From: Florian Fainelli <florian@openwrt.org>
Date: Thu, 27 Jan 2011 21:49:56 +0000 (+0000)
Subject: clean up mach-adm8668 includes
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a5adea5c2a9450805ecf9433cb2784fc6c5a8279;p=openwrt%2Fstaging%2Fblocktrron.git

clean up mach-adm8668 includes

This patch cleans up the include directory, as they were from vendors
2.4 GPL source. Now only what's used is there.

Signed-off-by: Scott Nicholas <scott.nicholas@scottn.us>

SVN-Revision: 25175
---

diff --git a/target/linux/adm8668/files/arch/mips/adm8668/platform.c b/target/linux/adm8668/files/arch/mips/adm8668/platform.c
index e97ad6ab2d..4de38fd38f 100644
--- a/target/linux/adm8668/files/arch/mips/adm8668/platform.c
+++ b/target/linux/adm8668/files/arch/mips/adm8668/platform.c
@@ -85,9 +85,9 @@ static void adm8668_restart(char *cmd)
 	int i;
 
 	/* stop eth0 and eth1 */
-	ADM8668_LAN_REG(NETCSR6) = BIT_1|BIT_13;
+	ADM8668_LAN_REG(NETCSR6) = (1 << 13) | (1 << 1);
 	ADM8668_LAN_REG(NETCSR7) = 0;
-	ADM8668_WAN_REG(NETCSR6) = BIT_1|BIT_13;
+	ADM8668_WAN_REG(NETCSR6) = (1 << 13) | (1 << 1);
 	ADM8668_WAN_REG(NETCSR7) = 0;
 
 	/* reset PHY */
@@ -105,7 +105,7 @@ static void adm8668_restart(char *cmd)
 	/* the real deal */
 	for (i = 0; i < 1000; i++)
 		;
-	ADM8668_CONFIG_REG(ADM8668_CR1) = BIT_0;
+	ADM8668_CONFIG_REG(ADM8668_CR1) = 1;
 }
 
 int __devinit adm8668_devs_register(void)
diff --git a/target/linux/adm8668/files/arch/mips/adm8668/prom.c b/target/linux/adm8668/files/arch/mips/adm8668/prom.c
index 53731c1b10..7187f29825 100644
--- a/target/linux/adm8668/files/arch/mips/adm8668/prom.c
+++ b/target/linux/adm8668/files/arch/mips/adm8668/prom.c
@@ -96,7 +96,7 @@ void __init prom_setup_cmdline(void)
 		prom_argv[i] = (char *)KSEG0ADDR(prom_argv[i]);
 
 		/* default bootargs has "console=/dev/ttyS0" yet console won't
-		 * show up at all if you do this ... */
+		 * show up at all if you include the '/dev/' nowadays ... */
 		if (match_tag(prom_argv[i], "console=/dev/")) {
 			char *ptr = prom_argv[i] + strlen("console=/dev/");
 
@@ -128,7 +128,6 @@ void __init prom_init(void)
 
 	memsize = bd->bi_memsize;
 	printk("Board info:\n");
-	printk("  Board ID: %#lx\n", bd->bi_arch_number);
 	printk("  RAM size: %d MB\n", (int)memsize/(1024*1024));
 	printk("  NOR start: %#lx\n", bd->bi_flashstart);
 	printk("  NOR size: %#lx\n", bd->bi_flashsize);
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
index 7898ccf938..2cf65d81a6 100644
--- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
@@ -9,20 +9,7 @@
 #ifndef  __ADM8668_H__
 #define  __ADM8668_H__
 
-#include <asm/addrspace.h>
-#include "bsp_sup.h"
-
-#define MEM_KSEG0_BASE		0x80000000
-#define MEM_KSEG1_BASE		0xA0000000
-#define MEM_SEG_MASK		0xE0000000
-#define KVA2PA(_addr)		((unsigned long)(_addr) & ~MEM_SEG_MASK)
-
-#define MIPS_KSEG0A(_addr)	(KVA2PA(_addr) | MEM_KSEG0_BASE)
-#define MIPS_KSEG1A(_addr)	(KVA2PA(_addr) | MEM_KSEG1_BASE)
-
-#define PA2VA(_addr)		(KVA2PA(_addr) | MEM_KSEG1_BASE)
-#define PA2CACHEVA(_addr)	(KVA2PA(_addr) | MEM_KSEG0_BASE)
-
+#define SYS_CLOCK		175000000
 
