From: John Crispin Date: Fri, 12 Sep 2014 06:54:05 +0000 (+0000) Subject: atheros: convert AR5312 GPIO code to platform driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a8799105d77032d2e448bd0d05486a3dc3cee24a;p=openwrt%2Fstaging%2Fdedeckeh.git atheros: convert AR5312 GPIO code to platform driver Signed-off-by: Sergey Ryazanov SVN-Revision: 42511 --- diff --git a/target/linux/atheros/config-3.14 b/target/linux/atheros/config-3.14 index 3f7c76ac25..5d1041a440 100644 --- a/target/linux/atheros/config-3.14 +++ b/target/linux/atheros/config-3.14 @@ -44,6 +44,7 @@ CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_SMP_IDLE_THREAD=y CONFIG_GPIOLIB=y +CONFIG_GPIO_AR5312=y CONFIG_GPIO_DEVRES=y CONFIG_GPIO_SYSFS=y # CONFIG_HAMRADIO is not set diff --git a/target/linux/atheros/patches-3.14/100-board.patch b/target/linux/atheros/patches-3.14/100-board.patch index 649ecf79d7..8ffa91caff 100644 --- a/target/linux/atheros/patches-3.14/100-board.patch +++ b/target/linux/atheros/patches-3.14/100-board.patch @@ -1292,7 +1292,7 @@ +#endif /* __ASM_MACH_AR231X_AR2315_REGS_H */ --- /dev/null +++ b/arch/mips/include/asm/mach-ar231x/ar5312_regs.h -@@ -0,0 +1,247 @@ +@@ -0,0 +1,235 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -1525,24 +1525,12 @@ +#define MEM_CFG1_AC1 0x00007000 /* bank 1: SDRAM addr check (added) */ +#define MEM_CFG1_AC1_S 12 + -+/* GPIO Address Map */ +#define AR5312_GPIO (AR5312_APBBASE + 0x2000) -+#define AR5312_GPIO_DO (AR5312_GPIO + 0x00) /* output register */ -+#define AR5312_GPIO_DI (AR5312_GPIO + 0x04) /* intput register */ -+#define AR5312_GPIO_CR (AR5312_GPIO + 0x08) /* control register */ -+ -+/* GPIO Control Register bit field definitions */ -+#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ -+#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */ -+#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */ -+#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt*/ -+#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ -+#define AR5312_NUM_GPIO 8 + +#endif /* __ASM_MACH_AR231X_AR5312_REGS_H */ --- /dev/null +++ b/arch/mips/ar231x/ar5312.c -@@ -0,0 +1,536 @@ +@@ -0,0 +1,476 @@ +/* + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive @@ -1687,51 +1675,6 @@ + irq_set_chained_handler(AR5312_IRQ_MISC_INTRS, ar5312_misc_irq_handler); +} + -+/* -+ * gpiolib implementations -+ */ -+static int -+ar5312_gpio_get_value(struct gpio_chip *chip, unsigned gpio) -+{ -+ return (ar231x_read_reg(AR5312_GPIO_DI) >> gpio) & 1; -+} -+ -+static void -+ar5312_gpio_set_value(struct gpio_chip *chip, unsigned gpio, int value) -+{ -+ u32 reg = ar231x_read_reg(AR5312_GPIO_DO); -+ -+ reg = value ? reg | (1 << gpio) : reg & ~(1 << gpio); -+ ar231x_write_reg(AR5312_GPIO_DO, reg); -+} -+ -+static int -+ar5312_gpio_direction_input(struct gpio_chip *chip, unsigned gpio) -+{ -+ ar231x_mask_reg(AR5312_GPIO_CR, 0, 1 << gpio); -+ return 0; -+} -+ -+static int -+ar5312_gpio_direction_output(struct gpio_chip *chip, unsigned gpio, int value) -+{ -+ ar231x_mask_reg(AR5312_GPIO_CR, 1 << gpio, 0); -+ ar5312_gpio_set_value(chip, gpio, value); -+ return 0; -+} -+ -+static struct gpio_chip ar5312_gpio_chip = { -+ .label = "ar5312-gpio", -+ .direction_input = ar5312_gpio_direction_input, -+ .direction_output = ar5312_gpio_direction_output, -+ .set = ar5312_gpio_set_value, -+ .get = ar5312_gpio_get_value, -+ .base = 0, -+ .ngpio = AR5312_NUM_GPIO, /* 8 */ -+}; -+ -+/* end of