From: David Schleef Date: Thu, 19 Feb 2009 18:08:53 +0000 (-0800) Subject: Staging: comedi: add dt2814 driver X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a211ea977a4127a88fe0a5c4846e33d0e8b2309f;p=openwrt%2Fstaging%2Fblogic.git Staging: comedi: add dt2814 driver Driver for DataTranslation DT2814 From: David Schleef Cc: Ian Abbott Cc: Frank Mori Hess Signed-off-by: Greg Kroah-Hartman --- diff --git a/drivers/staging/comedi/drivers/dt2814.c b/drivers/staging/comedi/drivers/dt2814.c new file mode 100644 index 000000000000..bf432877ab26 --- /dev/null +++ b/drivers/staging/comedi/drivers/dt2814.c @@ -0,0 +1,381 @@ +/* + comedi/drivers/dt2814.c + Hardware driver for Data Translation DT2814 + + COMEDI - Linux Control and Measurement Device Interface + Copyright (C) 1998 David A. Schleef + + This program is free software; you can redistribute it and/or modify + it under the terms of the GNU General Public License as published by + the Free Software Foundation; either version 2 of the License, or + (at your option) any later version. + + This program is distributed in the hope that it will be useful, + but WITHOUT ANY WARRANTY; without even the implied warranty of + MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + GNU General Public License for more details. + + You should have received a copy of the GNU General Public License + along with this program; if not, write to the Free Software + Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + +*/ +/* +Driver: dt2814 +Description: Data Translation DT2814 +Author: ds +Status: complete +Devices: [Data Translation] DT2814 (dt2814) + +Configuration options: + [0] - I/O port base address + [1] - IRQ + +This card has 16 analog inputs multiplexed onto a 12 bit ADC. There +is a minimally useful onboard clock. The base frequency for the +clock is selected by jumpers, and the clock divider can be selected +via programmed I/O. Unfortunately, the clock divider can only be +a power of 10, from 1 to 10^7, of which only 3 or 4 are useful. In +addition, the clock does not seem to be very accurate. +*/ + +#include "../comedidev.h" + +#include +#include + +#define DT2814_SIZE 2 + +#define DT2814_CSR 0 +#define DT2814_DATA 1 + +/* + * flags + */ + +#define DT2814_FINISH 0x80 +#define DT2814_ERR 0x40 +#define DT2814_BUSY 0x20 +#define DT2814_ENB 0x10 +#define DT2814_CHANMASK 0x0f + +static int dt2814_attach(comedi_device * dev, comedi_devconfig * it); +static int dt2814_detach(comedi_device * dev); +static comedi_driver driver_dt2814 = { + driver_name:"dt2814", + module:THIS_MODULE, + attach:dt2814_attach, + detach:dt2814_detach, +}; + +COMEDI_INITCLEANUP(driver_dt2814); + +static irqreturn_t dt2814_interrupt(int irq, void *dev PT_REGS_ARG); + +typedef struct { + int ntrig; + int curadchan; +} dt2814_private; +#define devpriv ((dt2814_private *)dev->private) + +#define DT2814_TIMEOUT 10 +#define DT2814_MAX_SPEED 100000 /* Arbitrary 10 khz limit */ + +static int dt2814_ai_insn_read(comedi_device * dev, comedi_subdevice * s, + comedi_insn * insn, lsampl_t * data) +{ + int n, i, hi, lo; + int