEPROM_LNA_A0); } else if (libconf->rf.channel <= 128) { - if (rt2x00_rt(rt2x00dev, RT3593)) { + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom); + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); lna_gain = rt2x00_get_field16(eeprom, EEPROM_EXT_LNA2_A1); -@@ -2046,7 +2047,8 @@ static void rt2800_config_lna_gain(struc +@@ -2050,7 +2051,8 @@ static void rt2800_config_lna_gain(struc EEPROM_RSSI_BG2_LNA_A1); } } else { - if (rt2x00_rt(rt2x00dev, RT3593)) { + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &eeprom); + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); lna_gain = rt2x00_get_field16(eeprom, EEPROM_EXT_LNA2_A2); diff --git a/package/kernel/mac80211/patches/600-20-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch b/package/kernel/mac80211/patches/600-20-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch index 8c563b8938..301928d283 100644 --- a/package/kernel/mac80211/patches/600-20-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-20-rt2x00-rt2800lib-fix-VGC-setup-for-RT3883.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -5354,7 +5354,8 @@ static u8 rt2800_get_default_vgc(struct +@@ -5364,7 +5364,8 @@ static u8 rt2800_get_default_vgc(struct else vgc = 0x2e + rt2x00dev->lna_gain; } else { /* 5GHZ band */ @@ -20,7 +20,7 @@ Signed-off-by: Gabor Juhos vgc = 0x20 + (rt2x00dev->lna_gain * 5) / 3; else if (rt2x00_rt(rt2x00dev, RT5592)) vgc = 0x24 + (2 * rt2x00dev->lna_gain); -@@ -5374,7 +5375,8 @@ static inline void rt2800_set_vgc(struct +@@ -5384,7 +5385,8 @@ static inline void rt2800_set_vgc(struct { if (qual->vgc_level != vgc_level) { if (rt2x00_rt(rt2x00dev, RT3572) || @@ -30,7 +30,7 @@ Signed-off-by: Gabor Juhos rt2800_bbp_write_with_rx_chain(rt2x00dev, 66, vgc_level); } else if (rt2x00_rt(rt2x00dev, RT5592)) { -@@ -5421,6 +5423,11 @@ void rt2800_link_tuner(struct rt2x00_dev +@@ -5431,6 +5433,11 @@ void rt2800_link_tuner(struct rt2x00_dev } break; diff --git a/package/kernel/mac80211/patches/600-21-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch b/package/kernel/mac80211/patches/600-21-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch index 6e9ef1071c..4bbc7ae44e 100644 --- a/package/kernel/mac80211/patches/600-21-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch +++ b/package/kernel/mac80211/patches/600-21-rt2x00-rt2800lib-fix-EEPROM-LNA-validation-for-RT388.patch @@ -10,8 +10,8 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -9092,7 +9092,8 @@ static int rt2800_validate_eeprom(struct - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2, &word); +@@ -9098,7 +9098,8 @@ static int rt2800_validate_eeprom(struct + word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_BG2); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_BG2_OFFSET2)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_BG2_OFFSET2, 0); - if (!rt2x00_rt(rt2x00dev, RT3593)) { @@ -20,8 +20,8 @@ Signed-off-by: Gabor Juhos if (rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0x00 || rt2x00_get_field16(word, EEPROM_RSSI_BG2_LNA_A1) == 0xff) rt2x00_set_field16(&word, EEPROM_RSSI_BG2_LNA_A1, -@@ -9112,7 +9113,8 @@ static int rt2800_validate_eeprom(struct - rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2, &word); +@@ -9118,7 +9119,8 @@ static int rt2800_validate_eeprom(struct + word = rt2800_eeprom_read(rt2x00dev, EEPROM_RSSI_A2); if (abs(rt2x00_get_field16(word, EEPROM_RSSI_A2_OFFSET2)) > 10) rt2x00_set_field16(&word, EEPROM_RSSI_A2_OFFSET2, 0); - if (!rt2x00_rt(rt2x00dev, RT3593)) { @@ -30,13 +30,13 @@ Signed-off-by: Gabor Juhos if (rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0x00 || rt2x00_get_field16(word, EEPROM_RSSI_A2_LNA_A2) == 0xff) rt2x00_set_field16(&word, EEPROM_RSSI_A2_LNA_A2, -@@ -9120,7 +9122,8 @@ static int rt2800_validate_eeprom(struct +@@ -9126,7 +9128,8 @@ static int rt2800_validate_eeprom(struct } rt2800_eeprom_write(rt2x00dev, EEPROM_RSSI_A2, word); - if (rt2x00_rt(rt2x00dev, RT3593)) { + if (rt2x00_rt(rt2x00dev, RT3593) || + rt2x00_rt(rt2x00dev, RT3883)) { - rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2, &word); + word = rt2800_eeprom_read(rt2x00dev, EEPROM_EXT_LNA2); if (rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0x00 || rt2x00_get_field16(word, EEPROM_EXT_LNA2_A1) == 0xff) diff --git a/package/kernel/mac80211/patches/600-22-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch b/package/kernel/mac80211/patches/600-22-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch index 1a8ccbc9bd..e752efd0ea 100644 --- a/package/kernel/mac80211/patches/600-22-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch +++ b/package/kernel/mac80211/patches/600-22-rt2x00-rt2800lib-fix-txpower-compensation-for-RT3883.patch @@ -10,7 +10,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -4348,6 +4348,9 @@ static u8 rt2800_compensate_txpower(stru +@@ -4354,6 +4354,9 @@ static u8 rt2800_compensate_txpower(stru if (rt2x00_rt(rt2x00dev, RT3593)) return min_t(u8, txpower, 0xc); diff --git a/package/kernel/mac80211/patches/600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch b/package/kernel/mac80211/patches/600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch index 7d8d2f5e13..342174f8d5 100644 --- a/package/kernel/mac80211/patches/600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch +++ b/package/kernel/mac80211/patches/600-23-rt2x00-rt2800mmio-add-a-workaround-for-spurious-TX_F.patch @@ -12,7 +12,7 @@ Signed-off-by: Gabor Juhos --- a/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800mmio.c -@@ -415,9 +415,9 @@ void rt2800mmio_autowake_tasklet(unsigne +@@ -424,9 +424,9 @@ void rt2800mmio_autowake_tasklet(unsigne } EXPORT_SYMBOL_GPL(rt2800mmio_autowake_tasklet); @@ -24,12 +24,12 @@ Signed-off-by: Gabor Juhos int i; /* -@@ -438,29 +438,77 @@ static void rt2800mmio_txstatus_interrup +@@ -447,29 +447,77 @@ static void rt2800mmio_txstatus_interrup * Since we have only one producer and one consumer we don't * need to lock the kfifo. */ - for (i = 0; i < rt2x00dev->tx->limit; i++) { -- rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status); +- status = rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO); - - if (!rt2x00_get_field32(status, TX_STA_FIFO_VALID)) - break; @@ -47,7 +47,7 @@ Signed-off-by: Gabor Juhos + if (++i >= rt2x00dev->tx->limit) + break; + -+ rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &status); ++ status = rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO); + } while (rt2x00_get_field32(status, TX_STA_FIFO_VALID)); /* Schedule the tasklet for processing the tx status. */ @@ -87,7 +87,7 @@ Signed-off-by: Gabor Juhos - /* Read status and ACK all interrupts */ + /* Read status */ - rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR, ®); + reg = rt2x00mmio_register_read(rt2x00dev, INT_SOURCE_CSR); + + if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) { + /* Due to unknown reason the hardware generates a @@ -96,7 +96,7 @@ Signed-off-by: Gabor Juhos + * here to see if we have to process the actual + * request. + */ -+ rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO, &txstatus); ++ txstatus = rt2x00mmio_register_read(rt2x00dev, TX_STA_FIFO); + if (rt2800mmio_txstatus_is_spurious(rt2x00dev, txstatus)) { + /* Remove the TX_FIFO_STATUS bit so it won't be + * processed in this turn. The hardware will @@ -111,7 +111,7 @@ Signed-off-by: Gabor Juhos rt2x00mmio_register_write(rt2x00dev, INT_SOURCE_CSR, reg); if (!reg) -@@ -477,7 +525,7 @@ irqreturn_t rt2800mmio_interrupt(int irq +@@ -486,7 +534,7 @@ irqreturn_t rt2800mmio_interrupt(int irq mask = ~reg; if (rt2x00_get_field32(reg, INT_SOURCE_CSR_TX_FIFO_STATUS)) { diff --git a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00eeprom.patch b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00eeprom.patch index 435cc96fc5..5ad99995c2 100644 --- a/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00eeprom.patch +++ b/package/kernel/mac80211/patches/602-rt2x00-introduce-rt2x00eeprom.patch @@ -1,6 +1,6 @@ ---- a/.local-symbols -+++ b/.local-symbols -@@ -336,6 +336,7 @@ RT2X00_LIB_FIRMWARE= +--- a/local-symbols ++++ b/local-symbols +@@ -291,6 +291,7 @@ RT2X00_LIB_FIRMWARE= RT2X00_LIB_CRYPTO= RT2X00_LIB_LEDS= RT2X00_LIB_DEBUGFS= @@ -55,9 +55,9 @@ +#include "rt2800.h" + struct rt2800_ops { - void (*register_read)(struct rt2x00_dev *rt2x00dev, - const unsigned int offset, u32 *value); -@@ -147,6 +149,15 @@ static inline int rt2800_read_eeprom(str + u32 (*register_read)(struct rt2x00_dev *rt2x00dev, + const unsigned int offset); +@@ -145,6 +147,15 @@ static inline int rt2800_read_eeprom(str { const struct rt2800_ops *rt2800ops = rt2x00dev->ops->drv; @@ -127,7 +127,7 @@ DECLARE_KFIFO_PTR(txstatus_fifo, u32); --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1418,6 +1418,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de +@@ -1421,6 +1421,10 @@ int rt2x00lib_probe_dev(struct rt2x00_de INIT_DELAYED_WORK(&rt2x00dev->autowakeup_work, rt2x00lib_autowakeup); INIT_WORK(&rt2x00dev->sleep_work, rt2x00lib_sleep); @@ -138,7 +138,7 @@ /* * Let the driver probe the device to detect the capabilities. */ -@@ -1556,6 +1560,11 @@ void rt2x00lib_remove_dev(struct rt2x00_ +@@ -1562,6 +1566,11 @@ void rt2x00lib_remove_dev(struct rt2x00_ * Free the driver data. */ kfree(rt2x00dev->drv_data); diff --git a/package/kernel/mac80211/patches/606-rt2x00-allow_disabling_bands_through_platform_data.patch b/package/kernel/mac80211/patches/606-rt2x00-allow_disabling_bands_through_platform_data.patch index c3cd2f4341..202dfc0b89 100644 --- a/package/kernel/mac80211/patches/606-rt2x00-allow_disabling_bands_through_platform_data.patch +++ b/package/kernel/mac80211/patches/606-rt2x00-allow_disabling_bands_through_platform_data.patch @@ -12,7 +12,7 @@ #endif /* _RT2X00_PLATFORM_H */ --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1023,6 +1023,22 @@ static int rt2x00lib_probe_hw_modes(stru +@@ -1026,6 +1026,22 @@ static int rt2x00lib_probe_hw_modes(stru unsigned int num_rates; unsigned int i; diff --git a/package/kernel/mac80211/patches/607-rt2x00-add_platform_data_mac_addr.patch b/package/kernel/mac80211/patches/607-rt2x00-add_platform_data_mac_addr.patch index bca7be8533..b8b0188040 100644 --- a/package/kernel/mac80211/patches/607-rt2x00-add_platform_data_mac_addr.patch +++ b/package/kernel/mac80211/patches/607-rt2x00-add_platform_data_mac_addr.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1001,8 +1001,13 @@ static void rt2x00lib_rate(struct ieee80 +@@ -1004,8 +1004,13 @@ static void rt2x00lib_rate(struct ieee80 void rt2x00lib_set_mac_address(struct rt2x00_dev *rt2x00dev, u8 *eeprom_mac_addr) { diff --git a/package/kernel/mac80211/patches/608-rt2x00-allow_disabling_bands_through_dts.patch b/package/kernel/mac80211/patches/608-rt2x00-allow_disabling_bands_through_dts.patch index 724e626ca9..ca66aa8e3b 100644 --- a/package/kernel/mac80211/patches/608-rt2x00-allow_disabling_bands_through_dts.patch +++ b/package/kernel/mac80211/patches/608-rt2x00-allow_disabling_bands_through_dts.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1027,6 +1027,16 @@ static int rt2x00lib_probe_hw_modes(stru +@@ -1030,6 +1030,16 @@ static int rt2x00lib_probe_hw_modes(stru struct ieee80211_rate *rates; unsigned int num_rates; unsigned int i; diff --git a/package/kernel/mac80211/patches/610-rt2x00-change-led-polarity-from-OF.patch b/package/kernel/mac80211/patches/610-rt2x00-change-led-polarity-from-OF.patch index 51890e0a3b..ad70aa7826 100644 --- a/package/kernel/mac80211/patches/610-rt2x00-change-led-polarity-from-OF.patch +++ b/package/kernel/mac80211/patches/610-rt2x00-change-led-polarity-from-OF.patch @@ -8,7 +8,7 @@ #include "rt2x00.h" #include "rt2800lib.h" -@@ -9279,6 +9280,17 @@ static int rt2800_init_eeprom(struct rt2 +@@ -9285,6 +9286,17 @@ static int rt2800_init_eeprom(struct rt2 rt2800_init_led(rt2x00dev, &rt2x00dev->led_assoc, LED_TYPE_ASSOC); rt2800_init_led(rt2x00dev, &rt2x00dev->led_qual, LED_TYPE_QUALITY); diff --git a/package/kernel/mac80211/patches/611-rt2x00-add-AP+STA-support.patch b/package/kernel/mac80211/patches/611-rt2x00-add-AP+STA-support.patch index 5ef5fc8def..062b18a63b 100644 --- a/package/kernel/mac80211/patches/611-rt2x00-add-AP+STA-support.patch +++ b/package/kernel/mac80211/patches/611-rt2x00-add-AP+STA-support.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2x00dev.c -@@ -1358,7 +1358,7 @@ static inline void rt2x00lib_set_if_comb +@@ -1361,7 +1361,7 @@ static inline void rt2x00lib_set_if_comb */ if_limit = &rt2x00dev->if_limits_ap; if_limit->max = rt2x00dev->ops->max_ap_intf; diff --git a/package/kernel/mac80211/patches/650-rt2x00-add-support-for-external-PA-on-MT7620.patch b/package/kernel/mac80211/patches/650-rt2x00-add-support-for-external-PA-on-MT7620.patch index 64a62f4b07..9fad80b672 100644 --- a/package/kernel/mac80211/patches/650-rt2x00-add-support-for-external-PA-on-MT7620.patch +++ b/package/kernel/mac80211/patches/650-rt2x00-add-support-for-external-PA-on-MT7620.patch @@ -25,7 +25,7 @@ Signed-off-by: Daniel Golle * EEPROM LNA --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -4114,6 +4114,61 @@ static void rt2800_config_channel(struct +@@ -4120,6 +4120,61 @@ static void rt2800_config_channel(struct rt2800_iq_calibrate(rt2x00dev, rf->channel); } @@ -34,11 +34,11 @@ Signed-off-by: Daniel Golle + &rt2x00dev->cap_flags)) { + rt2x00_warn(rt2x00dev, "Using incomplete support for " \ + "external PA\n"); -+ rt2800_register_read(rt2x00dev, RF_CONTROL3, ®); ++ reg = rt2800_register_read(rt2x00dev, RF_CONTROL3); + reg |= 0x00000101; + rt2800_register_write(rt2x00dev, RF_CONTROL3, reg); + -+ rt2800_register_read(rt2x00dev, RF_BYPASS3, ®); ++ reg = rt2800_register_read(rt2x00dev, RF_BYPASS3); + reg |= 0x00000101; + rt2800_register_write(rt2x00dev, RF_BYPASS3, reg); + @@ -84,12 +84,12 @@ Signed-off-by: Daniel Golle + } + } + - rt2800_bbp_read(rt2x00dev, 4, &bbp); + bbp = rt2800_bbp_read(rt2x00dev, 4); rt2x00_set_field8(&bbp, BBP4_BANDWIDTH, 2 * conf_is_ht40(conf)); rt2800_bbp_write(rt2x00dev, 4, bbp); -@@ -9308,7 +9363,8 @@ static int rt2800_init_eeprom(struct rt2 +@@ -9314,7 +9369,8 @@ static int rt2800_init_eeprom(struct rt2 */ - rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1, &eeprom); + eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF1); - if (rt2x00_rt(rt2x00dev, RT3352)) { + if (rt2x00_rt(rt2x00dev, RT3352) || @@ -97,11 +97,11 @@ Signed-off-by: Daniel Golle if (rt2x00_get_field16(eeprom, EEPROM_NIC_CONF1_EXTERNAL_TX0_PA_3352)) __set_bit(CAPABILITY_EXTERNAL_PA_TX0, -@@ -9319,6 +9375,18 @@ static int rt2800_init_eeprom(struct rt2 +@@ -9325,6 +9381,18 @@ static int rt2800_init_eeprom(struct rt2 &rt2x00dev->cap_flags); } -+ rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2, &eeprom); ++ eeprom = rt2800_eeprom_read(rt2x00dev, EEPROM_NIC_CONF2); + + if (rt2x00_rt(rt2x00dev, RT6352) && eeprom != 0 && eeprom != 0xffff) { + if (rt2x00_get_field16(eeprom, diff --git a/package/kernel/mac80211/patches/651-rt2x00-remove-unneccesary-code.patch b/package/kernel/mac80211/patches/651-rt2x00-remove-unneccesary-code.patch index b65bd7a73e..475fcbc223 100644 --- a/package/kernel/mac80211/patches/651-rt2x00-remove-unneccesary-code.patch +++ b/package/kernel/mac80211/patches/651-rt2x00-remove-unneccesary-code.patch @@ -75,7 +75,7 @@ Signed-off-by: Daniel Golle --- a/drivers/net/wireless/ralink/rt2x00/rt2800lib.c +++ b/drivers/net/wireless/ralink/rt2x00/rt2800lib.c -@@ -4127,38 +4127,22 @@ static void rt2800_config_channel(struct +@@ -4133,38 +4133,22 @@ static void rt2800_config_channel(struct reg |= 0x00000101; rt2800_register_write(rt2x00dev, RF_BYPASS3, reg); diff --git a/package/kernel/mac80211/patches/653-0002-rtl8xxxu-Add-initial-code-to-detect-8188eu-devices.patch b/package/kernel/mac80211/patches/653-0002-rtl8xxxu-Add-initial-code-to-detect-8188eu-devices.patch index f90ce492f0..71f93e9556 100644 --- a/package/kernel/mac80211/patches/653-0002-rtl8xxxu-Add-initial-code-to-detect-8188eu-devices.patch +++ b/package/kernel/mac80211/patches/653-0002-rtl8xxxu-Add-initial-code-to-detect-8188eu-devices.patch @@ -110,7 +110,7 @@ Signed-off-by: Jes Sorensen MODULE_FIRMWARE("rtlwifi/rtl8192cufw_A.bin"); MODULE_FIRMWARE("rtlwifi/rtl8192cufw_B.bin"); MODULE_FIRMWARE("rtlwifi/rtl8192cufw_TMSC.bin"); -@@ -6210,6 +6211,8 @@ static struct usb_device_id dev_table[] +@@ -6212,6 +6213,8 @@ static const struct usb_device_id dev_ta {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0xb720, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8723bu_fops}, #ifdef CPTCFG_RTL8XXXU_UNTESTED diff --git a/package/kernel/mac80211/patches/653-0045-rtl8xxxu-Add-rtl8188etv-to-USB-device-list.patch b/package/kernel/mac80211/patches/653-0045-rtl8xxxu-Add-rtl8188etv-to-USB-device-list.patch index 31c4b6535b..be5f72ff4d 100644 --- a/package/kernel/mac80211/patches/653-0045-rtl8xxxu-Add-rtl8188etv-to-USB-device-list.patch +++ b/package/kernel/mac80211/patches/653-0045-rtl8xxxu-Add-rtl8188etv-to-USB-device-list.patch @@ -13,7 +13,7 @@ Signed-off-by: Jes Sorensen --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c -@@ -6324,6 +6324,9 @@ static struct usb_device_id dev_table[] +@@ -6326,6 +6326,9 @@ static const struct usb_device_id dev_ta #ifdef CPTCFG_RTL8XXXU_UNTESTED {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x8179, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8188eu_fops}, diff --git a/package/kernel/mac80211/patches/653-0046-rtl8xxxu-Add-sitecom-dongle-to-USB-device-list.patch b/package/kernel/mac80211/patches/653-0046-rtl8xxxu-Add-sitecom-dongle-to-USB-device-list.patch index fa8ad28d97..b4898018f8 100644 --- a/package/kernel/mac80211/patches/653-0046-rtl8xxxu-Add-sitecom-dongle-to-USB-device-list.patch +++ b/package/kernel/mac80211/patches/653-0046-rtl8xxxu-Add-sitecom-dongle-to-USB-device-list.patch @@ -11,7 +11,7 @@ Signed-off-by: Jes Sorensen --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c -@@ -6327,6 +6327,9 @@ static struct usb_device_id dev_table[] +@@ -6329,6 +6329,9 @@ static const struct usb_device_id dev_ta /* Tested by Hans de Goede - rtl8188etv */ {USB_DEVICE_AND_INTERFACE_INFO(USB_VENDOR_ID_REALTEK, 0x0179, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8188eu_fops}, diff --git a/package/kernel/mac80211/patches/653-0049-rtl8xxxu-Add-rtl8188eu-USB-ID-for-D-Link-USB-GO-N150.patch b/package/kernel/mac80211/patches/653-0049-rtl8xxxu-Add-rtl8188eu-USB-ID-for-D-Link-USB-GO-N150.patch index 05c45ca24d..669fca6706 100644 --- a/package/kernel/mac80211/patches/653-0049-rtl8xxxu-Add-rtl8188eu-USB-ID-for-D-Link-USB-GO-N150.patch +++ b/package/kernel/mac80211/patches/653-0049-rtl8xxxu-Add-rtl8188eu-USB-ID-for-D-Link-USB-GO-N150.patch @@ -13,7 +13,7 @@ Signed-off-by: Jes Sorensen --- a/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c +++ b/drivers/net/wireless/realtek/rtl8xxxu/rtl8xxxu_core.c -@@ -6330,6 +6330,9 @@ static struct usb_device_id dev_table[] +@@ -6332,6 +6332,9 @@ static const struct usb_device_id dev_ta /* Sitecom rtl8188eus */ {USB_DEVICE_AND_INTERFACE_INFO(0x0df6, 0x0076, 0xff, 0xff, 0xff), .driver_info = (unsigned long)&rtl8188eu_fops}, diff --git a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch index 106ef706b8..cfde08d4ea 100644 --- a/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch +++ b/package/kernel/mac80211/patches/801-libertas-configure-sysfs-links.patch @@ -1,17 +1,17 @@ --- a/drivers/net/wireless/marvell/libertas/cfg.c +++ b/drivers/net/wireless/marvell/libertas/cfg.c -@@ -2127,6 +2127,8 @@ struct wireless_dev *lbs_cfg_alloc(struc +@@ -2043,6 +2043,8 @@ struct wireless_dev *lbs_cfg_alloc(struc goto err_wiphy_new; } + set_wiphy_dev(wdev->wiphy, dev); + - lbs_deb_leave(LBS_DEB_CFG80211); return wdev; + err_wiphy_new: --- a/drivers/net/wireless/marvell/libertas/main.c +++ b/drivers/net/wireless/marvell/libertas/main.c -@@ -986,6 +986,7 @@ struct lbs_private *lbs_add_card(void *c +@@ -933,6 +933,7 @@ struct lbs_private *lbs_add_card(void *c goto err_adapter; } diff --git a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch index 04b4954d29..b26505de21 100644 --- a/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch +++ b/package/kernel/mac80211/patches/802-libertas-set-wireless-macaddr.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/marvell/libertas/cfg.c +++ b/drivers/net/wireless/marvell/libertas/cfg.c -@@ -2217,6 +2217,8 @@ int lbs_cfg_register(struct lbs_private +@@ -2119,6 +2119,8 @@ int lbs_cfg_register(struct lbs_private wdev->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); wdev->wiphy->reg_notifier = lbs_reg_notifier; diff --git a/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch b/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch index fd9e6fd974..5ce49d3a07 100644 --- a/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch +++ b/package/kernel/mac80211/patches/810-b43-gpio-mask-module-option.patch @@ -10,8 +10,8 @@ struct b43_phy phy; --- a/drivers/net/wireless/broadcom/b43/main.c +++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -75,6 +75,11 @@ MODULE_FIRMWARE("b43/ucode16_mimo.fw"); - MODULE_FIRMWARE("b43/ucode5.fw"); +@@ -85,6 +85,11 @@ MODULE_FIRMWARE("b43/ucode40.fw"); + MODULE_FIRMWARE("b43/ucode42.fw"); MODULE_FIRMWARE("b43/ucode9.fw"); +static int modparam_gpiomask = 0x000F; @@ -22,7 +22,7 @@ static int modparam_bad_frames_preempt; module_param_named(bad_frames_preempt, modparam_bad_frames_preempt, int, 0444); MODULE_PARM_DESC(bad_frames_preempt, -@@ -2882,10 +2887,10 @@ static int b43_gpio_init(struct b43_wlde +@@ -2892,10 +2897,10 @@ static int b43_gpio_init(struct b43_wlde u32 mask, set; b43_maskset32(dev, B43_MMIO_MACCTL, ~B43_MACCTL_GPOUTSMSK, 0); diff --git a/package/kernel/mac80211/patches/811-b43_no_pio.patch b/package/kernel/mac80211/patches/811-b43_no_pio.patch index 79428c2784..d23387c8cd 100644 --- a/package/kernel/mac80211/patches/811-b43_no_pio.patch +++ b/package/kernel/mac80211/patches/811-b43_no_pio.patch @@ -11,7 +11,7 @@ b43-$(CPTCFG_B43_LEDS) += leds.o --- a/drivers/net/wireless/broadcom/b43/main.c +++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -2008,10 +2008,12 @@ static void b43_do_interrupt_thread(stru +@@ -2018,10 +2018,12 @@ static void b43_do_interrupt_thread(stru dma_reason[0], dma_reason[1], dma_reason[2], dma_reason[3], dma_reason[4], dma_reason[5]); diff --git a/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch b/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch index 33c9402f18..932c83b48e 100644 --- a/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch +++ b/package/kernel/mac80211/patches/812-b43-add-antenna-control.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/broadcom/b43/main.c +++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -1648,7 +1648,7 @@ static void b43_write_beacon_template(st +@@ -1658,7 +1658,7 @@ static void b43_write_beacon_template(st len, ram_offset, shm_size_offset, rate); /* Write the PHY TX control parameters. */ @@ -9,7 +9,7 @@ antenna = b43_antenna_to_phyctl(antenna); ctl = b43_shm_read16(dev, B43_SHM_SHARED, B43_SHM_SH_BEACPHYCTL); /* We can't send beacons with short preamble. Would get PHY errors. */ -@@ -3297,8 +3297,8 @@ static int b43_chip_init(struct b43_wlde +@@ -3307,8 +3307,8 @@ static int b43_chip_init(struct b43_wlde /* Select the antennae */ if (phy->ops->set_rx_antenna) @@ -20,7 +20,7 @@ if (phy->type == B43_PHYTYPE_B) { value16 = b43_read16(dev, 0x005E); -@@ -3998,7 +3998,6 @@ static int b43_op_config(struct ieee8021 +@@ -4008,7 +4008,6 @@ static int b43_op_config(struct ieee8021 struct b43_wldev *dev = wl->current_dev; struct b43_phy *phy = &dev->phy; struct ieee80211_conf *conf = &hw->conf; @@ -28,7 +28,7 @@ int err = 0; mutex_lock(&wl->mutex); -@@ -4041,11 +4040,9 @@ static int b43_op_config(struct ieee8021 +@@ -4051,11 +4050,9 @@ static int b43_op_config(struct ieee8021 } /* Antennas for RX and management frame TX. */ @@ -42,7 +42,7 @@ if (wl->radio_enabled != phy->radio_on) { if (wl->radio_enabled) { -@@ -5189,6 +5186,47 @@ static int b43_op_get_survey(struct ieee +@@ -5199,6 +5196,47 @@ static int b43_op_get_survey(struct ieee return 0; } @@ -90,7 +90,7 @@ static const struct ieee80211_ops b43_hw_ops = { .tx = b43_op_tx, .conf_tx = b43_op_conf_tx, -@@ -5210,6 +5248,8 @@ static const struct ieee80211_ops b43_hw +@@ -5220,6 +5258,8 @@ static const struct ieee80211_ops b43_hw .sw_scan_complete = b43_op_sw_scan_complete_notifier, .get_survey = b43_op_get_survey, .rfkill_poll = b43_rfkill_poll, @@ -99,7 +99,7 @@ }; /* Hard-reset the chip. Do not call this directly. -@@ -5513,6 +5553,8 @@ static int b43_one_core_attach(struct b4 +@@ -5523,6 +5563,8 @@ static int b43_one_core_attach(struct b4 if (!wldev) goto out; @@ -108,9 +108,9 @@ wldev->use_pio = b43_modparam_pio; wldev->dev = dev; wldev->wl = wl; -@@ -5605,6 +5647,9 @@ static struct b43_wl *b43_wireless_init( +@@ -5617,6 +5659,9 @@ static struct b43_wl *b43_wireless_init( - hw->wiphy->flags |= WIPHY_FLAG_IBSS_RSN; + wiphy_ext_feature_set(hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); + hw->wiphy->available_antennas_rx = 0x3; + hw->wiphy->available_antennas_tx = 0x3; diff --git a/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch b/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch index 8d0c0412d2..03f4524c88 100644 --- a/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch +++ b/package/kernel/mac80211/patches/814-b43-only-use-gpio-0-1-for-led.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/broadcom/b43/main.c +++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -2899,6 +2899,14 @@ static int b43_gpio_init(struct b43_wlde +@@ -2909,6 +2909,14 @@ static int b43_gpio_init(struct b43_wlde } else if (dev->dev->chip_id == 0x5354) { /* Don't allow overtaking buttons GPIOs */ set &= 0x2; /* 0x2 is LED GPIO on BCM5354 */ diff --git a/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch b/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch index ef7f3c92d2..f07151aa4e 100644 --- a/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch +++ b/package/kernel/mac80211/patches/815-b43-always-take-overlapping-devs.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/broadcom/b43/main.c +++ b/drivers/net/wireless/broadcom/b43/main.c -@@ -117,7 +117,7 @@ static int b43_modparam_pio = 0; +@@ -127,7 +127,7 @@ static int b43_modparam_pio = 0; module_param_named(pio, b43_modparam_pio, int, 0644); MODULE_PARM_DESC(pio, "Use PIO accesses by default: 0=DMA, 1=PIO"); diff --git a/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch b/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch index 91831188ac..cc29402c0b 100644 --- a/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch +++ b/package/kernel/mac80211/patches/860-brcmfmac-register-wiphy-s-during-module_init.patch @@ -13,7 +13,7 @@ Signed-off-by: Rafał Miłecki --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/core.c -@@ -1180,6 +1180,7 @@ int __init brcmf_core_init(void) +@@ -1198,6 +1198,7 @@ int __init brcmf_core_init(void) { if (!schedule_work(&brcmf_driver_work)) return -EBUSY; @@ -25,7 +25,7 @@ Signed-off-by: Rafał Miłecki +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/firmware.c @@ -444,6 +444,7 @@ struct brcmf_fw { u16 bus_nr; - void (*done)(struct device *dev, const struct firmware *fw, + void (*done)(struct device *dev, int err, const struct firmware *fw, void *nvram_image, u32 nvram_len); + struct completion *completion; }; @@ -34,7 +34,7 @@ Signed-off-by: Rafał Miłecki @@ -478,6 +479,8 @@ static void brcmf_fw_request_nvram_done( goto fail; - fwctx->done(fwctx->dev, fwctx->code, nvram, nvram_length); + fwctx->done(fwctx->dev, 0, fwctx->code, nvram, nvram_length); + if (fwctx->completion) + complete(fwctx->completion); kfree(fwctx); @@ -43,31 +43,22 @@ Signed-off-by: Rafał Miłecki @@ -485,6 +488,8 @@ fail: brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev)); release_firmware(fwctx->code); - device_release_driver(fwctx->dev); + fwctx->done(fwctx->dev, -ENOENT, NULL, NULL, 0); + if (fwctx->completion) + complete(fwctx->completion); kfree(fwctx); } -@@ -500,6 +505,8 @@ static void brcmf_fw_request_code_done(c - /* only requested code so done here */ - if (!(fwctx->flags & BRCMF_FW_REQUEST_NVRAM)) { - fwctx->done(fwctx->dev, fw, NULL, 0); -+ if (fwctx->completion) -+ complete(fwctx->completion); - kfree(fwctx); - return; - } -@@ -517,6 +524,8 @@ static void brcmf_fw_request_code_done(c - fail: +@@ -516,6 +521,8 @@ fail: brcmf_dbg(TRACE, "failed: dev=%s\n", dev_name(fwctx->dev)); - device_release_driver(fwctx->dev); + done: + fwctx->done(fwctx->dev, ret, fw, NULL, 0); + if (fwctx->completion) + complete(fwctx->completion); kfree(fwctx); } -@@ -528,6 +537,8 @@ int brcmf_fw_get_firmwares_pcie(struct d +@@ -527,6 +534,8 @@ int brcmf_fw_get_firmwares_pcie(struct d u16 domain_nr, u16 bus_nr) { struct brcmf_fw *fwctx; @@ -76,7 +67,7 @@ Signed-off-by: Rafał Miłecki brcmf_dbg(TRACE, "enter: dev=%s\n", dev_name(dev)); if (!fw_cb || !code) -@@ -548,9 +559,17 @@ int brcmf_fw_get_firmwares_pcie(struct d +@@ -547,9 +556,17 @@ int brcmf_fw_get_firmwares_pcie(struct d fwctx->domain_nr = domain_nr; fwctx->bus_nr = bus_nr; diff --git a/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch b/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch index 774b333402..7fc1e449d0 100644 --- a/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch +++ b/package/kernel/mac80211/patches/861-brcmfmac-workaround-bug-with-some-inconsistent-BSSes.patch @@ -10,8 +10,8 @@ Signed-off-by: Rafał Miłecki --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -656,9 +656,37 @@ static struct wireless_dev *brcmf_cfg802 - u32 *flags, +@@ -655,9 +655,37 @@ static struct wireless_dev *brcmf_cfg802 + enum nl80211_iftype type, struct vif_params *params) { + struct net_device *dev; diff --git a/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch b/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch index 1819cf3999..7c1841b770 100644 --- a/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch +++ b/package/kernel/mac80211/patches/862-brcmfmac-Disable-power-management.patch @@ -14,7 +14,7 @@ Signed-off-by: Phil Elwell --- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c +++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/cfg80211.c -@@ -2775,6 +2775,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip +@@ -2849,6 +2849,10 @@ brcmf_cfg80211_set_power_mgmt(struct wip * preference in cfg struct to apply this to * FW later while initializing the dongle */ diff --git a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch index b966516e57..94a25b680d 100644 --- a/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch +++ b/package/kernel/mac80211/patches/921-ath10k_init_devices_synchronously.patch @@ -14,7 +14,7 @@ Signed-off-by: Sven Eckelmann --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c -@@ -2329,6 +2329,16 @@ int ath10k_core_register(struct ath10k * +@@ -2445,6 +2445,16 @@ int ath10k_core_register(struct ath10k * ar->chip_id = chip_id; queue_work(ar->workqueue, &ar->register_work); diff --git a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch index 6137a50bcf..e0ab671760 100644 --- a/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch +++ b/package/kernel/mac80211/patches/930-ath10k_add_tpt_led_trigger.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath10k/mac.c +++ b/drivers/net/wireless/ath/ath10k/mac.c -@@ -8007,6 +8007,21 @@ static int ath10k_mac_init_rd(struct ath +@@ -8067,6 +8067,21 @@ static int ath10k_mac_init_rd(struct ath return 0; } @@ -22,9 +22,9 @@ int ath10k_mac_register(struct ath10k *ar) { static const u32 cipher_suites[] = { -@@ -8244,6 +8259,12 @@ int ath10k_mac_register(struct ath10k *a - ar->hw->wiphy->cipher_suites = cipher_suites; - ar->hw->wiphy->n_cipher_suites = ARRAY_SIZE(cipher_suites); +@@ -8308,6 +8323,12 @@ int ath10k_mac_register(struct ath10k *a + + wiphy_ext_feature_set(ar->hw->wiphy, NL80211_EXT_FEATURE_CQM_RSSI_LIST); +#ifdef CPTCFG_MAC80211_LEDS + ieee80211_create_tpt_led_trigger(ar->hw, diff --git a/package/kernel/mac80211/patches/936-ath10k-fix-otp-failure-result.patch b/package/kernel/mac80211/patches/936-ath10k-fix-otp-failure-result.patch index d302a7d2a3..0af8025d96 100644 --- a/package/kernel/mac80211/patches/936-ath10k-fix-otp-failure-result.patch +++ b/package/kernel/mac80211/patches/936-ath10k-fix-otp-failure-result.