From: Koen Vandeputte Date: Tue, 21 May 2024 12:49:14 +0000 (+0200) Subject: ath10k-ct: add Coverage Class setting ipq40xx and qca99xx WiFi (WIP) X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a695d8286be5b6d5b34b73add10d603282bb420f;p=openwrt%2Fstaging%2Fxback.git ath10k-ct: add Coverage Class setting ipq40xx and qca99xx WiFi (WIP) Since QCA wireless firmware version 10.4 the Coverage Class can be set for ipq40xx and qca99xx circuits via the wmi interface. A timeout value adjusts protocol timing for the extra radio propagation time that is inherent to transmission over larger than local distances. In due time an upstream patch in mac80211 can be anticipated. This patch enables use of ipq40xx SoC based devices in OpenWrt in the mean time when Coverage Class setting is required. Authors: Sebastian Gottschall William Wortel Signed-off-by: William Wortel Signed-off-by: Koen Vandeputte --- diff --git a/package/kernel/ath10k-ct/patches/999-ath10k-add-coverage-class-ipq40xx-qca99xx.patch b/package/kernel/ath10k-ct/patches/999-ath10k-add-coverage-class-ipq40xx-qca99xx.patch new file mode 100644 index 0000000000..3444bfee41 --- /dev/null +++ b/package/kernel/ath10k-ct/patches/999-ath10k-add-coverage-class-ipq40xx-qca99xx.patch @@ -0,0 +1,1048 @@ +--- a/ath10k-5.15/core.c ++++ b/ath10k-5.15/core.c +@@ -2970,7 +2970,7 @@ static void ath10k_core_set_coverage_cla + set_coverage_class_work); + + if (ar->hw_params.hw_ops->set_coverage_class) +- ar->hw_params.hw_ops->set_coverage_class(ar, -1); ++ ar->hw_params.hw_ops->set_coverage_class(ar, ar->fw_coverage.coverage_class); + } + + static int ath10k_core_init_firmware_features(struct ath10k *ar) +--- a/ath10k-5.15/hw.c ++++ b/ath10k-5.15/hw.c +@@ -584,6 +584,56 @@ void ath10k_hw_fill_survey_time(struct a + survey->time_busy = CCNT_TO_MSEC(ar, rcc); + } + ++/* Wireless firmware version 10.4 supports setting Coverage Class by +++ * setting via wmi tx_ack_timeout; chipsets a.o. ipq40xx, qca99xx +++*/ ++static void ath10k_hw_qca99xx_set_coverage_class(struct ath10k *ar, ++ s16 value) ++{ ++ u32 timeout; ++ int ret; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ /* Only execute if the core is started. */ ++ if ((ar->state != ATH10K_STATE_ON) && ++ (ar->state != ATH10K_STATE_RESTARTED)) { ++ ath10k_warn(ar, "ath10k core not yet started"); ++ goto unlock; ++ } ++ ++ if (value < 0) ++ value = ar->fw_coverage.coverage_class; ++ ++ /* WIP: it appears that one wmi timeout unit accounts for 3 C.Class units ++ * so we need an integer divide by three; feedback welcome for distances ++ * 10-20 km; tested at 7 km */ ++ if (value > 0) { ++ timeout = 0x40 + (value / 3) + 0x01; ++ ++ /* Limit to 0xff as the destination register is u8 */ ++ if (timeout > 0xff) ++ timeout = 0xff; ++ } ++ else ++ timeout = 0x40; ++ ++ /* set Coverage Class via wmi */ ++ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_ack_timeout, ++ timeout); ++ if (ret) { ++ ath10k_warn(ar, "failed to set tx-acktimeout: %d, timeout: 0x%x\n" ++ , ret, timeout); ++ } ++ ++unlock: ++ spin_lock_bh(&ar->data_lock); ++ ar->fw_coverage.coverage_class = value; ++ spin_unlock_bh(&ar->data_lock); ++ ++ mutex_unlock(&ar->conf_mutex); ++} ++ + /* The stock firmware does not support setting the coverage class. Instead this + * function monitors and modifies the corresponding MAC registers. + */ +@@ -1172,6 +1222,7 @@ static bool ath10k_qca99x0_rx_desc_msdu_ + } + + const struct ath10k_hw_ops qca99x0_ops = { ++ .set_coverage_class = ath10k_hw_qca99xx_set_coverage_class, + .rx_desc_get_l3_pad_bytes = ath10k_qca99x0_rx_desc_get_l3_pad_bytes, + .rx_desc_get_msdu_limit_error = ath10k_qca99x0_rx_desc_msdu_limit_error, + .is_rssi_enable = ath10k_htt_tx_rssi_enable, +--- a/ath10k-5.15/wmi.c ++++ b/ath10k-5.15/wmi.c +@@ -1164,6 +1164,7 @@ static struct wmi_pdev_param_map wmi_pde + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10x_pdev_param_map = { +@@ -1260,6 +1261,7 @@ static struct wmi_pdev_param_map wmi_10x + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = { +@@ -1357,6 +1359,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + /* firmware 10.2 specific mappings */ +@@ -1617,6 +1620,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_10_4_PDEV_PARAM_ARP_SRCADDR, + .arp_dstaddr = WMI_10_4_PDEV_PARAM_ARP_DSTADDR, + .enable_btcoex = WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ .tx_ack_timeout = WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT, + }; + + static const u8 wmi_key_cipher_suites[] = { +--- a/ath10k-5.15/wmi.h ++++ b/ath10k-5.15/wmi.h +@@ -3937,6 +3937,7 @@ struct wmi_pdev_param_map { + u32 rfkill_config; + u32 rfkill_enable; + u32 peer_stats_info_enable; ++ u32 tx_ack_timeout; + }; + + #define WMI_PDEV_PARAM_UNSUPPORTED 0 +@@ -4257,6 +4258,8 @@ enum wmi_10_4_pdev_param { + WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, + WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ /* TX acknowledge timeout. Advised range: 0x40 - 0xFF microsec. */ ++ WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT = 0x68, + }; + + struct wmi_pdev_set_param_cmd { +--- a/ath10k-5.17/core.c ++++ b/ath10k-5.17/core.c +@@ -3035,7 +3035,7 @@ static void ath10k_core_set_coverage_cla + set_coverage_class_work); + + if (ar->hw_params.hw_ops->set_coverage_class) +- ar->hw_params.hw_ops->set_coverage_class(ar, -1); ++ ar->hw_params.hw_ops->set_coverage_class(ar, ar->fw_coverage.coverage_class); + } + + static int ath10k_core_init_firmware_features(struct ath10k *ar) +--- a/ath10k-5.17/hw.c ++++ b/ath10k-5.17/hw.c +@@ -584,6 +584,56 @@ void ath10k_hw_fill_survey_time(struct a + survey->time_busy = CCNT_TO_MSEC(ar, rcc); + } + ++/* Wireless firmware version 10.4 supports setting Coverage Class by +++ * setting via wmi tx_ack_timeout; chipsets a.o. ipq40xx, qca99xx +++*/ ++static void ath10k_hw_qca99xx_set_coverage_class(struct ath10k *ar, ++ s16 value) ++{ ++ u32 timeout; ++ int ret; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ /* Only execute if the core is started. */ ++ if ((ar->state != ATH10K_STATE_ON) && ++ (ar->state != ATH10K_STATE_RESTARTED)) { ++ ath10k_warn(ar, "ath10k core not yet started"); ++ goto unlock; ++ } ++ ++ if (value < 0) ++ value = ar->fw_coverage.coverage_class; ++ ++ /* WIP: it appears that one wmi timeout unit accounts for 3 C.Class units ++ * so we need an integer divide by three; feedback welcome for distances ++ * 10-20 km; tested at 7 km */ ++ if (value > 0) { ++ timeout = 0x40 + (value / 3) + 0x01; ++ ++ /* Limit to 0xff as the destination register is u8 */ ++ if (timeout > 0xff) ++ timeout = 0xff; ++ } ++ else ++ timeout = 0x40; ++ ++ /* set Coverage Class via wmi */ ++ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_ack_timeout, ++ timeout); ++ if (ret) { ++ ath10k_warn(ar, "failed to set tx-acktimeout: %d, timeout: 0x%x\n" ++ , ret, timeout); ++ } ++ ++unlock: ++ spin_lock_bh(&ar->data_lock); ++ ar->fw_coverage.coverage_class = value; ++ spin_unlock_bh(&ar->data_lock); ++ ++ mutex_unlock(&ar->conf_mutex); ++} ++ + /* The stock firmware does not support setting the coverage class. Instead this + * function monitors and modifies the corresponding MAC registers. + */ +@@ -1172,6 +1222,7 @@ static bool ath10k_qca99x0_rx_desc_msdu_ + } + + const struct ath10k_hw_ops qca99x0_ops = { ++ .set_coverage_class = ath10k_hw_qca99xx_set_coverage_class, + .rx_desc_get_l3_pad_bytes = ath10k_qca99x0_rx_desc_get_l3_pad_bytes, + .rx_desc_get_msdu_limit_error = ath10k_qca99x0_rx_desc_msdu_limit_error, + .is_rssi_enable = ath10k_htt_tx_rssi_enable, +--- a/ath10k-5.17/wmi.c ++++ b/ath10k-5.17/wmi.c +@@ -1164,6 +1164,7 @@ static struct wmi_pdev_param_map wmi_pde + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10x_pdev_param_map = { +@@ -1260,6 +1261,7 @@ static struct wmi_pdev_param_map