From: Shiji Yang Date: Fri, 28 Jun 2024 07:50:57 +0000 (+0800) Subject: ramips: remove useless compatible strings from SoC dtsi X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a7f37b401b9d80600dae74f0f26c6a3f52c1c803;p=openwrt%2Fstaging%2Fansuel.git ramips: remove useless compatible strings from SoC dtsi These removed compatible strings do not exist in the source code nor the dt-binding documents. They are useless. Signed-off-by: Shiji Yang --- diff --git a/target/linux/ramips/dts/mt7620a.dtsi b/target/linux/ramips/dts/mt7620a.dtsi index 65122304c9..4ba4b48bef 100644 --- a/target/linux/ramips/dts/mt7620a.dtsi +++ b/target/linux/ramips/dts/mt7620a.dtsi @@ -48,7 +48,7 @@ }; timer: timer@100 { - compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer"; + compatible = "ralink,rt2880-timer"; reg = <0x100 0x20>; clocks = <&sysc 5>; @@ -58,7 +58,7 @@ }; watchdog: watchdog@120 { - compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt"; + compatible = "ralink,rt2880-wdt"; reg = <0x120 0x10>; clocks = <&sysc 6>; @@ -71,7 +71,7 @@ }; intc: intc@200 { - compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc"; + compatible = "ralink,rt2880-intc"; reg = <0x200 0x100>; interrupt-controller; @@ -106,7 +106,7 @@ }; gpio0: gpio@600 { - compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x600 0x34>; interrupt-parent = <&intc>; @@ -123,7 +123,7 @@ }; gpio1: gpio@638 { - compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x638 0x24>; interrupt-parent = <&intc>; @@ -142,7 +142,7 @@ }; gpio2: gpio@660 { - compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x660 0x24>; interrupt-parent = <&intc>; @@ -161,7 +161,7 @@ }; gpio3: gpio@688 { - compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x688 0x24>; interrupt-parent = <&intc>; @@ -220,7 +220,7 @@ }; spi0: spi@b00 { - compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt2880-spi"; reg = <0xb00 0x40>; clocks = <&sysc 10>; @@ -465,14 +465,14 @@ mediatek,switch = <&gsw>; port@4 { - compatible = "mediatek,mt7620a-gsw-port", "mediatek,eth-port"; + compatible = "mediatek,eth-port"; reg = <4>; status = "disabled"; }; port@5 { - compatible = "mediatek,mt7620a-gsw-port", "mediatek,eth-port"; + compatible = "mediatek,eth-port"; reg = <5>; status = "disabled"; diff --git a/target/linux/ramips/dts/mt7620n.dtsi b/target/linux/ramips/dts/mt7620n.dtsi index 4f07c6bc4b..a844198f66 100644 --- a/target/linux/ramips/dts/mt7620n.dtsi +++ b/target/linux/ramips/dts/mt7620n.dtsi @@ -48,7 +48,7 @@ }; timer: timer@100 { - compatible = "ralink,mt7620a-timer", "ralink,rt2880-timer"; + compatible = "ralink,rt2880-timer"; reg = <0x100 0x20>; clocks = <&sysc 5>; @@ -58,7 +58,7 @@ }; watchdog: watchdog@120 { - compatible = "ralink,mt7620a-wdt", "ralink,rt2880-wdt"; + compatible = "ralink,rt2880-wdt"; reg = <0x120 0x10>; clocks = <&sysc 6>; @@ -71,7 +71,7 @@ }; intc: intc@200 { - compatible = "ralink,mt7620a-intc", "ralink,rt2880-intc"; + compatible = "ralink,rt2880-intc"; reg = <0x200 0x100>; interrupt-controller; @@ -90,7 +90,7 @@ }; gpio0: gpio@600 { - compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x600 0x34>; interrupt-parent = <&intc>; @@ -107,7 +107,7 @@ }; gpio1: gpio@638 { - compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x638 0x24>; interrupt-parent = <&intc>; @@ -126,7 +126,7 @@ }; gpio2: gpio@660 { - compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x660 