From: Greg Kroah-Hartman Date: Mon, 17 May 2010 17:33:41 +0000 (-0700) Subject: USB: io_edgeport: checkpatch cleanups X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a320471147fe61ed9260295958f07cc23ec360c8;p=openwrt%2Fstaging%2Fblogic.git USB: io_edgeport: checkpatch cleanups Minor whitespace cleanups to make checkpatch happy. Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/usb/serial/io_edgeport.h b/drivers/usb/serial/io_edgeport.h index cb201c1f67f9..dced7ec65470 100644 --- a/drivers/usb/serial/io_edgeport.h +++ b/drivers/usb/serial/io_edgeport.h @@ -34,15 +34,15 @@ -/* The following table is used to map the USBx port number to +/* The following table is used to map the USBx port number to * the device serial number (or physical USB path), */ #define MAX_EDGEPORTS 64 struct comMapper { char SerialNumber[MAX_SERIALNUMBER_LEN+1]; /* Serial number/usb path */ - int numPorts; /* Number of ports */ - int Original[MAX_RS232_PORTS]; /* Port numbers set by IOCTL */ - int Port[MAX_RS232_PORTS]; /* Actual used port numbers */ + int numPorts; /* Number of ports */ + int Original[MAX_RS232_PORTS]; /* Port numbers set by IOCTL */ + int Port[MAX_RS232_PORTS]; /* Actual used port numbers */ }; @@ -51,7 +51,7 @@ struct comMapper { /* /proc/edgeport Interface * This interface uses read/write/lseek interface to talk to the edgeport driver * the following read functions are supported: */ -#define PROC_GET_MAPPING_TO_PATH 1 +#define PROC_GET_MAPPING_TO_PATH 1 #define PROC_GET_COM_ENTRY 2 #define PROC_GET_EDGE_MANUF_DESCRIPTOR 3 #define PROC_GET_BOOT_DESCRIPTOR 4 @@ -64,7 +64,7 @@ struct comMapper { /* the following write functions are supported: */ -#define PROC_SET_COM_MAPPING 1 +#define PROC_SET_COM_MAPPING 1 #define PROC_SET_COM_ENTRY 2 @@ -97,8 +97,8 @@ struct edgeport_product_info { __u8 BoardRev; /* PCB revision level (chg only if s/w visible) */ __u8 BootMajorVersion; /* Boot Firmware version: xx. */ - __u8 BootMinorVersion; /* yy. */ - __le16 BootBuildNumber; /* zzzz (LE format) */ + __u8 BootMinorVersion; /* yy. */ + __le16 BootBuildNumber; /* zzzz (LE format) */ __u8 FirmwareMajorVersion; /* Operational Firmware version:xx. */ __u8 FirmwareMinorVersion; /* yy. */ diff --git a/drivers/usb/serial/io_ionsp.h b/drivers/usb/serial/io_ionsp.h index 092e03d2dfc4..5cc591bae54d 100644 --- a/drivers/usb/serial/io_ionsp.h +++ b/drivers/usb/serial/io_ionsp.h @@ -89,10 +89,10 @@ All 16-bit fields are sent in little-endian (Intel) format. // struct int_status_pkt { - __u16 RxBytesAvail; // Additional bytes available to - // be read from Bulk IN pipe - __u16 TxCredits[ MAX_RS232_PORTS ]; // Additional space available in - // given port's TxBuffer + __u16 RxBytesAvail; // Additional bytes available to + // be read from Bulk IN pipe + __u16 TxCredits[MAX_RS232_PORTS]; // Additional space available in + // given port's TxBuffer }; @@ -115,24 +115,24 @@ struct int_status_pkt { #define IOSP_CMD_STAT_BIT 0x80 // If set, this is command/status header #define IS_CMD_STAT_HDR(Byte1) ((Byte1) & IOSP_CMD_STAT_BIT) -#define IS_DATA_HDR(Byte1) (! IS_CMD_STAT_HDR(Byte1)) +#define IS_DATA_HDR(Byte1) (!IS_CMD_STAT_HDR(Byte1)) #define IOSP_GET_HDR_PORT(Byte1) ((__u8) ((Byte1) & IOSP_PORT_MASK)) -#define