wmi_10x + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = { +@@ -1357,6 +1359,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + /* firmware 10.2 specific mappings */ +@@ -1617,6 +1620,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_10_4_PDEV_PARAM_ARP_SRCADDR, + .arp_dstaddr = WMI_10_4_PDEV_PARAM_ARP_DSTADDR, + .enable_btcoex = WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ .tx_ack_timeout = WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT, + }; + + static const u8 wmi_key_cipher_suites[] = { +--- a/ath10k-5.17/wmi.h ++++ b/ath10k-5.17/wmi.h +@@ -3939,6 +3939,7 @@ struct wmi_pdev_param_map { + u32 rfkill_config; + u32 rfkill_enable; + u32 peer_stats_info_enable; ++ u32 tx_ack_timeout; + }; + + #define WMI_PDEV_PARAM_UNSUPPORTED 0 +@@ -4259,6 +4260,8 @@ enum wmi_10_4_pdev_param { + WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, + WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ /* TX acknowledge timeout. Advised range: 0x40 - 0xFF microsec. */ ++ WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT = 0x68, + }; + + struct wmi_pdev_set_param_cmd { +--- a/ath10k-5.19/core.c ++++ b/ath10k-5.19/core.c +@@ -3091,7 +3091,7 @@ static void ath10k_core_set_coverage_cla + set_coverage_class_work); + + if (ar->hw_params.hw_ops->set_coverage_class) +- ar->hw_params.hw_ops->set_coverage_class(ar, -1); ++ ar->hw_params.hw_ops->set_coverage_class(ar, ar->fw_coverage.coverage_class); + } + + static int ath10k_core_init_firmware_features(struct ath10k *ar) +--- a/ath10k-5.19/hw.c ++++ b/ath10k-5.19/hw.c +@@ -585,6 +585,56 @@ void ath10k_hw_fill_survey_time(struct a + survey->time_busy = CCNT_TO_MSEC(ar, rcc); + } + ++/* Wireless firmware version 10.4 supports setting Coverage Class by +++ * setting via wmi tx_ack_timeout; chipsets a.o. ipq40xx, qca99xx +++*/ ++static void ath10k_hw_qca99xx_set_coverage_class(struct ath10k *ar, ++ s16 value) ++{ ++ u32 timeout; ++ int ret; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ /* Only execute if the core is started. */ ++ if ((ar->state != ATH10K_STATE_ON) && ++ (ar->state != ATH10K_STATE_RESTARTED)) { ++ ath10k_warn(ar, "ath10k core not yet started"); ++ goto unlock; ++ } ++ ++ if (value < 0) ++ value = ar->fw_coverage.coverage_class; ++ ++ /* WIP: it appears that one wmi timeout unit accounts for 3 C.Class units ++ * so we need an integer divide by three; feedback welcome for distances ++ * 10-20 km; tested at 7 km */ ++ if (value > 0) { ++ timeout = 0x40 + (value / 3) + 0x01; ++ ++ /* Limit to 0xff as the destination register is u8 */ ++ if (timeout > 0xff) ++ timeout = 0xff; ++ } ++ else ++ timeout = 0x40; ++ ++ /* set Coverage Class via wmi */ ++ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_ack_timeout, ++ timeout); ++ if (ret) { ++ ath10k_warn(ar, "failed to set tx-acktimeout: %d, timeout: 0x%x\n" ++ , ret, timeout); ++ } ++ ++unlock: ++ spin_lock_bh(&ar->data_lock); ++ ar->fw_coverage.coverage_class = value; ++ spin_unlock_bh(&ar->data_lock); ++ ++ mutex_unlock(&ar->conf_mutex); ++} ++ + /* The stock firmware does not support setting the coverage class. Instead this + * function monitors and modifies the corresponding MAC registers. + */ +@@ -1161,6 +1211,7 @@ const struct ath10k_hw_ops qca988x_ops = + }; + + const struct ath10k_hw_ops qca99x0_ops = { ++ .set_coverage_class = ath10k_hw_qca99xx_set_coverage_class, + .is_rssi_enable = ath10k_htt_tx_rssi_enable, + }; + +--- a/ath10k-5.19/wmi.c ++++ b/ath10k-5.19/wmi.c +@@ -1164,6 +1164,7 @@ static struct wmi_pdev_param_map wmi_pde + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10x_pdev_param_map = { +@@ -1260,6 +1261,7 @@ static struct wmi_pdev_param_map wmi_10x + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = { +@@ -1357,6 +1359,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + /* firmware 10.2 specific mappings */ +@@ -1617,6 +1620,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_10_4_PDEV_PARAM_ARP_SRCADDR, + .arp_dstaddr = WMI_10_4_PDEV_PARAM_ARP_DSTADDR, + .enable_btcoex = WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ .tx_ack_timeout = WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT, + }; + + static const u8 wmi_key_cipher_suites[] = { +--- a/ath10k-5.19/wmi.h ++++ b/ath10k-5.19/wmi.h +@@ -3939,6 +3939,7 @@ struct wmi_pdev_param_map { + u32 rfkill_config; + u32 rfkill_enable; + u32 peer_stats_info_enable; ++ u32 tx_ack_timeout; + }; + + #define WMI_PDEV_PARAM_UNSUPPORTED 0 +@@ -4259,6 +4260,8 @@ enum wmi_10_4_pdev_param { + WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, + WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ /* TX acknowledge timeout. Advised range: 0x40 - 0xFF microsec. */ ++ WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT = 0x68, + }; + + struct wmi_pdev_set_param_cmd { +--- a/ath10k-6.2/core.c ++++ b/ath10k-6.2/core.c +@@ -3110,7 +3110,7 @@ static void ath10k_core_set_coverage_cla + set_coverage_class_work); + + if (ar->hw_params.hw_ops->set_coverage_class) +- ar->hw_params.hw_ops->set_coverage_class(ar, -1); ++ ar->hw_params.hw_ops->set_coverage_class(ar, ar->fw_coverage.coverage_class); + } + + static int ath10k_core_init_firmware_features(struct ath10k *ar) +--- a/ath10k-6.2/hw.c ++++ b/ath10k-6.2/hw.c +@@ -585,6 +585,56 @@ void ath10k_hw_fill_survey_time(struct a + survey->time_busy = CCNT_TO_MSEC(ar, rcc); + } + ++/* Wireless firmware version 10.4 supports setting Coverage Class by +++ * setting via wmi tx_ack_timeout; chipsets a.o. ipq40xx, qca99xx +++*/ ++static void ath10k_hw_qca99xx_set_coverage_class(struct ath10k *ar, ++ s16 value) ++{ ++ u32 timeout; ++ int ret; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ /* Only execute if the core is started. */ ++ if ((ar->state != ATH10K_STATE_ON) && ++ (ar->state != ATH10K_STATE_RESTARTED)) { ++ ath10k_warn(ar, "ath10k core not yet started"); ++ goto unlock; ++ } ++ ++ if (value < 0) ++ value = ar->fw_coverage.coverage_class; ++ ++ /* WIP: it appears that one wmi timeout unit accounts for 3 C.Class units ++ * so we need an integer divide by three; feedback welcome for distances ++ * 10-20 km; tested at 7 km */ ++ if (value > 0) { ++ timeout = 0x40 + (value / 3) + 0x01; ++ ++ /* Limit to 0xff as the destination register is u8 */ ++ if (timeout > 0xff) ++ timeout = 0xff; ++ } ++ else ++ timeout = 0x40; ++ ++ /* set Coverage Class via wmi */ ++ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_ack_timeout, ++ timeout); ++ if (ret) { ++ ath10k_warn(ar, "failed to set tx-acktimeout: %d, timeout: 0x%x\n" ++ , ret, timeout); ++ } ++ ++unlock: ++ spin_lock_bh(&ar->data_lock); ++ ar->fw_coverage.coverage_class = value; ++ spin_unlock_bh(&ar->data_lock); ++ ++ mutex_unlock(&ar->conf_mutex); ++} ++ + /* The stock firmware does not support setting the coverage class. Instead this + * function monitors and modifies the corresponding MAC registers. + */ +@@ -1161,6 +1211,7 @@ const struct ath10k_hw_ops qca988x_ops = + }; + + const struct ath10k_hw_ops qca99x0_ops = { ++ .set_coverage_class = ath10k_hw_qca99xx_set_coverage_class, + .is_rssi_enable = ath10k_htt_tx_rssi_enable, + }; + +--- a/ath10k-6.2/wmi.c ++++ b/ath10k-6.2/wmi.c +@@ -1164,6 +1164,7 @@ static struct wmi_pdev_param_map wmi_pde + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10x_pdev_param_map = { +@@ -1260,6 +1261,7 @@ static struct wmi_pdev_param_map wmi_10x + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = { +@@ -1357,6 +1359,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + /* firmware 10.2 specific mappings */ +@@ -1617,6 +1620,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_10_4_PDEV_PARAM_ARP_SRCADDR, + .arp_dstaddr = WMI_10_4_PDEV_PARAM_ARP_DSTADDR, + .enable_btcoex = WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ .tx_ack_timeout = WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT, + }; + + static const u8 wmi_key_cipher_suites[] = { +--- a/ath10k-6.2/wmi.h ++++ b/ath10k-6.2/wmi.h +@@ -3939,6 +3939,7 @@ struct wmi_pdev_param_map { + u32 rfkill_config; + u32 rfkill_enable; + u32 peer_stats_info_enable; ++ u32 tx_ack_timeout; + }; + + #define WMI_PDEV_PARAM_UNSUPPORTED 0 +@@ -4259,6 +4260,8 @@ enum wmi_10_4_pdev_param { + WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, + WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ /* TX acknowledge timeout. Advised range: 0x40 - 0xFF microsec. */ ++ WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT = 0x68, + }; + + struct wmi_pdev_set_param_cmd { +--- a/ath10k-6.4/core.c ++++ b/ath10k-6.4/core.c +@@ -3110,7 +3110,7 @@ static void ath10k_core_set_coverage_cla + set_coverage_class_work); + + if (ar->hw_params.hw_ops->set_coverage_class) +- ar->hw_params.hw_ops->set_coverage_class(ar, -1); ++ ar->hw_params.hw_ops->set_coverage_class(ar, ar->fw_coverage.coverage_class); + } + + static int ath10k_core_init_firmware_features(struct ath10k *ar) +--- a/ath10k-6.4/hw.c ++++ b/ath10k-6.4/hw.c +@@ -585,6 +585,56 @@ void ath10k_hw_fill_survey_time(struct a + survey->time_busy = CCNT_TO_MSEC(ar, rcc); + } + ++/* Wireless firmware version 10.4 supports setting Coverage Class by +++ * setting via wmi tx_ack_timeout; chipsets a.o. ipq40xx, qca99xx +++*/ ++static void ath10k_hw_qca99xx_set_coverage_class(struct ath10k *ar, ++ s16 value) ++{ ++ u32 timeout; ++ int ret; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ /* Only execute if the core is started. */ ++ if ((ar->state != ATH10K_STATE_ON) && ++ (ar->state != ATH10K_STATE_RESTARTED)) { ++ ath10k_warn(ar, "ath10k core not yet started"); ++ goto unlock; ++ } ++ ++ if (value < 0) ++ value = ar->fw_coverage.coverage_class; ++ ++ /* WIP: it appears that one wmi timeout unit accounts for 3 C.Class units ++ * so we need an integer divide by three; feedback welcome for distances ++ * 10-20 km; tested at 7 km */ ++ if (value > 0) { ++ timeout = 0x40 + (value / 3) + 0x01; ++ ++ /* Limit to 0xff as the destination register is u8 */ ++ if (timeout > 0xff) ++ timeout = 0xff; ++ } ++ else ++ timeout = 0x40; ++ ++ /* set Coverage Class via wmi */ ++ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_ack_timeout, ++ timeout); ++ if (ret) { ++ ath10k_warn(ar, "failed to set tx-acktimeout: %d, timeout: 0x%x\n" ++ , ret, timeout); ++ } ++ ++unlock: ++ spin_lock_bh(&ar->data_lock); ++ ar->fw_coverage.coverage_class = value; ++ spin_unlock_bh(&ar->data_lock); ++ ++ mutex_unlock(&ar->conf_mutex); ++} ++ + /* The stock firmware does not support setting the coverage class. Instead this + * function monitors and modifies the corresponding MAC registers. + */ +@@ -1161,6 +1211,7 @@ const struct ath10k_hw_ops qca988x_ops = + }; + + const struct ath10k_hw_ops qca99x0_ops = { ++ .set_coverage_class = ath10k_hw_qca99xx_set_coverage_class, + .is_rssi_enable = ath10k_htt_tx_rssi_enable, + }; + +--- a/ath10k-6.4/wmi.c ++++ b/ath10k-6.4/wmi.c +@@ -1164,6 +1164,7 @@ static struct wmi_pdev_param_map wmi_pde + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10x_pdev_param_map = { +@@ -1260,6 +1261,7 @@ static struct wmi_pdev_param_map wmi_10x + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = { +@@ -1357,6 +1359,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + /* firmware 10.2 specific mappings */ +@@ -1617,6 +1620,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_10_4_PDEV_PARAM_ARP_SRCADDR, + .arp_dstaddr = WMI_10_4_PDEV_PARAM_ARP_DSTADDR, + .enable_btcoex = WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ .tx_ack_timeout = WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT, + }; + + static const u8 wmi_key_cipher_suites[] = { +--- a/ath10k-6.4/wmi.h ++++ b/ath10k-6.4/wmi.h +@@ -3939,6 +3939,7 @@ struct wmi_pdev_param_map { + u32 rfkill_config; + u32 