From: Florian Fainelli Date: Mon, 24 Mar 2014 23:36:47 +0000 (-0700) Subject: net: phy: bcm7xxx: define constants for our registers X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a3622f2c824135a7ce235a61bf9ff5688e8f576b;p=openwrt%2Fstaging%2Fblogic.git net: phy: bcm7xxx: define constants for our registers Define constants for the various registers used in bcm7xxx_28nm_afe_config_init() to help clarify what this workaround is about. Signed-off-by: Florian Fainelli Signed-off-by: David S. Miller --- diff --git a/drivers/net/phy/bcm7xxx.c b/drivers/net/phy/bcm7xxx.c index 697337220016..314194179168 100644 --- a/drivers/net/phy/bcm7xxx.c +++ b/drivers/net/phy/bcm7xxx.c @@ -28,6 +28,22 @@ #define MII_BCM7XXX_TEST 0x1f #define MII_BCM7XXX_SHD_MODE_2 BIT(2) +/* 28nm only register definitions */ +#define MISC_ADDR(base, channel) base, channel + +#define DSP_TAP10 MISC_ADDR(0x0a, 0) +#define PLL_PLLCTRL_1 MISC_ADDR(0x32, 1) +#define PLL_PLLCTRL_2 MISC_ADDR(0x32, 2) +#define PLL_PLLCTRL_4 MISC_ADDR(0x33, 0) + +#define AFE_RXCONFIG_0 MISC_ADDR(0x38, 0) +#define AFE_RXCONFIG_1 MISC_ADDR(0x38, 1) +#define AFE_RX_LP_COUNTER MISC_ADDR(0x38, 3) +#define AFE_TX_CONFIG MISC_ADDR(0x39, 0) +#define AFE_HPF_TRIM_OTHERS MISC_ADDR(0x3a, 0) + +#define CORE_EXPB0 0xb0 + static int bcm7445_config_init(struct phy_device *phydev) { int ret; @@ -88,44 +104,44 @@ static void phy_write_misc(struct phy_device *phydev, static int bcm7xxx_28nm_afe_config_init(struct phy_device *phydev) { /* write AFE_RXCONFIG_0 */ - phy_write_misc(phydev, 0x38, 0x0000, 0xeb19); + phy_write_misc(phydev, AFE_RXCONFIG_0, 0xeb19); /* write AFE_RXCONFIG_1 */ - phy_write_misc(phydev, 0x38, 0x0001, 0x9a3f); + phy_write_misc(phydev, AFE_RXCONFIG_1, 0x9a3f); /* write AFE_RX_LP_COUNTER */ - phy_write_misc(phydev, 0x38, 0x0003, 0x7fc7); + phy_write_misc(phydev, AFE_RX_LP_COUNTER, 0x7fc7); /* write AFE_HPF_TRIM_OTHERS */ - phy_write_misc(phydev, 0x3A, 0x0000, 0x000b); + phy_write_misc(phydev, AFE_HPF_TRIM_OTHERS, 0x000b); /* write AFTE_TX_CONFIG */ - phy_write_misc(phydev, 0x39, 0x0000, 0x0800); + phy_write_misc(phydev, AFE_TX_CONFIG, 0x0800); /* Increase VCO range to prevent unlocking problem of PLL at low * temp */ - phy_write_misc(phydev, 0x0032, 0x0001, 0x0048); + phy_write_misc(phydev, PLL_PLLCTRL_1, 0x0048); /* Change Ki to 011 */ - phy_write_misc(phydev, 0x0032, 0x0002, 0x021b); + phy_write_misc(phydev, PLL_PLLCTRL_2, 0x021b); /* Disable loading of TVCO buffer to bandgap, set bandgap trim * to 111 */ - phy_write_misc(phydev, 0x0033, 0x0000, 0x0e20); + phy_write_misc(phydev, PLL_PLLCTRL_4, 0x0e20); /* Adjust bias current trim by -3 */ - phy_write_misc(phydev, 0x000a, 0x0000, 0x690b); + phy_write_misc(phydev, DSP_TAP10, 0x690b); /* Switch to CORE_BASE1E */ phy_write(phydev, MII_BCM7XXX_CORE_BASE1E, 0xd); /* Reset R_CAL/RC_CAL Engine */ - phy_write_exp(phydev, 0x00b0, 0x0010); + phy_write_exp(phydev, CORE_EXPB0, 0x0010); /* Disable Reset R_CAL/RC_CAL Engine */ - phy_write_exp(phydev, 0x00b0, 0x0000); + phy_write_exp(phydev, CORE_EXPB0, 0x0000); return 0; }