From: John Crispin <john@openwrt.org>
Date: Wed, 16 Mar 2016 09:27:04 +0000 (+0000)
Subject: ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg
X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a14ecde50e918c6c438054878fc51120649aa5ee;p=openwrt%2Fsvn-archive%2Farchive.git

ar71xx: Clear bits in ath79_setup_qca955x_eth_cfg

Some u-boot versions for QCA955x set currently not cleared bits depending
on the used link speed. This breaks the rx/tx under OpenWrt. The mach-*.c
file is responsible to select the correct configuration bits and thus the
ath79_setup_qca955x_eth_cfg has to clear the unset.

Signed-off-by: Sven Eckelmann <sven.eckelmann@open-mesh.com>

SVN-Revision: 49028
---

diff --git a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
index b43c80a376..2f2825f945 100644
--- a/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
+++ b/target/linux/ar71xx/files/arch/mips/ath79/dev-eth.c
@@ -833,14 +833,24 @@ void __init ath79_setup_ar934x_eth_rx_delay(unsigned int rxd,
 void __init ath79_setup_qca955x_eth_cfg(u32 mask)
 {
 	void __iomem *base;
-	u32 t;
+	u32 t, m;
+
+	m = QCA955X_ETH_CFG_RGMII_EN |
+	    QCA955X_ETH_CFG_MII_GE0 |
+	    QCA955X_ETH_CFG_GMII_GE0 |
+	    QCA955X_ETH_CFG_MII_GE0_MASTER |
+	    QCA955X_ETH_CFG_MII_GE0_SLAVE |
+	    QCA955X_ETH_CFG_GE0_ERR_EN |
+	    QCA955X_ETH_CFG_GE0_SGMII |
+	    QCA955X_ETH_CFG_RMII_GE0 |
+	    QCA955X_ETH_CFG_MII_CNTL_SPEED |
+	    QCA955X_ETH_CFG_RMII_GE0_MASTER;
 
 	base = ioremap(QCA955X_GMAC_BASE, QCA955X_GMAC_SIZE);
 
 	t = __raw_readl(base + QCA955X_GMAC_REG_ETH_CFG);
 
-	t &= ~(QCA955X_ETH_CFG_RGMII_EN | QCA955X_ETH_CFG_GE0_SGMII);
-
+	t &= ~m;
 	t |= mask;
 
 	__raw_writel(t, base + QCA955X_GMAC_REG_ETH_CFG);