From: Vincent Wiemann Date: Sun, 20 Jun 2021 14:56:21 +0000 (+0200) Subject: ath79: add support for Joy-IT JT-OR750i X-Git-Tag: v21.02.0-rc4~7 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a5850c049e26aaafd9cf8bce9c499f4ffcfc2caf;p=openwrt%2Fstaging%2Fpepe2k.git ath79: add support for Joy-IT JT-OR750i Specifications: * QCA9531, 16 MiB flash (Winbond W25Q128JVSQ), 128 MiB RAM * 802.11n 2T2R (external antennas) * QCA9887, 802.11ac 1T1R (connected with diplexer to one of the antennas) * 3x 10/100 LAN, 1x 10/100 WAN * UART header with pinout printed on PCB Installation: * The device comes with a bootloader installed only * The bootloader offers DHCP and is reachable at http://10.123.123.1 * Accept the agreement and flash sysupgrade.bin * Use Firefox if flashing does not work TFTP recovery with static IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server at 192.168.0.66 * Keep the reset button pressed for 4 seconds after connecting power TFTP recovery with dynamic IP: * Rename sysupgrade.bin to jt-or750i_firmware.bin * Offer it via TFTP server with a DHCP server running at the same address * Keep the reset button pressed for 6 seconds after connecting power Co-authored-by: Sebastian Schaper Signed-off-by: Vincent Wiemann (cherry picked from commit 55b4b3655263984b92e4b9fc515a5e6b8003c655) --- diff --git a/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts new file mode 100644 index 0000000000..976d342f97 --- /dev/null +++ b/target/linux/ath79/dts/qca9531_joyit_jt-or750i.dts @@ -0,0 +1,119 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca953x.dtsi" + +#include +#include + +/ { + compatible = "joyit,jt-or750i", "qca,qca9531"; + model = "Joy-IT JT-OR750i"; + + aliases { + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_red; + label-mac-device = ð0; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + led_status_red: status_red { + label = "red:status"; + gpios = <&gpio 12 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&pinmux { + pinmux_led_eth_pins: pinmux_led_eth_pins { + pinctrl-single,bits = \ + /* GPIO 4: LED_LINK_5 (WAN) */ \ + <0x04 0x0000002d 0x000000ff>, \ + /* GPIO 14: LED_LINK_2 (LAN 3) */ \ + /* GPIO 15: LED_LINK_3 (LAN 2) */ \ + <0x0c 0x2b2c0000 0xffff0000>, \ + /* GPIO 16: LED_LINK_4 (LAN 1) */ \ + <0x10 0x0000002a 0x000000ff>; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + + partition@50000 { + label = "firmware"; + reg = <0x50000 0xfa0000>; + compatible = "denx,uimage"; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x10000>; + read-only; + }; + }; + }; +}; + +ð0 { + status = "okay"; + + phy-handle = <&swphy4>; + + mtd-mac-address = <&art 0x0>; +}; + +ð1 { + mtd-mac-address = <&art 0x6>; +}; + +&pcie0 { + status = "okay"; +}; + +&wmac { + status = "okay"; + + mtd-cal-data = <&art 0x1000>; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index fae5ac7c92..7c5eeb1112 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -220,6 +220,9 @@ glinet,gl-x750) hak5,lan-turtle) ucidef_set_led_netdev "wan" "WAN" "orange:system" "eth1" ;; +joyit,jt-or750i) + ucidef_set_led_default "ath10k" "ath10k-disable" "ath10k-phy0" "0" + ;; meraki,mr12|\ tplink,cpe210-v2|\ tplink,cpe210-v3) diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 1e522b91c6..31c0f11861 100755 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -270,6 +270,11 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "1:lan" "2:lan" "3:lan" "4:lan" "5:wan" ;; + joyit,jt-or750i) + ucidef_set_interface_wan "eth1" + ucidef_add_switch "switch0" \ + "0@eth0" "2:lan:3" "3:lan:2" "4:lan:1" + ;; librerouter,librerouter-v1) ucidef_add_switch "switch0" \ "0@eth0" "5:wan" "6@eth1" "4:lan" diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata index 5a44dd94e5..783895525b 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/firmware/11-ath10k-caldata @@ -24,6 +24,7 @@ case "$FIRMWARE" in comfast,cf-wr650ac-v1|\ comfast,cf-wr650ac-v2|\ devolo,magic-2-wifi|\ + joyit,jt-or750i|\ qxwlan,e1700ac-v2-8m|\ qxwlan,e1700ac-v2-16m|\ qxwlan,e600gac-v2-8m|\ diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 303907e5bb..ce4e462a40 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -1343,6 +1343,15 @@ define Device/jjplus_ja76pf2 endef TARGET_DEVICES += jjplus_ja76pf2 +define Device/joyit_jt-or750i + SOC := qca9531 + DEVICE_VENDOR := Joy-IT + DEVICE_MODEL := JT-OR750i + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9887-ct + IMAGE_SIZE := 16000k +endef +TARGET_DEVICES += joyit_jt-or750i + define Device/librerouter_librerouter-v1 SOC := qca9558 DEVICE_VENDOR := Librerouter