From: Sebastian Schaper Date: Sat, 6 Aug 2022 22:59:06 +0000 (+0200) Subject: ath79: add support for ZyXEL NWA1100-NH X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a434795809bb0759947f57117a28cd0df5e19e76;p=openwrt%2Fstaging%2Faparcar.git ath79: add support for ZyXEL NWA1100-NH Specifications: * AR9342, 16 MiB Flash, 64 MiB RAM, 802.11n 2T2R, 2.4 GHz * 1x Gigabit Ethernet (AR8035), 802.3af PoE Installation: * OEM Web UI is at 192.168.1.2 login as `admin` with password `1234` * Flash factory-AASI.bin The string `AASI` needs to be present within the file name of the uploaded image to be accepted by the OEM Web-based updater, the factory image is named accordingly to save the user from the hassle of manual renaming. TFTP Recovery: * Open the case, connect to TTL UART port (this is the official method described by Zyxel, the reset button is useless during power-on) * Extract factory image (.tar.bz2), serve `vmlinux_mi124_f1e.lzma.uImage` and `mi124_f1e-jffs2` via tftp at 192.168.1.10 * Interrupt uboot countdown, execute commands `run lk` `run lf` to flash the kernel / filesystem accordingly MAC addresses as verified by OEM firmware: use address source LAN *:cc mib0 0x30 ('eth0mac'), art 0x1002 (label) 2g *:cd mib0 0x4b ('wifi0mac') Signed-off-by: Sebastian Schaper --- diff --git a/target/linux/ath79/dts/ar9342_zyxel_nwa1100-nh.dts b/target/linux/ath79/dts/ar9342_zyxel_nwa1100-nh.dts new file mode 100644 index 0000000000..fd438059e5 --- /dev/null +++ b/target/linux/ath79/dts/ar9342_zyxel_nwa1100-nh.dts @@ -0,0 +1,46 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "ar9342_zyxel_nwa11xx.dtsi" + +/ { + compatible = "zyxel,nwa1100-nh", "qca,ar9342"; + model = "Zyxel NWA1100-NH"; + + aliases { + label-mac-device = ð0; + led-boot = &led_status_green; + led-failsafe = &led_status_red; + led-running = &led_status_green; + led-upgrade = &led_status_red; + }; + leds { + compatible = "gpio-leds"; + + led_status_green: status_green { + label = "green:status"; + gpios = <&gpio 12 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + + led_status_red: status_red { + label = "red:status"; + gpios = <&gpio 11 GPIO_ACTIVE_LOW>; + }; + + led_wlan_green: wlan_green { + label = "green:wlan"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0tpt"; + }; + + led_lan_green: lan_green { + label = "green:lan"; + gpios = <&gpio 13 GPIO_ACTIVE_LOW>; + }; + + led_lan_amber: lan_amber { + label = "amber:lan"; + gpios = <&gpio 17 GPIO_ACTIVE_LOW>; + }; + }; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index b3a8b2fbb6..188262018c 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -484,6 +484,9 @@ zbtlink,zbt-wd323) ucidef_set_led_switch "lan1" "LAN1" "orange:lan1" "switch0" "0x10" ucidef_set_led_switch "lan2" "LAN2" "orange:lan2" "switch0" "0x08" ;; +zyxel,nwa1100-nh) + ucidef_set_led_netdev "lan_data" "LAN_DATA" "amber:lan" "eth0" "tx rx" + ucidef_set_led_netdev "lan_link" "LAN_LINK" "green:lan" "eth0" "link" esac board_config_flush diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 9656c009a1..c576dacee5 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -110,6 +110,7 @@ ath79_setup_interfaces() ubnt,unifi|\ wd,mynet-wifi-rangeextender|\ winchannel,wb2000|\ + zyxel,nwa1100-nh|\ zyxel,nwa1121-ni|\ zyxel,nwa1123-ac|\ zyxel,nwa1123-ni) diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index 612b79f8d6..575004ea15 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -2708,6 +2708,14 @@ define Device/zyxel_nwa11xx vmlinux_mi124_f1e mi124_f1e-jffs2 | append-md5sum-bin endef +define Device/zyxel_nwa1100-nh + $(Device/zyxel_nwa11xx) + DEVICE_MODEL := NWA1100 + DEVICE_VARIANT := NH + ZYXEL_MODEL_STRING := AASI +endef +TARGET_DEVICES += zyxel_nwa1100-nh + define Device/zyxel_nwa1121-ni $(Device/zyxel_nwa11xx) DEVICE_MODEL := NWA1121