From: Felix Fietkau Date: Wed, 22 Oct 2014 11:02:18 +0000 (+0000) Subject: ar71xx: add support for buffalo WZR-450HP2 X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a1837135e04b;p=openwrt%2Fstaging%2Fstintel.git ar71xx: add support for buffalo WZR-450HP2 Signed-off-by: Felix Fietkau SVN-Revision: 43026 --- diff --git a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network index fdbca5166b..743f9de124 100755 --- a/target/linux/ar71xx/base-files/etc/uci-defaults/02_network +++ b/target/linux/ar71xx/base-files/etc/uci-defaults/02_network @@ -46,7 +46,8 @@ ap136-010) ap136-020 |\ ap135-020 |\ -tl-wr1043nd-v2) +tl-wr1043nd-v2 |\ +wzr-450hp2) ucidef_set_interfaces_lan_wan "eth1" "eth0" ucidef_add_switch "switch0" "1" "1" ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 4" diff --git a/target/linux/ar71xx/base-files/lib/ar71xx.sh b/target/linux/ar71xx/base-files/lib/ar71xx.sh index 378a619d89..40e930360c 100755 --- a/target/linux/ar71xx/base-files/lib/ar71xx.sh +++ b/target/linux/ar71xx/base-files/lib/ar71xx.sh @@ -716,6 +716,9 @@ ar71xx_board_detect() { *WRT400N) name="wrt400n" ;; + *"WZR-450HP2") + name="wzr-450hp2" + ;; *"WZR-HP-AG300H/WZR-600DHP") name="wzr-hp-ag300h" ;; diff --git a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh index b8b2fa9980..6220f16a7e 100755 --- a/target/linux/ar71xx/base-files/lib/upgrade/platform.sh +++ b/target/linux/ar71xx/base-files/lib/upgrade/platform.sh @@ -200,6 +200,7 @@ platform_check_image() { wzr-hp-g300nh | \ wzr-hp-g450h | \ wzr-hp-ag300h | \ + wzr-450hp2 | \ whr-g301n | \ whr-hp-g300n | \ whr-hp-gn | \ diff --git a/target/linux/ar71xx/config-3.10 b/target/linux/ar71xx/config-3.10 index 48ff4919c1..1b3eddbb99 100644 --- a/target/linux/ar71xx/config-3.10 +++ b/target/linux/ar71xx/config-3.10 @@ -123,6 +123,7 @@ CONFIG_ATH79_MACH_WP543=y CONFIG_ATH79_MACH_WPE72=y CONFIG_ATH79_MACH_WRT160NL=y CONFIG_ATH79_MACH_WRT400N=y +CONFIG_ATH79_MACH_WZR_450HP2=y CONFIG_ATH79_MACH_WZR_HP_AG300H=y CONFIG_ATH79_MACH_WZR_HP_G300NH=y CONFIG_ATH79_MACH_WZR_HP_G300NH2=y diff --git a/target/linux/ar71xx/config-3.14 b/target/linux/ar71xx/config-3.14 index 0996ccb9b7..cc995f4480 100644 --- a/target/linux/ar71xx/config-3.14 +++ b/target/linux/ar71xx/config-3.14 @@ -124,6 +124,7 @@ CONFIG_ATH79_MACH_WP543=y CONFIG_ATH79_MACH_WPE72=y CONFIG_ATH79_MACH_WRT160NL=y CONFIG_ATH79_MACH_WRT400N=y +CONFIG_ATH79_MACH_WZR_450HP2=y CONFIG_ATH79_MACH_WZR_HP_AG300H=y CONFIG_ATH79_MACH_WZR_HP_G300NH=y CONFIG_ATH79_MACH_WZR_HP_G300NH2=y diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c new file mode 100644 index 0000000000..428876fccb --- /dev/null +++ b/target/linux/ar71xx/files/arch/mips/ath79/mach-wzr-450hp2.c @@ -0,0 +1,221 @@ +/* + * Buffalo WZR-450HP2 board support + * + * Copyright (c) 2013 Gabor Juhos + * + * Based on the Qualcomm Atheros AP135/AP136 reference board support code + * Copyright (c) 2012 Qualcomm Atheros + * + * Permission to use, copy, modify, and/or distribute this software for any + * purpose with or without fee is hereby granted, provided that the above + * copyright notice and this permission notice appear in all copies. + * + * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES + * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR + * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES + * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN + * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF + * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. + * + */ + +#include +#include +#include +#include +#include +#include + +#include + +#include "common.h" +#include "dev-eth.h" +#include "dev-gpio-buttons.h" +#include "dev-leds-gpio.h" +#include "dev-m25p80.h" +#include "dev-spi.h" +#include "dev-usb.h" +#include "dev-wmac.h" +#include "machtypes.h" + +#define WZR_450HP2_KEYS_POLL_INTERVAL 20 /* msecs */ +#define WZR_450HP2_KEYS_DEBOUNCE_INTERVAL (3 * WZR_450HP2_KEYS_POLL_INTERVAL) + +#define WZR_450HP2_WMAC_CALDATA_OFFSET 0x1000 + +static struct mtd_partition wzrhpg450h_partitions[] = { + { + .name = "u-boot", + .offset = 0, + .size = 0x0040000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "u-boot-env", + .offset = 0x0040000, + .size = 0x0010000, + }, { + .name = "ART", + .offset = 0x0ff0000, + .size = 0x0010000, + .mask_flags = MTD_WRITEABLE, + }, { + .name = "firmware", + .offset = 0x0050000, + .size = 0x0f90000, + }, { + .name = "user_property", + .offset = 0x0fe0000, + .size = 0x0010000, + } +}; + +static struct flash_platform_data wzr_450hp2_flash_data = { + .parts = wzrhpg450h_partitions, + .nr_parts = ARRAY_SIZE(wzrhpg450h_partitions), +}; + +static struct gpio_led wzr_450hp2_leds_gpio[] __initdata = { + { + .name = "buffalo:green:wps", + .gpio = 3, + .active_low = 1, + }, + { + .name = "buffalo:green:system", + .gpio = 20, + .active_low = 1, + }, + { + .name = "buffalo:green:wlan", + .gpio = 18, + .active_low = 1, + }, +}; + +static struct gpio_keys_button wzr_450hp2_gpio_keys[] __initdata = { + { + .desc = "Reset button", + .type = EV_KEY, + .code = KEY_RESTART, + .debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 17, + .active_low = 1, + }, + { + .desc = "RFKILL button", + .type = EV_KEY, + .code = KEY_RFKILL, + .debounce_interval = WZR_450HP2_KEYS_DEBOUNCE_INTERVAL, + .gpio = 21, + .active_low = 1, + }, +}; + +static const struct ar8327_led_info wzr_450hp2_leds_ar8327[] = { + AR8327_LED_INFO(PHY0_0, HW, "buffalo:green:lan1"), + AR8327_LED_INFO(PHY1_0, HW, "buffalo:green:lan2"), + AR8327_LED_INFO(PHY2_0, HW, "buffalo:green:lan3"), + AR8327_LED_INFO(PHY3_0, HW, "buffalo:green:lan4"), + AR8327_LED_INFO(PHY4_0, HW, "buffalo:green:wan"), +}; + +/* GMAC0 of the AR8327 switch is connected to the QCA9558 SoC via SGMII */ +static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad0_cfg = { + .mode = AR8327_PAD_MAC_SGMII, + .sgmii_delay_en = true, +}; + +/* GMAC6 of the AR8327 switch is connected to the QCA9558 SoC via RGMII */ +static struct ar8327_pad_cfg wzr_450hp2_ar8327_pad6_cfg = { + .mode = AR8327_PAD_MAC_RGMII, + .txclk_delay_en = true, + .rxclk_delay_en = true, + .txclk_delay_sel = AR8327_CLK_DELAY_SEL1, + .rxclk_delay_sel = AR8327_CLK_DELAY_SEL2, +}; + +static struct ar8327_led_cfg wzr_450hp2_ar8327_led_cfg = { + .led_ctrl0 = 0xcc35cc35, + .led_ctrl1 = 0xca35ca35, + .led_ctrl2 = 0xc935c935, + .led_ctrl3 = 0x03ffff00, + .open_drain = true, +}; + +static struct ar8327_platform_data wzr_450hp2_ar8327_data = { + .pad0_cfg = &wzr_450hp2_ar8327_pad0_cfg, + .pad6_cfg = &wzr_450hp2_ar8327_pad6_cfg, + .port0_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .port6_cfg = { + .force_link = 1, + .speed = AR8327_PORT_SPEED_1000, + .duplex = 1, + .txpause = 1, + .rxpause = 1, + }, + .led_cfg = &wzr_450hp2_ar8327_led_cfg, + .num_leds = ARRAY_SIZE(wzr_450hp2_leds_ar8327), + .leds = wzr_450hp2_leds_ar8327, +}; + +static struct mdio_board_info wzr_450hp2_mdio0_info[] = { + { + .bus_id = "ag71xx-mdio.0", + .phy_addr = 0, + .platform_data = &wzr_450hp2_ar8327_data, + }, +}; + +static void __init wzr_450hp2_setup(void) +{ + u8 *art = (u8 *) KSEG1ADDR(0x1fff0000); + u8 *mac_wan = art; + u8 *mac_lan = mac_wan + ETH_ALEN; + + ath79_register_m25p80(&wzr_450hp2_flash_data); + + ath79_register_leds_gpio(-1, ARRAY_SIZE(wzr_450hp2_leds_gpio), + wzr_450hp2_leds_gpio); + ath79_register_gpio_keys_polled(-1, WZR_450HP2_KEYS_POLL_INTERVAL, + ARRAY_SIZE(wzr_450hp2_gpio_keys), + wzr_450hp2_gpio_keys); + + ath79_register_wmac(art + WZR_450HP2_WMAC_CALDATA_OFFSET, mac_lan); + + mdiobus_register_board_info(wzr_450hp2_mdio0_info, + ARRAY_SIZE(wzr_450hp2_mdio0_info)); + ath79_register_mdio(0, 0x0); + + ath79_setup_qca955x_eth_cfg(QCA955X_ETH_CFG_RGMII_EN); + + /* GMAC0 is connected to the RMGII interface */ + ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII; + ath79_eth0_data.phy_mask = BIT(0); + ath79_eth0_data.mii_bus_dev = &ath79_mdio0_device.dev; + ath79_eth0_pll_data.pll_1000 = 0x56000000; + + ath79_init_mac(ath79_eth0_data.mac_addr, mac_wan, 0); + ath79_register_eth(0); + + /* GMAC1 is connected to the SGMII interface */ + ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII; + ath79_eth1_data.speed = SPEED_1000; + ath79_eth1_data.duplex = DUPLEX_FULL; + ath79_eth1_pll_data.pll_1000 = 0x03000101; + + ath79_init_mac(ath79_eth1_data.mac_addr, mac_lan, 0); + ath79_register_eth(1); + + ath79_register_usb(); +} + +MIPS_MACHINE(ATH79_MACH_WZR_450HP2, "WZR-450HP2", + "Buffalo WZR-450HP2", wzr_450hp2_setup); + diff --git a/target/linux/ar71xx/generic/profiles/buffalo.mk b/target/linux/ar71xx/generic/profiles/buffalo.mk index 80e7192106..900f6a846e 100644 --- a/target/linux/ar71xx/generic/profiles/buffalo.mk +++ b/target/linux/ar71xx/generic/profiles/buffalo.mk @@ -49,6 +49,17 @@ endef $(eval $(call Profile,WZRHPG450H)) +define Profile/WZR450HP2 + NAME:=Buffalo WZR-450HP2 + PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev +endef + +define Profile/WZR450HP2/Description + Package set optimized for the Buffalo