From: Haavard Skinnemoen Date: Mon, 19 May 2008 09:36:28 +0000 (+0200) Subject: avr32: Rework SDRAM initialization code X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a23e277c4a3a2bbc42d237aae29da3a8971e757f;p=project%2Fbcm63xx%2Fu-boot.git avr32: Rework SDRAM initialization code This cleans up the SDRAM initialization and related code a bit, and allows faster booting. * Add definitions for EBI and internal SRAM to asm/arch/memory-map.h * Remove memory test from sdram_init() and make caller responsible for verifying the SDRAM and determining its size. * Remove base_address member from struct sdram_config (was sdram_info) * Add data_bits member to struct sdram_config and kill CFG_SDRAM_16BIT * Add support for a common STK1000 hack: 16MB SDRAM instead of 8. Signed-off-by: Haavard Skinnemoen --- diff --git a/board/atmel/atngw100/atngw100.c b/board/atmel/atngw100/atngw100.c index 3ff6f0feb2..c649855d63 100644 --- a/board/atmel/atngw100/atngw100.c +++ b/board/atmel/atngw100/atngw100.c @@ -29,8 +29,8 @@ DECLARE_GLOBAL_DATA_PTR; -static const struct sdram_info sdram = { - .phys_addr = CFG_SDRAM_BASE, +static const struct sdram_config sdram_config = { + .data_bits = SDRAM_DATA_16BIT, .row_bits = 13, .col_bits = 9, .bank_bits = 2, @@ -66,7 +66,22 @@ int board_early_init_f(void) long int initdram(int board_type) { - return sdram_init(&sdram); + unsigned long expected_size; + unsigned long actual_size; + void *sdram_base; + + sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE); + + expected_size = sdram_init(sdram_base, &sdram_config); + actual_size = get_ram_size(sdram_base, expected_size); + + unmap_physmem(sdram_base, EBI_SDRAM_SIZE); + + if (expected_size != actual_size) + printf("Warning: Only %u of %u MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + + return actual_size; } void board_init_info(void) diff --git a/board/atmel/atstk1000/atstk1000.c b/board/atmel/atstk1000/atstk1000.c index 52fec65c19..33bdba6f5d 100644 --- a/board/atmel/atstk1000/atstk1000.c +++ b/board/atmel/atstk1000/atstk1000.c @@ -29,10 +29,10 @@ DECLARE_GLOBAL_DATA_PTR; -#ifdef CONFIG_ATSTK1006 -/* Dual MT48LC16M16A2-7E on daughterboard */ -static const struct sdram_info sdram = { - .phys_addr = CFG_SDRAM_BASE, +static const struct sdram_config sdram_config = { +#if defined(CONFIG_ATSTK1006) + /* Dual MT48LC16M16A2-7E (64 MB) on daughterboard */ + .data_bits = SDRAM_DATA_32BIT, .row_bits = 13, .col_bits = 9, .bank_bits = 2, @@ -45,12 +45,19 @@ static const struct sdram_info sdram = { .txsr = 7, /* 7.81 us */ .refresh_period = (781 * (SDRAMC_BUS_HZ / 1000)) / 100000, -}; #else -/* MT48LC2M32B2-5 on motherboard */ -static const struct sdram_info sdram = { - .phys_addr = CFG_SDRAM_BASE, + /* MT48LC2M32B2P-5 (8 MB) on motherboard */ +#ifdef CONFIG_ATSTK1004 + .data_bits = SDRAM_DATA_16BIT, +#else + .data_bits = SDRAM_DATA_32BIT, +#endif +#ifdef CONFIG_ATSTK1000_16MB_SDRAM + /* MT48LC4M32B2P-6 (16 MB) on mod'ed motherboard */ + .row_bits = 12, +#else .row_bits = 11, +#endif .col_bits = 8, .bank_bits = 2, .cas = 3, @@ -62,8 +69,8 @@ static const struct