From: Hauke Mehrtens Date: Mon, 4 Feb 2013 22:40:57 +0000 (+0000) Subject: Add Failsafe support for Linksys E3000V1 / WRT610NV2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a1e3c0ca46dabc9ba5a904d0bf5726c251ffece5;p=openwrt%2Fstaging%2Frobimarko.git Add Failsafe support for Linksys E3000V1 / WRT610NV2 Adds specification of the correct cpu_port for Linksys E3000V1 and WRT610NV2 in /lib/preinit/05_init_interfaces_brcm. The list of devices will need to be expanded. Is there a way to determine the correct cpu_port to use in a generic sense; for instance, if "/proc/switch/eth0/port/8" exists, or if "/sys/class/net/eth0/device/driver/module/drivers/bcma:bgmac" exists? Could a similar method be used in "/etc/init.d/netconfig"? Signed-off-by: Nathan Hintz SVN-Revision: 35491 --- diff --git a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm index fd2a93526f..1275b03207 100644 --- a/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm +++ b/target/linux/brcm47xx/base-files/lib/preinit/05_init_interfaces_brcm @@ -14,6 +14,7 @@ set_preinit_iface() { # hardware specific overrides case "$(cat /proc/diag/model)" in "Linksys WAP54G V1") ifname=eth1;; + "Linksys E3000 V1"|"Linksys WRT610N V2") cpu_port="8u*";; "ASUS WL-HDD") ifname=eth1;; "ASUS WL-300g") ifname=eth1;; "ASUS (unknown, BCM4702)") ifname=eth1;;