From: Lorenzo Bianconi Date: Sun, 17 Sep 2017 16:17:09 +0000 (+0200) Subject: iio: st_sensors: split open-drain parameters for irq1 and irq2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a542f9a04d30570d367770e34f2c5d0c1d313337;p=openwrt%2Fstaging%2Fblogic.git iio: st_sensors: split open-drain parameters for irq1 and irq2 Define st_sensor_int_drdy structure in st_sensor_data_ready_irq in order to contain irq line parameters of the device. Moreover separate data-ready open-drain configuration parameters for INT1 and INT2 pins in st_sensor_data_ready_irq data structure. That change will be used to properly support LIS3DHH accel sensor. Signed-off-by: Lorenzo Bianconi Signed-off-by: Jonathan Cameron --- diff --git a/drivers/iio/accel/st_accel_core.c b/drivers/iio/accel/st_accel_core.c index 731ec3a4c82b..c88db25a1aff 100644 --- a/drivers/iio/accel/st_accel_core.c +++ b/drivers/iio/accel/st_accel_core.c @@ -236,15 +236,17 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .int1 = { .addr = 0x22, .mask = 0x02, + .addr_od = 0x22, + .mask_od = 0x40, }, .int2 = { .addr = 0x22, .mask = 0x10, + .addr_od = 0x22, + .mask_od = 0x40, }, .addr_ihl = 0x22, .mask_ihl = 0x80, - .addr_od = 0x22, - .mask_od = 0x40, .stat_drdy = { .addr = ST_SENSORS_DEFAULT_STAT_ADDR, .mask = 0x07, @@ -468,15 +470,17 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .int1 = { .addr = 0x22, .mask = 0x04, + .addr_od = 0x22, + .mask_od = 0x40, }, .int2 = { .addr = 0x22, .mask = 0x20, + .addr_od = 0x22, + .mask_od = 0x40, }, .addr_ihl = 0x22, .mask_ihl = 0x80, - .addr_od = 0x22, - .mask_od = 0x40, .stat_drdy = { .addr = ST_SENSORS_DEFAULT_STAT_ADDR, .mask = 0x07, @@ -750,15 +754,17 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = { .int1 = { .addr = 0x23, .mask = 0x01, + .addr_od = 0x22, + .mask_od = 0x20, }, .int2 = { .addr = 0x24, .mask = 0x01, + .addr_od = 0x22, + .mask_od = 0x20, }, .addr_ihl = 0x22, .mask_ihl = 0x08, - .addr_od = 0x22, - .mask_od = 0x20, .stat_drdy = { .addr = ST_SENSORS_DEFAULT_STAT_ADDR, .mask = 0x01, diff --git a/drivers/iio/common/st_sensors/st_sensors_core.c b/drivers/iio/common/st_sensors/st_sensors_core.c index 6657160b5a73..40dfdfc0906b 100644 --- a/drivers/iio/common/st_sensors/st_sensors_core.c +++ b/drivers/iio/common/st_sensors/st_sensors_core.c @@ -319,7 +319,8 @@ static int st_sensors_set_drdy_int_pin(struct iio_dev *indio_dev, } if (pdata->open_drain) { - if (!sdata->sensor_settings->drdy_irq.addr_od) + if (!sdata->sensor_settings->drdy_irq.int1.addr_od && + !sdata->sensor_settings->drdy_irq.int2.addr_od) dev_err(&indio_dev->dev, "open drain requested but unsupported.\n"); else @@ -446,11 +447,21 @@ int st_sensors_init_sensor(struct iio_dev *indio_dev, } if (sdata->int_pin_open_drain) { + u8 addr, mask; + + if (sdata->drdy_int_pin == 1) { + addr = sdata->sensor_settings->drdy_irq.int1.addr_od; + mask = sdata->sensor_settings->drdy_irq.int1.mask_od; + } else { + addr = sdata->sensor_settings->drdy_irq.int2.addr_od; + mask = sdata->sensor_settings->drdy_irq.int2.mask_od; + } + dev_info(&indio_dev->dev, - "set interrupt line to open drain mode\n"); - err = st_sensors_write_data_with_mask(indio_dev, - sdata->sensor_settings->drdy_irq.addr_od, - sdata->sensor_settings->drdy_irq.mask_od, 1); + "set interrupt line to open drain mode on pin %d\n", + sdata->drdy_int_pin); + err = st_sensors_write_data_with_mask(indio_dev, addr, + mask, 1); if (err < 0) return err; } diff --git a/drivers/iio/pressure/st_pressure_core.c b/drivers/iio/pressure/st_pressure_core.c index 15ad6054d9f6..349e5c713c03 100644 --- a/drivers/iio/pressure/st_pressure_core.c +++ b/drivers/iio/pressure/st_pressure_core.c @@ -283,15 +283,17 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .int1 = { .addr = 0x22, .mask = 0x04, + .addr_od = 0x22, + .mask_od = 0x40, }, .int2 = { .addr = 0x22, .mask = 0x20, + .addr_od = 0x22, + .mask_od = 0x40, }, .addr_ihl = 0x22, .mask_ihl = 0x80, - .addr_od = 0x22, - .mask_od = 0x40, .stat_drdy = { .addr = ST_SENSORS_DEFAULT_STAT_ADDR, .mask = 0x03, @@ -404,11 +406,11 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .int1 = { .addr = 0x23, .mask = 0x01, + .addr_od = 0x22, + .mask_od = 0x40, }, .addr_ihl = 0x22, .mask_ihl = 0x80, - .addr_od = 0x22, - .mask_od = 0x40, .stat_drdy = { .addr = ST_SENSORS_DEFAULT_STAT_ADDR, .mask = 0x03, @@ -473,11 +475,11 @@ static const struct st_sensor_settings st_press_sensors_settings[] = { .int1 = { .addr = 0x12, .mask = 0x04, + .addr_od = 0x12, + .mask_od = 0x40, }, .addr_ihl = 0x12, .mask_ihl = 0x80, - .addr_od = 0x12, - .mask_od = 0x40, .stat_drdy = { .addr = ST_SENSORS_DEFAULT_STAT_ADDR, .mask = 0x03, diff --git a/include/linux/iio/common/st_sensors.h b/include/linux/iio/common/st_sensors.h index e6c646d5d6d4..f9bd6e8ab138 100644 --- a/include/linux/iio/common/st_sensors.h +++ b/include/linux/iio/common/st_sensors.h @@ -130,32 +130,36 @@ struct st_sensor_das { u8 mask; }; +/** + * struct st_sensor_int_drdy - ST sensor device drdy line parameters + * @addr: address of INT drdy register. + * @mask: mask to enable drdy line. + * @addr_od: address to enable/disable Open Drain on the INT line. + * @mask_od: mask to enable/disable Open Drain on the INT line. + */ +struct st_sensor_int_drdy { + u8 addr; + u8 mask; + u8 addr_od; + u8 mask_od; +}; + /** * struct st_sensor_data_ready_irq - ST sensor device data-ready interrupt * struct int1 - data-ready configuration register for INT1 pin. * struct int2 - data-ready configuration register for INT2 pin. * @addr_ihl: address to enable/disable active low on the INT lines. * @mask_ihl: mask to enable/disable active low on the INT lines. - * @addr_od: address to enable/disable Open Drain on the INT lines. - * @mask_od: mask to enable/disable Open Drain on the INT lines. * struct stat_drdy - status register of DRDY (data ready) interrupt. * struct ig1 - represents the Interrupt Generator 1 of sensors. * @en_addr: address of the enable ig1 register. * @en_mask: mask to write the on/off value for enable. */ struct st_sensor_data_ready_irq { - struct { - u8 addr; - u8 mask; - } int1; - struct { - u8 addr; - u8 mask; - } int2; + struct st_sensor_int_drdy int1; + struct st_sensor_int_drdy int2; u8 addr_ihl; u8 mask_ihl; - u8 addr_od; - u8 mask_od; struct { u8 addr; u8 mask;