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath10k/core.c +++ b/drivers/net/wireless/ath/ath10k/core.c -@@ -691,7 +691,7 @@ static int ath10k_core_get_board_id_from +@@ -757,7 +757,7 @@ static int ath10k_core_get_board_id_from if (ret) { ath10k_err(ar, "could not execute otp for board id check: %d\n", ret); diff --git a/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch index 357faee4bf..a958c78b43 100644 --- a/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch +++ b/package/kernel/mac80211/patches/940-mwl8k_init_devices_synchronously.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/marvell/mwl8k.c +++ b/drivers/net/wireless/marvell/mwl8k.c -@@ -6264,6 +6264,8 @@ static int mwl8k_probe(struct pci_dev *p +@@ -6266,6 +6266,8 @@ static int mwl8k_probe(struct pci_dev *p priv->running_bsses = 0; @@ -9,7 +9,7 @@ return rc; err_stop_firmware: -@@ -6297,8 +6299,6 @@ static void mwl8k_remove(struct pci_dev +@@ -6299,8 +6301,6 @@ static void mwl8k_remove(struct pci_dev return; priv = hw->priv; diff --git a/package/kernel/mac80211/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch b/package/kernel/mac80211/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch index d49be4df70..914472aab9 100644 --- a/package/kernel/mac80211/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch +++ b/package/kernel/mac80211/patches/960-0010-ath10k-limit-htt-rx-ring-size.patch @@ -1,6 +1,6 @@ --- a/drivers/net/wireless/ath/ath10k/htt.h +++ b/drivers/net/wireless/ath/ath10k/htt.h -@@ -199,7 +199,7 @@ enum htt_rx_ring_flags { +@@ -200,7 +200,7 @@ enum htt_rx_ring_flags { }; #define HTT_RX_RING_SIZE_MIN 128 diff --git a/package/kernel/mt76/patches/001-mac80211-4-14-api.patch b/package/kernel/mt76/patches/001-mac80211-4-14-api.patch new file mode 100644 index 0000000000..6cff15b196 --- /dev/null +++ b/package/kernel/mt76/patches/001-mac80211-4-14-api.patch @@ -0,0 +1,86 @@ +--- a/mt76x2_mac.c ++++ b/mt76x2_mac.c +@@ -46,7 +46,7 @@ mt76x2_mac_process_rate(struct ieee80211 + case MT_PHY_TYPE_CCK: + if (idx >= 8) { + idx -= 8; +- status->flag |= RX_FLAG_SHORTPRE; ++ status->enc_flags |= RX_ENC_FLAG_SHORTPRE; + } + + if (idx >= 4) +@@ -55,16 +55,16 @@ mt76x2_mac_process_rate(struct ieee80211 + status->rate_idx = idx; + return; + case MT_PHY_TYPE_HT_GF: +- status->flag |= RX_FLAG_HT_GF; ++ status->enc_flags |= RX_ENC_FLAG_HT_GF; + /* fall through */ + case MT_PHY_TYPE_HT: +- status->flag |= RX_FLAG_HT; ++ status->encoding = RX_ENC_HT; + status->rate_idx = idx; + break; + case MT_PHY_TYPE_VHT: +- status->flag |= RX_FLAG_VHT; ++ status->encoding = RX_ENC_VHT; + status->rate_idx = FIELD_GET(MT_RATE_INDEX_VHT_IDX, idx); +- status->vht_nss = FIELD_GET(MT_RATE_INDEX_VHT_NSS, idx) + 1; ++ status->nss = FIELD_GET(MT_RATE_INDEX_VHT_NSS, idx) + 1; + break; + default: + WARN_ON(1); +@@ -72,22 +72,22 @@ mt76x2_mac_process_rate(struct ieee80211 + } + + if (rate & MT_RXWI_RATE_LDPC) +- status->flag |= RX_FLAG_LDPC; ++ status->enc_flags |= RX_ENC_FLAG_LDPC; + + if (rate & MT_RXWI_RATE_SGI) +- status->flag |= RX_FLAG_SHORT_GI; ++ status->enc_flags |= RX_ENC_FLAG_SHORT_GI; + + if (rate & MT_RXWI_RATE_STBC) +- status->flag |= 1 << RX_FLAG_STBC_SHIFT; ++ status->enc_flags |= 1 << RX_ENC_FLAG_STBC_SHIFT; + + switch (FIELD_GET(MT_RXWI_RATE_BW, rate)) { + case MT_PHY_BW_20: + break; + case MT_PHY_BW_40: +- status->flag |= RX_FLAG_40MHZ; ++ status->bw = RATE_INFO_BW_40; + break; + case MT_PHY_BW_80: +- status->vht_flag |= RX_VHT_FLAG_80MHZ; ++ status->bw = RATE_INFO_BW_80; + break; + default: + break; +--- a/mt7603_mac.c ++++ b/mt7603_mac.c +@@ -411,19 +411,19 @@ mt7603_mac_fill_rx(struct mt7603_dev *de + break; + case MT_PHY_TYPE_HT_GF: + case MT_PHY_TYPE_HT: +- status->flag |= RX_FLAG_HT; ++ status->encoding = RX_ENC_HT; + break; + case MT_PHY_TYPE_VHT: +- status->flag |= RX_FLAG_VHT; ++ status->encoding = RX_ENC_VHT; + break; + default: + WARN_ON(1); + } + + if (rxdg0 & MT_RXV1_HT_SHORT_GI) +- status->flag |= RX_FLAG_SHORT_GI; ++ status->enc_flags |= RX_ENC_FLAG_SHORT_GI; + +- status->flag |= RX_FLAG_STBC_MASK * ++ status->enc_flags |= RX_ENC_FLAG_STBC_MASK * + FIELD_GET(MT_RXV1_HT_STBC, rxdg0); + + status->rate_idx = i; diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index 88e47cce82..25ec1263ad 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,6 +1,81 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -323,7 +323,7 @@ +@@ -10,7 +10,7 @@ + * Copyright 2008, 2009 Luis R. Rodriguez + * Copyright 2008 Jouni Malinen + * Copyright 2008 Colin McCabe +- * Copyright 2015 Intel Deutschland GmbH ++ * Copyright 2015-2017 Intel Deutschland GmbH + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above +@@ -173,6 +173,65 @@ + */ + + /** ++ * DOC: WPA/WPA2 EAPOL handshake offload ++ * ++ * By setting @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK flag drivers ++ * can indicate they support offloading EAPOL handshakes for WPA/WPA2 ++ * preshared key authentication. In %NL80211_CMD_CONNECT the preshared ++ * key should be specified using %NL80211_ATTR_PMK. Drivers supporting ++ * this offload may reject the %NL80211_CMD_CONNECT when no preshared ++ * key material is provided, for example when that driver does not ++ * support setting the temporal keys through %CMD_NEW_KEY. ++ * ++ * Similarly @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X flag can be ++ * set by drivers indicating offload support of the PTK/GTK EAPOL ++ * handshakes during 802.1X authentication. In order to use the offload ++ * the %NL80211_CMD_CONNECT should have %NL80211_ATTR_WANT_1X_4WAY_HS ++ * attribute flag. Drivers supporting this offload may reject the ++ * %NL80211_CMD_CONNECT when the attribute flag is not present. ++ * ++ * For 802.1X the PMK or PMK-R0 are set by providing %NL80211_ATTR_PMK ++ * using %NL80211_CMD_SET_PMK. For offloaded FT support also ++ * %NL80211_ATTR_PMKR0_NAME must be provided. ++ */ ++ ++/** ++ * DOC: FILS shared key authentication offload ++ * ++ * FILS shared key authentication offload can be advertized by drivers by ++ * setting @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD flag. The drivers that support ++ * FILS shared key authentication offload should be able to construct the ++ * authentication and association frames for FILS shared key authentication and ++ * eventually do a key derivation as per IEEE 802.11ai. The below additional ++ * parameters should be given to driver in %NL80211_CMD_CONNECT. ++ * %NL80211_ATTR_FILS_ERP_USERNAME - used to construct keyname_nai ++ * %NL80211_ATTR_FILS_ERP_REALM - used to construct keyname_nai ++ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used to construct erp message ++ * %NL80211_ATTR_FILS_ERP_RRK - used to generate the rIK and rMSK ++ * rIK should be used to generate an authentication tag on the ERP message and ++ * rMSK should be used to derive a PMKSA. ++ * rIK, rMSK should be generated and keyname_nai, sequence number should be used ++ * as specified in IETF RFC 6696. ++ * ++ * When FILS shared key authentication is completed, driver needs to provide the ++ * below additional parameters to userspace. ++ * %NL80211_ATTR_FILS_KEK - used for key renewal ++ * %NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM - used in further EAP-RP exchanges ++ * %NL80211_ATTR_PMKID - used to identify the PMKSA used/generated ++ * %Nl80211_ATTR_PMK - used to update PMKSA cache in userspace ++ * The PMKSA can be maintained in userspace