From: John Crispin Date: Mon, 25 Aug 2014 06:35:42 +0000 (+0000) Subject: ramips: second spi device on rt5350 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a3fd3dc7968629334b8f8ec76e3e020ef18cad85;p=openwrt%2Fstaging%2Fzorun.git ramips: second spi device on rt5350 This is based on Jon Smirl's patch with the following changes: - Set CS polarity as low by default. - Add support for changing CS polarity. - Add support for changing LSB/MSB. - Add support for changing SPI mode. - Fix indentations. I tested it on a VoCore. Works fine connected to a second flash, but fails to detect MMC/SD cards due to SPI clock speed. Signed-off-by: Jon Smirl Signed-off-by: Álvaro Fernández Rojas SVN-Revision: 42276 --- diff --git a/target/linux/ramips/dts/rt5350.dtsi b/target/linux/ramips/dts/rt5350.dtsi index 722540b037..8ba20bbdfc 100644 --- a/target/linux/ramips/dts/rt5350.dtsi +++ b/target/linux/ramips/dts/rt5350.dtsi @@ -151,7 +151,7 @@ }; spi@b00 { - compatible = "ralink,rt5350-spi", "ralink,rt2880-spi"; + compatible = "ralink,rt5350-spi"; reg = <0xb00 0x100>; resets = <&rstctrl 18>; @@ -161,7 +161,7 @@ #size-cells = <1>; pinctrl-names = "default"; - pinctrl-0 = <&spi_pins>; + pinctrl-0 = <&spi_pins &spi_cs1>; status = "disabled"; }; diff --git a/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch b/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch new file mode 100644 index 0000000000..64c4150080 --- /dev/null +++ b/target/linux/ramips/patches-3.10/0222-rt5350-spi-second-device.patch @@ -0,0 +1,368 @@ +--- a/drivers/spi/spi-rt2880.c ++++ b/drivers/spi/spi-rt2880.c +@@ -29,16 +29,17 @@ + #define SPI_BPW_MASK(bits) BIT((bits) - 1) + + #define DRIVER_NAME "spi-rt2880" +-/* only one slave is supported*/ +-#define RALINK_NUM_CHIPSELECTS 1 + /* in usec */ + #define RALINK_SPI_WAIT_MAX_LOOP 2000 + +-#define RAMIPS_SPI_STAT 0x00 +-#define RAMIPS_SPI_CFG 0x10 +-#define RAMIPS_SPI_CTL 0x14 +-#define RAMIPS_SPI_DATA 0x20 +-#define RAMIPS_SPI_FIFO_STAT 0x38 ++#define RAMIPS_SPI_DEV_OFFSET 0x40 ++ ++#define RAMIPS_SPI_STAT(cs) (0x00 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_CFG(cs) (0x10 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_CTL(cs) (0x14 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_DATA(cs) (0x20 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_FIFO_STAT(cs) (0x38 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_ARBITER 0xF0 + + /* SPISTAT register bit field */ + #define SPISTAT_BUSY BIT(0) +@@ -68,6 +69,10 @@ + /* SPIFIFOSTAT register bit field */ + #define SPIFIFOSTAT_TXFULL BIT(17) + ++#define SPICTL_ARB_EN BIT(31) ++#define SPI1_POR BIT(1) ++#define SPI0_POR BIT(0) ++ + #define MT7621_SPI_TRANS 0x00 + #define SPITRANS_BUSY BIT(16) + #define MT7621_SPI_OPCODE 0x04 +@@ -78,13 +83,16 @@ + #define MT7621_SPI_MASTER 0x28 + #define MT7621_SPI_SPACE 0x3c + ++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH) ++ + struct rt2880_spi; + + struct rt2880_spi_ops { + void (*init_hw)(struct rt2880_spi *rs); +- void (*set_cs)(struct rt2880_spi *rs, int enable); ++ void (*set_cs)(struct spi_device *spi, int enable); + int (*baudrate_set)(struct spi_device *spi, unsigned int speed); + unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer); ++ int num_cs; + }; + + struct rt2880_spi { +@@ -141,6 +149,7 @@ static inline void rt2880_spi_clrbits(st + + static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed) + { ++ int cs = spi->chip_select; + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + u32 rate; + u32 prescale; +@@ -168,9 +177,9 @@ static int rt2880_spi_baudrate_set(struc + prescale = ilog2(rate / 2); + dev_dbg(&spi->dev, "prescale:%u\n", prescale); + +- reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); ++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs)); + reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale); +- rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg); + rs->speed = speed; + return 0; + } +@@ -194,7 +203,8 @@ rt2880_spi_setup_transfer(struct spi_dev + { + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + unsigned int speed = spi->max_speed_hz; +- int rc; ++ int rc, cs = spi->chip_select; ++ u32 reg; + + if ((t != NULL) && t->speed_hz) + speed = t->speed_hz; +@@ -206,19 +216,61 @@ rt2880_spi_setup_transfer(struct spi_dev + return rc; + } + ++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs)); ++ ++ reg = (reg & ~SPICFG_MSBFIRST); ++ if (!(spi->mode & SPI_LSB_FIRST)) ++ reg |= SPICFG_MSBFIRST; ++ ++ reg = (reg & ~(SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING |SPICFG_TXCLKEDGE_FALLING)); ++ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) { ++ case SPI_MODE_0: ++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_1: ++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_2: ++ reg |= SPICFG_RXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_3: ++ reg |= SPICFG_TXCLKEDGE_FALLING; ++ break; ++ } ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg); ++ ++ reg = SPICTL_ARB_EN; ++ if (spi->mode & SPI_CS_HIGH) { ++ switch(cs) { ++ case 0: ++ reg |= SPI0_POR; ++ break; ++ case 1: ++ reg |= SPI1_POR; ++ break; ++ } ++ } ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, reg); ++ + return 0; + } + +-static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable) ++static void rt2880_spi_set_cs(struct spi_device *spi, int enable) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ int cs = spi->chip_select; ++ + if (enable) +- rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA); + else +- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA); + } + +-static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable) ++static void mt7621_spi_set_cs(struct spi_device *spi, int enable) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR); + + if (enable) +@@ -228,14 +280,16 @@ static void mt7621_spi_set_cs(struct rt2 + rt2880_spi_write(rs, MT7621_SPI_POLAR, polar); + } + +-static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs) ++static inline int rt2880_spi_wait_till_ready(struct spi_device *spi) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ int cs = spi->chip_select; + int i; + + for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) { + u32 status; + +- status = rt2880_spi_read(rs, RAMIPS_SPI_STAT); ++ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT(cs)); + if ((status & SPISTAT_BUSY) == 0) + return 0; + +@@ -246,8 +300,9 @@ static inline int rt2880_spi_wait_till_r + return -ETIMEDOUT; + } + +-static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs) ++static inline int mt7621_spi_wait_till_ready(struct spi_device *spi) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + int i; + + for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) { +@@ -268,6 +323,7 @@ static unsigned int + rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer) + { + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ int cs = spi->chip_select; + unsigned count = 0; + u8 *rx = xfer->rx_buf; + const u8 *tx = xfer->tx_buf; +@@ -279,9 +335,9 @@ rt2880_spi_write_read(struct spi_device + + if (tx) { + for (count = 0; count < xfer->len; count++) { +- rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]); +- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR); +- err = rt2880_spi_wait_till_ready(rs); ++ rt2880_spi_write(rs, RAMIPS_SPI_DATA(cs), tx[count]); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTWR); ++ err = rt2880_spi_wait_till_ready(spi); + if (err) { + dev_err(&spi->dev, "TX failed, err=%d\n", err); + goto out; +@@ -291,13 +347,13 @@ rt2880_spi_write_read(struct spi_device + + if (rx) { + for (count = 0; count < xfer->len; count++) { +- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD); +- err = rt2880_spi_wait_till_ready(rs); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTRD); ++ err = rt2880_spi_wait_till_ready(spi); + if (err) { + dev_err(&spi->dev, "RX failed, err=%d\n", err); + goto out; + } +- rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA); ++ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA(cs)); + } + } + +@@ -364,7 +420,7 @@ mt7621_spi_write_read(struct spi_device + trans |= SPI_CTL_START; + rt2880_spi_write(rs, MT7621_SPI_TRANS, trans); + +- mt7621_spi_wait_till_ready(rs); ++ mt7621_spi_wait_till_ready(spi); + + if (rx) { + u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0); +@@ -440,7 +496,7 @@ static int rt2880_spi_transfer_one_messa + } + + if (!cs_active) { +- rs->ops->set_cs(rs, 1); ++ rs->ops->set_cs(spi, 1); + cs_active = 1; + } + +@@ -451,14 +507,14 @@ static int rt2880_spi_transfer_one_messa + udelay(t->delay_usecs); + + if (t->cs_change) { +- rs->ops->set_cs(rs, 0); ++ rs->ops->set_cs(spi, 0); + cs_active = 0; + } + } + + msg_done: + if (cs_active) +- rs->ops->set_cs(rs, 0); ++ rs->ops->set_cs(spi, 0); + + m->status = status; + spi_finalize_current_message(master); +@@ -471,7 +527,7 @@ static int rt2880_spi_setup(struct spi_d + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + + if ((spi->max_speed_hz == 0) || +- (spi->max_speed_hz > (rs->sys_freq / 2))) ++ (spi->max_speed_hz > (rs->sys_freq / 2))) + spi->max_speed_hz = (rs->sys_freq / 2); + + if (spi->max_speed_hz < (rs->sys_freq / 128)) { +@@ -488,10 +544,25 @@ static int rt2880_spi_setup(struct spi_d + + static void rt2880_spi_reset(struct rt2880_spi *rs) + { +- rt2880_spi_write(rs, RAMIPS_SPI_CFG, ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(0), + SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING | + SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL); +- rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA); ++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(0), SPICTL_HIZSDO | SPICTL_SPIENA); ++} ++ ++static void rt5350_spi_reset(struct rt2880_spi *rs) ++{ ++ int cs; ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, ++ SPICTL_ARB_EN); ++ ++ for (cs = 0; cs < rs->ops->num_cs; cs++) { ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), ++ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING | ++ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL); ++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(cs), SPICTL_HIZSDO | SPICTL_SPIENA); ++ } + } + + static void mt7621_spi_reset(struct rt2880_spi *rs) +@@ -511,24 +582,33 @@ static struct rt2880_spi_ops spi_ops[] = + .set_cs = rt2880_spi_set_cs, + .baudrate_set = rt2880_spi_baudrate_set, + .write_read = rt2880_spi_write_read, ++ .num_cs = 1, ++ }, { ++ .init_hw = rt5350_spi_reset, ++ .set_cs = rt2880_spi_set_cs, ++ .baudrate_set = rt2880_spi_baudrate_set, ++ .write_read = rt2880_spi_write_read, ++ .num_cs = 2, + }, { + .init_hw = mt7621_spi_reset, + .set_cs = mt7621_spi_set_cs, + .baudrate_set = mt7621_spi_baudrate_set, + .write_read = mt7621_spi_write_read, ++ .num_cs = 1, + }, + }; + + static const struct of_device_id rt2880_spi_match[] = { + { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]}, +- { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] }, ++ { .compatible = "ralink,rt5350-spi", .data = &spi_ops[1]}, ++ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[2] }, + {}, + }; + MODULE_DEVICE_TABLE(of, rt2880_spi_match); + + static int rt2880_spi_probe(struct platform_device *pdev) + { +- const struct of_device_id *match; ++ const struct of_device_id *match; + struct spi_master *master; + struct rt2880_spi *rs; + unsigned long flags; +@@ -536,10 +616,12 @@ static int rt2880_spi_probe(struct platf + struct resource *r; + int status = 0; + struct clk *clk; ++ struct rt2880_spi_ops *ops; + +- match = of_match_device(rt2880_spi_match, &pdev->dev); ++ match = of_match_device(rt2880_spi_match, &pdev->dev); + if (!match) + return -EINVAL; ++ ops = (struct rt2880_spi_ops *)match->data; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, r); +@@ -563,14 +645,13 @@ static int rt2880_spi_probe(struct platf + return -ENOMEM; + } + +- /* we support only mode 0, and no options */ +- master->mode_bits = 0; ++ master->mode_bits = RT2880_SPI_MODE_BITS; + + master->setup = rt2880_spi_setup; + master->transfer_one_message = rt2880_spi_transfer_one_message; +- master->num_chipselect = RALINK_NUM_CHIPSELECTS; + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->dev.of_node = pdev->dev.of_node; ++ master->num_chipselect = ops->num_cs; + + dev_set_drvdata(&pdev->dev, master); + +@@ -579,7 +660,7 @@ static int rt2880_spi_probe(struct platf + rs->clk = clk; + rs->master = master; + rs->sys_freq = clk_get_rate(rs->clk); +- rs->ops = (struct rt2880_spi_ops *) match->data; ++ rs->ops = ops; + dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq); + spin_lock_irqsave(&rs->lock, flags); + diff --git a/target/linux/ramips/patches-3.14/0104-rt5350-spi-second-device.patch b/target/linux/ramips/patches-3.14/0104-rt5350-spi-second-device.patch new file mode 100644 index 0000000000..64c4150080 --- /dev/null +++ b/target/linux/ramips/patches-3.14/0104-rt5350-spi-second-device.patch @@ -0,0 +1,368 @@ +--- a/drivers/spi/spi-rt2880.c ++++ b/drivers/spi/spi-rt2880.c +@@ -29,16 +29,17 @@ + #define SPI_BPW_MASK(bits) BIT((bits) - 1) + + #define DRIVER_NAME "spi-rt2880" +-/* only one slave is supported*/ +-#define RALINK_NUM_CHIPSELECTS 1 + /* in usec */ + #define RALINK_SPI_WAIT_MAX_LOOP 2000 + +-#define RAMIPS_SPI_STAT 0x00 +-#define RAMIPS_SPI_CFG 0x10 +-#define RAMIPS_SPI_CTL 0x14 +-#define RAMIPS_SPI_DATA 0x20 +-#define RAMIPS_SPI_FIFO_STAT 0x38 ++#define RAMIPS_SPI_DEV_OFFSET 0x40 ++ ++#define RAMIPS_SPI_STAT(cs) (0x00 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_CFG(cs) (0x10 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_CTL(cs) (0x14 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_DATA(cs) (0x20 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_FIFO_STAT(cs) (0x38 + (cs * RAMIPS_SPI_DEV_OFFSET)) ++#define RAMIPS_SPI_ARBITER 0xF0 + + /* SPISTAT register bit field */ + #define SPISTAT_BUSY BIT(0) +@@ -68,6 +69,10 @@ + /* SPIFIFOSTAT register