chan; + int status = 0; + + for (n = 0; n < insn->n; n++) { + chan = CR_CHAN(insn->chanspec); + + outb(chan, dev->iobase + DT2814_CSR); + for (i = 0; i < DT2814_TIMEOUT; i++) { + status = inb(dev->iobase + DT2814_CSR); + printk("dt2814: status: %02x\n", status); + comedi_udelay(10); + if (status & DT2814_FINISH) + break; + } + if (i >= DT2814_TIMEOUT) { + printk("dt2814: status: %02x\n", status); + return -ETIMEDOUT; + } + + hi = inb(dev->iobase + DT2814_DATA); + lo = inb(dev->iobase + DT2814_DATA); + + data[n] = (hi << 4) | (lo >> 4); + } + + return n; +} + +static int dt2814_ns_to_timer(unsigned int *ns, unsigned int flags) +{ + int i; + unsigned int f; + + /* XXX ignores flags */ + + f = 10000; /* ns */ + for (i = 0; i < 8; i++) { + if ((2 * (*ns)) < (f * 11)) + break; + f *= 10; + } + + *ns = f; + + return i; +} + +static int dt2814_ai_cmdtest(comedi_device * dev, comedi_subdevice * s, + comedi_cmd * cmd) +{ + int err = 0; + int tmp; + + /* step 1: make sure trigger sources are trivially valid */ + + tmp = cmd->start_src; + cmd->start_src &= TRIG_NOW; + if (!cmd->start_src || tmp != cmd->start_src) + err++; + + tmp = cmd->scan_begin_src; + cmd->scan_begin_src &= TRIG_TIMER; + if (!cmd->scan_begin_src || tmp != cmd->scan_begin_src) + err++; + + tmp = cmd->convert_src; + cmd->convert_src &= TRIG_NOW; + if (!cmd->convert_src || tmp != cmd->convert_src) + err++; + + tmp = cmd->scan_end_src; + cmd->scan_end_src &= TRIG_COUNT; + if (!cmd->scan_end_src || tmp != cmd->scan_end_src) + err++; + + tmp = cmd->stop_src; + cmd->stop_src &= TRIG_COUNT | TRIG_NONE; + if (!cmd->stop_src || tmp != cmd->stop_src) + err++; + + if (err) + return 1; + + /* step 2: make sure trigger sources are unique and mutually compatible */ + + /* note that mutual compatiblity is not an issue here */ + if (cmd->stop_src != TRIG_TIMER && cmd->stop_src != TRIG_EXT) + err++; + + if (err) + return 2; + + /* step 3: make sure arguments are trivially compatible */ + + if (cmd->start_arg != 0) { + cmd->start_arg = 0; + err++; + } + if (cmd->scan_begin_arg > 1000000000) { + cmd->scan_begin_arg = 1000000000; + err++; + } + if (cmd->scan_begin_arg < DT2814_MAX_SPEED) { + cmd->scan_begin_arg = DT2814_MAX_SPEED; + err++; + } + if (cmd->scan_end_arg != cmd->chanlist_len) { + cmd->scan_end_arg = cmd->chanlist_len; + err++; + } + if (cmd->stop_src == TRIG_COUNT) { + if (cmd->stop_arg < 2) { + cmd->stop_arg = 2; + err++; + } + } else { + /* TRIG_NONE */ + if (cmd->stop_arg != 0) { + cmd->stop_arg = 0; + err++; + } + } + + if (err) + return 3; + + /* step 4: fix up any arguments */ + + tmp = cmd->scan_begin_arg; + dt2814_ns_to_timer(&cmd->scan_begin_arg, cmd->flags & TRIG_ROUND_MASK); + if (tmp != cmd->scan_begin_arg) + err++; + + if (err) + return 4; + + return 0; +} + +static int dt2814_ai_cmd(comedi_device * dev, comedi_subdevice * s) +{ + comedi_cmd *cmd = &s->async->cmd; + int chan; + int trigvar; + + trigvar = + dt2814_ns_to_timer(&cmd->scan_begin_arg, + cmd->flags & TRIG_ROUND_MASK); + + chan = CR_CHAN(cmd->chanlist[0]); + + devpriv->ntrig = cmd->stop_arg; + outb(chan | DT2814_ENB | (trigvar << 5), dev->iobase + DT2814_CSR); + + return 0; + +} + +static int dt2814_attach(comedi_device * dev, comedi_devconfig * it) +{ + int i, irq; + int ret; + comedi_subdevice *s; + unsigned long iobase; + + iobase = it->options[0]; + printk("comedi%d: dt2814: 0x%04lx ", dev->minor, iobase); + if (!request_region(iobase, DT2814_SIZE, "dt2814")) { + printk("I/O port conflict\n"); + return -EIO; + } + dev->iobase = iobase; + dev->board_name = "dt2814"; + + outb(0, dev->iobase + DT2814_CSR); + comedi_udelay(100); + if (inb(dev->iobase + DT2814_CSR) & DT2814_ERR) { + printk("reset error (fatal)\n"); + return -EIO; + } + i = inb(dev->iobase + DT2814_DATA); + i = inb(dev->iobase + DT2814_DATA); + + irq = it->options[1]; +#if 0 + if (irq < 0) { + save_flags(flags); + sti(); + irqs = probe_irq_on(); + + outb(0, dev->iobase + DT2814_CSR); + + comedi_udelay(100); + + irq = probe_irq_off(irqs); + restore_flags(flags); + if (inb(dev->iobase + DT2814_CSR) & DT2814_ERR) { + printk("error probing irq (bad) \n"); + } + + i = inb(dev->iobase + DT2814_DATA); + i = inb(dev->iobase + DT2814_DATA); + } +#endif + dev->irq = 0; + if (irq > 0) { + if (comedi_request_irq(irq, dt2814_interrupt, 0, "dt2814", dev)) { + printk("(irq %d unavailable)\n", irq); + } else { + printk("( irq = %d )\n", irq); + dev->irq = irq; + } + } else if (irq == 0) { + printk("(no irq)\n"); + } else { +#if 0 + printk("(probe returned multiple irqs--bad)\n"); +#else + printk("(irq probe not implemented)\n"); +#endif + } + + if ((ret = alloc_subdevices(dev, 1)) < 0) + return ret; + if ((ret = alloc_private(dev, sizeof(dt2814_private))) < 0) + return ret; + + s = dev->subdevices + 0; + dev->read_subdev = s; + s->type = COMEDI_SUBD_AI; + s->subdev_flags = SDF_READABLE | SDF_GROUND | SDF_CMD_READ; + s->n_chan = 16; /* XXX */ + s->len_chanlist = 1; + s->insn_read = dt2814_ai_insn_read; + s->do_cmd = dt2814_ai_cmd; + s->do_cmdtest = dt2814_ai_cmdtest; + s->maxdata = 0xfff; + s->range_table = &range_unknown; /* XXX */ + + return 0; +} + +static int dt2814_detach(comedi_device * dev) +{ + printk("comedi%d: dt2814: remove\n", dev->minor); + + if (dev->irq) { + comedi_free_irq(dev->irq, dev); + } + if (dev->iobase) { + release_region(dev->iobase, DT2814_SIZE); + } + + return 0; +} + +static irqreturn_t dt2814_interrupt(int irq, void *d PT_REGS_ARG) +{ + int lo, hi; + comedi_device *dev = d; + comedi_subdevice *s; + int data; + + if (!dev->attached) { + comedi_error(dev, "spurious interrupt"); + return IRQ_HANDLED; + } + + s = dev->subdevices + 0; + + hi = inb(dev->iobase + DT2814_DATA); + lo = inb(dev->iobase + DT2814_DATA); + + data = (hi << 4) | (lo >> 4); + + if (!(--devpriv->ntrig)) { + int i; + + outb(0, dev->iobase + DT2814_CSR); + /* note: turning off timed mode triggers another + sample. */ + + for (i = 0; i < DT2814_TIMEOUT; i++) { + if (inb(dev->iobase + DT2814_CSR) & DT2814_FINISH) + break; + } + inb(dev->iobase + DT2814_DATA); + inb(dev->iobase + DT2814_DATA); + + s->async->events |= COMEDI_CB_EOA; + } + comedi_event(dev, s); + return IRQ_HANDLED; +}