From: Jens Muecke Date: Wed, 12 Dec 2007 01:46:24 +0000 (+0000) Subject: Removing Grub for olpc (unnecessary) Adding Bootscript Some SD-Card fixes Config... X-Git-Tag: 8.09_rc1~2112 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a3d681bba552ca210d1795845bd1bf89a5c1b38d;p=openwrt%2Fsvn-archive%2Fopenwrt.git Removing Grub for olpc (unnecessary) Adding Bootscript Some SD-Card fixes Config changes SVN-Revision: 9712 --- diff --git a/target/linux/olpc/config-2.6.23 b/target/linux/olpc/config-2.6.23 index 4597d43985..99fe878ffc 100644 --- a/target/linux/olpc/config-2.6.23 +++ b/target/linux/olpc/config-2.6.23 @@ -1,7 +1,5 @@ -# CONFIG_3C515 is not set # CONFIG_60XX_WDT is not set # CONFIG_8139TOO is not set -# CONFIG_AC3200 is not set # CONFIG_ACPI is not set # CONFIG_ACQUIRE_WDT is not set # CONFIG_ADVANTECH_WDT is not set @@ -10,7 +8,6 @@ # CONFIG_ALIM1535_WDT is not set # CONFIG_ALIM7101_WDT is not set # CONFIG_APM is not set -# CONFIG_APRICOT is not set # CONFIG_ARCH_HAS_ILOG2_U32 is not set # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_ARCH_MAY_HAVE_PC_FDC=y @@ -18,9 +15,7 @@ CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SUPPORTS_MSI=y -# CONFIG_AT1700 is not set # CONFIG_ATM is not set -# CONFIG_AX25 is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y CONFIG_BACKLIGHT_LCD_SUPPORT=y # CONFIG_BACKLIGHT_PROGEAR is not set @@ -31,15 +26,10 @@ CONFIG_BATTERY_OLPC=y CONFIG_BINFMT_MISC=y CONFIG_BITREVERSE=y CONFIG_BLK_DEV_CRYPTOLOOP=y -CONFIG_BLK_DEV_GENERIC=y -# CONFIG_BLK_DEV_HD is not set -# CONFIG_BLK_DEV_HD_IDE is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -CONFIG_BLK_DEV_IDE=y -CONFIG_BLK_DEV_IDEDISK=y +CONFIG_BLK_DEV_GENERIC=m +CONFIG_BLK_DEV_IDE=m +CONFIG_BLK_DEV_IDEDISK=m CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_BLK_DEV_IDEDMA_PCI=y CONFIG_BLK_DEV_IDEPCI=y CONFIG_BLK_DEV_LOOP=y @@ -48,12 +38,11 @@ CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -CONFIG_BLK_DEV_SC1200=y +CONFIG_BLK_DEV_SC1200=m CONFIG_BLK_DEV_SD=y CONFIG_BLK_DEV_SR=y CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_BLK_DEV_VIA82CXXX=y -# CONFIG_BLK_DEV_XD is not set +CONFIG_BLK_DEV_VIA82CXXX=m # CONFIG_BONDING is not set CONFIG_BOUNCE=y # CONFIG_BRIDGE_NF_EBTABLES is not set @@ -64,7 +53,6 @@ CONFIG_CHR_DEV_SG=y CONFIG_CLOCKSOURCE_WATCHDOG=y CONFIG_COMPAT_VDSO=y # CONFIG_CPU5_WDT is not set -# CONFIG_CPUSETS is not set # CONFIG_CPU_FREQ is not set # CONFIG_CRC_ITU_T is not set # CONFIG_CRYPTO_AES is not set @@ -99,11 +87,9 @@ CONFIG_CRYPTO_MANAGER=y # CONFIG_CRYPTO_TWOFISH_586 is not set # CONFIG_CRYPTO_WP512 is not set # CONFIG_CS5535_GPIO is not set -# CONFIG_CS89x0 is not set # CONFIG_DCDBAS is not set # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DELL_RBU is not set -# CONFIG_DEPCA is not set