From: Łukasz Majewski Date: Wed, 25 Apr 2012 23:30:18 +0000 (+0000) Subject: misc:pmic:trats: Correct procedure of enabling/disabling USB regulators X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a0f5b5a3a28e5ba82515e58bf6a2209f6b7cb684;p=project%2Fbcm63xx%2Fu-boot.git misc:pmic:trats: Correct procedure of enabling/disabling USB regulators In the MAX8997, LDO regulators needs to preserve previously set voltage values. Signed-off-by: Lukasz Majewski Signed-off-by: Kyungmin Park Signed-off-by: Minkyu Kang --- diff --git a/board/samsung/trats/trats.c b/board/samsung/trats/trats.c index 08ca63d75f..a8b2b11c4c 100644 --- a/board/samsung/trats/trats.c +++ b/board/samsung/trats/trats.c @@ -220,6 +220,7 @@ int board_mmc_init(bd_t *bis) static int s5pc210_phy_control(int on) { int ret = 0; + u32 val = 0; struct pmic *p = get_pmic(); if (pmic_probe(p)) @@ -228,11 +229,17 @@ static int s5pc210_phy_control(int on) if (on) { ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL, ENSAFEOUT1, LDO_ON); - ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, EN_LDO); - ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, EN_LDO); + ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val); + ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, EN_LDO | val); + + ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val); + ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, EN_LDO | val); } else { - ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, DIS_LDO); - ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, DIS_LDO); + ret |= pmic_reg_read(p, MAX8997_REG_LDO8CTRL, &val); + ret |= pmic_reg_write(p, MAX8997_REG_LDO8CTRL, DIS_LDO | val); + + ret |= pmic_reg_read(p, MAX8997_REG_LDO3CTRL, &val); + ret |= pmic_reg_write(p, MAX8997_REG_LDO3CTRL, DIS_LDO | val); ret |= pmic_set_output(p, MAX8997_REG_SAFEOUTCTRL, ENSAFEOUT1, LDO_OFF); }