 /*=======================  Physical Memory Map  ============================*/
 #define ADM8668_SDRAM_BASE	0
@@ -37,115 +24,45 @@
 #define ADM8668_TMR_BASE	0x1E200000
 #define ADM8668_UART0_BASE	0x1E400000
 #define ADM8668_SMEM0_BASE	0x1FC00000
-#define ADM8668_NAND_BASE	0x1fffff00
+#define ADM8668_NAND_BASE	0x1FFFFF00
 
 #define PCICFG_BASE		0x12200000
 #define PCIDAT_BASE		0x12400000
 
-/* for PCI bridge fixup ! */
-#define PCI_BRIDGE_MASK		0x40
-
-/* WLAN registers */
-#define WCSR0			0x00
-#define WCSR11A			0x5c
-
-#define GPIO_REG		WCSR11A
-
-#define ADM8668_WLAN_REG(_reg)		\
-	(*((volatile unsigned int *)(PA2VA(ADM8668_WLAN_BASE + (_reg)))))
+/** onboard uart **/
+#define ADM8668_UARTCLK_FREQ	62500000
+/* registers */
+#define UART_DR_REG		0x00
+#define UART_RSR_REG		0x04
+#define UART_CR_REG		0x14
+#define UART_FR_REG		0x18
+#define UART_IIR_REG		0x1C
 
-/* configuration registers */
-#define ADM8668_CR0		0x00
-#define ADM8668_CR1		0x04
-#define ADM8668_CR2		0x08
-#define ADM8668_CR3		0x0C
-#define ADM8668_CR8		0x20
-#define ADM8668_CR10		0x28
-#define ADM8668_CR11		0x2C
-#define ADM8668_CR12		0x30
-#define ADM8668_CR13		0x34
-#define ADM8668_CR14		0x38
-#define ADM8668_CR15		0x3C
-#define ADM8668_CR16		0x40
-#define ADM8668_CR17		0x44
-#define ADM8668_CR18		0x48
-#define ADM8668_CR19		0x4C
-#define ADM8668_CR20		0x50
-#define ADM8668_CR21		0x54
-#define ADM8668_CR22		0x58
-#define ADM8668_CR23		0x5C
-#define ADM8668_CR24		0x60
-#define ADM8668_CR25		0x64
-#define ADM8668_CR26		0x68
-#define ADM8668_CR27		0x6C
-#define ADM8668_CR28		0x70
-#define ADM8668_CR29		0x74
-#define ADM8668_CR30		0x78
-#define ADM8668_CR31		0x7C
-#define ADM8668_CR32		0x80
-#define ADM8668_CR33		0x84
-#define ADM8668_CR34		0x88
-#define ADM8668_CR35		0x8C
-#define ADM8668_CR36		0x90
-#define ADM8668_CR37		0x94
-#define ADM8668_CR38		0x98
-#define ADM8668_CR39		0x9C
-#define ADM8668_CR40		0xA0
-#define ADM8668_CR41		0xA4
-#define ADM8668_CR42		0xA8
-#define ADM8668_CR43		0xAC
-#define ADM8668_CR44		0xB0
-#define ADM8668_CR45		0xB4
-#define ADM8668_CR46		0xB8
-#define ADM8668_CR47		0xBC
-#define ADM8668_CR48		0xC0
-#define ADM8668_CR49		0xC4
-#define ADM8668_CR50		0xC8
-#define ADM8668_CR51		0xCC
-#define ADM8668_CR52		0xD0
-#define ADM8668_CR53		0xD4
-#define ADM8668_CR54		0xD8
-#define ADM8668_CR55		0xDC
-#define ADM8668_CR56		0xE0
-#define ADM8668_CR57		0xE4
-#define ADM8668_CR58		0xE8
-#define ADM8668_CR59		0xEC
-#define ADM8668_CR60		0xF0
-#define ADM8668_CR61		0xF4
-#define ADM8668_CR62		0xF8
-#define ADM8668_CR63		0xFC
-#define ADM8668_CR64		0x100
-#define ADM8668_CR65		0x104
-#define ADM8668_CR66		0x108
-#define ADM8668_CR67		0x10C
-#define ADM8668_CR68		0x110
+/* rsr reg */
+#define UART_FRAMING_ERR	0x01
+#define UART_PARITY_ERR		0x02
+#define UART_BREAK_ERR		0x04
+#define UART_OVERRUN_ERR	0x08
+#define UART_RX_STATUS_MASK	0x0F
 
