From: Igor Opaniuk <igor.opaniuk@toradex.com>
Date: Wed, 29 May 2019 10:00:43 +0000 (+0300)
Subject: apalis-tk1: use UUID for rootfs
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a2cd5240d6ffcaabc7259f852277c0fb96470b27;p=project%2Fbcm63xx%2Fu-boot.git

apalis-tk1: use UUID for rootfs

1. Replace usage of "/dev/mmcblk*p*" with a proper UUID of rootfs
partition. This fixes the issue, when MMC controllers are probed in
a different order in U-boot and Linux kernel.
2. Fix legacy USB command (both sdboot and usbboot can be used now).

Acked-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Igor Opaniuk <igor.opaniuk@toradex.com>
---

diff --git a/include/configs/apalis-tk1.h b/include/configs/apalis-tk1.h
index 9c8c8979f0..490ca64b10 100644
--- a/include/configs/apalis-tk1.h
+++ b/include/configs/apalis-tk1.h
@@ -48,15 +48,22 @@
 				"tegra124-apalis-eval.dtb fat 0 1 mmcpart 0"
 
 #define EMMC_BOOTCMD \
-	"emmcargs=ip=off root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait\0" \
-	"emmcboot=run setup; setenv bootargs ${defargs} ${emmcargs} " \
-		"${setupargs} ${vidargs}; echo Booting from internal eMMC " \
-		"chip...; run emmcdtbload; load mmc 0:1 ${kernel_addr_r} " \
+	"set_emmcargs=setenv emmcargs ip=off root=PARTUUID=${uuid} " \
+		"ro rootfstype=ext4 rootwait\0" \
+	"emmcboot=run setup; run emmcfinduuid; run set_emmcargs; " \
+		"setenv bootargs ${defargs} ${emmcargs} " \
+		"${setupargs} ${vidargs}; echo Booting from internal eMMC; " \
+		"run emmcdtbload; " \
+		"load mmc ${emmcdev}:${emmcbootpart} ${kernel_addr_r} " \
 		"${boot_file} && run fdt_fixup && " \
 		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
-	"emmcdtbload=setenv dtbparam; load mmc 0:1 ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb && " \
-		"setenv dtbparam ${fdt_addr_r}\0"
+	"emmcbootpart=1\0" \
+	"emmcdev=0\0" \
+	"emmcdtbload=setenv dtbparam; load mmc ${emmcdev}:${emmcbootpart} " \
+		"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb && " \
+		"setenv dtbparam ${fdt_addr_r}\0" \
+	"emmcfinduuid=part uuid mmc ${mmcdev}:${emmcrootpart} uuid\0" \
+	"emmcrootpart=2\0"
 
 #define NFS_BOOTCMD \
 	"nfsargs=ip=:::::eth0:on root=/dev/nfs rw\0" \
@@ -69,26 +76,38 @@
 		"&& setenv dtbparam ${fdt_addr_r}\0"
 
 #define SD_BOOTCMD \
-	"sdargs=ip=off root=/dev/mmcblk1p2 rw rootfstype=ext4 rootwait\0" \
-	"sdboot=run setup; setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
+	"set_sdargs=setenv sdargs ip=off root=PARTUUID=${uuid} ro " \
+	"rootfstype=ext4 rootwait\0" \
+	"sdboot=run setup; run sdfinduuid; run set_sdargs; " \
+		"setenv bootargs ${defargs} ${sdargs} ${setupargs} " \
 		"${vidargs}; echo Booting from SD card in 8bit slot...; " \
-		"run sddtbload; load mmc 1:1 ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
+		"run sddtbload; load mmc ${sddev}:${sdbootpart} " \
+		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
 		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
-	"sddtbload=setenv dtbparam; load mmc 1:1 ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb " \
-		"&& setenv dtbparam ${fdt_addr_r}\0"
+	"sdbootpart=1\0" \
+	"sddev=1\0" \
+	"sddtbload=setenv dtbparam; load mmc ${sddev}:${sdbootpart} " \
+		"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \
+		"&& setenv dtbparam ${fdt_addr_r}\0" \
+	"sdfinduuid=part uuid mmc ${sddev}:${sdrootpart} uuid\0" \
+	"sdrootpart=2\0"
 
 #define USB_BOOTCMD \
-	"usbargs=ip=off root=/dev/sda2 rw rootfstype=ext4 rootwait\0" \
-	"usbboot=run setup; setenv bootargs ${defargs} ${setupargs} " \
+	"set_usbargs=setenv usbargs ip=off root=PARTUUID=${uuid} ro " \
+		"rootfstype=ext4 rootwait\0" \
+	"usbboot=run setup; usb start; run usbfinduuid; run set_usbargs; " \
+		"setenv bootargs ${defargs} ${setupargs} " \
 		"${usbargs} ${vidargs}; echo Booting from USB stick...; " \
-		"usb start && run usbdtbload; load usb 0:1 ${kernel_addr_r} " \
-		"${boot_file} && run fdt_fixup && " \
+		"run usbdtbload; load usb ${usbdev}:${usbbootpart} " \
+		"${kernel_addr_r} ${boot_file} && run fdt_fixup && " \
 		"bootm ${kernel_addr_r} - ${dtbparam}\0" \
-	"usbdtbload=setenv dtbparam; load usb 0:1 ${fdt_addr_r} " \
-		"${soc}-apalis-${fdt_board}.dtb " \
-		"&& setenv dtbparam ${fdt_addr_r}\0"
+	"usbbootpart=1\0" \
+	"usbdev=0\0" \
+	"usbdtbload=setenv dtbparam; load usb ${usbdev}:${usbbootpart} " \
+		"${fdt_addr_r} ${soc}-apalis-${fdt_board}.dtb " \
+		"&& setenv dtbparam ${fdt_addr_r}\0" \
+	"usbfinduuid=part uuid usb ${usbdev}:${usbrootpart} uuid\0" \
+	"usbrootpart=2\0"
 
 #define BOARD_EXTRA_ENV_SETTINGS \
 	"boot_file=uImage\0" \
@@ -101,6 +120,7 @@
 	"fdt_fixup=;\0" \
 	NFS_BOOTCMD \
 	SD_BOOTCMD \
+	USB_BOOTCMD \
 	"setethupdate=if env exists ethaddr; then; else setenv ethaddr " \
 		"00:14:2d:00:00:00; fi; pci enum && tftpboot ${loadaddr} " \
 		"flash_eth.img && source ${loadaddr}\0" \