sdram_info sdram = { .txsr = 5, /* 15.6 us */ .refresh_period = (156 * (SDRAMC_BUS_HZ / 1000)) / 10000, -}; #endif +}; int board_early_init_f(void) { @@ -85,7 +92,22 @@ int board_early_init_f(void) long int initdram(int board_type) { - return sdram_init(&sdram); + unsigned long expected_size; + unsigned long actual_size; + void *sdram_base; + + sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE); + + expected_size = sdram_init(sdram_base, &sdram_config); + actual_size = get_ram_size(sdram_base, expected_size); + + unmap_physmem(sdram_base, EBI_SDRAM_SIZE); + + if (expected_size != actual_size) + printf("Warning: Only %u of %u MiB SDRAM is working\n", + actual_size >> 20, expected_size >> 20); + + return actual_size; } void board_init_info(void) diff --git a/cpu/at32ap/hsdramc.c b/cpu/at32ap/hsdramc.c index 1fcfe75d74..992612b462 100644 --- a/cpu/at32ap/hsdramc.c +++ b/cpu/at32ap/hsdramc.c @@ -30,39 +30,32 @@ #include "hsdramc1.h" -unsigned long sdram_init(const struct sdram_info *info) +unsigned long sdram_init(void *sdram_base, const struct sdram_config *config) { - unsigned long *sdram = (unsigned long *)uncached(info->phys_addr); unsigned long sdram_size; - unsigned long tmp; - unsigned long bus_hz; + uint32_t cfgreg; unsigned int i; - if (!info->refresh_period) - panic("ERROR: SDRAM refresh period == 0. " - "Please update the board code\n"); - - tmp = (HSDRAMC1_BF(NC, info->col_bits - 8) - | HSDRAMC1_BF(NR, info->row_bits - 11) - | HSDRAMC1_BF(NB, info->bank_bits - 1) - | HSDRAMC1_BF(CAS, info->cas) - | HSDRAMC1_BF(TWR, info->twr) - | HSDRAMC1_BF(TRC, info->trc) - | HSDRAMC1_BF(TRP, info->trp) - | HSDRAMC1_BF(TRCD, info->trcd) - | HSDRAMC1_BF(TRAS, info->tras) - | HSDRAMC1_BF(TXSR, info->txsr)); - -#ifdef CFG_SDRAM_16BIT - tmp |= HSDRAMC1_BIT(DBW); - sdram_size = 1 << (info->row_bits + info->col_bits - + info->bank_bits + 1); -#else - sdram_size = 1 << (info->row_bits + info->col_bits - + info->bank_bits + 2); -#endif - - hsdramc1_writel(CR, tmp); + cfgreg = (HSDRAMC1_BF(NC, config->col_bits - 8) + | HSDRAMC1_BF(NR, config->row_bits - 11) + | HSDRAMC1_BF(NB, config->bank_bits - 1) + | HSDRAMC1_BF(CAS, config->cas) + | HSDRAMC1_BF(TWR, config->twr) + | HSDRAMC1_BF(TRC, config->trc) + | HSDRAMC1_BF(TRP, config->trp) + | HSDRAMC1_BF(TRCD, config->trcd) + | HSDRAMC1_BF(TRAS, config->tras) + | HSDRAMC1_BF(TXSR, config->txsr)); + + if (config->data_bits == SDRAM_DATA_16BIT) + cfgreg |= HSDRAMC1_BIT(DBW); + + hsdramc1_writel(CR, cfgreg); + + /* Send a NOP to turn on the clock (necessary on some chips) */ + hsdramc1_writel(MR, HSDRAMC1_MODE_NOP); + hsdramc1_readl(MR); + writel(0, sdram_base); /* * Initialization sequence for SDRAM, from the data sheet: @@ -77,7 +70,7 @@ unsigned long sdram_init(const struct sdram_info *info) */ hsdramc1_writel(MR, HSDRAMC1_MODE_BANKS_PRECHARGE); hsdramc1_readl(MR); - writel(0, sdram); + writel(0, sdram_base); /* * 3. Eight auto-refresh (CBR) cycles are provided @@ -85,58 +78,41 @@ unsigned long sdram_init(const struct sdram_info *info) hsdramc1_writel(MR, HSDRAMC1_MODE_AUTO_REFRESH); hsdramc1_readl(MR); for (i = 0; i < 8; i++) - writel(0, sdram); + writel(0, sdram_base); /* * 4. A mode register set (MRS) cycle is issued to program * SDRAM parameters, in particular CAS latency and burst * length. * - * CAS from info struct, burst length 1, serial burst type + * The address will be chosen by the SDRAMC automatically; we + * just have to make sure BA[1:0] are set to 0. */ hsdramc1_writel(MR, HSDRAMC1_MODE_LOAD_MODE); hsdramc1_readl(MR); - writel(0, sdram + (info->cas << 4)); + writel(0, sdram_base); /* - * 5. A Normal Mode command is provided, 3 clocks after tMRD - * is met. - * - * From the timing diagram, it looks like tMRD is 3 - * cycles...try a dummy read from the peripheral bus. + * 5. The application must go into Normal Mode, setting Mode + * to 0 in the Mode Register and performing a write access + * at any location in the SDRAM. */ - hsdramc1_readl(MR); hsdramc1_writel(MR, HSDRAMC1_MODE_NORMAL); hsdramc1_readl(MR); - writel(0, sdram); + writel(0, sdram_base); /* * 6. Write refresh rate into SDRAMC refresh timer count * register (refresh rate = timing between refresh cycles). - * - * 15.6 us is a typical value for a burst of length one */ - bus_hz = get_sdram_clk_rate(); - hsdramc1_writel(TR, info->refresh_period); - - printf("SDRAM: %u MB at address 0x%08lx\n", - sdram_size >> 20, info->phys_addr); - - printf("Testing SDRAM..."); - for (i = 0; i < sdram_size / 4; i++) - sdram[i] = i; - - for (i = 0; i < sdram_size / 4; i++) { - tmp = sdram[i]; - if (tmp != i) { - printf("FAILED at address 0x%08lx\n", - info->phys_addr + i * 4); - printf("SDRAM: read 0x%lx, expected 0x%lx\n", tmp, i); - return 0; - } - } - - puts("OK\n"); + hsdramc1_writel(TR, config->refresh_period); + + if (config->data_bits == SDRAM_DATA_16BIT) + sdram_size = 1 << (config->row_bits + config->col_bits + + config->bank_bits + 1); + else + sdram_size = 1 << (config->row_bits + config->col_bits + + config->bank_bits + 2); return sdram_size; } diff --git a/include/asm-avr32/arch-at32ap700x/memory-map.h b/include/asm-avr32/arch-at32ap700x/memory-map.h index 5513e88e7b..6592c039fa 100644 --- a/include/asm-avr32/arch-at32ap700x/memory-map.h +++ b/include/asm-avr32/arch-at32ap700x/memory-map.h @@ -22,6 +22,26 @@ #ifndef __AT32AP7000_MEMORY_MAP_H__ #define __AT32AP7000_MEMORY_MAP_H__ +/* Internal and external memories */ +#define EBI_SRAM_CS0_BASE 0x00000000 +#define EBI_SRAM_CS0_SIZE 0x04000000 +#define EBI_SRAM_CS4_BASE 0x04000000 +#define EBI_SRAM_CS4_SIZE 0x04000000 +#define EBI_SRAM_CS2_BASE 0x08000000 +#define EBI_SRAM_CS2_SIZE 0x04000000 +#define EBI_SRAM_CS3_BASE 0x0c000000 +#define EBI_SRAM_CS3_SIZE 0x04000000 +#define EBI_SRAM_CS1_BASE 0x10000000 +#define EBI_SRAM_CS1_SIZE 0x10000000 +#define EBI_SRAM_CS5_BASE 0x20000000 +#define EBI_SRAM_CS5_SIZE 0x04000000 + +#define EBI_SDRAM_BASE EBI_SRAM_CS1_BASE +#define EBI_SDRAM_SIZE EBI_SRAM_CS1_SIZE + +#define INTERNAL_SRAM_BASE 0x24000000 +#define INTERNAL_SRAM_SIZE 0x00008000 + /* Devices on the High Speed Bus (HSB) */ #define LCDC_BASE 0xFF000000 #define DMAC_BASE 0xFF200000 diff --git a/include/asm-avr32/sdram.h