From: Dustin Gathmann Date: Wed, 20 May 2020 22:13:43 +0000 (+0200) Subject: lantiq/xrx200: make WLAN button responsive on Fritzbox 3370 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a53bf63756ef2a266ae5f3b3507eeb7382b4cdc9;p=openwrt%2Fstaging%2Fynezz.git lantiq/xrx200: make WLAN button responsive on Fritzbox 3370 Pressing the 'WLAN' button should enable/disable wireless activity. However, on the Fritzbox 3370 this doesn't have an effect. This patch changes the mapping of the physical WLAN button, so a button press will emit an action for the 'rfkill' key instead of 'wlan'. Apparently, this is what stock OpenWRT expects, and also what is implemented for most other devices. Signed-off-by: Dustin Gathmann --- diff --git a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi index bac27c3649..4c4ae1a01f 100644 --- a/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi +++ b/target/linux/lantiq/files-4.19/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi @@ -45,7 +45,7 @@ wifi { label = "wlan"; gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; - linux,code = ; + linux,code = ; }; }; diff --git a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi index bac27c3649..4c4ae1a01f 100644 --- a/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi +++ b/target/linux/lantiq/files-5.4/arch/mips/boot/dts/lantiq/vr9_avm_fritz3370-rev2.dtsi @@ -45,7 +45,7 @@ wifi { label = "wlan"; gpios = <&gpio 29 GPIO_ACTIVE_HIGH>; - linux,code = ; + linux,code = ; }; };