From: Gabor Juhos Date: Sat, 7 Jan 2012 19:36:35 +0000 (+0000) Subject: ar71xx: add initial support for the TL-WR2543N/ND board X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a1dcbc66a639d0f16e8cafb837099f156e018741;p=openwrt%2Fstaging%2Fstintel.git ar71xx: add initial support for the TL-WR2543N/ND board The WLAN LEDs are not working yet. SVN-Revision: 29680 --- diff --git a/target/linux/ar71xx/base-files/etc/diag.sh b/target/linux/ar71xx/base-files/etc/diag.sh index dcac49de5b..76f263b64b 100755 --- a/target/linux/ar71xx/base-files/etc/diag.sh +++ b/target/linux/ar71xx/base-files/etc/diag.sh @@ -113,6 +113,9 @@ get_status_led() { tl-wr703n) status_led="tp-link:blue:system" ;; + tl-wr2543n) + status_led="tp-link:green:wps" + ;; unifi) status_led="ubnt:green:dome" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/leds b/target/linux/ar71xx/base-files/etc/uci-defaults/leds index 4d04dd7abe..6fe10877d2 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/leds +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/leds @@ -178,6 +178,10 @@ tl-wr1043nd) set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt" ;; +tl-wr2543n) + set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1" + ;; + wrt160nl) set_led_wlan "wlan" "WLAN" "wrt160nl:blue:wlan" "phy0tpt" ;; diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/network b/target/linux/ar71xx/base-files/etc/uci-defaults/network index c7bd419f1d..45a9423c62 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/network @@ -81,6 +81,13 @@ tl-wr1043nd) ucidef_add_switch_vlan "rtl8366rb" "2" "0 5t" ;; +tl-wr2543n) + ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2" + ucidef_add_switch "switch0" "1" "1" + ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 9t" + ucidef_add_switch_vlan "switch0" "2" "0 9t" + ;; + tl-wr841n-v1|\ tl-wr941nd) ucidef_set_interface_raw "eth" "eth0" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 7e8e25e3ac..db859b24ab 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -97,6 +97,9 @@ tplink_board_detect() { "104300"*) model="TP-Link TL-WR1043N/ND" ;; + "254300"*) + model="TP-Link TL-WR2543N/ND" + ;; "302000"*) model="TP-Link TL-MR3020" ;; @@ -247,6 +250,9 @@ ar71xx_board_detect() { *TL-WR1043ND) name="tl-wr1043nd" ;; + *TL-WR2543N*) + name="tl-wr2543n" + ;; *"DIR-615 rev. C1") name="dir-615-c1" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index db8bdaefb9..ae68db6fc0 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -132,7 +132,8 @@ platform_check_image() { tl-wr841n-v1 | \ tl-wr841n-v7 | \ tl-wr941nd | \ - tl-wr1043nd) + tl-wr1043nd | \ + tl-wr2543n) [ "$magic" != "0100" ] && { echo "Invalid image type." return 1 diff --git a/target/linux/ar71xx/config-2.6.39 b/target/linux/ar71xx/config-2.6.39 index bf662305a7..bdf2fcf64f 100644 --- a/target/linux/ar71xx/config-2.6.39 +++ b/target/linux/ar71xx/config-2.6.39 @@ -45,6 +45,7 @@ CONFIG_AR71XX_MACH_TL_MR3X20=y CONFIG_AR71XX_MACH_TL_WA901ND=y CONFIG_AR71XX_MACH_TL_WA901ND_V2=y CONFIG_AR71XX_MACH_TL_WR1043ND=y +CONFIG_AR71XX_MACH_TL_WR2543N=y CONFIG_AR71XX_MACH_TL_WR703N=y CONFIG_AR71XX_MACH_TL_WR741ND=y CONFIG_AR71XX_MACH_TL_WR741ND_V4=y @@ -183,6 +184,7 @@ CONFIG_RTL8306_PHY=y CONFIG_RTL8366RB_PHY=y CONFIG_RTL8366S_PHY=y CONFIG_RTL8366_SMI=y +CONFIG_RTL8367_PHY=y # CONFIG_SCSI_DMA is not set CONFIG_SERIAL_8250_NR_UARTS=1 CONFIG_SERIAL_8250_RUNTIME_UARTS=1 diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig index c138217af3..c22cd4abea 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Kconfig @@ -379,6 +379,15 @@ config AR71XX_MACH_TL_WR1043ND select AR71XX_DEV_LEDS_GPIO select AR71XX_DEV_USB +config AR71XX_MACH_TL_WR2543N + bool "TP-LINK TL-WR2543N/ND support" + select SOC_AR724X + select AR71XX_DEV_AP91_PCI if PCI + select AR71XX_DEV_M25P80 + select AR71XX_DEV_GPIO_BUTTONS + select AR71XX_DEV_LEDS_GPIO + select AR71XX_DEV_USB + config AR71XX_MACH_TEW_632BRP bool "TRENDnet TEW-632BRP support" select SOC_AR913X diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile index 3125c124c7..ba12234eaa 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/Makefile @@ -64,6 +64,7 @@ obj-$(CONFIG_AR71XX_MACH_TL_WR741ND_V4) += mach-tl-wr741nd-v4.o obj-$(CONFIG_AR71XX_MACH_TL_WR841N_V1) += mach-tl-wr841n.o obj-$(CONFIG_AR71XX_MACH_TL_WR941ND) += mach-tl-wr941nd.o obj-$(CONFIG_AR71XX_MACH_TL_WR1043ND) += mach-tl-wr1043nd.o +obj-$(CONFIG_AR71XX_MACH_TL_WR2543N) += mach-tl-wr2543n.o obj-$(CONFIG_AR71XX_MACH_TL_WR703N) += mach-tl-wr703n.o obj-$(CONFIG_AR71XX_MACH_UBNT) += mach-ubnt.o obj-$(CONFIG_AR71XX_MACH_WHR_HP_G300N) += mach-whr-hp-g300n.o diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr2543n.