From: Daniel Golle Date: Fri, 10 Mar 2023 19:44:52 +0000 (+0000) Subject: mediatek: add support for built-in GE PHYs of newer SoCs X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a438a805ebe3f1aa6f25e31ee2152c60e3223343;p=openwrt%2Fstaging%2Flinusw.git mediatek: add support for built-in GE PHYs of newer SoCs MT7981 and the upcoming MT7988 have built-in Gigabit Ethernet PHYs. While they share some design properties with the PHYs present in MT753x, they do need calibration data from the SoC's efuse. Add driver to support them. Upstreaming it is planned, but there are still some ongoing discussions with MediaTek. Signed-off-by: Daniel Golle --- diff --git a/target/linux/mediatek/filogic/config-5.15 b/target/linux/mediatek/filogic/config-5.15 index 7e91f07065..ef528818b3 100644 --- a/target/linux/mediatek/filogic/config-5.15 +++ b/target/linux/mediatek/filogic/config-5.15 @@ -206,6 +206,7 @@ CONFIG_MDIO_BUS=y CONFIG_MDIO_DEVICE=y CONFIG_MDIO_DEVRES=y CONFIG_MEDIATEK_GE_PHY=y +CONFIG_MEDIATEK_GE_PHY_SOC=y CONFIG_MEDIATEK_WATCHDOG=y CONFIG_MEMFD_CREATE=y CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7 diff --git a/target/linux/mediatek/mt7622/config-5.15 b/target/linux/mediatek/mt7622/config-5.15 index 933de93099..14a0bec31a 100644 --- a/target/linux/mediatek/mt7622/config-5.15 +++ b/target/linux/mediatek/mt7622/config-5.15 @@ -232,6 +232,7 @@ CONFIG_MDIO_BUS=y CONFIG_MDIO_DEVICE=y CONFIG_MDIO_DEVRES=y CONFIG_MEDIATEK_GE_PHY=y +# CONFIG_MEDIATEK_GE_PHY_SOC is not set CONFIG_MEDIATEK_WATCHDOG=y CONFIG_MEMFD_CREATE=y CONFIG_MESSAGE_LOGLEVEL_DEFAULT=7 diff --git a/target/linux/mediatek/mt7623/config-5.15 b/target/linux/mediatek/mt7623/config-5.15 index 26d037ff00..fa99dd50bb 100644 --- a/target/linux/mediatek/mt7623/config-5.15 +++ b/target/linux/mediatek/mt7623/config-5.15 @@ -321,6 +321,7 @@ CONFIG_MDIO_DEVICE=y CONFIG_MDIO_DEVRES=y CONFIG_MDIO_GPIO=y CONFIG_MEDIATEK_GE_PHY=y +# CONFIG_MEDIATEK_GE_PHY_SOC is not set CONFIG_MEDIATEK_MT6577_AUXADC=y CONFIG_MEDIATEK_WATCHDOG=y CONFIG_MEMFD_CREATE=y diff --git a/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch new file mode 100644 index 0000000000..4909d9e922 --- /dev/null +++ b/target/linux/mediatek/patches-5.15/730-net-phy-add-driver-for-MediaTek-SoC-built-in-GE-PHYs.patch @@ -0,0 +1,1443 @@ +From a6f143af419bfc3f52d82e88ac033d9833e720af Mon Sep 17 00:00:00 2001 +From: Daniel Golle +Date: Mon, 13 Feb 2023 02:33:14 +0000 +Subject: [PATCH] net: phy: add driver for MediaTek SoC built-in GE PHYs + +Some of MediaTek's Filogic SoCs come with built-in gigabit Ethernet +PHYs which require calibration data from the SoC's efuse. +Add support for these PHYs to the mediatek-ge driver if built for +MediaTek's ARM64 SoCs. + +Signed-off-by: Daniel Golle +--- + MAINTAINERS | 8 + + drivers/net/phy/Kconfig | 12 + + drivers/net/phy/mediatek-ge.c | 1351 +++++++++++++++++++++++++++++++++ + 3 files changed, 1371 insertions(+) + +--- a/MAINTAINERS ++++ b/MAINTAINERS +@@ -11790,6 +11790,14 @@ L: netdev@vger.kernel.org + S: Maintained + F: drivers/net/ethernet/mediatek/ + ++MEDIATEK ETHERNET PHY DRIVERS ++M: Daniel Golle ++M: Qingfang Deng ++M: SkyLake Huang ++L: netdev@vger.kernel.org ++S: Maintained ++F: drivers/net/phy/mediatek-ge.c ++ + MEDIATEK I2C CONTROLLER DRIVER + M: Qii Wang + L: linux-i2c@vger.kernel.org +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -292,6 +292,18 @@ config MEDIATEK_GE_PHY + help + Supports the MediaTek Gigabit Ethernet PHYs. + ++config MEDIATEK_GE_PHY_SOC ++ bool "MediaTek SoC Ethernet PHYs" ++ depends on (ARM64 && ARCH_MEDIATEK && MEDIATEK_GE_PHY) || COMPILE_TEST ++ select NVMEM_MTK_EFUSE ++ help ++ Supports MediaTek SoC built-in Gigabit Ethernet PHYs. ++ ++ Include support for built-in Ethernet PHYs which are present in ++ the MT7981 and MT7988 SoCs. These PHYs need calibration data ++ present in the SoCs efuse and will dynamically calibrate VCM ++ (common-mode voltage) during startup. ++ + config MICREL_PHY + tristate "Micrel PHYs" + help +--- a/drivers/net/phy/mediatek-ge.c ++++ b/drivers/net/phy/mediatek-ge.c +@@ -1,6 +1,9 @@ + // SPDX-License-Identifier: GPL-2.0+ + #include + #include ++#include ++#include ++#include + #include + + #define MTK_EXT_PAGE_ACCESS 0x1f +@@ -11,6 +14,275 @@ + #define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30 + #define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5 + ++#define ANALOG_INTERNAL_OPERATION_MAX_US (20) ++#define ZCAL_CTRL_MIN (0) ++#define ZCAL_CTRL_MAX (63) ++#define TXRESERVE_MIN (0) ++#define TXRESERVE_MAX (7) ++ ++#define MTK_PHY_ANARG_RG (0x10) ++#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8) ++ ++/* Registers on MDIO_MMD_VEND1 */ ++enum { ++ MTK_PHY_MIDDLE_LEVEL_SHAPPER_0TO1 = 0, ++ MTK_PHY_1st_OVERSHOOT_LEVEL_0TO1, ++ MTK_PHY_2nd_OVERSHOOT_LEVEL_0TO1, ++ MTK_PHY_MIDDLE_LEVEL_SHAPPER_1TO0, ++ MTK_PHY_1st_OVERSHOOT_LEVEL_1TO0, ++ MTK_PHY_2nd_OVERSHOOT_LEVEL_1TO0, ++ MTK_PHY_MIDDLE_LEVEL_SHAPPER_0TON1, /* N means negative */ ++ MTK_PHY_1st_OVERSHOOT_LEVEL_0TON1, ++ MTK_PHY_2nd_OVERSHOOT_LEVEL_0TON1, ++ MTK_PHY_MIDDLE_LEVEL_SHAPPER_N1TO0, ++ MTK_PHY_1st_OVERSHOOT_LEVEL_N1TO0, ++ MTK_PHY_2nd_OVERSHOOT_LEVEL_N1TO0, ++ MTK_PHY_TX_MLT3_END, ++}; ++ ++#define MTK_PHY_TXVLD_DA_RG (0x12) ++#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10) ++#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 (0x16) ++#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10) ++#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 (0x17) ++#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 (0x18) ++#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 (0x19) ++#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 (0x20) ++#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 (0x21) ++#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 (0x22) ++#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8) ++#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_TANA_CAL_MODE (0xc1) ++#define MTK_PHY_TANA_CAL_MODE_SHIFT (8) ++ ++#define MTK_PHY_RXADC_CTRL_RG7 (0xc6) ++#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8) ++ ++#define MTK_PHY_RXADC_CTRL_RG9 (0xc8) ++#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12) ++#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8) ++#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4) ++#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0) ++ ++#define MTK_PHY_LDO_OUTPUT_V (0xd7) ++ ++#define MTK_PHY_RG_ANA_CAL_RG0 (0xdb) ++#define MTK_PHY_RG_CAL_CKINV BIT(12) ++#define MTK_PHY_RG_ANA_CALEN BIT(8) ++#define MTK_PHY_RG_REXT_CALEN BIT(4) ++#define MTK_PHY_RG_ZCALEN_A BIT(0) ++ ++#define MTK_PHY_RG_ANA_CAL_RG1 (0xdc) ++#define MTK_PHY_RG_ZCALEN_B BIT(12) ++#define MTK_PHY_RG_ZCALEN_C BIT(8) ++#define MTK_PHY_RG_ZCALEN_D BIT(4) ++#define MTK_PHY_RG_TXVOS_CALEN BIT(0) ++ ++#define MTK_PHY_RG_ANA_CAL_RG2 (0xdd) ++#define MTK_PHY_RG_TXG_CALEN_A BIT(12) ++#define MTK_PHY_RG_TXG_CALEN_B BIT(8) ++#define MTK_PHY_RG_TXG_CALEN_C BIT(4) ++#define MTK_PHY_RG_TXG_CALEN_D BIT(0) ++ ++#define MTK_PHY_RG_ANA_CAL_RG5 (0xe0) ++#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8) ++#define MTK_PHY_RG_ZCAL_CTRL_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_RG_TX_FILTER (0xfe) ++ ++#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B (0x172) ++#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8) ++#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0) ++ ++#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D (0x173) ++#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8) ++#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0) ++ ++#define MTK_PHY_RG_AD_CAL_COMP (0x17a) ++#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8) ++ ++#define MTK_PHY_RG_AD_CAL_CLK (0x17b) ++#define MTK_PHY_DA_CAL_CLK BIT(0) ++ ++#define MTK_PHY_RG_AD_CALIN (0x17c) ++#define MTK_PHY_DA_CALIN_FLAG BIT(0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN0_A (0x17d) ++#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN0_B (0x17e) ++#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN0_C (0x17f) ++#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN0_D (0x180) ++#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN1_A (0x181) ++#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN1_B (0x182) ++#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN1_C (0x183) ++#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_DASN_DAC_IN1_D (0x180) ++#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0) ++ ++#define MTK_PHY_RG_LP_IIR2_K1_L (0x22a) ++#define MTK_PHY_RG_LP_IIR2_K1_U (0x22b) ++#define MTK_PHY_RG_LP_IIR2_K2_L (0x22c) ++#define MTK_PHY_RG_LP_IIR2_K2_U (0x22d) ++#define MTK_PHY_RG_LP_IIR2_K3_L (0x22e) ++#define MTK_PHY_RG_LP_IIR2_K3_U (0x22f) ++#define MTK_PHY_RG_LP_IIR2_K4_L (0x230) ++#define MTK_PHY_RG_LP_IIR2_K4_U (0x231) ++#define MTK_PHY_RG_LP_IIR2_K5_L (0x232) ++#define MTK_PHY_RG_LP_IIR2_K5_U (0x233) ++ ++#define MTK_PHY_RG_DEV1E_REG234 (0x234) ++#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0) ++#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4) ++ ++#define MTK_PHY_RG_LPF_CNT_VAL (0x235) ++ ++#define MTK_PHY_RG_DEV1E_REG27C (0x27c) ++#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8) ++#define MTK_PHY_RG_DEV1E_REG27D (0x27d) ++#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0) ++ ++#define MTK_PHY_LDO_PUMP_EN_PAIRAB (0x502) ++#define MTK_PHY_LDO_PUMP_EN_PAIRCD (0x503) ++ ++#define MTK_PHY_DA_TX_R50_PAIR_A (0x53d) ++#define MTK_PHY_DA_TX_R50_PAIR_B (0x53e) ++#define MTK_PHY_DA_TX_R50_PAIR_C (0x53f) ++#define MTK_PHY_DA_TX_R50_PAIR_D (0x540) ++ ++/* Registers on MDIO_MMD_VEND2 */ ++#define MTK_PHY_LED0_ON_CTRL (0x24) ++#define MTK_PHY_LED0_ON_MASK GENMASK(6, 0) ++#define MTK_PHY_LED0_ON_LINK1000 BIT(0) ++#define MTK_PHY_LED0_ON_LINK100 BIT(1) ++#define MTK_PHY_LED0_ON_LINK10 BIT(2) ++#define MTK_PHY_LED0_ON_LINKDOWN BIT(3) ++#define MTK_PHY_LED0_ON_FDX BIT(4) /* Full duplex */ ++#define MTK_PHY_LED0_ON_HDX BIT(5) /* Half duplex */ ++#define MTK_PHY_LED0_FORCE_ON BIT(6) ++#define MTK_PHY_LED0_POLARITY BIT(14) ++#define MTK_PHY_LED0_ENABLE BIT(15) ++ ++#define MTK_PHY_LED0_BLINK_CTRL (0x25) ++#define MTK_PHY_LED0_1000TX BIT(0) ++#define MTK_PHY_LED0_1000RX BIT(1) ++#define MTK_PHY_LED0_100TX BIT(2) ++#define MTK_PHY_LED0_100RX BIT(3) ++#define MTK_PHY_LED0_10TX BIT(4) ++#define MTK_PHY_LED0_10RX BIT(5) ++#define MTK_PHY_LED0_COLLISION BIT(6) ++#define MTK_PHY_LED0_RX_CRC_ERR BIT(7) ++#define MTK_PHY_LED0_RX_IDLE_ERR BIT(8) ++#define MTK_PHY_LED0_FORCE_BLINK BIT(9) ++ ++#define MTK_PHY_ANA_TEST_BUS_CTRL_RG (0x100) ++#define MTK_PHY_ANA_TEST_MODE_MASK