IOSP_GET_HDR_DATA_LEN(Byte1, Byte2) ((__u16) ( ((__u16)((Byte1) & 0x78)) << 5) | (Byte2)) +#define IOSP_GET_HDR_DATA_LEN(Byte1, Byte2) ((__u16) (((__u16)((Byte1) & 0x78)) << 5) | (Byte2)) #define IOSP_GET_STATUS_CODE(Byte1) ((__u8) (((Byte1) & 0x78) >> 3)) // // These macros build the 1st and 2nd bytes for a data header // -#define IOSP_BUILD_DATA_HDR1(Port, Len) ((__u8) (((Port) | ((__u8) (((__u16) (Len)) >> 5) & 0x78 )))) +#define IOSP_BUILD_DATA_HDR1(Port, Len) ((__u8) (((Port) | ((__u8) (((__u16) (Len)) >> 5) & 0x78)))) #define IOSP_BUILD_DATA_HDR2(Port, Len) ((__u8) (Len)) // // These macros build the 1st and 2nd bytes for a command header // -#define IOSP_BUILD_CMD_HDR1(Port, Cmd) ((__u8) ( IOSP_CMD_STAT_BIT | (Port) | ((__u8) ((Cmd) << 3)) )) +#define IOSP_BUILD_CMD_HDR1(Port, Cmd) ((__u8) (IOSP_CMD_STAT_BIT | (Port) | ((__u8) ((Cmd) << 3)))) //-------------------------------------------------------------- @@ -194,24 +194,25 @@ struct int_status_pkt { // Define macros to simplify building of IOSP cmds // -#define MAKE_CMD_WRITE_REG(ppBuf, pLen, Port, Reg, Val) \ - do { \ - (*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1( (Port), IOSP_WRITE_UART_REG(Reg) ); \ - (*(ppBuf))[1] = (Val); \ - \ - *ppBuf += 2; \ - *pLen += 2; \ - } while (0) +#define MAKE_CMD_WRITE_REG(ppBuf, pLen, Port, Reg, Val) \ +do { \ + (*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port), \ + IOSP_WRITE_UART_REG(Reg)); \ + (*(ppBuf))[1] = (Val); \ + \ + *ppBuf += 2; \ + *pLen += 2; \ +} while (0) -#define MAKE_CMD_EXT_CMD(ppBuf, pLen, Port, ExtCmd, Param) \ - do { \ - (*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1( (Port), IOSP_EXT_CMD ); \ - (*(ppBuf))[1] = (ExtCmd); \ - (*(ppBuf))[2] = (Param); \ - \ - *ppBuf += 3; \ - *pLen += 3; \ - } while (0) +#define MAKE_CMD_EXT_CMD(ppBuf, pLen, Port, ExtCmd, Param) \ +do { \ + (*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port), IOSP_EXT_CMD); \ + (*(ppBuf))[1] = (ExtCmd); \ + (*(ppBuf))[2] = (Param); \ + \ + *ppBuf += 3; \ + *pLen += 3; \ +} while (0) @@ -310,16 +311,16 @@ struct int_status_pkt { // // IOSP_CMD_RX_CHECK_REQ // -// This command is used to assist in the implementation of the -// IOCTL_SERIAL_PURGE Windows IOCTL. -// This IOSP command tries to place a marker at the end of the RX -// queue in the Edgeport. If the Edgeport RX queue is full then -// the Check will be discarded. -// It is up to the device driver to timeout waiting for the -// RX_CHECK_RSP. If a RX_CHECK_RSP is received, the driver is -// sure that all data has been received from the edgeport and +// This command is used to assist in the implementation of the +// IOCTL_SERIAL_PURGE Windows IOCTL. +// This IOSP command tries to place a marker at the end of the RX +// queue in the Edgeport. If the Edgeport RX queue is full then +// the Check will be discarded. +// It is up to the device driver to timeout waiting for the +// RX_CHECK_RSP. If a RX_CHECK_RSP is received, the driver is +// sure that all data has been received from the edgeport and // may now purge any internal RX buffers. -// Note tat the sequence numbers may be used to detect lost +// Note tat the sequence numbers may be used to detect lost // CHECK_REQs. // Example for Port 0 @@ -341,7 +342,7 @@ struct int_status_pkt { // // 1ssssPPP