gpiolib */ -+ +static void ar5312_device_reset_set(u32 mask) +{ + u32 val; @@ -2024,20 +1967,6 @@ + mips_hpt_frequency = ar5312_cpu_frequency() / 2; +} + -+static int __init -+ar5312_gpio_init(void) -+{ -+ int ret = gpiochip_add(&ar5312_gpio_chip); -+ -+ if (ret) { -+ pr_err("%s: failed to add gpiochip\n", ar5312_gpio_chip.label); -+ return ret; -+ } -+ pr_info("%s: registered %d GPIOs\n", ar5312_gpio_chip.label, -+ ar5312_gpio_chip.ngpio); -+ return ret; -+} -+ +void __init +ar5312_prom_init(void) +{ @@ -2060,7 +1989,6 @@ + devid >>= AR5312_REV_WMAC_MIN_S; + devid &= AR5312_REV_CHIP; + ar231x_board.devid = (u16)devid; -+ ar5312_gpio_init(); +} + +void __init diff --git a/target/linux/atheros/patches-3.14/102-ar5312_gpio.patch b/target/linux/atheros/patches-3.14/102-ar5312_gpio.patch new file mode 100644 index 0000000000..79fdfa18e0 --- /dev/null +++ b/target/linux/atheros/patches-3.14/102-ar5312_gpio.patch @@ -0,0 +1,194 @@ +--- a/arch/mips/ar231x/Kconfig ++++ b/arch/mips/ar231x/Kconfig +@@ -1,6 +1,7 @@ + config SOC_AR5312 + bool "Atheros 5312/2312+ support" + depends on ATHEROS_AR231X ++ select GPIO_AR5312 + default y + + config SOC_AR2315 +--- a/arch/mips/ar231x/ar5312.c ++++ b/arch/mips/ar231x/ar5312.c +@@ -192,6 +192,22 @@ static struct platform_device ar5312_phy + .num_resources = 1, + }; + ++static struct resource ar5312_gpio_res[] = { ++ { ++ .name = "ar5312-gpio", ++ .flags = IORESOURCE_MEM, ++ .start = AR5312_GPIO, ++ .end = AR5312_GPIO + 0x0c - 1, ++ }, ++}; ++ ++static struct platform_device ar5312_gpio = { ++ .name = "ar5312-gpio", ++ .id = -1, ++ .resource = ar5312_gpio_res, ++ .num_resources = ARRAY_SIZE(ar5312_gpio_res), ++}; ++ + #ifdef CONFIG_LEDS_GPIO + static struct gpio_led ar5312_leds[] = { + { .name = "wlan", .gpio = 0, .active_low = 1, }, +@@ -282,6 +298,8 @@ int __init ar5312_init_devices(void) + + platform_device_register(&ar5312_physmap_flash); + ++ platform_device_register(&ar5312_gpio); ++ + #ifdef CONFIG_LEDS_GPIO + ar5312_leds[0].gpio = config->sys_led_gpio; + platform_device_register(&ar5312_gpio_leds); +--- a/drivers/gpio/Kconfig ++++ b/drivers/gpio/Kconfig +@@ -108,6 +108,13 @@ config GPIO_MAX730X + + comment "Memory mapped GPIO drivers:" + ++config GPIO_AR5312 ++ bool "AR5312 SoC GPIO support" ++ default y if SOC_AR5312 ++ depends on SOC_AR5312 ++ help ++ Say yes here to enable GPIO support for Atheros AR5312/AR2312+ SoCs. ++ + config GPIO_CLPS711X + tristate "CLPS711X GPIO support" + depends on ARCH_CLPS711X || COMPILE_TEST +--- a/drivers/gpio/Makefile ++++ b/drivers/gpio/Makefile +@@ -15,6 +15,7 @@ obj-$(CONFIG_GPIO_ADNP) += gpio-adnp.o + obj-$(CONFIG_GPIO_ADP5520) += gpio-adp5520.o + obj-$(CONFIG_GPIO_ADP5588) += gpio-adp5588.o + obj-$(CONFIG_GPIO_AMD8111) += gpio-amd8111.o ++obj-$(CONFIG_GPIO_AR5312) += gpio-ar5312.o + obj-$(CONFIG_GPIO_ARIZONA) += gpio-arizona.o + obj-$(CONFIG_GPIO_BCM_KONA) += gpio-bcm-kona.o + obj-$(CONFIG_GPIO_BT8XX) += gpio-bt8xx.o +--- /dev/null ++++ b/drivers/gpio/gpio-ar5312.c +@@ -0,0 +1,121 @@ ++/* ++ * This file is subject to the terms and conditions of the GNU General Public ++ * License. See the file "COPYING" in the main directory of this archive ++ * for more details. ++ * ++ * Copyright (C) 2003 Atheros Communications, Inc., All Rights Reserved. ++ * Copyright (C) 2006 FON Technology, SL. ++ * Copyright (C) 2006 Imre Kaloz ++ * Copyright (C) 2006-2009 Felix Fietkau ++ * Copyright (C) 2012 Alexandros