From: John Crispin <john@openwrt.org>
Date: Sun, 17 Jul 2011 19:27:14 +0000 (+0000)
Subject: better lantiq support in madwifi
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a6ceecd9738671fbbf36b1a0508f449c446a8ed2;p=openwrt%2Fstaging%2Fansuel.git

better lantiq support in madwifi

Allow for each lantiq target (without wifi eeprom) to define where
wireless configuration data is on flash. Patch also adds support for
sx763 lantiq target.

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>

SVN-Revision: 27662
---

diff --git a/package/madwifi/patches/353-devid.patch b/package/madwifi/patches/353-devid.patch
index bcc214b8fd..ee149ff0c2 100644
--- a/package/madwifi/patches/353-devid.patch
+++ b/package/madwifi/patches/353-devid.patch
@@ -1,9 +1,10 @@
 --- a/ath/if_ath_pci.c
 +++ b/ath/if_ath_pci.c
-@@ -114,11 +114,13 @@ static struct pci_device_id ath_pci_id_t
+@@ -114,11 +114,15 @@ static struct pci_device_id ath_pci_id_t
  	{ 0x168c, 0x0023, PCI_ANY_ID, PCI_ANY_ID },
  	{ 0x168c, 0x0024, PCI_ANY_ID, PCI_ANY_ID },
  	{ 0x168c, 0x9013, PCI_ANY_ID, PCI_ANY_ID }, /* sonicwall */
++	{ 0x168c, 0xff16, PCI_ANY_ID, PCI_ANY_ID },
 +	{ 0x168c, 0xff1a, PCI_ANY_ID, PCI_ANY_ID },
  	{ 0 }
  };
@@ -11,6 +12,7 @@
  static u16 ath_devidmap[][2] = {
 -	{ 0x9013, 0x0013 }
 +	{ 0x9013, 0x0013 },
++	{ 0xff16, 0x0013 },
 +	{ 0xff1a, 0x001a }
  };
  
diff --git a/package/madwifi/patches/354-ifxmips_eeprom.patch b/package/madwifi/patches/354-ifxmips_eeprom.patch
index 134253466d..59036b1b4b 100644
--- a/package/madwifi/patches/354-ifxmips_eeprom.patch
+++ b/package/madwifi/patches/354-ifxmips_eeprom.patch
@@ -1,12 +1,13 @@
 --- a/ath_hal/ah_os.c
 +++ b/ath_hal/ah_os.c
-@@ -343,6 +343,45 @@
+@@ -343,6 +343,46 @@ EXPORT_SYMBOL(ath_hal_func);
   * NB: see the comments in ah_osdep.h about byte-swapping register
   *     reads and writes to understand what's going on below.
   */
 +
 +#ifdef CONFIG_LANTIQ
 +extern int lantiq_emulate_madwifi_eep;
++extern unsigned long long lantiq_madwifi_eep_addr;
 +#define EEPROM_EMULATION 1
 +#endif
 +
@@ -31,7 +32,7 @@
 +				val = 0x00000002;
 +			break;
 +		case 0x6004:
-+			val = cpu_to_le16(__raw_readw((u16 *) KSEG1ADDR(0xb07f0400 + addrsel)));
++			val = cpu_to_le16(__raw_readw((u16 *) KSEG1ADDR(lantiq_madwifi_eep_addr + addrsel)));
 +			/* this forces the regdomain to 0x00 (worldwide), as the original setting
 +			 * causes issues with the HAL */
 +			if (addrsel == 0x17e)
@@ -46,7 +47,7 @@
  void __ahdecl
  ath_hal_reg_write(struct ath_hal *ah, u_int reg, u_int32_t val)
  {
-@@ -351,20 +390,33 @@
+@@ -351,20 +391,33 @@ ath_hal_reg_write(struct ath_hal *ah, u_
  		ath_hal_printf(ah, "%s: WRITE 0x%x <= 0x%x\n", 
  				(ath_hal_func ?: "unknown"), reg, val);
  #endif
@@ -84,7 +85,7 @@
  				(ath_hal_func ?: "unknown"), reg, val);
  #endif
  	return val;
-@@ -581,7 +633,6 @@
+@@ -581,7 +634,6 @@ init_ath_hal(void)
  {
  	const char *sep;
  	int i;