bit field */ + #define SPIFIFOSTAT_TXFULL BIT(17) + ++#define SPICTL_ARB_EN BIT(31) ++#define SPI1_POR BIT(1) ++#define SPI0_POR BIT(0) ++ + #define MT7621_SPI_TRANS 0x00 + #define SPITRANS_BUSY BIT(16) + #define MT7621_SPI_OPCODE 0x04 +@@ -78,13 +83,16 @@ + #define MT7621_SPI_MASTER 0x28 + #define MT7621_SPI_SPACE 0x3c + ++#define RT2880_SPI_MODE_BITS (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | SPI_CS_HIGH) ++ + struct rt2880_spi; + + struct rt2880_spi_ops { + void (*init_hw)(struct rt2880_spi *rs); +- void (*set_cs)(struct rt2880_spi *rs, int enable); ++ void (*set_cs)(struct spi_device *spi, int enable); + int (*baudrate_set)(struct spi_device *spi, unsigned int speed); + unsigned int (*write_read)(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer); ++ int num_cs; + }; + + struct rt2880_spi { +@@ -141,6 +149,7 @@ static inline void rt2880_spi_clrbits(st + + static int rt2880_spi_baudrate_set(struct spi_device *spi, unsigned int speed) + { ++ int cs = spi->chip_select; + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + u32 rate; + u32 prescale; +@@ -168,9 +177,9 @@ static int rt2880_spi_baudrate_set(struc + prescale = ilog2(rate / 2); + dev_dbg(&spi->dev, "prescale:%u\n", prescale); + +- reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG); ++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs)); + reg = ((reg & ~SPICFG_SPICLK_PRESCALE_MASK) | prescale); +- rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg); ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg); + rs->speed = speed; + return 0; + } +@@ -194,7 +203,8 @@ rt2880_spi_setup_transfer(struct spi_dev + { + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + unsigned int speed = spi->max_speed_hz; +- int rc; ++ int rc, cs = spi->chip_select; ++ u32 reg; + + if ((t != NULL) && t->speed_hz) + speed = t->speed_hz; +@@ -206,19 +216,61 @@ rt2880_spi_setup_transfer(struct spi_dev + return rc; + } + ++ reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG(cs)); ++ ++ reg = (reg & ~SPICFG_MSBFIRST); ++ if (!(spi->mode & SPI_LSB_FIRST)) ++ reg |= SPICFG_MSBFIRST; ++ ++ reg = (reg & ~(SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING |SPICFG_TXCLKEDGE_FALLING)); ++ switch(spi->mode & (SPI_CPOL | SPI_CPHA)) { ++ case SPI_MODE_0: ++ reg |= SPICFG_SPICLKPOL | SPICFG_TXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_1: ++ reg |= SPICFG_SPICLKPOL | SPICFG_RXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_2: ++ reg |= SPICFG_RXCLKEDGE_FALLING; ++ break; ++ case SPI_MODE_3: ++ reg |= SPICFG_TXCLKEDGE_FALLING; ++ break; ++ } ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), reg); ++ ++ reg = SPICTL_ARB_EN; ++ if (spi->mode & SPI_CS_HIGH) { ++ switch(cs) { ++ case 0: ++ reg |= SPI0_POR; ++ break; ++ case 1: ++ reg |= SPI1_POR; ++ break; ++ } ++ } ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, reg); ++ + return 0; + } + +-static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable) ++static void rt2880_spi_set_cs(struct spi_device *spi, int enable) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ int cs = spi->chip_select; ++ + if (enable) +- rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++ rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA); + else +- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_SPIENA); + } + +-static void mt7621_spi_set_cs(struct rt2880_spi *rs, int enable) ++static void mt7621_spi_set_cs(struct spi_device *spi, int