GENMASK(15, 8) ++ ++#define MTK_PHY_RG_DASN_TXT_DMY2 (0x110) ++#define MTK_PHY_TST_DMY2_MASK GENMASK(5, 0) ++ ++#define MTK_PHY_RG_BG_RASEL (0x115) ++#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0) ++ ++/* These macro privides efuse parsing for internal phy. */ ++#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0)) ++#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0)) ++#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0)) ++#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0)) ++#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0)) ++ ++#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0)) ++#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0)) ++#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0)) ++#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0)) ++#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0)) ++ ++#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0)) ++#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0)) ++#define EFS_DA_TX_R50_A_10M(x) (((x) >> 12) & GENMASK(5, 0)) ++#define EFS_DA_TX_R50_B_10M(x) (((x) >> 18) & GENMASK(5, 0)) ++ ++#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0)) ++#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0)) ++ ++enum { ++ NO_PAIR, ++ PAIR_A, ++ PAIR_B, ++ PAIR_C, ++ PAIR_D, ++}; ++ ++enum { ++ GPHY_PORT0, ++ GPHY_PORT1, ++ GPHY_PORT2, ++ GPHY_PORT3, ++}; ++ ++enum calibration_mode { ++ EFUSE_K, ++ SW_K ++}; ++ ++enum CAL_ITEM { ++ REXT, ++ TX_OFFSET, ++ TX_AMP, ++ TX_R50, ++ TX_VCM ++}; ++ ++enum CAL_MODE { ++ SW_EFUSE_M, ++ EFUSE_M, ++ SW_M ++}; ++ ++const u8 mt798x_zcal_to_r50[64] = { ++ 7, 8, 9, 9, 10, 10, 11, 11, ++ 12, 13, 13, 14, 14, 15, 16, 16, ++ 17, 18, 18, 19, 20, 21, 21, 22, ++ 23, 24, 24, 25, 26, 27, 28, 29, ++ 30, 31, 32, 33, 34, 35, 36, 37, ++ 38, 40, 41, 42, 43, 45, 46, 48, ++ 49, 51, 52, 54, 55, 57, 59, 61, ++ 62, 63, 63, 63, 63, 63, 63, 63 ++}; ++ ++const char pair[4] = {'A', 'B', 'C', 'D'}; ++ + static int mtk_gephy_read_page(struct phy_device *phydev) + { + return __phy_read(phydev, MTK_EXT_PAGE_ACCESS); +@@ -68,6 +340,1059 @@ static int mt7531_phy_config_init(struct + return 0; + } + ++#ifdef CONFIG_MEDIATEK_GE_PHY_SOC ++/* One calibration cycle consists of: ++ * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high ++ * until AD_CAL_COMP is ready to output calibration result. ++ * 2.Wait until DA_CAL_CLK is available. ++ * 3.Fetch AD_CAL_COMP_OUT. ++ */ ++static int cal_cycle(struct phy_device *phydev, int devad, ++ u32 regnum, u16 mask, u16 cal_val) ++{ ++ unsigned long timeout; ++ int reg_val; ++ int ret; ++ ++ phy_modify_mmd(phydev, devad, regnum, ++ mask, cal_val); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN, ++ MTK_PHY_DA_CALIN_FLAG); ++ ++ timeout = jiffies + usecs_to_jiffies(ANALOG_INTERNAL_OPERATION_MAX_US); ++ do { ++ reg_val = phy_read_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_AD_CAL_CLK); ++ } while (time_before(jiffies, timeout) && !(reg_val & BIT(0))); ++ ++ if (!(reg_val & BIT(0))) { ++ dev_err(&phydev->mdio.dev, "Calibration cycle timeout\n"); ++ return -ETIMEDOUT; ++ } ++ ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN, ++ MTK_PHY_DA_CALIN_FLAG); ++ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >> ++ MTK_PHY_AD_CAL_COMP_OUT_SHIFT; ++ dev_dbg(&phydev->mdio.dev, "cal_val: 0x%x, ret: %d\n", cal_val, ret); ++ ++ return ret; ++} ++ ++static int rext_fill_result(struct phy_device *phydev, u16 *buf) ++{ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL, ++ MTK_PHY_RG_BG_RASEL_MASK, buf[1]); ++ ++ return 0; ++} ++ ++static int rext_cal_efuse(struct phy_device *phydev, u32 *buf) ++{ ++ u16 rext_cal_val[2]; ++ ++ rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]); ++ rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]); ++ rext_fill_result(phydev, rext_cal_val); ++ ++ return 0; ++} ++ ++static int rext_cal_sw(struct phy_device *phydev) ++{ ++ u8 rg_zcal_ctrl_def; ++ u8 zcal_lower, zcal_upper, rg_zcal_ctrl; ++ u8 lower_ret, upper_ret; ++ u16 rext_cal_val[2]; ++ int ret; ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_ANA_TEST_BUS_CTRL_RG, ++ MTK_PHY_ANA_TEST_MODE_MASK, MTK_PHY_TANA_CAL_MODE << 8); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_TXVOS_CALEN); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_CAL_CKINV | MTK_PHY_RG_ANA_CALEN | ++ MTK_PHY_RG_REXT_CALEN); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_DASN_TXT_DMY2, ++ MTK_PHY_TST_DMY2_MASK, 0x1); ++ ++ rg_zcal_ctrl_def = phy_read_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG5) & ++ MTK_PHY_RG_ZCAL_CTRL_MASK; ++ zcal_lower = ZCAL_CTRL_MIN; ++ zcal_upper = ZCAL_CTRL_MAX; ++ ++ dev_dbg(&phydev->mdio.dev, "Start REXT SW cal.