From: Pawel Dembicki Date: Mon, 24 Aug 2020 12:29:32 +0000 (+0200) Subject: layerscape: Change to combined rootfs on sd images X-Git-Tag: v21.02.0-rc1~1283 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a254279a6c30;p=openwrt%2Fstaging%2Fpepe2k.git layerscape: Change to combined rootfs on sd images At this moment layerscape images are ext4 only. It causes problem with save changes durring sysupgrade and make "firstboot" and failsafe mode useless. This patch changes sd-card images to squashfs + f2fs combined images. To make place, for saving config, kernel space ar now ext4 partition with fit kernel. This method of image generation is similar to rest of OpenWrt sd-card targets. Reviewed-by: Yangbo Lu Signed-off-by: Pawel Dembicki [reword README, reword DEVICE_COMPAT_MESSAGE, keep original indent] Signed-off-by: Adrian Schmutzler --- diff --git a/package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt index 31178df690..1fcd769dc9 100644 --- a/package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt +++ b/package/boot/uboot-layerscape/files/fsl_ls1012a-frwy-sdboot-uEnv.txt @@ -1,8 +1,8 @@ fdtaddr=0x8f000000 loadaddr=0x81000000 -fdt_high=0xffffffffffffffff +fdt_high=0x8fffffff initrd_high=0xffffffffffffffff -sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr -bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 +sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr +bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 bootcmd=echo starting openwrt ...;pfe stop;run sd_boot bootdelay=3 diff --git a/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt index 7772daa100..ed8661bc6e 100644 --- a/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt +++ b/package/boot/uboot-layerscape/files/fsl_ls1021a-iot-sdboot-uEnv.txt @@ -1,8 +1,8 @@ fdtaddr=0x8f000000 loadaddr=0x81000000 -fdt_high=0xffffffff +fdt_high=0x8fffffff initrd_high=0xffffffff -sd_boot=mmc read ${fdtaddr} 7800 800;mmc read ${loadaddr} 8000 8000;bootm ${loadaddr} - ${fdtaddr} -bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 +sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr +bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 bootcmd=echo starting openwrt ...;run sd_boot bootdelay=3 diff --git a/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt index da286a24ae..ed8661bc6e 100644 --- a/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt +++ b/package/boot/uboot-layerscape/files/fsl_ls1021a-twr-sdboot-uEnv.txt @@ -1,8 +1,8 @@ fdtaddr=0x8f000000 loadaddr=0x81000000 -fdt_high=0xffffffff +fdt_high=0x8fffffff initrd_high=0xffffffff -sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr -bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 cma=64M@0x0-0xb0000000 +sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr +bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 bootcmd=echo starting openwrt ...;run sd_boot bootdelay=3 diff --git a/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt index c1596b506a..6034033876 100644 --- a/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt +++ b/package/boot/uboot-layerscape/files/fsl_ls1043a-rdb-sdboot-uEnv.txt @@ -1,9 +1,9 @@ fdtaddr=0x8f000000 loadaddr=0x81000000 -fdt_high=0xffffffffffffffff +fdt_high=0x8fffffff initrd_high=0xffffffffffffffff hwconfig=fsl_ddr:bank_intlv=auto -sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr -bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 +sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr +bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 bootcmd=echo starting