-#define CRGPIO_REG		ADM8668_CR8
+/* cr reg */
+#define UART_RX_INT_EN		0x10
+#define UART_TX_INT_EN		0x20
+#define UART_RX_TIMEOUT_INT_EN	0x40
 
-#define ADM8668_CONFIG_REG(_reg)		\
-	(*((volatile unsigned int *)(PA2VA(ADM8668_CONFIG_BASE + (_reg)))))
-#define ADM8668_MPMC_REG(_reg)		\
-	(*((volatile unsigned int *)(PA2VA(ADM8668_MPMC_BASE + (_reg)))))
+/* fr reg */
+#define UART_RX_FIFO_EMPTY	0x10
+#define UART_TX_FIFO_FULL	0x20
 
+/* iir reg */
+#define UART_RX_INT		0x02
+#define UART_TX_INT		0x04
+#define UART_RX_TIMEOUT_INT	0x08
 
-/*==========================  Interrupt Controller ==========================*/
-/* registers offset */
+/* interrupt controller */
 #define IRQ_STATUS_REG		0x00	/* Read */
-#define IRQ_RAW_STATUS_REG	0x04	/* Read */
 #define IRQ_ENABLE_REG		0x08	/* Read/Write */
 #define IRQ_DISABLE_REG		0x0C	/* Write */
-#define IRQ_SOFT_REG		0x10	/* Write */
-
-#define FIQ_STATUS_REG		0x100	/* Read */
-#define FIQ_RAW_STATUS_REG	0x104
-#define FIQ_ENABLE_REG		0x108
-#define FIQ_DISABLE_REG		0x10c
-
-
-/*  Macro for accessing Interrupt controller register  */
-#define ADM8668_INTC_REG(_reg)		\
-	(*((volatile unsigned long *)(PA2VA(ADM8668_INTC_BASE + (_reg)))))
-
 
 /* interrupt levels */
 #define INT_LVL_SWI		1
@@ -165,146 +82,31 @@
 #define INT_LVL_USB		15
 #define INT_LVL_MAX		INT_LVL_USB
 
