From: Rafał Miłecki Date: Mon, 20 Jun 2016 20:57:09 +0000 (+0200) Subject: bcm53xx: backport BCM5301X patches for SRAB X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a180f905187c57497331886e6489646b8bcf44d5;p=openwrt%2Fstaging%2Fjogo.git bcm53xx: backport BCM5301X patches for SRAB Signed-off-by: Rafał Miłecki --- diff --git a/target/linux/bcm53xx/patches-4.4/037-0001-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch b/target/linux/bcm53xx/patches-4.4/037-0001-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch new file mode 100644 index 0000000000..4549396d2b --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/037-0001-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch @@ -0,0 +1,58 @@ +From 1b47b98acce2db0da632d056821420b33205b8b2 Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Tue, 19 Apr 2016 08:56:46 +0200 +Subject: [PATCH] ARM: BCM5301X: Add DT entry for SPI controller and NOR flash +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Controller is present on every BCM4708* board but only few devices have +serial flash attached so mark it as disabled by default. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + +--- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts ++++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts +@@ -59,3 +59,7 @@ + &uart0 { + status = "okay"; + }; ++ ++&spi_nor { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -122,3 +122,7 @@ + &uart0 { + status = "okay"; + }; ++ ++&spi_nor { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -225,6 +225,20 @@ + #address-cells = <1>; + #size-cells = <1>; + }; ++ ++ spi@29000 { ++ reg = <0x00029000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ spi_nor: spi-nor@0 { ++ compatible = "jedec,spi-nor"; ++ reg = <0>; ++ spi-max-frequency = <20000000>; ++ linux,part-probe = "ofpart", "bcm47xxpart"; ++ status = "disabled"; ++ }; ++ }; + }; + + lcpll0: lcpll0@1800c100 { diff --git a/target/linux/bcm53xx/patches-4.4/037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch b/target/linux/bcm53xx/patches-4.4/037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch new file mode 100644 index 0000000000..f15cfb79c4 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/037-0002-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch @@ -0,0 +1,75 @@ +From 5f79985dcfec73d7a09ed99c40c28b64552518fe Mon Sep 17 00:00:00 2001 +From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= +Date: Wed, 27 Apr 2016 09:05:03 +0200 +Subject: [PATCH] ARM: BCM5301X: Enable SPI-NOR on dual flash devices +MIME-Version: 1.0 +Content-Type: text/plain; charset=UTF-8 +Content-Transfer-Encoding: 8bit + +Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and +NOR flash") enabled SPI-NOR device on routers using serial flash only. +However there are also devices with two flash memories: +1) Small SPI attached flash used mostly for booting +2) Bigger NAND used mostly for storing firmware +On such devices we still need SPI-NOR e.g. to access NVRAM data. + +Signed-off-by: Rafał Miłecki +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts | 4 ++++ + arch/arm/boot/dts/bcm4708-netgear-r6250.dts | 4 ++++ + arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts | 4 ++++ + arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts | 4 ++++ + arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts | 4 ++++ + 5 files changed, 20 insertions(+) + +--- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts ++++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts +@@ -147,3 +147,7 @@ + &usb3 { + vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; + }; ++ ++&spi_nor { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts +@@ -90,3 +90,7 @@ + &usb3 { + vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; + }; ++ ++&spi_nor { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts ++++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts +@@ -82,3 +82,7 @@ + }; + }; + }; ++ ++&spi_nor { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts ++++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts +@@ -131,3 +131,7 @@ + &usb2 { + vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; + }; ++ ++&spi_nor { ++ status = "okay"; ++}; +--- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts ++++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts +@@ -113,3 +113,7 @@ + &usb3 { + vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; + }; ++ ++&spi_nor { ++ status = "okay"; ++}; diff --git a/target/linux/bcm53xx/patches-4.4/037-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch b/target/linux/bcm53xx/patches-4.4/037-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch deleted file mode 100644 index 4549396d2b..0000000000 --- a/target/linux/bcm53xx/patches-4.4/037-ARM-BCM5301X-Add-DT-entry-for-SPI-controller-and-NOR.patch +++ /dev/null @@ -1,58 +0,0 @@ -From 1b47b98acce2db0da632d056821420b33205b8b2 Mon Sep 17 00:00:00 2001 -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Tue, 19 Apr 2016 08:56:46 +0200 -Subject: [PATCH] ARM: BCM5301X: Add DT entry for SPI controller and NOR flash -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Controller is present on every BCM4708* board but only few devices have -serial flash attached so mark it as disabled by default. - -Signed-off-by: Rafał Miłecki -Signed-off-by: Florian Fainelli ---- - ---- a/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -+++ b/arch/arm/boot/dts/bcm4708-luxul-xwc-1000.dts -@@ -59,3 +59,7 @@ - &uart0 { - status = "okay"; - }; -+ -+&spi_nor { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -+++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts -@@ -122,3 +122,7 @@ - &uart0 { - status = "okay"; - }; -+ -+&spi_nor { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm5301x.dtsi -+++ b/arch/arm/boot/dts/bcm5301x.dtsi -@@ -225,6 +225,20 @@ - #address-cells = <1>; - #size-cells = <1>; - }; -+ -+ spi@29000 { -+ reg = <0x00029000 0x1000>; -+ #address-cells = <1>; -+ #size-cells = <0>; -+ -+ spi_nor: spi-nor@0 { -+ compatible = "jedec,spi-nor"; -+ reg = <0>; -+ spi-max-frequency = <20000000>; -+ linux,part-probe = "ofpart", "bcm47xxpart"; -+ status = "disabled"; -+ }; -+ }; - }; - - lcpll0: lcpll0@1800c100 { diff --git a/target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch b/target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch new file mode 100644 index 0000000000..0210f7e2aa --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/038-0001-ARM-dts-Enable-SRAB-switch-and-GMACs-on-5301x-DTS.patch @@ -0,0 +1,63 @@ +From 59f0ce1a3ebb9288fc8c1400aa503e923621161e Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Mon, 23 May 2016 16:38:00 -0700 +Subject: [PATCH 1/3] ARM: dts: Enable SRAB switch and GMACs on 5301x DTS + +Add the Switch Register Access Block which is a special piece of +hardware allowing us to perform indirect read/writes towards the +integrated BCM5301X Ethernet switch. + +We also add the 4 Gigabit MAC Device Tree nodes within the brcm,bus-axi +bus node to get proper binding between the BCMA instantiated core and +the Device Tree nodes. We will need that to be able to reference +Ethernet Device Tree nodes in a future patch adding the switch ports +layout. + +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 27 +++++++++++++++++++++++++++ + 1 file changed, 27 insertions(+) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -239,6 +239,22 @@ + status = "disabled"; + }; + }; ++ ++ gmac0: ethernet@24000 { ++ reg = <0x24000 0x800>; ++ }; ++ ++ gmac1: ethernet@25000 { ++ reg = <0x25000 0x800>; ++ }; ++ ++ gmac2: ethernet@26000 { ++ reg = <0x26000 0x800>; ++ }; ++ ++ gmac3: ethernet@27000 { ++ reg = <0x27000 0x800>; ++ }; + }; + + lcpll0: lcpll0@1800c100 { +@@ -260,6 +276,17 @@ + "sata2"; + }; + ++ srab: srab@18007000 { ++ compatible = "brcm,bcm5301x-srab"; ++ reg = <0x18007000 0x1000>; ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ status = "disabled"; ++ ++ /* ports are defined in board DTS */ ++ }; ++ + nand: nand@18028000 { + compatible = "brcm,nand-iproc", "brcm,brcmnand-v6.1", "brcm,brcmnand"; + reg = <0x18028000 0x600>, <0x1811a408 0x600>, <0x18028f00 0x20>; diff --git a/target/linux/bcm53xx/patches-4.4/038-0002-ARM-dts-BCM5301X-Add-SRAB-interrupts.patch b/target/linux/bcm53xx/patches-4.4/038-0002-ARM-dts-BCM5301X-Add-SRAB-interrupts.patch new file mode 100644 index 0000000000..95375fc338 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/038-0002-ARM-dts-BCM5301X-Add-SRAB-interrupts.patch @@ -0,0 +1,38 @@ +From 2cd0c0202f138fa95b3fbb027e87b191ad0b1884 Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Tue, 24 May 2016 11:41:58 -0700 +Subject: [PATCH 2/3] ARM: dts: BCM5301X: Add SRAB interrupts + +Add interrupt mapping for the Switch Register Access Block. Only 12 +interrupts are usable at the moment even though up to 32 are dedicated +to the SRAB. + +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm5301x.dtsi | 15 +++++++++++++++ + 1 file changed, 15 insertions(+) + +--- a/arch/arm/boot/dts/bcm5301x.dtsi ++++ b/arch/arm/boot/dts/bcm5301x.dtsi +@@ -153,6 +153,21 @@ + /* ChipCommon */ + <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>, + ++ /* Switch Register Access Block */ ++ <0x00007000 0 &gic GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 1 &gic GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 2 &gic GIC_SPI 97 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 3 &gic GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 4 &gic GIC_SPI 99 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 5 &gic GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 6 &gic GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 7 &gic GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 8 &gic GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 9 &gic GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 10 &gic GIC_SPI 105 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 11 &gic GIC_SPI 106 IRQ_TYPE_LEVEL_HIGH>, ++ <0x00007000 12 &gic GIC_SPI 107 IRQ_TYPE_LEVEL_HIGH>, ++ + /* PCIe Controller 0 */ + <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>, + <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>, diff --git a/target/linux/bcm53xx/patches-4.4/038-0003-ARM-dts-BCM5310x-Enable-switch-ports-on-SmartRG-SR40.patch b/target/linux/bcm53xx/patches-4.4/038-0003-ARM-dts-BCM5310x-Enable-switch-ports-on-SmartRG-SR40.patch new file mode 100644 index 0000000000..7ddb99bb33 --- /dev/null +++ b/target/linux/bcm53xx/patches-4.4/038-0003-ARM-dts-BCM5310x-Enable-switch-ports-on-SmartRG-SR40.patch @@ -0,0 +1,60 @@ +From 2df1808dc0e2b5358e13beb95192b15200017776 Mon Sep 17 00:00:00 2001 +From: Florian Fainelli +Date: Wed, 25 May 2016 16:55:35 -0700 +Subject: [PATCH 3/3] ARM: dts: BCM5310x: Enable switch ports on SmartRG + SR400AC + +Define the port mapping for the SmartRG SR400ACE device. + +Reviewed-by: Andrew Lunn +Signed-off-by: Florian Fainelli +--- + arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts | 40 +++++++++++++++++++++++++++ + 1 file changed, 40 insertions(+) + +--- a/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts ++++ b/arch/arm/boot/dts/bcm4708-smartrg-sr400ac.dts +@@ -126,3 +126,43 @@ + &spi_nor { + status = "okay"; + }; ++ ++&srab { ++ status = "okay"; ++ ++ ports { ++ #address-cells = <1>; ++ #size-cells = <0>; ++ ++ port@0 { ++ reg = <0>; ++ label = "lan4"; ++ }; ++ ++ port@1 { ++ reg = <1>; ++ label = "lan3"; ++ }; ++ ++ port@2 { ++ reg = <2>; ++ label = "lan2"; ++ }; ++ ++ port@3 { ++ reg = <3>; ++ label = "lan1"; ++ }; ++ ++ port@4 { ++ reg = <4>; ++ label = "wan"; ++ }; ++ ++ port@5 { ++ reg = <5>; ++ label = "cpu"; ++ ethernet = <&gmac0>; ++ }; ++ }; ++}; diff --git a/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch b/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch deleted file mode 100644 index c9bb9af479..0000000000 --- a/target/linux/bcm53xx/patches-4.4/130-ARM-BCM5301X-Enable-SPI-NOR-on-dual-flash-devices.patch +++ /dev/null @@ -1,67 +0,0 @@ -From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= -Date: Wed, 27 Apr 2016 08:58:01 +0200 -Subject: [PATCH] ARM: BCM5301X: Enable SPI-NOR on dual flash devices -MIME-Version: 1.0 -Content-Type: text/plain; charset=UTF-8 -Content-Transfer-Encoding: 8bit - -Commit 1b47b98acce2 ("ARM: BCM5301X: Add DT entry for SPI controller and -NOR flash") enabled SPI-NOR device on routers using serial flash only. -However there are also devices with two flash memories: -1) Small SPI attached flash used mostly for booting -2) Bigger NAND used mostly for storing firmware -On such devices we still need SPI-NOR e.g. to access NVRAM data. - -Signed-off-by: Rafał Miłecki ---- - ---- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -+++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts -@@ -147,3 +147,7 @@ - &usb3 { - vcc-gpio = <&chipcommon 10 GPIO_ACTIVE_LOW>; - }; -+ -+&spi_nor { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts -@@ -90,3 +90,7 @@ - &usb3 { - vcc-gpio = <&chipcommon 0 GPIO_ACTIVE_HIGH>; - }; -+ -+&spi_nor { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -+++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts -@@ -82,3 +82,7 @@ - }; - }; - }; -+ -+&spi_nor { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -+++ b/arch/arm/boot/dts/bcm4709-buffalo-wxr-1900dhp.dts -@@ -131,3 +131,7 @@ - &usb2 { - vcc-gpio = <&chipcommon 13 GPIO_ACTIVE_HIGH>; - }; -+ -+&spi_nor { -+ status = "okay"; -+}; ---- a/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -+++ b/arch/arm/boot/dts/bcm47094-dlink-dir-885l.dts -@@ -113,3 +113,7 @@ - &usb3 { - vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>; - }; -+ -+&spi_nor { -+ status = "okay"; -+};