From: Tony Ambardar Date: Thu, 23 Jul 2020 02:40:12 +0000 (-0700) Subject: kernel: mips: restore missing MIPS32 cBPF JIT X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a4856dab0d7d68b03b4925e8fea183fe788eb7d7;p=openwrt%2Fstaging%2Fyousong.git kernel: mips: restore missing MIPS32 cBPF JIT Kernel v5.1 included an eBPF JIT for MIPS32 kernels, but problems were discovered [1] and the changes later reverted in kernel v5.5 with commits: * f8fffebdea75 ("MIPS: BPF: Disable MIPS32 eBPF JIT") * 36366e367ee9 ("MIPS: BPF: Restore MIPS32 cBPF JIT") Only the first of these was backported to LTS kernel 5.4, leaving cBPF programs without a JIT and introducing a performance regression for any such users e.g. libpcap, tcpdump, etc. Restore cBPF performance by backporting the second commit above: * 070-v5.5-MIPS-BPF-Restore-MIPS32-cBPF-JIT.patch [1] https://lore.kernel.org/bpf/20191205182318.2761605-1-paulburton@kernel.org/ Signed-off-by: Tony Ambardar --- diff --git a/target/linux/generic/backport-5.4/070-v5.5-MIPS-BPF-Restore-MIPS32-cBPF-JIT.patch b/target/linux/generic/backport-5.4/070-v5.5-MIPS-BPF-Restore-MIPS32-cBPF-JIT.patch new file mode 100644 index 0000000000..793c8be24a --- /dev/null +++ b/target/linux/generic/backport-5.4/070-v5.5-MIPS-BPF-Restore-MIPS32-cBPF-JIT.patch @@ -0,0 +1,1663 @@ +From 36366e367ee93ced84fddb8fae6675e12985f5a4 Mon Sep 17 00:00:00 2001 +From: Paul Burton +Date: Thu, 5 Dec 2019 10:23:18 -0800 +Subject: [PATCH] MIPS: BPF: Restore MIPS32 cBPF JIT + +Commit 716850ab104d ("MIPS: eBPF: Initial eBPF support for MIPS32 +architecture.") enabled our eBPF JIT for MIPS32 kernels, whereas it has +previously only been availailable for MIPS64. It was my understanding at +the time that the BPF test suite was passing & JITing a comparable +number of tests to our cBPF JIT [1], but it turns out that was not the +case. + +The eBPF JIT has a number of problems on MIPS32: + +- Most notably various code paths still result in emission of MIPS64 + instructions which will cause reserved instruction exceptions & kernel + panics when run on MIPS32 CPUs. + +- The eBPF JIT doesn't account for differences between the O32 ABI used + by MIPS32 kernels versus the N64 ABI used by MIPS64 kernels. Notably + arguments beyond the first 4 are passed on the stack in O32, and this + is entirely unhandled when JITing a BPF_CALL instruction. Stack space + must be reserved for arguments even if they all fit in registers, and + the callee is free to assume that stack space has been reserved for + its use - with the eBPF JIT this is not the case, so calling any + function can result in clobbering values on the stack & unpredictable + behaviour. Function arguments in eBPF are always 64-bit values which + is also entirely unhandled - the JIT still uses a single (32-bit) + register per argument. As a result all function arguments are always + passed incorrectly when JITing a BPF_CALL instruction, leading to + kernel crashes or strange behavior. + +- The JIT attempts to bail our on use of ALU64 instructions or 64-bit + memory access instructions. The code doing this at the start of + build_one_insn() incorrectly checks whether BPF_OP() equals BPF_DW, + when it should really be checking BPF_SIZE() & only doing so when + BPF_CLASS() is one of BPF_{LD,LDX,ST,STX}. This results in false + positives that cause more bailouts than intended, and that in turns + hides some of the problems described above. + +- The kernel's cBPF->eBPF translation makes heavy use of 64-bit eBPF + instructions that the MIPS32 eBPF JIT bails out on, leading to most + cBPF programs not being JITed at all. + +Until these problems are resolved, revert the removal of the cBPF JIT +performed by commit 716850ab104d ("MIPS: eBPF: Initial eBPF support for +MIPS32 architecture."). Together with commit f8fffebdea75 ("MIPS: BPF: +Disable MIPS32 eBPF JIT") this restores MIPS32 BPF JIT behavior back to +the same state it was prior to the introduction of the broken eBPF JIT +support. + +[1] https://lore.kernel.org/linux-mips/MWHPR2201MB13583388481F01A422CE7D66D4410@MWHPR2201MB1358.namprd22.prod.outlook.com/ + +Signed-off-by: Paul Burton +Fixes: 716850ab104d ("MIPS: eBPF: Initial eBPF support for MIPS32 architecture.") +Cc: Daniel Borkmann +Cc: Hassan Naveed +Cc: Tony Ambardar +Cc: bpf@vger.kernel.org +Cc: netdev@vger.kernel.org +Cc: linux-mips@vger.kernel.org +Cc: linux-kernel@vger.kernel.org +--- + arch/mips/Kconfig | 1 + + arch/mips/net/Makefile | 1 + + arch/mips/net/bpf_jit.c | 1270 +++++++++++++++++++++++++++++++++++ + arch/mips/net/bpf_jit_asm.S | 285 ++++++++ + 4 files changed, 1557 insertions(+) + create mode 100644 arch/mips/net/bpf_jit.c + create mode 100644 arch/mips/net/bpf_jit_asm.S + +diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig +index e5c2d47608fe..33674cdc3aa8 100644 +--- a/arch/mips/Kconfig ++++ b/arch/mips/Kconfig +@@ -46,6 +46,7 @@ config MIPS + select HAVE_ARCH_TRACEHOOK + select HAVE_ARCH_TRANSPARENT_HUGEPAGE if CPU_SUPPORTS_HUGEPAGES + select HAVE_ASM_MODVERSIONS ++ select HAVE_CBPF_JIT if !64BIT && !CPU_MICROMIPS + select HAVE_EBPF_JIT if 64BIT && !CPU_MICROMIPS && TARGET_ISA_REV >= 2 + select HAVE_CONTEXT_TRACKING + select HAVE_COPY_THREAD_TLS +diff --git a/arch/mips/net/Makefile b/arch/mips/net/Makefile +index 2d03af7d6b19..d55912349039 100644 +--- a/arch/mips/net/Makefile ++++ b/arch/mips/net/Makefile +@@ -1,4 +1,5 @@ + # SPDX-License-Identifier: GPL-2.0-only + # MIPS networking code + ++obj-$(CONFIG_MIPS_CBPF_JIT) += bpf_jit.o bpf_jit_asm.o + obj-$(CONFIG_MIPS_EBPF_JIT) += ebpf_jit.o +diff --git a/arch/mips/net/bpf_jit.c b/arch/mips/net/bpf_jit.c +new file mode 100644 +index 000000000000..3a0e34f4e615 +--- /dev/null ++++ b/arch/mips/net/bpf_jit.c +@@ -0,0 +1,1270 @@ ++/* ++ * Just-In-Time compiler for BPF filters on MIPS ++ * ++ * Copyright (c) 2014 Imagination Technologies Ltd. ++ * Author: Markos Chandras ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; version 2 of the License. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#include "bpf_jit.h" ++ ++/* ABI ++ * r_skb_hl SKB header length ++ * r_data SKB data pointer ++ * r_off Offset ++ * r_A BPF register A ++ * r_X BPF register X ++ * r_skb *skb ++ * r_M *scratch memory ++ * r_skb_len SKB length ++ * ++ * On entry (*bpf_func)(*skb, *filter) ++ * a0 = MIPS_R_A0 = skb; ++ * a1 = MIPS_R_A1 = filter; ++ * ++ * Stack ++ * ... ++ * M[15] ++ * M[14] ++ * M[13] ++ * ... ++ * M[0] <-- r_M ++ * saved reg k-1 ++ * saved reg k-2 ++ * ... ++ * saved reg 0 <-- r_sp ++ * ++ * ++ * Packet layout ++ * ++ * <--------------------- len ------------------------> ++ * <--skb-len(r_skb_hl)-->< ----- skb->data_len ------> ++ * ---------------------------------------------------- ++ * | skb->data | ++ * ---------------------------------------------------- ++ */ ++ ++#define ptr typeof(unsigned long) ++ ++#define SCRATCH_OFF(k) (4 * (k)) ++ ++/* JIT flags */ ++#define SEEN_CALL (1 << BPF_MEMWORDS) ++#define SEEN_SREG_SFT (BPF_MEMWORDS + 1) ++#define SEEN_SREG_BASE (1 << SEEN_SREG_SFT) ++#define SEEN_SREG(x) (SEEN_SREG_BASE << (x)) ++#define SEEN_OFF SEEN_SREG(2) ++#define SEEN_A SEEN_SREG(3) ++#define SEEN_X SEEN_SREG(4) ++#define SEEN_SKB SEEN_SREG(5) ++#define SEEN_MEM SEEN_SREG(6) ++/* SEEN_SK_DATA also implies skb_hl an skb_len */ ++#define SEEN_SKB_DATA (SEEN_SREG(7) | SEEN_SREG(1) | SEEN_SREG(0)) ++ ++/* Arguments used by JIT */ ++#define ARGS_USED_BY_JIT 2 /* only applicable to 64-bit */ ++ ++#define SBIT(x) (1 << (x)) /* Signed version of BIT() */ ++ ++/** ++ * struct jit_ctx - JIT context ++ * @skf: The sk_filter ++ * @prologue_bytes: Number of bytes for prologue ++ * @idx: Instruction index ++ * @flags: JIT flags ++ * @offsets: Instruction offsets ++ * @target: Memory location for the compiled filter ++ */ ++struct jit_ctx { ++ const struct bpf_prog *skf; ++ unsigned int prologue_bytes; ++ u32 idx; ++ u32 flags; ++ u32 *offsets; ++ u32 *target; ++}; ++ ++ ++static inline int optimize_div(u32 *k) ++{ ++ /* power of 2 divides can be implemented with right shift */ ++ if (!(*k & (*k-1))) { ++ *k = ilog2(*k); ++ return 1; ++ } ++ ++ return 0; ++} ++ ++static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx); ++ ++/* Simply emit the instruction if the JIT memory space has been allocated */ ++#define emit_instr(ctx, func, ...) \ ++do { \ ++ if ((ctx)->target != NULL) { \ ++ u32 *p = &(ctx)->target[ctx->idx]; \ ++ uasm_i_##func(&p, ##__VA_ARGS__); \ ++ } \ ++ (ctx)->idx++; \ ++} while (0) ++ ++/* ++ * Similar to emit_instr but it must be used when we need to emit ++ * 32-bit or 64-bit instructions ++ */ ++#define emit_long_instr(ctx, func, ...) \ ++do { \ ++ if ((ctx)->target != NULL) { \ ++ u32 *p = &(ctx)->target[ctx->idx]; \ ++ UASM_i_##func(&p, ##__VA_ARGS__); \ ++ } \ ++ (ctx)->idx++; \ ++} while (0) ++ ++/* Determine if immediate is within the 16-bit signed range */ ++static inline bool is_range16(s32 imm) ++{ ++ return !(imm >= SBIT(15) || imm < -SBIT(15)); ++} ++ ++static inline void emit_addu(unsigned int dst, unsigned int src1, ++ unsigned int src2, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, addu, dst, src1, src2); ++} ++ ++static inline void emit_nop(struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, nop); ++} ++ ++/* Load a u32 immediate to a register */ ++static inline void emit_load_imm(unsigned int dst, u32 imm, struct jit_ctx *ctx) ++{ ++ if (ctx->target != NULL) { ++ /* addiu can only handle s16 */ ++ if (!is_range16(imm)) { ++ u32 *p = &ctx->target[ctx->idx]; ++ uasm_i_lui(&p, r_tmp_imm, (s32)imm >> 16); ++ p = &ctx->target[ctx->idx + 1]; ++ uasm_i_ori(&p, dst, r_tmp_imm, imm & 0xffff); ++ } else { ++ u32 *p = &ctx->target[ctx->idx]; ++ uasm_i_addiu(&p, dst, r_zero, imm); ++ } ++ } ++ ctx->idx++; ++ ++ if (!is_range16(imm)) ++ ctx->idx++; ++} ++ ++static inline void emit_or(unsigned int dst, unsigned int src1, ++ unsigned int src2, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, or, dst, src1, src2); ++} ++ ++static inline void emit_ori(unsigned int dst, unsigned src, u32 imm, ++ struct jit_ctx *ctx) ++{ ++ if (imm >= BIT(16)) { ++ emit_load_imm(r_tmp, imm, ctx); ++ emit_or(dst, src, r_tmp, ctx); ++ } else { ++ emit_instr(ctx, ori, dst, src, imm); ++ } ++} ++ ++static inline void emit_daddiu(unsigned int dst, unsigned int src, ++ int imm, struct jit_ctx *ctx) ++{ ++ /* ++ * Only used for stack, so the imm is relatively small ++ * and it fits in 15-bits ++ */ ++ emit_instr(ctx, daddiu, dst, src, imm); ++} ++ ++static inline void emit_addiu(unsigned int dst, unsigned int src, ++ u32 imm, struct jit_ctx *ctx) ++{ ++ if (!is_range16(imm)) { ++ emit_load_imm(r_tmp, imm, ctx); ++ emit_addu(dst, r_tmp, src, ctx); ++ } else { ++ emit_instr(ctx, addiu, dst, src, imm); ++ } ++} ++ ++static inline void emit_and(unsigned int dst, unsigned int src1, ++ unsigned int src2, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, and, dst, src1, src2); ++} ++ ++static inline void emit_andi(unsigned int dst, unsigned int src, ++ u32 imm, struct jit_ctx *ctx) ++{ ++ /* If imm does not fit in u16 then load it to register */ ++ if (imm >= BIT(16)) { ++ emit_load_imm(r_tmp, imm, ctx); ++ emit_and(dst, src, r_tmp, ctx); ++ } else { ++ emit_instr(ctx, andi, dst, src, imm); ++ } ++} ++ ++static inline void emit_xor(unsigned int dst, unsigned int src1, ++ unsigned int src2, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, xor, dst, src1, src2); ++} ++ ++static inline void emit_xori(ptr dst, ptr src, u32 imm, struct jit_ctx *ctx) ++{ ++ /* If imm does not fit in u16 then load it to register */ ++ if (imm >= BIT(16)) { ++ emit_load_imm(r_tmp, imm, ctx); ++ emit_xor(dst, src, r_tmp, ctx); ++ } else { ++ emit_instr(ctx, xori, dst, src, imm); ++ } ++} ++ ++static inline void emit_stack_offset(int