P1P1P1P1 [ P2P2P2P2P2 ]... // -// ssss: 00-07 2-byte status. ssss identifies which UART register +// ssss: 00-07 2-byte status. ssss identifies which UART register // has changed value, and the new value is in P1. // Note that the ssss values do not correspond to the // 16554 register numbers given in 16554.H. Instead, @@ -383,14 +384,14 @@ struct int_status_pkt { // returns this in order to report // changes in modem status lines // (CTS, DSR, RI, CD) -// +// // 0x02 // Available for future expansion -// 0x03 // -// 0x04 // -// 0x05 // -// 0x06 // -// 0x07 // +// 0x03 // +// 0x04 // +// 0x05 // +// 0x06 // +// 0x07 // /**************************************************** @@ -400,7 +401,7 @@ struct int_status_pkt { #define IOSP_STATUS_LSR_DATA 0x08 // P1 is new value of LSR register (same as STATUS_LSR) // P2 is errored character read from -// RxFIFO after LSR reported an error. +// RxFIFO after LSR reported an error. #define IOSP_EXT_STATUS 0x09 // P1 is status/response code, param in P2. @@ -408,7 +409,7 @@ struct int_status_pkt { // Response Codes (P1 values) for 3-byte status messages #define IOSP_EXT_STATUS_CHASE_RSP 0 // Reply to CHASE_PORT cmd. P2 is outcome: -#define IOSP_EXT_STATUS_CHASE_PASS 0 // P2 = 0: All Tx data drained successfully +#define IOSP_EXT_STATUS_CHASE_PASS 0 // P2 = 0: All Tx data drained successfully #define IOSP_EXT_STATUS_CHASE_FAIL 1 // P2 = 1: Timed out (stuck due to flow // control from remote device). @@ -446,9 +447,9 @@ struct int_status_pkt { // Macros to parse status messages // -#define IOSP_GET_STATUS_LEN(code) ( (code) < 8 ? 2 : ((code) < 0x0A ? 3 : 4) ) +#define IOSP_GET_STATUS_LEN(code) ((code) < 8 ? 2 : ((code) < 0x0A ? 3 : 4)) -#define IOSP_STATUS_IS_2BYTE(code) ( (code) < 0x08 ) -#define IOSP_STATUS_IS_3BYTE(code) ( ((code) >= 0x08) && ((code) <= 0x0B) ) -#define IOSP_STATUS_IS_4BYTE(code) ( ((code) >= 0x0C) && ((code) <= 0x0D) ) +#define IOSP_STATUS_IS_2BYTE(code) ((code) < 0x08) +#define IOSP_STATUS_IS_3BYTE(code) (((code) >= 0x08) && ((code) <= 0x0B)) +#define IOSP_STATUS_IS_4BYTE(code) (((code) >= 0x0C) && ((code) <= 0x0D)) diff --git a/drivers/usb/serial/io_ti.h b/drivers/usb/serial/io_ti.h index cab84f2256b9..1bd67b24f916 100644 --- a/drivers/usb/serial/io_ti.h +++ b/drivers/usb/serial/io_ti.h @@ -1,4 +1,4 @@ -/***************************************************************************** +/***************************************************************************** * * Copyright (C) 1997-2002 Inside Out Networks, Inc. * @@ -22,10 +22,10 @@ #define DTK_ADDR_SPACE_I2C_TYPE_II 0x82 /* Addr is placed in I2C area */ #define DTK_ADDR_SPACE_I2C_TYPE_III 0x83 /* Addr is placed in I2C area */ -// UART Defines -#define UMPMEM_BASE_UART1 0xFFA0 /* UMP UART1 base address */ -#define UMPMEM_BASE_UART2 0xFFB0 /* UMP UART2 base address */ -#define UMPMEM_OFFS_UART_LSR 0x05 /* UMP UART LSR register offset */ +/* UART Defines */ +#define UMPMEM_BASE_UART1 0xFFA0 /* UMP UART1 base address */ +#define UMPMEM_BASE_UART2 0xFFB0 /* UMP UART2 base address */ +#define UMPMEM_OFFS_UART_LSR 0x05 /* UMP UART LSR register offset */ /* Bits per character */ #define UMP_UART_CHAR5BITS 0x00 @@ -54,7 +54,7 @@ #define UMP_UART_LSR_RX_MASK 0x10 #define UMP_UART_LSR_TX_MASK 0x20 -#define