C. Couloumbis ++ */ ++ ++#include ++#include ++#include ++#include ++ ++#define DRIVER_NAME "ar5312-gpio" ++ ++#define AR5312_GPIO_DO 0x00 /* output register */ ++#define AR5312_GPIO_DI 0x04 /* intput register */ ++#define AR5312_GPIO_CR 0x08 /* control register */ ++ ++#define AR5312_GPIO_CR_M(x) (1 << (x)) /* mask for i/o */ ++#define AR5312_GPIO_CR_O(x) (0 << (x)) /* mask for output */ ++#define AR5312_GPIO_CR_I(x) (1 << (x)) /* mask for input */ ++#define AR5312_GPIO_CR_INT(x) (1 << ((x)+8)) /* mask for interrupt */ ++#define AR5312_GPIO_CR_UART(x) (1 << ((x)+16)) /* uart multiplex */ ++ ++#define AR5312_GPIO_NUM 8 ++ ++static void __iomem *ar5312_mem; ++ ++static inline u32 ar5312_gpio_reg_read(unsigned reg) ++{ ++ return __raw_readl(ar5312_mem + reg); ++} ++ ++static inline void ar5312_gpio_reg_write(unsigned reg, u32 val) ++{ ++ __raw_writel(val, ar5312_mem + reg); ++} ++ ++static inline void ar5312_gpio_reg_mask(unsigned reg, u32 mask, u32 val) ++{ ++ ar5312_gpio_reg_write(reg, (ar5312_gpio_reg_read(reg) & ~mask) | val); ++} ++ ++static int ar5312_gpio_get_val(struct gpio_chip *chip, unsigned gpio) ++{ ++ return (ar5312_gpio_reg_read(AR5312_GPIO_DI) >> gpio) & 1; ++} ++ ++static void ar5312_gpio_set_val(struct gpio_chip *chip, unsigned gpio, int val) ++{ ++ u32 reg = ar5312_gpio_reg_read(AR5312_GPIO_DO); ++ ++ reg = val ? reg | (1 << gpio) : reg & ~(1 << gpio); ++ ar5312_gpio_reg_write(AR5312_GPIO_DO, reg); ++} ++ ++static int ar5312_gpio_dir_in(struct gpio_chip *chip, unsigned gpio) ++{ ++ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 0, 1 << gpio); ++ return 0; ++} ++ ++static int ar5312_gpio_dir_out(struct gpio_chip *chip, unsigned gpio, int val) ++{ ++ ar5312_gpio_reg_mask(AR5312_GPIO_CR, 1 << gpio, 0); ++ ar5312_gpio_set_val(chip, gpio, val); ++ return 0; ++} ++ ++static struct gpio_chip ar5312_gpio_chip = { ++ .label = DRIVER_NAME, ++ .direction_input = ar5312_gpio_dir_in, ++ .direction_output = ar5312_gpio_dir_out, ++ .set = ar5312_gpio_set_val, ++ .get = ar5312_gpio_get_val, ++ .base = 0, ++ .ngpio = AR5312_GPIO_NUM, ++}; ++ ++static int ar5312_gpio_probe(struct platform_device *pdev) ++{ ++ struct device *dev = &pdev->dev; ++ struct resource *res; ++ int ret; ++ ++ if (ar5312_mem) ++ return -EBUSY; ++ ++ res = platform_get_resource(pdev, IORESOURCE_MEM, 0); ++ ar5312_mem = devm_ioremap_resource(dev, res); ++ if (IS_ERR(ar5312_mem)) ++ return PTR_ERR(ar5312_mem); ++ ++ ar5312_gpio_chip.dev = dev; ++ ret = gpiochip_add(&ar5312_gpio_chip); ++ if (ret) { ++ dev_err(dev, "failed to add gpiochip\n"); ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static struct platform_driver ar5312_gpio_driver = { ++ .probe = ar5312_gpio_probe, ++ .driver = { ++ .name = DRIVER_NAME, ++ .owner = THIS_MODULE, ++ } ++}; ++ ++static int __init ar5312_gpio_init(void) ++{ ++ return platform_driver_register(&ar5312_gpio_driver); ++} ++subsys_initcall(ar5312_gpio_init); diff --git a/target/linux/atheros/patches-3.14/105-ar2315_pci.patch b/target/linux/atheros/patches-3.14/105-ar2315_pci.patch index 0f1c326bc0..7630e94d25 100644 --- a/target/linux/atheros/patches-3.14/105-ar2315_pci.patch +++ b/target/linux/atheros/patches-3.14/105-ar2315_pci.patch @@ -358,7 +358,7 @@ +} --- a/arch/mips/ar231x/Kconfig +++ b/arch/mips/ar231x/Kconfig -@@ -7,3 +7,10 @@ config SOC_AR2315 +@@ -8,3 +8,10 @@ config SOC_AR2315 bool "Atheros 2315+ support" depends on ATHEROS_AR231X default y