CONFIG_DEVPORT=y # CONFIG_DISABLE_CONSOLE_SUSPEND is not set CONFIG_DISPLAY_SUPPORT=y @@ -117,13 +103,7 @@ CONFIG_EARLY_PRINTK=y # CONFIG_EDAC is not set # CONFIG_EDD is not set # CONFIG_EEPROM_93CX6 is not set -# CONFIG_EISA is not set -# CONFIG_EL1 is not set -# CONFIG_EL16 is not set -# CONFIG_EL2 is not set -# CONFIG_EL3 is not set CONFIG_ELF_CORE=y -# CONFIG_ELPLUS is not set # CONFIG_EUROTECH_WDT is not set CONFIG_EXT2_FS=y # CONFIG_EXT3_FS is not set @@ -195,8 +175,8 @@ CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CMOS_UPDATE=y CONFIG_GENERIC_IOMAP=y CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_PENDING_IRQ=y CONFIG_GEODE_MFGPT_TIMER=y +# CONFIG_HAMRADIO is not set # CONFIG_HANGCHECK_TIMER is not set CONFIG_HAS_DMA=y CONFIG_HAS_IOMEM=y @@ -205,14 +185,12 @@ CONFIG_HAS_IOPORT=y # CONFIG_HFSPLUS_FS is not set # CONFIG_HFS_FS is not set CONFIG_HIBERNATION=y -CONFIG_HIBERNATION_SMP_POSSIBLE=y +CONFIG_HIBERNATION_UP_POSSIBLE=y CONFIG_HID=y CONFIG_HID_SUPPORT=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set -# CONFIG_HIGH_RES_TIMERS is not set # CONFIG_HOSTAP is not set -CONFIG_HOTPLUG_CPU=y # CONFIG_HPET_TIMER is not set CONFIG_HT_IRQ=y # CONFIG_HUGETLBFS is not set @@ -230,14 +208,11 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_IB700_WDT is not set # CONFIG_IBMASR is not set # CONFIG_IBM_ASM is not set -CONFIG_IDE=y -# CONFIG_IDEDMA_IVB is not set -# CONFIG_IDEDMA_ONLYDISK is not set -CONFIG_IDEPCI_PCIBUS_ORDER=y +CONFIG_IDE=m +# CONFIG_IDEPCI_PCIBUS_ORDER is not set CONFIG_IDEPCI_SHARE_IRQ=y # CONFIG_IDE_ARM is not set -# CONFIG_IDE_CHIPSETS is not set -CONFIG_IDE_GENERIC=y +CONFIG_IDE_GENERIC=m # CONFIG_IDE_PROC_FS is not set # CONFIG_IEEE80211 is not set # CONFIG_INET6_TUNNEL is not set @@ -283,9 +258,7 @@ CONFIG_INSTRUMENTATION=y # CONFIG_IP_NF_TARGET_TOS is not set # CONFIG_IP_NF_TARGET_TTL is not set # CONFIG_IP_NF_TARGET_ULOG is not set -CONFIG_IRQBALANCE=y -CONFIG_ISA=y -CONFIG_ISAPNP=y +# CONFIG_ISA is not set CONFIG_ISA_DMA_API=y # CONFIG_ISDN is not set # CONFIG_ISO9660_FS is not set @@ -303,10 +276,8 @@ CONFIG_KMOD=y # CONFIG_KPROBES is not set CONFIG_KTIME_SCALAR=y # CONFIG_KVM is not set -# CONFIG_LANCE is not set CONFIG_LCD_CLASS_DEVICE=y CONFIG_LOCALVERSION_AUTO=y -CONFIG_LOCK_KERNEL=y # CONFIG_LOGO is not set # CONFIG_M386 is not set # CONFIG_M486 is not set @@ -316,19 +287,17 @@ CONFIG_LOCK_KERNEL=y # CONFIG_M686 is not set # CONFIG_MACHZ_WDT is not set # CONFIG_MACINTOSH_DRIVERS is not set -CONFIG_MATH_EMULATION=y +# CONFIG_MATH_EMULATION is not set # CONFIG_MCA is not set # CONFIG_MCORE2 is not set # CONFIG_MCRUSOE is not set # CONFIG_MCYRIXIII is not set -# CONFIG_MDA_CONSOLE is not set # CONFIG_MEFFICEON is not set # CONFIG_MGEODEGX1 is not set CONFIG_MGEODE_LX=y CONFIG_MICROCODE=y