WZR-450HP2 +endef + +$(eval $(call Profile,WZR450HP2)) + define Profile/WZR600DHP NAME:=Buffalo WZR-600DHP PACKAGES:=kmod-usb-core kmod-usb2 kmod-ledtrig-usbdev diff --git a/target/linux/ar71xx/image/Makefile b/target/linux/ar71xx/image/Makefile index f0e65861f8..3256cb8bb5 100644 --- a/target/linux/ar71xx/image/Makefile +++ b/target/linux/ar71xx/image/Makefile @@ -1284,6 +1284,7 @@ $(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG300NH2,wzr-hp-g300nh2,WZR-HP-G $(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPAG300H,wzr-hp-ag300h,WZR-HP-AG300H,ttyS0,115200,WZR-HP-AG300H)) $(eval $(call SingleProfile,WZRHP64K,64kraw,WZRHPG450H,wzr-hp-g450h,WZR-HP-G450H,ttyS0,115200,WZR-HP-AG450H)) $(eval $(call SingleProfile,WZRHP64K,64kraw,WZR600DHP,wzr-600dhp,WZR-HP-AG300H,ttyS0,115200,WZR-600DHP)) +$(eval $(call SingleProfile,WZRHP64K,64kraw,WZR450HP2,wzr-450hp2,WZR-450HP2,ttyS0,115200,WZR-450HP2)) $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H28,zcn-1523h-2-8,ZCN-1523H-2,ttyS0,115200,$$(zcn1523h_mtdlayout))) $(eval $(call SingleProfile,Zcomax,64k,ZCN1523H516,zcn-1523h-5-16,ZCN-1523H-5,ttyS0,115200,$$(zcn1523h_mtdlayout))) diff --git a/target/linux/ar71xx/patches-3.14/729-MIPS-ath79-add-WZR-450HP2.patch b/target/linux/ar71xx/patches-3.14/729-MIPS-ath79-add-WZR-450HP2.patch new file mode 100644 index 0000000000..d7364e4b36 --- /dev/null +++ b/target/linux/ar71xx/patches-3.14/729-MIPS-ath79-add-WZR-450HP2.patch @@ -0,0 +1,39 @@ +--- a/arch/mips/ath79/machtypes.h ++++ b/arch/mips/ath79/machtypes.h +@@ -182,6 +182,7 @@ enum ath79_mach_type { + ATH79_MACH_WZR_HP_G300NH, /* Buffalo WZR-HP-G300NH */ + ATH79_MACH_WZR_HP_G300NH2, /* Buffalo WZR-HP-G300NH2 */ + ATH79_MACH_WZR_HP_G450H, /* Buffalo WZR-HP-G450H */ ++ ATH79_MACH_WZR_450HP2, /* Buffalo WZR-450HP2 */ + ATH79_MACH_ZCN_1523H_2, /* Zcomax ZCN-1523H-2-xx */ + ATH79_MACH_ZCN_1523H_5, /* Zcomax ZCN-1523H-5-xx */ + }; +--- a/arch/mips/ath79/Kconfig ++++ b/arch/mips/ath79/Kconfig +@@ -263,6 +263,16 @@ config ATH79_MACH_WZR_HP_G450H + select ATH79_DEV_M25P80 + select ATH79_DEV_USB + ++config ATH79_MACH_WZR_450HP2 ++ bool "Buffalo WZR-450HP2 board support" ++ select SOC_QCA955X ++ select ATH79_DEV_ETH ++ select ATH79_DEV_GPIO_BUTTONS ++ select ATH79_DEV_LEDS_GPIO ++ select ATH79_DEV_M25P80 ++ select ATH79_DEV_USB ++ select ATH79_DEV_WMAC ++ + config ATH79_MACH_WP543 + bool "Compex WP543/WPJ543 board support" + select SOC_AR71XX +--- a/arch/mips/ath79/Makefile ++++ b/arch/mips/ath79/Makefile +@@ -140,6 +140,7 @@ obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH) + + obj-$(CONFIG_ATH79_MACH_WZR_HP_G300NH2) += mach-wzr-hp-g300nh2.o + obj-$(CONFIG_ATH79_MACH_WZR_HP_AG300H) += mach-wzr-hp-ag300h.o + obj-$(CONFIG_ATH79_MACH_WZR_HP_G450H) += mach-wzr-hp-g450h.o ++obj-$(CONFIG_ATH79_MACH_WZR_450HP2) += mach-wzr-450hp2.o + obj-$(CONFIG_ATH79_MACH_ZCN_1523H) += mach-zcn-1523h.o + obj-$(CONFIG_ATH79_MACH_CARAMBOLA2) += mach-carambola2.o + obj-$(CONFIG_ATH79_MACH_NBG6716) += mach-nbg6716.o