From: Allen Martin Date: Wed, 19 Dec 2012 21:02:36 +0000 (-0800) Subject: Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged X-Git-Url: http://git.lede-project.org./?a=commitdiff_plain;h=a098cf41fdb2a6607c675f7fe4f3164617c9367e;p=project%2Fbcm63xx%2Fu-boot.git Merge remote-tracking branch 'u-boot/master' into u-boot-arm-merged Conflicts: README arch/arm/cpu/armv7/exynos/clock.c board/samsung/universal_c210/universal.c drivers/misc/Makefile drivers/power/power_fsl.c include/configs/mx35pdk.h include/configs/mx53loco.h include/configs/seaboard.h --- a098cf41fdb2a6607c675f7fe4f3164617c9367e diff --cc README index 037513a134,f386041140..653ef6aa4a --- a/README +++ b/README @@@ -1469,22 -1486,16 +1486,30 @@@ CBFS (Coreboot Filesystem) suppor Normally display is black on white background; define CONFIG_SYS_WHITE_ON_BLACK to get it inverted. - + CONFIG_LCD_ALIGNMENT + + Normally the LCD is page-aligned (tyically 4KB). If this is + defined then the LCD will be aligned to this value instead. + For ARM it is sometimes useful to use MMU_SECTION_SIZE + here, since it is cheaper to change data cache settings on + a per-section basis. + + CONFIG_CONSOLE_SCROLL_LINES + + When the console need to be scrolled, this is the number of + lines to scroll by. It defaults to 1. Increasing this makes + the console jump but can help speed up operation when scrolling + is slow. + + CONFIG_LCD_BMP_RLE8 + + Support drawing of RLE8-compressed bitmaps on the LCD. + + CONFIG_I2C_EDID + + Enables an 'i2c edid' command which can read EDID + information over I2C from an attached LCD display. + - - Splash Screen Support: CONFIG_SPLASH_SCREEN If this option is set, the environment is checked for diff --cc arch/arm/cpu/armv7/exynos/clock.c index fe61f88af4,21e45d2e82..c6c66814e5 --- a/arch/arm/cpu/armv7/exynos/clock.c +++ b/arch/arm/cpu/armv7/exynos/clock.c @@@ -718,207 -732,19 +718,221 @@@ static unsigned long exynos5_get_i2c_cl return aclk_66; } +int exynos5_set_epll_clk(unsigned long rate) +{ + unsigned int epll_con, epll_con_k; + unsigned int i; + unsigned int lockcnt; + unsigned int start; + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + epll_con = readl(&clk->epll_con0); + epll_con &= ~((EPLL_CON0_LOCK_DET_EN_MASK << + EPLL_CON0_LOCK_DET_EN_SHIFT) | + EPLL_CON0_MDIV_MASK << EPLL_CON0_MDIV_SHIFT | + EPLL_CON0_PDIV_MASK << EPLL_CON0_PDIV_SHIFT | + EPLL_CON0_SDIV_MASK << EPLL_CON0_SDIV_SHIFT); + + for (i = 0; i < ARRAY_SIZE(exynos5_epll_div); i++) { + if (exynos5_epll_div[i].freq_out == rate) + break; + } + + if (i == ARRAY_SIZE(exynos5_epll_div)) + return -1; + + epll_con_k = exynos5_epll_div[i].k_dsm << 0; + epll_con |= exynos5_epll_div[i].en_lock_det << + EPLL_CON0_LOCK_DET_EN_SHIFT; + epll_con |= exynos5_epll_div[i].m_div << EPLL_CON0_MDIV_SHIFT; + epll_con |= exynos5_epll_div[i].p_div << EPLL_CON0_PDIV_SHIFT; + epll_con |= exynos5_epll_div[i].s_div << EPLL_CON0_SDIV_SHIFT; + + /* + * Required period ( in cycles) to genarate a stable clock output. + * The maximum clock time can be up to 3000 * PDIV cycles of PLLs + * frequency input (as per spec) + */ + lockcnt = 3000 * exynos5_epll_div[i].p_div; + + writel(lockcnt, &clk->epll_lock); + writel(epll_con, &clk->epll_con0); + writel(epll_con_k, &clk->epll_con1); + + start = get_timer(0); + + while (!