CONFIG_MICROCODE_OLD_INTERFACE=y # CONFIG_MINIX_FS is not set -# CONFIG_MIXCOMWD is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set @@ -383,14 +352,14 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y # CONFIG_MTD_MAP_BANK_WIDTH_8 is not set # CONFIG_MTD_MTDRAM is not set CONFIG_MTD_NAND=y -# CONFIG_MTD_NAND_CAFE is not set +CONFIG_MTD_NAND_CAFE=y # CONFIG_MTD_NAND_CS553X is not set # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_ECC_SMC is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set # CONFIG_MTD_NAND_NANDSIM is not set -CONFIG_MTD_NAND_PLATFORM=y +# CONFIG_MTD_NAND_PLATFORM is not set # CONFIG_MTD_NAND_VERIFY_WRITE is not set # CONFIG_MTD_ONENAND is not set CONFIG_MTD_OOPS=y @@ -404,7 +373,7 @@ CONFIG_MTD_PCI=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_TS5500 is not set -CONFIG_MTRR=y +# CONFIG_MTRR is not set # CONFIG_MVIAC3_2 is not set # CONFIG_MVIAC7 is not set # CONFIG_MWINCHIP2 is not set @@ -449,8 +418,6 @@ CONFIG_NETDEV_1000=y # CONFIG_NET_SCH_TBF is not set # CONFIG_NET_SCH_TEQL is not set CONFIG_NET_VENDOR_3COM=y -# CONFIG_NET_VENDOR_RACAL is not set -# CONFIG_NET_VENDOR_SMC is not set # CONFIG_NFSD is not set # CONFIG_NFS_FS is not set # CONFIG_NF_CONNTRACK_AMANDA is not set @@ -466,8 +433,6 @@ CONFIG_NET_VENDOR_3COM=y # CONFIG_NF_NAT_SNMP_BASIC is not set # CONFIG_NLS is not set CONFIG_NOHIGHMEM=y -# CONFIG_NO_HZ is not set -CONFIG_NR_CPUS=8 CONFIG_NR_QUICK=1 CONFIG_NSC_GPIO=m CONFIG_NVRAM=y @@ -478,8 +443,6 @@ CONFIG_PAGE_OFFSET=0xC0000000 # CONFIG_PARAVIRT is not set CONFIG_PC8736x_GPIO=m # CONFIG_PC87413_WDT is not set -CONFIG_PCCARD=m -CONFIG_PCCARD_NONSTATIC=m # CONFIG_PCIEPORTBUS is not set # CONFIG_PCIPCWATCHDOG is not set CONFIG_PCI_DIRECT=y @@ -490,8 +453,6 @@ CONFIG_PCI_DIRECT=y CONFIG_PCI_GOOLPC=y # CONFIG_PCI_MSI is not set CONFIG_PCI_OLPC=y -CONFIG_PCMCIA_PROBE=y -# CONFIG_PCWATCHDOG is not set # CONFIG_PDA_POWER is not set CONFIG_PHYSICAL_ALIGN=0x100000 CONFIG_PHYSICAL_START=0x100000 @@ -499,22 +460,20 @@ CONFIG_PM=y CONFIG_PM_DEBUG=y CONFIG_PM_LEGACY=y CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y CONFIG_PM_STD_PARTITION="" # CONFIG_PM_TRACE is not set # CONFIG_PM_VERBOSE is not set -CONFIG_PNP=y -# CONFIG_PNPACPI is not set -# CONFIG_PNPBIOS is not set -# CONFIG_PNP_DEBUG is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set # CONFIG_PPP_MPPE is not set # CONFIG_PPP_SYNC_TTY is not set -CONFIG_PREEMPT_BKL=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y # CONFIG_PRISM54 is not set # CONFIG_PROMFS_FS is not set CONFIG_QUICKLIST=y +CONFIG_REED_SOLOMON=y +CONFIG_REED_SOLOMON_DEC16=y CONFIG_RELAY=y # CONFIG_RELOCATABLE is not set CONFIG_RTC=y @@ -523,19 +482,13 @@ CONFIG_RWSEM_XCHGADD_ALGORITHM=y # CONFIG_SBC_EPX_C3_WATCHDOG is not set # CONFIG_SC1200_WDT is not