From: Daniel Linjama Date: Thu, 2 Mar 2023 09:05:22 +0000 (+0200) Subject: ath79: add support for D-Link COVR-P2500 A1 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a39a49e323e6731215bd2654e68d91a2df4672c7;p=openwrt%2Fstaging%2Fthess.git ath79: add support for D-Link COVR-P2500 A1 Specifications: * QCA9563, 16 MiB flash, 128 MiB RAM, 2T2R 802.11n * QCA9886 2T2R 801.11ac Wave 2 * QCA7550 Homeplug AV2 1300 * AR8337, 3 Gigabit ports (1, 2: LAN; 3: WAN) To make use of PLC functionality, firmware needs to be provided via plchost (QCA7550 comes without SPI NOR), patched with the Network Password and MAC. Flashing via OEM Web Interface * Flash 'factory.bin' using web-interface * Wait until firmware succesfully installed and device booted * Hold down reset button to reset factory defaults (~10 seconds) Flashing via Recovery Web Interface: * Hold down reset button during power-on (~10 seconds) * Recovery Web UI is at 192.168.0.50, no DHCP. * Flash 'recovery.bin' with scripts/flashing/dlink_recovery_upload.py (Recovery Web UI does not work with modern OSes) Return to stock * Hold down reset button during power-on (~10 seconds) * Recovery Web UI is at 192.168.0.50, no DHCP. * Flash unencrypted stock firmware with scripts/flashing/dlink_recovery_upload.py (Recovery Web UI does not work with modern OSes) Co-developed-by: Sebastian Schaper Signed-off-by: Sebastian Schaper Signed-off-by: Daniel Linjama --- diff --git a/target/linux/ath79/dts/qca9563_dlink_covr-p2500-a1.dts b/target/linux/ath79/dts/qca9563_dlink_covr-p2500-a1.dts new file mode 100644 index 0000000000..43113ea7b5 --- /dev/null +++ b/target/linux/ath79/dts/qca9563_dlink_covr-p2500-a1.dts @@ -0,0 +1,211 @@ +// SPDX-License-Identifier: GPL-2.0-or-later OR MIT + +#include "qca956x.dtsi" + +#include +#include +#include + +/ { + compatible = "dlink,covr-p2500-a1", "qca,qca9563"; + model = "D-Link COVR-P2500 A1"; + + aliases { + led-boot = &led_power_green; + led-failsafe = &led_power_red; + led-running = &led_power_green; + led-upgrade = &led_power_red; + }; + + keys { + compatible = "gpio-keys"; + + wps { + label = "wps"; + linux,code = ; + gpios = <&gpio 1 GPIO_ACTIVE_LOW>; + }; + + reset { + label = "reset"; + linux,code = ; + gpios = <&gpio 2 GPIO_ACTIVE_LOW>; + }; + }; + + leds { + compatible = "gpio-leds"; + pinctrl-names = "default"; + pinctrl-0 = <&jtag_disable_pins>; + + lan { + label = "green:lan"; + gpios = <&gpio 6 GPIO_ACTIVE_LOW>; + }; + + led_power_green: power_green { + label = "green:power"; + gpios = <&gpio 7 GPIO_ACTIVE_LOW>; + default-state = "on"; + }; + + wlan5g { + label = "green:wlan5g"; + gpios = <&gpio 8 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy0radio"; + }; + + led_power_red: power_red { + label = "red:power"; + gpios = <&gpio 15 GPIO_ACTIVE_LOW>; + }; + + wlan2g { + label = "green:wlan2g"; + gpios = <&gpio 19 GPIO_ACTIVE_LOW>; + linux,default-trigger = "phy1radio"; + }; + }; + + virtual_flash { + compatible = "mtd-concat"; + + devices = <&fwconcat0 &fwconcat1>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + compatible = "openwrt,uimage", "denx,uimage"; + openwrt,ih-magic = <0x68737173>; + label = "firmware"; + reg = <0x0 0x0>; + }; + }; + }; +}; + +&spi { + status = "okay"; + + flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <50000000>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "u-boot"; + reg = <0x0 0x40000>; + read-only; + }; + + partition@40000 { + label = "u-boot-env"; + reg = <0x40000 0x10000>; + read-only; + }; + + fwconcat0: partition@50000 { + label = "fwconcat0"; + reg = <0x50000 0xe30000>; + }; + + partition@e80000 { + label = "loader"; + reg = <0xe80000 0x10000>; + read-only; + }; + + fwconcat1: partition@e90000 { + label = "fwconcat1"; + reg = <0xe90000 0x160000>; + }; + + art: partition@ff0000 { + label = "art"; + reg = <0xff0000 0x10000>; + read-only; + + compatible = "nvmem-cells"; + + nvmem-layout { + compatible = "fixed-layout"; + #address-cells = <1>; + #size-cells = <1>; + + calibration_ath9k: calibration@1000 { + reg = <0x1000 0x440>; + }; + + precalibration_ath10k: pre-calibration@5000 { + reg = <0x5000 0x2f20>; + }; + }; + }; + }; + }; +}; + +&pcie { + status = "okay"; + + wifi@0,0 { + compatible = "qcom,ath10k"; + reg = <0 0 0 0 0>; + + nvmem-cells = <&precalibration_ath10k>; + nvmem-cell-names = "pre-calibration"; + }; +}; + +&gpio { + phy-reset { + gpio-hog; + gpios = <11 GPIO_ACTIVE_LOW>; + output-low; + line-name = "phy-reset"; + }; +}; + +&mdio0 { + status = "okay"; + + phy0: ethernet-phy@0 { + reg = <0>; + phy-mode = "sgmii"; + qca,mib-poll-interval = <500>; + + qca,ar8327-initvals = < + 0x04 0x00080080 /* PORT0 PAD MODE CTRL */ + 0x10 0x81000080 /* POWER_ON_STRAP */ + 0x50 0xcc35cc35 /* LED_CTRL0 */ + 0x54 0xcb37cb37 /* LED_CTRL1 */ + 0x58 0x00000000 /* LED_CTRL2 */ + 0x5c 0x00f3cf00 /* LED_CTRL3 */ + 0x7c 0x0000007e /* PORT0_STATUS */ + >; + }; +}; + +ð0 { + status = "okay"; + + pll-data = <0x03000101 0x00000101 0x00001919>; + + phy-mode = "sgmii"; + phy-handle = <&phy0>; +}; + +&wmac { + status = "okay"; + + nvmem-cells = <&calibration_ath9k>; + nvmem-cell-names = "calibration"; +}; diff --git a/target/linux/ath79/generic/base-files/etc/board.d/01_leds b/target/linux/ath79/generic/base-files/etc/board.d/01_leds index 4ee347c141..c1d411b9a9 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/01_leds +++ b/target/linux/ath79/generic/base-files/etc/board.d/01_leds @@ -230,6 +230,9 @@ devolo,dlan-pro-1200plus-ac|\ devolo,magic-2-wifi) ucidef_set_led_netdev "plcw" "dLAN" "white:dlan" "eth0.1" "rx" ;; +dlink,covr-p2500-a1) + ucidef_set_led_switch "lan" "LAN" "green:lan" "switch0" "0x0e" "" "link" + ;; dlink,dap-1330-a1|\ dlink,dap-1365-a1) ucidef_set_rssimon "wlan0" "200000" "1" diff --git a/target/linux/ath79/generic/base-files/etc/board.d/02_network b/target/linux/ath79/generic/base-files/etc/board.d/02_network index 5d87ea8405..a9b78e4350 100644 --- a/target/linux/ath79/generic/base-files/etc/board.d/02_network +++ b/target/linux/ath79/generic/base-files/etc/board.d/02_network @@ -286,6 +286,10 @@ ath79_setup_interfaces() ucidef_add_switch "switch0" \ "0@eth0" "2:wan" "3:lan" "4:lan" ;; + dlink,covr-p2500-a1) + ucidef_add_switch "switch0" \ + "0@eth0" "1:lan" "2:lan" "3:wan" "4:plc" + ;; dlink,dap-2695-a1) ucidef_add_switch "switch0" \ "0@eth0" "2:lan" "3:wan" "6@eth1" @@ -634,6 +638,13 @@ ath79_setup_macs() devolo,magic-2-wifi) label_mac=$(macaddr_add "$(mtd_get_mac_binary art 0x1002)" 3) ;; + dlink,covr-p2500-a1) + lan_mac=$(mtd_get_mac_ascii art "protest_lan_mac") + wan_mac=$(mtd_get_mac_ascii art "protest_lan_mac") + label_mac=$(mtd_get_mac_ascii art "protest_plc_mac") + plc_mac=$(mtd_get_mac_ascii art "protest_plc_mac") + [ -n "$plc_mac" ] && ucidef_set_interface_macaddr "plc" $plc_mac + ;; dlink,dap-1330-a1|\ dlink,dap-1365-a1|\ dlink,dch-g020-a1) diff --git a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac index 5d74208a5d..ccff35e5c6 100644 --- a/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac +++ b/target/linux/ath79/generic/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac @@ -17,6 +17,12 @@ case "$board" in adtran,bsap1840) macaddr_add "$(mtd_get_mac_binary 'Board data' 2)" $(($PHYNBR * 8 + 1)) > /sys${DEVPATH}/macaddress ;; + dlink,covr-p2500-a1) + [ "$PHYNBR" -eq 0 ] && \ + mtd_get_mac_ascii art "protest_ath1_mac" > /sys${DEVPATH}/macaddress + [ "$PHYNBR" -eq 1 ] && \ + mtd_get_mac_ascii art "protest_ath0_mac" > /sys${DEVPATH}/macaddress + ;; dlink,dap-1330-a1|\ dlink,dap-1365-a1|\ dlink,dch-g020-a1) diff --git a/target/linux/ath79/image/generic.mk b/target/linux/ath79/image/generic.mk index b74ce34509..e6e78b9287 100644 --- a/target/linux/ath79/image/generic.mk +++ b/target/linux/ath79/image/generic.mk @@ -33,6 +33,17 @@ define Build/cybertan-trx -rm $@-empty.bin endef +define Build/dlink-sge-signature + ( \ + crc=$$(gzip -c $@ | tail -c 8 | od -An -tx4 --endian little | cut -d " " -f2); \ + cat $@; \ + $(MKHASH) md5 $@ ; \ + echo $(1); \ + echo -n $$crc; \ + ) > $@.new + mv $@.new $@ +endef + define Build/edimax-headers $(eval edimax_magic=$(word 1,$(1))) $(eval edimax_model=$(word 2,$(1))) @@ -995,6 +1006,26 @@ define Device/devolo_magic-2-wifi endef TARGET_DEVICES += devolo_magic-2-wifi +define Device/dlink_covr-p2500-a1 + $(Device/loader-okli-uimage) + SOC := qca9563 + DEVICE_VENDOR := D-Link + DEVICE_MODEL := COVR-P2500 + DEVICE_VARIANT := A1 + DEVICE_PACKAGES := kmod-ath10k-ct ath10k-firmware-qca9888-ct + LOADER_FLASH_OFFS := 0x050000 + LOADER_KERNEL_MAGIC := 0x68737173 + KERNEL := kernel-bin | append-dtb | lzma | uImage lzma -M 0x68737173 + IMAGE_SIZE := 14528k + IMAGES += factory.bin recovery.bin + IMAGE/recovery.bin := append-kernel | pad-to $$$$(BLOCKSIZE) | \ + append-rootfs | pad-rootfs | check-size | pad-to 14528k | \ + append-loader-okli-uimage $(1) | pad-to 15616k + IMAGE/factory.bin := $$(IMAGE/recovery.bin) | \ + dlink-sge-image COVR-P2500 | dlink-sge-signature COVR-P2500 +endef +TARGET_DEVICES += dlink_covr-p2500-a1 + define Device/dlink_dap-13xx SOC := qca9533 DEVICE_VENDOR := D-Link