From: Alexey Belyaev Date: Thu, 27 Apr 2017 18:02:05 +0000 (+0600) Subject: ramips: add new device ZyXEL Keenetic as kn X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a7cbf59e0e04a24b91a112e9b2e1a72ed5b4c1f6;p=openwrt%2Fstaging%2Fkaloz.git ramips: add new device ZyXEL Keenetic as kn This device exactly same as NBG-419N but with USB port and USB Led. Specification: - SoC: Ralink RT3052 (MIPS24Kc) @384MHz - RAM: 32 MiB - Flash: 8 MiB - WLAN: WiSoC 2T2R/300Mbps (2.4GHz) - LAN: 4x100M - WAN: 1x100M - USB: 1x2.0 Installation via serial console (57600 8N1) from TFTP server - rename the firmware to something shorter, for example "sysupgrade.bin" (max. 32 chars) - copy firmware TFTP server's directory - when you power on device, and see U-Boot log, immediatly push "2" once. - You will see this message: 2: System Load Linux Kernel then write to Flash via TFTP. Warning!! Erase Linux in Flash then burn new one. Are you sure? - Push "y", and enter: device IP, then TFTP server's IP, and then image firmware file name. The firmware will be downloaded within ~30 seconds and flashed to the device (It will take about 2 minutes). Signed-off-by: Alexey Belyaev [squash commits, compact commit message, fix compatible string, remove superfluous pinmuxes] Signed-off-by: Mathias Kresin --- diff --git a/target/linux/ramips/base-files/etc/board.d/01_leds b/target/linux/ramips/base-files/etc/board.d/01_leds index 52542ec265..9322228a10 100755 --- a/target/linux/ramips/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/base-files/etc/board.d/01_leds @@ -222,6 +222,11 @@ ht-tm02) ucidef_set_led_netdev "eth" "Ethernet" "$board:green:lan" "eth0" set_wifi_led "$board:blue:wlan" ;; +kn|\ +nbg-419n2) + set_usb_led "$board:green:usb" + set_wifi_led "rt2800pci-phy0::radio" + ;; kn_rc|\ kn_rf|\ kng_rc) @@ -265,10 +270,6 @@ mzk-ex750np) na930) set_usb_led "$board:blue:status" ;; -nbg-419n2) - set_usb_led "$board:green:usb" - set_wifi_led "rt2800pci-phy0::radio" - ;; newifi-d1) set_usb_led "$board:red:status" ;; diff --git a/target/linux/ramips/base-files/etc/board.d/02_network b/target/linux/ramips/base-files/etc/board.d/02_network index 80a3bc2c51..cefc4f41fe 100755 --- a/target/linux/ramips/base-files/etc/board.d/02_network +++ b/target/linux/ramips/base-files/etc/board.d/02_network @@ -84,6 +84,7 @@ ramips_setup_interfaces() hc5661a|\ hc5962|\ hlk-rm04|\ + kn|\ kn_rc|\ mac1200rv2|\ miwifi-mini|\ diff --git a/target/linux/ramips/base-files/etc/diag.sh b/target/linux/ramips/base-files/etc/diag.sh index 461f46c26b..a36ce54675 100644 --- a/target/linux/ramips/base-files/etc/diag.sh +++ b/target/linux/ramips/base-files/etc/diag.sh @@ -24,6 +24,7 @@ get_status_led() { e1700|\ ex3700|\ fonera20n|\ + kn|\ kn_rc|\ kn_rf|\ kng_rc|\ diff --git a/target/linux/ramips/base-files/lib/ramips.sh b/target/linux/ramips/base-files/lib/ramips.sh index 87cb7ffb91..506a98230a 100755 --- a/target/linux/ramips/base-files/lib/ramips.sh +++ b/target/linux/ramips/base-files/lib/ramips.sh @@ -670,6 +670,9 @@ ramips_board_detect() { *"ZBT-WR8305RT") name="zbt-wr8305rt" ;; + *"ZyXEL Keenetic") + name="kn" + ;; *"ZyXEL Keenetic Omni") name="kn_rc" ;; diff --git a/target/linux/ramips/base-files/lib/upgrade/platform.sh b/target/linux/ramips/base-files/lib/upgrade/platform.sh index adad8dae75..039009303b 100755 --- a/target/linux/ramips/base-files/lib/upgrade/platform.sh +++ b/target/linux/ramips/base-files/lib/upgrade/platform.sh @@ -76,6 +76,7 @@ platform_check_image() { jhr-n805r|\ jhr-n825r|\ jhr-n926r|\ + kn|\ kn_rc|\ kn_rf|\ kng_rc|\ diff --git a/target/linux/ramips/dts/kn.dts b/target/linux/ramips/dts/kn.dts new file mode 100644 index 0000000000..77b047c094 --- /dev/null +++ b/target/linux/ramips/dts/kn.dts @@ -0,0 +1,113 @@ +/dts-v1/; + +#include "rt3050.dtsi" + +#include +#include + +/ { + compatible = "zyxel,keenetic", "ralink,rt3052-soc"; + model = "ZyXEL Keenetic"; + + cfi@1f000000 { + compatible = "cfi-flash"; + reg = <0x1f000000 0x800000>; + bank-width = <2>; + device-width = <2>; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0x3b0000>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + power { + label = "kn:green:power"; + gpios = <&gpio0 9 GPIO_ACTIVE_LOW>; + }; + + usb { + label = "kn:green:usb"; + gpios = <&gpio0 13 GPIO_ACTIVE_LOW>; + }; + + wps { + label = "kn:green:wps"; + gpios = <&gpio0 14 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-keys-polled { + compatible = "gpio-keys-polled"; + #address-cells = <1>; + #size-cells = <0>; + poll-interval = <20>; + + reset { + label = "reset"; + gpios = <&gpio0 10 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + + rfkill { + label = "rfkill"; + gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>; + linux,code = ; + linux,input-type = ; + }; + + wps { + label = "wps"; + gpios = <&gpio0 0 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; +}; + +&pinctrl { + state_default: pinctrl0 { + gpio { + ralink,group = "uartf"; + ralink,function = "gpio"; + }; + }; +}; + +ðernet { + mtd-mac-address = <&factory 0x28>; +}; + +&esw { + mediatek,portmap = <0x2f>; +}; + +&wmac { + ralink,mtd-eeprom = <&factory 0>; +}; + +&otg { + status = "okay"; +}; diff --git a/target/linux/ramips/image/rt305x.mk b/target/linux/ramips/image/rt305x.mk index 69533ce9e7..62ced9b7de 100644 --- a/target/linux/ramips/image/rt305x.mk +++ b/target/linux/ramips/image/rt305x.mk @@ -850,3 +850,12 @@ define Device/xdxrn502j DEVICE_TITLE := XDX RN502J endef TARGET_DEVICES += xdxrn502j + +define Device/kn + DTS := kn + BLOCKSIZE := 64k + IMAGE_SIZE := $(ralink_default_fw_size_4M) + DEVICE_TITLE := ZyXEL Keenetic + DEVICE_PACKAGES := kmod-usb-core kmod-usb2 kmod-usb-ehci kmod-usb-ledtrig-usbport +endef +TARGET_DEVICES += kn