offset, struct jit_ctx *ctx) ++{ ++ emit_long_instr(ctx, ADDIU, r_sp, r_sp, offset); ++} ++ ++static inline void emit_subu(unsigned int dst, unsigned int src1, ++ unsigned int src2, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, subu, dst, src1, src2); ++} ++ ++static inline void emit_neg(unsigned int reg, struct jit_ctx *ctx) ++{ ++ emit_subu(reg, r_zero, reg, ctx); ++} ++ ++static inline void emit_sllv(unsigned int dst, unsigned int src, ++ unsigned int sa, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, sllv, dst, src, sa); ++} ++ ++static inline void emit_sll(unsigned int dst, unsigned int src, ++ unsigned int sa, struct jit_ctx *ctx) ++{ ++ /* sa is 5-bits long */ ++ if (sa >= BIT(5)) ++ /* Shifting >= 32 results in zero */ ++ emit_jit_reg_move(dst, r_zero, ctx); ++ else ++ emit_instr(ctx, sll, dst, src, sa); ++} ++ ++static inline void emit_srlv(unsigned int dst, unsigned int src, ++ unsigned int sa, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, srlv, dst, src, sa); ++} ++ ++static inline void emit_srl(unsigned int dst, unsigned int src, ++ unsigned int sa, struct jit_ctx *ctx) ++{ ++ /* sa is 5-bits long */ ++ if (sa >= BIT(5)) ++ /* Shifting >= 32 results in zero */ ++ emit_jit_reg_move(dst, r_zero, ctx); ++ else ++ emit_instr(ctx, srl, dst, src, sa); ++} ++ ++static inline void emit_slt(unsigned int dst, unsigned int src1, ++ unsigned int src2, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, slt, dst, src1, src2); ++} ++ ++static inline void emit_sltu(unsigned int dst, unsigned int src1, ++ unsigned int src2, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, sltu, dst, src1, src2); ++} ++ ++static inline void emit_sltiu(unsigned dst, unsigned int src, ++ unsigned int imm, struct jit_ctx *ctx) ++{ ++ /* 16 bit immediate */ ++ if (!is_range16((s32)imm)) { ++ emit_load_imm(r_tmp, imm, ctx); ++ emit_sltu(dst, src, r_tmp, ctx); ++ } else { ++ emit_instr(ctx, sltiu, dst, src, imm); ++ } ++ ++} ++ ++/* Store register on the stack */ ++static inline void emit_store_stack_reg(ptr reg, ptr base, ++ unsigned int offset, ++ struct jit_ctx *ctx) ++{ ++ emit_long_instr(ctx, SW, reg, offset, base); ++} ++ ++static inline void emit_store(ptr reg, ptr base, unsigned int offset, ++ struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, sw, reg, offset, base); ++} ++ ++static inline void emit_load_stack_reg(ptr reg, ptr base, ++ unsigned int offset, ++ struct jit_ctx *ctx) ++{ ++ emit_long_instr(ctx, LW, reg, offset, base); ++} ++ ++static inline void emit_load(unsigned int reg, unsigned int base, ++ unsigned int offset, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, lw, reg, offset, base); ++} ++ ++static inline void emit_load_byte(unsigned int reg, unsigned int base, ++ unsigned int offset, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, lb, reg, offset, base); ++} ++ ++static inline void emit_half_load(unsigned int reg, unsigned int base, ++ unsigned int offset, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, lh, reg, offset, base); ++} ++ ++static inline void emit_half_load_unsigned(unsigned int reg, unsigned int base, ++ unsigned int offset, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, lhu, reg, offset, base); ++} ++ ++static inline void emit_mul(unsigned int dst, unsigned int src1, ++ unsigned int src2, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, mul, dst, src1, src2); ++} ++ ++static inline void emit_div(unsigned int dst, unsigned int src, ++ struct jit_ctx *ctx) ++{ ++ if (ctx->target != NULL) { ++ u32 *p = &ctx->target[ctx->idx]; ++ uasm_i_divu(&p, dst, src); ++ p = &ctx->target[ctx->idx + 1]; ++ uasm_i_mflo(&p, dst); ++ } ++ ctx->idx += 2; /* 2 insts */ ++} ++ ++static inline void emit_mod(unsigned int dst, unsigned int src, ++ struct jit_ctx *ctx) ++{ ++ if (ctx->target != NULL) { ++ u32 *p = &ctx->target[ctx->idx]; ++ uasm_i_divu(&p, dst, src); ++ p = &ctx->target[ctx->idx + 1]; ++ uasm_i_mfhi(&p, dst); ++ } ++ ctx->idx += 2; /* 2 insts */ ++} ++ ++static inline void emit_dsll(unsigned int dst, unsigned int src, ++ unsigned int sa, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, dsll, dst, src, sa); ++} ++ ++static inline void emit_dsrl32(unsigned int dst, unsigned int src, ++ unsigned int sa, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, dsrl32, dst, src, sa); ++} ++ ++static inline void emit_wsbh(unsigned int dst, unsigned int src, ++ struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, wsbh, dst, src); ++} ++ ++/* load pointer to register */ ++static inline void emit_load_ptr(unsigned int dst, unsigned int src, ++ int imm, struct jit_ctx *ctx) ++{ ++ /* src contains the base addr of the 32/64-pointer */ ++ emit_long_instr(ctx, LW, dst, imm, src); ++} ++ ++/* load a function pointer to register */ ++static inline void emit_load_func(unsigned int reg, ptr imm, ++ struct jit_ctx *ctx) ++{ ++ if (IS_ENABLED(CONFIG_64BIT)) { ++ /* At this point imm is always 64-bit */ ++ emit_load_imm(r_tmp, (u64)imm >> 32, ctx); ++ emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */ ++ emit_ori(r_tmp, r_tmp_imm, (imm >> 16) & 0xffff, ctx); ++ emit_dsll(r_tmp_imm, r_tmp, 16, ctx); /* left shift by 16 */ ++ emit_ori(reg, r_tmp_imm, imm & 0xffff, ctx); ++ } else { ++ emit_load_imm(reg, imm, ctx); ++ } ++} ++ ++/* Move to real MIPS register */ ++static inline void emit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx) ++{ ++ emit_long_instr(ctx, ADDU, dst, src, r_zero); ++} ++ ++/* Move to JIT (32-bit) register */ ++static inline void emit_jit_reg_move(ptr dst, ptr src, struct jit_ctx *ctx) ++{ ++ emit_addu(dst, src, r_zero, ctx); ++} ++ ++/* Compute the immediate value for PC-relative branches. */ ++static inline u32 b_imm(unsigned int tgt, struct jit_ctx *ctx) ++{ ++ if (ctx->target == NULL) ++ return 0; ++ ++ /* ++ * We want a pc-relative branch. We only do forward branches ++ * so tgt is always after pc. tgt is the instruction offset ++ * we want to jump to. ++ ++ * Branch on MIPS: ++ * I: target_offset <- sign_extend(offset) ++ * I+1: PC += target_offset (delay slot) ++ * ++ * ctx->idx currently points to the branch instruction ++ * but the offset is added to the delay slot so we need ++ * to subtract 4. ++ */ ++ return ctx->offsets[tgt] - ++ (ctx->idx * 4 - ctx->prologue_bytes) - 4; ++} ++ ++static inline void emit_bcond(int cond, unsigned int reg1, unsigned int reg2, ++ unsigned int imm, struct jit_ctx *ctx) ++{ ++ if (ctx->target != NULL) { ++ u32 *p = &ctx->target[ctx->idx]; ++ ++ switch (cond) { ++ case MIPS_COND_EQ: ++ uasm_i_beq(&p, reg1, reg2, imm); ++ break; ++ case MIPS_COND_NE: ++ uasm_i_bne(&p, reg1, reg2, imm); ++ break; ++ case MIPS_COND_ALL: ++ uasm_i_b(&p, imm); ++ break; ++ default: ++ pr_warn("%s: Unhandled branch conditional: %d\n", ++ __func__, cond); ++ } ++ } ++ ctx->idx++; ++} ++ ++static inline void emit_b(unsigned int imm, struct jit_ctx *ctx) ++{ ++ emit_bcond(MIPS_COND_ALL, r_zero, r_zero, imm, ctx); ++} ++ ++static inline void emit_jalr(unsigned int link, unsigned int reg, ++ struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, jalr, link, reg); ++} ++ ++static inline void emit_jr(unsigned int reg, struct jit_ctx *ctx) ++{ ++ emit_instr(ctx, jr, reg); ++} ++ ++static inline u16 align_sp(unsigned int num) ++{ ++ /* Double word alignment for 32-bit, quadword for 64-bit */ ++ unsigned int align = IS_ENABLED(CONFIG_64BIT) ? 16 : 8; ++ num = (num + (align - 1)) & -align; ++ return num; ++} ++ ++static void save_bpf_jit_regs(struct jit_ctx *ctx, unsigned offset) ++{ ++ int i = 0, real_off = 0; ++ u32 sflags, tmp_flags; ++ ++ /* Adjust the stack pointer */ ++ if (offset) ++ emit_stack_offset(-align_sp(offset), ctx); ++ ++ tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT; ++ /* sflags is essentially a bitmap */ ++ while (tmp_flags) { ++ if ((sflags >> i) & 0x1) { ++ emit_store_stack_reg(MIPS_R_S0 + i, r_sp, real_off, ++ ctx); ++ real_off += SZREG; ++ } ++ i++; ++ tmp_flags >>= 1; ++ } ++ ++ /* save return address */ ++ if (ctx->flags & SEEN_CALL) { ++ emit_store_stack_reg(r_ra, r_sp, real_off, ctx); ++ real_off += SZREG; ++ } ++ ++ /* Setup r_M leaving the alignment gap if necessary */ ++ if (ctx->flags & SEEN_MEM) { ++ if (real_off % (SZREG * 2)) ++ real_off += SZREG; ++ emit_long_instr(ctx, ADDIU, r_M, r_sp, real_off); ++ } ++} ++ ++static void restore_bpf_jit_regs(struct jit_ctx *ctx, ++ unsigned int offset) ++{ ++ int i, real_off = 0; ++ u32 sflags, tmp_flags; ++ ++ tmp_flags = sflags = ctx->flags >> SEEN_SREG_SFT; ++ /* sflags is a bitmap */ ++ i = 0; ++ while (tmp_flags) { ++ if ((sflags >> i) & 0x1) { ++ emit_load_stack_reg(MIPS_R_S0 + i, r_sp, real_off, ++ ctx); ++ real_off += SZREG; ++ } ++ i++; ++ tmp_flags >>= 1; ++ } ++ ++ /* restore return address */ ++ if (ctx->flags & SEEN_CALL) ++ emit_load_stack_reg(r_ra, r_sp, real_off, ctx); ++ ++ /* Restore the sp and discard the scrach memory */ ++ if (offset) ++ emit_stack_offset(align_sp(offset), ctx); ++} ++ ++static unsigned int get_stack_depth(struct jit_ctx *ctx) ++{ ++ int sp_off = 0; ++ ++ ++ /* How may s* regs do we need to preserved? */ ++ sp_off += hweight32(ctx->flags >> SEEN_SREG_SFT) * SZREG; ++ ++ if (ctx->flags & SEEN_MEM) ++ sp_off += 4 * BPF_MEMWORDS; /* BPF_MEMWORDS are 32-bit */ ++ ++ if (ctx->flags & SEEN_CALL) ++ sp_off += SZREG; /* Space for our ra register */ ++ ++ return sp_off; ++} ++ ++static void build_prologue(struct jit_ctx *ctx) ++{ ++ int sp_off; ++ ++ /* Calculate the total offset for the stack pointer */ ++ sp_off = get_stack_depth(ctx); ++ save_bpf_jit_regs(ctx, sp_off); ++ ++ if (ctx->flags & SEEN_SKB) ++ emit_reg_move(r_skb, MIPS_R_A0, ctx); ++ ++ if (ctx->flags & SEEN_SKB_DATA) { ++ /* Load packet length */ ++ emit_load(r_skb_len, r_skb, offsetof(struct sk_buff, len), ++ ctx); ++ emit_load(r_tmp, r_skb, offsetof(struct sk_buff, data_len), ++ ctx); ++ /* Load the data pointer */ ++ emit_load_ptr(r_skb_data, r_skb, ++ offsetof(struct sk_buff, data), ctx); ++ /* Load the header length */ ++ emit_subu(r_skb_hl, r_skb_len, r_tmp, ctx); ++ } ++ ++ if (ctx->flags & SEEN_X) ++ emit_jit_reg_move(r_X, r_zero, ctx); ++ ++ /* ++ * Do not leak kernel data to userspace, we only need to clear ++ * r_A if it is ever used. In fact if it is never used, we ++ * will not save/restore it, so clearing it in this case would ++ * corrupt the state of the caller. ++ */ ++ if (bpf_needs_clear_a(&ctx->skf->insns[0]) && ++ (ctx->flags & SEEN_A)) ++ emit_jit_reg_move(r_A, r_zero, ctx); ++} ++ ++static void build_epilogue(struct jit_ctx *ctx) ++{ ++ unsigned int sp_off; ++ ++ /* Calculate the total offset for the stack pointer */ ++ ++ sp_off = get_stack_depth(ctx); ++ restore_bpf_jit_regs(ctx, sp_off); ++ ++ /* Return */ ++ emit_jr(r_ra, ctx); ++ emit_nop(ctx); ++} ++ ++#define CHOOSE_LOAD_FUNC(K, func) \ ++ ((int)K < 0 ? ((int)K >= SKF_LL_OFF ? func##_negative : func) : \ ++ func##_positive) ++ ++static int build_body(struct jit_ctx *ctx) ++{ ++ const struct bpf_prog *prog = ctx->skf; ++ const struct sock_filter *inst; ++ unsigned int i, off, condt; ++ u32 k, b_off __maybe_unused; ++ u8 (*sk_load_func)(unsigned long *skb, int offset); ++ ++ for (i = 0; i < prog->len; i++) { ++ u16 code; ++ ++ inst = &(prog->insns[i]); ++ pr_debug("%s: code->0x%02x, jt->0x%x, jf->0x%x, k->0x%x\n", ++ __func__, inst->code, inst->jt, inst->jf, inst->k); ++ k = inst->k; ++ code = bpf_anc_helper(inst); ++ ++ if (ctx->target == NULL) ++ ctx->offsets[i] = ctx->idx * 4; ++ ++ switch (code) { ++ case BPF_LD | BPF_IMM: ++ /* A <- k ==> li r_A, k */ ++ ctx->flags |= SEEN_A; ++ emit_load_imm(r_A, k, ctx); ++ break; ++ case BPF_LD | BPF_W | BPF_LEN: ++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, len) != 4); ++ /* A <- len ==> lw r_A, offset(skb) */ ++ ctx->flags |= SEEN_SKB | SEEN_A; ++ off = offsetof(struct sk_buff, len); ++ emit_load(r_A, r_skb, off, ctx); ++ break; ++ case BPF_LD | BPF_MEM: ++ /* A <- M[k] ==> lw r_A, offset(M) */ ++ ctx->flags |= SEEN_MEM | SEEN_A; ++ emit_load(r_A, r_M, SCRATCH_OFF(k), ctx); ++ break; ++ case BPF_LD | BPF_W | BPF_ABS: ++ /* A <- P[k:4] */ ++ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_word); ++ goto load; ++ case BPF_LD | BPF_H | BPF_ABS: ++ /* A <- P[k:2] */ ++ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_half); ++ goto load; ++ case BPF_LD | BPF_B | BPF_ABS: ++ /* A <- P[k:1] */ ++ sk_load_func = CHOOSE_LOAD_FUNC(k, sk_load_byte); ++load: ++ emit_load_imm(r_off, k, ctx); ++load_common: ++ ctx->flags |= SEEN_CALL | SEEN_OFF | ++ SEEN_SKB | SEEN_A | SEEN_SKB_DATA; ++ ++ emit_load_func(r_s0, (ptr)sk_load_func, ctx); ++ emit_reg_move(MIPS_R_A0, r_skb, ctx); ++ emit_jalr(MIPS_R_RA, r_s0, ctx); ++ /* Load second argument to delay slot */ ++ emit_reg_move(MIPS_R_A1, r_off, ctx); ++ /* Check the error value */ ++ emit_bcond(MIPS_COND_EQ, r_ret, 0, b_imm(i + 1, ctx), ++ ctx); ++ /* Load return register on DS for failures */ ++ emit_reg_move(r_ret, r_zero, ctx); ++ /* Return with error */ ++ emit_b(b_imm(prog->len, ctx), ctx); ++ emit_nop(ctx); ++ break; ++ case BPF_LD | BPF_W | BPF_IND: ++ /* A <- P[X + k:4] */ ++ sk_load_func = sk_load_word; ++ goto load_ind; ++ case BPF_LD | BPF_H | BPF_IND: ++ /* A <- P[X + k:2] */ ++ sk_load_func = sk_load_half; ++ goto load_ind; ++ case BPF_LD | BPF_B | BPF_IND: ++ /* A <- P[X + k:1] */ ++ sk_load_func = sk_load_byte; ++load_ind: ++ ctx->flags |= SEEN_OFF | SEEN_X; ++ emit_addiu(r_off, r_X, k, ctx); ++ goto load_common; ++ case BPF_LDX | BPF_IMM: ++ /* X <- k */ ++ ctx->flags |= SEEN_X; ++ emit_load_imm(r_X, k, ctx); ++ break; ++ case BPF_LDX | BPF_MEM: ++ /* X <- M[k] */ ++ ctx->flags |= SEEN_X | SEEN_MEM; ++ emit_load(r_X, r_M, SCRATCH_OFF(k), ctx); ++ break; ++ case BPF_LDX | BPF_W | BPF_LEN: ++ /* X <- len */ ++ ctx->flags |= SEEN_X | SEEN_SKB; ++ off = offsetof(struct sk_buff, len); ++ emit_load(r_X, r_skb, off, ctx); ++ break; ++ case BPF_LDX | BPF_B | BPF_MSH: ++ /* X <- 4 * (P[k:1] & 0xf) */ ++ ctx->flags |= SEEN_X | SEEN_CALL | SEEN_SKB; ++ /* Load offset to a1 */ ++ emit_load_func(r_s0, (ptr)sk_load_byte, ctx); ++ /* ++ * This may emit two instructions so it may not fit ++ * in the delay slot. So use a0 in the delay slot. ++ */ ++ emit_load_imm(MIPS_R_A1, k, ctx); ++ emit_jalr(MIPS_R_RA, r_s0, ctx); ++ emit_reg_move(MIPS_R_A0, r_skb, ctx); /* delay slot */ ++ /* Check the error value */ ++ emit_bcond(MIPS_COND_NE, r_ret, 0, ++ b_imm(prog->len, ctx), ctx); ++ emit_reg_move(r_ret, r_zero, ctx); ++ /* We are good */ ++ /* X <- P[1:K] & 0xf */ ++ emit_andi(r_X, r_A, 0xf, ctx); ++ /* X << 2 */ ++ emit_b(b_imm(i + 1, ctx), ctx); ++ emit_sll(r_X, r_X, 2, ctx); /* delay slot */ ++ break; ++ case BPF_ST: ++ /* M[k] <- A */ ++ ctx->flags |= SEEN_MEM | SEEN_A; ++ emit_store(r_A, r_M, SCRATCH_OFF(k), ctx); ++ break; ++ case BPF_STX: ++ /* M[k] <- X */ ++ ctx->flags |= SEEN_MEM | SEEN_X; ++ emit_store(r_X, r_M, SCRATCH_OFF(k), ctx); ++ break; ++ case BPF_ALU | BPF_ADD | BPF_K: ++ /* A += K */ ++ ctx->flags |= SEEN_A; ++ emit_addiu(r_A, r_A, k, ctx); ++ break; ++ case BPF_ALU | BPF_ADD | BPF_X: ++ /* A += X */ ++ ctx->flags |= SEEN_A | SEEN_X; ++ emit_addu(r_A, r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_SUB | BPF_K: ++ /* A -= K */ ++ ctx->flags |= SEEN_A; ++ emit_addiu(r_A, r_A, -k, ctx); ++ break; ++ case BPF_ALU | BPF_SUB | BPF_X: ++ /* A -= X */ ++ ctx->flags |= SEEN_A | SEEN_X; ++ emit_subu(r_A, r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_MUL | BPF_K: ++ /* A *= K */ ++ /* Load K to scratch register before MUL */ ++ ctx->flags |= SEEN_A; ++ emit_load_imm(r_s0, k, ctx); ++ emit_mul(r_A, r_A, r_s0, ctx); ++ break; ++ case BPF_ALU | BPF_MUL | BPF_X: ++ /* A *= X */ ++ ctx->flags |= SEEN_A | SEEN_X; ++ emit_mul(r_A, r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_DIV | BPF_K: ++ /* A /= k */ ++ if (k == 1) ++ break; ++ if (optimize_div(&k)) { ++ ctx->flags |= SEEN_A; ++ emit_srl(r_A, r_A, k, ctx); ++ break; ++ } ++ ctx->flags |= SEEN_A; ++ emit_load_imm(r_s0, k, ctx); ++ emit_div(r_A, r_s0, ctx); ++ break; ++ case BPF_ALU | BPF_MOD | BPF_K: ++ /* A %= k */ ++ if (k == 1) { ++ ctx->flags |= SEEN_A; ++ emit_jit_reg_move(r_A, r_zero, ctx); ++ } else { ++ ctx->flags |= SEEN_A; ++ emit_load_imm(r_s0, k, ctx); ++ emit_mod(r_A, r_s0, ctx); ++ } ++ break; ++ case BPF_ALU | BPF_DIV | BPF_X: ++ /* A /= X */ ++ ctx->flags |= SEEN_X | SEEN_A; ++ /* Check if r_X is zero */ ++ emit_bcond(MIPS_COND_EQ, r_X, r_zero, ++ b_imm(prog->len, ctx), ctx); ++ emit_load_imm(r_ret, 0, ctx); /* delay slot */ ++ emit_div(r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_MOD | BPF_X: ++ /* A %= X */ ++ ctx->flags |= SEEN_X | SEEN_A; ++ /* Check if r_X is zero */ ++ emit_bcond(MIPS_COND_EQ, r_X, r_zero, ++ b_imm(prog->len, ctx), ctx); ++ emit_load_imm(r_ret, 0, ctx); /* delay slot */ ++ emit_mod(r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_OR | BPF_K: ++ /* A |= K */ ++ ctx->flags |= SEEN_A; ++ emit_ori(r_A, r_A, k, ctx); ++ break; ++ case BPF_ALU | BPF_OR | BPF_X: ++ /* A |= X */ ++ ctx->flags |= SEEN_A; ++ emit_ori(r_A, r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_XOR | BPF_K: ++ /* A ^= k */ ++ ctx->flags |= SEEN_A; ++ emit_xori(r_A, r_A, k, ctx); ++ break; ++ case BPF_ANC | SKF_AD_ALU_XOR_X: ++ case BPF_ALU | BPF_XOR | BPF_X: ++ /* A ^= X */ ++ ctx->flags |= SEEN_A; ++ emit_xor(r_A, r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_AND | BPF_K: ++ /* A &= K */ ++ ctx->flags |= SEEN_A; ++ emit_andi(r_A, r_A, k, ctx); ++ break; ++ case BPF_ALU | BPF_AND | BPF_X: ++ /* A &= X */ ++ ctx->flags |= SEEN_A | SEEN_X; ++ emit_and(r_A, r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_LSH | BPF_K: ++ /* A <<= K */ ++ ctx->flags |= SEEN_A; ++ emit_sll(r_A, r_A, k, ctx); ++ break; ++ case BPF_ALU | BPF_LSH | BPF_X: ++ /* A <<= X */ ++ ctx->flags |= SEEN_A | SEEN_X; ++ emit_sllv(r_A, r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_RSH | BPF_K: ++ /* A >>= K */ ++ ctx->flags |= SEEN_A; ++ emit_srl(r_A, r_A, k, ctx); ++ break; ++ case BPF_ALU | BPF_RSH | BPF_X: ++ ctx->flags |= SEEN_A | SEEN_X; ++ emit_srlv(r_A, r_A, r_X, ctx); ++ break; ++ case BPF_ALU | BPF_NEG: ++ /* A = -A */ ++ ctx->flags |= SEEN_A; ++ emit_neg(r_A, ctx); ++ break; ++ case BPF_JMP | BPF_JA: ++ /* pc += K */ ++ emit_b(b_imm(i + k + 1, ctx), ctx); ++ emit_nop(ctx); ++ break; ++ case BPF_JMP | BPF_JEQ | BPF_K: ++ /* pc += ( A == K ) ? pc->jt : pc->jf */ ++ condt = MIPS_COND_EQ | MIPS_COND_K; ++ goto jmp_cmp; ++ case BPF_JMP | BPF_JEQ | BPF_X: ++ ctx->flags |= SEEN_X; ++ /* pc += ( A == X ) ? pc->jt : pc->jf */ ++ condt = MIPS_COND_EQ | MIPS_COND_X; ++ goto jmp_cmp; ++ case BPF_JMP | BPF_JGE | BPF_K: ++ /* pc += ( A >= K ) ? pc->jt : pc->jf */ ++ condt = MIPS_COND_GE | MIPS_COND_K; ++ goto jmp_cmp; ++ case BPF_JMP | BPF_JGE | BPF_X: ++ ctx->flags |= SEEN_X; ++ /* pc += ( A >= X ) ? pc->jt : pc->jf */ ++ condt = MIPS_COND_GE | MIPS_COND_X; ++ goto jmp_cmp; ++ case BPF_JMP | BPF_JGT | BPF_K: ++ /* pc += ( A > K ) ? pc->jt : pc->jf */ ++ condt = MIPS_COND_GT | MIPS_COND_K; ++ goto jmp_cmp; ++ case BPF_JMP | BPF_JGT | BPF_X: ++ ctx->flags |= SEEN_X; ++ /* pc += ( A > X ) ? pc->jt : pc->jf */ ++ condt = MIPS_COND_GT | MIPS_COND_X; ++jmp_cmp: ++ /* Greater or Equal */ ++ if ((condt & MIPS_COND_GE) || ++ (condt & MIPS_COND_GT)) { ++ if (condt & MIPS_COND_K) { /* K */ ++ ctx->flags |= SEEN_A; ++ emit_sltiu(r_s0, r_A, k, ctx); ++ } else { /* X */ ++ ctx->flags |= SEEN_A | ++ SEEN_X; ++ emit_sltu(r_s0, r_A, r_X, ctx); ++ } ++ /* A < (K|X) ? r_scrach = 1 */ ++ b_off = b_imm(i + inst->jf + 1, ctx); ++ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ++ ctx); ++ emit_nop(ctx); ++ /* A > (K|X) ? scratch = 0 */ ++ if (condt & MIPS_COND_GT) { ++ /* Checking for equality */ ++ ctx->flags |= SEEN_A | SEEN_X; ++ if (condt & MIPS_COND_K) ++ emit_load_imm(r_s0, k, ctx); ++ else ++ emit_jit_reg_move(r_s0, r_X, ++ ctx); ++ b_off = b_imm(i + inst->jf + 1, ctx); ++ emit_bcond(MIPS_COND_EQ, r_A, r_s0, ++ b_off, ctx); ++ emit_nop(ctx); ++ /* Finally, A > K|X */ ++ b_off = b_imm(i + inst->jt + 1, ctx); ++ emit_b(b_off, ctx); ++ emit_nop(ctx); ++ } else { ++ /* A >= (K|X) so jump */ ++ b_off = b_imm(i + inst->jt + 1, ctx); ++ emit_b(b_off, ctx); ++ emit_nop(ctx); ++ } ++ } else { ++ /* A == K|X */ ++ if (condt & MIPS_COND_K) { /* K */ ++ ctx->flags |= SEEN_A; ++ emit_load_imm(r_s0, k, ctx); ++ /* jump true */ ++ b_off = b_imm(i + inst->jt + 1, ctx); ++ emit_bcond(MIPS_COND_EQ, r_A, r_s0, ++ b_off, ctx); ++ emit_nop(ctx); ++ /* jump false */ ++ b_off = b_imm(i + inst->jf + 1, ++ ctx); ++ emit_bcond(MIPS_COND_NE, r_A, r_s0, ++ b_off, ctx); ++ emit_nop(ctx); ++ } else { /* X */ ++ /* jump true */ ++ ctx->flags |= SEEN_A | SEEN_X; ++ b_off = b_imm(i + inst->jt + 1, ++ ctx); ++ emit_bcond(MIPS_COND_EQ, r_A, r_X, ++ b_off, ctx); ++ emit_nop(ctx); ++ /* jump false */ ++ b_off = b_imm(i + inst->jf + 1, ctx); ++ emit_bcond(MIPS_COND_NE, r_A, r_X, ++ b_off, ctx); ++ emit_nop(ctx); ++ } ++ } ++ break; ++ case BPF_JMP | BPF_JSET | BPF_K: ++ ctx->flags |= SEEN_A; ++ /* pc += (A & K) ? pc -> jt : pc -> jf */ ++ emit_load_imm(r_s1, k, ctx); ++ emit_and(r_s0, r_A, r_s1, ctx); ++ /* jump true */ ++ b_off = b_imm(i + inst->jt + 1, ctx); ++ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx); ++ emit_nop(ctx); ++ /* jump false */ ++ b_off = b_imm(i + inst->jf + 1, ctx); ++ emit_b(b_off, ctx); ++ emit_nop(ctx); ++ break; ++ case BPF_JMP | BPF_JSET | BPF_X: ++ ctx->flags |= SEEN_X | SEEN_A; ++ /* pc += (A & X) ? pc -> jt : pc -> jf */ ++ emit_and(r_s0, r_A, r_X, ctx); ++ /* jump true */ ++ b_off = b_imm(i + inst->jt + 1, ctx); ++ emit_bcond(MIPS_COND_NE, r_s0, r_zero, b_off, ctx); ++ emit_nop(ctx); ++ /* jump false */ ++ b_off = b_imm(i + inst->jf + 1, ctx); ++ emit_b(b_off, ctx); ++ emit_nop(ctx); ++ break; ++ case BPF_RET | BPF_A: ++ ctx->flags |= SEEN_A; ++ if (i != prog->len - 1) ++ /* ++ * If this is not the last instruction ++ * then jump to the epilogue ++ */ ++ emit_b(b_imm(prog->len, ctx), ctx); ++ emit_reg_move(r_ret, r_A, ctx); /* delay slot */ ++ break; ++ case BPF_RET | BPF_K: ++ /* ++ * It can emit two instructions so it does not fit on ++ * the delay slot. ++ */ ++ emit_load_imm(r_ret, k, ctx); ++ if (i != prog->len - 1) { ++ /* ++ * If this is not the last instruction ++ * then jump to the epilogue ++ */ ++ emit_b(b_imm(prog->len, ctx), ctx); ++ emit_nop(ctx); ++ } ++ break; ++ case BPF_MISC | BPF_TAX: ++ /* X = A */ ++ ctx->flags |= SEEN_X | SEEN_A; ++ emit_jit_reg_move(r_X, r_A, ctx); ++ break; ++ case BPF_MISC | BPF_TXA: ++ /* A = X */ ++ ctx->flags |= SEEN_A | SEEN_X; ++ emit_jit_reg_move(r_A, r_X, ctx); ++ break; ++ /* AUX */ ++ case BPF_ANC | SKF_AD_PROTOCOL: ++ /* A = ntohs(skb->protocol */ ++ ctx->flags |= SEEN_SKB | SEEN_OFF | SEEN_A; ++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, ++ protocol) != 2); ++ off = offsetof(struct sk_buff, protocol); ++ emit_half_load(r_A, r_skb, off, ctx); ++#ifdef CONFIG_CPU_LITTLE_ENDIAN ++ /* This needs little endian fixup */ ++ if (cpu_has_wsbh) { ++ /* R2 and later have the wsbh instruction */ ++ emit_wsbh(r_A, r_A, ctx); ++ } else { ++ /* Get first byte */ ++ emit_andi(r_tmp_imm, r_A, 0xff, ctx); ++ /* Shift it */ ++ emit_sll(r_tmp, r_tmp_imm, 8, ctx); ++ /* Get second byte */ ++ emit_srl(r_tmp_imm, r_A, 8, ctx); ++ emit_andi(r_tmp_imm, r_tmp_imm, 0xff, ctx); ++ /* Put everyting together in r_A */ ++ emit_or(r_A, r_tmp, r_tmp_imm, ctx); ++ } ++#endif ++ break; ++ case BPF_ANC | SKF_AD_CPU: ++ ctx->flags |= SEEN_A | SEEN_OFF; ++ /* A = current_thread_info()->cpu */ ++ BUILD_BUG_ON(FIELD_SIZEOF(struct thread_info, ++ cpu) != 4); ++ off = offsetof(struct thread_info, cpu); ++ /* $28/gp points to the thread_info struct */ ++ emit_load(r_A, 28, off, ctx); ++ break; ++ case BPF_ANC | SKF_AD_IFINDEX: ++ /* A = skb->dev->ifindex */ ++ case BPF_ANC | SKF_AD_HATYPE: ++ /* A = skb->dev->type */ ++ ctx->flags |= SEEN_SKB | SEEN_A; ++ off = offsetof(struct sk_buff, dev); ++ /* Load *dev pointer */ ++ emit_load_ptr(r_s0, r_skb, off, ctx); ++ /* error (0) in the delay slot */ ++ emit_bcond(MIPS_COND_EQ, r_s0, r_zero, ++ b_imm(prog->len, ctx), ctx); ++ emit_reg_move(r_ret, r_zero, ctx); ++ if (code == (BPF_ANC | SKF_AD_IFINDEX)) { ++ BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, ifindex) != 4); ++ off = offsetof(struct net_device, ifindex); ++ emit_load(r_A, r_s0, off, ctx); ++ } else { /* (code == (BPF_ANC | SKF_AD_HATYPE) */ ++ BUILD_BUG_ON(FIELD_SIZEOF(struct net_device, type) != 2); ++ off = offsetof(struct net_device, type); ++ emit_half_load_unsigned(r_A, r_s0, off, ctx); ++ } ++ break; ++ case BPF_ANC | SKF_AD_MARK: ++ ctx->flags |= SEEN_SKB | SEEN_A; ++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, mark) != 4); ++ off = offsetof(struct sk_buff, mark); ++ emit_load(r_A, r_skb, off, ctx); ++ break; ++ case BPF_ANC | SKF_AD_RXHASH: ++ ctx->flags |= SEEN_SKB | SEEN_A; ++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, hash) != 4); ++ off = offsetof(struct sk_buff, hash); ++ emit_load(r_A, r_skb, off, ctx); ++ break; ++ case BPF_ANC | SKF_AD_VLAN_TAG: ++ ctx->flags |= SEEN_SKB | SEEN_A; ++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, ++ vlan_tci) != 2); ++ off = offsetof(struct sk_buff, vlan_tci); ++ emit_half_load_unsigned(r_A, r_skb, off, ctx); ++ break; ++ case BPF_ANC | SKF_AD_VLAN_TAG_PRESENT: ++ ctx->flags |= SEEN_SKB | SEEN_A; ++ emit_load_byte(r_A, r_skb, PKT_VLAN_PRESENT_OFFSET(), ctx); ++ if (PKT_VLAN_PRESENT_BIT) ++ emit_srl(r_A, r_A, PKT_VLAN_PRESENT_BIT, ctx); ++ if (PKT_VLAN_PRESENT_BIT < 7) ++ emit_andi(r_A, r_A, 1, ctx); ++ break; ++ case BPF_ANC | SKF_AD_PKTTYPE: ++ ctx->flags |= SEEN_SKB; ++ ++ emit_load_byte(r_tmp, r_skb, PKT_TYPE_OFFSET(), ctx); ++ /* Keep only the last 3 bits */ ++ emit_andi(r_A, r_tmp, PKT_TYPE_MAX, ctx); ++#ifdef __BIG_ENDIAN_BITFIELD ++ /* Get the actual packet type to the lower 3 bits */ ++ emit_srl(r_A, r_A, 5, ctx); ++#endif ++ break; ++ case BPF_ANC | SKF_AD_QUEUE: ++ ctx->flags |= SEEN_SKB | SEEN_A; ++ BUILD_BUG_ON(FIELD_SIZEOF(struct sk_buff, ++ queue_mapping) != 2); ++ BUILD_BUG_ON(offsetof(struct sk_buff, ++ queue_mapping) > 0xff); ++ off = offsetof(struct sk_buff, queue_mapping); ++ emit_half_load_unsigned(r_A, r_skb, off, ctx); ++ break; ++ default: ++ pr_debug("%s: Unhandled opcode: 0x%02x\n", __FILE__, ++ inst->code); ++ return -1; ++ } ++ } ++ ++ /* compute offsets only during the first pass */ ++ if (ctx->target == NULL) ++ ctx->offsets[i] = ctx->idx * 4; ++ ++ return 0; ++} ++ ++void bpf_jit_compile(struct bpf_prog *fp) ++{ ++ struct jit_ctx ctx; ++ unsigned int alloc_size, tmp_idx; ++ ++ if (!bpf_jit_enable) ++ return; ++ ++ memset(&ctx, 0, sizeof(ctx)); ++ ++ ctx.offsets = kcalloc(fp->len + 1, sizeof(*ctx.offsets), GFP_KERNEL); ++ if (ctx.offsets == NULL) ++ return; ++ ++ ctx.skf = fp; ++ ++ if (build_body(&ctx)) ++ goto out; ++ ++ tmp_idx = ctx.idx; ++ build_prologue(&ctx); ++ ctx.prologue_bytes = (ctx.idx - tmp_idx) * 4; ++ /* just to complete the ctx.idx count */ ++ build_epilogue(&ctx); ++ ++ alloc_size = 4 * ctx.idx; ++ ctx.target = module_alloc(alloc_size); ++ if (ctx.target == NULL) ++ goto out; ++ ++ /* Clean it */ ++ memset(ctx.target, 0, alloc_size); ++ ++ ctx.idx = 0; ++ ++ /* Generate the actual JIT code */ ++ build_prologue(&ctx); ++ build_body(&ctx); ++ build_epilogue(&ctx); ++ ++ /* Update the icache */ ++ flush_icache_range((ptr)ctx.target, (ptr)(ctx.target + ctx.idx)); ++ ++ if (bpf_jit_enable > 1) ++ /* Dump JIT code */ ++ bpf_jit_dump(fp->len, alloc_size, 2, ctx.target); ++ ++ fp->bpf_func = (void *)ctx.target; ++ fp->jited = 1; ++ ++out: ++ kfree(ctx.offsets); ++} ++ ++void bpf_jit_free(struct bpf_prog *fp) ++{ ++ if (fp->jited) ++ module_memfree(fp->bpf_func); ++ ++ bpf_prog_unlock_free(fp); ++} +diff --git a/arch/mips/net/bpf_jit_asm.S b/arch/mips/net/bpf_jit_asm.S +new file mode 100644 +index 000000000000..57154c5883b6 +--- /dev/null ++++ b/arch/mips/net/bpf_jit_asm.S +@@ -0,0 +1,285 @@ ++/* ++ * bpf_jib_asm.S: Packet/header access helper functions for MIPS/MIPS64 BPF ++ * compiler. ++ * ++ * Copyright (C) 2015 Imagination Technologies Ltd. ++ * Author: Markos Chandras ++ * ++ * This program is free software; you can redistribute it and/or modify it ++ * under the terms of the GNU General Public License as published by the ++ * Free Software Foundation; version 2 of the License. ++ */ ++ ++#include ++#include ++#include ++#include "bpf_jit.h" ++ ++/* ABI ++ * ++ * r_skb_hl skb header length ++ * r_skb_data skb data ++ * r_off(a1) offset register ++ * r_A BPF register A ++ * r_X PF register X ++ * r_skb(a0) *skb ++ * r_M *scratch memory ++ * r_skb_le skb length ++ * r_s0 Scratch register 0 ++ * r_s1 Scratch register 1 ++ * ++ * On entry: ++ * a0: *skb ++ * a1: offset (imm or imm + X) ++ * ++ * All non-BPF-ABI registers are free for use. On return, we only ++ * care about r_ret. The BPF-ABI registers are assumed to remain ++ * unmodified during the entire filter operation. ++ */ ++ ++#define skb a0 ++#define offset a1 ++#define SKF_LL_OFF (-0x200000) /* Can't include linux/filter.h in assembly */ ++ ++ /* We know better :) so prevent assembler reordering etc */ ++ .set noreorder ++ ++#define is_offset_negative(TYPE) \ ++ /* If offset is negative we have more work to do */ \ ++ slti t0, offset, 0; \ ++ bgtz t0, bpf_slow_path_##TYPE##_neg; \ ++ /* Be careful what follows in DS. */ ++ ++#define is_offset_in_header(SIZE, TYPE) \ ++ /* Reading from header? */ \ ++ addiu $r_s0, $r_skb_hl, -SIZE; \ ++ slt t0, $r_s0, offset; \ ++ bgtz t0, bpf_slow_path_##TYPE; \ ++ ++LEAF(sk_load_word) ++ is_offset_negative(word) ++FEXPORT(sk_load_word_positive) ++ is_offset_in_header(4, word) ++ /* Offset within header boundaries */ ++ PTR_ADDU t1, $r_skb_data, offset ++ .set reorder ++ lw $r_A, 0(t1) ++ .set noreorder ++#ifdef CONFIG_CPU_LITTLE_ENDIAN ++# if MIPS_ISA_REV >= 2 ++ wsbh t0, $r_A ++ rotr $r_A, t0, 16 ++# else ++ sll t0, $r_A, 24 ++ srl t1, $r_A, 24 ++ srl t2, $r_A, 8 ++ or t0, t0, t1 ++ andi t2, t2, 0xff00 ++ andi t1, $r_A, 0xff00 ++ or t0, t0, t2 ++ sll t1, t1, 8 ++ or $r_A, t0, t1 ++# endif ++#endif ++ jr $r_ra ++ move $r_ret, zero ++ END(sk_load_word) ++ ++LEAF(sk_load_half) ++ is_offset_negative(half) ++FEXPORT(sk_load_half_positive) ++ is_offset_in_header(2, half) ++ /* Offset within header boundaries */ ++ PTR_ADDU t1, $r_skb_data, offset ++ lhu $r_A, 0(t1) ++#ifdef CONFIG_CPU_LITTLE_ENDIAN ++# if MIPS_ISA_REV >= 2 ++ wsbh $r_A, $r_A ++# else ++ sll t0, $r_A, 8 ++ srl t1, $r_A, 8 ++ andi t0, t0, 0xff00 ++ or $r_A, t0, t1 ++# endif ++#endif ++ jr $r_ra ++ move $r_ret, zero ++ END(sk_load_half) ++ ++LEAF(sk_load_byte) ++ is_offset_negative(byte) ++FEXPORT(sk_load_byte_positive) ++ is_offset_in_header(1, byte) ++ /* Offset within header boundaries */ ++ PTR_ADDU t1, $r_skb_data, offset ++ lbu $r_A, 0(t1) ++ jr $r_ra ++ move $r_ret, zero ++ END(sk_load_byte) ++ ++/* ++ * call skb_copy_bits: ++ * (prototype in linux/skbuff.h) ++ * ++ * int skb_copy_bits(sk_buff *skb, int offset, void *to, int len) ++ * ++ * o32 mandates we leave 4 spaces for argument registers in case ++ * the callee needs to use them. Even though we don't care about ++ * the argument registers ourselves, we need to allocate that space ++ * to remain ABI compliant since the callee may want to use that space. ++ * We also allocate 2 more spaces for $r_ra and our return register (*to). ++ * ++ * n64 is a bit different. The *caller* will allocate the space to preserve ++ * the arguments. So in 64-bit kernels, we allocate the 4-arg space for no ++ * good reason but it does not matter that much really. ++ * ++ * (void *to) is returned in r_s0 ++ * ++ */ ++#ifdef CONFIG_CPU_LITTLE_ENDIAN ++#define DS_OFFSET(SIZE) (4 * SZREG) ++#else ++#define DS_OFFSET(SIZE) ((4 * SZREG) + (4 - SIZE)) ++#endif ++#define bpf_slow_path_common(SIZE) \ ++ /* Quick check. Are we within reasonable boundaries? */ \ ++ LONG_ADDIU $r_s1, $r_skb_len, -SIZE; \ ++ sltu $r_s0, offset, $r_s1; \ ++ beqz $r_s0, fault; \ ++ /* Load 4th argument in DS */ \ ++ LONG_ADDIU a3, zero, SIZE; \ ++ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \ ++ PTR_LA t0, skb_copy_bits; \ ++ PTR_S $r_ra, (5 * SZREG)($r_sp); \ ++ /* Assign low slot to a2 */ \ ++ PTR_ADDIU a2, $r_sp, DS_OFFSET(SIZE); \ ++ jalr t0; \ ++ /* Reset our destination slot (DS but it's ok) */ \ ++ INT_S zero, (4 * SZREG)($r_sp); \ ++ /* \ ++ * skb_copy_bits returns 0 on success and -EFAULT \ ++ * on error. Our data live in a2. Do not bother with \ ++ * our data if an error has been returned. \ ++ */ \ ++ /* Restore our frame */ \ ++ PTR_L $r_ra, (5 * SZREG)($r_sp); \ ++ INT_L $r_s0, (4 * SZREG)($r_sp); \ ++ bltz v0, fault; \ ++ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \ ++ move $r_ret, zero; \ ++ ++NESTED(bpf_slow_path_word, (6 * SZREG), $r_sp) ++ bpf_slow_path_common(4) ++#ifdef CONFIG_CPU_LITTLE_ENDIAN ++# if MIPS_ISA_REV >= 2 ++ wsbh t0, $r_s0 ++ jr $r_ra ++ rotr $r_A, t0, 16 ++# else ++ sll t0, $r_s0, 24 ++ srl t1, $r_s0, 24 ++ srl t2, $r_s0, 8 ++ or t0, t0, t1 ++ andi t2, t2, 0xff00 ++ andi t1, $r_s0, 0xff00 ++ or t0, t0, t2 ++ sll t1, t1, 8 ++ jr $r_ra ++ or $r_A, t0, t1 ++# endif ++#else ++ jr $r_ra ++ move $r_A, $r_s0 ++#endif ++ ++ END(bpf_slow_path_word) ++ ++NESTED(bpf_slow_path_half, (6 * SZREG), $r_sp) ++ bpf_slow_path_common(2) ++#ifdef CONFIG_CPU_LITTLE_ENDIAN ++# if MIPS_ISA_REV >= 2 ++ jr $r_ra ++ wsbh $r_A, $r_s0 ++# else ++ sll t0, $r_s0, 8 ++ andi t1, $r_s0, 0xff00 ++ andi t0, t0, 0xff00 ++ srl t1, t1, 8 ++ jr $r_ra ++ or $r_A, t0, t1 ++# endif ++#else ++ jr $r_ra ++ move $r_A, $r_s0 ++#endif ++ ++ END(bpf_slow_path_half) ++ ++NESTED(bpf_slow_path_byte, (6 * SZREG), $r_sp) ++ bpf_slow_path_common(1) ++ jr $r_ra ++ move $r_A, $r_s0 ++ ++ END(bpf_slow_path_byte) ++ ++/* ++ * Negative entry points ++ */ ++ .macro bpf_is_end_of_data ++ li t0, SKF_LL_OFF ++ /* Reading link layer data? */ ++ slt t1, offset, t0 ++ bgtz t1, fault ++ /* Be careful what follows in DS. */ ++ .endm ++/* ++ * call skb_copy_bits: ++ * (prototype in linux/filter.h) ++ * ++ * void *bpf_internal_load_pointer_neg_helper(const struct sk_buff *skb, ++ * int k, unsigned int size) ++ * ++ * see above (bpf_slow_path_common) for ABI restrictions ++ */ ++#define bpf_negative_common(SIZE) \ ++ PTR_ADDIU $r_sp, $r_sp, -(6 * SZREG); \ ++ PTR_LA t0, bpf_internal_load_pointer_neg_helper; \ ++ PTR_S $r_ra, (5 * SZREG)($r_sp); \ ++ jalr t0; \ ++ li a2, SIZE; \ ++ PTR_L $r_ra, (5 * SZREG)($r_sp); \ ++ /* Check return pointer */ \ ++ beqz v0, fault; \ ++ PTR_ADDIU $r_sp, $r_sp, 6 * SZREG; \ ++ /* Preserve our pointer */ \ ++ move $r_s0, v0; \ ++ /* Set return value */ \ ++ move $r_ret, zero; \ ++ ++bpf_slow_path_word_neg: ++ bpf_is_end_of_data ++NESTED(sk_load_word_negative, (6 * SZREG), $r_sp) ++ bpf_negative_common(4) ++ jr $r_ra ++ lw $r_A, 0($r_s0) ++ END(sk_load_word_negative) ++ ++bpf_slow_path_half_neg: ++ bpf_is_end_of_data ++NESTED(sk_load_half_negative, (6 * SZREG), $r_sp) ++ bpf_negative_common(2) ++ jr $r_ra ++ lhu $r_A, 0($r_s0) ++ END(sk_load_half_negative) ++ ++bpf_slow_path_byte_neg: ++ bpf_is_end_of_data ++NESTED(sk_load_byte_negative, (6 * SZREG), $r_sp) ++ bpf_negative_common(1) ++ jr $r_ra ++ lbu $r_A, 0($r_s0) ++ END(sk_load_byte_negative) ++ ++fault: ++ jr $r_ra ++ addiu $r_ret, zero, 1 +-- +2.17.1 +