-#define IRQ_MASK		0xffff
-
-#define IRQ_SWI			(0x1<<INT_LVL_SWI)
-#define IRQ_TIMERINT0		(0x1<<INT_LVL_TIMERINT0)
-#define IRQ_TIMERINT1		(0x1<<INT_LVL_TIMERINT1)
-#define IRQ_UART0		(0x1<<INT_LVL_UART0)
-#define IRQ_LAN			(0x1<<INT_LVL_LAN)
-#define IRQ_WAN			(0x1<<INT_LVL_WAN)
-#define IRQ_WLAN		(0x1<<INT_LVL_WLAN)
-#define IRQ_GPIO		(0x1<<INT_LVL_GPIO)
-#define IRQ_IDEINT		(0x1<<INT_LVL_IDE)
-#define IRQ_PCI2		(0x1<<INT_LVL_PCI2)
-#define IRQ_PCI1		(0x1<<INT_LVL_PCI1)
-#define IRQ_PCI0		(0x1<<INT_LVL_PCI0)
-#define IRQ_USB			(0x1<<INT_LVL_USB)
-
-
-/*===========================  UART Control Register ========================*/
-#define UART_DR_REG		0x00
-#define UART_RSR_REG		0x04
-#define UART_ECR_REG		0x04
-#define UART_LCR_H_REG		0x08
-#define UART_LCR_M_REG		0x0c
-#define UART_LCR_L_REG		0x10
-#define UART_CR_REG		0x14
-#define UART_FR_REG		0x18
-#define UART_IIR_REG		0x1c
-#define UART_ICR_REG		0x1C
-#define UART_ILPR_REG		0x20
-
-/*  rsr/ecr reg  */
-#define UART_OVERRUN_ERR	0x08
-#define UART_BREAK_ERR		0x04
-#define UART_PARITY_ERR		0x02
-#define UART_FRAMING_ERR	0x01
-#define UART_RX_STATUS_MASK	0x0f
-#define UART_RX_ERROR		( UART_BREAK_ERR	\
-				| UART_PARITY_ERR	\
-				| UART_FRAMING_ERR)
-
-/*  lcr_h reg  */
-#define UART_SEND_BREAK		0x01
-#define UART_PARITY_EN		0x02
-#define UART_EVEN_PARITY	0x04
-#define UART_TWO_STOP_BITS	0x08
-#define UART_ENABLE_FIFO	0x10
-
-#define UART_WLEN_5BITS		0x00
-#define UART_WLEN_6BITS		0x20
-#define UART_WLEN_7BITS		0x40
-#define UART_WLEN_8BITS		0x60
-#define UART_WLEN_MASK		0x60
-
-/*  cr reg  */
-#define UART_PORT_EN			0x01
-#define UART_SIREN			0x02
-#define UART_SIRLP			0x04
-#define UART_MODEM_STATUS_INT_EN	0x08
-#define UART_RX_INT_EN			0x10
-#define UART_TX_INT_EN			0x20
-#define UART_RX_TIMEOUT_INT_EN		0x40
-#define UART_LOOPBACK_EN		0x80
-
-/*  fr reg  */
-#define UART_CTS		0x01
-#define UART_DSR		0x02
-#define UART_DCD		0x04
-#define UART_BUSY		0x08
-#define UART_RX_FIFO_EMPTY	0x10
-#define UART_TX_FIFO_FULL	0x20
-#define UART_RX_FIFO_FULL	0x40
-#define UART_TX_FIFO_EMPTY	0x80
-
-/*  iir/icr reg  */
-#define UART_MODEM_STATUS_INT	0x01
-#define UART_RX_INT		0x02
-#define UART_TX_INT		0x04
-#define UART_RX_TIMEOUT_INT	0x08
-
-#define UART_INT_MASK		0x0f
-
-#ifdef _FPGA_
-#define ADM8668_UARTCLK_FREQ	3686400
-#else
-#define ADM8668_UARTCLK_FREQ	62500000
-#endif
-
-#define UART_BAUDDIV(_rate)				\
-	((unsigned long)(ADM8668_UARTCLK_FREQ/(16*(_rate)) - 1))
-
-/*  uart_baudrate  */
-#define UART_230400bps_DIVISOR	UART_BAUDDIV(230400)
-#define UART_115200bps_DIVISOR	UART_BAUDDIV(115200)
-#define UART_76800bps_DIVISOR	UART_BAUDDIV(76800)
-#define UART_57600bps_DIVISOR	UART_BAUDDIV(57600)
-#define UART_38400bps_DIVISOR	UART_BAUDDIV(38400)
-#define UART_19200bps_DIVISOR	UART_BAUDDIV(19200)
-#define UART_14400bps_DIVISOR	UART_BAUDDIV(14400)
-#define UART_9600bps_DIVISOR	UART_BAUDDIV(9600)
-#define UART_2400bps_DIVISOR	UART_BAUDDIV(2400)
-#define UART_1200bps_DIVISOR	UART_BAUDDIV(1200)
-
-
-/*===========================  Counter Timer ==============================*/
-#define TIMER0_REG_BASE		ADM8668_TMR_BASE
-#define TIMER1_REG_BASE		ADM8668_TMR_BASE+0x20
-
-#define TIMER_LOAD_REG		0x00
-#define TIMER_VALUE_REG		0x04
-#define TIMER_CTRL_REG		0x08
-#define TIMER_CLR_REG		0x0c
-
-/* TIMER_LOAD_REG */
-#ifdef _FPGA_
-#define SYS_CLOCK		56000000
-#else
-#define SYS_CLOCK		175000000
-#endif
-
-#define SYS_PRESCALE		256
-
-#define TMR_10MS_TICKS		(SYS_CLOCK/SYS_PRESCALE/100)
-
-/* TIMER_CTRL_REG */
-#define TMR_PRESCALE_1		0x00
-#define TMR_PRESCALE_16		0x04
-#define TMR_PRESCALE_256	0x08
-#define TMR_MODE_PERIODIC	0x40
-#define TMR_ENABLE		0x80
-
-/* TIMER_CLR_REG */
-#define TMR_CLEAR_BIT		1
-
+/* register access macros */
+#define ADM8668_INTC_REG(_reg)	\
+	(*((volatile unsigned long *)(KSEG1ADDR(ADM8668_INTC_BASE + (_reg)))))
+#define ADM8668_LAN_REG(_reg)		\
+	(*((volatile unsigned int *)(KSEG1ADDR(ADM8668_LAN_BASE + (_reg)))))
+#define ADM8668_WAN_REG(_reg)		\
+	(*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WAN_BASE + (_reg)))))
+#define ADM8668_WLAN_REG(_reg)		\
+	(*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WLAN_BASE + (_reg)))))
+#define ADM8668_CONFIG_REG(_reg)	\
+	(*((volatile unsigned int *)(KSEG1ADDR(ADM8668_CONFIG_BASE + (_reg)))))
 
