From: Hauke Mehrtens Date: Sat, 20 Nov 2021 23:11:24 +0000 (+0100) Subject: iw: Update to version 5.16 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a5cc9e033ccad8b3808313159b661f4ae55448f4;p=openwrt%2Fstaging%2Fansuel.git iw: Update to version 5.16 Revert a commit to allow providing CFLAGS and LIBS from OpenWrt package Makefile. This downgrades the nl80211.h to kernel 5.15 and removes FILS_CRYPTO_OFFLOAD. This is needed to make it compatible with our patched mac80211 from kernel 5.15 Signed-off-by: Hauke Mehrtens --- diff --git a/package/network/utils/iw/Makefile b/package/network/utils/iw/Makefile index 8e11046189..da2b556416 100644 --- a/package/network/utils/iw/Makefile +++ b/package/network/utils/iw/Makefile @@ -8,13 +8,12 @@ include $(TOPDIR)/rules.mk PKG_NAME:=iw -PKG_VERSION:=5.9-8fab0c9e -PKG_RELEASE:=$(AUTORELEASE) - -PKG_SOURCE_PROTO:=git -PKG_SOURCE_URL:=https://git.kernel.org/pub/scm/linux/kernel/git/jberg/iw.git -PKG_SOURCE_VERSION:=8fab0c9ee9db217587a58efcc37421c86edcb638 -PKG_MIRROR_HASH:=797b322bc03952f3127ae0a7da476c14ada1bbe9a9ae234a56dd6f864c568e16 +PKG_VERSION:=5.16 +PKG_RELEASE:=1 + +PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.xz +PKG_SOURCE_URL:=@KERNEL/software/network/iw +PKG_HASH:=4c44e42762f903f9094ba5a598998c800a97a62afd6fd31ec1e0a799e308659c PKG_MAINTAINER:=Felix Fietkau PKG_LICENSE:=GPL-2.0 diff --git a/package/network/utils/iw/patches/001-nl80211_h_sync.patch b/package/network/utils/iw/patches/001-nl80211_h_sync.patch index f788e6915f..6d81dd0da1 100644 --- a/package/network/utils/iw/patches/001-nl80211_h_sync.patch +++ b/package/network/utils/iw/patches/001-nl80211_h_sync.patch @@ -1,375 +1,203 @@ --- a/nl80211.h +++ b/nl80211.h -@@ -11,7 +11,7 @@ - * Copyright 2008 Jouni Malinen - * Copyright 2008 Colin McCabe - * Copyright 2015-2017 Intel Deutschland GmbH -- * Copyright (C) 2018-2020 Intel Corporation -+ * Copyright (C) 2018-2021 Intel Corporation - * - * Permission to use, copy, modify, and/or distribute this software for any - * purpose with or without fee is hereby granted, provided that the above -@@ -655,6 +655,9 @@ - * When a security association was established on an 802.1X network using - * fast transition, this event should be followed by an - * %NL80211_CMD_PORT_AUTHORIZED event. -+ * Following a %NL80211_CMD_ROAM event userspace can issue -+ * %NL80211_CMD_GET_SCAN in order to obtain the scan information for the -+ * new BSS the card/driver roamed to. - * @NL80211_CMD_DISCONNECT: drop a given connection; also used to notify - * userspace that a connection was dropped by the AP or due to other - * reasons, for this the %NL80211_ATTR_DISCONNECTED_BY_AP and -@@ -757,7 +760,8 @@ - * of any other interfaces, and other interfaces will again take - * precedence when they are used. +@@ -301,29 +301,6 @@ + */ + + /** +- * DOC: FILS shared key crypto offload +- * +- * This feature is applicable to drivers running in AP mode. +- * +- * FILS shared key crypto offload can be advertised by drivers by setting +- * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD flag. The drivers that support +- * FILS shared key crypto offload should be able to encrypt and decrypt +- * association frames for FILS shared key authentication as per IEEE 802.11ai. +- * With this capability, for FILS key derivation, drivers depend on userspace. +- * +- * After FILS key derivation, userspace shares the FILS AAD details with the +- * driver and the driver stores the same to use in decryption of association +- * request and in encryption of association response. The below parameters +- * should be given to the driver in %NL80211_CMD_SET_FILS_AAD. +- * %NL80211_ATTR_MAC - STA MAC address, used for storing FILS AAD per STA +- * %NL80211_ATTR_FILS_KEK - Used for encryption or decryption +- * %NL80211_ATTR_FILS_NONCES - Used for encryption or decryption +- * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) +- * +- * Once the association is done, the driver cleans the FILS AAD data. +- */ +- +-/** + * enum nl80211_commands - supported nl80211 commands * -- * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface. -+ * @NL80211_CMD_SET_WDS_PEER: Set the MAC address of the peer on a WDS interface -+ * (no longer supported). + * @NL80211_CMD_UNSPEC: unspecified command to catch errors +@@ -360,10 +337,7 @@ + * @NL80211_CMD_DEL_INTERFACE: Virtual interface was deleted, has attributes + * %NL80211_ATTR_IFINDEX and %NL80211_ATTR_WIPHY. Can also be sent from + * userspace to request deletion of a virtual interface, then requires +- * attribute %NL80211_ATTR_IFINDEX. If multiple BSSID advertisements are +- * enabled using %NL80211_ATTR_MBSSID_CONFIG, %NL80211_ATTR_MBSSID_ELEMS, +- * and if this command is used for the transmitting interface, then all +- * the non-transmitting interfaces are deleted as well. ++ * attribute %NL80211_ATTR_IFINDEX. * - * @NL80211_CMD_SET_MULTICAST_TO_UNICAST: Configure if this AP should perform - * multicast to unicast conversion. When enabled, all multicast packets -@@ -1177,6 +1181,25 @@ - * includes the contents of the frame. %NL80211_ATTR_ACK flag is included - * if the recipient acknowledged the frame. + * @NL80211_CMD_GET_KEY: Get sequence counter information for a key specified + * by %NL80211_ATTR_KEY_IDX and/or %NL80211_ATTR_MAC. +@@ -1226,12 +1200,6 @@ + * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change + * has completed * -+ * @NL80211_CMD_SET_SAR_SPECS: SAR power limitation configuration is -+ * passed using %NL80211_ATTR_SAR_SPEC. %NL80211_ATTR_WIPHY is used to -+ * specify the wiphy index to be applied to. -+ * -+ * @NL80211_CMD_OBSS_COLOR_COLLISION: This notification is sent out whenever -+ * mac80211/drv detects a bss color collision. -+ * -+ * @NL80211_CMD_COLOR_CHANGE_REQUEST: This command is used to indicate that -+ * userspace wants to change the BSS color. -+ * -+ * @NL80211_CMD_COLOR_CHANGE_STARTED: Notify userland, that a color change has -+ * started -+ * -+ * @NL80211_CMD_COLOR_CHANGE_ABORTED: Notify userland, that the color change has -+ * been aborted -+ * -+ * @NL80211_CMD_COLOR_CHANGE_COMPLETED: Notify userland that the color change -+ * has completed -+ * +- * @NL80211_CMD_SET_FILS_AAD: Set FILS AAD data to the driver using - +- * &NL80211_ATTR_MAC - for STA MAC address +- * &NL80211_ATTR_FILS_KEK - for KEK +- * &NL80211_ATTR_FILS_NONCES - for FILS Nonces +- * (STA Nonce 16 bytes followed by AP Nonce 16 bytes) +- * * @NL80211_CMD_MAX: highest used command number * @__NL80211_CMD_AFTER_LAST: internal use */ -@@ -1407,6 +1430,16 @@ enum nl80211_commands { +@@ -1472,8 +1440,6 @@ enum nl80211_commands { + NL80211_CMD_COLOR_CHANGE_ABORTED, + NL80211_CMD_COLOR_CHANGE_COMPLETED, - NL80211_CMD_CONTROL_PORT_FRAME_TX_STATUS, - -+ NL80211_CMD_SET_SAR_SPECS, -+ -+ NL80211_CMD_OBSS_COLOR_COLLISION, -+ -+ NL80211_CMD_COLOR_CHANGE_REQUEST, -+ -+ NL80211_CMD_COLOR_CHANGE_STARTED, -+ NL80211_CMD_COLOR_CHANGE_ABORTED, -+ NL80211_CMD_COLOR_CHANGE_COMPLETED, -+ +- NL80211_CMD_SET_FILS_AAD, +- /* add new commands above here */ /* used to define NL80211_CMD_MAX below */ -@@ -1750,8 +1783,9 @@ enum nl80211_commands { - * specify just a single bitrate, which is to be used for the beacon. - * The driver must also specify support for this with the extended - * features NL80211_EXT_FEATURE_BEACON_RATE_LEGACY, -- * NL80211_EXT_FEATURE_BEACON_RATE_HT and -- * NL80211_EXT_FEATURE_BEACON_RATE_VHT. -+ * NL80211_EXT_FEATURE_BEACON_RATE_HT, -+ * NL80211_EXT_FEATURE_BEACON_RATE_VHT and -+ * NL80211_EXT_FEATURE_BEACON_RATE_HE. - * - * @NL80211_ATTR_FRAME_MATCH: A binary attribute which typically must contain - * at least one byte, currently used with @NL80211_CMD_REGISTER_FRAME. -@@ -1955,8 +1989,15 @@ enum