From: Aleksander Jan Bajkowski <olek2@wp.pl>
Date: Sun, 12 Mar 2023 09:59:21 +0000 (+0100)
Subject: lantiq: xway: add phy reset pin to AVM Fritz!Box 7320
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a32def781f5a840697e503f1da29de455a875bbc;p=openwrt%2Fstaging%2Flinusw.git

lantiq: xway: add phy reset pin to AVM Fritz!Box 7320

This commit adds the PHY reset gpio for the LAN1 port to the dts.
According to the GPL sources, gpios 34 and 36 are used on the AVM
FritzBox 7320 and 7330. The second port is unsupported.

The gpio assignment has been verified on the FritzBox 7330.

Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
---

diff --git a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
index 44b8a18dae..cd7b29ca6d 100644
--- a/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
+++ b/target/linux/lantiq/files/arch/mips/boot/dts/lantiq/ar9_avm_fritz7320.dts
@@ -98,9 +98,20 @@
 
 &gsw {
 	phy-mode = "mii";
+	phy-handle = <&phy0>;
 	nvmem-cells = <&macaddr_ath9k_cal_a91>;
 	nvmem-cell-names = "mac-address";
 	mac-address-increment = <(-2)>;
+
+	mdio-bus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			reset-gpios = <&gpio 36 GPIO_ACTIVE_LOW>;
+		};
+	};
 };
 
 &gpio {
@@ -108,6 +119,12 @@
 	pinctrl-0 = <&state_default>;
 
 	state_default: pinmux {
+		phy-rst {
+			lantiq,pins = "io36";
+			lantiq,pull = <0>;
+			lantiq,open-drain;
+			lantiq,output = <1>;
+		};
 		usb0_vbus {
 			lantiq,pins = "io50";
 			lantiq,pull = <0>;