set # CONFIG_SC520_WDT is not set -CONFIG_SCHED_MC=y -CONFIG_SCHED_SMT=y CONFIG_SCSI=y CONFIG_SCSI_WAIT_SCAN=m -CONFIG_SCx200=y -CONFIG_SCx200HR_TIMER=y +# CONFIG_SCx200 is not set # CONFIG_SCx200_ACB is not set -# CONFIG_SCx200_GPIO is not set -CONFIG_SCx200_WDT=m CONFIG_SEMAPHORE_SLEEPERS=y # CONFIG_SERIAL_8250_EXTENDED is not set CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_PNP=y CONFIG_SERIO=y # CONFIG_SERIO_CT82C710 is not set CONFIG_SERIO_I8042=y @@ -543,24 +496,35 @@ CONFIG_SERIO_LIBPS2=y # CONFIG_SERIO_PCIPS2 is not set # CONFIG_SERIO_RAW is not set CONFIG_SERIO_SERPORT=y -CONFIG_SMP=y +# CONFIG_SMP is not set # CONFIG_SMSC37B787_WDT is not set # CONFIG_SOFT_WATCHDOG is not set # CONFIG_SONYPI is not set # CONFIG_SOUND is not set CONFIG_SPARSEMEM_STATIC=y -CONFIG_STOP_MACHINE=y CONFIG_SUSPEND=y -CONFIG_SUSPEND_SMP_POSSIBLE=y CONFIG_SYSVIPC_SYSCTL=y # CONFIG_TELCLOCK is not set -# CONFIG_TICK_ONESHOT is not set +CONFIG_TICK_ONESHOT=y # CONFIG_TOSHIBA is not set # CONFIG_TUN is not set # CONFIG_TYPHOON is not set # CONFIG_UDF_FS is not set CONFIG_UID16=y -# CONFIG_USB is not set +CONFIG_USB=y +# CONFIG_USBPCWATCHDOG is not set +CONFIG_USB_EHCI_HCD=y +CONFIG_USB_EHCI_ROOT_HUB_TT=y +CONFIG_USB_EHCI_SPLIT_ISO=y +CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set +# CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set +CONFIG_USB_OHCI_HCD=y +# CONFIG_USB_PERSIST is not set +# CONFIG_USB_R8A66597_HCD is not set +CONFIG_USB_STORAGE=y +# CONFIG_USB_SUSPEND is not set +CONFIG_USB_UHCI_HCD=y # CONFIG_USER_NS is not set # CONFIG_VFAT_FS is not set CONFIG_VGACON_SOFT_SCROLLBACK=y @@ -584,7 +548,6 @@ CONFIG_VT=y CONFIG_VT_CONSOLE=y # CONFIG_VT_HW_CONSOLE_BINDING is not set # CONFIG_WAFER_WDT is not set -# CONFIG_WDT is not set CONFIG_X86=y CONFIG_X86_32=y # CONFIG_X86_BIGSMP is not set @@ -597,15 +560,12 @@ CONFIG_X86_CMPXCHG=y CONFIG_X86_FIND_SMP_CONFIG=y CONFIG_X86_GENERIC=y # CONFIG_X86_GENERICARCH is not set -CONFIG_X86_HT=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_INVLPG=y CONFIG_X86_IO_APIC=y CONFIG_X86_L1_CACHE_SHIFT=7 CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_MCE=y -# CONFIG_X86_MCE_NONFATAL is not set -# CONFIG_X86_MCE_P4THERMAL is not set +# CONFIG_X86_MCE is not set CONFIG_X86_MINIMUM_CPU_FAMILY=4 CONFIG_X86_MPPARSE=y # CONFIG_X86_MSR is not set @@ -614,10 +574,10 @@ CONFIG_X86_MPPARSE=y CONFIG_X86_PC=y CONFIG_X86_POPAD_OK=y # CONFIG_X86_REBOOTFIXUPS is not set -CONFIG_X86_SMP=y # CONFIG_X86_SUMMIT is not set -CONFIG_X86_TRAMPOLINE=y CONFIG_X86_TSC=y +CONFIG_X86_UP_APIC=y +CONFIG_X86_UP_IOAPIC=y CONFIG_X86_USE_3DNOW=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_X86_VISWS is not set @@ -625,8 +585,3 @@ CONFIG_X86_USE_PPRO_CHECKSUM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_XADD=y # CONFIG_XFS_FS is not set -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_TOSHIBA=y diff --git a/target/linux/olpc/image/Config.in b/target/linux/olpc/image/Config.in index 6252ae6d1f..295f916770 100644 --- a/target/linux/olpc/image/Config.in +++ b/target/linux/olpc/image/Config.in @@ -1,35 +1,23 @@ -config OLPC_GRUB_IMAGES - bool "Build GRUB images" +config OLPC_BOOTSCRIPT_IMAGES + bool "Build images with bootscript" depends TARGET_olpc depends TARGET_ROOTFS_EXT2FS || TARGET_ROOTFS_JFFS2 || TARGET_ROOTFS_SQUASHFS || TARGET_ROOTFS_ISO - select PACKAGE_grub default y -config OLPC_GRUB_IMAGES_PAD - bool "Pad GRUB images to filesystem size (for JFFS2)" - depends OLPC_GRUB_IMAGES +config OLPC_BOOTSCRIPT_IMAGES_PAD + bool "Pad bootscript images to filesystem size (for JFFS2)" + depends OLPC_BOOTSCRIPT_IMAGES -config OLPC_GRUB_BAUDRATE - int "Serial port baud rate" - depends OLPC_GRUB_IMAGES - default 38400 - -config OLPC_GRUB_KERNELPART +config OLPC_BOOTSCRIPT_KERNELPART int "Kernel partition size (in MB)" - depends OLPC_GRUB_IMAGES + depends OLPC_BOOTSCRIPT_IMAGES default 4 -config OLPC_GRUB_ROOTPART +config OLPC_BOOTSCRIPT_ROOTPART string - prompt "Root partition on target device" if OLPC_GRUB_IMAGES + prompt "Root partition on target device" if OLPC_BOOTSCRIPT_IMAGES default "/dev/hda2" help The root partition on the final device. If you don't know, you probably want the default (/dev/hda2). -config OLPC_GRUB_BOOTOPTS - string - prompt "Extra kernel boot options" if OLPC_GRUB_IMAGES - default "" - help - If you don't know, just leave it blank. diff --git a/target/linux/olpc/image/Makefile b/target/linux/olpc/image/Makefile index b6d95042aa..b433ac45a0 100644 --- a/target/linux/olpc/image/Makefile +++ b/target/linux/olpc/image/Makefile @@ -8,12 +8,11 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk export PATH=$(TARGET_PATH):/sbin -BOOTOPTS=$(strip $(subst ",, $(CONFIG_OLPC_GRUB_BOOTOPTS))) -ROOTPART=$(strip $(subst ",, $(CONFIG_OLPC_GRUB_ROOTPART))) +ROOTPART=$(strip $(subst ",, $(CONFIG_OLPC_BOOTSCRIPT_ROOTPART))) #"))")) # fix vim's broken syntax highlighting -ifeq ($(CONFIG_OLPC_GRUB_IMAGES),y) +ifeq ($(CONFIG_OLPC_BOOTSCRIPT_IMAGES),y) define Image/cmdline/squashfs block2mtd.block2mtd=$(ROOTPART),65536,rootfs root=/dev/mtdblock0 rootfstype=squashfs init=/etc/preinit endef @@ -30,37 +29,18 @@ ifeq ($(CONFIG_OLPC_GRUB_IMAGES),y) root=$(ROOTPART) rootfstype=ext2 init=/etc/preinit endef - define Image/Build/grub + define Image/Build/bootscript # left here because the image builder doesnt need these - $(INSTALL_DIR) $(KDIR)/root.grub/boot/grub - $(CP) \ - $(KDIR)/*stage* \ - $(KDIR)/root.grub/boot/grub/ - $(CP) $(KDIR)/bzImage $(KDIR)/root.grub/boot/vmlinuz - $(CP) ./olpc.fth $(KDIR)/root.grub/boot/olpc.fth - sed \ - -e 