\n"); ++ while ((zcal_upper - zcal_lower) > 1) { ++ rg_zcal_ctrl = DIV_ROUND_CLOSEST(zcal_lower + zcal_upper, 2); ++ ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_ZCAL_CTRL_MASK, rg_zcal_ctrl); ++ if (ret == 1) { ++ zcal_upper = rg_zcal_ctrl; ++ upper_ret = ret; ++ } else if (ret == 0) { ++ zcal_lower = rg_zcal_ctrl; ++ lower_ret = ret; ++ } else { ++ goto restore; ++ } ++ } ++ ++ if (zcal_lower == ZCAL_CTRL_MIN) { ++ lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_ZCAL_CTRL_MASK, zcal_lower); ++ ret = lower_ret; ++ } else if (zcal_upper == ZCAL_CTRL_MAX) { ++ upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_ZCAL_CTRL_MASK, zcal_upper); ++ ret = upper_ret; ++ } ++ if (ret < 0) ++ goto restore; ++ ++ ret = upper_ret - lower_ret; ++ if (ret == 1) { ++ rext_cal_val[0] = zcal_upper; ++ rext_cal_val[1] = zcal_upper >> 3; ++ rext_fill_result(phydev, rext_cal_val); ++ dev_info(&phydev->mdio.dev, "REXT SW cal result: 0x%x\n", ++ zcal_upper); ++ ret = 0; ++ } else { ++ ret = -EINVAL; ++ } ++ ++restore: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, ++ MTK_PHY_ANA_TEST_BUS_CTRL_RG, ++ MTK_PHY_ANA_TEST_MODE_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_CAL_CKINV | MTK_PHY_RG_ANA_CALEN | ++ MTK_PHY_RG_REXT_CALEN); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_DASN_TXT_DMY2, ++ MTK_PHY_TST_DMY2_MASK); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_ZCAL_CTRL_MASK, rg_zcal_ctrl_def); ++ ++ return ret; ++} ++ ++static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf) ++{ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B, ++ MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B, ++ MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D, ++ MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D, ++ MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]); ++ ++ return 0; ++} ++ ++static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf) ++{ ++ u16 tx_offset_cal_val[4]; ++ ++ tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]); ++ tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]); ++ tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]); ++ tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]); ++ ++ tx_offset_fill_result(phydev, tx_offset_cal_val); ++ ++ return 0; ++} ++ ++static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf) ++{ ++ int i; ++ int bias[16] = {0}; ++ const int vals_9461[16] = { 7, 1, 4, 7, ++ 7, 1, 4, 7, ++ 7, 1, 4, 7, ++ 7, 1, 4, 7 }; ++ const int vals_9481[16] = { 10, 6, 6, 10, ++ 10, 6, 6, 10, ++ 10, 6, 6, 10, ++ 10, 6, 6, 10 }; ++ ++ switch (phydev->drv->phy_id) { ++ case 0x03a29461: ++ /* We add some calibration to efuse values ++ * due to board level influence. ++ * GBE: +7, TBT: +1, HBT: +4, TST: +7 ++ */ ++ memcpy(bias, (const void *)vals_9461, sizeof(bias)); ++ for (i = 0; i <= 12; i += 4) { ++ if (likely(buf[i >> 2] + bias[i] >= 32)) { ++ bias[i] -= 13; ++ } else { ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, ++ 0x5c, 0x7 << i, bias[i] << i); ++ bias[i + 1] += 13; ++ bias[i + 2] += 13; ++ bias[i + 3] += 13; ++ } ++ } ++ break; ++ case 0x03a29481: ++ memcpy(bias, (const void *)vals_9481, sizeof(bias)); ++ break; ++ default: ++ break; ++ } ++ ++ /* Prevent overflow */ ++ for (i = 0; i < 12; i++) { ++ if (buf[i >> 2] + bias[i] > 63) { ++ buf[i >> 2] = 63; ++ bias[i] = 0; ++ } else if (buf[i >> 2] + bias[i] < 0) { ++ /* Bias caused by board design may change in the future. ++ * So check negative cases, too. ++ */ ++ buf[i >> 2] = 0; ++ bias[i] = 0; ++ } ++ } ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG, ++ MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG, ++ MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2, ++ MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2, ++ MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1, ++ MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1, ++ MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2, ++ MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2, ++ MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1, ++ MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1, ++ MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2, ++ MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2, ++ MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]); ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1, ++ MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1, ++ MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2, ++ MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2, ++ MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]); ++ ++ return 0; ++} ++ ++static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf) ++{ ++ u16 tx_amp_cal_val[4]; ++ ++ tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]); ++ tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]); ++ tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]); ++ tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]); ++ tx_amp_fill_result(phydev, tx_amp_cal_val); ++ ++ return 0; ++} ++ ++static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val, ++ u8 txg_calen_x) ++{ ++ int bias = 0; ++ u16 reg, val; ++ ++ switch (phydev->drv->phy_id) { ++ case 0x03a29481: ++ { ++ bias = -2; ++ break; ++ } ++ /* 0x03a29461 enters default case */ ++ default: ++ break; ++ } ++ ++ val = clamp_val(bias + tx_r50_cal_val, 0, 63); ++ ++ switch (txg_calen_x) { ++ case PAIR_A: ++ reg = MTK_PHY_DA_TX_R50_PAIR_A; ++ break; ++ case PAIR_B: ++ reg = MTK_PHY_DA_TX_R50_PAIR_B; ++ break; ++ case PAIR_C: ++ reg = MTK_PHY_DA_TX_R50_PAIR_C; ++ break; ++ case PAIR_D: ++ reg = MTK_PHY_DA_TX_R50_PAIR_D; ++ break; ++ } ++ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8); ++ ++ return 0; ++} ++ ++static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf, ++ u8 txg_calen_x) ++{ ++ u16 tx_r50_cal_val; ++ ++ switch (txg_calen_x) { ++ case PAIR_A: ++ tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]); ++ break; ++ case PAIR_B: ++ tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]); ++ break; ++ case PAIR_C: ++ tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]); ++ break; ++ case PAIR_D: ++ tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]); ++ break; ++ } ++ tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x); ++ ++ return 0; ++} ++ ++static int tx_r50_cal_sw(struct phy_device *phydev, u8 txg_calen_x) ++{ ++ u8 zcal_lower, zcal_upper, rg_zcal_ctrl; ++ u8 lower_ret, upper_ret; ++ u8 rg_zcal_ctrl_def; ++ u16 tx_r50_cal_val; ++ int ret; ++ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_ANA_TEST_BUS_CTRL_RG, ++ MTK_PHY_ANA_TEST_MODE_MASK, MTK_PHY_TANA_CAL_MODE << 8); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_TXVOS_CALEN); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_CAL_CKINV | MTK_PHY_RG_ANA_CALEN); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG2, ++ BIT(txg_calen_x * 4)); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_DASN_TXT_DMY2, ++ MTK_PHY_TST_DMY2_MASK, 0x1); ++ ++ rg_zcal_ctrl_def = phy_read_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG5) & ++ MTK_PHY_RG_ZCAL_CTRL_MASK; ++ zcal_lower = ZCAL_CTRL_MIN; ++ zcal_upper = ZCAL_CTRL_MAX; ++ ++ dev_dbg(&phydev->mdio.dev, "Start TX-R50 Pair%c SW cal.\n", ++ pair[txg_calen_x]); ++ while ((zcal_upper - zcal_lower) > 1) { ++ rg_zcal_ctrl = DIV_ROUND_CLOSEST(zcal_lower + zcal_upper, 2); ++ ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_ZCAL_CTRL_MASK, rg_zcal_ctrl); ++ if (ret == 1) { ++ zcal_upper = rg_zcal_ctrl; ++ upper_ret = ret; ++ } else if (ret == 0) { ++ zcal_lower = rg_zcal_ctrl; ++ lower_ret = ret; ++ } else { ++ goto restore; ++ } ++ } ++ ++ if (zcal_lower == ZCAL_CTRL_MIN) { ++ lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_ZCAL_CTRL_MASK, zcal_lower); ++ ret = lower_ret; ++ } else if (zcal_upper == ZCAL_CTRL_MAX) { ++ upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_ZCAL_CTRL_MASK, zcal_upper); ++ ret = upper_ret; ++ } ++ if (ret < 0) ++ goto restore; ++ ++ ret = upper_ret - lower_ret; ++ if (ret == 1) { ++ tx_r50_cal_val = mt798x_zcal_to_r50[zcal_upper]; ++ tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x); ++ dev_info(&phydev->mdio.dev, ++ "TX-R50 Pair%c SW cal result: 0x%x\n", ++ pair[txg_calen_x], zcal_lower); ++ ret = 0; ++ } else { ++ ret = -EINVAL; ++ } ++ ++restore: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_ANA_TEST_BUS_CTRL_RG, ++ MTK_PHY_ANA_TEST_MODE_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_CAL_CKINV | MTK_PHY_RG_ANA_CALEN); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG2, ++ BIT(txg_calen_x * 4)); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_DASN_TXT_DMY2, ++ MTK_PHY_TST_DMY2_MASK); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5, ++ MTK_PHY_RG_ZCAL_CTRL_MASK, rg_zcal_ctrl_def); ++ ++ return ret; ++} ++ ++static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x) ++{ ++ u8 lower_idx, upper_idx, txreserve_val; ++ u8 lower_ret, upper_ret; ++ int ret; ++ ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_ANA_CALEN); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_CAL_CKINV); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_TXVOS_CALEN); ++ ++ switch (rg_txreserve_x) { ++ case PAIR_A: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN0_A, ++ MTK_PHY_DASN_DAC_IN0_A_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN1_A, ++ MTK_PHY_DASN_DAC_IN1_A_MASK); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_ZCALEN_A); ++ break; ++ case PAIR_B: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN0_B, ++ MTK_PHY_DASN_DAC_IN0_B_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN1_B, ++ MTK_PHY_DASN_DAC_IN1_B_MASK); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_ZCALEN_B); ++ break; ++ case PAIR_C: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN0_C, ++ MTK_PHY_DASN_DAC_IN0_C_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN1_C, ++ MTK_PHY_DASN_DAC_IN1_C_MASK); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_ZCALEN_C); ++ break; ++ case PAIR_D: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN0_D, ++ MTK_PHY_DASN_DAC_IN0_D_MASK); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_DASN_DAC_IN1_D, ++ MTK_PHY_DASN_DAC_IN1_D_MASK); ++ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_ZCALEN_D); ++ break; ++ default: ++ ret = -EINVAL; ++ goto restore; ++ } ++ ++ lower_idx = TXRESERVE_MIN; ++ upper_idx = TXRESERVE_MAX; ++ ++ dev_dbg(&phydev->mdio.dev, "Start TX-VCM SW cal.