From: Grant Likely Date: Sun, 6 May 2007 15:38:51 +0000 (+1000) Subject: [POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a3481197783c187707090504062488862768260a;p=openwrt%2Fstaging%2Fblogic.git [POWERPC] Don't shutdown TX on mpc5200 serial port if it is a console If the serial port gets shut down, then console output stalls. 9 out of 10 kernel hackers agree, this is a bad thing. Signed-off-by: Grant Likely Signed-off-by: Sylvain Munaut Signed-off-by: Paul Mackerras --- diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c index f8c1761eb57f..35f8b86cc78f 100644 --- a/drivers/serial/mpc52xx_uart.c +++ b/drivers/serial/mpc52xx_uart.c @@ -257,9 +257,10 @@ mpc52xx_uart_shutdown(struct uart_port *port) { struct mpc52xx_psc __iomem *psc = PSC(port); - /* Shut down the port, interrupt and all */ + /* Shut down the port. Leave TX active if on a console port */ out_8(&psc->command,MPC52xx_PSC_RST_RX); - out_8(&psc->command,MPC52xx_PSC_RST_TX); + if (!uart_console(port)) + out_8(&psc->command,MPC52xx_PSC_RST_TX); port->read_status_mask = 0; out_be16(&psc->mpc52xx_psc_imr,port->read_status_mask);