's#@CMDLINE@#$(strip $(call Image/cmdline/$(1))) $(BOOTOPTS)#g' \ - -e 's#@BAUDRATE@#$(CONFIG_OLPC_GRUB_BAUDRATE)#g' \ - ./menu.lst > $(KDIR)/root.grub/boot/grub/menu.lst - PADDING="$(CONFIG_OLPC_GRUB_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image $(CONFIG_OLPC_GRUB_KERNELPART) $(KDIR)/root.grub $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1) - $(call Image/Build/grub/$(1)) - endef -endif - -ifeq ($(CONFIG_OLPC_GRUB_IMAGES),y) - define Image/Prepare/grub - # for the image builder - $(CP) \ - $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage1 \ - $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/stage2 \ - $(STAGING_DIR_HOST)/usr/lib/grub/i386-pc/e2fs_stage1_5 \ - $(KDIR)/ + $(INSTALL_DIR) $(KDIR)/root.bootscript/boot + $(CP) $(KDIR)/bzImage $(KDIR)/root.bootscript/boot/vmlinuz + $(CP) ./olpc.fth $(KDIR)/root.bootscript/boot/olpc.fth + PADDING="$(CONFIG_OLPC_BOOTSCRIPT_IMAGES_PAD)" PATH="$(TARGET_PATH)" ./gen_image.sh $(BIN_DIR)/openwrt-$(BOARD)-$(1).image $(CONFIG_OLPC_BOOTSCRIPT_KERNELPART) $(KDIR)/root.bootscript $(CONFIG_TARGET_ROOTFS_FSPART) $(KDIR)/root.$(1) endef endif define Image/Prepare $(CP) $(LINUX_DIR)/arch/i386/boot/bzImage $(KDIR)/bzImage - $(call Image/Prepare/grub) + $(call Image/Prepare/bootscript) endef define Image/Build/squashfs @@ -73,7 +53,7 @@ endef define Image/Build $(call Image/Build/$(1)) - $(call Image/Build/grub,$(1)) + $(call Image/Build/bootscript,$(1)) $(CP) $(KDIR)/root.$(1) $(BIN_DIR)/openwrt-$(BOARD)-$(1).fs $(CP) $(KDIR)/bzImage $(BIN_DIR)/openwrt-$(BOARD)-vmlinuz endef diff --git a/target/linux/olpc/image/gen_image.sh b/target/linux/olpc/image/gen_image.sh index d48e3720dc..4fd6e377e5 100755 --- a/target/linux/olpc/image/gen_image.sh +++ b/target/linux/olpc/image/gen_image.sh @@ -1,5 +1,5 @@ #!/usr/bin/env bash -# Copyright (C) 2006 OpenWrt.org +# Copyright (C) 2006 - 2007 OpenWrt.org set -x [ $# == 5 ] || { echo "SYNTAX: $0 " @@ -33,13 +33,3 @@ dd if="$OUTPUT.kernel" of="$OUTPUT" bs=512 seek="$KERNELOFFSET" conv=notrunc [ -n "$PADDING" ] && dd if=/dev/zero of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc count="$ROOTFSSIZE" dd if="$ROOTFSIMAGE" of="$OUTPUT" bs=512 seek="$ROOTFSOFFSET" conv=notrunc #rm -f "$OUTPUT.kernel" - -which chpax >/dev/null && chpax -zp $(which grub) -grub --batch --no-curses --no-floppy --device-map=/dev/null < #include #include +#include ++#include #define VERSION "$Revision: 1.30 $" -@@ -27,6 +28,12 @@ +@@ -27,6 +29,12 @@ #define ERROR(fmt, args...) printk(KERN_ERR "block2mtd: " fmt "\n" , ## args) #define INFO(fmt, args...) printk(KERN_INFO "block2mtd: " fmt "\n" , ## args) @@ -23,7 +24,7 @@ Index: linux-2.6.23/drivers/mtd/devices/block2mtd.c /* Info for the block device */ struct block2mtd_dev { -@@ -38,10 +45,36 @@ +@@ -38,10 +46,36 @@ char