0x24>; interrupt-parent = <&intc>; @@ -145,7 +145,7 @@ }; gpio3: gpio@688 { - compatible = "ralink,mt7620a-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x688 0x24>; interrupt-parent = <&intc>; @@ -182,7 +182,7 @@ }; spi0: spi@b00 { - compatible = "ralink,mt7620a-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt2880-spi"; reg = <0xb00 0x40>; clocks = <&sysc 10>; diff --git a/target/linux/ramips/dts/mt7628an.dtsi b/target/linux/ramips/dts/mt7628an.dtsi index 906ea03fe9..be80c11d11 100644 --- a/target/linux/ramips/dts/mt7628an.dtsi +++ b/target/linux/ramips/dts/mt7628an.dtsi @@ -52,7 +52,7 @@ }; intc: intc@200 { - compatible = "ralink,mt7628an-intc", "ralink,rt2880-intc"; + compatible = "ralink,rt2880-intc"; reg = <0x200 0x100>; interrupt-controller; @@ -418,7 +418,7 @@ }; esw: esw@10110000 { - compatible = "mediatek,mt7628-esw", "ralink,rt3050-esw"; + compatible = "ralink,rt3050-esw"; reg = <0x10110000 0x8000>; resets = <&sysc 24>; diff --git a/target/linux/ramips/dts/rt2880.dtsi b/target/linux/ramips/dts/rt2880.dtsi index 998b49a277..5ac2d2e3b8 100644 --- a/target/linux/ramips/dts/rt2880.dtsi +++ b/target/linux/ramips/dts/rt2880.dtsi @@ -218,7 +218,7 @@ status = "disabled"; port@0 { - compatible = "ralink,rt2880-port", "mediatek,eth-port"; + compatible = "mediatek,eth-port"; reg = <0>; }; diff --git a/target/linux/ramips/dts/rt3050.dtsi b/target/linux/ramips/dts/rt3050.dtsi index 30a3f898cd..80d0f1585b 100644 --- a/target/linux/ramips/dts/rt3050.dtsi +++ b/target/linux/ramips/dts/rt3050.dtsi @@ -47,7 +47,7 @@ }; timer: timer@100 { - compatible = "ralink,rt3050-timer", "ralink,rt2880-timer"; + compatible = "ralink,rt2880-timer"; reg = <0x100 0x20>; clocks = <&sysc 3>; @@ -57,7 +57,7 @@ }; watchdog: watchdog@120 { - compatible = "ralink,rt3050-wdt", "ralink,rt2880-wdt"; + compatible = "ralink,rt2880-wdt"; reg = <0x120 0x10>; clocks = <&sysc 4>; @@ -70,7 +70,7 @@ }; intc: intc@200 { - compatible = "ralink,rt3050-intc", "ralink,rt2880-intc"; + compatible = "ralink,rt2880-intc"; reg = <0x200 0x100>; interrupt-controller; @@ -89,7 +89,7 @@ }; uart: uart@500 { - compatible = "ralink,rt3050-uart", "ralink,rt2880-uart", "ns16550a"; + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; reg = <0x500 0x100>; clocks = <&sysc 5>; @@ -105,7 +105,7 @@ }; gpio0: gpio@600 { - compatible = "ralink,rt3050-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x600 0x34>; gpio-controller; @@ -122,7 +122,7 @@ }; gpio1: gpio@638 { - compatible = "ralink,rt3050-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x638 0x24>; gpio-controller; @@ -138,7 +138,7 @@ }; gpio2: gpio@660 { - compatible = "ralink,rt3050-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x660 0x24>; gpio-controller; @@ -209,7 +209,7 @@ }; spi0: spi@b00 { - compatible = "ralink,rt3050-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt2880-spi"; reg = <0xb00 0x100>; resets = <&sysc 18>; @@ -227,7 +227,7 @@ }; uartlite: uartlite@c00 { - compatible = "ralink,rt3050-uart", "ralink,rt2880-uart", "ns16550a"; + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; reg = <0xc00 0x100>; clocks = <&sysc 10>; diff --git a/target/linux/ramips/dts/rt3352.dtsi b/target/linux/ramips/dts/rt3352.dtsi index b4829cb1b1..0690589e5d 100644 --- a/target/linux/ramips/dts/rt3352.dtsi +++ b/target/linux/ramips/dts/rt3352.dtsi @@ -48,7 +48,7 @@ }; timer: timer@100 { - compatible = "ralink,rt3352-timer", "ralink,rt2880-timer"; + compatible = "ralink,rt2880-timer"; reg = <0x100 0x20>; clocks = <&sysc 4>; @@ -58,7 +58,7 @@ }; watchdog: watchdog@120 { - compatible = "ralink,rt3352-wdt", "ralink,rt2880-wdt"; + compatible = "ralink,rt2880-wdt"; reg = <0x120 0x10>; clocks = <&sysc 5>; @@ -71,7 +71,7 @@ }; intc: intc@200 { - compatible = "ralink,rt3352-intc", "ralink,rt2880-intc"; + compatible = "ralink,rt2880-intc"; reg = <0x200 0x100>; interrupt-controller; @@ -82,7 +82,7 @@ }; memc: memc@300 { - compatible = "ralink,rt3352-memc", "ralink,rt3050-memc"; + compatible = "ralink,rt3050-memc"; reg = <0x300 0x100>; interrupt-parent = <&intc>; @@ -90,7 +90,7 @@ }; uart: uart@500 { - compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a"; + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; reg = <0x500 0x100>; clocks = <&sysc 6>; @@ -106,7 +106,7 @@ }; gpio0: gpio@600 { - compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x600 0x34>; gpio-controller; @@ -123,7 +123,7 @@ }; gpio1: gpio@638 { - compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x638 0x24>; gpio-controller; @@ -139,7 +139,7 @@ }; gpio2: gpio@660 { - compatible = "ralink,rt3352-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x660 0x24>; gpio-controller; @@ -195,7 +195,7 @@ }; spi0: spi@b00 { - compatible = "ralink,rt3352-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt2880-spi"; reg = <0xb00 0x40>; #address-cells = <1>; #size-cells = <0>; @@ -212,7 +212,7 @@ }; spi1: spi@b40 { - compatible = "ralink,rt3352-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt2880-spi"; reg = <0xb40 0x60>; #address-cells = <1>; #size-cells = <0>; @@ -227,7 +227,7 @@ }; uartlite: uartlite@c00 { - compatible = "ralink,rt3352-uart", "ralink,rt2880-uart", "ns16550a"; + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; reg = <0xc00 0x100>; clocks = <&sysc 11>; @@ -314,7 +314,7 @@ }; ethernet: ethernet@10100000 { - compatible = "ralink,rt3352-eth", "ralink,rt3050-eth"; + compatible = "ralink,rt3050-eth"; reg = <0x10100000 0x10000>; clocks = <&sysc 12>; @@ -329,7 +329,7 @@ }; esw: esw@10110000 { - compatible = "ralink,rt3352-esw", "ralink,rt3050-esw"; + compatible = "ralink,rt3050-esw"; reg = <0x10110000 0x8000>; resets = <&sysc 24>; diff --git a/target/linux/ramips/dts/rt3883.dtsi b/target/linux/ramips/dts/rt3883.dtsi index 8c76eb6631..d2557d4559 100644 --- a/target/linux/ramips/dts/rt3883.dtsi +++ b/target/linux/ramips/dts/rt3883.dtsi @@ -48,7 +48,7 @@ }; timer: timer@100 { - compatible = "ralink,rt3883-timer", "ralink,rt2880-timer"; + compatible = "ralink,rt2880-timer"; reg = <0x100 0x20>; clocks = <&sysc 3>; @@ -58,7 +58,7 @@ }; watchdog: watchdog@120 { - compatible = "ralink,rt3883-wdt", "ralink,rt2880-wdt"; + compatible = "ralink,rt2880-wdt"; reg = <0x120 0x10>; clocks = <&sysc 4>; @@ -71,7 +71,7 @@ }; intc: intc@200 { - compatible = "ralink,rt3883-intc", "ralink,rt2880-intc"; + compatible = "ralink,rt2880-intc"; reg = <0x200 0x100>; interrupt-controller; @@ -106,7 +106,7 @@ }; gpio0: gpio@600 { - compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x600 0x34>; interrupt-parent = <&intc>; @@ -123,7 +123,7 @@ }; gpio1: gpio@638 { - compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x638 0x24>; gpio-controller; @@ -139,7 +139,7 @@ }; gpio2: gpio@660 { - compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x660 0x24>; gpio-controller; @@ -155,7 +155,7 @@ }; gpio3: gpio@688 { - compatible = "ralink,rt3883-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x688 0x24>; gpio-controller; @@ -211,7 +211,7 @@ }; spi0: spi@b00 { - compatible = "ralink,rt3883-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt2880-spi"; reg = <0xb00 0x40>; #address-cells = <1>; #size-cells = <0>; @@ -228,7 +228,7 @@ }; spi1: spi@b40 { - compatible = "ralink,rt3883-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt2880-spi"; reg = <0xb40 0x60>; #address-cells = <1>; #size-cells = <0>; @@ -339,7 +339,7 @@ interrupts = <5>; port@0 { - compatible = "ralink,rt3883-port", "mediatek,eth-port"; + compatible = "mediatek,eth-port"; reg = <0>; }; diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi index 30f6435842..6b54291800 100644 --- a/target/linux/ramips/dts/rt5350.dtsi +++ b/target/linux/ramips/dts/rt5350.dtsi @@ -48,7 +48,7 @@ }; timer: timer@100 { - compatible = "ralink,rt5350-timer", "ralink,rt2880-timer"; + compatible = "ralink,rt2880-timer"; reg = <0x100 0x20>; clocks = <&sysc 4>; @@ -58,7 +58,7 @@ }; watchdog: watchdog@120 { - compatible = "ralink,rt5350-wdt", "ralink,rt2880-wdt"; + compatible = "ralink,rt2880-wdt"; reg = <0x120 0x10>; clocks = <&sysc 5>; @@ -71,7 +71,7 @@ }; intc: intc@200 { - compatible = "ralink,rt5350-intc", "ralink,rt2880-intc"; + compatible = "ralink,rt2880-intc"; reg = <0x200 0x100>; interrupt-controller; @@ -90,7 +90,7 @@ }; uart: uart@500 { - compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a"; + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; reg = <0x500 0x100>; clocks = <&sysc 6>; @@ -106,7 +106,7 @@ }; gpio0: gpio@600 { - compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x600 0x34>; interrupt-parent = <&intc>; @@ -123,7 +123,7 @@ }; gpio1: gpio@660 { - compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; + compatible = "ralink,rt2880-gpio"; reg = <0x660 0x24>; interrupt-parent = <&intc>; @@ -182,7 +182,7 @@ }; spi0: spi@b00 { - compatible = "ralink,rt5350-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt2880-spi"; reg = <0xb00 0x40>; clocks = <&sysc 9>; @@ -200,7 +200,7 @@ }; spi1: spi@b40 { - compatible = "ralink,rt5350-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt2880-spi"; reg = <0xb40 0x60>; clocks = <&sysc 10>; @@ -218,7 +218,7 @@ }; uartlite: uartlite@c00 { - compatible = "ralink,rt5350-uart", "ralink,rt2880-uart", "ns16550a"; + compatible = "ralink,rt3052-uart", "ralink,rt2880-uart", "ns16550a"; reg = <0xc00 0x100>; clocks = <&sysc 11>; @@ -350,7 +350,7 @@ }; esw: esw@10110000 { - compatible = "ralink,rt5350-esw", "ralink,rt3050-esw"; + compatible = "ralink,rt3050-esw"; reg = <0x10110000 0x8000>; resets = <&sysc 24>; diff --git a/target/linux/ramips/patches-6.6/801-DT-Add-documentation-for-gpio-ralink.patch b/target/linux/ramips/patches-6.6/801-DT-Add-documentation-for-gpio-ralink.patch index 93dabf8776..976029c18c 100644 --- a/target/linux/ramips/patches-6.6/801-DT-Add-documentation-for-gpio-ralink.patch +++ b/target/linux/ramips/patches-6.6/801-DT-Add-documentation-for-gpio-ralink.patch @@ -40,7 +40,7 @@ Cc: linux-gpio@vger.kernel.org +Example: + + gpio0: gpio@600 { -+ compatible = "ralink,rt5350-gpio", "ralink,rt2880-gpio"; ++ compatible = "ralink,rt2880-gpio"; + + #gpio-cells = <2>; + gpio-controller;