From: Rani Hod Date: Mon, 24 Apr 2023 22:26:28 +0000 (+0300) Subject: ramips: add support for D-Link DRA-1360 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a4eb1ea3319296d99d36be8c4d786f4e3ee6acb9;p=openwrt%2Fstaging%2Fjow.git ramips: add support for D-Link DRA-1360 The DRA-1360 rev A is a wall-plug AC1300 repeater. Hardware is identical (same FCC ID, black case instead of white) to D-Link DAP-1620 rev B, which is already supported, but a different model name, revision, and hardware ID are needed. Thus, the bulk of the DAP-1620 device tree is extracted to a common dtsi included by the two models' device trees. Repeating specs and installation instructions from e4c7703: (note that the RAM size mentioned there was incorrect, oops) Specs: - SoC: MT7621AT (880MHz dual-core MIPS1004Kc) - Memory: 128 MiB RAM, 16 MiB NOR SPI - WiFi: MT7615DN 2x2 802.11n + 2x2 802.11ac (DBDC) - Ethernet: 1 RJ45 port 10/100/1000 - Power/status LED: red+green - LED RSSI bargraph: 2x green, 1x red+green Installation: - Keep reset button pressed during plug-in - Web Recovery Updater is at 192.168.0.50 (pings are ignored, it listens only for http) - Upload factory.bin, confirm flashing (seems to work best with Chromium-based browsers) Revert to OEM firmware: - tail -c+117 DRA1360A1_FW112B03.bin | \ openssl aes-256-cbc -d -md md5 -out decrypted.bin \ -k c471706398cb147c6619f8a04a18d53e9c17ede8 - flash decrypted.bin via D-Link Web Recovery Signed-off-by: Rani Hod --- diff --git a/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts b/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts index 919e5be4b9..5005eb1a72 100644 --- a/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts +++ b/target/linux/ramips/dts/mt7621_dlink_dap-1620-b1.dts @@ -1,158 +1,8 @@ // SPDX-License-Identifier: GPL-2.0-or-later OR MIT -#include "mt7621.dtsi" - -#include -#include +#include "mt7621_dlink_dxx-1xx0-x1.dtsi" / { compatible = "dlink,dap-1620-b1", "mediatek,mt7621-soc"; model = "D-Link DAP-1620 B1"; - - aliases { - label-mac-device = &gmac0; - - led-boot = &led_status_red; - led-failsafe = &led_status_green; - led-running = &led_status_green; - led-upgrade = &led_status_red; - }; - - keys { - compatible = "gpio-keys"; - - reset { - label = "reset"; - gpios = <&gpio 7 GPIO_ACTIVE_LOW>; - linux,code = ; - debounce-interval = <60>; - }; - - wps { - label = "wps"; - gpios = <&gpio 18 GPIO_ACTIVE_LOW>; - linux,code = ; - }; - }; - - leds { - compatible = "gpio-leds"; - - led_status_red: status_red { - label = "red:status"; - gpios = <&gpio 16 GPIO_ACTIVE_LOW>; - }; - - led_status_green: status_green { - label = "green:status"; - gpios = <&gpio 13 GPIO_ACTIVE_LOW>; - }; - - rssi_low_red { - label = "red:rssilow"; - gpios = <&gpio 25 GPIO_ACTIVE_LOW>; - }; - - rssi_low_green { - label = "green:rssilow"; - gpios = <&gpio 24 GPIO_ACTIVE_LOW>; - }; - - rssi_med_green { - label = "green:rssimed"; - gpios = <&gpio 23 GPIO_ACTIVE_LOW>; - }; - - rssi_high_green { - label = "green:rssihigh"; - gpios = <&gpio 22 GPIO_ACTIVE_LOW>; - }; - }; -}; - -&spi0 { - status = "okay"; - - flash@0 { - compatible = "jedec,spi-nor"; - reg = <0>; - spi-max-frequency = <50000000>; - - partitions { - compatible = "fixed-partitions"; - #address-cells = <1>; - #size-cells = <1>; - - partition@0 { - label = "u-boot"; - reg = <0x0 