From: Leon M. Busch-George Date: Fri, 17 May 2024 18:10:25 +0000 (+0200) Subject: mediatek: filogic: prevent faulty mac address assignment X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a55ab9e1343e;p=openwrt%2Fstaging%2Fxback.git mediatek: filogic: prevent faulty mac address assignment The vendor U-Boot on the Cudy M3000 and the Yuncore AX835 assign random mac addresses on boot and set the 'local-mac-address' property which prevents Openwrt from assigning the correct address from evmem. This patch removes the alias for ethernet0 so that U-Boot doesn't add the property, removes the workaround from 02_network, and adds back the nvmem definition for the M3000. Signed-off-by: Leon M. Busch-George --- diff --git a/target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts index e700d3728a..85bdabe474 100644 --- a/target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts +++ b/target/linux/mediatek/dts/mt7981b-cudy-m3000-v1.dts @@ -9,7 +9,6 @@ compatible = "cudy,m3000-v1", "mediatek,mt7981-spim-snand-rfb"; aliases { - ethernet0 = &gmac0; label-mac-device = &gmac0; led-boot = &led_status; led-failsafe = &led_status; @@ -87,7 +86,8 @@ phy-mode = "2500base-x"; phy-handle = <&rtl8221b_phy>; - /* the MAC address assignment using nvmem-cells doesn't work, so it's done through 02_network */ + nvmem-cell-names = "mac-address"; + nvmem-cells = <&macaddr_bdinfo_de00 1>; }; gmac1: mac@1 { diff --git a/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts b/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts index 4e6e834276..8b716e8742 100644 --- a/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts +++ b/target/linux/mediatek/dts/mt7981b-yuncore-ax835.dts @@ -9,7 +9,6 @@ model = "YunCore AX835"; aliases { - ethernet0 = &gmac0; led-boot = &led_system; led-failsafe = &led_system; led-running = &led_system; diff --git a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network index 3e3d30cc23..fcaeb698d7 100644 --- a/target/linux/mediatek/filogic/base-files/etc/board.d/02_network +++ b/target/linux/mediatek/filogic/base-files/etc/board.d/02_network @@ -137,9 +137,6 @@ mediatek_setup_macs() ;; esac ;; - cudy,m3000-v1) - wan_mac=$(macaddr_add $(cat /sys/class/net/eth1/address) 1) - ;; h3c,magic-nx30-pro) wan_mac=$(mtd_get_mac_ascii pdt_data_1 ethaddr) lan_mac=$(macaddr_add "$wan_mac" 1)