From: Allen Martin <amartin@nvidia.com>
Date: Fri, 31 Aug 2012 08:30:11 +0000 (+0000)
Subject: tegra20: move SDRAM param save to later in boot
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a49716aa7cda96f5e8cd15e57587da7a99f9e330;p=project%2Fbcm63xx%2Fu-boot.git

tegra20: move SDRAM param save to later in boot

Move warmboot_save_sdram_params() to later in the boot sequence.  This
code relies on devicetree to get the address of the memory controller
and with upcoming changes for SPL boot it gets called early in the
boot process when devicetree is not initialized yet.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Stephen Warren <swarren@wwwdotorg.org>
Tested-by: Thierry Reding <thierry.reding@avionic-design.de>
Signed-off-by: Tom Warren <twarren@nvidia.com>
---

diff --git a/arch/arm/cpu/tegra20-common/ap20.c b/arch/arm/cpu/tegra20-common/ap20.c
index 8b6afbcf57..6ff71e0b3b 100644
--- a/arch/arm/cpu/tegra20-common/ap20.c
+++ b/arch/arm/cpu/tegra20-common/ap20.c
@@ -345,11 +345,6 @@ void init_pmc_scratch(void)
 	/* ODMDATA is for kernel use to determine RAM size, LP config, etc. */
 	odmdata = get_odmdata();
 	writel(odmdata, &pmc->pmc_scratch20);
-
-#ifdef CONFIG_TEGRA20_LP0
-	/* save Sdram params to PMC 2, 4, and 24 for WB0 */
-	warmboot_save_sdram_params();
-#endif
 }
 
 void tegra20_start(void)
diff --git a/board/nvidia/common/board.c b/board/nvidia/common/board.c
index 6753f950f7..7ab20408e8 100644
--- a/board/nvidia/common/board.c
+++ b/board/nvidia/common/board.c
@@ -133,6 +133,9 @@ int board_init(void)
 #endif
 
 #ifdef CONFIG_TEGRA20_LP0
+	/* save Sdram params to PMC 2, 4, and 24 for WB0 */
+	warmboot_save_sdram_params();
+
 	/* prepare the WB code to LP0 location */
 	warmboot_prepare_code(TEGRA_LP0_ADDR, TEGRA_LP0_SIZE);
 #endif