-/* Macro for access MPMC register */
-#define ADM8668_TMR_REG(base, _offset)				\
-		(*((volatile unsigned long *)(PA2VA(base + (_offset)))))
+/* lan registers */
+#define	NETCSR6			0x30
+#define	NETCSR7			0x38
+#define	NETCSR37		0xF8
 
+/* known/used CPU configuration registers */
+#define ADM8668_CR0		0x00
+#define ADM8668_CR1		0x04
+#define ADM8668_CR3		0x0C
 
-/* For GPIO control */
+/** For GPIO control **/
+#define	GPIO_REG		0x5C	/* on WLAN */
+#define CRGPIO_REG		0x20	/* on CPU */
 #define GPIO0_OUTPUT_ENABLE	0x1000
 #define GPIO1_OUTPUT_ENABLE	0x2000
 #define GPIO2_OUTPUT_ENABLE	0x4000
@@ -334,83 +136,4 @@
 #define CRGPIO_TOGGLE(num)	\
 	ADM8668_CONFIG_REG(CRGPIO_REG) ^= (1 << (6 + num))
 
-
-/*==========================================================================*/
-/* Cache Controller */
-#define ADM8668_CACHE_LINE_SIZE		16
-
-#define BIT_0			0x00000001
-#define BIT_1			0x00000002
-#define BIT_2			0x00000004
-#define BIT_3			0x00000008
-#define BIT_4			0x00000010
-#define BIT_5			0x00000020
-#define BIT_6			0x00000040
-#define BIT_7			0x00000080
-#define BIT_8			0x00000100
-#define BIT_9			0x00000200
-#define BIT_10			0x00000400
-#define BIT_11			0x00000800
-#define BIT_12			0x00001000
-#define BIT_13			0x00002000
-#define BIT_14			0x00004000
-#define BIT_15			0x00008000
-#define BIT_16			0x00010000
-#define BIT_17			0x00020000
-#define BIT_18			0x00040000
-#define BIT_19			0x00080000
-#define BIT_20			0x00100000
-#define BIT_21			0x00200000
-#define BIT_22			0x00400000
-#define BIT_23			0x00800000
-#define BIT_24			0x01000000
-#define BIT_25			0x02000000
-#define BIT_26			0x04000000
-#define BIT_27			0x08000000
-#define BIT_28			0x10000000
-#define BIT_29			0x20000000
-#define BIT_30			0x40000000
-#define BIT_31			0x80000000
-
-/* network regs */
-#define	NETCSR0			0x0
-#define	NETCSR1			0x08
-#define	NETCSR2			0x10
-#define	NETCSR3			0x18
-#define	NETCSR4			0x20
-#define	NETCSR5			0x28
-#define	NETCSR6			0x30
-#define	NETCSR7			0x38
-#define	NETCSR8			0x40
-#define	NETCSR9			0x48
-#define	NETCSR10		0x50
-#define	NETCSR11		0x58
-#define	NETCSR12		0x60
-#define	NETCSR13		0x68
-#define	NETCSR14		0x70
-#define	NETCSR15		0x78
-#define	NETCSR36		0xD0
-#define	NETCSR36A		0xD4
-#define	NETCSR36B		0xD8
-#define	NETCSR36C		0xDC	// dummy
-#define	NETCSR36D		0xE0
-#define	NETCSR36E		0xE4
-#define	NETCSR36F		0xE8
-#define	NETCSR36G		0xEC
-#define	NETCSR36H		0xF0
-#define	NETCSR36I		0xF4
-#define	NETCSR37		0xF8
-
-/* for descriptor skip DWs */
-#define NETDESCSKIP_1DW		BIT_2
-#define NETDESCSKIP_2DW		BIT_3
