From: Birger Koblitz <git@birger-koblitz.de>
Date: Mon, 10 Jan 2022 10:30:47 +0000 (+0100)
Subject: realtek: Adding RTL930X sub-target
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a75b9e3ecb61c00f026459d2d6a3e465f9346543;p=openwrt%2Fstaging%2Fthess.git

realtek: Adding RTL930X sub-target

This adds the RTL931X sub-target in the realtek target Makefile.

Signed-off-by: Birger Koblitz <git@birger-koblitz.de>
---

diff --git a/target/linux/realtek/Makefile b/target/linux/realtek/Makefile
index b9063eb73a..26b7d0afaa 100644
--- a/target/linux/realtek/Makefile
+++ b/target/linux/realtek/Makefile
@@ -7,7 +7,7 @@ BOARD:=realtek
 BOARDNAME:=Realtek MIPS
 DEVICE_TYPE:=basic
 FEATURES:=ramdisk squashfs
-SUBTARGETS:=rtl838x rtl839x
+SUBTARGETS:=rtl838x rtl839x rtl930x
 
 KERNEL_PATCHVER:=5.10
 
diff --git a/target/linux/realtek/dts-5.10/rtl930x.dtsi b/target/linux/realtek/dts-5.10/rtl930x.dtsi
index a4c9757505..ebacdde68f 100644
--- a/target/linux/realtek/dts-5.10/rtl930x.dtsi
+++ b/target/linux/realtek/dts-5.10/rtl930x.dtsi
@@ -2,51 +2,6 @@
 
 /dts-v1/;
 
-#define STRINGIZE(s) #s
-#define LAN_LABEL(p, s) STRINGIZE(p ## s)
-#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n)
-
-#define INTERNAL_PHY(n) \
-	phy##n: ethernet-phy@##n { \
-		reg = <##n>; \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-		phy-is-integrated; \
-	};
-
-#define EXTERNAL_PHY(n) \
-	phy##n: ethernet-phy@##n { \
-		reg = <##n>; \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-	};
-
-#define EXTERNAL_SFP_PHY(n) \
-	phy##n: ethernet-phy@##n { \
-		compatible = "ethernet-phy-ieee802.3-c22"; \
-		sfp; \
-		media = "fibre"; \
-		reg = <##n>; \
-	};
-
-#define SWITCH_PORT(n, s, m) \
-	port@##n { \
-		reg = <##n>; \
-		label = SWITCH_PORT_LABEL(s) ; \
-		phy-handle = <&phy##n>; \
-		phy-mode = #m ; \
-	};
-
-#define SWITCH_SFP_PORT(n, s, m) \
-	port@##n { \
-		reg = <##n>; \
-		label = SWITCH_PORT_LABEL(s) ; \
-		phy-handle = <&phy##n>; \
-		phy-mode = #m ; \
-		fixed-link { \
-			speed = <1000>; \
-			full-duplex; \
-		}; \
-	};
-
 / {
 	#address-cells = <1>;
 	#size-cells = <1>;
@@ -70,7 +25,7 @@
 	};
 
 	chosen {
-		bootargs = "console=ttyS0,115200";
+		bootargs = "console=ttyS0,38400";
 	};
 
 	cpuintc: cpuintc {
@@ -92,35 +47,24 @@
 		#size-cells = <1>;
 		ranges = <0x0 0x18000000 0x10000>;
 