(readl(&clk->epll_con0) & + (0x1 << EXYNOS5_EPLLCON0_LOCKED_SHIFT))) { + if (get_timer(start) > TIMEOUT_EPLL_LOCK) { + debug("%s: Timeout waiting for EPLL lock\n", __func__); + return -1; + } + } + return 0; +} + +void exynos5_set_i2s_clk_source(void) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + + clrsetbits_le32(&clk->src_peric1, AUDIO1_SEL_MASK, + (CLK_SRC_SCLK_EPLL)); +} + +int exynos5_set_i2s_clk_prescaler(unsigned int src_frq, + unsigned int dst_frq) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + unsigned int div; + + if ((dst_frq == 0) || (src_frq == 0)) { + debug("%s: Invalid requency input for prescaler\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + + div = (src_frq / dst_frq); + if (div > AUDIO_1_RATIO_MASK) { + debug("%s: Frequency ratio is out of range\n", __func__); + debug("src frq = %d des frq = %d ", src_frq, dst_frq); + return -1; + } + clrsetbits_le32(&clk->div_peric4, AUDIO_1_RATIO_MASK, + (div & AUDIO_1_RATIO_MASK)); + return 0; +} + +/** + * Linearly searches for the most accurate main and fine stage clock scalars + * (divisors) for a specified target frequency and scalar bit sizes by checking + * all multiples of main_scalar_bits values. Will always return scalars up to or + * slower than target. + * + * @param main_scalar_bits Number of main scalar bits, must be > 0 and < 32 + * @param fine_scalar_bits Number of fine scalar bits, must be > 0 and < 32 + * @param input_freq Clock frequency to be scaled in Hz + * @param target_freq Desired clock frequency in Hz + * @param best_fine_scalar Pointer to store the fine stage divisor + * + * @return best_main_scalar Main scalar for desired frequency or -1 if none + * found + */ +static int clock_calc_best_scalar(unsigned int main_scaler_bits, + unsigned int fine_scalar_bits, unsigned int input_rate, + unsigned int target_rate, unsigned int *best_fine_scalar) +{ + int i; + int best_main_scalar = -1; + unsigned int best_error = target_rate; + const unsigned int cap = (1 << fine_scalar_bits) - 1; + const unsigned int loops = 1 << main_scaler_bits; + + debug("Input Rate is %u, Target is %u, Cap is %u\n", input_rate, + target_rate, cap); + + assert(best_fine_scalar != NULL); + assert(main_scaler_bits <= fine_scalar_bits); + + *best_fine_scalar = 1; + + if (input_rate == 0 || target_rate == 0) + return -1; + + if (target_rate >= input_rate) + return 1; + + for (i = 1; i <= loops; i++) { + const unsigned int effective_div = max(min(input_rate / i / + target_rate, cap), 1); + const unsigned int effective_rate = input_rate / i / + effective_div; + const int error = target_rate - effective_rate; + + debug("%d|effdiv:%u, effrate:%u, error:%d\n", i, effective_div, + effective_rate, error); + + if (error >= 0 && error <= best_error) { + best_error = error; + best_main_scalar = i; + *best_fine_scalar = effective_div; + } + } + + return best_main_scalar; +} + +static int exynos5_set_spi_clk(enum periph_id periph_id, + unsigned int rate) +{ + struct exynos5_clock *clk = + (struct exynos5_clock *)samsung_get_base_clock(); + int main; + unsigned int fine; + unsigned shift, pre_shift; + unsigned mask = 0xff; + u32 *reg; + + main = clock_calc_best_scalar(4, 8, 400000000, rate, &fine); + if (main < 0) { + debug("%s: Cannot set clock rate for periph %d", + __func__, periph_id); + return -1; + } + main = main - 1; + fine = fine - 1; + + switch (periph_id) { + case PERIPH_ID_SPI0: + reg = &clk->div_peric1; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI1: + reg = &clk->div_peric1; + shift = 16; + pre_shift = 24; + break; + case PERIPH_ID_SPI2: + reg = &clk->div_peric2; + shift = 0; + pre_shift = 8; + break; + case PERIPH_ID_SPI3: + reg = &clk->sclk_div_isp; + shift = 0; + pre_shift = 4; + break; + case PERIPH_ID_SPI4: + reg = &clk->sclk_div_isp; + shift = 12; + pre_shift = 16; + break; + default: + debug("%s: Unsupported peripheral ID %d\n", __func__, + periph_id); + return -1; + } + clrsetbits_le32(reg, mask << shift, (main & mask) << shift); + clrsetbits_le32(reg, mask << pre_shift, (fine & mask) << pre_shift); + + return 0; ++ + static unsigned long exynos4_get_i2c_clk(void) + { + struct exynos4_clock *clk = + (struct exynos4_clock *)samsung_get_base_clock(); + unsigned long sclk, aclk_100; + unsigned int ratio; + + sclk = get_pll_clk(APLL); + + ratio = (readl(&clk->div_top)) >> 4; + ratio &= 0xf; + aclk_100 = sclk / (ratio + 1); + return aclk_100; } unsigned long get_pll_clk(int pllreg) diff --cc board/samsung/universal_c210/universal.c index afe3bb0aeb,36a047217c..1e67dea2ae --- a/board/samsung/universal_c210/universal.c +++ b/board/samsung/universal_c210/universal.c @@@ -30,14 -27,10 +30,18 @@@ #include #include #include +#include +#include +#include +#include +#include +#include +#include +#include + #include + #include + #include + #include DECLARE_GLOBAL_DATA_PTR; diff --cc drivers/power/power_fsl.c index 0000000000,651f88f850..af4663dd25 mode 000000,100644..100644 --- a/drivers/power/power_fsl.c +++ b/drivers/power/power_fsl.c @@@ -1,0 -1,69 +1,75 @@@ + /* + * Copyright (C) 2011 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + #include + #include + #include + #include + #include + ++#if defined(CONFIG_PMIC_FSL_MC13892) ++#define FSL_PMIC_I2C_LENGTH 3 ++#elif defined(CONFIG_PMIC_FSL_MC34704) ++#define FSL_PMIC_I2C_LENGTH 1 ++#endif ++ + #if defined(CONFIG_POWER_SPI) + static u32 pmic_spi_prepare_tx(u32 reg, u32 *val, u32 write) + { + return (write << 31) | (reg << 25) | (*val & 0x00FFFFFF); + } + #endif + + int pmic_init(unsigned char bus) + { + static const char name[] = "FSL_PMIC"; + struct pmic *p = pmic_alloc(); + + if (!p) { + printf("%s: POWER allocation error!