UMP_UART_LSR_DATA_MASK ( LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK ) +#define UMP_UART_LSR_DATA_MASK (LSR_PAR_ERR | LSR_FRM_ERR | LSR_BREAK) /* Port Settings Constants) */ #define UMP_MASK_UART_FLAGS_RTS_FLOW 0x0001 @@ -79,50 +79,57 @@ #define UMP_PORT_DIR_OUT 0x01 #define UMP_PORT_DIR_IN 0x02 -// Address of Port 0 -#define UMPM_UART1_PORT 0x03 - -// Commands -#define UMPC_SET_CONFIG 0x05 -#define UMPC_OPEN_PORT 0x06 -#define UMPC_CLOSE_PORT 0x07 -#define UMPC_START_PORT 0x08 -#define UMPC_STOP_PORT 0x09 -#define UMPC_TEST_PORT 0x0A -#define UMPC_PURGE_PORT 0x0B - -#define UMPC_COMPLETE_READ 0x80 // Force the Firmware to complete the current Read -#define UMPC_HARDWARE_RESET 0x81 // Force UMP back into BOOT Mode -#define UMPC_COPY_DNLD_TO_I2C 0x82 // Copy current download image to type 0xf2 record in 16k I2C - // firmware will change 0xff record to type 2 record when complete +/* Address of Port 0 */ +#define UMPM_UART1_PORT 0x03 + +/* Commands */ +#define UMPC_SET_CONFIG 0x05 +#define UMPC_OPEN_PORT 0x06 +#define UMPC_CLOSE_PORT 0x07 +#define UMPC_START_PORT 0x08 +#define UMPC_STOP_PORT 0x09 +#define UMPC_TEST_PORT 0x0A +#define UMPC_PURGE_PORT 0x0B + +/* Force the Firmware to complete the current Read */ +#define UMPC_COMPLETE_READ 0x80 +/* Force UMP back into BOOT Mode */ +#define UMPC_HARDWARE_RESET 0x81 +/* + * Copy current download image to type 0xf2 record in 16k I2C + * firmware will change 0xff record to type 2 record when complete + */ +#define UMPC_COPY_DNLD_TO_I2C 0x82 - // Special function register commands - // wIndex is register address - // wValue is MSB/LSB mask/data -#define UMPC_WRITE_SFR 0x83 // Write SFR Register +/* + * Special function register commands + * wIndex is register address + * wValue is MSB/LSB mask/data + */ +#define UMPC_WRITE_SFR 0x83 /* Write SFR Register */ - // wIndex is register address -#define UMPC_READ_SFR 0x84 // Read SRF Register +/* wIndex is register address */ +#define UMPC_READ_SFR 0x84 /* Read SRF Register */ - // Set or Clear DTR (wValue bit 0 Set/Clear) wIndex ModuleID (port) +/* Set or Clear DTR (wValue bit 0 Set/Clear) wIndex ModuleID (port) */ #define UMPC_SET_CLR_DTR 0x85 - // Set or Clear RTS (wValue bit 0 Set/Clear) wIndex ModuleID (port) +/* Set or Clear RTS (wValue bit 0 Set/Clear) wIndex ModuleID (port) */ #define UMPC_SET_CLR_RTS 0x86 - // Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) +/* Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */ #define UMPC_SET_CLR_LOOPBACK 0x87 - // Set or Clear BREAK (wValue bit 0 Set/Clear) wIndex ModuleID (port) +/* Set or Clear BREAK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */ #define UMPC_SET_CLR_BREAK 0x88 - // Read MSR wIndex ModuleID (port) +/* Read MSR wIndex ModuleID (port) */ #define UMPC_READ_MSR 0x89 - /* Toolkit commands */ - /* Read-write group */ -#define UMPC_MEMORY_READ 0x92 -#define UMPC_MEMORY_WRITE 0x93 +/* Toolkit commands */ +/* Read-write group */ +#define UMPC_MEMORY_READ 0x92 +#define UMPC_MEMORY_WRITE 0x93 /* * UMP DMA Definitions @@ -130,8 +137,7 @@ #define UMPD_OEDB1_ADDRESS 0xFF08 #define UMPD_OEDB2_ADDRESS 0xFF10 -struct out_endpoint_desc_block -{ +struct out_endpoint_desc_block { __u8 Configuration; __u8 XBufAddr; __u8 XByteCount; @@ -147,8 +153,8 @@ struct out_endpoint_desc_block * TYPE DEFINITIONS * Structures for Firmware commands */ -struct ump_uart_config /* UART settings */ -{ +/* UART settings */ +struct ump_uart_config { __u16 wBaudRate; /* Baud rate */ __u16 wFlags; /* Bitmap mask of flags */ __u8 bDataBits; /* 5..8 - data bits per character */ @@ -165,8 +171,8 @@ struct ump_uart_config /* UART settings */ * TYPE DEFINITIONS * Structures for USB interrupts */ -struct ump_interrupt /* Interrupt packet structure */ -{ +/* Interrupt packet structure */ +struct ump_interrupt { __u8 bICode; /* Interrupt code (interrupt num) */ __u8 bIInfo; /* Interrupt information */ } __attribute__((packed)); diff --git a/drivers/usb/serial/io_usbvend.h b/drivers/usb/serial/io_usbvend.h index 8e1a491e52a9..51f83fbb73bb 100644 --- a/drivers/usb/serial/io_usbvend.h +++ b/drivers/usb/serial/io_usbvend.h @@ -26,7 +26,7 @@ // // Definitions of USB product IDs -// +// #define USB_VENDOR_ID_ION 0x1608 // Our VID #define USB_VENDOR_ID_TI 0x0451 // TI VID @@ -54,7 +54,7 @@ // Product IDs - assigned to match middle digit of serial number (No longer true) #define ION_DEVICE_ID_80251_NETCHIP 0x020 // This bit is set in the PID if this edgeport hardware$ - // is based on the 80251+Netchip. + // is based on the 80251+Netchip. #define ION_DEVICE_ID_GENERATION_1 0x00 // Value for 930 based edgeports #define ION_DEVICE_ID_GENERATION_2 0x01 // Value for 80251+Netchip. @@ -134,7 +134,7 @@ #define ION_DEVICE_ID_TI_EDGEPORT_416 0x0212 // Edgeport/416 #define ION_DEVICE_ID_TI_EDGEPORT_1 0x0215 // Edgeport/1 RS232 #define ION_DEVICE_ID_TI_EDGEPORT_42 0x0217 // Edgeport/42 4 hub 2 RS232 -#define ION_DEVICE_ID_TI_EDGEPORT_22I 0x021A // Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232 +#define ION_DEVICE_ID_TI_EDGEPORT_22I 0x021A // Edgeport/22I is an Edgeport/4 with ports 1&2 RS422 and ports 3&4 RS232 #define ION_DEVICE_ID_TI_EDGEPORT_2C 0x021B // Edgeport/2c RS232 #define ION_DEVICE_ID_TI_EDGEPORT_221C 0x021C // Edgeport/221c is a TI based Edgeport/2 with lucent chip and // 2 external hub ports - Large I2C @@ -142,7 +142,7 @@ // 2 external hub ports - Large I2C #define ION_DEVICE_ID_TI_EDGEPORT_21C 0x021E // Edgeport/21c is a TI based Edgeport/2 with lucent chip -// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C) +// Generation 3 devices -- 3410 based edgport/1 (256 byte I2C) #define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1 0x0240 // Edgeport/1 RS232 #define ION_DEVICE_ID_TI_TI3410_EDGEPORT_1I 0x0241 // Edgeport/1i- RS422 model @@ -176,7 +176,7 @@ // Default to /P function #define ION_DEVICE_ID_PLUS_PWR_HP4CD 0x30C // 5052 Plus Power HubPort/4CD+ (for Dell) -#define ION_DEVICE_ID_PLUS_PWR_HP4C 0x30D // 5052 Plus Power HubPort/4C+ +#define ION_DEVICE_ID_PLUS_PWR_HP4C 0x30D // 5052 Plus Power HubPort/4C+ #define ION_DEVICE_ID_PLUS_PWR_PCI 0x30E // 3410 Plus Power PCI Host Controller 4 port @@ -217,17 +217,17 @@ #define ION_DEVICE_ID_MT4X56USB 0x1403 // OEM device -#define GENERATION_ID_FROM_USB_PRODUCT_ID( ProductId ) \ - ( (__u16) ((ProductId >> 8) & (ION_GENERATION_MASK)) ) +#define GENERATION_ID_FROM_USB_PRODUCT_ID(ProductId) \ + ((__u16) ((ProductId >> 8) & (ION_GENERATION_MASK))) -#define MAKE_USB_PRODUCT_ID( OemId, DeviceId ) \ - ( (__u16) (((OemId) << 