-#define NETDESCSKIP_3DW		(BIT_3|BIT_2)
-#define NETDESCSKIP_4DW		BIT_4
-
-
-#define ADM8668_LAN_REG(_reg)		\
-	(*((volatile unsigned int *)(PA2VA(ADM8668_LAN_BASE + (_reg)))))
-#define ADM8668_WAN_REG(_reg)		\
-	(*((volatile unsigned int *)(PA2VA(ADM8668_WAN_BASE + (_reg)))))
-
 #endif /* __ADM8668_H__ */
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h
deleted file mode 100644
index 23fdab97c2..0000000000
--- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/************************************************************************
- *
- *    Copyright (c) 2005
- *    Infineon Technologies AG
- *    St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- ************************************************************************/
-#ifndef _BSP_SUP_H_
-#define _BSP_SUP_H_
-
-#define ADD_WAN_MAC
-#define CONFIG_IFX_GAN
-#define UBOOT_CFG_ENV_SIZE	(0x400-4)
-#define ADM8668_BL_MAGIC	0x6c62676d
-#define ADM8668_MAC_MAGIC	0x69666164
-#define ADM8668_VER_MAGIC	0x7276676d
-#define ADM8668_ID_MAGIC	0x6469676d
-#define ADM8668_IF_MAGIC	0x6669676d
-#define ADM8668_WANMAC_MAGIC	0x69666164
-#define ADM8668_IMEI_MAGIC	0x6669676e
-
-#define BSP_IFNAME_MAX_LEN	15
-#define BOOT_LINE_SIZE		255
-#define BSP_STR_LEN		79
-
-
-/*
- * Boot mode configuration
- */
-typedef struct BTMODE_CFG_S
-{
-	unsigned long btmode;
-	unsigned long dlmethod;
-} BTMODE_CFG_T;
-
-
-/*
- * Interface configuration
- */
-typedef struct IF_CFG_S
-{
-	char ifname[BSP_IFNAME_MAX_LEN+1];
-	unsigned long ip;
-	unsigned long mask;
-	unsigned long gateway;
-} IF_CFG_T;
-
-
-/*
- * Board configuration
- */
-typedef struct BOARD_CFG_S
-{
-	unsigned long blmagic;
-	unsigned char blreserved[UBOOT_CFG_ENV_SIZE];
-
-	unsigned long macmagic;
-	unsigned char mac[8];
-	unsigned long macnum;
-
-	unsigned long idmagic;
-	unsigned char serial[BSP_STR_LEN+1];
-
-	unsigned long vermagic;
-	unsigned char ver[BSP_STR_LEN+1];
-
-	unsigned long ifmagic;
-	IF_CFG_T ifcfg[8];
-
-	unsigned long btmagic;
-	BTMODE_CFG_T bootmode;
-
-	unsigned long wanmagic;
-    	unsigned char wanmac[8];
-
-	unsigned long imeimagic;
-	unsigned char imei0[16];
-	unsigned char imei1[16];
-} BOARD_CFG_T, *PBOARD_CFG_T;
-
-#define ADM8668_BOARD_CFG_ADDR	(ADM8668_SMEM0_BASE + CONFIG_ADM8668_BSP_OFFSET*1024)
-#define ADM8668_BOARD_CFG_SIZE	(CONFIG_ADM8668_BSP_SIZE*1024)
-
-#endif  /* _BSP_SUP_H_   */
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h
index 425bba6a9f..1341309f2b 100644
--- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h
@@ -8,28 +8,9 @@
 #ifndef __ASM_MACH_ADM8668_IRQ_H
 #define __ASM_MACH_ADM8668_IRQ_H
 