\n", __func__); + return -ENOMEM; + } + + p->name = name; + p->number_of_regs = PMIC_NUM_OF_REGS; + + #if defined(CONFIG_POWER_SPI) + p->interface = PMIC_SPI; + p->bus = CONFIG_FSL_PMIC_BUS; + p->hw.spi.cs = CONFIG_FSL_PMIC_CS; + p->hw.spi.clk = CONFIG_FSL_PMIC_CLK; + p->hw.spi.mode = CONFIG_FSL_PMIC_MODE; + p->hw.spi.bitlen = CONFIG_FSL_PMIC_BITLEN; + p->hw.spi.flags = SPI_XFER_BEGIN | SPI_XFER_END; + p->hw.spi.prepare_tx = pmic_spi_prepare_tx; + #elif defined(CONFIG_POWER_I2C) + p->interface = PMIC_I2C; + p->hw.i2c.addr = CONFIG_SYS_FSL_PMIC_I2C_ADDR; - p->hw.i2c.tx_num = 3; - p->bus = bus; ++ p->hw.i2c.tx_num = FSL_PMIC_I2C_LENGTH; ++ p->bus = I2C_PMIC; + #else + #error "You must select CONFIG_POWER_SPI or CONFIG_PMIC_I2C" + #endif + + return 0; + } diff --cc drivers/video/Makefile index b3207c83c3,cc3022a2c7..170a358b52 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@@ -37,9 -37,9 +37,10 @@@ COBJS-$(CONFIG_EXYNOS_PWM_BL) += exynos COBJS-$(CONFIG_FSL_DIU_FB) += fsl_diu_fb.o videomodes.o COBJS-$(CONFIG_S6E8AX0) += s6e8ax0.o COBJS-$(CONFIG_S6E63D6) += s6e63d6.o +COBJS-$(CONFIG_LD9040) += ld9040.o COBJS-$(CONFIG_SED156X) += sed156x.o COBJS-$(CONFIG_VIDEO_AMBA) += amba.o + COBJS-$(CONFIG_VIDEO_COREBOOT) += coreboot_fb.o COBJS-$(CONFIG_VIDEO_CT69000) += ct69000.o videomodes.o COBJS-$(CONFIG_VIDEO_DA8XX) += da8xx-fb.o videomodes.o COBJS-$(CONFIG_VIDEO_MB862xx) += mb862xx.o videomodes.o diff --cc include/configs/mx53evk.h index c472075c9a,1916b85e28..a0af3eeb26 --- a/include/configs/mx53evk.h +++ b/include/configs/mx53evk.h @@@ -55,11 -55,10 +55,11 @@@ #define CONFIG_SYS_I2C_SPEED 100000 /* PMIC Configs */ - #define CONFIG_PMIC - #define CONFIG_PMIC_I2C - #define CONFIG_PMIC_FSL + #define CONFIG_POWER + #define CONFIG_POWER_I2C + #define CONFIG_POWER_FSL #define CONFIG_SYS_FSL_PMIC_I2C_ADDR 8 +#define CONFIG_PMIC_FSL_MC13892 #define CONFIG_RTC_MC13XXX /* MMC Configs */ diff --cc include/configs/seaboard.h index c2d1c66215,ab10bd0abc..de0c777819 --- a/include/configs/seaboard.h +++ b/include/configs/seaboard.h @@@ -103,18 -99,10 +103,16 @@@ #define CONFIG_TEGRA_KEYBOARD #define CONFIG_KEYBOARD - #undef TEGRA_DEVICE_SETTINGS - #define TEGRA_DEVICE_SETTINGS "stdin=serial,tegra-kbc\0" \ - "stdout=serial,lcd\0" \ - "stderr=serial,lcd\0" + /* USB keyboard */ + #define CONFIG_USB_KEYBOARD -#include "tegra-common-post.h" +/* LCD support */ +#define CONFIG_LCD +#define CONFIG_PWM_TEGRA +#define CONFIG_VIDEO_TEGRA +#define LCD_BPP LCD_COLOR16 +#define CONFIG_SYS_WHITE_ON_BLACK +#define CONFIG_CONSOLE_SCROLL_LINES 10 /* NAND support */ #define CONFIG_CMD_NAND diff --cc include/configs/smdk5250.h index e412da8c9d,39a347af84..9ee462f0ca --- a/include/configs/smdk5250.h +++ b/include/configs/smdk5250.h @@@ -207,33 -203,8 +207,34 @@@ #define CONFIG_I2C_MULTI_BUS #define CONFIG_MAX_I2C_NUM 8 #define CONFIG_SYS_I2C_SLAVE 0x0 + #define CONFIG_I2C_EDID +/* PMIC */ +#define CONFIG_PMIC +#define CONFIG_PMIC_I2C +#define CONFIG_PMIC_MAX77686 + +/* SPI */ +#define CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_SPI_FLASH + +#ifdef CONFIG_SPI_FLASH +#define CONFIG_EXYNOS_SPI +#define CONFIG_CMD_SF +#define CONFIG_CMD_SPI +#define CONFIG_SPI_FLASH_WINBOND +#define CONFIG_SF_DEFAULT_MODE