From: Anson Huang Date: Sun, 12 May 2019 08:38:22 +0000 (+0000) Subject: firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a0b14e6585b97b52765f9cbd86cedb7bb382159b;p=openwrt%2Fstaging%2Fblogic.git firmware: imx: SCU irq should ONLY be enabled after SCU IPC is ready The imx_scu_irq_group_enable() is normally called during module driver probe phase to enable SCU group irq, if SCU IPC is NOT ready, below dump will show out: [ 0.933001] Hardware name: Freescale i.MX8QXP MEK (DT) [ 0.938129] pstate: 60000005 (nZCv daif -PAN -UAO) [ 0.942907] pc : imx_scu_call_rpc+0x114/0x158 [ 0.947251] lr : imx_scu_irq_group_enable+0x74/0xc4 [ 0.952113] sp : ffff00001005bae0 [ 0.955415] x29: ffff00001005bae0 x28: ffff0000111bb0a0 [ 0.960712] x27: ffff00001140b000 x26: ffff00001111068c [ 0.966011] x25: ffff0000111bb100 x24: 0000000000000000 [ 0.971311] x23: ffff0000113d9cd8 x22: 0000000000000001 [ 0.976610] x21: 0000000000000001 x20: ffff80083b51a410 [ 0.981909] x19: ffff000011259000 x18: 0000000000000480 [ 0.987209] x17: 000000000023ffb8 x16: 0000000000000010 [ 0.992508] x15: 000000000000023f x14: ffffffffffffffff [ 0.997807] x13: 0000000000000018 x12: 0000000000000030 [ 1.003107] x11: 0000000000000003 x10: 0101010101010101 [ 1.008406] x9 : ffffffffffffffff x8 : 7f7f7f7f7f7f7f7f [ 1.013706] x7 : fefefeff646c606d x6 : 0000000000000000 [ 1.019005] x5 : ffff0000112596c8 x4 : 0000000000000008 [ 1.024304] x3 : 0000000000000003 x2 : 0000000000000001 [ 1.029604] x1 : ffff00001005bb58 x0 : 0000000000000000 [ 1.034905] Call trace: [ 1.037341] imx_scu_call_rpc+0x114/0x158 [ 1.041334] imx_scu_irq_group_enable+0x74/0xc4 [ 1.045856] imx_sc_wdt_probe+0x24/0x150 [ 1.049766] platform_drv_probe+0x4c/0xb0 [ 1.053762] really_probe+0x1f8/0x2c8 [ 1.057407] driver_probe_device+0x58/0xfc [ 1.061490] device_driver_attach+0x68/0x70 [ 1.065660] __driver_attach+0x94/0xdc [ 1.069397] bus_for_each_dev+0x64/0xc0 [ 1.073220] driver_attach+0x20/0x28 [ 1.076782] bus_add_driver+0x148/0x1fc [ 1.080601] driver_register+0x68/0x120 [ 1.084424] __platform_driver_register+0x4c/0x54 [ 1.089120] imx_sc_wdt_driver_init+0x18/0x20 [ 1.093463] do_one_initcall+0x58/0x1b8 [ 1.097287] kernel_init_freeable+0x1cc/0x288 [ 1.101630] kernel_init+0x10/0x100 [ 1.105101] ret_from_fork+0x10/0x18 [ 1.108669] ---[ end trace 9e03302114457de9 ]--- [ 1.113296] enable irq failed, group 1, mask 1, ret -22 To avoid such scenario, return -EPROBE_DEFER in imx_scu_irq_group_enable() API if SCU IPC is NOT ready, then module driver which calls this API in probe phase will defer probe after SCU IPC ready. Fixes: 851826c7566e ("firmware: imx: enable imx scu general irq function") Signed-off-by: Anson Huang Signed-off-by: Shawn Guo --- diff --git a/drivers/firmware/imx/imx-scu-irq.c b/drivers/firmware/imx/imx-scu-irq.c index 043833ad3c1a..687121f8c4d5 100644 --- a/drivers/firmware/imx/imx-scu-irq.c +++ b/drivers/firmware/imx/imx-scu-irq.c @@ -100,6 +100,9 @@ int imx_scu_irq_group_enable(u8 group, u32 mask, u8 enable) struct imx_sc_rpc_msg *hdr = &msg.hdr; int ret; + if (!imx_sc_irq_ipc_handle) + return -EPROBE_DEFER; + hdr->ver = IMX_SC_RPC_VERSION; hdr->svc = IMX_SC_RPC_SVC_IRQ; hdr->func = IMX_SC_IRQ_FUNC_ENABLE;