-#ifndef NR_IRQS
-#define NR_IRQS	32
-#endif
+#define	NR_IRQS	32
+#define	MIPS_CPU_IRQ_BASE	16
 
-#ifdef CONFIG_IRQ_CPU
-
-#ifndef MIPS_CPU_IRQ_BASE
-#define MIPS_CPU_IRQ_BASE 16
-#endif
-
-#ifdef CONFIG_IRQ_CPU_RM7K
-#ifndef RM7K_CPU_IRQ_BASE
-#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8)
-#endif
-#endif
-
-#ifdef CONFIG_IRQ_CPU_RM9K
-#ifndef RM9K_CPU_IRQ_BASE
-#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
-#endif
-#endif
-
-#endif /* CONFIG_IRQ_CPU */
+#define IRQ_MASK		0xffff
 
 #endif /* __ASM_MACH_ADM8668_IRQ_H */
diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h
deleted file mode 100644
index 000d0f4a46..0000000000
--- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * MIPS boards bootprom interface for the Linux kernel.
- *
- */
-/************************************************************************
- *
- * Copyright (c) 2005
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- ************************************************************************/
-#ifndef _MIPS_PROM_H
-#define _MIPS_PROM_H
-
-extern char *prom_getcmdline(void);
-extern char *prom_getenv(char *name);
-extern void setup_prom_printf(int tty_no);
-extern void prom_printf(char *fmt, ...);
-extern void prom_init_cmdline(void);
-extern void prom_meminit(void);
-extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
-extern void prom_free_prom_memory (void);
-extern void mips_display_message(const char *str);
-extern void mips_display_word(unsigned int num);
-extern int get_ethernet_addr(char *ethernet_addr);
-
-/* Memory descriptor management. */
-#define PROM_MAX_PMEMBLOCKS    32
-struct prom_pmemblock {
-        unsigned long base; /* Within KSEG0. */
-        unsigned int size;  /* In bytes. */
-        unsigned int type;  /* free or prom memory */
-};
-
-#endif /* !(_MIPS_PROM_H) */
diff --git a/target/linux/adm8668/image/lzma-loader/src/Makefile b/target/linux/adm8668/image/lzma-loader/src/Makefile
index c1be46ffdd..998e390810 100644
--- a/target/linux/adm8668/image/lzma-loader/src/Makefile
+++ b/target/linux/adm8668/image/lzma-loader/src/Makefile
@@ -5,7 +5,7 @@
 # See /LICENSE for more information.
 #
 RAMSTART	= 0x80000000
-RAMSIZE		= 0x00800000		# 1MB
+RAMSIZE		= 0x00800000		# 8MB
 LOADADDR	= 0x80400000		# RAM start + 4M
 KERNEL_ENTRY	= 0x80002000