\n"); ++ while ((upper_idx - lower_idx) > 1) { ++ txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2); ++ ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ txreserve_val << 12 | txreserve_val << 8 | ++ txreserve_val << 4 | txreserve_val); ++ if (ret == 1) { ++ upper_idx = txreserve_val; ++ upper_ret = ret; ++ } else if (ret == 0) { ++ lower_idx = txreserve_val; ++ lower_ret = ret; ++ } else { ++ goto restore; ++ } ++ } ++ ++ if (lower_idx == TXRESERVE_MIN) { ++ lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ lower_idx << 12 | lower_idx << 8 | ++ lower_idx << 4 | lower_idx); ++ ret = lower_ret; ++ } else if (upper_idx == TXRESERVE_MAX) { ++ upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1, ++ MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ upper_idx << 12 | upper_idx << 8 | ++ upper_idx << 4 | upper_idx); ++ ret = upper_ret; ++ } ++ if (ret < 0) ++ goto restore; ++ ++ /* We calibrate TX-VCM in different logic. Check upper index and then ++ * lower index. If this calibration is valid, apply lower index's result. ++ */ ++ ret = upper_ret - lower_ret; ++ if (ret == 1) { ++ ret = 0; ++ /* Make sure we use upper_idx in our calibration system */ ++ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ upper_idx << 12 | upper_idx << 8 | ++ upper_idx << 4 | upper_idx); ++ dev_info(&phydev->mdio.dev, "TX-VCM SW cal result: 0x%x\n", ++ upper_idx); ++ } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 && ++ lower_ret == 1) { ++ ret = 0; ++ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9, ++ MTK_PHY_DA_RX_PSBN_TBT_MASK | ++ MTK_PHY_DA_RX_PSBN_HBT_MASK | ++ MTK_PHY_DA_RX_PSBN_GBE_MASK | ++ MTK_PHY_DA_RX_PSBN_LP_MASK, ++ lower_idx << 12 | lower_idx << 8 | ++ lower_idx << 4 | lower_idx); ++ dev_warn(&phydev->mdio.dev, ++ "TX-VCM SW cal result at low margin 0x%x\n", ++ lower_idx); ++ } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 && ++ lower_ret == 0) { ++ ret = 0; ++ dev_warn(&phydev->mdio.dev, ++ "TX-VCM SW cal result at high margin 0x%x\n", ++ upper_idx); ++ } else { ++ ret = -EINVAL; ++ } ++ ++restore: ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_ANA_CALEN); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_TXVOS_CALEN); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0, ++ MTK_PHY_RG_ZCALEN_A); ++ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1, ++ MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C | ++ MTK_PHY_RG_ZCALEN_D); ++ ++ return ret; ++} ++ ++static inline void mt7981_phy_finetune(struct phy_device *phydev) ++{ ++ u32 i; ++ ++ /* 100M eye finetune: ++ * Keep middle level of TX MLT3 shapper as default. ++ * Only change TX MLT3 overshoot level here. ++ */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_1st_OVERSHOOT_LEVEL_0TO1, ++ 0x1ce); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_2nd_OVERSHOOT_LEVEL_0TO1, ++ 0x1c1); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_1st_OVERSHOOT_LEVEL_1TO0, ++ 0x20f); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_2nd_OVERSHOOT_LEVEL_1TO0, ++ 0x202); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_1st_OVERSHOOT_LEVEL_0TON1, ++ 0x3d0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_2nd_OVERSHOOT_LEVEL_0TON1, ++ 0x3c0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_1st_OVERSHOOT_LEVEL_N1TO0, ++ 0x13); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_2nd_OVERSHOOT_LEVEL_N1TO0, ++ 0x5); ++ ++ /* TX-AMP finetune: ++ * 100M +4, 1000M +6 to default value. ++ * If efuse values aren't valid, TX-AMP uses the below values. ++ */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG, 0x9824); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2, ++ 0x9026); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1, ++ 0x2624); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2, ++ 0x2426); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1, ++ 0x2624); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2, ++ 0x2426); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1, ++ 0x2624); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2, ++ 0x2426); ++ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); ++ /* EnabRandUpdTrig = 1 */ ++ __phy_write(phydev, 0x11, 0x2f00); ++ __phy_write(phydev, 0x12, 0xe); ++ __phy_write(phydev, 0x10, 0x8fb0); ++ ++ /* SlvDSPreadyTime = 0xc */ ++ __phy_write(phydev, 0x11, 0x671); ++ __phy_write(phydev, 0x12, 0xc); ++ __phy_write(phydev, 0x10, 0x8fae); ++ ++ /* NormMseLoThresh = 85 */ ++ __phy_write(phydev, 0x11, 0x55a0); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x83aa); ++ ++ /* InhibitDisableDfeTail1000 = 1 */ ++ __phy_write(phydev, 0x11, 0x2b); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x8f80); ++ ++ /* SSTr related */ ++ __phy_write(phydev, 0x11, 0xbaef); ++ __phy_write(phydev, 0x12, 0x2e); ++ __phy_write(phydev, 0x10, 0x968c); ++ ++ /* VcoSlicerThreshBitsHigh */ ++ __phy_write(phydev, 0x11, 0x5555); ++ __phy_write(phydev, 0x12, 0x55); ++ __phy_write(phydev, 0x10, 0x8ec0); ++ ++ /* ResetSyncOffset = 6 */ ++ __phy_write(phydev, 0x11, 0x600); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x8fc0); ++ ++ /* VgaDecRate = 1 */ ++ __phy_write(phydev, 0x11, 0x4c2a); ++ __phy_write(phydev, 0x12, 0x3e); ++ __phy_write(phydev, 0x10, 0x8fa4); ++ ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234, ++ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK, ++ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9)); ++ ++ /* rg_tr_lpf_cnt_val = 512 */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200); ++ ++ /* IIR2 related */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe); ++ ++ /* FFE peaking */ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C, ++ MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D, ++ MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e); ++ ++ /* TX shape */ ++ /* 10/100/1000 TX shaper is enabled by default */ ++ for (i = 0x202; i < 0x230; i += 2) { ++ if (i == 0x20c || i == 0x218 || i == 0x224) ++ continue; ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, i, 