10) || (DeviceId)) ) +#define MAKE_USB_PRODUCT_ID(OemId, DeviceId) \ + ((__u16) (((OemId) << 10) || (DeviceId))) -#define DEVICE_ID_FROM_USB_PRODUCT_ID( ProductId ) \ - ( (__u16) ((ProductId) & (EDGEPORT_DEVICE_ID_MASK)) ) +#define DEVICE_ID_FROM_USB_PRODUCT_ID(ProductId) \ + ((__u16) ((ProductId) & (EDGEPORT_DEVICE_ID_MASK))) -#define OEM_ID_FROM_USB_PRODUCT_ID( ProductId ) \ - ( (__u16) (((ProductId) >> 10) & 0x3F) ) +#define OEM_ID_FROM_USB_PRODUCT_ID(ProductId) \ + ((__u16) (((ProductId) >> 10) & 0x3F)) // // Definitions of parameters for download code. Note that these are @@ -237,7 +237,7 @@ // TxCredits value below which driver won't bother sending (to prevent too many small writes). // Send only if above 25% -#define EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(InitialCredit, MaxPacketSize) (max( ((InitialCredit) / 4), (MaxPacketSize) )) +#define EDGE_FW_GET_TX_CREDITS_SEND_THRESHOLD(InitialCredit, MaxPacketSize) (max(((InitialCredit) / 4), (MaxPacketSize))) #define EDGE_FW_BULK_MAX_PACKET_SIZE 64 // Max Packet Size for Bulk In Endpoint (EP1) #define EDGE_FW_BULK_READ_BUFFER_SIZE 1024 // Size to use for Bulk reads @@ -263,7 +263,7 @@ // wValue = 16-bit address // wIndex = unused (though we could put segment 00: or FF: here) // wLength = # bytes to read/write (max 64) -// +// #define USB_REQUEST_ION_RESET_DEVICE 0 // Warm reboot Edgeport, retaining USB address #define USB_REQUEST_ION_GET_EPIC_DESC 1 // Get Edgeport Compatibility Descriptor @@ -278,7 +278,7 @@ #define USB_REQUEST_ION_ENABLE_SUSPEND 9 // Enable/Disable suspend feature // (wValue != 0: Enable; wValue = 0: Disable) -#define USB_REQUEST_ION_SEND_IOSP 10 // Send an IOSP command to the edgeport over the control pipe +#define USB_REQUEST_ION_SEND_IOSP 10 // Send an IOSP command to the edgeport over the control pipe #define USB_REQUEST_ION_RECV_IOSP 11 // Receive an IOSP command from the edgeport over the control pipe @@ -301,8 +301,7 @@ // this is a "real" Edgeport. // -struct edge_compatibility_bits -{ +struct edge_compatibility_bits { // This __u32 defines which Vendor-specific commands/functionality // the device supports on the default EP0 pipe. @@ -334,24 +333,22 @@ struct edge_compatibility_bits __u32 TrueEdgeport : 1; // 0001 Set if device is a 'real' Edgeport // (Used only by driver, NEVER set by an EPiC device) __u32 GenUnused : 31; // Available for future expansion, must be 0 - }; #define EDGE_COMPATIBILITY_MASK0 0x0001 #define EDGE_COMPATIBILITY_MASK1 0x3FFF #define EDGE_COMPATIBILITY_MASK2 0x0001 -struct edge_compatibility_descriptor -{ +struct edge_compatibility_descriptor { __u8 Length; // Descriptor Length (per USB spec) __u8 DescType; // Descriptor Type (per USB spec, =DEVICE type) __u8 EpicVer; // Version of EPiC spec supported - // (Currently must be 1) + // (Currently must be 1) __u8 NumPorts; // Number of serial ports supported __u8 iDownloadFile; // Index of string containing download code filename - // 0=no download, FF=download compiled into driver. - __u8 Unused[ 3 ]; // Available for future expansion, must be 0 - // (Currently must be 0). + // 0=no download, FF=download compiled into driver. + __u8 Unused[3]; // Available for future expansion, must be 0 + // (Currently must be 0). __u8 MajorVersion; // Firmware