0x30000>; - read-only; - }; - - partition@30000 { - label = "u-boot-env"; - reg = <0x30000 0x10000>; - read-only; - }; - - factory: partition@40000 { - label = "factory"; - reg = <0x40000 0x10000>; - read-only; - - compatible = "nvmem-cells"; - #address-cells = <1>; - #size-cells = <1>; - - macaddr_factory_e000: macaddr@e000 { - reg = <0xe000 0x6>; - }; - }; - - partition@50000 { - compatible = "denx,uimage"; - label = "firmware"; - reg = <0x50000 0xfb0000>; - }; - }; - }; -}; - -&pcie { - status = "okay"; -}; - -&pcie0 { - wifi@0,0 { - compatible = "mediatek,mt76"; - reg = <0x0000 0 0 0 0>; - mediatek,mtd-eeprom = <&factory 0x0>; - /* The correct MAC addresses are set in 10_fix_wifi_mac. */ - }; }; - -&gmac0 { - nvmem-cells = <&macaddr_factory_e000>; - nvmem-cell-names = "mac-address"; -}; - -&switch0 { - ports { - port@0 { - status = "okay"; - label = "lan"; - }; - }; -}; - -ðernet { - pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; -}; - -&state_default { - gpio { - groups = "uart3", "jtag", "wdt"; - function = "gpio"; - }; -}; - diff --git a/target/linux/ramips/dts/mt7621_dlink_dra-1360-a1.dts b/target/linux/ramips/dts/mt7621_dlink_dra-1360-a1.dts new file mode 100644 index 0000000000..294093b6ff --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dra-1360-a1.dts @@ -0,0 +1,8 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621_dlink_dxx-1xx0-x1.dtsi" + +/ { + compatible = "dlink,dra-1360-a1", "mediatek,mt7621-soc"; + model = "D-Link DRA-1360 A1"; +}; diff --git a/target/linux/ramips/dts/mt7621_dlink_dxx-1xx0-x1.dtsi b/target/linux/ramips/dts/mt7621_dlink_dxx-1xx0-x1.dtsi new file mode 100644 index 0000000000..8fb6de7c48 --- /dev/null +++ b/target/linux/ramips/dts/mt7621_dlink_dxx-1xx0-x1.dtsi @@ -0,0 +1,154 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "mt7621.dtsi" + +#include +#include + +/ { + aliases { + label-mac-device = &gmac0; + + led-boot = &led_status_red; + led-failsafe = &led_status_green; + led-running = &led_status_green; + led-upgrade = &led_status_red; + }; + + keys { + compatible = "gpio-keys"; + + reset { + label = "reset"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + linux,code = ; + debounce-interval = <60>; + }; + + wps { + label = "wps"; + gpios = <&gpio 18 GPIO_ACTIVE_LOW>; + linux,code = ; + }; + }; + + leds { + compatible = "gpio-leds"; + + led_status_red: status_red { + label = "red:status"; + gpios = <&gpio 16 GPIO_ACTIVE_LOW>; + }; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + rssi_low_red { + label = "red:rssilow"; + gpios = <&gpio 25 GPIO_ACTIVE_LOW>; + }; + + rssi_low_green { + label = "green:rssilow"; + gpios = <&gpio 24 GPIO_ACTIVE_LOW>; + }; + + rssi_med_green { + label = "green:rssimed"; + gpios = <&gpio 23 GPIO_ACTIVE_LOW>; + }; + + rssi_high_green { + label = "green:rssihigh"; + gpios = <&gpio 22 GPIO_ACTIVE_LOW>; + }; + }; +}; + +&spi0 { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x30000>; + read-only; + }; + + partition@30000 { + label = "u-boot-env"; + reg = <0x30000 0x10000>; + read-only; + }; + + factory: partition@40000 { + label = "factory"; + reg = <0x40000 0x10000>; + read-only; + + compatible = "nvmem-cells"; + #address-cells = <1>; + #size-cells = <1>; + + macaddr_factory_e000: macaddr@e000 { + reg = <0xe000 0x6>; + }; + }; + + partition@50000 { + compatible = "denx,uimage"; + label = "firmware"; + reg = <0x50000 0xfb0000>; + }; + }; + }; +}; + +&pcie { + status = "okay"; +}; + +&pcie0 { + wifi@0,0 { + compatible = "mediatek,mt76"; + reg = <0x0000 0 0 0 0>; + mediatek,mtd-eeprom = <&factory 0x0>; + /* The correct MAC addresses are set in 10_fix_wifi_mac. */ + }; +}; + +&gmac0 { + nvmem-cells = <&macaddr_factory_e000>; + nvmem-cell-names = "mac-address"; +}; + +&switch0 { + ports { + port@0 { + status = "okay"; + label = "lan"; + }; + }; +}; + +ðernet { + pinctrl-0 = <&mdio_pins>, <&rgmii1_pins>; +}; + +&state_default { + gpio { + groups = "uart3", "jtag", "wdt"; + function = "gpio"; + }; +}; diff --git a/target/linux/ramips/image/mt7621.mk b/target/linux/ramips/image/mt7621.mk index ad45613a0b..338cbae5b6 100644 --- a/target/linux/ramips/image/mt7621.mk +++ b/target/linux/ramips/image/mt7621.mk @@ -614,12 +614,9 @@ define Device/cudy_x6-v2 endef TARGET_DEVICES += cudy_x6-v2 -define Device/dlink_dap-1620-b1 +define Device/dlink_dxx-1xx0-x1 DEVICE_VENDOR := D-Link - DEVICE_MODEL := DAP-1620 - DEVICE_VARIANT := B1 DEVICE_PACKAGES := kmod-mt7615-firmware rssileds - DLINK_HWID := MT76XMT7621-RP-PR2475-NA IMAGE_SIZE := 16064k IMAGES += factory.bin IMAGE/factory.bin := $$(sysupgrade_bin) | \ @@ -628,6 +625,13 @@ define Device/dlink_dap-1620-b1 append-string $$(DLINK_HWID) | \ check-size endef + +define Device/dlink_dap-1620-b1 + $(Device/dlink_dxx-1xx0-x1) + DEVICE_MODEL := DAP-1620 + DEVICE_VARIANT := B1 + DLINK_HWID := MT76XMT7621-RP-PR2475-NA +endef TARGET_DEVICES += dlink_dap-1620-b1 define Device/dlink_dap-x1860-a1 @@ -799,6 +803,14 @@ define Device/dlink_dir-882-r1 endef TARGET_DEVICES += dlink_dir-882-r1 +define Device/dlink_dra-1360-a1 + $(Device/dlink_dxx-1xx0-x1) + DEVICE_MODEL := DRA-1360 + DEVICE_VARIANT := A1 + DLINK_HWID := MT76XMT7621-RP-RA1360-NA +endef +TARGET_DEVICES += dlink_dra-1360-a1 + define Device/dual-q_h721 $(Device/dsa-migration) $(Device/uimage-lzma-loader) diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds index 1de35104c3..1e13c04c2f 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/01_leds @@ -69,7 +69,8 @@ jcg,y2|\ xzwifi,creativebox-v1) ucidef_set_led_netdev "internet" "internet" "blue:internet" "wan" ;; -dlink,dap-1620-b1) +dlink,dap-1620-b1|\ +dlink,dra-1360-a1) ucidef_set_rssimon "wlan1" "200000" "1" ucidef_set_led_rssi "rssilow" "RSSILOW" "red:rssilow" "wlan1" "1" "40" ucidef_set_led_rssi "rssimediumlow" "RSSIMEDIUMLOW" "green:rssilow" "wlan1" "21" "100" diff --git a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network index bd4cb50812..7bd5e83c5a 100644 --- a/target/linux/ramips/mt7621/base-files/etc/board.d/02_network +++ b/target/linux/ramips/mt7621/base-files/etc/board.d/02_network @@ -16,6 +16,7 @@ ramips_setup_interfaces() asus,rp-ac87|\ dlink,dap-1620-b1|\ dlink,dap-x1860-a1|\ + dlink,dra-1360-a1|\ edimax,re23s|\ linksys,re7000|\ mikrotik,ltap-2hnd|\ diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index a15b4a225f..96b49ff00a 100644 --- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -38,7 +38,8 @@ case "$board" in macaddr_setbit_la "$(macaddr_add $hw_mac_addr 0x100000)" > /sys${DEVPATH}/macaddress ;; dlink,dap-1620-b1|\ - dlink,dir-853-a1) + dlink,dir-853-a1|\ + dlink,dra-1360-a1) lan_mac_addr="$(mtd_get_mac_binary factory 0xe000)" [ "$PHYNBR" = "0" ] && \ macaddr_add $lan_mac_addr 1 > /sys${DEVPATH}/macaddress