enable) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + u32 polar = rt2880_spi_read(rs, MT7621_SPI_POLAR); + + if (enable) +@@ -228,14 +280,16 @@ static void mt7621_spi_set_cs(struct rt2 + rt2880_spi_write(rs, MT7621_SPI_POLAR, polar); + } + +-static inline int rt2880_spi_wait_till_ready(struct rt2880_spi *rs) ++static inline int rt2880_spi_wait_till_ready(struct spi_device *spi) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ int cs = spi->chip_select; + int i; + + for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) { + u32 status; + +- status = rt2880_spi_read(rs, RAMIPS_SPI_STAT); ++ status = rt2880_spi_read(rs, RAMIPS_SPI_STAT(cs)); + if ((status & SPISTAT_BUSY) == 0) + return 0; + +@@ -246,8 +300,9 @@ static inline int rt2880_spi_wait_till_r + return -ETIMEDOUT; + } + +-static inline int mt7621_spi_wait_till_ready(struct rt2880_spi *rs) ++static inline int mt7621_spi_wait_till_ready(struct spi_device *spi) + { ++ struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + int i; + + for (i = 0; i < RALINK_SPI_WAIT_MAX_LOOP; i++) { +@@ -268,6 +323,7 @@ static unsigned int + rt2880_spi_write_read(struct spi_device *spi, struct list_head *list, struct spi_transfer *xfer) + { + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); ++ int cs = spi->chip_select; + unsigned count = 0; + u8 *rx = xfer->rx_buf; + const u8 *tx = xfer->tx_buf; +@@ -279,9 +335,9 @@ rt2880_spi_write_read(struct spi_device + + if (tx) { + for (count = 0; count < xfer->len; count++) { +- rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]); +- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR); +- err = rt2880_spi_wait_till_ready(rs); ++ rt2880_spi_write(rs, RAMIPS_SPI_DATA(cs), tx[count]); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTWR); ++ err = rt2880_spi_wait_till_ready(spi); + if (err) { + dev_err(&spi->dev, "TX failed, err=%d\n", err); + goto out; +@@ -291,13 +347,13 @@ rt2880_spi_write_read(struct spi_device + + if (rx) { + for (count = 0; count < xfer->len; count++) { +- rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD); +- err = rt2880_spi_wait_till_ready(rs); ++ rt2880_spi_setbits(rs, RAMIPS_SPI_CTL(cs), SPICTL_STARTRD); ++ err = rt2880_spi_wait_till_ready(spi); + if (err) { + dev_err(&spi->dev, "RX failed, err=%d\n", err); + goto out; + } +- rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA); ++ rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA(cs)); + } + } + +@@ -364,7 +420,7 @@ mt7621_spi_write_read(struct spi_device + trans |= SPI_CTL_START; + rt2880_spi_write(rs, MT7621_SPI_TRANS, trans); + +- mt7621_spi_wait_till_ready(rs); ++ mt7621_spi_wait_till_ready(spi); + + if (rx) { + u32 data0 = rt2880_spi_read(rs, MT7621_SPI_DATA0); +@@ -440,7 +496,7 @@ static int rt2880_spi_transfer_one_messa + } + + if (!cs_active) { +- rs->ops->set_cs(rs, 1); ++ rs->ops->set_cs(spi, 1); + cs_active = 1; + } + +@@ -451,14 +507,14 @@ static int rt2880_spi_transfer_one_messa + udelay(t->delay_usecs); + + if (t->cs_change) { +- rs->ops->set_cs(rs, 0); ++ rs->ops->set_cs(spi, 0); + cs_active = 0; + } + } + + msg_done: + if (cs_active) +- rs->ops->set_cs(rs, 0); ++ rs->ops->set_cs(spi, 0); + + m->status = status; + spi_finalize_current_message(master); +@@ -471,7 +527,7 @@ static int rt2880_spi_setup(struct spi_d + struct rt2880_spi *rs = spidev_to_rt2880_spi(spi); + + if ((spi->max_speed_hz == 0) || +- (spi->max_speed_hz > (rs->sys_freq / 2))) ++ (spi->max_speed_hz > (rs->sys_freq / 2))) + spi->max_speed_hz = (rs->sys_freq / 2); + + if (spi->max_speed_hz < (rs->sys_freq / 128)) { +@@ -488,10 +544,25 @@ static int rt2880_spi_setup(struct spi_d + + static void rt2880_spi_reset(struct rt2880_spi *rs) + { +- rt2880_spi_write(rs, RAMIPS_SPI_CFG, ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(0), + SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING | + SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL); +- rt2880_spi_write(rs, RAMIPS_SPI_CTL, SPICTL_HIZSDO | SPICTL_SPIENA); ++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(0), SPICTL_HIZSDO | SPICTL_SPIENA); ++} ++ ++static void rt5350_spi_reset(struct rt2880_spi *rs) ++{ ++ int cs; ++ ++ rt2880_spi_write(rs, RAMIPS_SPI_ARBITER, ++ SPICTL_ARB_EN); ++ ++ for (cs = 0; cs < rs->ops->num_cs; cs++) { ++ rt2880_spi_write(rs, RAMIPS_SPI_CFG(cs), ++ SPICFG_MSBFIRST | SPICFG_TXCLKEDGE_FALLING | ++ SPICFG_SPICLK_DIV16 | SPICFG_SPICLKPOL); ++ rt2880_spi_write(rs, RAMIPS_SPI_CTL(cs), SPICTL_HIZSDO | SPICTL_SPIENA); ++ } + } + + static void mt7621_spi_reset(struct rt2880_spi *rs) +@@ -511,24 +582,33 @@ static struct rt2880_spi_ops spi_ops[] = + .set_cs = rt2880_spi_set_cs, + .baudrate_set = rt2880_spi_baudrate_set, + .write_read = rt2880_spi_write_read, ++ .num_cs = 1, ++ }, { ++ .init_hw = rt5350_spi_reset, ++ .set_cs = rt2880_spi_set_cs, ++ .baudrate_set = rt2880_spi_baudrate_set, ++ .write_read = rt2880_spi_write_read, ++ .num_cs = 2, + }, { + .init_hw = mt7621_spi_reset, + .set_cs = mt7621_spi_set_cs, + .baudrate_set = mt7621_spi_baudrate_set, + .write_read = mt7621_spi_write_read, ++ .num_cs = 1, + }, + }; + + static const struct of_device_id rt2880_spi_match[] = { + { .compatible = "ralink,rt2880-spi", .data = &spi_ops[0]}, +- { .compatible = "ralink,mt7621-spi", .data = &spi_ops[1] }, ++ { .compatible = "ralink,rt5350-spi", .data = &spi_ops[1]}, ++ { .compatible = "ralink,mt7621-spi", .data = &spi_ops[2] }, + {}, + }; + MODULE_DEVICE_TABLE(of, rt2880_spi_match); + + static int rt2880_spi_probe(struct platform_device *pdev) + { +- const struct of_device_id *match; ++ const struct of_device_id *match; + struct spi_master *master; + struct rt2880_spi *rs; + unsigned long flags; +@@ -536,10 +616,12 @@ static int rt2880_spi_probe(struct platf + struct resource *r; + int status = 0; + struct clk *clk; ++ struct rt2880_spi_ops *ops; + +- match = of_match_device(rt2880_spi_match, &pdev->dev); ++ match = of_match_device(rt2880_spi_match, &pdev->dev); + if (!match) + return -EINVAL; ++ ops = (struct rt2880_spi_ops *)match->data; + + r = platform_get_resource(pdev, IORESOURCE_MEM, 0); + base = devm_ioremap_resource(&pdev->dev, r); +@@ -563,14 +645,13 @@ static int rt2880_spi_probe(struct platf + return -ENOMEM; + } + +- /* we support only mode 0, and no options */ +- master->mode_bits = 0; ++ master->mode_bits = RT2880_SPI_MODE_BITS; + + master->setup = rt2880_spi_setup; + master->transfer_one_message = rt2880_spi_transfer_one_message; +- master->num_chipselect = RALINK_NUM_CHIPSELECTS; + master->bits_per_word_mask = SPI_BPW_MASK(8); + master->dev.of_node = pdev->dev.of_node; ++ master->num_chipselect = ops->num_cs; + + dev_set_drvdata(&pdev->dev, master); + +@@ -579,7 +660,7 @@ static int rt2880_spi_probe(struct platf + rs->clk = clk; + rs->master = master; + rs->sys_freq = clk_get_rate(rs->clk); +- rs->ops = (struct rt2880_spi_ops *) match->data; ++ rs->ops = ops; + dev_dbg(&pdev->dev, "sys_freq: %u\n", rs->sys_freq); + spin_lock_irqsave(&rs->lock, flags); +