openwrt ...;run sd_boot bootdelay=3 diff --git a/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt index c1596b506a..6034033876 100644 --- a/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt +++ b/package/boot/uboot-layerscape/files/fsl_ls1046a-rdb-sdboot-uEnv.txt @@ -1,9 +1,9 @@ fdtaddr=0x8f000000 loadaddr=0x81000000 -fdt_high=0xffffffffffffffff +fdt_high=0x8fffffff initrd_high=0xffffffffffffffff hwconfig=fsl_ddr:bank_intlv=auto -sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr -bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 +sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr +bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 bootcmd=echo starting openwrt ...;run sd_boot bootdelay=3 diff --git a/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt b/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt index 2d27f7eb05..b25e9c8ee7 100644 --- a/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt +++ b/package/boot/uboot-layerscape/files/fsl_ls1088a-rdb-sdboot-uEnv.txt @@ -4,7 +4,7 @@ fdt_high=0xa0000000 initrd_high=0xffffffffffffffff hwconfig=fsl_ddr:bank_intlv=auto mc_init=mmc read 80000000 5000 1800;mmc read 80300000 7000 800;fsl_mc start mc 80000000 80300000;mmc read 80400000 6800 800;fsl_mc apply dpl 80400000 -sd_boot=mmc read $fdtaddr 7800 800;mmc read $loadaddr 8000 8000;bootm $loadaddr - $fdtaddr -bootargs=root=/dev/mmcblk0p1 rw rootwait rootfstype=ext4 noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 +sd_boot=ext4load mmc 0:1 $loadaddr fitImage;bootm $loadaddr +bootargs=root=/dev/mmcblk0p2 rw rootwait rootfstype=squashfs,f2fs noinitrd earlycon=uart8250,mmio,0x21c0500 console=ttyS0,115200 bootcmd=echo starting openwrt ...;run mc_init;run sd_boot bootdelay=3 diff --git a/target/linux/layerscape/Makefile b/target/linux/layerscape/Makefile index c5b27ad0c7..9030747823 100644 --- a/target/linux/layerscape/Makefile +++ b/target/linux/layerscape/Makefile @@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk BOARD:=layerscape BOARDNAME:=NXP Layerscape KERNEL_PATCHVER:=5.4 -FEATURES:=squashfs nand usb pcie gpio fpu ubifs ext4 +FEATURES:=squashfs nand usb pcie gpio fpu ubifs ext4 rootfs-part boot-part SUBTARGETS:=armv8_64b armv7 define Target/Description @@ -19,6 +19,6 @@ endef include $(INCLUDE_DIR)/target.mk DEFAULT_PACKAGES += kmod-usb3 kmod-usb-dwc3 kmod-usb-storage \ - partx-utils + mkf2fs e2fsprogs partx-utils $(eval $(call BuildTarget)) diff --git a/target/linux/layerscape/README b/target/linux/layerscape/README index 8cbf05bd15..4bade4a9c0 100644 --- a/target/linux/layerscape/README +++ b/target/linux/layerscape/README @@ -39,13 +39,14 @@ $ ./scripts/feeds install -a * Final firmware/image Path: bin/targets/layerscape// Firmware for flash: openwrt-layerscape----firmware.bin - Image for SD card: openwrt-layerscape----sdcard.img + Image for SD card: openwrt-layerscape----sdcard.img.gz + Sysupgrade images: openwrt-layerscape----sysupgrade.bin 3. Program NOR/QSPI flash or SD card ------------------------------------ -The firmware.bin or sdcard.img is an all-in-one image including all things for -OpenWrt staring up. (except LS1012AFRWY. Refer to 3.3.) +The firmware.bin or sdcard.img (after extract from gz) is an all-in-one image including all +things for OpenWrt staring up. (except LS1012AFRWY. Refer to 3.3.) If you want to install all things into flash, please use firmware.bin. If you want to install all things into SD card, please use sdcard.img. @@ -53,7 +54,7 @@ If you want to install all things into SD card, please