From: Heiko Schocher Date: Wed, 22 Sep 2010 12:06:33 +0000 (+0200) Subject: ARM: relocation: fix typo in comment X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a784c01adcefe3efd4e651c5230e6117a7be35f8;p=project%2Fbcm63xx%2Fu-boot.git ARM: relocation: fix typo in comment Signed-off-by: Heiko Schocher --- diff --git a/include/configs/imx27lite-common.h b/include/configs/imx27lite-common.h index 812e5f2e71..905a2923e8 100644 --- a/include/configs/imx27lite-common.h +++ b/include/configs/imx27lite-common.h @@ -235,7 +235,7 @@ "mtdids=" MTDIDS_DEFAULT "\0" \ "mtdparts=" MTDPARTS_DEFAULT "\0" \ -/* additions for new relocation code, must added to all boards */ +/* additions for new relocation code, must be added to all boards */ #undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \ diff --git a/include/configs/km_arm.h b/include/configs/km_arm.h index 8673e6ff64..faa0f50326 100644 --- a/include/configs/km_arm.h +++ b/include/configs/km_arm.h @@ -180,7 +180,7 @@ int get_scl (void); #undef CONFIG_JFFS2_CMDLINE #endif -/* additions for new relocation code, must added to all boards */ +/* additions for new relocation code, must be added to all boards */ #define CONFIG_SYS_SDRAM_BASE 0x00000000 #define CONFIG_SYS_INIT_SP_ADDR (0x00000000 + 0x1000 - /* Fix this */ \ CONFIG_SYS_GBL_DATA_SIZE) diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 2463be416e..21078cf864 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -340,7 +340,7 @@ extern unsigned int boot_flash_sec; extern unsigned int boot_flash_type; #endif -/* additions for new relocation code, must added to all boards */ +/* additions for new relocation code, must be added to all boards */ #undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR (LOW_LEVEL_SRAM_STACK - CONFIG_SYS_GBL_DATA_SIZE) diff --git a/include/configs/qong.h b/include/configs/qong.h index cbb53dd3d2..62ba7e0843 100644 --- a/include/configs/qong.h +++ b/include/configs/qong.h @@ -282,7 +282,7 @@ extern int qong_nand_rdy(void *chip); "mtdparts=physmap-flash.0:384k(U-Boot),128k(env1)," \ "128k(env2),2432k(kernel),13m(ramdisk),-(user)" -/* additions for new relocation code, must added to all boards */ +/* additions for new relocation code, must be added to all boards */ #undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */ #define CONFIG_SYS_SDRAM_BASE 0x80000000 #define CONFIG_SYS_INIT_RAM_ADDR IRAM_BASE_ADDR diff --git a/include/configs/tx25.h b/include/configs/tx25.h index c798570aec..7faa4538b2 100644 --- a/include/configs/tx25.h +++ b/include/configs/tx25.h @@ -176,7 +176,7 @@ "update=nand erase 0 40000;nand write ${loadaddr} 0 40000\0" \ "upd=run load update\0" \ -/* additions for new relocation code, must added to all boards */ +/* additions for new relocation code, must be added to all boards */ #undef CONFIG_SYS_ARM_WITHOUT_RELOC /* This board is tested with relocation support */ #define CONFIG_SYS_SDRAM_BASE PHYS_SDRAM_1 #define CONFIG_SYS_INIT_SP_ADDR (CONFIG_SYS_SDRAM_BASE + 0x1000 - /* Fix this */ \