From: Jonas Gorski Date: Sun, 27 May 2012 13:22:40 +0000 (+0000) Subject: bcm63xx: fix port state after network down X-Git-Tag: reboot~13815 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a7a82db16f1a910ee379a0435069fa8889360488;p=openwrt%2Fstaging%2Fchunkeey.git bcm63xx: fix port state after network down bcm_enetsw_probe did not properly reset port states, resulting in connected ports staying disabled after bringing up the interface the second time. SVN-Revision: 31881 --- diff --git a/target/linux/brcm63xx/patches-3.3/431-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch b/target/linux/brcm63xx/patches-3.3/431-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch new file mode 100644 index 0000000000..e1e048c093 --- /dev/null +++ b/target/linux/brcm63xx/patches-3.3/431-bcm63xx_enet-reset-port-link-state-in-bcm_enetsw_ope.patch @@ -0,0 +1,28 @@ +From 6d5c5bb13db3fd8e3dd0b82742b3957f41a4a3ac Mon Sep 17 00:00:00 2001 +From: Jonas Gorski +Date: Thu, 24 May 2012 20:38:58 +0200 +Subject: [PATCH] bcm63xx_enet: reset port link state in bcm_enetsw_open + +bcm_enetsw_open disables all ports, but does not reset their link state. +This results in connected ports staying disabled after a ifdown/ifup +cycle, since bcm_enetsw_phy_poll only enables them if their current state +is different from the stored link state. + +Fix this by also resetting the port link state. + +Signed-off-by: Jonas Gorski +--- + drivers/net/ethernet/broadcom/bcm63xx_enet.c | 2 ++ + 1 file changed, 2 insertions(+) + +--- a/drivers/net/ethernet/broadcom/bcm63xx_enet.c ++++ b/drivers/net/ethernet/broadcom/bcm63xx_enet.c +@@ -2214,6 +2214,8 @@ static int bcm_enetsw_open(struct net_de + enetsw_writeb(priv, ENETSW_PTCTRL_RXDIS_MASK | + ENETSW_PTCTRL_TXDIS_MASK, + ENETSW_PTCTRL_REG(i)); ++ ++ priv->sw_port_link[i] = 0; + } + + /* reset mib */