devname[0]; }; @@ -60,7 +61,7 @@ Index: linux-2.6.23/drivers/mtd/devices/block2mtd.c static struct page *page_read(struct address_space *mapping, int index) { -@@ -518,7 +551,10 @@ +@@ -518,7 +552,10 @@ if (token[2] && (strlen(token[2]) + 1 > 80)) parse_err("mtd device name too long"); @@ -72,7 +73,7 @@ Index: linux-2.6.23/drivers/mtd/devices/block2mtd.c return 0; } -@@ -534,8 +570,11 @@ +@@ -534,8 +571,11 @@ and block2mtd_init() has already been called, we can parse the argument now. */ @@ -87,8 +88,8 @@ Index: linux-2.6.23/drivers/mtd/devices/block2mtd.c here. We must parse them later: if the param passed Index: linux-2.6.23/init/do_mounts.c =================================================================== ---- linux-2.6.23.orig/init/do_mounts.c 2007-10-25 21:39:41.824977672 +0200 -+++ linux-2.6.23/init/do_mounts.c 2007-10-25 21:41:22.466712918 +0200 +--- linux-2.6.23.orig/init/do_mounts.c 2007-12-06 23:30:28.019082737 +0100 ++++ linux-2.6.23/init/do_mounts.c 2007-12-06 23:30:32.459335774 +0100 @@ -241,16 +241,8 @@ return 1; } @@ -127,8 +128,8 @@ Index: linux-2.6.23/init/do_mounts.c if (!strncmp(root_device_name, "mtd", 3)) { Index: linux-2.6.23/init/main.c =================================================================== ---- linux-2.6.23.orig/init/main.c 2007-10-25 21:35:50.567799083 +0200 -+++ linux-2.6.23/init/main.c 2007-10-25 21:56:43.279187031 +0200 +--- linux-2.6.23.orig/init/main.c 2007-12-06 23:30:28.023082962 +0100 ++++ linux-2.6.23/init/main.c 2007-12-06 23:30:32.463336000 +0100 @@ -65,6 +65,7 @@ #ifdef CONFIG_X86_LOCAL_APIC #include @@ -198,8 +199,8 @@ Index: linux-2.6.23/init/main.c Index: linux-2.6.23/arch/i386/kernel/vmlinux.lds.S =================================================================== ---- linux-2.6.23.orig/arch/i386/kernel/vmlinux.lds.S 2007-10-26 00:07:08.465118962 +0200 -+++ linux-2.6.23/arch/i386/kernel/vmlinux.lds.S 2007-10-26 00:10:15.259763782 +0200 +--- linux-2.6.23.orig/arch/i386/kernel/vmlinux.lds.S 2007-12-06 23:30:28.035083650 +0100 ++++ linux-2.6.23/arch/i386/kernel/vmlinux.lds.S 2007-12-06 23:30:32.467336225 +0100 @@ -146,6 +146,11 @@ INITCALLS __initcall_end = .; @@ -214,8 +215,8 @@ Index: linux-2.6.23/arch/i386/kernel/vmlinux.lds.S *(.con_initcall.init) Index: linux-2.6.23/include/asm-generic/vmlinux.lds.h =================================================================== ---- linux-2.6.23.orig/include/asm-generic/vmlinux.lds.h 2007-10-26 00:08:46.558708993 +0200 -+++ linux-2.6.23/include/asm-generic/vmlinux.lds.h 2007-10-26 00:09:24.296859571 +0200 +--- linux-2.6.23.orig/include/asm-generic/vmlinux.lds.h 2007-12-06 23:30:28.043084102 +0100 ++++ linux-2.6.23/include/asm-generic/vmlinux.lds.h 2007-12-06 23:30:32.467336225 +0100 @@ -243,12 +243,14 @@ *(.initcall4s.init) \ *(.initcall5.init) \