-		intc: rtlintc@3000 {
-			compatible = "realtek,rtl-intc";
-			reg = <0x3000 0x20>;
-			#address-cells = <0>;
-			#interrupt-cells = <1>;
+		intc: interrupt-controller@3000 {
+			compatible = "realtek,rtl9300-intc", "realtek,rtl-intc";
+			reg = <0x3000 0x18>, <0x3018 0x18>;
 			interrupt-controller;
-			interrupt-map =
-				<31 &cpuintc 1>, /* UART1 */
-				<30 &cpuintc 2>, /* UART0 */
-				<28 &cpuintc 1>, /* USB_H2 */
-				<24 &cpuintc 4>, /* NIC */
-				<23 &cpuintc 3>, /* SWCORE */
-				<13 &cpuintc 4>, /* GPIO_ABCD */
-				<11 &cpuintc 1>, /* TC4 */
-				<10 &cpuintc 1>, /* TC3 */
-				<9 &cpuintc 1>,  /* TC2 */
-				<8 &cpuintc 1>,  /* TC1 */
-				<7 &cpuintc 5>,  /* TC0 */
-				<6 &cpuintc 5>,  /* WDT_IP2 */
-				<5 &cpuintc 4>;  /* WDT_IP1 */
+			#interrupt-cells = <2>;
+
+			interrupt-parent = <&cpuintc>;
+			interrupts = <2>, <3>, <4>, <5>, <6>, <7>;
 		};
 
-		timer: timer@3200 {
-			compatible = "realtek,rtl9300-timer";
-			reg = <0x3200 0x60>;
+		rtl9300clock: rtl9300clock@3200 {
+			compatible = "realtek,rtl9300clock";
+			reg = <0xb8003200 0x10>;
+			#address-cells = <0>;
+			#interrupt-cells = <1>;
+
 			interrupt-parent = <&intc>;
-			interrupts = <8>;
-			interrupt-names = "ostimer";
-			clocks = <&lx_clk>;
+			interrupts = <7 1>, <8 2>;
 		};
 
 		spi0: spi@1200 {
@@ -138,7 +82,7 @@
 			clocks = <&lx_clk>;
 
 			interrupt-parent = <&intc>;
-			interrupts = <30>;
+			interrupts = <30 1>;
 
 			reg-io-width = <1>;
 			reg-shift = <2>;
@@ -153,7 +97,7 @@
 			clocks = <&lx_clk>;
 
 			interrupt-parent = <&intc>;
-			interrupts = <31>;
+			interrupts = <31 0>;
 
 			reg-io-width = <1>;
 			reg-shift = <2>;
@@ -174,32 +118,32 @@
 
 			interrupt-parent = <&intc>;
 			interrupt-names = "phase1", "phase2";
-			interrupts = <5>, <6>;
+			interrupts = <5 4>, <6 4>;
 		};
 
-		gpio0: gpio-controller@3500 {
-			compatible = "realtek,rtl8380-gpio", "realtek,otto-gpio";
-			reg = <0x3500 0x20>;
+		gpio0: gpio-controller@3300 {
+			compatible = "realtek,rtl9300-gpio", "realtek,otto-gpio";
+			reg = <0x3300 0x1c>, <0x3338 0x8>;
+
 			gpio-controller;
 			#gpio-cells = <2>;
-			ngpios = <32>;
-			interrupt-parent = <&intc>;
-			interrupts = <31>;
+			ngpios = <24>;
 
-			/*
-			 * currently, RTL930x GPIO is not supported in
-			 * upstreamed driver (gpio-realtek-otto)
-			 */
-			status = "disabled";
+			interrupt-controller;
+			#interrupt-cells = <2>;
+			interrupt-parent = <&intc>;
+			interrupts = <13 1>;
 		};
+
 	};
 
 	ethernet0: ethernet@1b00a300 {
 		compatible = "realtek,rtl838x-eth";
 		reg = <0x1b00a300 0x100>;
+
 		interrupt-parent = <&intc>;
-		interrupts = <24>;
-		#interrupt-cells = <1>;
+		interrupts = <24 3>;
+
 		phy-mode = "internal";
 
 		fixed-link {
@@ -210,8 +154,9 @@
 
 	switch0: switch@1b000000 {
 		compatible = "realtek,rtl83xx-switch";
+		status = "okay";
 
 		interrupt-parent = <&intc>;
-		interrupts = <20>;
+		interrupts = <23 2>;
 	};
 };