From: Grazvydas Ignotas Date: Sat, 16 Jun 2012 19:31:49 +0000 (+0300) Subject: wl1251: fix filtering support X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a2d2bb8675fe9dc127d802b6be6517a0932e65b7;p=openwrt%2Fstaging%2Fblogic.git wl1251: fix filtering support This driver has a hack in cmd.c which effectively disables all filtering. This seems to be triggering a firmware bug where it stops reporting any rx packets after random time on some routers, which is eliminated (or at least appears much more rarely) when filtering is on. I have found that only BSSID filter needs to be disabled for association to work, so disable only that instead of all filtering. Signed-off-by: Grazvydas Ignotas Signed-off-by: John W. Linville --- diff --git a/drivers/net/wireless/ti/wl1251/cmd.c b/drivers/net/wireless/ti/wl1251/cmd.c index d14d69d733a0..6822b845efc1 100644 --- a/drivers/net/wireless/ti/wl1251/cmd.c +++ b/drivers/net/wireless/ti/wl1251/cmd.c @@ -277,15 +277,6 @@ int wl1251_cmd_join(struct wl1251 *wl, u8 bss_type, u8 channel, join->rx_config_options = wl->rx_config; join->rx_filter_options = wl->rx_filter; - /* - * FIXME: disable temporarily all filters because after commit - * 9cef8737 "mac80211: fix managed mode BSSID handling" broke - * association. The filter logic needs to be implemented properly - * and once that is done, this hack can be removed. - */ - join->rx_config_options = 0; - join->rx_filter_options = WL1251_DEFAULT_RX_FILTER; - join->basic_rate_set = RATE_MASK_1MBPS | RATE_MASK_2MBPS | RATE_MASK_5_5MBPS | RATE_MASK_11MBPS; diff --git a/drivers/net/wireless/ti/wl1251/main.c b/drivers/net/wireless/ti/wl1251/main.c index ff60a7a341be..6094e3f9e2f8 100644 --- a/drivers/net/wireless/ti/wl1251/main.c +++ b/drivers/net/wireless/ti/wl1251/main.c @@ -334,6 +334,12 @@ static int wl1251_join(struct wl1251 *wl, u8 bss_type, u8 channel, if (ret < 0) goto out; + /* + * Join command applies filters, and if we are not associated, + * BSSID filter must be disabled for association to work. + */ + if (is_zero_ether_addr(wl->bssid)) + wl->rx_config &= ~CFG_BSSID_FILTER_EN; ret = wl1251_cmd_join(wl, bss_type, channel, beacon_interval, dtim_period);