b/include/asm-avr32/sdram.h index 833af6e6ad..7bdefc1fd2 100644 --- a/include/asm-avr32/sdram.h +++ b/include/asm-avr32/sdram.h @@ -22,15 +22,32 @@ #ifndef __ASM_AVR32_SDRAM_H #define __ASM_AVR32_SDRAM_H -struct sdram_info { - unsigned long phys_addr; - unsigned int row_bits, col_bits, bank_bits; - unsigned int cas, twr, trc, trp, trcd, tras, txsr; +struct sdram_config { + /* Number of data bits. */ + enum { + SDRAM_DATA_16BIT, + SDRAM_DATA_32BIT, + } data_bits; + + /* Number of address bits */ + uint8_t row_bits, col_bits, bank_bits; + + /* SDRAM timings in cycles */ + uint8_t cas, twr, trc, trp, trcd, tras, txsr; /* SDRAM refresh period in cycles */ unsigned long refresh_period; }; -extern unsigned long sdram_init(const struct sdram_info *info); +/* + * Attempt to initialize the SDRAM controller using the specified + * parameters. Return the expected size of the memory area based on + * the number of address and data bits. + * + * The caller should verify that the configuration is correct by + * running a memory test, e.g. get_ram_size(). + */ +extern unsigned long sdram_init(void *sdram_base, + const struct sdram_config *config); #endif /* __ASM_AVR32_SDRAM_H */ diff --git a/include/configs/atngw100.h b/include/configs/atngw100.h index 313298a5c7..3fc9975637 100644 --- a/include/configs/atngw100.h +++ b/include/configs/atngw100.h @@ -24,6 +24,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include + #define CONFIG_AVR32 1 #define CONFIG_AT32AP 1 #define CONFIG_AT32AP7000 1 @@ -140,11 +142,9 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_INTRAM_BASE 0x24000000 -#define CFG_INTRAM_SIZE 0x8000 - -#define CFG_SDRAM_BASE 0x10000000 -#define CFG_SDRAM_16BIT 1 +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 65536 @@ -153,17 +153,10 @@ #define CFG_INIT_SP_ADDR (CFG_INTRAM_BASE + CFG_INTRAM_SIZE) #define CFG_MALLOC_LEN (256*1024) -#define CFG_MALLOC_END \ - ({ \ - DECLARE_GLOBAL_DATA_PTR; \ - CFG_SDRAM_BASE + gd->sdram_size; \ - }) -#define CFG_MALLOC_START (CFG_MALLOC_END - CFG_MALLOC_LEN) - #define CFG_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ @@ -173,7 +166,7 @@ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_START EBI_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x1f00000) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/include/configs/atstk1002.h b/include/configs/atstk1002.h index f652b28710..ba18eb63c7 100644 --- a/include/configs/atstk1002.h +++ b/include/configs/atstk1002.h @@ -24,6 +24,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include + #define CONFIG_AVR32 1 #define CONFIG_AT32AP 1 #define CONFIG_AT32AP7000 1 @@ -170,10 +172,9 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_INTRAM_BASE 0x24000000 -#define CFG_INTRAM_SIZE 0x8000 - -#define CFG_SDRAM_BASE 0x10000000 +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 65536 @@ -185,7 +186,7 @@ #define CFG_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ @@ -195,7 +196,7 @@ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_START EBI_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/include/configs/atstk1003.h