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr2543n.c new file mode 100644 index 0000000000..c547b73921 --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-tl-wr2543n.c @@ -0,0 +1,129 @@ +/* + * TP-LINK TL-WR2543ND board support + * + * Copyright (C) 2011 Gabor Juhos + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include +#include +#include + +#include "machtype.h" +#include "devices.h" +#include "dev-ap91-pci.h" +#include "dev-m25p80.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-usb.h" + +#define TL_WR2543N_GPIO_LED_WPS 0 +#define TL_WR2543N_GPIO_LED_USB 8 + +#define TL_WR2543N_GPIO_BTN_RESET 11 +#define TL_WR2543N_GPIO_BTN_WPS 12 + +#define TL_WR2543N_GPIO_RTL8367_SDA 1 +#define TL_WR2543N_GPIO_RTL8367_SCK 6 + +#define TL_WR2543N_KEYS_POLL_INTERVAL 20 /* msecs */ +#define TL_WR2543N_KEYS_DEBOUNCE_INTERVAL (3 * TL_WR2543N_KEYS_POLL_INTERVAL) + +static const char *tl_wr2543n_part_probes[] = { + "tp-link", + NULL, +}; + +static struct flash_platform_data tl_wr2543n_flash_data = { + .part_probes = tl_wr2543n_part_probes, + .max_read_len = 64, +}; + +static struct gpio_led tl_wr2543n_leds_gpio[] __initdata = { + { + .name = "tp-link:green:usb", + .gpio = TL_WR2543N_GPIO_LED_USB, + .active_low = 1, + }, { + .name = "tp-link:green:wps", + .gpio = TL_WR2543N_GPIO_LED_WPS, + .active_low = 1, + } +}; + +static struct gpio_keys_button tl_wr2543n_gpio_keys[] __initdata = { + { + .desc = "reset", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR2543N_GPIO_BTN_RESET, + .active_low = 1, + }, { + .desc = "wps", + .type = EV_KEY, + .code = KEY_WPS_BUTTON, + .debounce_interval = TL_WR2543N_KEYS_DEBOUNCE_INTERVAL, + .gpio = TL_WR2543N_GPIO_BTN_WPS, + } +}; + +static struct rtl8367_extif_config tl_wr2543n_rtl8367_extif0_cfg = { + .mode = RTL8367_EXTIF_MODE_RGMII, + .txdelay = 1, + .rxdelay = 0, + .ability = { + .force_mode = 1, + .txpause = 1, + .rxpause = 1, + .link = 1, + .duplex = 1, + .speed = RTL8367_PORT_SPEED_1000, + }, +}; + +static struct rtl8367_platform_data tl_wr2543n_rtl8367_data = { + .gpio_sda = TL_WR2543N_GPIO_RTL8367_SDA, + .gpio_sck = TL_WR2543N_GPIO_RTL8367_SCK, + .extif0_cfg = &tl_wr2543n_rtl8367_extif0_cfg, +}; + +static struct platform_device tl_wr2543n_rtl8367_device = { + .name = RTL8367_DRIVER_NAME, + .id = -1, + .dev = { + .platform_data = &tl_wr2543n_rtl8367_data, + } +}; + +static void __init tl_wr2543n_setup(void) +{ + u8 *mac = (u8 *) KSEG1ADDR(0x1f01fc00); + u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff1000); + + ar71xx_add_device_m25p80(&tl_wr2543n_flash_data); + ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(tl_wr2543n_leds_gpio), + tl_wr2543n_leds_gpio); + ar71xx_register_gpio_keys_polled(-1, TL_WR2543N_KEYS_POLL_INTERVAL, + ARRAY_SIZE(tl_wr2543n_gpio_keys), + tl_wr2543n_gpio_keys); + ar71xx_add_device_usb(); + ap91_pci_init(eeprom, mac); + + ar71xx_init_mac(ar71xx_eth0_data.mac_addr, mac, -1); + ar71xx_eth0_data.mii_bus_dev = &tl_wr2543n_rtl8367_device.dev; + ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ar71xx_eth0_data.speed = SPEED_1000; + ar71xx_eth0_data.duplex = DUPLEX_FULL; + ar71xx_eth0_pll_data.pll_1000 = 0x1a000000; + + ar71xx_add_device_eth(0); + + platform_device_register(&tl_wr2543n_rtl8367_device); +} + +MIPS_MACHINE(AR71XX_MACH_TL_WR2543N, "TL-WR2543N", "TP-LINK TL-WR2543N/ND", + tl_wr2543n_setup); diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h index 92eb88a1fb..a66046a909 100644 --- a/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h +++ b/target/linux/ar71xx/files/arch/mips/ar71xx/machtype.h @@ -57,6 +57,7 @@ enum ar71xx_mach_type { AR71XX_MACH_TL_WA901ND, /* TP-LINK TL-WA901ND */ AR71XX_MACH_TL_WA901ND_V2, /* TP-LINK TL-WA901ND v2 */ AR71XX_MACH_TL_WR1043ND, /* TP-LINK TL-WR1041ND */ + AR71XX_MACH_TL_WR2543N, /* TP-LINK TL-WR2543N/ND */ AR71XX_MACH_TL_WR703N, /* TP-LINK TL-WR703N */ AR71XX_MACH_TL_WR741ND, /* TP-LINK TL-WR741ND */ AR71XX_MACH_TL_WR741ND_V4, /* TP-LINK TL-WR741ND v4*/