From: Christian Marangi <ansuelsmth@gmail.com>
Date: Sat, 17 Jun 2023 00:21:53 +0000 (+0200)
Subject: ipq806x: 6.1: restore missing dts for Netgear XR450
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a860e439edefc941b1b5e2d4adf3956b353f4f90;p=openwrt%2Fstaging%2Fthess.git

ipq806x: 6.1: restore missing dts for Netgear XR450

In pushing and refreshing 6.1 pull request, dbac8e8819dd ("ipq806x: 6.1:
copy patches, files and config from 5.15") wasn't correctly updated and
resulted in missing the dts for Netgear XR450. This caused compilation
error with Netgear R7800 or XR500 if testing kernel version was used.

Fix this by adding back the missing dts for Netgear XR450 from kernel
5.15.

Fixes: dbac8e8819dd ("ipq806x: 6.1: copy patches, files and config from 5.15")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
---

diff --git a/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts
new file mode 100644
index 0000000000..4353aec7ac
--- /dev/null
+++ b/target/linux/ipq806x/files-6.1/arch/arm/boot/dts/qcom-ipq8065-xr450.dts
@@ -0,0 +1,50 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+
+#include "qcom-ipq8065-nighthawk.dtsi"
+
+/ {
+	model = "Netgear Nighthawk XR450";
+	compatible = "netgear,xr450", "qcom,ipq8065", "qcom,ipq8064";
+
+};
+
+&leds {
+	usb1 {
+		label = "white:usb1";
+		gpios = <&qcom_pinmux 8 GPIO_ACTIVE_HIGH>;
+	};
+
+	usb2 {
+		label = "white:usb2";
+		gpios = <&qcom_pinmux 26 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&partitions {
+	partition@1880000 {
+		label = "ubi";
+		reg = <0x1880000 0xce00000>;
+	};
+
+	partition@e680000 {
+		label = "reserve";
+		reg = <0xe680000 0x0780000>;
+		read-only;
+	};
+};
+
+&wifi0 {
+	nvmem-cells = <&macaddr_art_c>, <&precal_art_1000>;
+	nvmem-cell-names = "mac-address", "pre-calibration";
+};
+
+&wifi1 {
+	nvmem-cells = <&macaddr_art_0>, <&precal_art_5000>;
+	nvmem-cell-names = "mac-address", "pre-calibration";
+};
+
+&art {
+	macaddr_art_c: macaddr@c {
+		reg = <0xc 0x6>;
+	};
+};