persistently so that it can be used ++ * later after reboots or wifi turn off/on also. ++ * ++ * %NL80211_ATTR_FILS_CACHE_ID is the cache identifier advertized by a FILS ++ * capable AP supporting PMK caching. It specifies the scope within which the ++ * PMKSAs are cached in an ESS. %NL80211_CMD_SET_PMKSA and ++ * %NL80211_CMD_DEL_PMKSA are enhanced to allow support for PMKSA caching based ++ * on FILS cache identifier. Additionally %NL80211_ATTR_PMK is used with ++ * %NL80211_SET_PMKSA to specify the PMK corresponding to a PMKSA for driver to ++ * use in a FILS shared key connection with PMKSA caching. ++ */ ++ ++/** + * enum nl80211_commands - supported nl80211 commands + * + * @NL80211_CMD_UNSPEC: unspecified command to catch errors +@@ -323,7 +382,7 @@ * @NL80211_CMD_GET_SCAN: get scan results * @NL80211_CMD_TRIGGER_SCAN: trigger a new scan with the given parameters * %NL80211_ATTR_TX_NO_CCK_RATE is used to decide whether to send the @@ -9,7 +84,56 @@ * specify a BSSID to scan for; if not included, the wildcard BSSID will * be used. * @NL80211_CMD_NEW_SCAN_RESULTS: scan notification (as a reply to -@@ -600,6 +600,20 @@ +@@ -351,7 +410,9 @@ + * are used. Extra IEs can also be passed from the userspace by + * using the %NL80211_ATTR_IE attribute. The first cycle of the + * scheduled scan can be delayed by %NL80211_ATTR_SCHED_SCAN_DELAY +- * is supplied. ++ * is supplied. If the device supports multiple concurrent scheduled ++ * scans, it will allow such when the caller provides the flag attribute ++ * %NL80211_ATTR_SCHED_SCAN_MULTI to indicate user-space support for it. + * @NL80211_CMD_STOP_SCHED_SCAN: stop a scheduled scan. Returns -ENOENT if + * scheduled scan is not running. The caller may assume that as soon + * as the call returns, it is safe to start a new scheduled scan again. +@@ -370,10 +431,18 @@ + * @NL80211_CMD_NEW_SURVEY_RESULTS: survey data notification (as a reply to + * NL80211_CMD_GET_SURVEY and on the "scan" multicast group) + * +- * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry, using %NL80211_ATTR_MAC +- * (for the BSSID) and %NL80211_ATTR_PMKID. ++ * @NL80211_CMD_SET_PMKSA: Add a PMKSA cache entry using %NL80211_ATTR_MAC ++ * (for the BSSID), %NL80211_ATTR_PMKID, and optionally %NL80211_ATTR_PMK ++ * (PMK is used for PTKSA derivation in case of FILS shared key offload) or ++ * using %NL80211_ATTR_SSID, %NL80211_ATTR_FILS_CACHE_ID, ++ * %NL80211_ATTR_PMKID, and %NL80211_ATTR_PMK in case of FILS ++ * authentication where %NL80211_ATTR_FILS_CACHE_ID is the identifier ++ * advertized by a FILS capable AP identifying the scope of PMKSA in an ++ * ESS. + * @NL80211_CMD_DEL_PMKSA: Delete a PMKSA cache entry, using %NL80211_ATTR_MAC +- * (for the BSSID) and %NL80211_ATTR_PMKID. ++ * (for the BSSID) and %NL80211_ATTR_PMKID or using %NL80211_ATTR_SSID, ++ * %NL80211_ATTR_FILS_CACHE_ID, and %NL80211_ATTR_PMKID in case of FILS ++ * authentication. + * @NL80211_CMD_FLUSH_PMKSA: Flush all PMKSA cache entries. + * + * @NL80211_CMD_REG_CHANGE: indicates to userspace the regulatory domain +@@ -500,8 +569,13 @@ + * authentication/association or not receiving a response from the AP. + * Non-zero %NL80211_ATTR_STATUS_CODE value is indicated in that case as + * well to remain backwards compatible. +- * @NL80211_CMD_ROAM: request that the card roam (currently not implemented), +- * sent as an event when the card/driver roamed by itself. ++ * @NL80211_CMD_ROAM: notifcation indicating the card/driver roamed by itself. ++ * When the driver roamed in a network that requires 802.1X authentication, ++ * %NL80211_ATTR_PORT_AUTHORIZED should be set if the 802.1X authentication ++ * was done by the driver or if roaming was done using Fast Transition ++ * protocol (in which case 802.1X authentication is not needed). If ++ * %NL80211_ATTR_PORT_AUTHORIZED is not set, user space is responsible for ++ * the 802.1X authentication. + * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify + * userspace that a connection was dropped by the AP or due to other + * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and +@@ -600,6 +674,20 @@ * * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. * @@ -30,7 +154,45 @@ * @NL80211_CMD_JOIN_MESH: Join a mesh. The mesh ID must be given, and initial * mesh config parameters may be given. * @NL80211_CMD_LEAVE_MESH: Leave the mesh network -- no special arguments, the -@@ -874,6 +888,12 @@ +@@ -840,12 +928,15 @@ + * cfg80211_scan_done(). + * + * @NL80211_CMD_START_NAN: Start NAN operation, identified by its +- * %NL80211_ATTR_WDEV interface. This interface must have been previously +- * created with %NL80211_CMD_NEW_INTERFACE. After it has been started, the +- * NAN interface will create or join a cluster. This command must have a +- * valid %NL80211_ATTR_NAN_MASTER_PREF attribute and optional +- * %NL80211_ATTR_NAN_DUAL attributes. +- * After this command NAN functions can be added. ++ * %NL80211_ATTR_WDEV interface. This interface must have been ++ * previously created with %NL80211_CMD_NEW_INTERFACE. After it ++ * has been started, the NAN interface will create or join a ++ * cluster. This command must have a valid ++ * %NL80211_ATTR_NAN_MASTER_PREF attribute and optional ++ * %NL80211_ATTR_BANDS attributes. If %NL80211_ATTR_BANDS is ++ * omitted or set to 0, it means don't-care and the device will ++ * decide what to use. After this command NAN functions can be ++ * added. + * @NL80211_CMD_STOP_NAN: Stop the NAN operation, identified by + * its %NL80211_ATTR_WDEV interface. + * @NL80211_CMD_ADD_NAN_FUNCTION: Add a NAN function. The function is defined +@@ -866,14 +957,32 @@ + * This command is also used as a notification sent when a NAN function is + * terminated. This will contain a %NL80211_ATTR_NAN_FUNC_INST_ID + * and %NL80211_ATTR_COOKIE attributes. +- * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN configuration. NAN +- * must be operational (%NL80211_CMD_START_NAN was executed). +- * It must contain at least one of the following attributes: +- * %NL80211_ATTR_NAN_MASTER_PREF, %NL80211_ATTR_NAN_DUAL. ++ * @NL80211_CMD_CHANGE_NAN_CONFIG: Change current NAN ++ * configuration. NAN must be operational (%NL80211_CMD_START_NAN ++ * was executed). It must contain at least one of the following ++ * attributes: %NL80211_ATTR_NAN_MASTER_PREF, ++ * %NL80211_ATTR_BANDS. If %NL80211_ATTR_BANDS is omitted, the ++ * current configuration is not changed. If it is present but ++ * set to zero, the configuration is changed to don't-care ++ * (i.e. the device can decide what to do). + * @NL80211_CMD_NAN_FUNC_MATCH: Notification sent when a match is reported. * This will contain a %NL80211_ATTR_NAN_MATCH nested attribute and * %NL80211_ATTR_COOKIE. * @@ -39,22 +201,33 @@ + * BSS selection. This command can be issued only while connected and it + * does not result in a change for the current association. Currently, + * only the %NL80211_ATTR_IE data is used and updated with this command. ++ * ++ * @NL80211_CMD_SET_PMK: For offloaded 4-Way handshake, set the PMK or PMK-R0 ++ * for the given authenticator address (specified with &NL80211_ATTR_MAC). ++ * When &NL80211_ATTR_PMKR0_NAME is set, &NL80211_ATTR_PMK specifies the ++ * PMK-R0, otherwise it specifies the PMK. ++ * @NL80211_CMD_DEL_PMK: For offloaded 4-Way handshake, delete the previously ++ * configured PMK for the authenticator address identified by ++ * &NL80211_ATTR_MAC. + * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ -@@ -1069,6 +1089,10 @@ enum nl80211_commands { +@@ -1069,6 +1178,13 @@ enum nl80211_commands { NL80211_CMD_CHANGE_NAN_CONFIG, NL80211_CMD_NAN_MATCH, + NL80211_CMD_SET_MULTICAST_TO_UNICAST, + + NL80211_CMD_UPDATE_CONNECT_PARAMS, ++ ++ NL80211_CMD_SET_PMK, ++ NL80211_CMD_DEL_PMK, + /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -@@ -1638,8 +1662,16 @@ enum nl80211_commands { +@@ -1638,8 +1754,16 @@ enum nl80211_commands { * the connection request from a station. nl80211_connect_failed_reason * enum has different reasons of connection failure. * @@ -73,7 +246,7 @@ * * @NL80211_ATTR_VHT_CAPABILITY: VHT Capability information element (from * association request when used with NL80211_CMD_NEW_STATION) -@@ -1740,7 +1772,9 @@ enum nl80211_commands { +@@ -1740,7 +1864,9 @@ enum nl80211_commands { * * @NL80211_ATTR_OPMODE_NOTIF: Operating mode field from Operating Mode * Notification Element based on association request when used with @@ -84,16 +257,41 @@ * * @NL80211_ATTR_VENDOR_ID: The vendor ID, either a 24-bit OUI or, if * %NL80211_VENDOR_ID_IS_LINUX is set, a special Linux ID (not used yet) -@@ -1788,6 +1822,8 @@ enum nl80211_commands { - * and remove functions. NAN notifications will be sent in unicast to that - * socket. Without this attribute, any socket can add functions and the - * notifications will be sent to the %NL80211_MCGRP_NAN multicast group. +@@ -1783,11 +1909,12 @@ enum nl80211_commands { + * that configured the indoor setting, and the indoor operation would be + * cleared when the socket is closed. + * If set during NAN interface creation, the interface will be destroyed +- * if the socket is closed just like any other interface. Moreover, only +- * the netlink socket that created the interface will be allowed to add +- * and remove functions. NAN notifications will be sent in unicast to that +- * socket. Without this attribute, any socket can add functions and the +- * notifications will be sent to the %NL80211_MCGRP_NAN multicast group. ++ * if the socket is closed just like any other interface. Moreover, NAN ++ * notifications will be sent in unicast to that socket. Without this ++ * attribute, the notifications will be sent to the %NL80211_MCGRP_NAN ++ * multicast group. + * If set during %NL80211_CMD_ASSOCIATE or %NL80211_CMD_CONNECT the + * station will deauthenticate when the socket is closed. * * @NL80211_ATTR_TDLS_INITIATOR: flag attribute indicating the current end is * the TDLS link initiator. -@@ -1936,6 +1972,38 @@ enum nl80211_commands { +@@ -1927,15 +2054,93 @@ enum nl80211_commands { + * %NL80211_CMD_CHANGE_NAN_CONFIG. Its type is u8 and it can't be 0. + * Also, values 1 and 255 are reserved for certification purposes and + * should not be used during a normal device operation. +- * @NL80211_ATTR_NAN_DUAL: NAN dual band operation config (see +- * &enum nl80211_nan_dual_band_conf). This attribute is used with +- * %NL80211_CMD_START_NAN and optionally with +- * %NL80211_CMD_CHANGE_NAN_CONFIG. ++ * @NL80211_ATTR_BANDS: operating bands configuration. This is a u32 ++ * bitmask of BIT(NL80211_BAND_*) as described in %enum ++ * nl80211_band. For instance, for NL80211_BAND_2GHZ, bit 0 ++ * would be set. This attribute is used with ++ * %NL80211_CMD_START_NAN and %NL80211_CMD_CHANGE_NAN_CONFIG, and ++ * it is optional. If no bands are set, it means don't-care and ++ * the device will decide what to use. + * @NL80211_ATTR_NAN_FUNC: a function that can be added to NAN. See + * &enum nl80211_nan_func_attributes for description of this nested * attribute. * @NL80211_ATTR_NAN_MATCH: used to report a match. This is a nested attribute. * See &enum nl80211_nan_match_attributes. @@ -127,12 +325,55 @@ + * u32 attribute with an &enum nl80211_timeout_reason value. This is used, + * e.g., with %NL80211_CMD_CONNECT event. + * ++ * @NL80211_ATTR_FILS_ERP_USERNAME: EAP Re-authentication Protocol (ERP) ++ * username part of NAI used to refer keys rRK and rIK. This is used with ++ * %NL80211_CMD_CONNECT. ++ * ++ * @NL80211_ATTR_FILS_ERP_REALM: EAP Re-authentication Protocol (ERP) realm part ++ * of NAI specifying the domain name of the ER server. This is used with ++ * %NL80211_CMD_CONNECT. ++ * ++ * @NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM: Unsigned 16-bit ERP next sequence number ++ * to use in ERP messages. This is used in generating the FILS wrapped data ++ * for FILS authentication and is used with %NL80211_CMD_CONNECT. ++ * ++ * @NL80211_ATTR_FILS_ERP_RRK: ERP re-authentication Root Key (rRK) for the ++ * NAI specified by %NL80211_ATTR_FILS_ERP_USERNAME and ++ * %NL80211_ATTR_FILS_ERP_REALM. This is used for generating rIK and rMSK ++ * from successful FILS authentication and is used with ++ * %NL80211_CMD_CONNECT. ++ * ++ * @NL80211_ATTR_FILS_CACHE_ID: A 2-octet identifier advertized by a FILS AP ++ * identifying the scope of PMKSAs. This is used with ++ * @NL80211_CMD_SET_PMKSA and @NL80211_CMD_DEL_PMKSA. ++ * ++ * @NL80211_ATTR_PMK: attribute for passing PMK key material. Used with ++ * %NL80211_CMD_SET_PMKSA for the PMKSA identified by %NL80211_ATTR_PMKID. ++ * For %NL80211_CMD_CONNECT it is used to provide PSK for offloading 4-way ++ * handshake for WPA/WPA2-PSK networks. For 802.1X authentication it is ++ * used with %NL80211_CMD_SET_PMK. For offloaded FT support this attribute ++ * specifies the PMK-R0 if NL80211_ATTR_PMKR0_NAME is included as well. ++ * ++ * @NL80211_ATTR_SCHED_SCAN_MULTI: flag attribute which user-space shall use to ++ * indicate that it supports multiple active scheduled scan requests. ++ * @NL80211_ATTR_SCHED_SCAN_MAX_REQS: indicates maximum number of scheduled ++ * scan request that may be active for the device (u32). ++ * ++ * @NL80211_ATTR_WANT_1X_4WAY_HS: flag attribute which user-space can include ++ * in %NL80211_CMD_CONNECT to indicate that for 802.1X authentication it ++ * wants to use the supported offload of the 4-way handshake. ++ * @NL80211_ATTR_PMKR0_NAME: PMK-R0 Name for offloaded FT. ++ * @NL80211_ATTR_PORT_AUTHORIZED: flag attribute used in %NL80211_CMD_ROAMED ++ * notification indicating that that 802.1X authentication was done by ++ * the driver or is not needed (because roaming used the Fast Transition ++ * protocol). ++ * + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined -@@ -2195,7 +2263,7 @@ enum nl80211_attrs { +@@ -2195,7 +2400,7 @@ enum nl80211_attrs { NL80211_ATTR_CONN_FAILED_REASON, @@ -141,7 +382,12 @@ NL80211_ATTR_VHT_CAPABILITY, -@@ -2336,6 +2404,20 @@ enum nl80211_attrs { +@@ -2332,10 +2537,39 @@ enum nl80211_attrs { + NL80211_ATTR_MESH_PEER_AID, + + NL80211_ATTR_NAN_MASTER_PREF, +- NL80211_ATTR_NAN_DUAL, ++ NL80211_ATTR_BANDS, NL80211_ATTR_NAN_FUNC, NL80211_ATTR_NAN_MATCH, @@ -157,12 +403,27 @@ + + NL80211_ATTR_TIMEOUT_REASON, + ++ NL80211_ATTR_FILS_ERP_USERNAME, ++ NL80211_ATTR_FILS_ERP_REALM, ++ NL80211_ATTR_FILS_ERP_NEXT_SEQ_NUM, ++ NL80211_ATTR_FILS_ERP_RRK, ++ NL80211_ATTR_FILS_CACHE_ID, ++ ++ NL80211_ATTR_PMK, ++ ++ NL80211_ATTR_SCHED_SCAN_MULTI, ++ NL80211_ATTR_SCHED_SCAN_MAX_REQS, ++ ++ NL80211_ATTR_WANT_1X_4WAY_HS, ++ NL80211_ATTR_PMKR0_NAME, ++ NL80211_ATTR_PORT_AUTHORIZED, ++ + NL80211_ATTR_WIPHY_ANTENNA_GAIN, + /* add attributes here, update the policy in nl80211.c */ __NL80211_ATTR_AFTER_LAST, -@@ -2347,6 +2429,7 @@ enum nl80211_attrs { +@@ -2347,6 +2581,7 @@ enum nl80211_attrs { #define NL80211_ATTR_SCAN_GENERATION NL80211_ATTR_GENERATION #define NL80211_ATTR_MESH_PARAMS NL80211_ATTR_MESH_CONFIG #define NL80211_ATTR_IFACE_SOCKET_OWNER NL80211_ATTR_SOCKET_OWNER @@ -170,7 +431,15 @@ /* * Allow user space programs to use #ifdef on new attributes by defining them -@@ -3027,6 +3110,13 @@ enum nl80211_reg_rule_attr { +@@ -3019,6 +3254,7 @@ enum nl80211_reg_rule_attr { + * @__NL80211_SCHED_SCAN_MATCH_ATTR_INVALID: attribute number 0 is reserved + * @NL80211_SCHED_SCAN_MATCH_ATTR_SSID: SSID to be used for matching, + * only report BSS with matching SSID. ++ * (This cannot be used together with BSSID.) + * @NL80211_SCHED_SCAN_MATCH_ATTR_RSSI: RSSI threshold (in dBm) for reporting a + * BSS in scan results. Filtering is turned off if not specified. Note that + * if this attribute is in a match set of its own, then it is treated as +@@ -3027,6 +3263,15 @@ enum nl80211_reg_rule_attr { * how this API was implemented in the past. Also, due to the same problem, * the only way to create a matchset with only an RSSI filter (with this * attribute) is if there's only a single