b/include/configs/atstk1003.h index 2d981ccbad..a528ddfb0e 100644 --- a/include/configs/atstk1003.h +++ b/include/configs/atstk1003.h @@ -24,6 +24,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include + #define CONFIG_AVR32 1 #define CONFIG_AT32AP 1 #define CONFIG_AT32AP7001 1 @@ -153,10 +155,9 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_INTRAM_BASE 0x24000000 -#define CFG_INTRAM_SIZE 0x8000 - -#define CFG_SDRAM_BASE 0x10000000 +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 65536 @@ -167,7 +168,7 @@ #define CFG_MALLOC_LEN (256*1024) /* Allow 4MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ @@ -177,7 +178,7 @@ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_START EBI_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/include/configs/atstk1004.h b/include/configs/atstk1004.h index 235c1cc9df..fc9585e84d 100644 --- a/include/configs/atstk1004.h +++ b/include/configs/atstk1004.h @@ -24,6 +24,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include + #define CONFIG_AVR32 1 #define CONFIG_AT32AP 1 #define CONFIG_AT32AP7002 1 @@ -153,11 +155,9 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_INTRAM_BASE 0x24000000 -#define CFG_INTRAM_SIZE 0x8000 - -#define CFG_SDRAM_BASE 0x10000000 -#define CFG_SDRAM_16BIT 1 +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 65536 @@ -168,7 +168,7 @@ #define CFG_MALLOC_LEN (256*1024) /* Allow 2MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00200000) +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00200000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ @@ -178,7 +178,7 @@ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_START EBI_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x700000) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 } diff --git a/include/configs/atstk1006.h b/include/configs/atstk1006.h index c606d5dcc2..9fd49a53a3 100644 --- a/include/configs/atstk1006.h +++ b/include/configs/atstk1006.h @@ -24,6 +24,8 @@ #ifndef __CONFIG_H #define __CONFIG_H +#include + #define CONFIG_AVR32 1 #define CONFIG_AT32AP 1 #define CONFIG_AT32AP7000 1 @@ -170,10 +172,9 @@ #define CFG_MONITOR_BASE CFG_FLASH_BASE -#define CFG_INTRAM_BASE 0x24000000 -#define CFG_INTRAM_SIZE 0x8000 - -#define CFG_SDRAM_BASE 0x10000000 +#define CFG_INTRAM_BASE INTERNAL_SRAM_BASE +#define CFG_INTRAM_SIZE INTERNAL_SRAM_SIZE +#define CFG_SDRAM_BASE EBI_SDRAM_BASE #define CFG_ENV_IS_IN_FLASH 1 #define CFG_ENV_SIZE 65536 @@ -185,7 +186,7 @@ #define CFG_DMA_ALLOC_LEN (16384) /* Allow 4MB for the kernel run-time image */ -#define CFG_LOAD_ADDR (CFG_SDRAM_BASE + 0x00400000) +#define CFG_LOAD_ADDR (EBI_SDRAM_BASE + 0x00400000) #define CFG_BOOTPARAMS_LEN (16 * 1024) /* Other configuration settings that shouldn't have to change all that often */ @@ -195,7 +196,7 @@ #define CFG_PBSIZE (CFG_CBSIZE + sizeof(CFG_PROMPT) + 16) #define CFG_LONGHELP 1 -#define CFG_MEMTEST_START CFG_SDRAM_BASE +#define CFG_MEMTEST_START EBI_SDRAM_BASE #define CFG_MEMTEST_END (CFG_MEMTEST_START + 0x3f00000) #define CFG_BAUDRATE_TABLE { 115200, 38400, 19200, 9600, 2400 }