nl80211_commands { - * @NL80211_ATTR_PROBE_RESP: Probe Response template data. Contains the entire - * probe-response frame. The DA field in the 802.11 header is zero-ed out, - * to be filled by the FW. -- * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable -- * this feature. Currently, only supported in mac80211 drivers. -+ * @NL80211_ATTR_DISABLE_HT: Force HT capable interfaces to disable -+ * this feature during association. This is a flag attribute. -+ * Currently only supported in mac80211 drivers. -+ * @NL80211_ATTR_DISABLE_VHT: Force VHT capable interfaces to disable -+ * this feature during association. This is a flag attribute. -+ * Currently only supported in mac80211 drivers. -+ * @NL80211_ATTR_DISABLE_HE: Force HE capable interfaces to disable -+ * this feature during association. This is a flag attribute. -+ * Currently only supported in mac80211 drivers. - * @NL80211_ATTR_HT_CAPABILITY_MASK: Specify which bits of the - * ATTR_HT_CAPABILITY to which attention should be paid. - * Currently, only mac80211 NICs support this feature. -@@ -2077,7 +2118,8 @@ enum nl80211_commands { - * until the channel switch event. - * @NL80211_ATTR_CH_SWITCH_BLOCK_TX: flag attribute specifying that transmission - * must be blocked on the current channel (before the channel switch -- * operation). -+ * operation). Also included in the channel switch started event if quiet -+ * was requested by the AP. - * @NL80211_ATTR_CSA_IES: Nested set of attributes containing the IE information - * for the time while performing a channel switch. - * @NL80211_ATTR_CNTDWN_OFFS_BEACON: An array of offsets (u16) to the channel -@@ -2527,6 +2569,33 @@ enum nl80211_commands { - * override mask. Used with NL80211_ATTR_S1G_CAPABILITY in - * NL80211_CMD_ASSOCIATE or NL80211_CMD_CONNECT. +@@ -2627,17 +2593,8 @@ enum nl80211_commands { + * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE + * information for the time while performing a color switch. * -+ * @NL80211_ATTR_SAE_PWE: Indicates the mechanism(s) allowed for SAE PWE -+ * derivation in WPA3-Personal networks which are using SAE authentication. -+ * This is a u8 attribute that encapsulates one of the values from -+ * &enum nl80211_sae_pwe_mechanism. -+ * -+ * @NL80211_ATTR_SAR_SPEC: SAR power limitation specification when -+ * used with %NL80211_CMD_SET_SAR_SPECS. The message contains fields -+ * of %nl80211_sar_attrs which specifies the sar type and related -+ * sar specs. Sar specs contains array of %nl80211_sar_specs_attrs. -+ * -+ * @NL80211_ATTR_RECONNECT_REQUESTED: flag attribute, used with deauth and -+ * disassoc events to indicate that an immediate reconnect to the AP -+ * is desired. -+ * -+ * @NL80211_ATTR_OBSS_COLOR_BITMAP: bitmap of the u64 BSS colors for the -+ * %NL80211_CMD_OBSS_COLOR_COLLISION event. -+ * -+ * @NL80211_ATTR_COLOR_CHANGE_COUNT: u8 attribute specifying the number of TBTT's -+ * until the color switch event. -+ * @NL80211_ATTR_COLOR_CHANGE_COLOR: u8 attribute specifying the color that we are -+ * switching to -+ * @NL80211_ATTR_COLOR_CHANGE_ELEMS: Nested set of attributes containing the IE -+ * information for the time while performing a color switch. -+ * +- * @NL80211_ATTR_MBSSID_CONFIG: Nested attribute for multiple BSSID +- * advertisements (MBSSID) parameters in AP mode. +- * Kernel uses this attribute to indicate the driver's support for MBSSID +- * and enhanced multi-BSSID advertisements (EMA AP) to the userspace. +- * Userspace should use this attribute to configure per interface MBSSID +- * parameters. +- * See &enum nl80211_mbssid_config_attributes for details. +- * +- * @NL80211_ATTR_MBSSID_ELEMS: Nested parameter to pass multiple BSSID elements. +- * Mandatory parameter for the transmitting interface to enable MBSSID. +- * Optional for the non-transmitting interfaces. + * @NL80211_ATTR_WIPHY_ANTENNA_GAIN: Configured antenna gain. Used to reduce + * transmit power to stay within regulatory limits. u32, dBi. -+ * + * * @NUM_NL80211_ATTR: total number of nl80211_attrs available * @NL80211_ATTR_MAX: highest attribute number currently defined - * @__NL80211_ATTR_AFTER_LAST: internal use -@@ -3016,6 +3085,22 @@ enum nl80211_attrs { - NL80211_ATTR_S1G_CAPABILITY, - NL80211_ATTR_S1G_CAPABILITY_MASK, +@@ -3142,8 +3099,7 @@ enum nl80211_attrs { + NL80211_ATTR_COLOR_CHANGE_COLOR, + NL80211_ATTR_COLOR_CHANGE_ELEMS, -+ NL80211_ATTR_SAE_PWE, -+ -+ NL80211_ATTR_RECONNECT_REQUESTED, -+ -+ NL80211_ATTR_SAR_SPEC, -+ -+ NL80211_ATTR_DISABLE_HE, -+ -+ NL80211_ATTR_OBSS_COLOR_BITMAP, -+ -+ NL80211_ATTR_COLOR_CHANGE_COUNT, -+ NL80211_ATTR_COLOR_CHANGE_COLOR, -+ NL80211_ATTR_COLOR_CHANGE_ELEMS, -+ +- NL80211_ATTR_MBSSID_CONFIG, +- NL80211_ATTR_MBSSID_ELEMS, + NL80211_ATTR_WIPHY_ANTENNA_GAIN, -+ + /* add attributes here, update the policy in nl80211.c */ - __NL80211_ATTR_AFTER_LAST, -@@ -3613,6 +3698,8 @@ enum nl80211_mpath_info { - * defined - * @NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA: HE 6GHz band capabilities (__le16), - * given for all 6 GHz band channels -+ * @NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS: vendor element capabilities that are -+ * advertised on this band/for this iftype (binary) - * @__NL80211_BAND_IFTYPE_ATTR_AFTER_LAST: internal use +@@ -4978,7 +4934,6 @@ enum nl80211_txrate_gi { + * @NL80211_BAND_60GHZ: around 60 GHz band (58.32 - 69.12 GHz) + * @NL80211_BAND_6GHZ: around 6 GHz band (5.9 - 7.2 GHz) + * @NL80211_BAND_S1GHZ: around 900MHz, supported by S1G PHYs +- * @NL80211_BAND_LC: light communication band (placeholder) + * @NUM_NL80211_BANDS: number of bands, avoid using this in userspace + * since newer kernel versions may support more bands */ - enum nl80211_band_iftype_attr { -@@ -3624,6 +3711,7 @@ enum nl80211_band_iftype_attr { - NL80211_BAND_IFTYPE_ATTR_HE_CAP_MCS_SET, - NL80211_BAND_IFTYPE_ATTR_HE_CAP_PPE, - NL80211_BAND_IFTYPE_ATTR_HE_6GHZ_CAPA, -+ NL80211_BAND_IFTYPE_ATTR_VENDOR_ELEMS, +@@ -4988,7 +4943,6 @@ enum nl80211_band { + NL80211_BAND_60GHZ, + NL80211_BAND_6GHZ, + NL80211_BAND_S1GHZ, +- NL80211_BAND_LC, - /* keep last */ - __NL80211_BAND_IFTYPE_ATTR_AFTER_LAST, -@@ -5896,6 +5984,22 @@ enum nl80211_feature_flags { - * @NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP: Driver/device supports - * unsolicited broadcast probe response transmission + NUM_NL80211_BANDS, + }; +@@ -6046,11 +6000,6 @@ enum nl80211_feature_flags { + * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision + * detection and change announcemnts. * -+ * @NL80211_EXT_FEATURE_BEACON_RATE_HE: Driver supports beacon rate -+ * configuration (AP/mesh) with HE rates. -+ * -+ * @NL80211_EXT_FEATURE_SECURE_LTF: Device supports secure LTF measurement -+ * exchange protocol. -+ * -+ * @NL80211_EXT_FEATURE_SECURE_RTT: Device supports secure RTT measurement -+ * exchange protocol. -+ * -+ * @NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE: Device supports management -+ * frame protection for all management frames exchanged during the -+ * negotiation and range measurement procedure. -+ * -+ * @NL80211_EXT_FEATURE_BSS_COLOR: The driver supports BSS color collision -+ * detection and change announcemnts. -+ * +- * @NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD: Driver running in AP mode supports +- * FILS encryption and decryption for (Re)Association Request and Response +- * frames. Userspace has to share FILS AAD details to the driver by using +- * @NL80211_CMD_SET_FILS_AAD. +- * * @NUM_NL80211_EXT_FEATURES: number of extended features. * @MAX_NL80211_EXT_FEATURES: highest extended feature index. */ -@@ -5956,6 +6060,11 @@ enum nl80211_ext_feature_index { - NL80211_EXT_FEATURE_SAE_OFFLOAD_AP, - NL80211_EXT_FEATURE_FILS_DISCOVERY, - NL80211_EXT_FEATURE_UNSOL_BCAST_PROBE_RESP, -+ NL80211_EXT_FEATURE_BEACON_RATE_HE, -+ NL80211_EXT_FEATURE_SECURE_LTF, -+ NL80211_EXT_FEATURE_SECURE_RTT, -+ NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, -+ NL80211_EXT_FEATURE_BSS_COLOR, +@@ -6116,7 +6065,6 @@ enum nl80211_ext_feature_index { + NL80211_EXT_FEATURE_SECURE_RTT, + NL80211_EXT_FEATURE_PROT_RANGE_NEGO_AND_MEASURE, + NL80211_EXT_FEATURE_BSS_COLOR, +- NL80211_EXT_FEATURE_FILS_CRYPTO_OFFLOAD, /* add new features before the definition below */ NUM_NL80211_EXT_FEATURES, -@@ -6253,11 +6362,13 @@ struct nl80211_vendor_cmd_info { - * @NL80211_TDLS_PEER_HT: TDLS peer is HT capable. - * @NL80211_TDLS_PEER_VHT: TDLS peer is VHT capable. - * @NL80211_TDLS_PEER_WMM: TDLS peer is WMM capable. -+ * @NL80211_TDLS_PEER_HE: TDLS peer is HE capable. - */ - enum nl80211_tdls_peer_capability { - NL80211_TDLS_PEER_HT = 1<<0, - NL80211_TDLS_PEER_VHT = 1<<1, - NL80211_TDLS_PEER_WMM = 1<<2, -+ NL80211_TDLS_PEER_HE = 1<<3, +@@ -7406,60 +7354,4 @@ enum nl80211_sar_specs_attrs { + NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, }; - /** -@@ -6849,6 +6960,12 @@ enum nl80211_peer_measurement_ftm_capa { - * if neither %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED nor - * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set, EDCA based - * ranging will be used. -+ * @NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK: negotiate for LMR feedback. Only -+ * valid if either %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED or -+ * %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED is set. -+ * @NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR: optional. The BSS color of the -+ * responder. Only valid if %NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED -+ * or %NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED is set. - * - * @NUM_NL80211_PMSR_FTM_REQ_ATTR: internal - * @NL80211_PMSR_FTM_REQ_ATTR_MAX: highest attribute number -@@ -6867,6 +6984,8 @@ enum nl80211_peer_measurement_ftm_req { - NL80211_PMSR_FTM_REQ_ATTR_REQUEST_CIVICLOC, - NL80211_PMSR_FTM_REQ_ATTR_TRIGGER_BASED, - NL80211_PMSR_FTM_REQ_ATTR_NON_TRIGGER_BASED, -+ NL80211_PMSR_FTM_REQ_ATTR_LMR_FEEDBACK, -+ NL80211_PMSR_FTM_REQ_ATTR_BSS_COLOR, - - /* keep last */ - NUM_NL80211_PMSR_FTM_REQ_ATTR, -@@ -7124,4 +7243,115 @@ enum nl80211_unsol_bcast_probe_resp_attr - NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_MAX = - __NL80211_UNSOL_BCAST_PROBE_RESP_ATTR_LAST - 1 - }; -+ -+/** -+ * enum nl80211_sae_pwe_mechanism - The mechanism(s) allowed for SAE PWE -+ * derivation. Applicable only when WPA3-Personal SAE authentication is -+ * used. -+ * -+ * @NL80211_SAE_PWE_UNSPECIFIED: not specified, used internally to indicate that -+ * attribute is not present from userspace. -+ * @NL80211_SAE_PWE_HUNT_AND_PECK: hunting-and-pecking loop only -+ * @NL80211_SAE_PWE_HASH_TO_ELEMENT: hash-to-element only -+ * @NL80211_SAE_PWE_BOTH: both hunting-and-pecking loop and hash-to-element -+ * can be used. -+ */ -+enum nl80211_sae_pwe_mechanism { -+ NL80211_SAE_PWE_UNSPECIFIED, -+ NL80211_SAE_PWE_HUNT_AND_PECK, -+ NL80211_SAE_PWE_HASH_TO_ELEMENT, -+ NL80211_SAE_PWE_BOTH, -+}; -+ -+/** -+ * enum nl80211_sar_type - type of SAR specs -+ * -+ * @NL80211_SAR_TYPE_POWER: power limitation specified in 0.25dBm unit -+ * -+ */ -+enum nl80211_sar_type { -+ NL80211_SAR_TYPE_POWER, -+ -+ /* add new type here */ -+ -+ /* Keep last */ -+ NUM_NL80211_SAR_TYPE, -+}; -+ -+/** -+ * enum nl80211_sar_attrs - Attributes for SAR spec -+ * -+ * @NL80211_SAR_ATTR_TYPE: the SAR type as defined in &enum nl80211_sar_type. -+ * -+ * @NL80211_SAR_ATTR_SPECS: Nested array of SAR power -+ * limit specifications. Each specification contains a set -+ * of %nl80211_sar_specs_attrs. -+ * -+ * For SET operation, it contains array of %NL80211_SAR_ATTR_SPECS_POWER -+ * and %NL80211_SAR_ATTR_SPECS_RANGE_INDEX. -+ * -+ * For sar_capa dump, it contains array of -+ * %NL80211_SAR_ATTR_SPECS_START_FREQ -+ * and %NL80211_SAR_ATTR_SPECS_END_FREQ. -+ * -+ * @__NL80211_SAR_ATTR_LAST: Internal -+ * @NL80211_SAR_ATTR_MAX: highest sar attribute -+ * -+ * These attributes are used with %NL80211_CMD_SET_SAR_SPEC -+ */ -+enum nl80211_sar_attrs { -+ __NL80211_SAR_ATTR_INVALID, -+ -+ NL80211_SAR_ATTR_TYPE, -+ NL80211_SAR_ATTR_SPECS, -+ -+ __NL80211_SAR_ATTR_LAST, -+ NL80211_SAR_ATTR_MAX = __NL80211_SAR_ATTR_LAST - 1, -+}; -+ -+/** -+ * enum nl80211_sar_specs_attrs - Attributes for SAR power limit specs -+ * -+ * @NL80211_SAR_ATTR_SPECS_POWER: Required (s32)value to specify the actual -+ * power limit value in units of 0.25 dBm if type is -+ * NL80211_SAR_TYPE_POWER. (i.e., a value of 44 represents 11 dBm). -+ * 0 means userspace doesn't have SAR limitation on this associated range. -+ * -+ * @NL80211_SAR_ATTR_SPECS_RANGE_INDEX: Required (u32) value to specify the -+ * index of exported freq range table and the associated power limitation -+ * is applied to this range. -+ * -+ * Userspace isn't required to set all the ranges advertised by WLAN driver, -+ * and userspace can skip some certain ranges. These skipped ranges don't -+ * have SAR limitations, and they are same as setting the -+ * %NL80211_SAR_ATTR_SPECS_POWER to any unreasonable high value because any -+ * value higher than regulatory allowed value just means SAR power -+ * limitation is removed, but it's required to set at least one range. -+ * It's not allowed to set duplicated range in one SET operation. -+ * -+ * Every SET operation overwrites previous SET operation. -+ * -+ * @NL80211_SAR_ATTR_SPECS_START_FREQ: Required (u32) value to specify the start -+ * frequency of this range edge when registering SAR capability to wiphy. -+ * It's not a channel center frequency. The unit is kHz. -+ * -+ * @NL80211_SAR_ATTR_SPECS_END_FREQ: Required (u32) value to specify the end -+ * frequency of this range edge when registering SAR capability to wiphy. -+ * It's not a channel center frequency. The unit is kHz. -+ * -+ * @__NL80211_SAR_ATTR_SPECS_LAST: Internal -+ * @NL80211_SAR_ATTR_SPECS_MAX: highest sar specs attribute -+ */ -+enum nl80211_sar_specs_attrs { -+ __NL80211_SAR_ATTR_SPECS_INVALID, -+ -+ NL80211_SAR_ATTR_SPECS_POWER, -+ NL80211_SAR_ATTR_SPECS_RANGE_INDEX, -+ NL80211_SAR_ATTR_SPECS_START_FREQ, -+ NL80211_SAR_ATTR_SPECS_END_FREQ, -+ -+ __NL80211_SAR_ATTR_SPECS_LAST, -+ NL80211_SAR_ATTR_SPECS_MAX = __NL80211_SAR_ATTR_SPECS_LAST - 1, -+}; -+ +-/** +- * enum nl80211_mbssid_config_attributes - multiple BSSID (MBSSID) and enhanced +- * multi-BSSID advertisements (EMA) in AP mode. +- * Kernel uses some of these attributes to advertise driver's support for +- * MBSSID and EMA. +- * Remaining attributes should be used by the userspace to configure the +- * features. +- * +- * @__NL80211_MBSSID_CONFIG_ATTR_INVALID: Invalid +- * +- * @NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES: Used by the kernel to advertise +- * the maximum number of MBSSID interfaces supported by the driver. +- * Driver should indicate MBSSID support by setting +- * wiphy->mbssid_max_interfaces to a value more than or equal to 2. +- * +- * @NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY: Used by the kernel +- * to advertise the maximum profile periodicity supported by the driver +- * if EMA is enabled. Driver should indicate EMA support to the userspace +- * by setting wiphy->ema_max_profile_periodicity to +- * a non-zero value. +- * +- * @NL80211_MBSSID_CONFIG_ATTR_INDEX: Mandatory parameter to pass the index of +- * this BSS (u8) in the multiple BSSID set. +- * Value must be set to 0 for the transmitting interface and non-zero for +- * all non-transmitting interfaces. The userspace will be responsible +- * for using unique indices for the