matchset with the RSSI attribute. @@ -181,19 +450,22 @@ + * BSS-es in the specified band is to be adjusted before doing + * RSSI-based BSS selection. The attribute value is a packed structure + * value as specified by &struct nl80211_bss_select_rssi_adjust. ++ * @NL80211_SCHED_SCAN_MATCH_ATTR_BSSID: BSSID to be used for matching ++ * (this cannot be used together with SSID). * @NL80211_SCHED_SCAN_MATCH_ATTR_MAX: highest scheduled scan filter * attribute number currently defined * @__NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST: internal use -@@ -3036,6 +3126,8 @@ enum nl80211_sched_scan_match_attr { +@@ -3036,6 +3281,9 @@ enum nl80211_sched_scan_match_attr { NL80211_SCHED_SCAN_MATCH_ATTR_SSID, NL80211_SCHED_SCAN_MATCH_ATTR_RSSI, + NL80211_SCHED_SCAN_MATCH_ATTR_RELATIVE_RSSI, + NL80211_SCHED_SCAN_MATCH_ATTR_RSSI_ADJUST, ++ NL80211_SCHED_SCAN_MATCH_ATTR_BSSID, /* keep last */ __NL80211_SCHED_SCAN_MATCH_ATTR_AFTER_LAST, -@@ -3660,6 +3752,9 @@ enum nl80211_bss_status { +@@ -3660,6 +3908,9 @@ enum nl80211_bss_status { * @NL80211_AUTHTYPE_FT: Fast BSS Transition (IEEE 802.11r) * @NL80211_AUTHTYPE_NETWORK_EAP: Network EAP (some Cisco APs and mainly LEAP) * @NL80211_AUTHTYPE_SAE: Simultaneous authentication of equals @@ -203,7 +475,7 @@ * @__NL80211_AUTHTYPE_NUM: internal * @NL80211_AUTHTYPE_MAX: maximum valid auth algorithm * @NL80211_AUTHTYPE_AUTOMATIC: determine automatically (if necessary by -@@ -3672,6 +3767,9 @@ enum nl80211_auth_type { +@@ -3672,6 +3923,9 @@ enum nl80211_auth_type { NL80211_AUTHTYPE_FT, NL80211_AUTHTYPE_NETWORK_EAP, NL80211_AUTHTYPE_SAE, @@ -213,7 +485,36 @@ /* keep last */ __NL80211_AUTHTYPE_NUM, -@@ -4280,6 +4378,9 @@ enum nl80211_iface_limit_attrs { +@@ -3839,7 +4093,10 @@ enum nl80211_ps_state { + * @__NL80211_ATTR_CQM_INVALID: invalid + * @NL80211_ATTR_CQM_RSSI_THOLD: RSSI threshold in dBm. This value specifies + * the threshold for the RSSI level at which an event will be sent. Zero +- * to disable. ++ * to disable. Alternatively, if %NL80211_EXT_FEATURE_CQM_RSSI_LIST is ++ * set, multiple values can be supplied as a low-to-high sorted array of ++ * threshold values in dBm. Events will be sent when the RSSI value ++ * crosses any of the thresholds. + * @NL80211_ATTR_CQM_RSSI_HYST: RSSI hysteresis in dBm. This value specifies + * the minimum amount the RSSI level must change after an event before a + * new event may be issued (to reduce effects of RSSI oscillation). +@@ -3859,6 +4116,8 @@ enum nl80211_ps_state { + * %NL80211_CMD_NOTIFY_CQM. Set to 0 to turn off TX error reporting. + * @NL80211_ATTR_CQM_BEACON_LOSS_EVENT: flag attribute that's set in a beacon + * loss event ++ * @NL80211_ATTR_CQM_RSSI_LEVEL: the RSSI value in dBm that triggered the ++ * RSSI threshold event. + * @__NL80211_ATTR_CQM_AFTER_LAST: internal + * @NL80211_ATTR_CQM_MAX: highest key attribute + */ +@@ -3872,6 +4131,7 @@ enum nl80211_attr_cqm { + NL80211_ATTR_CQM_TXE_PKTS, + NL80211_ATTR_CQM_TXE_INTVL, + NL80211_ATTR_CQM_BEACON_LOSS_EVENT, ++ NL80211_ATTR_CQM_RSSI_LEVEL, + + /* keep last */ + __NL80211_ATTR_CQM_AFTER_LAST, +@@ -4280,6 +4540,9 @@ enum nl80211_iface_limit_attrs { * of supported channel widths for radar detection. * @NL80211_IFACE_COMB_RADAR_DETECT_REGIONS: u32 attribute containing the bitmap * of supported regulatory regions for radar detection. @@ -223,7 +524,7 @@ * @NUM_NL80211_IFACE_COMB: number of attributes * @MAX_NL80211_IFACE_COMB: highest attribute number * -@@ -4287,8 +4388,8 @@ enum nl80211_iface_limit_attrs { +@@ -4287,8 +4550,8 @@ enum nl80211_iface_limit_attrs { * limits = [ #{STA} <= 1, #{AP} <= 1 ], matching BI, channels = 1, max = 2 * => allows an AP and a STA that must match BIs * @@ -234,7 +535,7 @@ * * numbers = [ #{STA} <= 2 ], channels = 2, max = 2 * => allows two STAs on different channels -@@ -4314,6 +4415,7 @@ enum nl80211_if_combination_attrs { +@@ -4314,6 +4577,7 @@ enum nl80211_if_combination_attrs { NL80211_IFACE_COMB_NUM_CHANNELS, NL80211_IFACE_COMB_RADAR_DETECT_WIDTHS, NL80211_IFACE_COMB_RADAR_DETECT_REGIONS, @@ -242,7 +543,7 @@ /* keep last */ NUM_NL80211_IFACE_COMB, -@@ -4634,6 +4736,15 @@ enum nl80211_feature_flags { +@@ -4634,6 +4898,27 @@ enum nl80211_feature_flags { * configuration (AP/mesh) with HT rates. * @NL80211_EXT_FEATURE_BEACON_RATE_VHT: Driver supports beacon rate * configuration (AP/mesh) with VHT rates. @@ -255,10 +556,22 @@ + * @NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI: The driver supports sched_scan + * for reporting BSSs with better RSSI than the current connected BSS + * (%NL80211_ATTR_SCHED_SCAN_RELATIVE_RSSI). ++ * @NL80211_EXT_FEATURE_CQM_RSSI_LIST: With this driver the ++ * %NL80211_ATTR_CQM_RSSI_THOLD attribute accepts a list of zero or more ++ * RSSI threshold values to monitor rather than exactly one threshold. ++ * @NL80211_EXT_FEATURE_FILS_SK_OFFLOAD: Driver SME supports FILS shared key ++ * authentication with %NL80211_CMD_CONNECT. ++ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK: Device wants to do 4-way ++ * handshake with PSK in station mode (PSK is passed as part of the connect ++ * and associate commands), doing it in the host might not be supported. ++ * @NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X: Device wants to do doing 4-way ++ * handshake with 802.1X in station mode (will pass EAP frames to the host ++ * and accept the set_pmk/del_pmk commands), doing it in the host might not ++ * be supported. * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. -@@ -4648,6 +4759,10 @@ enum nl80211_ext_feature_index { +@@ -4648,6 +4933,14 @@ enum nl80211_ext_feature_index { NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, NL80211_EXT_FEATURE_BEACON_RATE_HT, NL80211_EXT_FEATURE_BEACON_RATE_VHT, @@ -266,10 +579,14 @@ + NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA, + NL80211_EXT_FEATURE_MGMT_TX_RANDOM_TA_CONNECTED, + NL80211_EXT_FEATURE_SCHED_SCAN_RELATIVE_RSSI, ++ NL80211_EXT_FEATURE_CQM_RSSI_LIST, ++ NL80211_EXT_FEATURE_FILS_SK_OFFLOAD, ++ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_PSK, ++ NL80211_EXT_FEATURE_4WAY_HANDSHAKE_STA_1X, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -@@ -4687,6 +4802,21 @@ enum nl80211_connect_failed_reason { +@@ -4687,6 +4980,21 @@ enum nl80211_connect_failed_reason { }; /** @@ -291,7 +608,25 @@ * enum nl80211_scan_flags - scan request control flags * * Scan request control flags are used to control the handling -@@ -4900,8 +5030,9 @@ enum nl80211_sched_scan_plan { +@@ -4768,12 +5076,17 @@ enum nl80211_smps_mode { + * change to the channel status. + * @NL80211_RADAR_NOP_FINISHED: The Non-Occupancy Period for this channel is + * over, channel becomes usable. ++ * @NL80211_RADAR_PRE_CAC_EXPIRED: Channel Availability Check done on this ++ * non-operating channel is expired and no longer valid. New CAC must ++ * be done on this channel before starting the operation. This is not ++ * applicable for ETSI dfs domain where pre-CAC is valid for ever. + */ + enum nl80211_radar_event { + NL80211_RADAR_DETECTED, + NL80211_RADAR_CAC_FINISHED, + NL80211_RADAR_CAC_ABORTED, + NL80211_RADAR_NOP_FINISHED, ++ NL80211_RADAR_PRE_CAC_EXPIRED, + }; + + /** +@@ -4900,8 +5213,9 @@ enum nl80211_sched_scan_plan { /** * struct nl80211_bss_select_rssi_adjust - RSSI adjustment parameters. * @@ -303,3 +638,25 @@ */ struct nl80211_bss_select_rssi_adjust { __u8 band; +@@ -4942,21 +5256,6 @@ enum nl80211_bss_select_attr { + }; + + /** +- * enum nl80211_nan_dual_band_conf - NAN dual band configuration +- * +- * Defines the NAN dual band mode of operation +- * +- * @NL80211_NAN_BAND_DEFAULT: device default mode +- * @NL80211_NAN_BAND_2GHZ: 2.4GHz mode +- * @NL80211_NAN_BAND_5GHZ: 5GHz mode +- */ +-enum nl80211_nan_dual_band_conf { +- NL80211_NAN_BAND_DEFAULT = 1 << 0, +- NL80211_NAN_BAND_2GHZ = 1 << 1, +- NL80211_NAN_BAND_5GHZ = 1 << 2, +-}; +- +-/** + * enum nl80211_nan_function_type - NAN function type + * + * Defines the function type of a NAN function