version: xx. __u8 MinorVersion; // yy. __le16 BuildNumber; // zzzz (LE format) @@ -359,9 +356,7 @@ struct edge_compatibility_descriptor // The following structure contains __u32s, with each bit // specifying whether the EPiC device supports the given // command or functionality. - struct edge_compatibility_bits Supports; - }; // Values for iDownloadFile @@ -391,8 +386,8 @@ struct edge_compatibility_descriptor // Define the max block size that may be read or written // in a read/write RAM/ROM command. -#define MAX_SIZE_REQ_ION_READ_MEM ( (__u16) 64 ) -#define MAX_SIZE_REQ_ION_WRITE_MEM ( (__u16) 64 ) +#define MAX_SIZE_REQ_ION_READ_MEM ((__u16)64) +#define MAX_SIZE_REQ_ION_WRITE_MEM ((__u16)64) // @@ -545,7 +540,7 @@ struct edge_boot_descriptor { __u8 MajorVersion; // C6 Firmware version: xx. __u8 MinorVersion; // C7 yy. __le16 BuildNumber; // C8 zzzz (LE format) - + __u16 EnumRootDescTable; // CA Root of ROM-based descriptor table __u8 NumDescTypes; // CC Number of supported descriptor types @@ -597,41 +592,36 @@ struct edge_boot_descriptor { #define I2C_DESC_TYPE_ION 0 // Not defined by TI -struct ti_i2c_desc -{ +struct ti_i2c_desc { __u8 Type; // Type of descriptor __u16 Size; // Size of data only not including header __u8 CheckSum; // Checksum (8 bit sum of data only) __u8 Data[0]; // Data starts here -}__attribute__((packed)); +} __attribute__((packed)); // for 5152 devices only (type 2 record) // for 3410 the version is stored in the WATCHPORT_FIRMWARE_VERSION descriptor -struct ti_i2c_firmware_rec -{ +struct ti_i2c_firmware_rec { __u8 Ver_Major; // Firmware Major version number __u8 Ver_Minor; // Firmware Minor version number __u8 Data[0]; // Download starts here -}__attribute__((packed)); +} __attribute__((packed)); -struct watchport_firmware_version -{ +struct watchport_firmware_version { // Added 2 bytes for version number __u8 Version_Major; // Download Version (for Watchport) __u8 Version_Minor; -}__attribute__((packed)); +} __attribute__((packed)); // Structure of header of download image in fw_down.h -struct ti_i2c_image_header -{ +struct ti_i2c_image_header { __le16 Length; __u8 CheckSum; -}__attribute__((packed)); +} __attribute__((packed)); -struct ti_basic_descriptor -{ +struct ti_basic_descriptor { __u8 Power; // Self powered // bit 7: 1 - power switching supported // 0 - power switching not supported @@ -663,9 +653,9 @@ struct ti_basic_descriptor #define TI_I2C_SIZE_MASK 0x1f // 5 bits #define TI_GET_I2C_SIZE(x) ((((x) & TI_I2C_SIZE_MASK)+1)*256) -#define TI_MAX_I2C_SIZE ( 16 * 1024 ) +#define TI_MAX_I2C_SIZE (16 * 1024) -#define TI_MANUF_VERSION_0 0 +#define TI_MANUF_VERSION_0 0 // IonConig2 flags #define TI_CONFIG2_RS232 0x01 @@ -676,8 +666,7 @@ struct ti_basic_descriptor #define TI_CONFIG2_WATCHPORT 0x10 -struct edge_ti_manuf_descriptor -{ +struct edge_ti_manuf_descriptor { __u8 IonConfig; // Config byte for ION manufacturing use __u8 IonConfig2; // Expansion __u8 Version; // Version @@ -688,7 +677,7 @@ struct edge_ti_manuf_descriptor __u8 HubConfig2; // Used to configure the Hub __u8 TotalPorts; // Total Number of Com Ports for the entire device (All UMPs) __u8 Reserved; // Reserved -}__attribute__((packed)); +} __attribute__((packed)); #endif // if !defined(_USBVEND_H)