SPI_MODE_0 +#define CONFIG_SF_DEFAULT_SPEED 50000000 +#define EXYNOS5_SPI_NUM_CONTROLLERS 5 +#endif + +#ifdef CONFIG_ENV_IS_IN_SPI_FLASH +#define CONFIG_ENV_SPI_MODE SPI_MODE_0 +#define CONFIG_ENV_SECT_SIZE CONFIG_ENV_SIZE +#define CONFIG_ENV_SPI_BUS 1 +#define CONFIG_ENV_SPI_MAX_HZ 50000000 +#endif + /* Ethernet Controllor Driver */ #ifdef CONFIG_CMD_NET #define CONFIG_SMC911X diff --cc include/configs/tegra-common-post.h index 2d0d61dc9d,6f310bee60..ee40cc2a3e --- a/include/configs/tegra-common-post.h +++ b/include/configs/tegra-common-post.h @@@ -146,6 -165,25 +146,25 @@@ "fdt_addr_r=0x02000000\0" \ "ramdisk_addr_r=0x02100000\0" \ + #ifdef CONFIG_TEGRA_KEYBOARD + #define STDIN_KBD_KBC ",tegra-kbc" + #else + #define STDIN_KBD_KBC "" + #endif + + #ifdef CONFIG_USB_KEYBOARD + #define STDIN_KBD_USB ",usbkbd" + #define CONFIG_SYS_USB_EVENT_POLL + #define CONFIG_PREBOOT "usb start" + #else + #define STDIN_KBD_USB "" + #endif + + #define TEGRA_DEVICE_SETTINGS \ + "stdin=serial" STDIN_KBD_KBC STDIN_KBD_USB "\0" \ - "stdout=serial\0" \ - "stderr=serial\0" \ ++ "stdout=serial,lcd\0" \ ++ "stderr=serial,lcd\0" \ + #define CONFIG_EXTRA_ENV_SETTINGS \ TEGRA_DEVICE_SETTINGS \ MEM_LAYOUT_ENV_SETTINGS \ diff --cc include/power/max8998_pmic.h index 0000000000,ca21f882c2..0e559f986a mode 000000,100644..100644 --- a/include/power/max8998_pmic.h +++ b/include/power/max8998_pmic.h @@@ -1,0 -1,86 +1,88 @@@ + /* + * Copyright (C) 2011 Samsung Electronics + * Lukasz Majewski + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + + #ifndef __MAX8998_PMIC_H_ + #define __MAX8998_PMIC_H_ + + /* MAX 8998 registers */ + enum { + MAX8998_REG_IRQ1, + MAX8998_REG_IRQ2, + MAX8998_REG_IRQ3, + MAX8998_REG_IRQ4, + MAX8998_REG_IRQM1, + MAX8998_REG_IRQM2, + MAX8998_REG_IRQM3, + MAX8998_REG_IRQM4, + MAX8998_REG_STATUS1, + MAX8998_REG_STATUS2, + MAX8998_REG_STATUSM1, + MAX8998_REG_STATUSM2, + MAX8998_REG_CHGR1, + MAX8998_REG_CHGR2, + MAX8998_REG_LDO_ACTIVE_DISCHARGE1, + MAX8998_REG_LDO_ACTIVE_DISCHARGE2, + MAX8998_REG_BUCK_ACTIVE_DISCHARGE3, + MAX8998_REG_ONOFF1, + MAX8998_REG_ONOFF2, + MAX8998_REG_ONOFF3, + MAX8998_REG_ONOFF4, + MAX8998_REG_BUCK1_VOLTAGE1, + MAX8998_REG_BUCK1_VOLTAGE2, + MAX8998_REG_BUCK1_VOLTAGE3, + MAX8998_REG_BUCK1_VOLTAGE4, + MAX8998_REG_BUCK2_VOLTAGE1, + MAX8998_REG_BUCK2_VOLTAGE2, + MAX8998_REG_BUCK3, + MAX8998_REG_BUCK4, + MAX8998_REG_LDO2_LDO3, + MAX8998_REG_LDO4, + MAX8998_REG_LDO5, + MAX8998_REG_LDO6, + MAX8998_REG_LDO7, + MAX8998_REG_LDO8_LDO9, + MAX8998_REG_LDO10_LDO11, + MAX8998_REG_LDO12, + MAX8998_REG_LDO13, + MAX8998_REG_LDO14, + MAX8998_REG_LDO15, + MAX8998_REG_LDO16, + MAX8998_REG_LDO17, + MAX8998_REG_BKCHR, + MAX8998_REG_LBCNFG1, + MAX8998_REG_LBCNFG2, + PMIC_NUM_OF_REGS, + }; + + #define MAX8998_LDO3 (1 << 2) + #define MAX8998_LDO4 (1 << 1) ++#define MAX8998_LDO7 (1 << 6) + #define MAX8998_LDO8 (1 << 5) ++#define MAX8998_LDO17 (1 << 4) + #define MAX8998_SAFEOUT1 (1 << 4) + + #define MAX8998_I2C_ADDR (0xCC >> 1) + + enum { LDO_OFF, LDO_ON }; + + #endif /* __MAX8998_PMIC_H_ */