interfaces. +- * Range: 0 to wiphy->mbssid_max_interfaces-1. +- * +- * @NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX: Mandatory parameter for +- * a non-transmitted profile which provides the interface index (u32) of +- * the transmitted profile. The value must match one of the interface +- * indices advertised by the kernel. Optional if the interface being set up +- * is the transmitting one, however, if provided then the value must match +- * the interface index of the same. +- * +- * @NL80211_MBSSID_CONFIG_ATTR_EMA: Flag used to enable EMA AP feature. +- * Setting this flag is permitted only if the driver advertises EMA support +- * by setting wiphy->ema_max_profile_periodicity to non-zero. +- * +- * @__NL80211_MBSSID_CONFIG_ATTR_LAST: Internal +- * @NL80211_MBSSID_CONFIG_ATTR_MAX: highest attribute +- */ +-enum nl80211_mbssid_config_attributes { +- __NL80211_MBSSID_CONFIG_ATTR_INVALID, +- +- NL80211_MBSSID_CONFIG_ATTR_MAX_INTERFACES, +- NL80211_MBSSID_CONFIG_ATTR_MAX_EMA_PROFILE_PERIODICITY, +- NL80211_MBSSID_CONFIG_ATTR_INDEX, +- NL80211_MBSSID_CONFIG_ATTR_TX_IFINDEX, +- NL80211_MBSSID_CONFIG_ATTR_EMA, +- +- /* keep last */ +- __NL80211_MBSSID_CONFIG_ATTR_LAST, +- NL80211_MBSSID_CONFIG_ATTR_MAX = __NL80211_MBSSID_CONFIG_ATTR_LAST - 1, +-}; +- #endif /* __LINUX_NL80211_H */ +--- a/info.c ++++ b/info.c +@@ -701,7 +701,6 @@ broken_combination: + ext_feat_print(tb, OPERATING_CHANNEL_VALIDATION, "Operating Channel Validation (OCV) support"); + ext_feat_print(tb, 4WAY_HANDSHAKE_AP_PSK, "AP mode PSK offload support"); + ext_feat_print(tb, BSS_COLOR, "BSS coloring support"); +- ext_feat_print(tb, FILS_CRYPTO_OFFLOAD, "FILS crypto offload"); + } + + if (tb_msg[NL80211_ATTR_COALESCE_RULE]) { diff --git a/package/network/utils/iw/patches/010-Revert-iw-allow-specifying-CFLAGS-LIBS-externally.patch b/package/network/utils/iw/patches/010-Revert-iw-allow-specifying-CFLAGS-LIBS-externally.patch new file mode 100644 index 0000000000..1254efa9c7 --- /dev/null +++ b/package/network/utils/iw/patches/010-Revert-iw-allow-specifying-CFLAGS-LIBS-externally.patch @@ -0,0 +1,68 @@ +From 1f3706d10812d70adefe32fe0d7d3a3ec25374f0 Mon Sep 17 00:00:00 2001 +From: Hauke Mehrtens +Date: Sun, 21 Nov 2021 00:02:57 +0100 +Subject: Revert "iw: allow specifying CFLAGS/LIBS externally" + +This reverts commit 1325244b77d56fd7a16d1e35fdae0efc151920b1. + +The OpenWrt build system provides the CFLAGS and LIBS names from the +package Makefile to overwrite them for libnl-tiny. This is not possible +after this upstream change which we revert here any more + +Signed-off-by: Hauke Mehrtens +--- + Makefile | 20 ++++++++++---------- + 1 file changed, 10 insertions(+), 10 deletions(-) + +--- a/Makefile ++++ b/Makefile +@@ -45,30 +45,30 @@ NLLIBNAME = libnl-1 + endif + + ifeq ($(NL2FOUND),Y) +-override CFLAGS += -DCONFIG_LIBNL20 +-override LIBS += -lnl-genl ++CFLAGS += -DCONFIG_LIBNL20 ++LIBS += -lnl-genl + NLLIBNAME = libnl-2.0 + endif + + ifeq ($(NL3xFOUND),Y) + # libnl 3.2 might be found as 3.2 and 3.0 + NL3FOUND = N +-override CFLAGS += -DCONFIG_LIBNL30 +-override LIBS += -lnl-genl-3 ++CFLAGS += -DCONFIG_LIBNL30 ++LIBS += -lnl-genl-3 + NLLIBNAME = libnl-3.0 + endif + + ifeq ($(NL3FOUND),Y) +-override CFLAGS += -DCONFIG_LIBNL30 +-override LIBS += -lnl-genl ++CFLAGS += -DCONFIG_LIBNL30 ++LIBS += -lnl-genl + NLLIBNAME = libnl-3.0 + endif + + # nl-3.1 has a broken libnl-gnl-3.1.pc file + # as show by pkg-config --debug --libs --cflags --exact-version=3.1 libnl-genl-3.1;echo $? + ifeq ($(NL31FOUND),Y) +-override CFLAGS += -DCONFIG_LIBNL30 +-override LIBS += -lnl-genl ++CFLAGS += -DCONFIG_LIBNL30 ++LIBS += -lnl-genl + NLLIBNAME = libnl-3.1 + endif + +@@ -76,8 +76,8 @@ ifeq ($(NLLIBNAME),) + $(error Cannot find development files for any supported version of libnl) + endif + +-override LIBS += $(shell $(PKG_CONFIG) --libs $(NLLIBNAME)) +-override CFLAGS += $(shell $(PKG_CONFIG) --cflags $(NLLIBNAME)) ++LIBS += $(shell $(PKG_CONFIG) --libs $(NLLIBNAME)) ++CFLAGS += $(shell $(PKG_CONFIG) --cflags $(NLLIBNAME)) + endif # NO_PKG_CONFIG + + ifeq ($(V),1) diff --git a/package/network/utils/iw/patches/200-reduce_size.patch b/package/network/utils/iw/patches/200-reduce_size.patch index c50a4a4d38..d0e837c695 100644 --- a/package/network/utils/iw/patches/200-reduce_size.patch +++ b/package/network/utils/iw/patches/200-reduce_size.patch @@ -38,7 +38,7 @@ --- a/info.c +++ b/info.c -@@ -216,6 +216,7 @@ next: +@@ -215,6 +215,7 @@ next: } } @@ -46,7 +46,7 @@ if (tb_band[NL80211_BAND_ATTR_RATES]) { printf("\t\tBitrates (non-HT):\n"); nla_for_each_nested(nl_rate, tb_band[NL80211_BAND_ATTR_RATES], rem_rate) { -@@ -232,6 +233,7 @@ next: +@@ -231,6 +232,7 @@ next: printf("\n"); } } @@ -54,7 +54,7 @@ } } -@@ -297,6 +299,7 @@ next: +@@ -296,6 +298,7 @@ next: printf("\tCoverage class: %d (up to %dm)\n", coverage, 450 * coverage); } @@ -62,7 +62,7 @@ if (tb_msg[NL80211_ATTR_CIPHER_SUITES]) { int num = nla_len(tb_msg[NL80211_ATTR_CIPHER_SUITES]) / sizeof(__u32); int i; -@@ -308,6 +311,7 @@ next: +@@ -307,6 +310,7 @@ next: cipher_name(ciphers[i])); } } @@ -70,21 +70,19 @@ if (tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_TX] && tb_msg[NL80211_ATTR_WIPHY_ANTENNA_AVAIL_RX]) -@@ -327,11 +331,13 @@ next: - printf("\t\t * %s\n", iftype_name(nla_type(nl_mode))); - } +@@ -324,9 +328,11 @@ next: + print_iftype_list("\tSupported interface modes", "\t\t", + tb_msg[NL80211_ATTR_SUPPORTED_IFTYPES]); +#ifdef IW_FULL - if (tb_msg[NL80211_ATTR_SOFTWARE_IFTYPES]) { - printf("\tsoftware interface modes (can always be added):\n"); - nla_for_each_nested(nl_mode, tb_msg[NL80211_ATTR_SOFTWARE_IFTYPES], rem_mode) - printf("\t\t * %s\n", iftype_name(nla_type(nl_mode))); - } + if (tb_msg[NL80211_ATTR_SOFTWARE_IFTYPES]) + print_iftype_list("\tsoftware interface modes (can always be added)", + "\t\t", tb_msg[NL80211_ATTR_SOFTWARE_IFTYPES]); +#endif if (tb_msg[NL80211_ATTR_INTERFACE_COMBINATIONS]) { struct nlattr *nl_combi; -@@ -428,6 +434,7 @@ broken_combination: +@@ -416,6 +422,7 @@ broken_combination: printf("\tinterface combinations are not supported\n"); } @@ -92,7 +90,7 @@ if (tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS]) { printf("\tSupported commands:\n"); nla_for_each_nested(nl_cmd, tb_msg[NL80211_ATTR_SUPPORTED_COMMANDS], rem_cmd) -@@ -525,6 +532,7 @@ broken_combination: +@@ -513,6 +520,7 @@ broken_combination: printf("\t\t * wake up on TCP connection\n"); } } @@ -100,7 +98,7 @@ if (tb_msg[NL80211_ATTR_ROAM_SUPPORT]) printf("\tDevice supports roaming.\n"); -@@ -563,6 +571,7 @@ broken_combination: +@@ -551,6 +559,7 @@ broken_combination: } } @@ -108,7 +106,7 @@ if (tb_msg[NL80211_ATTR_FEATURE_FLAGS]) { unsigned int features = nla_get_u32(tb_msg[NL80211_ATTR_FEATURE_FLAGS]); -@@ -627,6 +636,7 @@ broken_combination: +@@ -615,6 +624,7 @@ broken_combination: if (features & NL80211_FEATURE_ND_RANDOM_MAC_ADDR) printf("\tDevice supports randomizing MAC-addr in net-detect scans.\n"); } @@ -116,7 +114,7 @@ if (tb_msg[NL80211_ATTR_TDLS_SUPPORT]) printf("\tDevice supports T-DLS.\n"); -@@ -762,6 +772,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP +@@ -751,6 +761,7 @@ TOPLEVEL(list, NULL, NL80211_CMD_GET_WIP "List all wireless devices and their capabilities."); TOPLEVEL(phy, NULL, NL80211_CMD_GET_WIPHY, NLM_F_DUMP, CIB_NONE, handle_info, NULL); @@ -124,7 +122,7 @@ static int handle_commands(struct nl80211_state *state, struct nl_msg *msg, int argc, char **argv, enum id_input id) { -@@ -773,6 +784,7 @@ static int handle_commands(struct nl8021 +@@ -762,6 +773,7 @@ static int handle_commands(struct nl8021 } TOPLEVEL(commands, NULL, NL80211_CMD_GET_WIPHY, 0, CIB_NONE, handle_commands, "list all known commands and their decimal & hex value");