use sdcard.img. --------------------------------- sdcard.img could be programmed to SD card in either u-boot environment or linux environment. After programming, configure the board to boot -from SD card. +from SD card. (sdcard.img images are gz-iped to save space. Please extract them first.) * u-boot environment diff --git a/target/linux/layerscape/armv7/config-5.4 b/target/linux/layerscape/armv7/config-5.4 index 56a6dfd913..1b969afd85 100644 --- a/target/linux/layerscape/armv7/config-5.4 +++ b/target/linux/layerscape/armv7/config-5.4 @@ -242,6 +242,9 @@ CONFIG_EVENT_TRACING=y CONFIG_EXT4_FS=y CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y +CONFIG_F2FS_FS=y +CONFIG_F2FS_FS_XATTR=y +CONFIG_F2FS_STAT_FS=y CONFIG_FAILOVER=y CONFIG_FAT_FS=y # CONFIG_FEC is not set diff --git a/target/linux/layerscape/armv8_64b/config-5.4 b/target/linux/layerscape/armv8_64b/config-5.4 index 311f2eee84..6da7ff01a5 100644 --- a/target/linux/layerscape/armv8_64b/config-5.4 +++ b/target/linux/layerscape/armv8_64b/config-5.4 @@ -266,6 +266,9 @@ CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y CONFIG_EXTCON=y CONFIG_EXTCON_USB_GPIO=y +CONFIG_F2FS_FS=y +CONFIG_F2FS_FS_XATTR=y +CONFIG_F2FS_STAT_FS=y CONFIG_FAILOVER=y CONFIG_FANOTIFY=y CONFIG_FAT_FS=y diff --git a/target/linux/layerscape/base-files/etc/uci-defaults/05_fix-compat-version b/target/linux/layerscape/base-files/etc/uci-defaults/05_fix-compat-version index 923f4ac273..6cd137af9a 100644 --- a/target/linux/layerscape/base-files/etc/uci-defaults/05_fix-compat-version +++ b/target/linux/layerscape/base-files/etc/uci-defaults/05_fix-compat-version @@ -5,11 +5,17 @@ . /lib/functions.sh case "$(board_name)" in + fsl,ls1012a-frwy-sdboot | \ fsl,ls1012a-rdb | \ + fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr | \ + fsl,ls1021a-twr-sdboot | \ fsl,ls1043a-rdb | \ + fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-rdb | \ + fsl,ls1046a-rdb-sdboot | \ fsl,ls1088a-rdb | \ + fsl,ls1088a-rdb-sdboot | \ fsl,ls2088a-rdb) uci set system.@system[0].compat_version="2.0" uci commit system diff --git a/target/linux/layerscape/base-files/lib/preinit/79_move_config b/target/linux/layerscape/base-files/lib/preinit/79_move_config new file mode 100644 index 0000000000..d691fa99f1 --- /dev/null +++ b/target/linux/layerscape/base-files/lib/preinit/79_move_config @@ -0,0 +1,26 @@ +. /lib/functions.sh +. /lib/upgrade/common.sh + +BOOTPART=/dev/mmcblk0p1 + +move_config() { + local board=$(board_name) + + case "$board" in + fsl,ls1012a-frwy-sdboot | \ + fsl,ls1021a-iot-sdboot | \ + fsl,ls1021a-twr-sdboot | \ + fsl,ls1043a-rdb-sdboot | \ + fsl,ls1046a-rdb-sdboot | \ + fsl,ls1088a-rdb-sdboot) + if [ -b $BOOTPART ]; then + mkdir -p /boot + mount -t ext4 -o rw,noatime $BOOTPART /boot 2>&1 + [ -f "/boot/$BACKUP_FILE" ] && mv -f "/boot/$BACKUP_FILE" / + umount /boot + fi + ;; + esac +} + +boot_hook_add preinit_mount_root move_config diff --git a/target/linux/layerscape/base-files/lib/upgrade/platform.sh b/target/linux/layerscape/base-files/lib/upgrade/platform.sh index de01ac46de..a8d83de7ea 100644 --- a/target/linux/layerscape/base-files/lib/upgrade/platform.sh +++ b/target/linux/layerscape/base-files/lib/upgrade/platform.sh @@ -8,88 +8,28 @@ RAMFS_COPY_DATA="/etc/fw_env.config /var/lock/fw_printenv.lock" REQUIRE_IMAGE_METADATA=1 -platform_check_image_sdboot() { - local diskdev partdev diff - - export_bootdevice && export_partdevice diskdev 0 || { - echo "Unable to determine upgrade device" - return 1 - } - - # get partitions table from boot device - get_partitions "/dev/$diskdev" bootdisk - - # get partitions table from sysupgrade.bin - dd if="$1" of=/tmp/image.bs bs=512b count=1 > /dev/null 2>&1 - sync - get_partitions /tmp/image.bs image - - # compare tables - diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)" - - rm -f /tmp/image.bs /tmp/partmap.bootdisk /tmp/partmap.image - - if [ -n "$diff" ]; then - echo "Partition layout has changed. Full image will be written." - ask_bool 0 "Abort" && exit 1 - return 0 - fi -} platform_do_upgrade_sdboot() { - local diskdev partdev diff + local diskdev partdev parttype=ext4 + local tar_file="$1" + local board_dir=$(tar tf $tar_file | grep -m 1 '^sysupgrade-.*/$') + board_dir=${board_dir%/} export_bootdevice && export_partdevice diskdev 0 || { echo "Unable to determine upgrade device" return 1 } - if [ "$UPGRADE_OPT_SAVE_PARTITIONS" = "1" ]; then - # get partitions table from boot device - get_partitions "/dev/$diskdev" bootdisk - - # get partitions table from sysupgrade.bin - dd if="$1" of=/tmp/image.bs bs=512b count=1 > /dev/null 2>&1 - sync - get_partitions /tmp/image.bs image - - # compare tables - diff="$(grep -F -x -v -f /tmp/partmap.bootdisk /tmp/partmap.image)" - else - diff=1 - fi - - if [ -n "$diff" ]; then - dd if="$1" of="/dev/$diskdev" bs=1024 count=4 > /dev/null 2>&1 - echo "Writing image to /dev/$diskdev..." - dd if="$1" of="/dev/$diskdev" bs=1024 skip=15360 seek=15360 > /dev/null 2>&1 - sync - - # Separate removal and addtion is necessary; otherwise, partition 1 - # will be missing if it overlaps with the old partition 2 - partx -d - "/dev/$diskdev" - partx -a - "/dev/$diskdev" - - return 0 + if export_partdevice partdev 1; then + mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt 2>&1 + echo "Writing kernel..." + tar xf $tar_file ${board_dir}/kernel -O > /mnt/fitImage + umount /mnt fi - # write dtb - echo "Writing dtb to /dev/$diskdev..." - dd if="$1" of="/dev/$diskdev" bs=1024 skip=15360 seek=15360 count=1024 > /dev/null 2>&1 - # write kernel image - echo "Writing kernel to /dev/$diskdev..." - dd if="$1" of="/dev/$diskdev" bs=1024 skip=16384 seek=16384 count=16384 > /dev/null 2>&1 - sync - - # iterate over each partition from the image and write it to the boot disk - while read part start size; do - if export_partdevice partdev $part; then - echo "Writing image to /dev/$partdev..." - dd if="$1" of="/dev/$partdev" bs=512 skip="$start" count="$size" > /dev/null 2>&1 - sync - else - echo "Unable to find partition $part device, skipped." - fi - done < /tmp/partmap.image + echo "Erasing rootfs..." + dd if=/dev/zero of=/dev/mmcblk0p2 bs=1M > /dev/null 2>&1 + echo "Writing rootfs..." + tar xf $tar_file ${board_dir}/root -O | dd of=/dev/mmcblk0p2 bs=512k > /dev/null 2>&1 } platform_do_upgrade_traverse_nandubi() { @@ -119,6 +59,7 @@ platform_copy_config_sdboot() { if export_partdevice partdev 1; then mount -t $parttype -o rw,noatime "/dev/$partdev" /mnt 2>&1 + echo "Saving config backup..." cp -af "$UPGRADE_BACKUP" "/mnt/$BACKUP_FILE" umount /mnt fi @@ -128,6 +69,7 @@ platform_copy_config() { case "$board" in fsl,ls1012a-frwy-sdboot | \ + fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr-sdboot | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-rdb-sdboot | \ @@ -146,22 +88,20 @@ platform_check_image() { return $? ;; fsl,ls1012a-frdm | \ + fsl,ls1012a-frwy-sdboot | \ fsl,ls1012a-rdb | \ + fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr | \ + fsl,ls1021a-twr-sdboot | \ fsl,ls1043a-rdb | \ + fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-rdb | \ + fsl,ls1046a-rdb-sdboot | \ fsl,ls1088a-rdb | \ + fsl,ls1088a-rdb-sdboot | \ fsl,ls2088a-rdb) return 0 ;; - fsl,ls1012a-frwy-sdboot | \ - fsl,ls1021a-twr-sdboot | \ - fsl,ls1043a-rdb-sdboot | \ - fsl,ls1046a-rdb-sdboot | \ - fsl,ls1088a-rdb-sdboot) - platform_check_image_sdboot "$1" - return 0 - ;; *) echo "Sysupgrade is not currently supported on $board" ;; @@ -192,6 +132,7 @@ platform_do_upgrade() { default_do_upgrade "$1" ;; fsl,ls1012a-frwy-sdboot | \ + fsl,ls1021a-iot-sdboot | \ fsl,ls1021a-twr-sdboot | \ fsl,ls1043a-rdb-sdboot | \ fsl,ls1046a-rdb-sdboot | \ diff --git a/target/linux/layerscape/image/Makefile b/target/linux/layerscape/image/Makefile index 08864b1316..bfc4af4ca4 100644 --- a/target/linux/layerscape/image/Makefile +++ b/target/linux/layerscape/image/Makefile @@ -7,13 +7,22 @@ include $(TOPDIR)/rules.mk include $(INCLUDE_DIR)/image.mk +LS_SD_KERNELPART_SIZE = 40 +LS_SD_KERNELPART_OFFSET = 16 LS_SD_ROOTFSPART_OFFSET = 64 LS_SD_IMAGE_SIZE = $(shell echo $$((($(LS_SD_ROOTFSPART_OFFSET) + \ - $(CONFIG_TARGET_ROOTFS_PARTSIZE)) * 1024 * 1024))) + $(CONFIG_TARGET_ROOTFS_PARTSIZE))))) # The limitation of flash sysupgrade.bin is 1MB dtb + 16MB kernel + 32MB rootfs LS_SYSUPGRADE_IMAGE_SIZE = 49m +define Image/Prepare + # Build .dtb for all boards we may run on + $(foreach dts,$(DEVICE_DTS_LIST), + $(call Image/BuildDTB,$(DTS_DIR)/$(dts).dts,$(DTS_DIR)/$(dts).dtb) + ) +endef + define Build/ls-clean rm -f $@ endef @@ -23,12 +32,21 @@ define Build/ls-append endef define Build/ls-append-dtb - $(call Image/BuildDTB,$(DTS_DIR)/$(1).dts,$(DTS_DIR)/$(1).dtb) dd if=$(DTS_DIR)/$(1).dtb >> $@ endef +define Build/ls-append-kernel + mkdir -p $@.tmp && \ + cp $(IMAGE_KERNEL) $@.tmp/fitImage && \ + make_ext4fs -J -L kernel -l "$(LS_SD_KERNELPART_SIZE)M" "$@.kernel.part" "$@.tmp" && \ + dd if=$@.kernel.part >> $@ && \ + rm -rf $@.tmp && \ + rm -f $@.kernel.part +endef + define Build/ls-append-sdhead ./gen_sdcard_head_img.sh $(STAGING_DIR_IMAGE)/$(1)-sdcard-head.img \ + $(LS_SD_KERNELPART_OFFSET) $(LS_SD_KERNELPART_SIZE) \ $(LS_SD_ROOTFSPART_OFFSET) $(CONFIG_TARGET_ROOTFS_PARTSIZE) dd if=$(STAGING_DIR_IMAGE)/$(1)-sdcard-head.img >> $@ endef @@ -53,6 +71,12 @@ define Device/fix-sysupgrade After that, You can use "sysupgrade -F". endef +define Device/rework-sdcard-images + DEVICE_COMPAT_VERSION := 2.0 + DEVICE_COMPAT_MESSAGE := SD-card images were changed to squashfs + ext4 overlay combined images. \ + It is required to flash the entire sd-card again and manually copy config. +endef + include $(SUBTARGET).mk $(eval $(call BuildImage)) diff --git a/target/linux/layerscape/image/armv7.mk b/target/linux/layerscape/image/armv7.mk index 23bd3e8d82..46e5cf9395 100644 --- a/target/linux/layerscape/image/armv7.mk +++ b/target/linux/layerscape/image/armv7.mk @@ -40,50 +40,40 @@ endef TARGET_DEVICES += fsl_ls1021a-twr define Device/fsl_ls1021a-twr-sdboot + $(Device/rework-sdcard-images) DEVICE_VENDOR := NXP DEVICE_MODEL := TWR-LS1021A DEVICE_VARIANT := SD Card Boot DEVICE_DTS := ls1021a-twr - FILESYSTEMS := ext4 - IMAGES := sdcard.img sysupgrade.bin - IMAGE/sdcard.img := \ + KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb + IMAGES := sdcard.img.gz sysupgrade.bin + IMAGE/sdcard.img.gz := \ ls-clean | \ ls-append-sdhead $(1) | pad-to 4K | \ ls-append $(1)-uboot.bin | pad-to 3M | \ - ls-append $(1)-uboot-env.bin | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) - IMAGE/sysupgrade.bin := \ - ls-clean | \ - ls-append-sdhead $(1) | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata + ls-append $(1)-uboot-env.bin | pad-to 16M | \ + ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ + append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += fsl_ls1021a-twr-sdboot define Device/fsl_ls1021a-iot-sdboot + $(Device/rework-sdcard-images) DEVICE_VENDOR := NXP DEVICE_MODEL := LS1021A-IoT DEVICE_VARIANT := SD Card Boot DEVICE_DTS := ls1021a-iot - FILESYSTEMS := ext4 SUPPORTED_DEVICES := - IMAGES := sdcard.img sysupgrade.bin - IMAGE/sdcard.img := \ + KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb + IMAGES := sdcard.img.gz sysupgrade.bin + IMAGE/sdcard.img.gz := \ ls-clean | \ ls-append-sdhead $(1) | pad-to 4K | \ ls-append $(1)-uboot.bin | pad-to 1M | \ - ls-append $(1)-uboot-env.bin | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) - IMAGE/sysupgrade.bin := \ - ls-clean | \ - ls-append-sdhead $(1) | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata + ls-append $(1)-uboot-env.bin | pad-to 16M | \ + ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ + append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += fsl_ls1021a-iot-sdboot diff --git a/target/linux/layerscape/image/armv8_64b.mk b/target/linux/layerscape/image/armv8_64b.mk index 35bab47124..ff480c287b 100644 --- a/target/linux/layerscape/image/armv8_64b.mk +++ b/target/linux/layerscape/image/armv8_64b.mk @@ -67,6 +67,7 @@ endef TARGET_DEVICES += fsl_ls1012a-rdb define Device/fsl_ls1012a-frwy-sdboot + $(Device/rework-sdcard-images) DEVICE_VENDOR := NXP DEVICE_MODEL := FRWY-LS1012A DEVICE_PACKAGES += \ @@ -74,8 +75,8 @@ define Device/fsl_ls1012a-frwy-sdboot tfa-ls1012a-frwy-sdboot \ kmod-ppfe DEVICE_DTS := freescale/fsl-ls1012a-frwy - FILESYSTEMS := ext4 - IMAGES := firmware.bin sdcard.img sysupgrade.bin + KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb + IMAGES := firmware.bin sdcard.img.gz sysupgrade.bin IMAGE/firmware.bin := \ ls-clean | \ ls-append $(1)-bl2.pbl | pad-to 128K | \ @@ -83,18 +84,12 @@ define Device/fsl_ls1012a-frwy-sdboot ls-append $(1)-fip.bin | pad-to 1856K | \ ls-append $(1)-uboot-env.bin | pad-to 2048K | \ check-size 2097153 - IMAGE/sdcard.img := \ - ls-clean | \ - ls-append-sdhead $(1) | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) - IMAGE/sysupgrade.bin := \ + IMAGE/sdcard.img.gz := \ ls-clean | \ - ls-append-sdhead $(1) | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata + ls-append-sdhead $(1) | pad-to 16M | \ + ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ + append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += fsl_ls1012a-frwy-sdboot @@ -124,6 +119,7 @@ endef TARGET_DEVICES += fsl_ls1043a-rdb define Device/fsl_ls1043a-rdb-sdboot + $(Device/rework-sdcard-images) DEVICE_VENDOR := NXP DEVICE_MODEL := LS1043A-RDB DEVICE_VARIANT := SD Card Boot @@ -135,24 +131,18 @@ define Device/fsl_ls1043a-rdb-sdboot kmod-hwmon-ina2xx \ kmod-hwmon-lm90 DEVICE_DTS := freescale/fsl-ls1043a-rdb-sdk - FILESYSTEMS := ext4 - IMAGES := sdcard.img sysupgrade.bin - IMAGE/sdcard.img := \ + KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb + IMAGES := sdcard.img.gz sysupgrade.bin + IMAGE/sdcard.img.gz := \ ls-clean | \ ls-append-sdhead $(1) | pad-to 4K | \ ls-append $(1)-bl2.pbl | pad-to 1M | \ ls-append $(1)-fip.bin | pad-to 5M | \ ls-append $(1)-uboot-env.bin | pad-to 9M | \ - ls-append fsl_ls1043a-rdb-fman.bin | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) - IMAGE/sysupgrade.bin := \ - ls-clean | \ - ls-append-sdhead $(1) | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata + ls-append fsl_ls1043a-rdb-fman.bin | pad-to 16M | \ + ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ + append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += fsl_ls1043a-rdb-sdboot @@ -182,6 +172,7 @@ endef TARGET_DEVICES += fsl_ls1046a-rdb define Device/fsl_ls1046a-rdb-sdboot + $(Device/rework-sdcard-images) DEVICE_VENDOR := NXP DEVICE_MODEL := LS1046A-RDB DEVICE_VARIANT := SD Card Boot @@ -193,24 +184,18 @@ define Device/fsl_ls1046a-rdb-sdboot kmod-hwmon-ina2xx \ kmod-hwmon-lm90 DEVICE_DTS := freescale/fsl-ls1046a-rdb-sdk - FILESYSTEMS := ext4 - IMAGES := sdcard.img sysupgrade.bin - IMAGE/sdcard.img := \ + KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb + IMAGES := sdcard.img.gz sysupgrade.bin + IMAGE/sdcard.img.gz := \ ls-clean | \ ls-append-sdhead $(1) | pad-to 4K | \ ls-append $(1)-bl2.pbl | pad-to 1M | \ ls-append $(1)-fip.bin | pad-to 5M | \ ls-append $(1)-uboot-env.bin | pad-to 9M | \ - ls-append fsl_ls1046a-rdb-fman.bin | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) - IMAGE/sysupgrade.bin := \ - ls-clean | \ - ls-append-sdhead $(1) | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata + ls-append fsl_ls1046a-rdb-fman.bin | pad-to 16M | \ + ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ + append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += fsl_ls1046a-rdb-sdboot @@ -242,6 +227,7 @@ endef TARGET_DEVICES += fsl_ls1088a-rdb define Device/fsl_ls1088a-rdb-sdboot + $(Device/rework-sdcard-images) DEVICE_VENDOR := NXP DEVICE_MODEL := LS1088A-RDB DEVICE_VARIANT := SD Card Boot @@ -254,9 +240,9 @@ define Device/fsl_ls1088a-rdb-sdboot kmod-hwmon-ina2xx \ kmod-hwmon-lm90 DEVICE_DTS := freescale/fsl-ls1088a-rdb - FILESYSTEMS := ext4 - IMAGES := sdcard.img sysupgrade.bin - IMAGE/sdcard.img := \ + KERNEL := kernel-bin | gzip | fit gzip $$(DTS_DIR)/$$(DEVICE_DTS).dtb + IMAGES := sdcard.img.gz sysupgrade.bin + IMAGE/sdcard.img.gz := \ ls-clean | \ ls-append-sdhead $(1) | pad-to 4K | \ ls-append $(1)-bl2.pbl | pad-to 1M | \ @@ -264,16 +250,10 @@ define Device/fsl_ls1088a-rdb-sdboot ls-append $(1)-uboot-env.bin | pad-to 10M | \ ls-append fsl_ls1088a-rdb-mc.itb | pad-to 13M | \ ls-append fsl_ls1088a-rdb-dpl.dtb | pad-to 14M | \ - ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) - IMAGE/sysupgrade.bin := \ - ls-clean | \ - ls-append-sdhead $(1) | pad-to 15M | \ - ls-append-dtb $$(DEVICE_DTS) | pad-to 16M | \ - append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ - append-rootfs | check-size $(LS_SD_IMAGE_SIZE) | append-metadata + ls-append fsl_ls1088a-rdb-dpc.dtb | pad-to 16M | \ + ls-append-kernel | pad-to $(LS_SD_ROOTFSPART_OFFSET)M | \ + append-rootfs | pad-to $(LS_SD_IMAGE_SIZE)M | gzip + IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata endef TARGET_DEVICES += fsl_ls1088a-rdb-sdboot diff --git a/target/linux/layerscape/image/gen_sdcard_head_img.sh b/target/linux/layerscape/image/gen_sdcard_head_img.sh index 08ab4497d5..d3a8fd2d12 100755 --- a/target/linux/layerscape/image/gen_sdcard_head_img.sh +++ b/target/linux/layerscape/image/gen_sdcard_head_img.sh @@ -7,16 +7,18 @@ # set -x -[ $# -eq 3 ] || { - echo "SYNTAX: $0 " +[ $# -eq 5 ] || { + echo "SYNTAX: $0 " exit 1 } OUTPUT="$1" -ROOTFSOFFSET="$(($2 * 1024))" -ROOTFSSIZE="$3" +KERNELOFFSET="$(($2 * 1024))" +KERNELSIZE="$3" +ROOTFSOFFSET="$(($4 * 1024))" +ROOTFSSIZE="$5" head=4 -sect=16 +sect=63 -set $(ptgen -o $OUTPUT -h $head -s $sect -l $ROOTFSOFFSET -t 83 -p ${ROOTFSSIZE}M) +set $(ptgen -o $OUTPUT -h $head -s $sect -t 83 -p ${KERNELSIZE}M@${KERNELOFFSET} -p ${ROOTFSSIZE}M@${ROOTFSOFFSET})