From: Mathew McBride Date: Tue, 6 Jun 2023 07:39:14 +0000 (+0000) Subject: layerscape: add patches for SFP support on DPAA2 platforms X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a7bd96c98f8f6901f7c163719847611af22d5471;p=openwrt%2Fstaging%2Fjogo.git layerscape: add patches for SFP support on DPAA2 platforms This is required for managed operation of the SFP ports on the Ten64 (LS1088A) and other boards. The two issues resolved are: - Validation of 10G SFP link modes fail as Linux did not consider the equivalence of modes like XFI, 10GBase-R - Fix a locking issue that prevented the system rebooting when SFP ports were controlled by the SFP driver. Please note, these patches are replaced by upstream ones in 6.x, see: commit 61ec9a8154a5 ("armvirt: add SFP support patches for NXP Layerscape DPAA2 platforms") in OpenWrt for the relevant patches. Signed-off-by: Mathew McBride --- diff --git a/target/linux/layerscape/patches-5.15/703-net-dpaa2-mac-add-support-for-more-10G-modes.patch b/target/linux/layerscape/patches-5.15/703-net-dpaa2-mac-add-support-for-more-10G-modes.patch new file mode 100644 index 0000000000..0bd96f1f4f --- /dev/null +++ b/target/linux/layerscape/patches-5.15/703-net-dpaa2-mac-add-support-for-more-10G-modes.patch @@ -0,0 +1,34 @@ +From c314138bd045e050432158ab021160de3ba51c5e Mon Sep 17 00:00:00 2001 +From: Russell King +Date: Thu, 30 Jan 2020 22:42:38 +0000 +Subject: [PATCH 2/4] net: dpaa2-mac: add support for more 10G modes + +Phylink documentation says: + * Note that the PHY may be able to transform from one connection + * technology to another, so, eg, don't clear 1000BaseX just + * because the MAC is unable to BaseX mode. This is more about + * clearing unsupported speeds and duplex settings. The port modes + * should not be cleared; phylink_set_port_modes() will help with this. + +So add the missing 10G modes. + +Signed-off-by: Russell King +--- + drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 6 ++++++ + 1 file changed, 6 insertions(+) + +--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c ++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c +@@ -140,6 +140,12 @@ static void dpaa2_mac_validate(struct ph + case PHY_INTERFACE_MODE_10GBASER: + case PHY_INTERFACE_MODE_USXGMII: + phylink_set(mask, 10000baseT_Full); ++ phylink_set(mask, 10000baseKR_Full); ++ phylink_set(mask, 10000baseCR_Full); ++ phylink_set(mask, 10000baseSR_Full); ++ phylink_set(mask, 10000baseLR_Full); ++ phylink_set(mask, 10000baseLRM_Full); ++ phylink_set(mask, 10000baseER_Full); + if (state->interface == PHY_INTERFACE_MODE_10GBASER) + break; + phylink_set(mask, 5000baseT_Full); diff --git a/target/linux/layerscape/patches-5.15/704-dpaa2-eth-do-not-hold-rtnl_lock.patch b/target/linux/layerscape/patches-5.15/704-dpaa2-eth-do-not-hold-rtnl_lock.patch new file mode 100644 index 0000000000..c7d16e5c4c --- /dev/null +++ b/target/linux/layerscape/patches-5.15/704-dpaa2-eth-do-not-hold-rtnl_lock.patch @@ -0,0 +1,74 @@ +From d5af37ae22f0364be9ded773d737dd6e5b207b10 Mon Sep 17 00:00:00 2001 +From: Ioana Ciornei +Date: Thu, 21 Nov 2019 21:15:25 +0200 +Subject: [PATCH 3/4] dpaa2-eth: do not hold rtnl_lock on phylink_create() or + _destroy() + +The rtnl_lock should not be held when calling phylink_create() or +phylink_destroy() since it leads to the deadlock listed below: + +[ 18.656576] rtnl_lock+0x18/0x20 +[ 18.659798] sfp_bus_add_upstream+0x28/0x90 +[ 18.663974] phylink_create+0x2cc/0x828 +[ 18.667803] dpaa2_mac_connect+0x14c/0x2a8 +[ 18.671890] dpaa2_eth_connect_mac+0x94/0xd8 + +Fix this by moving the _lock() and _unlock() calls just outside of +phylink_of_phy_connect() and phylink_disconnect_phy(). + +Fixes: 719479230893 ("dpaa2-eth: add MAC/PHY support through phylink") +Reported-by: Russell King +Signed-off-by: Ioana Ciornei +Signed-off-by: Russell King +--- + drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c | 4 ---- + drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c | 4 ++++ + 2 files changed, 4 insertions(+), 4 deletions(-) + +--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c ++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-eth.c +@@ -4217,12 +4217,10 @@ static irqreturn_t dpni_irq0_handler_thr + dpaa2_eth_set_mac_addr(netdev_priv(net_dev)); + dpaa2_eth_update_tx_fqids(priv); + +- rtnl_lock(); + if (dpaa2_eth_has_mac(priv)) + dpaa2_eth_disconnect_mac(priv); + else + dpaa2_eth_connect_mac(priv); +- rtnl_unlock(); + } + + return IRQ_HANDLED; +@@ -4516,9 +4514,7 @@ static int dpaa2_eth_remove(struct fsl_m + #endif + + unregister_netdev(net_dev); +- rtnl_lock(); + dpaa2_eth_disconnect_mac(priv); +- rtnl_unlock(); + + dpaa2_eth_dl_port_del(priv); + dpaa2_eth_dl_traps_unregister(priv); +--- a/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c ++++ b/drivers/net/ethernet/freescale/dpaa2/dpaa2-mac.c +@@ -357,7 +357,9 @@ int dpaa2_mac_connect(struct dpaa2_mac * + if (mac->pcs) + phylink_set_pcs(mac->phylink, &mac->pcs->pcs); + ++ rtnl_lock(); + err = phylink_fwnode_phy_connect(mac->phylink, dpmac_node, 0); ++ rtnl_unlock(); + if (err) { + netdev_err(net_dev, "phylink_fwnode_phy_connect() = %d\n", err); + goto err_phylink_destroy; +@@ -378,7 +380,9 @@ void dpaa2_mac_disconnect(struct dpaa2_m + if (!mac->phylink) + return; + ++ rtnl_lock(); + phylink_disconnect_phy(mac->phylink); ++ rtnl_unlock(); + phylink_destroy(mac->phylink); + dpaa2_pcs_destroy(mac); + }