rfkill_enable; + u32 peer_stats_info_enable; ++ u32 tx_ack_timeout; + }; + + #define WMI_PDEV_PARAM_UNSUPPORTED 0 +@@ -4259,6 +4260,8 @@ enum wmi_10_4_pdev_param { + WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, + WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ /* TX acknowledge timeout. Advised range: 0x40 - 0xFF microsec. */ ++ WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT = 0x68, + }; + + struct wmi_pdev_set_param_cmd { +--- a/ath10k-6.7/core.c ++++ b/ath10k-6.7/core.c +@@ -3101,7 +3101,7 @@ static void ath10k_core_set_coverage_cla + set_coverage_class_work); + + if (ar->hw_params.hw_ops->set_coverage_class) +- ar->hw_params.hw_ops->set_coverage_class(ar, -1); ++ ar->hw_params.hw_ops->set_coverage_class(ar, ar->fw_coverage.coverage_class); + } + + static int ath10k_core_init_firmware_features(struct ath10k *ar) +--- a/ath10k-6.7/hw.c ++++ b/ath10k-6.7/hw.c +@@ -585,6 +585,56 @@ void ath10k_hw_fill_survey_time(struct a + survey->time_busy = CCNT_TO_MSEC(ar, rcc); + } + ++/* Wireless firmware version 10.4 supports setting Coverage Class by +++ * setting via wmi tx_ack_timeout; chipsets a.o. ipq40xx, qca99xx +++*/ ++static void ath10k_hw_qca99xx_set_coverage_class(struct ath10k *ar, ++ s16 value) ++{ ++ u32 timeout; ++ int ret; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ /* Only execute if the core is started. */ ++ if ((ar->state != ATH10K_STATE_ON) && ++ (ar->state != ATH10K_STATE_RESTARTED)) { ++ ath10k_warn(ar, "ath10k core not yet started"); ++ goto unlock; ++ } ++ ++ if (value < 0) ++ value = ar->fw_coverage.coverage_class; ++ ++ /* WIP: it appears that one wmi timeout unit accounts for 3 C.Class units ++ * so we need an integer divide by three; feedback welcome for distances ++ * 10-20 km; tested at 7 km */ ++ if (value > 0) { ++ timeout = 0x40 + (value / 3) + 0x01; ++ ++ /* Limit to 0xff as the destination register is u8 */ ++ if (timeout > 0xff) ++ timeout = 0xff; ++ } ++ else ++ timeout = 0x40; ++ ++ /* set Coverage Class via wmi */ ++ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_ack_timeout, ++ timeout); ++ if (ret) { ++ ath10k_warn(ar, "failed to set tx-acktimeout: %d, timeout: 0x%x\n" ++ , ret, timeout); ++ } ++ ++unlock: ++ spin_lock_bh(&ar->data_lock); ++ ar->fw_coverage.coverage_class = value; ++ spin_unlock_bh(&ar->data_lock); ++ ++ mutex_unlock(&ar->conf_mutex); ++} ++ + /* The stock firmware does not support setting the coverage class. Instead this + * function monitors and modifies the corresponding MAC registers. + */ +@@ -1161,6 +1211,7 @@ const struct ath10k_hw_ops qca988x_ops = + }; + + const struct ath10k_hw_ops qca99x0_ops = { ++ .set_coverage_class = ath10k_hw_qca99xx_set_coverage_class, + .is_rssi_enable = ath10k_htt_tx_rssi_enable, + }; + +--- a/ath10k-6.7/wmi.c ++++ b/ath10k-6.7/wmi.c +@@ -1164,6 +1164,7 @@ static struct wmi_pdev_param_map wmi_pde + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10x_pdev_param_map = { +@@ -1260,6 +1261,7 @@ static struct wmi_pdev_param_map wmi_10x + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = { +@@ -1357,6 +1359,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + /* firmware 10.2 specific mappings */ +@@ -1617,6 +1620,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_10_4_PDEV_PARAM_ARP_SRCADDR, + .arp_dstaddr = WMI_10_4_PDEV_PARAM_ARP_DSTADDR, + .enable_btcoex = WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ .tx_ack_timeout = WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT, + }; + + static const u8 wmi_key_cipher_suites[] = { +--- a/ath10k-6.7/wmi.h ++++ b/ath10k-6.7/wmi.h +@@ -3939,6 +3939,7 @@ struct wmi_pdev_param_map { + u32 rfkill_config; + u32 rfkill_enable; + u32 peer_stats_info_enable; ++ u32 tx_ack_timeout; + }; + + #define WMI_PDEV_PARAM_UNSUPPORTED 0 +@@ -4259,6 +4260,8 @@ enum wmi_10_4_pdev_param { + WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, + WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ /* TX acknowledge timeout. Advised range: 0x40 - 0xFF microsec. */ ++ WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT = 0x68, + }; + + struct wmi_pdev_set_param_cmd { +--- a/ath10k-6.9/core.c ++++ b/ath10k-6.9/core.c +@@ -3121,7 +3121,7 @@ static void ath10k_core_set_coverage_cla + set_coverage_class_work); + + if (ar->hw_params.hw_ops->set_coverage_class) +- ar->hw_params.hw_ops->set_coverage_class(ar, -1); ++ ar->hw_params.hw_ops->set_coverage_class(ar, ar->fw_coverage.coverage_class); + } + + static int ath10k_core_init_firmware_features(struct ath10k *ar) +--- a/ath10k-6.9/hw.c ++++ b/ath10k-6.9/hw.c +@@ -586,6 +586,56 @@ void ath10k_hw_fill_survey_time(struct a + survey->time_busy = CCNT_TO_MSEC(ar, rcc); + } + ++/* Wireless firmware version 10.4 supports setting Coverage Class by +++ * setting via wmi tx_ack_timeout; chipsets a.o. ipq40xx, qca99xx +++*/ ++static void ath10k_hw_qca99xx_set_coverage_class(struct ath10k *ar, ++ s16 value) ++{ ++ u32 timeout; ++ int ret; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ /* Only execute if the core is started. */ ++ if ((ar->state != ATH10K_STATE_ON) && ++ (ar->state != ATH10K_STATE_RESTARTED)) { ++ ath10k_warn(ar, "ath10k core not yet started"); ++ goto unlock; ++ } ++ ++ if (value < 0) ++ value = ar->fw_coverage.coverage_class; ++ ++ /* WIP: it appears that one wmi timeout unit accounts for 3 C.Class units ++ * so we need an integer divide by three; feedback welcome for distances ++ * 10-20 km; tested at 7 km */ ++ if (value > 0) { ++ timeout = 0x40 + (value / 3) + 0x01; ++ ++ /* Limit to 0xff as the destination register is u8 */ ++ if (timeout > 0xff) ++ timeout = 0xff; ++ } ++ else ++ timeout = 0x40; ++ ++ /* set Coverage Class via wmi */ ++ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_ack_timeout, ++ timeout); ++ if (ret) { ++ ath10k_warn(ar, "failed to set tx-acktimeout: %d, timeout: 0x%x\n" ++ , ret, timeout); ++ } ++ ++unlock: ++ spin_lock_bh(&ar->data_lock); ++ ar->fw_coverage.coverage_class = value; ++ spin_unlock_bh(&ar->data_lock); ++ ++ mutex_unlock(&ar->conf_mutex); ++} ++ + /* The stock firmware does not support setting the coverage class. Instead this + * function monitors and modifies the corresponding MAC registers. + */ +@@ -1162,6 +1212,7 @@ const struct ath10k_hw_ops qca988x_ops = + }; + + const struct ath10k_hw_ops qca99x0_ops = { ++ .set_coverage_class = ath10k_hw_qca99xx_set_coverage_class, + .is_rssi_enable = ath10k_htt_tx_rssi_enable, + }; + +--- a/ath10k-6.9/wmi.c ++++ b/ath10k-6.9/wmi.c +@@ -1165,6 +1165,7 @@ static struct wmi_pdev_param_map wmi_pde + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10x_pdev_param_map = { +@@ -1261,6 +1262,7 @@ static struct wmi_pdev_param_map wmi_10x + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = { +@@ -1358,6 +1360,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + /* firmware 10.2 specific mappings */ +@@ -1618,6 +1621,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_10_4_PDEV_PARAM_ARP_SRCADDR, + .arp_dstaddr = WMI_10_4_PDEV_PARAM_ARP_DSTADDR, + .enable_btcoex = WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ .tx_ack_timeout = WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT, + }; + + static const u8 wmi_key_cipher_suites[] = { +--- a/ath10k-6.9/wmi.h ++++ b/ath10k-6.9/wmi.h +@@ -3939,6 +3939,7 @@ struct wmi_pdev_param_map { + u32 rfkill_config; + u32 rfkill_enable; + u32 peer_stats_info_enable; ++ u32 tx_ack_timeout; + }; + + #define WMI_PDEV_PARAM_UNSUPPORTED 0 +@@ -4259,6 +4260,8 @@ enum wmi_10_4_pdev_param { + WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, + WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ /* TX acknowledge timeout. Advised range: 0x40 - 0xFF microsec. */ ++ WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT = 0x68, + }; + + struct wmi_pdev_set_param_cmd { +--- a/ath10k-6.10/core.c ++++ b/ath10k-6.10/core.c +@@ -3120,7 +3120,7 @@ static void ath10k_core_set_coverage_cla + set_coverage_class_work); + + if (ar->hw_params.hw_ops->set_coverage_class) +- ar->hw_params.hw_ops->set_coverage_class(ar, -1); ++ ar->hw_params.hw_ops->set_coverage_class(ar, ar->fw_coverage.coverage_class); + } + + static int ath10k_core_init_firmware_features(struct ath10k *ar) +--- a/ath10k-6.10/hw.c ++++ b/ath10k-6.10/hw.c +@@ -586,6 +586,56 @@ void ath10k_hw_fill_survey_time(struct a + survey->time_busy = CCNT_TO_MSEC(ar, rcc); + } + ++/* Wireless firmware version 10.4 supports setting Coverage Class by +++ * setting via wmi tx_ack_timeout; chipsets a.o. ipq40xx, qca99xx +++*/ ++static void ath10k_hw_qca99xx_set_coverage_class(struct ath10k *ar, ++ s16 value) ++{ ++ u32 timeout; ++ int ret; ++ ++ mutex_lock(&ar->conf_mutex); ++ ++ /* Only execute if the core is started. */ ++ if ((ar->state != ATH10K_STATE_ON) && ++ (ar->state != ATH10K_STATE_RESTARTED)) { ++ ath10k_warn(ar, "ath10k core not yet started"); ++ goto unlock; ++ } ++ ++ if (value < 0) ++ value = ar->fw_coverage.coverage_class; ++ ++ /* WIP: it appears that one wmi timeout unit accounts for 3 C.Class units ++ * so we need an integer divide by three; feedback welcome for distances ++ * 10-20 km; tested at 7 km */ ++ if (value > 0) { ++ timeout = 0x40 + (value / 3) + 0x01; ++ ++ /* Limit to 0xff as the destination register is u8 */ ++ if (timeout > 0xff) ++ timeout = 0xff; ++ } ++ else ++ timeout = 0x40; ++ ++ /* set Coverage Class via wmi */ ++ ret = ath10k_wmi_pdev_set_param(ar, ar->wmi.pdev_param->tx_ack_timeout, ++ timeout); ++ if (ret) { ++ ath10k_warn(ar, "failed to set tx-acktimeout: %d, timeout: 0x%x\n" ++ , ret, timeout); ++ } ++ ++unlock: ++ spin_lock_bh(&ar->data_lock); ++ ar->fw_coverage.coverage_class = value; ++ spin_unlock_bh(&ar->data_lock); ++ ++ mutex_unlock(&ar->conf_mutex); ++} ++ + /* The stock firmware does not support setting the coverage class. Instead this + * function monitors and modifies the corresponding MAC registers. + */ +@@ -1162,6 +1212,7 @@ const struct ath10k_hw_ops qca988x_ops = + }; + + const struct ath10k_hw_ops qca99x0_ops = { ++ .set_coverage_class = ath10k_hw_qca99xx_set_coverage_class, + .is_rssi_enable = ath10k_htt_tx_rssi_enable, + }; + +--- a/ath10k-6.10/wmi.c ++++ b/ath10k-6.10/wmi.c +@@ -1165,6 +1165,7 @@ static struct wmi_pdev_param_map wmi_pde + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10x_pdev_param_map = { +@@ -1261,6 +1262,7 @@ static struct wmi_pdev_param_map wmi_10x + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + static struct wmi_pdev_param_map wmi_10_2_4_pdev_param_map = { +@@ -1358,6 +1360,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .arp_dstaddr = WMI_PDEV_PARAM_UNSUPPORTED, + .enable_btcoex = WMI_PDEV_PARAM_UNSUPPORTED, ++ .tx_ack_timeout = WMI_PDEV_PARAM_UNSUPPORTED, + }; + + /* firmware 10.2 specific mappings */ +@@ -1618,6 +1621,7 @@ static struct wmi_pdev_param_map wmi_10_ + .arp_srcaddr = WMI_10_4_PDEV_PARAM_ARP_SRCADDR, + .arp_dstaddr = WMI_10_4_PDEV_PARAM_ARP_DSTADDR, + .enable_btcoex = WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ .tx_ack_timeout = WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT, + }; + + static const u8 wmi_key_cipher_suites[] = { +--- a/ath10k-6.10/wmi.h ++++ b/ath10k-6.10/wmi.h +@@ -3974,6 +3974,7 @@ struct wmi_pdev_param_map { + u32 rfkill_config; + u32 rfkill_enable; + u32 peer_stats_info_enable; ++ u32 tx_ack_timeout; + }; + + #define WMI_PDEV_PARAM_UNSUPPORTED 0 +@@ -4294,6 +4295,8 @@ enum wmi_10_4_pdev_param { + WMI_10_4_PDEV_PARAM_ATF_DYNAMIC_ENABLE, + WMI_10_4_PDEV_PARAM_ATF_SSID_GROUP_POLICY, + WMI_10_4_PDEV_PARAM_ENABLE_BTCOEX, ++ /* TX acknowledge timeout. Advised range: 0x40 - 0xFF microsec. */ ++ WMI_10_4_PDEV_PARAM_TX_ACK_TIMEOUT = 0x68, + }; + + struct wmi_pdev_set_param_cmd {