0x2219); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, i + 1, 0x23); ++ } ++} ++ ++static inline void mt7988_phy_finetune(struct phy_device *phydev) ++{ ++ u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182, ++ 0x020d, 0x0206, 0x0384, 0x03d0, ++ 0x03c6, 0x030a, 0x0011, 0x0005 }; ++ int i; ++ ++ for (i = 0; i < MTK_PHY_TX_MLT3_END; i++) ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]); ++ ++ /* TCT finetune */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5); ++ ++ /* Disable TX power saving */ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7, ++ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8); ++ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5); ++ /* EnabRandUpdTrig = 1 */ ++ __phy_write(phydev, 0x11, 0x2f00); ++ __phy_write(phydev, 0x12, 0xe); ++ __phy_write(phydev, 0x10, 0x8fb0); ++ ++ /* SlvDSPreadyTime = 0xc */ ++ __phy_write(phydev, 0x11, 0x671); ++ __phy_write(phydev, 0x12, 0xc); ++ __phy_write(phydev, 0x10, 0x8fae); ++ ++ /* NormMseLoThresh = 85 */ ++ __phy_write(phydev, 0x11, 0x55a0); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x83aa); ++ ++ /* InhibitDisableDfeTail1000 = 1 */ ++ __phy_write(phydev, 0x11, 0x2b); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x8f80); ++ ++ /* SSTr related */ ++ __phy_write(phydev, 0x11, 0xbaef); ++ __phy_write(phydev, 0x12, 0x2e); ++ __phy_write(phydev, 0x10, 0x968c); ++ ++ /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2, ++ * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2 ++ */ ++ __phy_write(phydev, 0x11, 0xd10a); ++ __phy_write(phydev, 0x12, 0x34); ++ __phy_write(phydev, 0x10, 0x8f82); ++ ++ /* VcoSlicerThreshBitsHigh */ ++ __phy_write(phydev, 0x11, 0x5555); ++ __phy_write(phydev, 0x12, 0x55); ++ __phy_write(phydev, 0x10, 0x8ec0); ++ ++ /* ResetSyncOffset = 5 */ ++ __phy_write(phydev, 0x11, 0x500); ++ __phy_write(phydev, 0x12, 0x0); ++ __phy_write(phydev, 0x10, 0x8fc0); ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++ ++ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_2A30); ++ /* TxClkOffset = 2 */ ++ __phy_modify(phydev, MTK_PHY_ANARG_RG, MTK_PHY_TCLKOFFSET_MASK, ++ FIELD_PREP(MTK_PHY_TCLKOFFSET_MASK, 0x2)); ++ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0); ++ ++ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9*/ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234, ++ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK, ++ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9)); ++ ++ /* rg_tr_lpf_cnt_val = 512 */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200); ++ ++ /* IIR2 related */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe); ++ ++ /* FFE peaking */ ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C, ++ MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8); ++ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D, ++ MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e); ++ ++ /* TX shape */ ++ /* 10/100/1000 TX shaper is enabled by default */ ++ for (i = 0x202; i < 0x230; i += 2) { ++ if (i == 0x20c || i == 0x218 || i == 0x224) ++ continue; ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, i, 0x2219); ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, i + 1, 0x23); ++ } ++ ++ /* Disable LDO pump */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0); ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0); ++ ++ /* Adjust LDO output voltage */ ++ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222); ++} ++ ++static inline int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item, ++ u8 start_pair, u8 end_pair) ++{ ++ u8 pair_n; ++ int ret; ++ ++ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) { ++ /* TX_OFFSET & TX_AMP have no SW calibration. */ ++ switch (cal_item) { ++ case REXT: ++ ret = rext_cal_sw(phydev); ++ break; ++ case TX_R50: ++ ret = tx_r50_cal_sw(phydev, pair_n); ++ break; ++ case TX_VCM: ++ ret = tx_vcm_cal_sw(phydev, pair_n); ++ break; ++ default: ++ return -EINVAL; ++ } ++ if (ret) ++ return ret; ++ } ++ return 0; ++} ++ ++static inline int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item, ++ u8 start_pair, u8 end_pair, u32 *buf) ++{ ++ u8 pair_n; ++ int ret; ++ ++ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) { ++ /* TX_VCM has no efuse calibration. */ ++ switch (cal_item) { ++ case REXT: ++ ret = rext_cal_efuse(phydev, buf); ++ break; ++ case TX_OFFSET: ++ ret = tx_offset_cal_efuse(phydev, buf); ++ break; ++ case TX_AMP: ++ ret = tx_amp_cal_efuse(phydev, buf); ++ break; ++ case TX_R50: ++ ret = tx_r50_cal_efuse(phydev, buf, pair_n); ++ break; ++ default: ++ return -EINVAL; ++ } ++ if (ret) ++ return ret; ++ } ++ ++ return 0; ++} ++ ++static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item, ++ bool efs_valid, enum CAL_MODE cal_mode, u8 start_pair, ++ u8 end_pair, u32 *buf) ++{ ++ char cal_prop[5][20] = { "mediatek,rext", "mediatek,tx_offset", ++ "mediatek,tx_amp", "mediatek,tx_r50", ++ "mediatek,tx_vcm" }; ++ const char *dts_cal_mode; ++ u8 final_cal_mode = 0; ++ bool is_cal = true; ++ int ret, cal_ret; ++ ++ ret = of_property_read_string(phydev->mdio.dev.of_node, ++ cal_prop[cal_item], &dts_cal_mode); ++ ++ switch (cal_mode) { ++ case SW_EFUSE_M: ++ if ((efs_valid && ret) || ++ (efs_valid && !ret && strcmp("efuse", dts_cal_mode) == 0)) { ++ cal_ret = cal_efuse(phydev, cal_item, start_pair, ++ end_pair, buf); ++ final_cal_mode = EFUSE_K; ++ } else if ((!efs_valid && ret) || ++ (!ret && strcmp("sw", dts_cal_mode) == 0)) { ++ cal_ret = cal_sw(phydev, cal_item, start_pair, end_pair); ++ final_cal_mode = SW_K; ++ } else { ++ is_cal = false; ++ } ++ break; ++ case EFUSE_M: ++ if ((efs_valid && ret) || ++ (efs_valid && !ret && strcmp("efuse", dts_cal_mode) == 0)) { ++ cal_ret = cal_efuse(phydev, cal_item, start_pair, ++ end_pair, buf); ++ final_cal_mode = EFUSE_K; ++ } else { ++ is_cal = false; ++ } ++ break; ++ case SW_M: ++ if (ret || (!ret && strcmp("sw", dts_cal_mode) == 0)) { ++ cal_ret = cal_sw(phydev, cal_item, start_pair, end_pair); ++ final_cal_mode = SW_K; ++ } else { ++ is_cal = false; ++ } ++ break; ++ default: ++ return -EINVAL; ++ } ++ ++ if (cal_ret) { ++ dev_err(&phydev->mdio.dev, "[%s]cal failed\n", cal_prop[cal_item]); ++ return -EIO; ++ } ++ ++ if (!is_cal) { ++ dev_dbg(&phydev->mdio.dev, "[%s]K mode: %s(not supported)\n", ++ cal_prop[cal_item], dts_cal_mode); ++ return -EIO; ++ } ++ ++ dev_dbg(&phydev->mdio.dev, "[%s]K mode: %s(dts: %s), efs-valid: %s\n", ++ cal_prop[cal_item], ++ final_cal_mode ? "SW" : "EFUSE", ++ ret ? "not set" : dts_cal_mode, ++ efs_valid ? "yes" : "no"); ++ return 0; ++} ++ ++static int mt798x_phy_calibration(struct phy_device *phydev) ++{ ++ int ret = 0; ++ u32 *buf; ++ bool efs_valid = true; ++ size_t len; ++ struct nvmem_cell *cell; ++ ++ if (phydev->interface != PHY_INTERFACE_MODE_GMII) ++ return -EINVAL; ++ ++ cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data"); ++ if (IS_ERR(cell)) { ++ if (PTR_ERR(cell) == -EPROBE_DEFER) ++ return PTR_ERR(cell); ++ return 0; ++ } ++ ++ buf = (u32 *)nvmem_cell_read(cell, &len); ++ if (IS_ERR(buf)) ++ return PTR_ERR(buf); ++ nvmem_cell_put(cell); ++ ++ if (!buf[0] || !buf[1] || !buf[2] || !buf[3]) ++ efs_valid = false; ++ ++ if (len < 4 * sizeof(u32)) { ++ dev_err(&phydev->mdio.dev, "invalid calibration data\n"); ++ ret = -EINVAL; ++ goto out; ++ } ++ ++ ret = start_cal(phydev, REXT, efs_valid, SW_EFUSE_M, ++ NO_PAIR, NO_PAIR, buf); ++ if (ret) ++ goto out; ++ ret = start_cal(phydev, TX_OFFSET, efs_valid, EFUSE_M, ++ NO_PAIR, NO_PAIR, buf); ++ if (ret) ++ goto out; ++ ret = start_cal(phydev, TX_AMP, efs_valid, EFUSE_M, ++ NO_PAIR, NO_PAIR, buf); ++ if (ret) ++ goto out; ++ ret = start_cal(phydev, TX_R50, efs_valid, EFUSE_M, ++ PAIR_A, PAIR_D, buf); ++ if (ret) ++ goto out; ++ ret = start_cal(phydev, TX_VCM, efs_valid, SW_M, ++ PAIR_A, PAIR_A, buf); ++ if (ret) ++ goto out; ++ ++out: ++ kfree(buf); ++ return ret; ++} ++ ++static int mt7981_phy_probe(struct phy_device *phydev) ++{ ++ mt7981_phy_finetune(phydev); ++ ++ return mt798x_phy_calibration(phydev); ++} ++ ++static int mt7988_phy_probe(struct phy_device *phydev) ++{ ++ struct device_node *np; ++ void __iomem *boottrap; ++ u32 reg; ++ int port; ++ ++ /* Setup LED polarity according to boottrap's polarity */ ++ np = of_find_compatible_node(NULL, NULL, "mediatek,boottrap"); ++ if (!np) ++ return -ENOENT; ++ boottrap = of_iomap(np, 0); ++ if (!boottrap) ++ return -ENOMEM; ++ reg = readl(boottrap); ++ port = phydev->mdio.addr; ++ if ((port == GPHY_PORT0 && reg & BIT(8)) || ++ (port == GPHY_PORT1 && reg & BIT(9)) || ++ (port == GPHY_PORT2 && reg & BIT(10)) || ++ (port == GPHY_PORT3 && reg & BIT(11))) { ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL, ++ MTK_PHY_LED0_ENABLE | MTK_PHY_LED0_ON_LINK10 | ++ MTK_PHY_LED0_ON_LINK100 | ++ MTK_PHY_LED0_ON_LINK1000); ++ } else { ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_ON_CTRL, ++ MTK_PHY_LED0_ENABLE | MTK_PHY_LED0_POLARITY | ++ MTK_PHY_LED0_ON_LINK10 | ++ MTK_PHY_LED0_ON_LINK100 | ++ MTK_PHY_LED0_ON_LINK1000); ++ } ++ phy_write_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_LED0_BLINK_CTRL, ++ MTK_PHY_LED0_1000TX | MTK_PHY_LED0_1000RX | ++ MTK_PHY_LED0_100TX | MTK_PHY_LED0_100RX | ++ MTK_PHY_LED0_10TX | MTK_PHY_LED0_10RX); ++ ++ mt7988_phy_finetune(phydev); ++ ++ return mt798x_phy_calibration(phydev); ++} ++#endif ++ + static struct phy_driver mtk_gephy_driver[] = { + { + PHY_ID_MATCH_EXACT(0x03a29412), +@@ -97,6 +1422,30 @@ static struct phy_driver mtk_gephy_drive + .read_page = mtk_gephy_read_page, + .write_page = mtk_gephy_write_page, + }, ++#ifdef CONFIG_MEDIATEK_GE_PHY_SOC ++ { ++ PHY_ID_MATCH_EXACT(0x03a29461), ++ .name = "MediaTek MT7981 PHY", ++ .probe = mt7981_phy_probe, ++ .config_intr = genphy_no_config_intr, ++ .handle_interrupt = genphy_handle_interrupt_no_ack, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, ++ .read_page = mtk_gephy_read_page, ++ .write_page = mtk_gephy_write_page, ++ }, ++ { ++ PHY_ID_MATCH_EXACT(0x03a29481), ++ .name = "MediaTek MT7988 PHY", ++ .probe = mt7988_phy_probe, ++ .config_intr = genphy_no_config_intr, ++ .handle_interrupt = genphy_handle_interrupt_no_ack, ++ .suspend = genphy_suspend, ++ .resume = genphy_resume, ++ .read_page = mtk_gephy_read_page, ++ .write_page = mtk_gephy_write_page, ++ }, ++#endif + }; + + module_phy_driver(mtk_gephy_driver); +@@ -107,6 +1456,8 @@ static struct mdio_device_id __maybe_unu + }; + + MODULE_DESCRIPTION("MediaTek Gigabit Ethernet PHY driver"); ++MODULE_AUTHOR("Daniel Golle "); ++MODULE_AUTHOR("SkyLake Huang "); + MODULE_AUTHOR("DENG, Qingfang "); + MODULE_LICENSE("GPL"); +